Sanyo DWC010 Specifications

Ordering number:EN2832B

DWC010

Silicon Epitaxial Planar Type

Ultrahigh-Speed Switching Diode

Features

· Ideally suited for use in hybrid ICs because of very small-sized package.

· High breakdown voltage : V=200V.

R

· Small interterminal capacitance.

Specifications

Absolute Maximum Ratings at Ta = 25˚C

Package Dimensions

unit:mm

1164A

[DWC010]

1:Anode

2:Anode

3:Cathode

4:Cathode

SANYO:CP4

(Bottom view)

Parameter	Symbol	Conditions	Ratings	Unit
Peak Reverse Voltage	VRM		250	V
Reverse Voltage	VR		200	V
Peak Forward Current	IFM	Unit Rating	300	mA
		Total Rating	450	mA
Average Rectified Current	IO	Unit Rating	100	mA
		Total Rating	150	mA
Surge Forward Current	IFSM	1µs, unit rating	4	A
		1µs, total rating	6	A
Allowable Power Dissipation	P		200	mW
Junction Temperature	Tj		125	˚C
Storage Temperature	Tstg		–55 to +125	˚C

Electrical Characteristics at Ta = 25˚C

Parameter	Symbol	Conditions		Ratings		Unit
			min	typ	max
Forward Voltage	VF1	IF=10mA		0.72		V
	VF2	IF=100mA			1.2	V
Reverse Current	IR1	VR=50V			0.1	µA
	IR2	VR=200V			1.0	µA
Interterminal Capacitance	C	VR=0V, f=1MHz			3.0	pF
Reverse Recovery Time	trr	IF=10mA, VR=6V, RL=50Ω, Irr=0.1Irp			60	ns
Marking : AW
Reverse Recovery Time Test Circuit		Electrical Connection

(Top view)

SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters

TOKYO OFFICE, Tokyo Bldg., 1-10 , Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

62098HA (KT)/92995GI (KOTO)/D268TA, TS No.2832-1/2

DWC010

No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss.

Anyone purchasing any products described or contained herein for an above-mentioned use shall:

Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use:

Not impose any responsibilty for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally.

Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.

This catalog provides information as of June, 1998. Specifications and information herein are subject to

change without notice.

PS No.2832-2/2