Sanyo DP47460 User Manual

Model No. / No. de Modelo

DP47460

1JC6P1P0377A-1JC6P1P0377A-

Part No. / No. de parte:

Table of Contents

Owner’s Manual

Tabla de contenido

Manual del usuario

47”

1080p HDTV LCD 120Hz

TV HD 1080p de LCD 120Hz

Need help? www.sanyoctv.com 1-877-864-9604

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit fully into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges. In the U.S. Selection 810-21 of the National Electrical Code provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrodes.

16. An outside antenna system should not be located in the vicinity of overhead power lines or other electrical light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

EXAMPLE OF ANTENNA GROUNDING ACCORDING TO NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

“Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.”

17. Wall or Ceiling Mounting—The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

18. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

19. When the MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN!

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS UNIT.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT SAFETY INSTRUCTIONS

Need help? www.sanyoctv.com 1-877-864-9604

FCC INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.

CAUTION: FCC Regulations state that improper modifications or unauthorized changes to this unit may void

the user’s authority to operate the unit.

TRADEMARKS

PC RESOLUTION CHART

As an Energy Star®Partner, Sanyo Manufacturing Corporation has determined that this product meets the Energy Star

guidelines for energy

efficiency.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

HDMI, the HDMI Logo and HighDefinition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Adobe®, Adobe Flash®, and Flash Lite

are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.

ENERGY STAR

Need help? www.sanyoctv.com 1-877-864-9604

CONTENTS

IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . 2

FCC INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

TRADEMARKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

PC RESOLUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

PROTECTING THE SCREEN . . . . . . . . . . . . . . . . . . . . . . . . .4

POSITIONING THE HDTV . . . . . . . . . . . . . . . . . . . . . . . . . . .5

STAND REMOVAL/ASSEMBLY . . . . . . . . . . . . . . . . . . . . . .5

WALL MOUNTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

GETTING STARTED—

Remote Control Battery Installation . . . . . . . . . . . . . . . .5

Antenna Connections for off-air or cable . . . . . . . . . . .5

HDTV INPUT/OUTPUT REFERENCE . . . . . . . . . . . . . . . . . . .6

A/V CONNECTIONS (SIDE PANEL) . . . . . . . . . . . . . . . . . . .7

A/V CONNECTIONS (BACK PANEL) . . . . . . . . . . . . . . . . . .8

POWER CONNECTION / INITIAL CHANNEL SEARCH . . .9

REMOTE CONTROL OPERATION . . . . . . . . . . . . . . . . . . . .10

ON-SCREEN MENU OPERATION—

Channel / Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Channel Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Channel Scan Memory . . . . . . . . . . . . . . . . . . . . . . .11

Input Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Video3 Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

HDMI Linking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Digital Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Energy Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Clock Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Motion Sync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

V-Chip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Pix-Shape Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

PC CONNECTIONS & MENU OPERATION . . . . . . . . . . . .19

PHOTO VIEWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

GNU GENERAL PUBLIC LICENSE . . . . . . . . . . . . . . . . . . .22

PROTECTING THE SCREEN

CAUTION: The screen can be damaged if it is not

maintained properly.

•

Do not use hard objects such as hard cloth or paper to clean the screen.

•

Do not use excessive pressure when cleaning the screen; excessive pressure can cause permanent discoloration or dark spots.

•

NEVER spray liquids on the screen.

HANDLING PRECAUTIONS

•

Handle by the cabinet only.

•

Never touch the screen when handling.

•

Handling damage is not covered under warranty.

SPECIFICATIONS

Power Requirement: Source: AC 120V, 60Hz

AC Power Consumption: Weight:

221 watts 45 lbs.(w/stand)

Dimensions:

MODEL WIDTH HEIGHT DEPTH

DP47460 44.6 29.4 12.7

w/o stand 27.2 4.6

NOTE: Dimensions are in inches

Please read before operating your HDTV!

“The American Academy of Pediatrics discourages television viewing for children younger than two years of age”

CONTAINS MERCURY LAMPS, DISPOSE OF PROPERLY

Need help? www.sanyoctv.com 1-877-864-9604

GETTING STARTED

Install two (2) “AAA” batteries in the remote control. (Not included)

To ensure safe operation, please observe the following precautions:

• Replace both batteries at the same time. Do not use a new battery with a used battery.

• There’s a risk of explosion if a battery is replaced by an incorrect type.

• Do not expose the Remote Control unit to moisture or heat.

• Be sure to match the “+” and “

–” signs on the

batteries with marks inside the remote control.

ANTENNA CONNECTION FOR OFF-AIR SIGNALS OR CABLE

ANTENNA

CABLE

ANALOG / DIGITAL

ANTENNA IN

BATTERY INSTALLATION

Hook up your antenna or your cable service to the HDTV’s ANT terminal with the use of a 75 OHM coaxial cable.

NOTE: Keep your indoor antenna at least 3 ft. away

from the television set and any other electronic equipment.

The tuner in this HDTV can receive:

• Digital and Analog off air signals from an antenna

• Analog or ClearQAM cable channels from a direct

Cable TV connection.

Place HDTV face down on a padded or cushioned flat surface to protect the screen and finish

Remove the four (4) screws securing the foot stand. CAUTION: Hold the stand firmly as you remove the last screw.

STAND REMOVAL ____________

POSITIONING THE HDTV

•

Always use a firm and flat surface when positioning your HDTV.

•

Do not position the unit in a confined area.

•

Allow adequate space for proper ventilation.

•

Do not position the HDTV where it is easily reachable by small children and may present risk of injury.

Place HDTV face down on a padded or cushioned flat surface to protect the screen and finish

Carefully insert the stand base to the bottom of the HDTV and secure the base by inserting 4 screws as indicated in the above diagram.

NOTE: If your HDTV came packed with the Stand Base

unassembled, these screws will be found in the literature package.

STAND ASSEMBLY ___________

Wall mounting of the HDTV must be performed by a skilled person.

Use the screws you would use to attach the stand base to secure the HDTV to a wall mounting kit (not included.)

VESA standard interface: 400 x 400

Mounting screws measurements:

M6 (6mm) Diameter, Length—12mm (maximum)

WALL MOUNTING ____________

Need help? www.sanyoctv.com 1-877-864-9604

S-Video Input (VIDEO1)

NOTE: An S-Video connection will override a connection to

the Video1 (yellow) input jack.

Composite AV Input (VIDEO1) – Yellow (Video), plus white and red (Audio) input jacks.

Component AV Input (VIDEO2) – Green (Y), blue (Pb), and red (Pr) Video inputs plus the white and red Audio inputs.

Stereo Audio Out (L/R) Jacks

HDMI (INPUT2 & 3) – An all digital AV interface

accepting uncompressed video signals up to 1080p for the best picture possible.

Analog / Digital Antenna Input – Connect a 75 OHM cable from an antenna or direct Cable service.

Digital Audio Output (Coaxial)

Component AV Input (VIDEO3) – Green (Y), blue

(Pb), and red (Pr) Video inputs plus the white and red Audio inputs.

NOTE: A Composite connection is possible via VIDEO

INPUT3 using the Y (VIDEO) jack and the L/R audio jacks. (See Video 3 Setting on page 12.)

PC Input and Stereo Audio (Mini)

• MONITOR RGB (D-SUB)

• AUDIO R/L (Stereo Mini Jack)

NOTE: See page 19 for proper PC hookup and setup.

GETTING STARTED

HDTV INPUT/OUTPUT REFERENCE

AUDIO (DVI)

USB Input

View pictures stored in a USB flash drive or connect to the internet with the WiFi dongle. *

HDMI (INPUT1) – An all digital AV interface accepting uncompressed video signals up to 1080p for the very best picture possible.

NOTE: A DVI connection is possible via the HDMI

INPUT1 (DVI) using an appropriate adapter and the VIDEO3 Audio jacks for sound output.

ETHERNET Port

Hook up your HDTV to the internet with the use of an appropriate ethernet cable and a correct internet setup. *

* NOTE: Please refer to the Internet Ready HDTV Guide

for the proper connection methods.

HDTV BACK PANEL

HDTV

SIDE PANEL

Need help? www.sanyoctv.com 1-877-864-9604

GETTING STARTED

AUDIO / VIDEO CONNECTIONS (SIDE PANEL)

DVD PLAYER

(or similar device)

MULTICHANNEL RECEIVER

(or home theater system)

NOTE: An active internet connection

and wireless modem is needed to connect your HDTV using the USB dongle.

COMPONENT connections will accept SDTV, EDTV and HDTV video signals. Use them for great image quality from digital devices such as a DVD player or Video Game system.

Match your digital device’s Component output jacks to either of the two (2) Component input jack sets (VIDEO2 or VIDEO3) on your HDTV.

USB FLASH DRIVE

USB input jack is used to connect a USB mass storage device (not included) to display digital images on your HDTV, or hookup a WiFi USB dongle (included) to connect your HDTV to the internet through your wireless network.

DVI

HDMI (DVI) INPUT1 can be used to hookup a DVI

device with the use of an appropriate DVI to HDMI cable or adapter. VIDEO3 Audio in L/R jacks need to be hooked up to the DVI device as well

NOTE: HDMI INPUT1 may also be used to hookup any digital

device with an HDMI output, without the use of the L/R audio jacks.

Digital Audio Output is used to output the HDTV’s Audio through your home theater system.

Hook up the HDTV’s Digital Audio Output to your home theater system’s input with the use of a phono-type Digital Audio cable.

DVD PLAYER

(or similar device)

AUDIO (DVI)

Need help? www.sanyoctv.com 1-877-864-9604

GETTING STARTED

AUDIO / VIDEO CONNECTIONS (BACK PANEL)

VCR

(or analog device)

STEREO AMPLIFIER

COMPOSITE connections are used to hookup your analog equipment such as a VCR or an older DVD player.

Hook up you analog device’s yellow video output jack and corresponding audio output jacks to the HDTV’s Video Input 1 composite jacks.

NOTE: Always match the color of your device’s output jack,

the connector and the HDTV’s input jack.

S-Video jack may be used instead of the yellow Composite video input with the use of an S-Video cable connected from your device’s S-Video output to the HDTV’s S-Video input.

SATELLITE RECEIVER

(or similar device)

Audio Output L/R are used to hookup an external stereo Amplifier. Connect your home stereo’s input jacks to the HDTV’s Audio Output jacks with a pair of audio red and white connectors.

NOTE: Do not connect external speakers directly to the

HDTV.

Use HDMI INPUT1, 2 & 3 to hookup HD digital devices such as a Blu-ray player, HD Cable Box, HD Satellite Receiver or Video-game System.

Connect your digital device’s HDMI output to any of the three (3) HDMI inputs on your HDTV with the use of an HDMI cable.

HDMI

+ 18 hidden pages