WEP320 User’s Manual
Thank you for purchasing the Samsung Bluetooth Mono Headset WEP320, we hope you
will be delighted with it's operation.
Please read this user’s guide to get started, and to make the best use of the headset’s
many features.
Driving safety
z When you are driving a car, driving is your first responsibility.
z When using your headset while driving, follow local regulations in the country
or region are in.
BEFORE USING YOUR HEADSET
Checking phone compatibility
Your headset is compatible with most Bluetooth phones that are compliant with
Bluetooth version 2.0 and support the headset and/or hands-free profile(s). Ensure tha t
your phone has Bluetooth capability by visiting your phone manufacturer’s web site.
Your headset overview
Cap
Hoo
k
Volume control
buttons
Multi-functio
butto
n
n
Indicator light
Charging contac
Mic
t
Checking the accessories
Make sure you have the following items with your headset: Charging case, Travel
adapter, Manual, 2 headset hooks
Charging the headset
Your headset uses a rechargeable battery. You must charge the battery fully before
using the headset for the first time.
1. Put the headset in the supplied charging case and close the cover.
2. Plug the travel adapter into the case’s charging socket.
3. Plug the travel adapter into the electrical outlet.
z Charge the headset until the red light on the headset turns to blue.
z The headset will be fully charged in approximately 2 hours.
4. Remove the travel adapter from the case.
WARNING : Do not attempt to charge the headset with anything other than the travel
adapter provided. Using unauthorized travel adapter may damage the
headset.
IMPORTANT : Removing the travel adapter from the case during charging will turn
the headset off and stop the charging progress. The headset cannot be
used while charging.
Storage of the headset
z Always store the headset with the power off and make sure it is safely
protected.
z Avoid storage at high temperatures (above 40C/104F). such as in a hot
vehicle or in direct sunlight. (Storage at high temperatures can damaged
performance and reduce battery life).
z Do not expose the headset or any of its supplied parts to rain or other
liquids.
BASIC OPERATIONS
Turning the headset on/off
To Press and hold You will hear You will see
Turn the headset
on
Turn the headset
off
The Multi-Function
button for 4 seconds
until you see 4 blue
flashes on the indicator
light, then release.
The Multi-function
button for 4 seconds
until you see 2 blue
flashes on the indicator
light, then release.
A tone The indicator light
Series 2 tones The indicator light
flashes while the
power is on (see
Meaning of the
indicator light).
stops flashing.