Samsung VP-HMX10A, VP-HMX10C, VP-HMX10CN, VP-HMX10ED, VP-HMX10N User Manual
High Definition Digital
Camcorder
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/global/register
VP-HMX10
VP-HMX10A
VP-HMX10C
VP-HMX10N
VP-HMX10CN
VP-HMX10ED
key features of your HD camcorder
The HD camcorder is capable of recording and playing back both High Definition (HD: 1280x720p) and Standard
Definition (SD: 720x576p) image quality. Select the recording image quality, HD (high definition) or SD (standard definition),
before recording.
ENJOYING IMAGES WITH HIGH DEFINITION (HD) QUALITY
You can view record video with HD (high definition) image quality.
• This HD camcorder adopts the advanced 720p effective scanning lines to reproduce a sharper image than
previous SD camcorders (576i) It also supports widescreen recording with an aspect ratio of 16:9.
• Recordings made in HD (high definition) image quality will fit widescreen (16:9) HDTVs.
If your TV is not a high definition TV, movies with HD (high definition) image quality will be displayed with SD (standard
definition) image quality.
- To enjoy HD-quality images, you need a TV supporting 1280x720p input.
(Refer to the user manual of your TV.)
- To enjoy the HD-quality images, use an HDMI or Component cable.
• The image is recorded in 720x576p when the quality is set to SD in the HD camcorder.
Videos recorded at SD (standard definition) image quality cannot be converted to HD (high definition).
HD (high definition) image quality
: 50p (Progressive)
1280
720
<720p / 16:9 high definition camcorder>
Image resolution: about 5 times that of previous SD camcorders (576i).
ii_ English
SD (standard definition) image quality
: 50i (interlaced)
720
576
<576i / normal digital camcorder>
FEATURES OF YOUR NEW HD CAMCORDER
POWER
POWER
150
Anynet+
supported
Anynet+
supported
1.61 Mega pixel (Gross) CMOS sensor
1/4.5” CMOS sensor provides stunning detail and clarity with exceptional video (1280 lines of resolution-HD mode
or 720 lines of horizontal resolution-SD mode) and still image performance (3.0 mega pixels). Unlike traditional CCD
imagers, CMOS sensors require less power, providing better battery performance.
High-capacity embedded flash memory (VP-HMX10A/HMX10C/HMX10CN/HMX10ED only)
The HD camcorder has built-in high capacity flash memory that allows you to record movie or photo images.
H.264 (MPEG4 part10/AVC) encoding
The latest video compression technology, H.264 uses a high compression rate
to sharply increase the recordable time for the same size storage.
HDMI interface (Anynet+ supported)
• If you have an HDTV with an HDMI jack, you can enjoy a clearer and
sharper image when compared to a standard definition TV.
• This HD camcorder supports Anynet+.
Anynet+ is an AV network system that enables you to control all connected
Samsung AV devices with an Anynet+ supported Samsung TV remote
control. Refer to the corresponding TV’s user manual for more details.
2.7” wide (16:9) touch panel LCD screen (230K pixels)
The 2.7” wide (16:9) LCD screen provides excellent viewing clarity with improved
resolution. The 230K pixel LCD screen rotates up to 270 degrees for multiple viewing
angles providing sharp, detailed images for monitoring or playback, and the widescreen
format makes shooting in 16:9 mode and composing shots even easier.
Touch panel adopted
You can play recorded images and set functions by simply tapping on the LCD screen.
Swivel handle for free style shooting
You can adjust the swivel handle’s angle up to 150° to suit the recording situation.
English _iii
safety warnings
What the icons and signs in this user manual mean:
WARNING
Means that death or serious personal injury is a risk.
CAUTION
CAUTION
These warning signs are here to prevent injury to you and others.
Please follow them explicitly. After reading this section, keep it in a safe place for future reference.
Means that there is a potential risk for personal injury or material damage.
To reduce the risk of fire, explosion, electric shock, or personal injury when using your HD
camcorder, follow these basic safety precautions:
Means hints or referential pages that may be helpful when operating the HD camcorder.
precautions
•
•
iv_ English
This camcorder should always be connected to an AC outlet with a protective grounding connection.
Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket,
therefore the mains plug shall be readily operable.
Warning!
Caution
important information on use
BEFORE USING THIS CAMCORDER
• This HD camcorder records video in H.264 (MPEG4 part10/AVC) format and at High (HD-VIDEO) and
Standard Resolution (SD-VIDEO).
• Please note that this HD camcorder is not compatible with other digital video formats.
• Before recording important video, make a trial recording.
Play back your trial recording to make sure the video and audio have been recorded properly.
• The recorded contents cannot be compensated for:
- Samsung cannot compensate for any damage caused when a recording cannot be played back because of a
defect in the HD camcorder or memory card.
Samsung cannot be responsible for your recorded video and audio.
- Recorded contents may be lost due to a mistake when handling this HD camcorder or memory card, etc.
Samsung shall not be responsible for compensation for damages due to the loss of recorded contents.
• Make a backup of important recorded data
Protect your important recorded data by copying the files to a PC. We also recommend you copy it from your PC
to other recording media for storage. Refer to the software installation and USB connection guide.
• Copyright: Please note that this HD camcorder is intended for individual use only.
Data recorded on the storage media in this HD camcorder using other digital/analogue media or devices is
protected by the copyright act and cannot be used without permission of the owner of copyright, except
for personal enjoyment. Even if you record an event such as a show, performance or exhibition for personal
enjoyment, it is strongly recommended that you obtain permission beforehand.
English _v
important information on use
ABOUT THIS USER MANUAL
• This user manual covers models VP-HMX10, VP-HMX10A, VP-HMX10C, VP-HMX10N, VP-HMX10CN, and
VP-HMX10ED.
The VP-HMX10A, VP-HMX10C/HMX10CN, and VP-HMX10ED have a 4GB, 8GB, and 16GB built-in flash memory
respectively but also use memory cards. The VP-HMX10/HMX10N does not have built-in flash memory and uses
memory cards exclusively.
Although some features of VP-HMX10, VP-HMX10A, VP-HMX10C, VP-HMX10N, VP-HMX10CN, and VPHMX10ED are different, they operate in the same way.
• Illustrations of model VP-HMX10A are used in this user manual.
• The displays in this user manual may not be exactly the same as those you see on the LCD screen.
• Designs and specifications of the camcorder and other accessories are subject to change without any notice.
NOTES REGARDING TRADEMARKS
• All the trade names and registered trademarks mentioned in this manual or other documentation provided with
your Samsung product are trademarks or registered trademarks of their respective holders.
• Windows® is registered trademark or trademark of Microsoft Corporation, registered in the United States and
other countries.
• Macintosh is the trademark of Apple Computer, Inc.
• All the other product names mentioned herein may be the trademark or registered trademarks of their respective
companies.
• Farther more, “TM” and “R” are not mentioned in each case in this manual.
vi_ English
precautions when using
IMPORTANT NOTE
• Handle the liquid crystal display (LCD) with care:
- The LCD is a very delicate display device: Do not press its surface with force, hit it or prick it with a sharp
object.
- If you push the LCD surface, unevenness in display may occur. If unevenness does not disappear, turn the
camcorder off, wait for a few moments, and then turn it on again.
- Do not place the camcorder with the open LCD screen down.
- Close the LCD screen when not using the camcorder.
Liquid crystal display:
- The LCD screen of this product uses high precision technology. Among the total number of pixels (approx.
230,000 pixels for LCD screen), 0.01% or less pixels may be missing (black dots) or may remain lit as coloured
dots (red, blue, green). This shows the limitations of the current technology, and does not indicate a fault that
will interfere with recording.
- The LCD screen will be slightly dimmer than usual when the camcorder is at low temperature, as in cold areas,
or immediately after power is turned on. Normal brightness will be restored when the temperature inside the
camcorder rises. This has no effect on the images in the storage media, so there is no cause for concern.
• Hold the HD camcorder correctly:
Do not hold the HD camcorder by the LCD screen when lifting it: the LCD screen could detach and the HD
camcorder may fall.
• Do not subject the HD camcorder to impact:
-
This HD camcorder is a precision machine. Take great care that you do not strike it against a hard object or let it fall.
- Do not use the HD camcorder on a tripod (not supplied) in a place where it is subject to severe vibration or
impact.
• No sand or dust!
Fine sand or dust entering the HD camcorder or AC power adaptor could cause malfunctions or defects.
• No water or oil!
Water or oil entering the HD camcorder or AC power adaptor could cause electric shock, malfunctions or defects.
• Heat on surface of product:
The surface of the HD camcorder will be slightly warm when in use, but this does not indicate a fault.
• Be careful of ambient temperature:
- Using the HD camcorder in a place where the temperature is over 60°C (140°F) or under 0°C (32°F) will result
in abnormal recording/playback.
- Do not leave the HD camcorder on a beach or in a closed vehicle where the temperature is very high for a long
time: This could cause a malfunction.
English _vii
precautions when using
• Do not point directly at the sun:
- If direct sunlight strikes the lens, the HD camcorder could malfunction or a fire could occur.
- Do not leave the HD camcorder with the LCD screen exposed to direct sunlight: This could cause a
malfunction.
• Do not use the HD camcorder near TV or radio:
This could cause noise to appear on the TV screen or on radio broadcasts.
• Do not use the HD camcorder near strong radio waves or magnetism:
If the HD camcorder is used near strong radio waves or magnetism, such as near a radio transmitter or electric
appliances, noise could enter video and audio that are being recorded. During playback of normally recorded
video and audio, noise may also be present in picture and sound.
• Do not expose the HD camcorder to soot or steam:
Thick soot or steam could damage the HD camcorder case or cause a malfunction.
• Do not use the HD camcorder near corrosive gas:
If the HD camcorder is used in a place where there is dense exhaust gas generated by gasoline or diesel engines,
or corrosive gas such as hydrogen sulfide, the external or internal terminals could corrode, disabling normal
operation, or the battery connecting terminals could corrode, so that power will not turn on.
• Do not wipe the HD camcorder body with benzene or a thinner:
- The exterior coating could peel off or the case surface could deteriorate.
• Keep the memory card out of reach of children to prevent swallowing.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection
systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other
household wastes at the end of its working life. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to
promote the sustainable reuse of material resources. Household users should contact either the retailer where
they purchased this product, or their local government office, for details of where and how they can take this
item for environmentally safe recycling. Business users should contact their supplier and check the terms
and conditions of the purchase contract. This product should not be mixed with other commercial wastes for
disposal.
viii_ English
contents
INTRODUCTION TO BASIC
FEATURES
GETTING TO KNOW YOUR HD
CAMCORDER
06
PREPARATION
10
BEFORE RECORDING
26
05
06 What is included with your HD camcorder
07 Front & left view
08 Right & top view
09 Rear & bottom view
10 Using the remote control
11 Installing the button-type battery
11 Using the cradle
12 Holding the HD camcorder
13 Charging the battery pack
17 Basic HD camcorder operation
18 Screen indicators
22 Using the display ( )/iCHECK button
22 Using the LCD enhancer ( )
23 Using the LCD screen
24 Initial setting: OSD language & date and time
26 Selecting the storage media (VP-HMX10A/HMX10C/
HMX10CN/HMX10ED only)
27 Inserting/ejecting a memory card
28 Recordable time and number of images
29 Selecting a suitable memory card
English _01
contents
02_ English
RECORDING
31
PLAYBACK
38
CONNECTION
USING THE MENU ITEMS
47
31 Recording movie images
33 Taking photo images
34 Recording with ease for beginners (EASY Q mode)
35 Capturing still images during movie image playback
36 Using the external microphone
36 Zooming
37 Self record using the remote control
38 Changing the playback mode
39 Playing movie images
41 Viewing photo images
43 Connecting to a TV
46 Dubbing images on a VCR or DVD/HDD recorder
47 Handling menus and quick menus
49 Menu items
51 Quick menu items
52 Recording menu items
64 Playback menu items
66 Setting menu items
EDITING MOVIE IMAGES
72
72 Deleting a section of a movie image
73 Dividing a movie image
74 Combining two movie images
75 Playlist
IMAGE MANAGEMENT
78
PRINTING PHOTO IMAGES
CONNECTING TO A PC
85
78 Protection from accidental erasure
79 Deleting images
80 Copying images
81 Moving images
82 DPOF print setting
83 Direct printing with a PictBridge printer
85 System requirements
86 Installing the Cyberlink DVD Suite
88 Connecting the USB cable
89 Viewing the contents of storage media
91 Transferring files from the HD camcorder to your PC
(VP-HMX10A/HMX10C/HMX10CN/HMX10ED only)
(VP-HMX10A/HMX10C/HMX10CN/HMX10ED only)
English _03
contents
MAINTENANCE & ADDITIONAL
INFORMATION
TROUBLESHOOTING
SPECIFICATIONS
POWER SOURCES
(UNITED KINGDOM ONLY)
4_ English
92 Maintenance
93 Additional information
95 Using your HD camcorder abroad
96 Troubleshooting
109
110
introduction to basic features
INSERT
BATTERY
PACK
INSERT
BATTERY
PACK
This chapter introduces you to the basic features of your HD camcorder.
See the reference pages below for more information.
Step 1
Preparation
• Charging the battery pack page 13
• Setting the date/time and OSD language pages 24-25
• Setting the storage media (built-in memory or memory card) page 26
(VP-HMX10A/HMX10C/HMX10CN/HMX10ED only)
Step 2
Recording
• Recording movie or photo images pages 31, 33
Step 3
Playing back
• Selecting an image to play back from the thumbnail index views
pages 39, 41
• Viewing play back from your HD camcorder on your PC or TV
pages 43, 88
English _05
getting to know your HD camcorder
WHAT IS INCLUDED WITH YOUR HD CAMCORDER
Your new HD camcorder comes with the following accessories. If any of these items is missing from your box, call
Samsung’s Customer Care Centre.
The exact appearance of each item may vary by model.
✪
Battery pack (IA-BP85ST)
AC power adaptor (AA-E9 type)
Multi-AV cable
Component cable
USB cable
User manual
Button-type battery
Remote control
Cradle
Software CD
Pouch
HDMI cable*
Carrying Case*
The contents may vary depending on the sales region.
Parts and accessories are available at your local Samsung
dealer.
* : This is an optional accessory. To buy this one, contact
your nearest Samsung dealer.
A memory card is not included. See page 29 for memory
cards compatible with your HD camcorder.
06_ English
FRONT & LEFT VIEW
Recording indicator
LED Light
Remote sensor
Lens
Internal microphone
Built-in speaker
Display ( ) / iCHECK button
LCD enhancer ( ) button
USB jack
COMPONENT / AV / S-Video () jack
RESET button
HDMI jack
Jack cover
TFT LCD screen (Touch panel)
Recording start/stop button
Zoom (W/T) button
Q.MENU button
English _07
POWER
getting to know your HD camcorder
RIGHT & TOP VIEW
CLOSE
OPEN
PHOTO button
Zoom (W/T) lever
Battery pack slot
BATT. RELEASE switch
Memory card slot
08_ English
Battery pack / Memory card cover
Grip belt hook
Grip belt
Swivel handle
Lens open / close switch
REAR & BOTTOM VIEW
MODE button / Mode indicator
(Movie ( ) / Photo ( ) / Play ( ) mode)
EASY Q button
DC IN jack
Recording start/stop button
POWER switch
External microphone (MIC) jack
Charging (CHG) indicator
Tripod receptacle
Cradle receptacle
English _09
preparation
This section provides information on using this HD camcorder; such as how to use the provided accessories, how to
charge the battery, how to set up the operation mode and initial set up.
USING THE REMOTE CONTROL
10_ English
REC button
DISPLAY ( ) button
Skip (/) button
Stop ( ) button
MENU button
Control (
PHOTO button
Zoom (W/T) button
SELF TIMER button
Search (/) button
Slow playback ( ) button
Play/Pause ( ) button
Q.MENU button
The buttons on the remote control function the
same as those on the HD camcorder.
/ / / /
) buttons
INSTALLING THE BUTTON-TYPE BATTERY
Installing the button-type battery in the remote control
1. Turn the battery holder counterclockwise (as indicated with () mark) using your
fingernail or a coin to open it. The battery holder opens.
2. Insert the battery into the battery holder with the positive (+) terminal facing down and
press it firmly until you hear a locking sound.
3. Place the battery holder back in the remote control, match its () mark with the ()
mark on the remote control, and turn the battery holder clockwise to lock it.
Precautions regarding the button-type battery
• There is a danger of explosion if button-type battery is incorrectly replaced. Replace
only with the same or equivalent type.
• Do not pick up the battery using tweezers or other metal tools. This will cause a short
circuit.
• Do not recharge, disassemble, heat or immerse the battery in water to avoid the risk
of explosion.
Keep the button-type battery out of the reach of the children.
Should any battery be swallowed, consult a doctor immediately.
WARNING
USING THE CRADLE
The cradle is a connection plate which can be used to make the
camcorder more stable when charging the battery, or connecting to
an external device (TV, PC, etc.).
• If you connect your HD camcorder to the provided cradle
using more than one type of cable to output image, the order
of priority of the output signal is as follows:
USB cable
Component /Multi-AV cable.
• Do not connect the connection cables at the same time, it
may cause conflict and may not work properly.
If this occurs, remove all the connected cables and try the
connection again.
DC IN jack
USB jack Component/Multi-AV
1
2
Battery
holder
3
Cradle
receptacle
jack
English _11
preparation
150
10
HOLDING THE HD CAMCORDER
Attaching the grip belt
Insert your right hand from the bottom of the HD camcorder up to the base of your thumb.
Put your hand in a position where you can easily operate the Recording start/stop button, PHOTO button, and the
Zoom lever.
Adjust the length of grip belt so that the HD camcorder is stable when you press the Recording start/stop button
with your thumb.
1. Detach the belt.
2. Adjust the length of the grip belt and attach it.
Angle Adjustment
Rotate the swivel handle at the most convenient angle.
You can rotate it downward from 10° to 150°.
Please be careful not to turn the swivel handle backward as
it may cause damage.
12_ English
CHARGING THE BATTERY PACK
• Use the IA-BP85ST battery pack only.
• The battery pack may be charged a little at the time of purchase.
• Be sure to charge the battery pack before you start using your HD camcorder.
Inserting the battery pack
1. Slide and open the battery pack cover as shown in the diagram.
2. Insert the battery pack into the battery pack slot until it softly
clicks.
• Make sure that word mark (SAMSUNG) is facing down while
the camcorder is placed as shown in the diagram.
3. Slide and close the battery pack cover.
Charging the battery pack
1. Slide the POWER switch downwards to turn off the power.
2. Open the DC IN jack cover and connect the AC power adaptor to
the DC IN jack.
3. Connect the AC power adaptor to a wall socket.
4. Once charged, disconnect the AC power adaptor from the DC IN
jack on your HD camcorder.
• Even with the power switched off, the battery pack will still
discharge if it is left inserted in the HD camcorder.
• You can also charge with the cradle. page 11
• It is recommended you purchase one or more additional battery packs to allow continuous use of your HD
camcorder.
Use only Samsung-approved battery packs. Do not use batteries from other manufacturers.
Otherwise, there is a danger of overheating, fire or explosion.
Samsung is not responsible for problems occurring due to using unapproved batteries.
English _13
preparation
Charging indicator
The colour of the CHG lamp indicates the power or charging state.
• If the battery pack has been fully charged, the charge indicator is
green.
• If you are charging the battery, the colour of the charge indicator is
orange.
• If an error occurs while the battery pack in charging, the charging
indicator blinks green.
<Charging indicator>
Charging, recording and playback times with a fully charged battery pack (with no zoom
operation, LCD open, etc.)
Battery type IA-BP85ST
Charging time approx. 80 min
Recording format Continuous recording time
HD approx. 80 min approx. 100 min
SD approx. 85 min approx. 110 min
• Measured times shown above are based on model VP-HMX10A.
(Times for VP-HMX10A/HMX10C/HMX10CN/HMX10ED are almost the same)
• The time is only for reference. Figures shown above are measured under Samsung’s test environment, and may
differ from your actual use.
• The recording time shortens dramatically in a cold environment. The continuous recording times in the operating
instructions are measured using a fully charged battery pack at 25 °C (77 °F). As the environmental temperature
and conditions vary, the remaining battery time may differ from the approximate continuous recording times given
in the instructions.
Playback time
14_ English
Continuous recording (without zoom)
The times shown in the table reflect the available recording time when the HD camcorder is in the recording mode
without using any other functions. In actual recording, the battery pack may discharge 2-3 times faster than this
reference since the Record start/stop and Zoom are being operated, and playback is performed. Assume that the
recordable time with a fully charged battery pack is between 1/2 and 1/3 of the time in the table, and enough battery
packs to allow for the time you are planning to record on the HD camcorder.
Note that the battery pack discharges faster in a cold environment.
• The charging time will vary depending on the remaining battery level.
• To check the remaining battery charge, press and hold the Display ( )/iCHECK button. page 22
Ejecting the battery pack
1. Slide and open the battery pack cover.
2. Slide the BATT. RELEASE switch and pull out the battery pack.
• Gently slide the BATT. RELEASE switch in the direction as
shown in the diagram.
3. Slide and close the battery pack cover.
• Additional battery packs are available at your local Samsung
dealer.
• If the HD camcorder will not be in use for a while, remove the
battery pack from the HD camcorder.
About battery packs
• The battery pack should be recharged in an environment that is between 0°C (32°F) and 40°C (104°F). However,
when it is exposed to cold temperatures (below 0°C (32°F)), its usage time becomes reduced and it may cease
to function. If this happens, place the battery pack in your pocket or other warm, protected place for a short time,
then re-insert it in the HD camcorder.
• Do not put the battery pack near any heat source (i.e. fire or a heater).
• Do not disassemble, apply pressure to, or heat the battery pack.
• Do not allow battery pack terminals to be short-circuited. It may cause leakage, heat generation, induce
overheating or fire.
English _15
preparation
Maintaining the battery pack
• The recording time is affected by temperature and environmental conditions.
• We recommend only using the original battery pack that is available from your Samsung retailer. When the battery
reaches the end of its life, please contact your local dealer.
The batteries have to be treated as chemical waste.
• Make sure that the battery pack is fully charged before starting to record.
• To preserve battery power, keep your HD camcorder turned off when you are not operating it.
• Even when the power is switched off, the battery pack will still discharge if it is left inserted on the HD camcorder.
When not using the HD camcorder for an extended time period, preserve it with the battery completely separated.
• For power saving purposes, the HD camcorder will automatically turn off after 5 minutes in standby mode. (Only if
you set “Auto Power Off” from the menu to on (“ 5 min ”).)
• When fully discharged, a battery pack damages the internal cells. The battery pack may be prone to leakage
when fully discharged. Charge the battery pack at least once every 6 months to prevent complete discharge of
the battery pack.
About the battery life
Battery capacity decreases over time and through repeated use. If decreased usage time between charges becomes
significant, it is probably time to replace it with a new one.
Each battery’s life is affected by storage, operating and environmental conditions.
Using the HD camcorder with the AC power adaptor
It is recommended that you use the AC power adaptor to power the HD camcorder from a household AC outlet
when you perform settings on it, playback, or edit images, or use it indoors. page 13
• Before detaching the power source, make sure that the HD camcorder’s power is turned off. Failure to do
CAUTION
so can result in camcorder malfunction.
• Use a nearby wall outlet when using the AC power adaptor. Disconnect the AC power adaptor from the wall
outlet immediately if any malfunction occurs while using your HD camcorder.
• Do not use the AC power adaptor in a narrow space, such as between a wall and furniture.
16_ English
BASIC HD CAMCORDER OPERATION
Set the appropriate operation mode according to your preference using the POWER switch and MODE button.
Turning the HD camcorder on and off
You can turn the camcorder on or off by sliding the POWER switch downward.
• Set the date and time when using your HD camcorder for the first time.
page 25
• When you use your HD camcorder for the first time or you reset it, you will
see the “Date/Time Set” menu for the startup display. If you do not set
the date and time, the date and time setting screen appears every time
you turn on your camcorder.
Mode indicator
Setting the operating modes
• You can switch the operating mode in the following order each time you press
the MODE button.
Movie mode ( ) Photo mode ( ) Play mode ( ) Movie mode ( )
• Each time the operational mode changes, the respective mode indicator
lights up.
- Movie mode ( ): To record movie images. page 31
- Photo mode ( ): To record photo images. page 33
- Play mode ( ): To play movie or photo images, or edit them. page 38
• When the HD camcorder is turned on, the self-diagnosis function
operates and a message may appear. In this case, refer to “Warning
indicators and messages” (on pages 96-99) and take corrective action.
• Movie mode is set by default with the power on.
POWER switch
MODE button
System Reset
If the HD camcorder does not operate normally, perform “System Reset”: The HD
camcorder may recover to normal. “System Reset” will reset all settings to factory
defaults. The date and time will also be reset: Set the date and time again before
using the HD camcorder.
1. Turn the HD camcorder off.
• Remove the battery pack or AC adaptor.
2. Use a fine tipped pen to hold down the RESET button.
• All settings will be reset.
Do not press the RESET button with undue force.
English _17
preparation
SCREEN INDICATORS
STBY 00:00:00 [44Min]
S.1/50
• The OSD indicators are based on memory capacity of 4GB (built-in
memory).
• The above screen is an example for explanation: It is different from
the actual display.
• Functions marked with * will not be retained when the HD
camcorder is powered on after turning it off.
• For enhanced performance, the display indications and the order
are subject to change without prior notice.
(
) The maximum available recording time displayed is 999 minutes
even though the actual available recording time exceeds 999
minutes. However, the actual available recording time is not
affected by the count displayed.
For example, when the actual available recording time is “1,066”
minutes, “999” will be displayed on the screen.
Open Lens Cover
01/JAN/2007 00:00
10
page 28
18_ English
80
Min
10
Movie record mode
Movie record mode
Operating mode (STBY (standby) or
Time counter (movie recording time) / Self timer*
Warning indicators and messages
Remaining recordable time
Storage media (built-in memory (VP-HMX10A/HMX10C/
HMX10CN/HMX10ED only) or memory card)
Battery info. (remaining battery level/time)
Movie image quality
LCD enhancer
Anti-Shake (EIS)
LED light*
Tele macro
Wind cut
Back light
Component out (when component cable is connected.)
TV type
Menu tab
Zoom / Digital zoom position*
Date/Time
Record/Play mode tab
Shutter speed*
Manual exposure*
Manual focus*
White balance
Fader*
Scene mode (AE) / EASY Q
Digital effect*
(recording))
()
(when component or Multi-AV cable is connected.)
Movie play mode
80
Movie play mode
00:00:20 / 00:10:00
100-0001
Memory full!
10
80
Min
01/JAN/2007
00:00
The play related tabs disappear on the screen a few
seconds (about 3 seconds) after the image plays
back. They reappear when you touch any point on
the screen.
Operating status (Play/Pause)
File name (file number)
Time code (elapsed time / recorded time)
Warning indicators and messages / Volume control
Storage media (built-in memory (
HMX10C/HMX10CN/HMX10ED
Battery info. (remaining battery level/time)
LCD enhancer
Movie image quality / Edited movie image indicator
VP-HMX10A/
only) or memory card)
(partial delete, divide, combine)
Date/Time
TV type
(when component or Multi-AV cable is connected.)
Component out
(when component cable is connected.)
Menu tab
Movie play related function tab
(Skip / Search / Play / Pause / Slow Playback)
Return tab
Volume tab
Erase protection
Cont. Capture
Play option
English _19
preparation
10
(
) The maximum number of recordable images displayed
is 99,999 even though the actual number of recordable
images exceeds 99,999. However, the actual number of
recordable images is not affected by the count displayed.
page 28
For example, when the actual number of recordable
images is “156,242,” “99,999” will be displayed on the
screen.
Open Lens Cover
01/JAN/2007 00:00
7697
20_ English
Photo record mode
Photo record mode
Self timer*
80
Min
Warning indicators and messages
Image counter
(total number of recordable photo images) ()
Storage media (built-in memory (
HMX10C/HMX10CN/HMX10ED
Battery info. (remaining battery level/time)
LCD enhancer
Cont. shot
Tele macro
Back light
TV type
(when component or Multi-AV cable is connected.)
Component out
(when component cable is connected.)
Menu tab
Zoom position*
Date/Time
Record/Play mode tab
Manual exposure*
Manual focus*
White balance
Resolution
Scene mode (AE) / EASY Q
VP-HMX10A/
only) or memory card)
100-0001
01
X 1.1
1 / 12
80
Min
01/JAN/2007
00:00
Photo play mode
Photo play mode
Slide show / Playback zoom
File name (file number)
Image counter
(current image / total number of recorded images)
Storage media (built-in memory (
HMX10C/HMX10CN/HMX10ED
VP-HMX10A/
only) or memory card)
Battery info. (remaining battery level/time)
LCD enhancer
Date/Time
TV type
(when component or Multi-AV cable is connected.)
Component out
(when component cable is connected.)
Previous image / Next image tab
Menu tab
Return tab
Erase protection
Print mark (DPOF)
Resolution
English _21
preparation
USING THE DISPLAY ( )/iCHECK BUTTON
Switching the information display mode
You can switch between the on-screen information display modes:
Press the Display ( )/iCHECK button.
The full and minimum display modes will alternate.
• Full display mode: All information will appear.
• Minimum display mode: Only operating status indicators will appear.
If the HD camcorder has warning information, a warning message will appear.
Checking the remaining battery and recording capacity
• When the power is on, press and hold the Display ( )/iCHECK button.
• When the power is off, press the Display ( )/iCHECK button.
• After a while, the battery time and approximate recordable time according to the
storage and quality appear for about 10 seconds. If a storage media is not inserted,
its icon does not appear.
Display ( )/iCHECK button does not work in the menu or quick menu screen.
USING THE LCD ENHANCER ( )
Contrast is enhanced for a clear and bright image. This effect is also implemented
outdoors in bright daylight.
1. Press the LCD enhancer ( ) button.
• The ( ) indicator is displayed.
2. To exit LCD enhancer, press the LCD enhancer ( ) button again.
• LCD enhancer function does not affect the quality of the image being recorded.
• When LCD enhancer works at the low illumination, some stripes may occur on
the LCD screen. It is not a malfunction.
Remaining battery (approx.)
Battery
80 Min
Memory (Super Fine)
Recordable memory capacity (approx.)
0%
50% 100%
044 Min 022 Min
STBY 00:00:00 [44Min]
80
Min
22_ English
Loading...