Sanyo PDG-DWT50L User Manual
4500 ANSI LUMENS z TRUE WXGA z MULTIMEDIA PROJECTOR
A
–
V
A
•
y
PDG-DWT50L
WXGA Tabletop Multimedia Projector
Lens sold separately
A TABLETOP WITH WIDE RESOLUTION
Offering a wide XGA full (1280 x 768) projection, the PDG-DWT50L makes
it possible to project high-quality HD images from nearly any location. The
PDG-DWT50L, a DLP projector, with its combination of BrilliantColor™
and six-segment color wheel (optional), offers true color reproduction.
(The contrast ratio is a high 2100:1 with DynamicBlack™.)
NETWORK CONTROL / ADMINISTRATION
SANYO’s standard RJ45 LAN feature allows for control and administration
of a projector via a network. Projector status can be monitored and
projector functions can be controlled through a web browser. A notification
can be automatically sent via e-mail whenever the projector encounters a
problem, allowing the administrator to act quickly to resolve any issues.
HELPFUL MAINTENANCE FUNTIONS
The lamp and filter maintenance functions assist in the proper
maintenance of the PDG-DWT50L projector. Easy maintenance access is
provided for lamp and color wheel replacement.
Resolution
Brightness (typical)
Uniformity
DMD Panel System
Number of Pixels
Contrast Ratio
Projection Image (diagonal)
spect Ratio
Throw Distance
Zoom/Focus
Power Lens Shift
Digital Keystone Correction
Projection Lens
Lens Throw Ratio
Projection Lamp
Scanning Frequency
Dot Clock
Color System
Computer Compatibility
Sound Output
oltage
BTU Rating
dB Rating
Power Consumption
Dimensions (WxHxD)
Net Weight
User Maintenance
Input Terminal Panel 1
Input Terminal Panel 2
Input Terminal Panel 3
Input Terminal Panel 4
Input Terminal Panel 5
dditional Input Terminals
EASY POWER OFF AND ON START
The Easy Power Off function allows the projector to be turned off (even
when projecting an image) using a power strip equipped with a switch and
a breaker. The On Start function allows the projector to be turned on by
supplied AC power.
Output Terminals
Included Accessories
DUAL LAMP CONTROL SYSTEM
The two-lamp total control system offers high brightness, improves lamp
life and energy savings, along with redundancy. The power management
Optional Accessories
function shuts the PDG-DWT50L off when input is not detected and helps
maintain lamp life.
BAYONET-STYLE EASY LENS REPLACEMENT
The easy lens attachment (included) makes installation and removal of the
optional lenses quick and easy by a one-touch release button.
DLP® and the DLP logo are registered
trademarks of Texas Instruments.
BrilliantColor™and DynamicBlack™ are
trademarks of Texas Instruments.
PRESENTATION TECHNOLOGIES
21605 Plummer Street
Chatsworth, CA 91311
Ph: 888-337-1215 (toll-free)
Fax 818.717.2719
www.san
oprojectors.com
Warranty
Because its products are subject to continuous improvement, SANYO reserves the right to
modify product design and specifications without notice and without incurring any obligations.
On-Axis
Part No. LNS-W41 LNS-W40 LNS-S40 LNS-T40 LNS-T41
Zoom No Power Power Power Power
Throw
Ratio
F Stop 2.0 1.8-2.3 1.7-1.9 2.1-2.9 2.2-3.1
Length 5.2” 6.42” 5.43” 6.65” 6.06”
Weight 2.2lbs 2.4lbs 1.8lbs 2.6lbs 2.0lbs
Specifications
WXGA (1280 x 768)
4500 ANSI Lumens
85%(Center to Corner)
0.65” Single DLP
2100:1 (with DynamicBlack™ )
40”-500” (Dependent on Lens)
Dependent on Lens
Dependent on Lens
Left/Right Ratio 2:3 – 3:2 (Dependent on Lens)
UXGA, SXGA+,SXGA, WXGA, XGA, SVGA, VGA, MAC
19.9”x7.6”x 15.2”(not including Protrusion & Lens)
DVI-D x1(HDCP) • Audio x1 (stereo mini jack)
Component Video (RCA x3)• L & R Audio (RCA x2)
Wired remote control jack x 1 (stereo mini jack)
• USB x 1(typeB) • RS232C Control Port x 1 (D-sub9pin)
Wired/Wireless I/R Remote Control •VGA Cable
• Batteries (two “AA”) • AC power cord • Wired remote
cable • Lens cover • Owner’s manual(CD-ROM & Quick
Replacement Lamp (610 335 8406)
• Replacement Remote (645 095 1992)
• Optional Lenses (see below)
• Optional 6 segment Color Wheel （POA-CW01）
Up/Down Ratio 1:1
Vert. +/- 40°MAX, Horiz. +/- 35°MAX
Dependent on Lens
260W UHP x 2
H 15kHz, 31-90kHz; V 50-85Hz
PAL/PAL-M/PAL-N/SECAM/NTSC4.43/NTSC
Two-piece stereo 3W
100-240V AC; 50/60/Hz (auto sense/select)
2354.36(Dual lamp mode )
34 dB(eco mode)
36.4 lbs.(w/o Lens)
Clean air filters, replace lamp assembly
D-Sub 15 x1 • Audio x1 (stereo mini jack)
RGBHV or Y/Cb/Cr (BNC x5)
• Audio x1 (stereo mini jack)
Composite Video(RCA x1) • S-Video x1
• L & R Audio (RCA x2)
• RJ45 LAN • Remote control 15pin GPIO
• Screen trigger x 1
D-Sub 15 x 1 • Audio x1 (stereo mini-jack)
Reference Guide) • Security Sticker
Three years parts and labor; 90 days lamp;
Quick Repair Program under warranty
Optional Lens Specifications
Short
Fixed
0.77:1 1.33-
Short
Zoom
1.79:1
STD
Zoom
1.78-
2.35:1
983,040
15:9
Optional
170 MHz
690W
®
Chip
5:-1
Long
Zoom
2.22-
4.43:1
Ultra Long
Zoom
4.43-8.3:1
Issued 11/07 © 2007 SANYO
Loading...