Sanyo CE21FN1-B Instruction Manual

INSTRUCTION MANUAL CE21FN1-B

Colour Television

Please read this Instruction book before using your television. We wish you many hours of pleasure from your new television.

SAFETY PRECAUTIONS

CAUTION: Please read and retain for your safety. This unit has been engineered and manufactured to assure your personal safety. But improper use can result in potential electric shock or fire hazards. In order not to defeat the safeguards incorporated in this receiver observe the following basic rules for its installation, use and servicing.

Installation

Use

Do not allow anything to rest on the power cord. Do not locate this television receiver where the cord will be damaged by people walking on it.

Do not overload wall outlets and extension cords as this can result in fire or electric shock.

Slots and openings in the cabinet and in the back or bottom are provided for ventilation to ensure reliable operation and to protect it from overheating. These openings must not be blocked or covered. The opening should never be covered with a cloth or other material, and the bottom openings should not be blocked by placing the television receiver on a bed, sofa, rug, or other similar surface. This television receiver should never be placed near or over a radiator or heater.

Do not place your television receiver on an unstable stand, shelf or table. Serious injury to an individual, and damage to the television may result if it should fall. Your sales person can recommend approved stands or shelf and wall mounting instructions.

This television receiver should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided.

		MINIMUM DISTANCES				5cm
10cm				10cm

20cm

If the television is built into a unit, or enclosed, the minimum distances for ventilation must be maintained. Heat build up can reduce the life of your television, and can be dangerous.

Servicing

Your television is fully transistorised and does not contain any user serviceable components.

You must not remove the rear cover of the TV by yourself. The apparatus is working with high voltages and could damage objects or even endanger people. Leave all required repair and service jobs to an authorised service technician. He will exclusively use such spare parts that are complying with the same safety standards as appliciable to the original parts. The use of original spare parts can prevent fire, shock and other hazards.

Unplug the television receiver from the wall outlet and refer servicing to qualified service personnel under the following conditions:

■If the power cord or plug is damaged.

■If liquid has been spilt into the television receiver.

■If television receiver has been exposed to rain or water.

■If the television receiver has been dropped or the cabinet has been damaged.

■If the television receiver exhibits a distinct change in performance.

■If the television receiver does not operate normally by following the operating instructions.

Adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage. This will often require extensive work by a qualified technician to restore the television receiver to normal operation.

This television receiver should be operated only from the type of power source indicated on the television or as indicated in the Operating Instructions. If you are not sure of the type of power supply in your home, consult your sales person or your local power company.

Never add accessories that have not been specifically designed for this television.

Do not drop or push objects into the television cabinet slots or openings. Some internal parts carry hazardous voltages and contact may result in an electric shock hazard. Never spill liquids of any kind on the television receiver. Do not place items such as vases containing liquid on top of the TV set.

Do not expose the television receiver to rain or use near water. For example, near a bathtub, kitchen sink, in a wet basement, etc. Before cleaning, unplug the television receiver from the wall socket.

Never stand on, lean on or push the television or its stand. Never allow children to play with the television or its stand. Serious injury may result if it should fall.

Do not apply liquid cleaners or aerosol cleaners directly onto the television receiver. Use a damp cloth for cleaning.

Do not place candles or hot objects upon the TV, next to it or behind it. Open flames must never be used near the TV set.

Important:

This equipment is fitted with an approved non rewireable UK mains plug. To change a fuse in this type of plug proceed as follows:

1.Remove the fuse cover and fuse.

2.Fit a new fuse which should be a BS1362 5Amp A.S.T.A. or BSI approved type.

3.Ensure that the fuse cover is correctly refitted.

If the fuse cover is lost or damaged the plug must NOT be used but replaced with a serviceable plug.

If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a rating of 5 Amp, ensure the fuse cover is correctly fitted. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp.

Note: The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13Amp socket elsewhere.

The wires in this mains lead are coloured in accordance with the following code:

Blue -------	>	Neutral
Brown ----	>	Live

1.The Blue wire must be connected to the terminal whichis marked with the letter “N” or coloured BLACK.

2.The Brown wire must be connected to the terminal with the letter “L” or coloured RED.

3.Do not connect either wire to the earth terminal in the symbol or coloured GREEN or GREEN and YELLOW.

Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the wires.

2

SAFETY PRECAUTIONS

End-User Licence

The product (meaning the equipment or appliance to which this documentation relates) incorporates Software (the software applications, utilities and modules embedded within the Product) which is owned by Sanyo or its licensors. Before using the product, please read the End-User Licence Conditions detailed below. If you do not agree to the terms and conditions of the End-User Licence, Please do not proceed to use the Productrepack the Product unused and return it to your supplier together with proof of purchase for a full refund. By using the product, you agree to be bound by the terms and conditions of the End-User Licence.

Licence Grant, Conditions and restrictions

1.Sanyo grants you a non-exclusive, world-wide (subject to export controls), non-transferable (except as permitted by 2 below), royalty-free licence to use the Software upon and with the Product.

2.You may not transfer any of your licence rights in the Software without the prior written consent of SANYO and if consent is provided then the Software shall only be transferred in conjunction with the transfer of the Product AND provided that the transferee has read and agreed to accept the terms and conditions of this licence.

3.You must ensure that the copyright, trademark and other protective notices contained in the Software are maintained and not altered or removed.

4.The Software provided hereunder is copyrighted and licenced (not sold). SANYO especially does not transfer title or and ownership rights in the Software to you. The Software provided hereunder may contain or be derived from portions of materials provided to SANYO under licence by a third party supplier.

5.Except as expressly permitted by statute you may not;

●use the Software in conjunction with any other computer hardware other than the product;

●copy all or part of the Software;

●incorporate all (or any of) the Software into other programs developed by (or on behalf of) you and/or used by you;

●reverse-engineer, decompile or disassemble the Software;

●make the Software (or any part of it) available, or permit its redistribution, for use with any computer hardware other than the Product; or rent, lease, gift, loan, sell, distribute or transfer possession of the whole or any part of the Software.

Termination

This licence is effective until terminated. This licence will terminate automatically without notice if you fail to comply with any of its provisions.

Disclaimer

1.The Software is(to the extent permitted by law) supplied ‘as is’ and SANYO and its suppliers expressly exclude all warranties, express or implied, including (but not limited to) warranties of satisfactory quality, fitness for purpose and non-infringement (save to the extent that the same are not capable of exclusion at law).

2.In no circumstances will SANYO be liable for any direct, indirect, consequential, or incidental damage (including loss of profits, business interruption, loss of data or the cost of procurement of substitute goods, technology or services) arising out of the use or the inability to use the Software (save to the extent that such liability is not capable of exclusion at law).

General

1.This End-User Licence will be governed by laws of England and the User may only bring claims in the English Courts and SANYO shall be entitled to bring a claim in the courts of any jurisdiction.

2.The above terms and conditions supersede any prior agreement, oral or written, between you and SANYO relating to the Software.

Important recycling information.

Your SANYO product is designed and manufactured with high quality materials and components which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste.

Please dispose of this equipment at your local community waste collection/recycling centre.

In the European Union there are separate collection systems for used electrical and electronic products.

Please help us to conserve the environment we live in!

Note: This symbol mark and recycle system are applied only to EU countries and are not applied to other countries of the world.

3

INSTALLATION

Step : 1 Connections ( Essential)

Connect your aerial cable into the back of the TV set.

AV2

AV1

ANT.75Ω

Connect the power cord of the TV set to a wall outlet.

AC Mains Outlet

The TV set is prepared for a mains voltage AC220~240V, 50Hz and is fitted with a single pole mains ON/OFF switch. To completely switch off from the mains, or when the TV set is not to be used for an extended period of time it is advisable to disconnect the power cord from the power outlet.

For all aerial problems please consult your local dealer.

WARNING! High voltages are used in the operation of this set. Refer service to qualified service personnel.

●Connecting DVD / VCR player/ Satellite receiver or Set top box.

We recommend that you connect all other equipment before Plug and Play. The following example is our recommended standard connection. For further information please consult your local dealer.

TV
AV2	AV1
	ANT.75Ω

Option if no DVD

VCR	OUT

IN

	Set top box		DISH	OUT
	or			IN
		VCR	TV IN
	Satellite

For Satellite only

DVD

Please refer to individual Instruction Manuals for each piece of equipment for their connection suggestions.

Step : 2 Remote control battery installation

Install two "AA" 1.5 volt batteries so that the "+" and "-" marks on the batteries match the "+" and "-" marks inside the unit into the remote control handset.

Step : 3 Switching on / Plug & Play

Press the Mains on off switch on the front

This TV set provides a selfautomatic tuning function called Plug and Play which automatically searches and stores all of the available TV stations in your reception

area.

A welcome message will appear, once this has finished the following screen appears.

	Thank you for purchasing your
	SANYO TV.						Auto set-up completed.
	Now I am searching and storing
							Happy viewing!
	all the programmes. Please wait.

To remove the completed message press the MENU button.

Now the installation is complete!

After Plug & Play the TV set will automatically sequence the following major stations in the UK starting from programme position 1.

BBC1

BBC2

ITV

CH4

CH5

SKY, BBC-World, or BBC-Prime.

Any other channels found will be stored sequentially as they are found after the major stations.

If you move to another city or cable is installed, please follow the description “TUNING”. (on page 7).

This procedure only appears the first time you switch on.

TV front controls / Terminals

2 1 6 5

5 or 6increases or decreases the programme position.

1 or 2increases or decreases the sound volume.

Front terminals

To select the AV3 mode press the vbutton repeatedly.

When the headphones are inserted the sound from the TV speakers are muted.

Headphone	AV3 Video/ Audio-input Jacks
Jack
	From Camcorder	Camcorder
	or video game
	equipment	Game
		equipment

4