Sanyo MDF-C8V1 User Manual
-80°C Ultra Low Temperature
MDF-C8V
Specifications
Model
Temperature range
Maximum cooling performance
Exterior dimension (W x D x H)
Inner dimension
Effective capacity
Net weight
Storage capacity
Outer door/Inner door
Insulation
Cooling system
Compressor
Refrigerant
Evaporator
Alarm system
MDF-C8V
-60°C to -80°C (1°C increments)
-80°C (Ambient temp. 30°C)
21.6” x 27.0” x 37.2” (550 x 685 x 945 mm)
15.9” x 19.3” x 16.9” (405 x 490 x 430 mm)
3.0cu.ft. (84 Liter)
Approx. 67 kg (148lbs.)
2” box: 42pcs. (SCR-072 x 6 racks) 3” Box: 30 pcs.
Outer Lid: 1piece, Inner Lid: 1 piece
New VIP® Plus™ Rigid polyurethane foam (HC)
115V / 60 Hz / 1 Phase NEMA 5-15P Plug
Rotary type, Outp ut: 400W (1/2 HP)
HFC
Tube on sheet type
s(IGH,OWTEMPALARM#TO#s0OWERFAILUREALARM
s2EMOTEALARMCONTACT$#6!
Features
Performance Data
More advanced insulation system:
V.I.P. PLUS
™
SANYO’s more advanced insulation system
V.I.P. PLUS
™
enables reducing the thick-
ness of insulation to approximately one half
compared to conventional systems. Small
FREEZERSSUCHAS-$TAKESFULLADVAN-
tage of this feature.
Use of V.I.P. PLUS
™
insulation material on
the front, left, and right sides enables a
smaller installation space with the highest-
class storage capacity ratio.
Newly developed single-compressor
system
Use of a newly developed single-compres-
sor system achieves an approximately 40%
reduction in power consumption and en-
ables low-noise operation.
MDF-C8V
Conventional
model*
Rated power consumption
340W/345W
550W/600W
MDF-C8V1Conventional insulation*
Capacity
84L
Capacity
86L
5.65
sq.ft
Installation
space
*SANYO comparison
*SANYO comparison (115V, 60Hz/230V, 50Hz)
*Appearance and specifications are subject to change without notice.
*Cooling performance is indicated by the temperature reached at the cen ter of the freezer (at ambient temperature of 30°C with no load).
lowest temperature.
4.05
sq.ft
MDF-C8V1
V.I.P.® PLUS™ Freezer
The MDF-C8V1’s ideal -80°C freezing environment using V.I.P.®
PLUS™ insulation technology maximizes storage capacity. The
newly developed single-compressor system achieves higher
energy efficiency and space saving construction.
SANYO V.I.P.® PLUS™ Ultra Low Freezers are GREEN
As part of our global commitment to help the environment, SANYO took the initiative to revamp and redesign current refrigeration systems that
resulted in lower operating costs and improved efficiency. SANYO ultra low freezers provide energy savings while minimizing carbon footprint
throughout the laboratory without compromising performance.
SANYO GREEN Benefits:
• Minimize carbon footprint with less impact on the environment.
• Maximize lab space with smaller footprint.
• Emits less heat into the laboratory environment, minimizing air conditioning costs.
New V.I.P.® PLUS™ Technology
Patented revolutionary vacuum insulation cabinet construction reduces wall thickness and achieves greater storage capacity while decreasing
the footprint.
LED Display with Microprocessor Controls
Comprehensive setpoint, alarm, monitoring and diagnostic functions based on SANYO-built microprocessor controller with digital LED display.
SANYO Brand Refrigeration
Single compressor designed by SANYO specifically for demanding ultra low temperature applications in a
laboratory environment.
Evolutionary Design
• SANYO’s most advanced insulation system V.I.P.® PLUS™ enables reduced thickness of insulation to
approximately one half compared to conventional systems. Use of V.I.P. ® PLUS™ insulation material on
the front, left, and right sides enables a smaller installation space with exceptional storage capacity to
foot print ratio.
• Newly developed single-compressor system and enables low-noise operation.
• Achieves 40% higher energy conservation than conventionally insulated models.
• New refrigeration circuit without lter makes the inconvenient customer maintenance procedure of lter
cleaning unnecessary.
Safety and Alarm Features
• Alarm lamp and buzzer offer secure warning of power failure or abnormal temperature changes.
• High and low temperature warning provides an audible and visual alarm when the temperature deviates
more than ±5°C to ±20°C (adjustable) from the set point.
• Alarm ring back function ensures that buzzer will resume operation should alarm conditions continue
after being silenced.
• Control panel with LED digital display for easy operation.
Preservation
My life. My work. My choice.
Specifications
Model MDF-C8V1
Temperature Range -60°C to -80°C (-1°C increments)
Maximum Cooling Performance -80°C (Ambient temp. 30°C)
Exterior Dimension (W x D x H) 21.6" x 27.0" x 37.2" (550 x 685 x 945mm)
Inner Dimension (W x D x H) 15.9" x 19.3" x 16.9" (405 x 490 x 430mm)
Effective Capacity 3.0 cu.ft. (84 liters)
Net Weight Approx. 148 lbs. (67kg)
Storage Capacity 2" box: 42pcs. (SCR-072 x 6 racks) 3" Box: 30pcs
Outer Door/Inner Door Outer Lid: 1 piece, Inner Lid: 1 piece
Insulation New VIP Plus™ Rigid polyurethane foam (HC)
Cooling System 115V / 60Hz / 1 Phase NEMA 5-15P Plug
CompressorRotary type
RefrigerantHFC
Evaporator Tube on sheet type
Alarm System High/Low temp. alarm (±5°C to ±20°C)
Power failure alarm
Remote alarm contact: DC30C, 2A (N.O./N.C.)
MPR-311D(H)
®
GREEN
product
Specifications
Model
Temperature range
Maximum cooling performance
Exterior dimension (W x D x H)
Inner dimension
Effective capacity
Net weight
Storage capacity
Outer door/Inner door
Insulation
Cooling system
Compressor
Refrigerant
Evaporator
Alarm system
MDF-C8V
-60°C to -80°C (1°C increments)
-80°C (Ambient temp. 30°C)
21.6” x 27.0” x 37.2” (550 x 685 x 945 mm)
15.9” x 19.3” x 16.9” (405 x 490 x 430 mm)
3.0cu.ft. (84 Liter)
Approx. 67 kg (148lbs.)
2” box: 42pcs. (SCR-072 x 6 racks) 3” Box: 30 pcs.
Outer Lid: 1piece, Inner Lid: 1piece
New VIP® Plus™ Rigid polyurethane foam (HC)
115V / 60 Hz / 1Phase NEMA 5-15P Plug
Rotary type, Output: 400W (1/2 HP)
HFC
Tube on sheet type
• High/Low temp. alarm (5°C to 20°C) • Power failure alarm
• Remote alarm contact: DC30V, 2A
Options
Pull-down characteristics Pull-up characteristics during power failure CO2 backup system operation characteristics
Performance Data
40
20
0
–20
–120
–40
–60
–80
–100
0 7652 83 41
Temperature (˚C)
Time (hour)
20
0
–20
–40
–60
–80
–100
0 6 75321 84
Temperature (˚C)
Time (hour)
Central air temp. in cabinet
Ambient temp. 30˚C, No-load
5 25201510 30 35
12
10
15
0
Time (hour)
Ambient temperature (˚C)
Ambient temp. and maintenance
of –70˚C by injection of LCO
2 (30kg)
™
™
enables reducing the thick-
™
insulation material on
Newly developed single-compressor
system
Use of a newly developed single-compres-
sor system achieves an approximately 40%
reduction in power consumption and en-
ables low-noise operation.
MDF-C8V
Conventional
model*
Rated power consumption
340W/345W
550W/600W
MTR-C954
CVK-UB4 (I)
LCO2 Back-up
system
Temperature Recorder
Back-up system
mounting kit
MDF-UBK
Inventory rack
SCR-072-I
SCR-053-I
MDF-C8VConventional insulation*
Capacity
84L
Capacity
86L
5.65
sq.ft
*SANYO comparison (115V, 60Hz/230V, 50Hz)
550 (21.6”)
35 (1.4”)
852 (33.5”)
430 (16.9”)
887 (34.9”)
945 (37.2”)
58 (2.3”)
44 (1.7”)
685 (27.0”)
39 (1.5”)
729 (28.7”)
405 (15.9”)
490 (19.3”)
*Appearance and specifications are subject to change without notice.
*Cooling performance is indicated by the temperature reached at the center of the freezer (at ambient temperature of 30°C with no load).
lowest temperature.
4.05
sq.ft
Specifications
Model
Temperature range
Maximum cooling performance
Exterior dimension (W x D x H)
Inner dimension
Effective capacity
Net weight
Storage capacity
Outer door/Inner door
Insulation
Cooling system
Compressor
Refrigerant
Evaporator
Alarm system
MDF-C8V
-60°C to -80°C (1°C increments)
-80°C (Ambient temp. 30°C)
21.6” x 27.0” x 37.2” (550 x 685 x 945 mm)
15.9” x 19.3” x 16.9” (405 x 490 x 430 mm)
3.0cu.ft. (84 Liter)
Approx. 67 kg (148lbs.)
2” box: 42pcs. (SCR-072 x 6 racks) 3” Box: 30 pcs.
Outer Lid: 1piece, Inner Lid: 1piece
New VIP® Plus™ Rigid polyurethane foam (HC)
115V / 60 Hz / 1Phase NEMA 5-15P Plug
Rotary type, Output: 400W (1/2 HP)
HFC
Tube on sheet type
• High/Low temp. alarm (5°C to 20°C) • Power failure alarm
• Remote alarm contact: DC30V, 2A
Options
Pull-down characteristics Pull-up characteristics during power failure CO2 backup system operation characteristics
Performance Data
40
20
0
–20
–120
–40
–60
–80
–100
0 7652 83 41
Temperature (˚C)
Time (hour)
20
0
–20
–40
–60
–80
–100
0 6 75321 84
Temperature (˚C)
Time (hour)
Central air temp. in cabinet
Ambient temp. 30˚C, No-load
5 25201510 30 35
12
10
15
0
Time (hour)
Ambient temperature (˚C)
Ambient temp. and maintenance
of –70˚C by injection of LCO
2 (30kg)
Newly developed single-compressor
system
Use of a newly developed single-compres-
sor system achieves an approximately 40%
reduction in power consumption and en-
ables low-noise operation.
MDF-C8V
Conventional
model*
Rated power consumption
340W/345W
550W/600W
MTR-C954
CVK-UB4 (I)
LCO2 Back-up
system
Temperature Recorder
Back-up system
mounting kit
MDF-UBK
Inventory rack
SCR-072-I
SCR-053-I
*SANYO comparison (115V, 60Hz/230V, 50Hz)
430 (16.9”)
44 (1.7”)
685 (27.0”)
39 (1.5”)
729 (28.7”)
490 (19.3”)
*Appearance and specifications are subject to change without notice.
*Cooling performance is indicated by the temperature reached at the center of the freezer (at ambient temperature of 30°C with no load).
lowest temperature.
Model
Temperature range
Maximum cooling performance
Exterior dimension (W x D x H)
Inner dimension
Effective capacity
Net weight
Storage capacity
Outer door/Inner door
Insulation
Cooling system
Compressor
Refrigerant
Evaporator
Alarm system
MDF-C8V
-60°C to -80°C (1°C increments)
-80°C (Ambient temp. 30°C)
21.6” x 27.0” x 37.2” (550 x 685 x 945 mm)
15.9” x 19.3” x 16.9” (405 x 490 x 430 mm)
3.0cu.ft. (84 Liter)
Approx. 67 kg (148lbs.)
2” box: 42pcs. (SCR-072 x 6 racks) 3” Box: 30 pcs.
Outer Lid: 1piece, Inner Lid: 1piece
New VIP® Plus™ Rigid polyurethane foam (HC)
115V / 60 Hz / 1Phase NEMA 5-15P Plug
Rotary type, Output: 400W (1/2 HP)
HFC
Tube on sheet type
• High/Low temp. alarm (5°C to 20°C) • Power failure alarm
• Remote alarm contact: DC30V, 2A
Pull-down characteristics Pull-up characteristics during power failure CO2 backup system operation characteristics
40
20
0
–20
–120
–40
–60
–80
–100
0 7652 83 41
Temperature (˚C)
Time (hour)
20
0
–20
–40
–60
–80
–100
0 6 75321 84
Temperature (˚C)
Time (hour)
Central air temp. in cabinet
Ambient temp. 30˚C, No-load
5 25201510 30 35
12
10
15
0
Time (hour)
Ambient temperature (˚C)
Ambient temp. and maintenance
of –70˚C by injection of LCO
2
(30kg)
MDF-C8V
Conventional
model*
Rated power consumption
340W/345W
550W/600W
*SANYO comparison (115V, 60Hz/230V, 50Hz)
lowest temperature.
MDF-C8V
-60°C to -80°C (1°C increments)
-80°C (Ambient temp. 30°C)
21.6” x 27.0” x 37.2” (550 x 685 x 945 mm)
15.9” x 19.3” x 16.9” (405 x 490 x 430 mm)
3.0cu.ft. (84 Liter)
Approx. 67 kg (148lbs.)
2” box: 42pcs. (SCR-072 x 6 racks) 3” Box: 30 pcs.
Outer Lid: 1piece, Inner Lid: 1piece
New VIP® Plus™ Rigid polyurethane foam (HC)
115V / 60 Hz / 1Phase NEMA 5-15P Plug
Rotary type, Output: 400W (1/2 HP)
HFC
Tube on sheet type
• High/Low temp. alarm (5°C to 20°C) • Power failure alarm
• Remote alarm contact: DC30V, 2A
20
0
–20
–40
–60
–80
–100
0 6 75321 84
Temperature (˚C)
Time (hour)
5 25201510 30 35
12
10
15
0
Time (hour)
Ambient temperature (˚C)
Ambient temp. and maintenance
of –70˚C by injection of LCO
2
(30kg)
MDF-C8V
Conventional
model*
Rated power consumption
340W/345W
550W/600W
*SANYO comparison (115V, 60Hz/230V, 50Hz)
HFC
5 25201510 30 35
12
10
15
0
Time (hour)
Ambient temperature (˚C)
Ambient temp. and maintenance
of –70˚C by injection of LCO
2
(30kg)
Rated power consumption
340W/345W
550W/600W
Preservation
www.sanyobiomedical.com
Options:
• LCO2 Back-up System
• Temperature Recorder
MTR-C954
SANYO Electric Co.,Ltd., Biomedical Division, Gumma is certified for Quality management system:ISO9001/
Medical devices Quality management system:ISO13485/Environmental management system:ISO14001
Dimensions Performance Data Charts
Product conforms to RoHS (European Restriction of Hazardous Substance directives)
SANYO is committed to developing green technologies
that provide energy efficiency resulting in lower
operational costs with less impact on the environment.
• Back-up system mounting kit
MDF-UBK
• Inventory Rack
SCR-072-I
SCR-053-I
Biomedical and Environmental Solutions Division
1300 Michael Drive, Suite A, Wood Dale, IL 60191 USA
201 Creditview Road, Woodbridge, Ontario L4L 9T1
SANYO North America Corporation
Toll Free USA 800-858-8442 • Fax 630-238-0074
www.sanyobiomedical.com
SANYO Canada, Inc.
905-265-4100 • Fax 905-265-4101
LR-MDFC8V1-11.09
Loading...