Network Pan-Focus PTZ
VDC-DPN9585P
Dome Cameras
VCC-PN9575P
Network Indoor Mini
Dome Camera
VCC-PN9575P
Built-in X2.6 Motorized Zoom
Pan-Focus Lens
(f = 2.8–7.3 mm, F = 1.9–3.0) No focus adjustments
Pan-focus lens image Varifocal lens image
Comparative images are representations only.
Network Vandal-Resistant
Day/Night Dome Camera
VDC-DPN9585P
• Networked Surveillance with
Two-Way Voice Communications
• Power-over-Ethernet (PoE)
Supported (IEEE 802.3af Compliant)
• PTZ Control & Remote Camera
Setting via Network or VAC-70
• 25 IPS, High-Resolution
Image Selection
• Vandal-Resistant
• IP66 Rated Enclosure
*VDC-DPN9585P
*
*
The products introduced here are manufactured in Japan
utilizing advanced technologies and quality control.
High-Performance Network Cameras
Enabling Video Monitoring with Audio
Network 1/4” Color CCD DSP High-Resolution
Day/Night Vandal-Resistant PTZ Dome Camera
VDC-DPN9585P
Wide Area Surveillance with a x2.6
Pan-Focus Lens and PTZ Control
Deep focus technology brings every area on-screen
into crisp and clear focus for a precise picture with
greater depth of field. In addition to the pan-focus
lens developed by SANYO, VDC-DPN9585P and VCCPN9575P cameras feature pan-tilt-zoom (PTZ)
functions allowing remote control over a network for
surveillance of wide areas.
• Clear focus on entire
viewing area with
great depth of field
• No focus adjustments
• Remote zoom
adjustment via
Network or VAC-70
Pan-focus lens image
• Clear focusing on
a specific area
• Manual focus
adjustments
• Manual zoom
adjustments
Varifocal lens image
Network 1/4” Color CCD DSP
High-Resolution PTZ Dome Camera
VCC-PN9575P
SANYO Security Systems for the Creation of a
Full-fledged LAN or Internet
Video captured by camera can be viewed using the bundled
VA-SW3050LITE viewer software. Use of the VA-SW3050 archiving
software (sold separately) allows simultaneous monitoring of streams
from up to 128 cameras as well as recording of
live audio and video data.
* Use of the VDC-DPN9585P’s or the VCC-PN9575P’s built-in
networking features allows viewing of video from a single
camera with a generic web browser (Internet Explorer).
Digital Image Processing Suited to
Networked Output
Image processing of JPEG images offering versatility has been adopted for transmission of high-quality images. This lightens the burden placed on the network
and increases precision in surveillance.
Alarm Notification Functions
When a potential security threat is detected, a single surveillance video image
from that moment is sent by email as an
alarm notification. Email addresses can
be set in advance so that notification is
sent to up to five locations.
INTERNET
Two-Way Voice Transmissions between Camera and PC
Two-way communications inclusive of voice exchanges
between a control room and surveillance points allow instruc-
Networked Centralized Control
of Data from a Variety of
Surveillance Points
Management of video from surveillance points under a variety of conditions — whether outdoors, at remote locations, or at night — can
be consolidated at a PC in a control
center. This enables efficient operation of 24/7 systems and broadbased surveillance for retail outlets
or large-scale facilities.
tions issued from the control room to surveillance points while viewing images sent from
cameras or, conversely, voicing of opinions from
surveillance points to the control room.
Voice Communications
VDC-DPN9585P/VCC-PN9575P
Surveillance-Point Monitoring with
Video and Audio Data
The VDC-DPN9585P and the VCC-PN9575P are equipped to
enable two-way voice communications via audio signals sent
between cameras and PCs. Transmission of crystal clear
images together with audio offers those overseeing
surveillance as a sense of being right there at the scene.
Audio Transmission from
Control Center PC to Surveillance Point
Audio transmissions can be sent from the administrator’s side
to the camera so as to provide advice or cautionary notices in
the event of unaccounted for activity and other events during
surveillance. Voice exchanges with personnel at surveillance
points not only enable a more accurate grasp of the situation
but also serve to prevent crimes or accidents.
Monitor
Camera
Video and Audio Data
Audio Data / Power Supply* / Mechanical Control
Speaker
LAN cable
Microphone MicrophonePC
• The VCC-PN9575P features a built-in microphone.
• Both the VDC-DPN9585P and the VCC-PN9575P can be connected to external microphones, speakers and monitors.
* Power adapter required.
Connection Examples
Both the VDC-DPN9585P and the VCC-PN9575P support the
IEEE 802.3af standard for Power-over-Ethernet (PoE) applications to allow power supplied over LAN cabling. In addition to
making installation easier, this allows camera installation in
places where it would otherwise be difficult to secure a power source.
• LAN cable types required will vary according to the switching hub or
router used.
• Do not use the camera’s power supply when using PoE.
• The VA-50H heater board (sold separately) for use with the VDC-
DPN9585P cannot be used when using PoE.
Speaker
PoE Example 1:
Use of Power Adapter and Port-Switching Hub
LAN Cable (Straight Type)
Up to 100 Meters
LAN Cable (Straight Type)
Video/Audio Data + Power Supply
Audio Sent to Camera Side
Audio Confirmed on PC Side
TV Monitor
Speaker
Microphone
Video Output
(BNC Connector)
Audio Output
(3.5 mm Mini Jack)
External Mic Intput
( 3.5 mm Mini Jack)
Switching Hub
Up to 100 Meters
Example of Use without PoE
Basic Connection
Connection by LAN cabling (crossed type)
between camera and PC.
LAN Cable
(Crossed Type)
PC
Speaker
TV Monitor
PC
PoE Supported
Adapter
Microphone
Microphone
• Longer transmission distances are possible than those using a power adapter
and a switching hub as in example 1.
LAN Connection
Connection of camera to LAN by LAN cable
(straight type) using switching hub, etc.
Switching Hub
LAN Cable
(Straight Type)
PoE Example 2:
Use of PoE Supported Switching Hub
LAN Cable (Straight Type)
Up to 100 Meters
Speaker
Video Output
(BNC Connector)
Audio Output
(3.5 mm Mini Jack)
External Mic Intput
(3.5 mm Mini Jack)
LAN
PoE Supported
Switching Hub
Video/Audio Data
+ Power Supply
Internet Connection
Connection of camera and router by LAN cable
or ADSL modem, etc. when used for LAN connection.
Speaker
PC
Microphone
Audio Sent to Camera Side
Audio Confirmed on PC Side
Router or ADSL Modem
Internet
AC Adapter
AC Adapter AC Adapter
• Router connected using straight type cabling.
• Confirm connection method when connecting
an ADSL modem or other device.
• Please use a type of LAN cabling that is shielded.
Network Archiving Software
VA-SW3050
(Sold separately)
The VDC-DPN9585P and the VCC-PN9575P are bundled with
VA-SW3050LITE viewer software allowing live video streams
sent from cameras to be monitored on a PC. This software
also supports audio transmissions and remote control of cameras, making it excellent for smooth configuration and management of surveillance systems.
VA-SW3050 network archiving software is sold separately in
answer to needs for archiving of surveillance video and audio
captured by cameras. With a PC used as a local server, the
VA-SW3050 software enables not only data playback and recording but also improved system operability, making it a
powerful tool for network management.
Simultaneous Recording from Up to 128 Cameras
VA-SW3050 software simultaneously records video and audio
data from up to 128 cameras. High-resolution images are
recorded at a rate of 25 IPS* for smooth playback comparable
with television.
*CPU: Pentium 4, 3.06 GHz or higher, Memory: 512 MB RAM
Picture setting: BASIC, Picture size: 720 x 286, Single camera connection
Main window
Camera layout setting
Surveillance Camera Control via Network
Setting of camera IDs allows precise condition setting for
each surveillance point. Also enabled is control of panning, tilting, zooming and other camera functions.
Simultaneous Access by Up to 16 Users
Recorded video and audio can be accessed by up to 16 users
simultaneously. User access is managed by password to
differentiate those at the administrator level, with the authority to alter settings, and those at the user level, with the right
to monitor surveillance video and audio.
Other Features
• Display switching between full, quad or 16 split screen
• Simultaneous playback and recording of video and audio
• Flexible settings with a wide array of recording modes
• Easy-to-use graphical interface
• Time data search function
• Alarm search function
• Timer recording
VA-SW3050LITE/VA-SW3050 Feature Comparison
Number of cameras supported
Number of users supported
Search camera
Live monitor
Camera control
PTZ, etc.
Menu
Recording
Playback
Video search
Backup/Restore
Download/Print
VA-SW3050LITE
(Bundled)
Max. 128
Max. 16
Yes
Yes
Yes
Yes
No
No
No
No
No
VA-SW3050
(Sold separately)
Max. 128
Max. 16
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Camera control
16-screen display
VA-SW3050LITE/VA-SW3050 System Requirements
PC
OS
CPU/
Memory
Network
interface
Display card
Audio
Component
IBM PC/AT and compatibles
®
Windows
SP2, Windows
When the number of cameras connected is 4 or fewer:
CPU: Pentium
When the number of cameras connected is between 5 and 16:
CPU: Pentium
MEMO (VA-SW3050):
When you record live video from 17 or more cameras simultaneously on a single PC, recording performance may be diminished
depending on your monitoring system configuration. In such
cases, add PCs used for recording so that the number of cameras
to record simultaneously per PC becomes 16 or fewer.
100Base-TX
1024 x 768 pixels or higher, 16 million colors or higher
AGP graphics card supporting hardware overlay
or PCI Express graphics card (Requires the latest DirectX 9.0c
compatible driver.)
Recommended graphics chip
ATI: RADEON 9000 series or higher
nVidia: GeForce 4 series or higher
Matrox: MillenniumP series or higher
Sound card and speakers with 100% DirectX compatibility
DirectX 9.0c
2000 Professional SP4, Windows® XP Home Edition
®
XP Professional SP2
®
4, 2.0 GHz or higher, Memory: 512 MB or more
®
4, 3.0 GHz or higher, Memory: 1 GB or more
Quadro 4 series or higher
Functions Specific to the
VDC-DPN9585P/VCC-PN9575P
Intelligent Backlight Compensation
The VDC-DPN9585P and VCC-PN9575P feature two selectable
backlight compensation modes: multi-spot metering (applied to
the whole screen) and center-zone metering (applied to the
central portion only).
Multi-spot metering measures luminous intensity in 64 areas on screen to enable
optimal backlight compensation even for peripheral and moving objects.
16 Preset Positioning and
Sequential Monitoring
Functions
Up to 16 preset positions (with
different settings for pan, tilt and
zoom) can be registered for a
single VDC-DPN9585P or VCCPN9575P. A simple key entry to
a controller allows you to easily switch to the scene you want to
monitor. Auto-pan monitoring can be also be programmed by
designating two end points on a horizontal plane.
PTZ Operations
Both the VDC-DPN9585P and VCC-PN9575P come with a PT
mechanism and allow panning of 335 degrees (110 degrees*)
and tilting of 90 degrees (90 degrees*) to reduce blind spots in
the surveillance area. When particular angles are preset on the
camera (up to sixteen points), it moves to each position quickly at the speed of 120 deg/sec. max. for both panning and tilting. Combining these features with the motion detector, it is
possible to catch all actions taking place in the area.
*For wall-mounted cameras
Photos of VDC-DPN9585P
Flexible Motion Detection
Sensing is performed by splitting the field of view into 16
areas. Movement and brightness levels within the picture are
analyzed to accurately detect surveillance targets. Upon detection, the camera sends an alarm status signal and captures the
object at zoom magnifications of up to x2.6. Fine adjustments
of settings such as sensitivity, tracking time, zoom ratio and
areas not requiring detection can also be made.
x2.6
Areas with swaying trees or flickering light, etc. can be eliminated to avoid false
alarms. Surveillance of the detected object can be conducted at a zoom magnification
of x1.0, x1.4, x2.0 or x2.6.
Privacy Masking (Up to 8
Masks)
When there is a house or even
an object as small as a window
within the camera frame, it is
possible to mask the area so that
it will not appear on the monitor
screen to protect other’s privacy.
Up to 8 rectangular masks of arbitrary size can be set. These
masking areas may be protected with a 4-digit (max.) password.
Ceilling mounting Wall mounting
Panning
Tilting
0 to 335°
0 to 90°
Panning
Tilting
–55 to 55°
0 to –90°
Adjustment via VAC-70 Control Unit (Sold Separately)
Connection of the VAC-70 control unit allows adjustment of
pan/tilt, angle of view, motion detector, backlight compensation and other functions from in front of a monitor. The lens
angle can be adjusted directly via a control
switch inside the camera housing.
Video coaxial cable
VDC-DPN9585P
Control switch
inside camera
VAC-70 Monitor
520 TV Line Resolution (Analog Video Signal)
Featuring SANYO’s DSP circuitry and a high performance 1/4inch CCD for horizontal resolution of more than 520 TV lines
and superior color reproduction. Sharp, crisp images are
delivered for greater precision in surveillance under a varied
range of conditions.
Built-in Electronic Shutter
A high-speed electronic shutter that is internally switchable for
eight modes using a DIP switch allows adjustment increments
from 1/50 to 1/10,000 sec.
Operation on PoE, AC or DC Power Sources
The VDC-DPN9585P and VCC-PN9575P can operate on PoE,
12 V DC (12–15V DC) or 24 V AC (50 Hz, and even at a tolerance of ±10%). Switching to the correct mode occurs automatically when power is supplied.
Functions Specific to the
VDC-DPN9585P
Intelligent Switching from Color to B/W
Proprietary auto-switching
infrared cut filter
Switchover point
Tough Die-Cast Aluminum with
Polycarbonate Dome
Housed in an exceptionally tough die-cast
aluminum enclosure and a polycarbonate
Lx
B/W
mode
Color mode IR cut filter ON
B/W
mode
3~9 lx
1~3 lx
High mode
Low mode
dome for extra durability under the most demanding of conditions. To protect against tampering, the screws of the enclosure cover have a unique shape that prevents it from being
opened with ordinary tools.
Time
B/W mode
Color mode
(Approx.)
Switching between color mode during daylight hours and
monochrome at night is done automatically (manual switching
also possible). Selection of switching settings can be made
from a range of 1 to 10 lx.
IP66 Rated Weatherproof Design
High Sensitivity,
Minimum Required
Illumination
User-Friendly Design and Easy Setup
VDC-DPN9585P/VCC-PN9575P
Installation, Setup and Operation Made Easy by
Simple, User-Friendly Design
Based on a development concept featuring a pan-focus lens for
the realization of advanced surveillance functions together with
enhanced operability and ease of installation. The VDC-DPN9585P
and VCC-PN9575P increase lens function and camera maneuverability to simplify operation, save resources spent in installation
and substantially heighten the available degree of freedom.
Mounting and Installation
The product pictured below is the VDC-DPN9585P. Specifications differ slightly in the case of the VCC-PN9575P.
Please refer to the operating instructions supplied with each product for details.
Easy Interior Access and Setup
Inside the housings of the VDC-DPN9585P and VCC-PN9575P
are camera units with integrated motors and lenses. Installation
on ceilings or walls can be accomplished without difficulty and
components such as the camera unit or an optional heater
board* can be attached and detached easily in just a few steps.
*The heater board option can be mounted only in the VDC-DPN9585P.
(F1.9, 20 IRE)
(F1.9, 50 IRE)
B/W mode
0.024 lx
0.06 lx
Color mode
Gain: HighGain: High
0.48 lx
1.2 lx
The camera unit and board
can be attached or detached
by simply sliding the stopper.
Attach the camera unit to the bottom
cover mounted at the surveillance
point (ceiling or wall).
In the case of the VCC-PN9575P
Push
Bottom
cover
Hold down the button on the side of the housing and
detach the base plate from the back of the camera.
Mounting Brackets (Options)
Attachment
VA-50AL
42.0
(1.65)
46.0
(1.81)
Model name
VDC-DPN9585P
VCC-PN9575P
(for VDC-DPN9585P)
8.0 (0.31)
82.5
(3.25)
R18.7 (0.74)
22.4 (0.88)
3.4 (0.13)
M4 8 4
<M25 15>
167.3 (6.59)
162.8 (6.41)
Installation
Wall mounting
Long ceiling mounting
Short ceiling mounting
Wall mounting
Long ceiling mounting
Short ceiling mounting
93°
0.3 (0.01)
Attachment
VA-50AS (for VCC-PN9575P)
0.5
(0.02)
4.5 (0.18)
R154.9
(6.10)
R151.9
(5.98)
ø150 (5.91)
41.7 (1.64)
22.8
(0.90)
22.8
(0.90)
Attachment + Brackets
VA-50AL + VA-50BW
VA-50AL + VA-50BPL
VA-50AL + VA-50BPS
VA-50AS + VA-50BW
VA-50AS + VA-50BPL
VA-50AS + VA-50BPS
83.4
(3.28)
Base
plate
22.4 (0.88)
Set up and adjust according to the installation site.
Note: In the case of a wall mounted setup, hold down the clamp and
release the hooks, then lift the camera unit and turn it 90° to attach it.
Set up and adjust according
to the installation site.
Wall mounting bracket
VA-50BW
209 (8.23)
ø120 (4.72)
83.5 (3.29)
Note: Attachments and brackets presented are for indoor use.
In cases of outdoor use, measures must be implemented to ensure waterproofing.
45.5
(1.79)
66.7
(2.63)
6 (0.24)
M6 *6-2
M24 *P-1.5
Installation is completed by simply
attaching the camera to the base plate.
Ceiling suspension bracket
VA-50BPL VA-50BPS
ø120 (4.72)
205 (8.07)
Minimum Length
440 ±3 (17.32 ±0.12)
1020 ±6 (40.16 ±0.24)
M24 *P-1.5
6 (0.24)
ø120 (4.72)
6 (0.24)
209 (8.23)
Maximum Length
ø7–4 (0.28–0.16)
M6 *6-2
83.5 (3.29)
6 (0.24)
66.7
(2.63)
Wall mounting
Ceilling mounting
Minimum Length
M6 *6-2
300 ±3 (11.81 ±0.12)
M24 *P-1.5
ø7–4 (0.28–0.16)
ø120 (4.72)
Maximum Length
464 ±6 (18.27 ±0.24)
6 (0.24)
83.5 (3.29)
ø120 (4.72)
[Unit: mm (inch)]
6 (0.24)
66.7
(2.63)
VDC-DPN9585P / VCC-PN9575P
Specifications
Model No.
Scanning system
Image sensor
Number of pixels
Horizontal resolution
Day/Night mode
Minimum illumination
(approx.)
50 IRE
Video output
Video S/N ratio
Lens
Depth of field
Pan/tilt range
Pan/tilt speed
Ceiling
Wall
Preset
Manual
Menu
Preset positions
Auto mode
Backlight compensation
White balance
Gain control
Electronic shutter
Gamma
Aperture compensation
Synchronizing system
Camera title
Privacy masking
Alarm input
Alarm output
Motion detector
Communications
Audio compression method
Microphone input
Audio output
Weatherproof standard
Operating
Temperature
environment
Humidity
Power supply
Power consumption (approx.)
Weight (approx.)
Network
Image compression
Resolution
Picture quality
Frame rate
Audio compression method
Microphone
Audio output
Bandwidth
Alarm buffer
Interface
PoE support
Protocols
Simultaneous access capacity
Security
Bundled software
Input
External
Internal
Gain high: 1.2 lx (f1.9, color mode) 0.06 lx (B/W mode)
When heater (VA-50H: option board) is used
When heater (VA-50H: option board) turned on
VDC-DPN9585P VCC-PN9575P
NTSC standard 625 lines, 50 fields/sec.
1/4” Interline transfer method CCD (3.6 x 2.7 mm)
Total: 759 (H) x 596 (V), Effective: 752 (H) x 582 (V)
More than 520 TV lines (Analog video signal)
Auto (low/high)
Color, B/W: external control
1.0 Vp-p/75 ohms, composite, BNC
More than 50 dB (AGC Off)
Built-in motorized zoom pan-focus auto iris lens, f = 2.8–7.3 mm (x2.6), F1.9 –3.0
Focus range: 1 m – ∞
Pan: 0–335 degrees, Tilt: 0–90 degrees
Pan: ±55 degrees, Tilt: 0–90 degrees
Max. 120 degrees/sec.
5–100 degrees/sec.
On screen display, password lock possible
16
Sequential pan / Auto pan
On (multi-spot metering [High/Normal], center-zone metering) / Off
ATW / AWC / Manual (MWB) / Indoor (3200) / Outdoor (5600) / Fluorescent (FLUO)
High / Normal / Off
1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 sec.
0.45 / 1
High plus / High / Normal / Off
Internal synchronization / Line lock
On / Off, up to 16 characters, title position adjustable
On / Off: Max. 8 masked locations
External x 2, NO / NC selectable, Alarm preset function, Alarm zoom function
External x 1, NO / NC selectable
On / Off: Motion zoom function
Simplified controller (VAC-70: separately ordered) supported
G. 711 (192 Kbps), full duplex
-62 to -32 dB (monaural microphone) 3.5mm mini jack
LINE OUT monaural audio output, maximum -8 dB, 3.5mm mini jack
IP66
-10 to +50°C (14 to 122°F)
-30 to +50°C (-22 to +122°F)
with power source connected
Less than 90% RH (no condensation)
24 V AC ±10%, 50Hz or 12–15 V DC, supplied through PoE (compliant with IEEE 802.3af)
10 W
Max. 15.5 W
1520 g
JPEG
720 x 286, 640 x 480 (disabled during voice communications), 360 x 286, 180 x 143
5 levels
Max. 25 IPS (720 x 286)
G.711 (192 Kbps), full duplex
-62 to -32 dB (monaural microphone) 3.5mm mini jack
—
LINE OUT monaural audio output, maximum -8 dB, 3.5mm mini jack
128, 256, 512 Kbps, 1, 2, 3, 4 Mbps, no limitation
Up to 8 MB; configurable
10BASE-T/100BASE-TX (RJ45 connector)
Compliant with IEEE 802.3af
TCP, UDP, HTTP, HTTPS, SMTP, NTP, DHCP, FTP, UPnP
Image: Maximum 16, Voice: Maximum 16 (admin: 1)
BASIC authentication (ID/password), SSL supported (image only)
VA-SW3050LITE
—
Gain high: 1.9 lx (F1.9)
—
-10 to +40°C (14 to 104°F)
10 W
650 g
Internal or external selected
Dimensions
[Unit: mm (inch)]
VDC-DPN9585P VCC-PN9575P
ø150.6 (6.0)
ø99.8 (4.0)
88.0 (3.5)
83.4 (3.3)
114.8 (4.6)
32.0
(1.3)
ø162.0 (6.5)
46.0
(1.8)
2–ø4.3
88.0 (3.5)
5.0 (0.2)
35.0
(1.4)
R2.5
8.0 (0.3)
82.5 (3.2)
Options (sold separately)
VA-50H
Heater board
for VDC-DPN9585P
Heater board providing protection from cold for camera unit.
Allows use in –30°C operating environments (24 V AC only).
VCZ-50
Smoked type
dome cover
for VCC-P9574N
VAC-70
Camera
control unit
Pan-Focus Camera Lineup
1/4" Color CCD DSP High-Resolution
VDC-DP7585P
Vandal-Resistant
Day/Night
Dome Camera
VDC-DP9585P
Vandal-Resistant
Day/Night PTZ
Dome Camera
Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries. Intel and Pentium
are trademarks or registered trademarks of Intel
Corporation or its subsidiaries in the U.S. and other
countries. All other trademarks are the property of their
respective owners.
Note:
• Frame rates variable dependant upon network line
conditions and PC performance.
• Because products and software described in this
brochure are subject to continuous improvement;
SANYO reserves the right to modify product specifications, functions and design without notice.
VCC-P7575PA
Indoor Mini
Dome Camera
VCC-P9575P
Indoor Mini PTZ
Dome Camera
VCC-XZ200P
Weatherproof
Day/Night
Zoom Camera
115.5 (4.5)
45.5 (1.8)
Caution: Please consult the instruction manual to ensure safe and proper operation of the product.
DI Company of SANYO Electric Co., Ltd.
obtained Quality Management System
ISO 9001 and Environmental Management
System ISO 14001 certifications.
SANYO Electric Co., Ltd.
www.sanyosecurity.com
©2006 SANYO Printed in Japan ’06.9. MA.
SMS132
Distributed by:
EC00J0303
051
Loading...