System solely supports DVD-Video and Video CDs along with CDs.
Can use both PAL and NTSC standards for Playback.
Wavelength of 650 nm from a Semi-Conductor Laser.
Maximum outputs include 1mW for DVD and 0.5 mW for a CD.
Ranging from 4Hz - 44kHz, with a DVD maximum sample rate of 96kHz.
Signal to Noise Ratio: Exceeds 105 dB.
Digital Audio Harmonic Distortion is around 0.003 %.
Wow and Flutter: Low and sub measurable.
Outputs include Connectors and cables :
A FIBER OPTIC CABLE IN DIGITAL OUT:
S-VIDEO OUT: NTSC, PAL 75 Ω
VIDEO OUT: 75 Ω
AUDITS: 1.9 V rms
Supports 50hz at a voltage of 230 V.
In Idle mode the Consumption is less than 2W with a maximum Consumption of 16W.
Weight is 2.4kg with Dimension of 270(W) x 282(D) x87(H) mm.
Frequently Asked Questions
Q: Can a Dvd Player Play a Video Cds?
A: Yes, a Dvd Player can play Video CDs alongside DVD Audio, DVD Type Memorex, and CD players.
Q: How much power does the device use?
A: A maximum of 16 W is consumed while only 2 W are needed in standby mode.
Q: Is it possible to link the hardware with a VCR?
A: Linking this particular DVD player to a VCR has some recommendations against it due to the image quality possibly being altered by a copyright security feature.
Q: How do I change from PAL to NTSC?
A: There is a TV system select switch at the back panel which can be used to switch systems.
Q: If I receive a NO Disc error what can I do?
A: Check whether the disc is correctly placed in the tray with the label facing upwards. If the issue persists check for scratches or dirt on the tray.
Q: How can I change the volume of my headphone?
A: The PHONE LEVEL control placed on the front panel can be used to easily increase or decrease the volume of the headphone.
Q: Are there any parental limitations to using this device?
A: The DVD player does contain a parental lock function that can enable the use of restrictions on the device according to the MPAA rating system.
Q: What can I do in the event that my remote control seems faulty and is not functioning correctly?
A: If your remote control is not responding, first verify the pole of the battery and change out in case they are weak or dead. It is also crucial to observe whether the remote control is pointed at the window of the remote sensor or not.
User Manual
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.
Loading...