Sanyo CE20LM3A-B Instruction Manual

Do not allow anything to rest on the power

cord.

Do not locate this monitor TV receiver

where the cord will be damaged by people walking on it.

Do not overload wall outlets and extension cords as this can result in fire or electric shock.

Slots and openings in the cabinet and in the back or bottom are provided for ventilation to ensure reliable operation and to protect it from overheating. These openings

must not be blocked or

covered. The opening

should never be covered with a cloth or

other material, and the bottom openings

should not be blocked

by placing the monitor TV receiver on a bed, sofa, rug, or other similar surface.

Do not place this monitor TV or AC adaptor near any heat sources such as radiators, heaters, stoves and other heat-generating products (including amplifiers).

Do not place the monitor TV in direct sunlight.

Do not place your monitor TV receiver on an unstable stand,

shelf or table. Serious injury to an individual, and damage to the monitor TV may result if it should fall. Your sales person can recommend approved stands or shelf and wall mounting instructions. A special wall mounting kit is available for this model.

If the monitor TV is built into a unit, or enclosed, the minimum distances for ventilation must be maintained. Heat build up can reduce the life of your monitor TV, and can be dangerous.

This monitor TV receiver should be operated only from the type of power source indicated on the monitor TV or as indicated in the Operating Instructions. If you are not sure of the type of power supply in your home, consult your sales person or your local power company.

Never add accessories that have not been specifically designed for this monitor TV.

Do not drop or push objects into the monitor TV cabinet slots or openings. Some internal parts carry hazardous voltages and contact may result in an electric shock hazard.

Never spill liquids

of any kind onto the monitor TV receiver or AC adaptor.

Do not

place items such as vases containing liquid on top of the monitor TV.

Do not expose the monitor TV receiver or AC adaptor to rain or use near water. For example, near a bathtub, kitchen sink, in a wet basement, etc. Do not use immediately after moving the monitor TV from a low temperature to a high temperature environment, as this causes condensation, which may result in fire, electric shock, or other hazards. Before cleaning, unplug the monitor TV receiver from the wall socket.

Never stand on, lean on or push the monitor TV or its stand. Never allow children to play with the monitor TV or its stand.

Serious injury may result if it should fall.

Do not apply liquid cleaners or aerosol cleaners directly onto the monitor TV receiver. Only use a soft cloth for cleaning.

Do not place candles or hot objects upon the monitor TV, next to it or behind it. Open flames must never be used near the monitor TV set.

SAFETY

PRECAUTIONS

Installation

CAUTION: Please read and retain for your safety. This unit has been engineered and manufactured to assure your personal

safety, but improper use can result in potential electric shock or fire hazards. In order not to defeat the safeguards incorporated in this receiver observe the following basic rules for its installation, use and servicing.

POWER

Use

CE20LM3A-B

MINIMUM DISTANCES

10cm

4cm

● Cleaning your LCD screen.

Your LCD screen is coated in a non reflective film. Damage to this film will result in possible discolouration. Any scratches will not be repairable.

Clean your screen with a soft cloth, only rub lightly, do not use detergents.

Do not stick anything to the screen, use solvent or alcohol based cleaners, hit the screen with a hard object or rub the surface hard.

● Placement of your Monitor LCD TV.

able top stand (if included)

This Monitor LCD TV is supplied with a table top stand fitted. It can be tilted 5˚ forwards and 10˚ backwards. To tilt your TV hold the base (taking care not to trap your fingers between the bottom of the screen frame and the base)and gently push the top of the Monitor TV.

Wall mounting bracket

Optional wall brackets (VESA 100 x 100mm fixing) are available for your Monitor LCD TV. Before you consider wall mounting this Monitor TV, check that you have an appropriate wall made from solid materials such as concrete or bricks. You will have to remove the table top stand to use this.

SAFETY

PRECAUTIONS

Important:

This equipment is fitted with an AC Adaptor which has an approved non rewireable UK mains plug. To change a fuse in this type of plug proceed as follows:

1. Remove the fuse cover and fuse.

2. Fit a new fuse which should be a BS1362 3Amp A.S.T.A. or BSI approved type.

3. Ensure that the fuse cover is correctly refitted.

If the fuse cover is lost or damaged the plug must

NOT be used but replaced with a serviceable plug.

If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a rating of 3 Amp, ensure the fuse cover is correctly fitted. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp.

Note: The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13Amp socket elsewhere.

The wires in this mains lead are coloured in accordance with the following code:

Blue -------> Neutral Brown ----> Live

The Blue wire must be connected to the terminal which is marked with the letter “N” or coloured BLACK.

2. The Brown wire must be connected to the terminal with the letter “L” or coloured RED.

3. Do not connect either wire to the earth terminal in the symbol or coloured GREEN or GREEN and YELLOW.

Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the wires.

THIS UNIT IS NOT DISCONNECTED FROM THE MAINS UNLESS THE MAINS LEAD IS UNPLUGGED.

Care of your product

Your monitor television is fully transistorised and does not contain any user serviceable components.

You must not remove the rear cover of the monitor TV by yourself. The apparatus is working with high voltages and could damage objects or even endanger people. Leave all required repair and service jobs to an authorised service technician. He will exclusively use such spare parts that are complying with the same safety standards as applicable to the original parts. The use of original spare parts can prevent fire, shock and other hazards.

Unplug the monitor television receiver from the wall outlet and refer servicing to qualified service personnel under the following conditions:

■ If the power cord or plug is damaged.

■ If liquid has been spilt into the monitor

television receiver or AC Adaptor.

■ If monitor television receiver or AC Adaptor has been exposed to rain or water.

■ If the monitor television receiver or AC Adaptor has been dropped or the cabinet has been damaged.

■ If the monitor television receiver exhibits a distinct change in performance.

■ If the monitor television receiver does not operate normally by following the operating instructions.

Adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage. This will often require extensive work by a qualified technician to restore the monitor television receiver to normal operation.

Servicing

+ 2 hidden pages