Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
Monolithic Linear IC
5 to 24V 0.5A 3-Pin Voltage Regulators
Ordering number:ENN2609B
L78M00T Series
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, T aito-ku, TOKYO, 110-8534 JAPAN
Features
• Output voltage
L78M05T : 5V L78M06T : 6V L78M07T : 7V
L78M08T : 8V L78M09T : 9V L78M10T : 10V
L78M12T : 12V L78M15T : 15V L78M18T : 18V
L78M20T : 20V L78M24T : 24V
• 500mA output.
• On-chip thermal protector.
• On-chip overcurrent limiter.
• On-chip ASO protector.
• Small-sized power package TP-3H permitting the equip-
ment to be made compact.
• The allowable power dissipation can be increased by be-
ing surface-mounted on the board.
• Capable of being mounted in a variety of methods be-
cause of various lead forming versions available.
Equivalent Circuit
Package Dimensions
unit:mm
3110
[L78M00T Series]
6.5
5.0
5.5 1.5
0.6
0.5
7.5
2.62.6
123
2.3
0.5
7.0
1.2
0.5
1 : INPUT
2 : COMMON
3 : OUTPUT
SANYO : TP-3H
D1599TH (KT)/D0694HK/9237KI/9107TA, TS No.2609–1/8
L78M00T Series
Specifications
[Common to L78M00T series]
Maximum Ratings at Ta = 25˚C
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatloVylppuSmumixaMV
noitapissiDrewoPelbawollAxamdPnifoN 0.1W
erutarepmeTgnitarepOrpoT 08+ot02–
erutarepmeTegarotSgtsT 051+ot04–
[L78M05T]
Recommended Operating Conditions at Ta = 25˚C
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatloVtupnIV
tnerruCtuptuOI
xam1niP 53V
CC
NI
TUO
˚C
˚C
02ot5.7V
005ot5Am
Operating Characteristics at Ta = 25˚C, VIN=10V, I
retemaraPlobmySsnoitidnoC
egatloVtuptuOV
noitalugeReniL
noitalugeRdaoL
egatloVtuptuOV
noitapissiDtnerruCI
)eniL(noitairaVnoitapissiDtnerruC
)daoL(noitairaVnoitapissiDtnerruC
egatloVesioNtuptuOV
noitcejeRelppiRjerR
porDegatloVtuptuO-tupnImuminiMV
tnerruCtrohSI
tnerruCtuptuOkaePI
∆V
∆V
∆I
∆I
Tj=25°C
TUO
Tj=25°C, 7V≤VIN≤25V, I
ENILo
Tj=25°C, 8V≤VIN≤20V, I
Tj=25°C, 5mA≤I
DAOLo
Tj=25°C, 5mA≤I
V7 ≤VNI≤ Am5,V02 ≤I
TUO
Tj=25°C
CC
V8 ≤VNI≤ I,V52
ENILCC
Am5 ≤I
DAOLCC
ON
SO
PO
zH01 ≤f≤ zHk00104Vµ
f=120Hz, 8V≤VIN≤19V, Tj=25°C, I
f=120Hz, 8V≤VIN≤19V, Tj=25°C, I
I
PORD
TUO
Tj=25°C, VIN=35V, to GND
Tj=25°C
[L78M06T]
Recommended Operating Conditions at Ta = 25˚C
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatloVtupnIV
tnerruCtuptuOI
NI
TUO
=350mA, See specified Test Circuit.
OUT
sgnitaR
nimpytxam
8.40.52.5V
=200mA
OUT
=200mA
OUT
≤500mA
OUT
≤200mA
OUT
≤ Am0535.0Am
TUO
Am053=0.2V
≤ Am05357.452.5V
TUO
Am002=8.0Am
TUO
=100mA
OUT
=300mA
OUT
0.305Vm
0.152Vm
5.40.6Am
26Bd
2608Bd
003Am
7.0A
tinU
001Vm
05Vm
12ot5.8V
005ot5Am
Operating Characteristics at Ta = 25˚C, VIN=11V, I
retemaraPlobmySsnoitidnoC
egatloVtuptuOV
noitalugeReniL
noitalugeRdaoL
egatloVtuptuOV
noitapissiDtnerruCI
)eniL(noitairaVnoitapissiDtnerruC
)daoL(noitairaVnoitapissiDtnerruC
egatloVesioNtuptuOV
noitcejeRelppiRjerR
porDegatloVtuptuO-tupnImuminiMV
tnerruCtrohSI
tnerruCtuptuOkaePI
∆V
∆V
∆I
∆I
Tj=25°C
TUO
Tj=25°C, 8V≤VIN≤25V, I
ENILo
Tj=25°C, 9V≤VIN≤20V, I
Tj=25°C, 5mA≤I
DAOLo
Tj=25°C, 5mA≤I
V8 ≤VNI≤ Am5,V12 ≤I
TUO
Tj=25°C
CC
V9 ≤VNI≤ I,V52
ENILCC
Am5 ≤I
DAOLCC
ON
SO
PO
zH01 ≤f≤ zHk00154Vµ
f=120Hz, 9V≤VIN≤20V, Tj=25°C, I
f=120Hz, 9V≤VIN≤20V, Tj=25°C, I
I
PORD
TUO
Tj=25°C, VIN=35V, to GND
Tj=25°C
=350mA, See specified Test Circuit.
OUT
sgnitaR
nimpytxam
57.50.652.6V
=200mA
OUT
=200mA
OUT
≤500mA
OUT
≤200mA
OUT
≤ Am0537.53.6V
TUO
Am002=8.0Am
TUO
≤ Am0535.0Am
TUO
=100mA
OUT
=300mA
OUT
Am053=0.2V
0.506Vm
5.103Vm
5.40.6Am
95Bd
9508Bd
003Am
7.0A
tinU
021Vm
06Vm
No.2609–2/8
L78M00T Series
[L78M07T]
Recommended Operating Conditions at Ta = 25˚C
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatloVtupnIV
tnerruCtuptuOI
NI
TUO
22ot5.9V
005ot5Am
Operating Characteristics at Ta = 25˚C, VIN=12V, I
retemaraPlobmySsnoitidnoC
egatloVtuptuOV
noitalugeReniL
noitalugeRdaoL
egatloVtuptuOV
noitapissiDtnerruCI
)eniL(noitairaVnoitapissiDtnerruC
)daoL(noitairaVnoitapissiDtnerruC
egatloVesioNtuptuOV
noitcejeRelppiRjerR
porDegatloVtuptuO-tupnImuminiMV
tnerruCtrohSI
tnerruCtuptuOkaePI
∆V
∆V
∆I
∆I
Tj=25°C
TUO
Tj=25°C, 9V≤VIN≤25V, I
ENILo
Tj=25°C, 10V≤VIN≤20V, I
Tj=25°C, 5mA≤I
DAOLo
Tj=25°C, 5mA≤I
V9 ≤VNI≤ Am5,V22 ≤I
TUO
Tj=25°C
CC
SO
PO
V01 ≤VNI≤ I,V52
ENILCC
Am5 ≤I
DAOLCC
ON
zH01 ≤f≤ zHk00184Vµ
f=120Hz, 10V≤VIN≤21V , Tj=25°C, I
f=120Hz, 10V≤VIN≤21V , Tj=25°C, I
I
PORD
TUO
Tj=25°C, VIN=35V, to GND
Tj=25°C
[L78M08T]
Recommended Operating Conditions at Ta = 25˚C
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatloVtupnIV
tnerruCtuptuOI
NI
TUO
=350mA, See specified Test Circuit.
OUT
sgnitaR
nimpytxam
27.60.782.7V
=200mA
OUT
=200mA
OUT
≤500mA
OUT
≤200mA
OUT
≤ Am0536.64.7V
TUO
Am002=8.0Am
TUO
≤ Am0535.0Am
TUO
=100mA
OUT
=300mA
OUT
Am053=0.2V
0.606Vm
0.203Vm
6.40.6Am
85Bd
8508Bd
003Am
7.0A
tinU
041Vm
07Vm
32ot5.01V
005ot5Am
Operating Characteristics at Ta = 25˚C, VIN=15V, I
retemaraPlobmySsnoitidnoC
egatloVtuptuOV
noitalugeReniL
noitalugeRdaoL
egatloVtuptuOV
noitapissiDtnerruCI
)eniL(noitairaVnoitapissiDtnerruC
)daoL(noitairaVnoitapissiDtnerruC
egatloVesioNtuptuOV
noitcejeRelppiRjerR
porDegatloVtuptuO-tupnImuminiMV
tnerruCtrohSI
tnerruCtuptuOkaePI
∆V
∆V
∆I
∆I
Tj=25°C
TUO
Tj=25°C, 10.5V≤VIN≤25V, I
ENILo
Tj=25°C, 11V≤VIN≤20V, I
Tj=25°C, 5mA≤I
DAOLo
Tj=25°C, 5mA≤I
TUO
CC
ON
SO
PO
V5.01 ≤VNI≤ Am5,V32 ≤I
Tj=25°C
V11 ≤VNI≤ I,V52
ENILCC
Am5 ≤I
DAOLCC
zH01 ≤f≤ zHk00105Vµ
f=120Hz, 11.5V≤VIN≤22V , Tj=25°C, I
f=120Hz, 11.5V≤VIN≤22V , Tj=25°C, I
I
PORD
TUO
Tj=25°C, VIN=35V, to GND
Tj=25°C
=350mA, See specified Test Circuit.
OUT
sgnitaR
nimpytxam
7.70.83.8V
=200mA
OUT
=200mA
OUT
≤500mA
OUT
≤200mA
OUT
≤ Am0536.74.8V
TUO
Am002=8.0Am
TUO
≤ Am0535.0Am
TUO
=100mA
OUT
=300mA
OUT
Am053=0.2V
0.606Vm
0.203Vm
6.40.6Am
65Bd
6508Bd
003Am
7.0A
tinU
061Vm
08Vm
No.2609–3/8
L78M00T Series
[L78M09T]
Recommended Operating Conditions at Ta = 25˚C
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatloVtupnIV
tnerruCtuptuOI
NI
TUO
52ot21V
005ot5Am
Operating Characteristics at Ta = 25˚C, VIN=16V, I
retemaraPlobmySsnoitidnoC
egatloVtuptuOV
noitalugeReniL
noitalugeRdaoL
egatloVtuptuOV
noitapissiDtnerruCI
)eniL(noitairaVnoitapissiDtnerruC
)daoL(noitairaVnoitapissiDtnerruC
egatloVesioNtuptuOV
noitcejeRelppiRjerR
porDegatloVtuptuO-tupnImuminiMV
tnerruCtrohSI
tnerruCtuptuOkaePI
∆V
∆V
∆I
∆I
Tj=25°C
TUO
Tj=25°C, 11.5V≤VIN≤25V, I
ENILo
Tj=25°C, 12V≤VIN≤20V, I
Tj=25°C, 5mA≤I
DAOLo
Tj=25°C, 5mA≤I
TUO
CC
ON
SO
PO
V5.11 ≤VNI≤ Am5,V42 ≤I
Tj=25°C
V5.21 ≤VNI≤ I,V52
ENILCC
Am5 ≤I
DAOLCC
zH01 ≤f≤ zHk00106Vµ
f=120Hz, 12V≤VIN≤23V , Tj=25°C, I
f=120Hz, 12V≤VIN≤23V , Tj=25°C, I
I
PORD
TUO
Tj=25°C, VIN=35V, to GND
Tj=25°C
[L78M10T]
Recommended Operating Conditions at Ta = 25˚C
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatloVtupnIV
tnerruCtuptuOI
NI
TUO
=350mA, See specified Test Circuit.
OUT
sgnitaR
nimpytxam
6.80.94.9V
=200mA
OUT
=200mA
OUT
≤500mA
OUT
≤200mA
OUT
≤ Am0535.0Am
TUO
Am053=0.2V
≤ Am0535.85.9V
TUO
Am002=8.0Am
TUO
=100mA
OUT
=300mA
OUT
0.6001Vm
0.205Vm
6.40.6Am
65Bd
6508Bd
003Am
7.0A
tinU
081Vm
09Vm
52ot31V
005ot5Am
Operating Characteristics at Ta = 25˚C, VIN=17V, I
retemaraPlobmySsnoitidnoC
egatloVtuptuOV
noitalugeReniL
noitalugeRdaoL
egatloVtuptuOV
noitapissiDtnerruCI
)eniL(noitairaVnoitapissiDtnerruC
)daoL(noitairaVnoitapissiDtnerruC
egatloVesioNtuptuOV
noitcejeRelppiRjerR
porDegatloVtuptuO-tupnImuminiMV
tnerruCtrohSI
tnerruCtuptuOkaePI
∆V
∆V
∆I
∆I
Tj=25°C
TUO
Tj=25°C, 12.5V≤VIN≤25V, I
ENILo
Tj=25°C, 13V≤VIN≤22V, I
Tj=25°C, 5mA≤I
DAOLo
Tj=25°C, 5mA≤I
TUO
CC
ON
SO
PO
V5.21 ≤VNI≤ Am5,V52 ≤I
Tj=25°C
V5.31 ≤VNI≤ I,V52
ENILCC
Am5 ≤I
DAOLCC
zH01 ≤f≤ zHk00156Vµ
f=120Hz, 13V≤VIN≤25V , Tj=25°C, I
f=120Hz, 13V≤VIN≤25V , Tj=25°C, I
I
PORD
TUO
Tj=25°C, VIN=35V, to GND
Tj=25°C
=350mA, See specified Test Circuit.
OUT
sgnitaR
nimpytxam
6.90.014.01V
=200mA
OUT
=200mA
OUT
≤500mA
OUT
≤200mA
OUT
≤ Am0535.0Am
TUO
Am053=0.2V
≤ Am0535.95.01V
TUO
Am002=8.0Am
TUO
=100mA
OUT
=300mA
OUT
0.7001Vm
0.205Vm
6.40.6Am
55Bd
5508Bd
003Am
7.0A
tinU
002Vm
001Vm
No.2609–4/8
L78M00T Series
[L78M12T]
Recommended Operating Conditions at Ta = 25˚C
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatloVtupnIV
tnerruCtuptuOI
NI
TUO
52ot51V
005ot5Am
Operating Characteristics at Ta = 25˚C, VIN=19V, I
retemaraPlobmySsnoitidnoC
egatloVtuptuOV
noitalugeReniL
noitalugeRdaoL
egatloVtuptuOV
noitapissiDtnerruCI
)eniL(noitairaVnoitapissiDtnerruC
)daoL(noitairaVnoitapissiDtnerruC
egatloVesioNtuptuOV
noitcejeRelppiRjerR
porDegatloVtuptuO-tupnImuminiMV
tnerruCtrohSI
tnerruCtuptuOkaePI
∆V
∆V
∆I
∆I
Tj=25°C
TUO
Tj=25°C, 14.5V≤VIN≤30V, I
ENILo
Tj=25°C, 16V≤VIN≤25V, I
Tj=25°C, 5mA≤I
DAOLo
Tj=25°C, 5mA≤I
TUO
CC
ON
SO
PO
V5.41 ≤VNI≤ Am5,V72 ≤I
Tj=25°C
V51 ≤VNI≤ I,V03
ENILCC
Am5 ≤I
DAOLCC
zH01 ≤f≤ zHk00157Vµ
f=120Hz, 15V≤VIN≤25V , Tj=25°C, I
f=120Hz, 15V≤VIN≤25V , Tj=25°C, I
I
PORD
TUO
Tj=25°C, VIN=35V, to GND
Tj=25°C
[L78M15T]
Recommended Operating Conditions at Ta = 25˚C
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatloVtupnIV
tnerruCtuptuOI
NI
TUO
=350mA, See specified Test Circuit.
OUT
sgnitaR
nimpytxam
5.110.215.21V
=200mA
OUT
=200mA
OUT
≤500mA
OUT
≤200mA
OUT
≤ Am0535.0Am
TUO
Am053=0.2V
≤ Am0534.116.21V
TUO
Am002=8.0Am
TUO
=100mA
OUT
=300mA
OUT
0.8001Vm
0.205Vm
8.40.6Am
55Bd
5508Bd
003Am
7.0A
tinU
042Vm
021Vm
03ot81V
005ot5Am
Operating Characteristics at Ta = 25˚C, VIN=23V, I
retemaraPlobmySsnoitidnoC
egatloVtuptuOV
noitalugeReniL
noitalugeRdaoL
egatloVtuptuOV
noitapissiDtnerruCI
)eniL(noitairaVnoitapissiDtnerruC
)daoL(noitairaVnoitapissiDtnerruC
egatloVesioNtuptuOV
noitcejeRelppiRjerR
porDegatloVtuptuO-tupnImuminiMV
tnerruCtrohSI
tnerruCtuptuOkaePI
∆V
∆V
∆I
∆I
Tj=25°C
TUO
Tj=25°C, 17.5V≤VIN≤30V, I
ENILo
Tj=25°C, 19V≤VIN≤30V, I
Tj=25°C, 5mA≤I
DAOLo
Tj=25°C, 5mA≤I
TUO
CC
ON
SO
PO
V5.71 ≤VNI≤ Am5,V03 ≤I
Tj=25°C
V5.71 ≤VNI≤ I,V03
ENILCC
Am5 ≤I
DAOLCC
zH01 ≤f≤ zHk00109Vµ
f=120Hz, 18.5V≤VIN≤28.5V, Tj=25°C, I
f=120Hz, 18.5V≤VIN≤28.5V, Tj=25°C, I
I
PORD
TUO
Tj=25°C, VIN=35V, to GND
Tj=25°C
=350mA, See specified Test Circuit.
OUT
sgnitaR
nimpytxam
4.410.516.51V
=200mA
OUT
=200mA
OUT
≤500mA
OUT
≤200mA
OUT
≤ Am05352.4157.51V
TUO
Am002=8.0Am
≤ Am0535.0Am
TUO
TUO
=100mA
OUT
=300mA
OUT
Am053=0.2V
0.01001Vm
0.305Vm
8.40.6Am
45Bd
4507Bd
003Am
7.0A
tinU
003Vm
051Vm
No.2609–5/8
L78M00T Series
[L78M18T]
Recommended Operating Conditions at Ta = 25˚C
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatloVtupnIV
tnerruCtuptuOI
NI
TUO
33ot12V
005ot5Am
Operating Characteristics at Ta = 25˚C, VIN=27V, I
retemaraPlobmySsnoitidnoC
egatloVtuptuOV
noitalugeReniL
noitalugeRdaoL
egatloVtuptuOV
noitapissiDtnerruCI
)eniL(noitairaVnoitapissiDtnerruC
)daoL(noitairaVnoitapissiDtnerruC
egatloVesioNtuptuOV
noitcejeRelppiRjerR
porDegatloVtuptuO-tupnImuminiMV
tnerruCtrohSI
tnerruCtuptuOkaePI
∆V
∆V
∆I
∆I
Tj=25°C
TUO
Tj=25°C, 21V≤VIN≤35V, I
ENILo
Tj=25°C, 22V≤VIN≤35V, I
Tj=25°C, 5mA≤I
DAOLo
Tj=25°C, 5mA≤I
V12 ≤VNI≤ Am5,V33 ≤I
TUO
Tj=25°C
CC
SO
PO
V12 ≤VNI≤ I,V33
ENILCC
Am5 ≤I
DAOLCC
ON
zH01 ≤f≤ zHk001001Vµ
f=120Hz, 22V≤VIN≤33V , Tj=25°C, I
f=120Hz, 22V≤VIN≤33V , Tj=25°C, I
I
PORD
TUO
Tj=25°C, VIN=35V, to GND
Tj=25°C
[L78M20T]
Recommended Operating Conditions at Ta = 25˚C
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatloVtupnIV
tnerruCtuptuOI
NI
TUO
=350mA, See specified Test Circuit.
OUT
sgnitaR
nimpytxam
3.710.817.81V
=200mA
OUT
=200mA
OUT
≤500mA
OUT
≤200mA
OUT
TUO
≤ Am0535.0Am
TUO
Am053=0.2V
Am053=1.719.81V
TUO
Am002=8.0Am
=100mA
OUT
=300mA
OUT
0.01001Vm
0.505Vm
9.40.6Am
35Bd
3507Bd
003Am
7.0A
tinU
063Vm
081Vm
53ot32V
005ot5Am
Operating Characteristics at Ta = 25˚C, VIN=29V, I
retemaraPlobmySsnoitidnoC
egatloVtuptuOV
noitalugeReniL
noitalugeRdaoL
egatloVtuptuOV
noitapissiDtnerruCI
)eniL(noitairaVnoitapissiDtnerruC
)daoL(noitairaVnoitapissiDtnerruC
egatloVesioNtuptuOV
noitcejeRelppiRjerR
porDegatloVtuptuO-tupnImuminiMV
tnerruCtrohSI
tnerruCtuptuOkaePI
∆V
∆V
∆I
∆I
Tj=25°C
TUO
Tj=25°C, 23V≤VIN≤35V, I
ENILo
Tj=25°C, 24V≤VIN≤35V, I
Tj=25°C, 5mA≤I
DAOLo
Tj=25°C, 5mA≤I
V32 ≤VNI≤ Am5,V53 ≤I
TUO
Tj=25°C
CC
SO
PO
V32 ≤VNI≤ I,V53
ENILCC
Am5 ≤I
DAOLCC
ON
zH01 ≤f≤ zHk001011Vµ
f=120Hz, 24V≤VIN≤34V , Tj=25°C, I
f=120Hz, 24V≤VIN≤34V , Tj=25°C, I
I
PORD
TUO
Tj=25°C, VIN=35V, to GND
Tj=25°C
=350mA, See specified Test Circuit.
OUT
sgnitaR
nimpytxam
2.910.028.02V
=200mA
OUT
=200mA
OUT
≤500mA
OUT
≤200mA
OUT
Am053=0.910.12V
TUO
Am002=8.0Am
TUO
≤ Am0535.0Am
TUO
=100mA
OUT
=300mA
OUT
Am053=0.2V
0.01001Vm
0.505Vm
9.40.6Am
35Bd
3507Bd
003Am
7.0A
tinU
004Vm
002Vm
No.2609–6/8
L78M00T Series
[L78M24T]
Recommended Operating Conditions at Ta = 25˚C
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatloVtupnIV
tnerruCtuptuOI
NI
TUO
53ot72V
005ot5Am
Operating Characteristics at Ta = 25˚C, VIN=33V, I
retemaraPlobmySsnoitidnoC
egatloVtuptuOV
noitalugeReniL
noitalugeRdaoL
egatloVtuptuOV
noitapissiDtnerruCI
)eniL(noitairaVnoitapissiDtnerruC
)daoL(noitairaVnoitapissiDtnerruC
egatloVesioNtuptuOV
noitcejeRelppiRjerR
porDegatloVtuptuO-tupnImuminiMV
tnerruCtrohSI
tnerruCtuptuOkaePI
∆V
∆V
∆I
∆I
Tj=25°C
TUO
Tj=25°C, 27V≤VIN≤35V, I
ENILo
Tj=25°C, 28V≤VIN≤35V, I
Tj=25°C, 5mA≤I
DAOLo
Tj=25°C, 5mA≤I
V72 ≤VNI≤ Am5,V53 ≤I
TUO
Tj=25°C
CC
SO
PO
V72 ≤VNI≤ I,V53
ENILCC
Am5 ≤I
DAOLCC
ON
zH01 ≤f≤ zHk001071Vµ
f=120Hz, 28V≤VIN≤35V , Tj=25°C, I
f=120Hz, 28V≤VIN≤35V , Tj=25°C, I
I
PORD
TUO
Tj=25°C, VIN=35V, to GND
Tj=25°C
Specified Test Circuit (Common to L78M00T series)
=350mA, See specified Test Circuit.
OUT
sgnitaR
nimpytxam
0.320.420.52V
=200mA
OUT
=200mA
OUT
≤500mA
OUT
≤200mA
OUT
TUO
≤ Am0535.0Am
TUO
Am053=0.2V
Am053=8.22.2.52V
TUO
Am002=8.0Am
=100mA
OUT
=300mA
OUT
0.01001Vm
0.505Vm
0.50.6Am
05Bd
0507Bd
003Am
7.0A
tinU
084Vm
042Vm
The allowable power dissipation (Pd max) is 1.0W (Ta=25°C) with no fin attached. When the L78M00T series are
surface-mounted on a hybrid IC board or printed circuit board, a high allowable power dissipation can be obtained,
though they are placed in a small-sized package.
Shown below is the relationship between the Cu-foiled area and the allowable power dissipation when the L78M00T
series are surface-mounted on a glass epoxy board (50×50×0.8mm3).
No.2609–7/8
Lead Formings
L78M00T Series
FA forming LR forming
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of December, 1999. Specifications and information herein are subject
to change without notice.
PS No.2609–8/8
Loading...