![](/html/6c/6c87/6c87f2013ba19eae7f76da81ba4880ac309262622eb2287ac6a30320c16c588c/bg1.png)
Figuresandillustrationsinthis UserManualareprovidedforreference Transportation to and from theService Center isthe responsibility of
onlyandmaydifferfrom actualproductappearance.Productdesignand tile purchaser. Conditions covered are limited only to manufacturing
spedficationsmaybe changedwithoutnotice, defects in material or workmanship, and only those encountered
Important Warranty Information Regarding
Television Format Viewing
'_ See tile warranty card for more information oil warranty
terms.
Wide screen format LED Displays (16:9, the aspect ratio of the
screen width to height) are primarily designed to vies! wide screen
format full-motion video. The images displayed on them should
primarily be inthe wide screen 16:9 ratio format, or expanded to
fill the screen ifyour model offers this feature and the images are
constantly moving. Displaying stationary graphics and images on
screen, such as the dark sidebars on non- expanded standard
format television video and programming, should be limited to no
more than 5% of the total television viewing per week. Additionally,
viewing other stationary images and text such as stock market
reports, video game displays, station Iogos, web sites or computer
graphics and patterns, should be limited as described above for
alltelevisions. Displaying stationary images that exceed the above
guidelines can cause uneven aging of LED Displays that leave
subtle, but permanent burned-in ghost images in the LED picture.
To avoid this, vary the programming and images, and primarily
display full screen moving images, not stationary patterns or dark
bars. On LED models that offer picture sizing features, use these
controls to vies! different formats as a full screen picture. Be careful
in the selection and duration of television formats you use for
viewing. Uneven LED aging as a resultof format selection and use,
as well as burned-in images, are not covered by your Samsung
limited warranty.
- SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED
WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations
of the original Limited Warranty supplied with Samsung Electronics
(SAMSUNG) products, and the requirements, conditions, exclusions
and limitations contained herein, SAMSUNG will additionally
provide Warranty RepairService in the UnitedStates on SAMSUNG
products purchased in Canada, and inCanada on SAMSUNG
products purchased in the United States, for the warranty period
originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a
SAMSUNG Authorized Service Center. Along with this Statement,
the Original Limited Warranty Statement and a dated Bill of Sale
as Proof of Purchase must be presented to the Service Center.
in normal useof the product. Excluded, but not limited to, are
any originally specified provisions for,in-home or on-site services
minimum or maximum repair times, exchanges or replacements,
accessories, options, upgrades, or consumables.
For the location of aSAMSUNG Authorized Service Center, please
call toll-free:
-- In the United States : 1-800-SAMSUNG (1-800-726-7864)
-- In Canada : 1-800-SAMSUNG
Still image warning
Avoid displaying still images (such as jpeg picture flies) or still
image elements (such as TV channel Iogos, TVshows or movies
in panorama or 4:3format, stock or news scroll bars, etc.)on the
screen. The constant display of still pictures can cause ghosting or
image bum-in (image retention)on the LED screen, which will affect
image quality. To reduce the riskof this effect, please follow the
recommendations below:
- Avoid displaying the same TV channel for long periods.
- Always try to display any image infull screen mode. Usethe TV's
Picture Options menu to select the optimal screen size.
- Reduce brightness and contrast values to the minimum required
to achieve the desired picture quality. Values that exceed the
minimum may speed up the bum-in process.
- Frequently use allTV features designed to reduce image retention
and screen bum-in. Refer to proper user manual section for
details.
w-.-. ....... . ......... =--.--= ..... ----.= ..... i
€ontact SAMSUNG WORLDWIDE i
If you haveany questions or comments relating to Samsung products, II
please contact the SAMSUNG customer care center, iI
Samsung Electlonics
Canada Inc., Customer
Service 55 Standish Cour[
Mississauga, Ontario LSR
1 800 SAMSUNG(726 7864)
www samsung.com/ca
(English)
www samsung.com/ca tr
(F/ench)
Samsung Electronics
America, Inc
85 Challenger Road
Ridgefleld Park, NJ
www,samsung.com/us
IIIIIIIIIIIIIIIIIIIIIIIIIII
BN68 04499A 02
(4:)2012 Samsung Electronics Co., Ltd. All rigMs reserved.
Your TV has two kinds of menus, the Main menu and the various
Tools menus. The Main menu gives you access to most or all of
the menu options available on your T_ The Tools menus display
a selected number of frequently used menu options that change
depending on the screen you are viewing. A Tools menu symbol
(_']) in the lower right side of the screen indicates that a Tools menu
is available.
The Main menu has seven primary categories:
" Picture " Input
" Sound " Application
" Channel - Support
- Setup
To vies! the Main menu, press the MENU button on your remote. To
view a Tools menu, press the TOOLS button on your remote.
'_' The menu options that appear in the Main menu depend
on the Source you have selected. For example, ifyou have
selected the HDMI source, the Channel category will not
appear. To see the Channel category, you must first select TV
in the Source List.
The Menu options are presented below, arranged by Main menu
categories. A Tools button symbol (EI_I_I) next to an option
name indicates the option is also available in one of theTools
menus.
Mode
Select your preferred picture mode.
'_' When your TV isconnected to a PC, you can only select
Entertain and Standard.
[] Dynamic: Brightens the screen. Suitable for a bright room.
[] Standard: Suitable for a normal.
[] Movie: Darkens the screen, making it less glary. Suitable for
watching movies ina darkened room.
[] Entertain: Sharpens the picture. Suitable for games.
_ Only available when the TV isconnected to a PC.
Backlight / Contrast / Brightness / Sharpness /
Color / Tint (G/R)
[] Backlight: Adjusts the brightness of the screen by adjusting the
brightness of the individual pixels.
[] Contrast: Increases or decreases the contrast between dark and
light areas of the picture.
[] Brightness: Adjusts the brightness of the screen. Not as
effective as Backlight.
[] Sharpness: Sharpens or dulls the edges of objects.
[] Color: Adiusts the color saturation, The higher the Color setting,
the more intense the color. Los! settings remove color and the
picture becomes black, white and gray.
[] Tint: Adjusts the amount of green and red inthe picture. As you
increase the amount of green, the amount of red decreases and
vice versa.
'_' When the TV is connected to a PC, you can only make
changes to Backlight, Contrast, Brightness, and
Sharpness.
Advanced Settings
Available in Standard and Movie mode only.
Compared to previous models, new Samsung TVs offer a more
precise picture with more precise controls.
'_' When your TV isconnected to a PC, you can only make
changes to Gamma and White Balance.
[] Color Space (Auto / Native): Auto automatically matches the
range of colors available to create pictures to the color range of
the video source. Native provides a color range wider than the
color range of the video source.
[] White Balance: Adjusts the color temperature of the picture so
that white objects look white (instead of, for example, slightly
pink or slightly yellow) and the overall color of the picture looks
natural.
R-Offset / G-Offset / B-Offset: Adjusts each color's (red,
green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjusts each color's (red, green,
blue) brightness.
Reset: Resets the White Balance to it's default settings.
[] Gamma: Adjusts the primary color intensity.
[] Dynamic Contrast (Off / Low / Medium / High): Adjusts the
screen contrast.
[] Black Tone (Off / Dark / Darker / Darkest): Selects the black
level to adjust the screen depth. Darker settings make blacks
look darker.
[] Flesh Tone: Adjusts the amount of red in skin tones.
[] Motion Lighting (Off / On): When on,the TV automatically
adjusts the brightness of the screen in response to the
brightness of the room. Inbright light, the screen brightens. In
dim light, the screen dims.
_' Available in Standard mode only.
Picture Options
'_' When the TV isconnected to a PC, you can only make
changes to the Color Tone, Size and HDMI Black Level.
[] Color Tone (Cool / Standard / Warm1 / Warm2): Cool makes
the picture bluer (cooler). Warm 1 and Warm 2 make the picture
redder (warmer).
'_' Warm1 and Warm2 are deactivated when the picture
mode is set to Dynamic.
[] Size: Set the size and aspect ratio of the picture on the screen.
Your cable box or satellite receiver may have its own set of
screen sizes as well. However, we highly recommend you use
the TVs 16:9 mode most of the time.
16:9: Sets the picture to the 16:9 wide screen format.
Zoom1 : Provides moderate magnification of the picture. Sides,
top, and bottom are cut off.
Zoom2: Provides larger magnification of the picture. Sides, top,
and bottom are cut off.
Wide Fit: Enlarges the aspect ratio of the picture so the picture
fits the entire screen.
4:3: Sets the picture to the old, 4:3 format and puts black or gray
borders on the right and left of the picture.
'_' Do notwatch your TV inthe 4:3 format for a long time.
Traces of borders displayed on the left, right and center of
the screen may cause image retention (screen burn) which
is not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when
your TV isinputting HDMI (720p / 1080i / 1080p) or Component
(1080i/1080p) HD signals.
_' HD (High Definition) has a 16:9 aspect ratio and 1080i/1080p
(1920x1080) or 720p (1280x720) resolution.
_' You can adjust and store settings for each external device you
have connected to an input on the TV. Picture Sizes available
by Input Source are listed below:
_2_
A VAVComponent/ 0, 1'
DTV(1080i, 1080p), Component (1080i, 1080p), 16:9, Wide Fit,
HDMI (720p, 1080i, 1080p) 4:3, Screen F t
[] Digital Noise Filter (Off / Low / Medium / High / Auto) : Ifthe
broadcast signal received by your TV isweak, you can activate
the Digital Noise Filter feature to reduce any static and ghosting
that may appear on the screen.
'_' When the signal isweak, try all the Digital Noise Filter
options until the TV displays the best picture.
[] HDMI Black Level (Normal / Low) : For HDMI signals, select
the black level to adjust the screen depth. Los! make blacks look
darker.
_' Available only in HDMI mode (RGB signals).
[] Film Mode (Off / Auto) : Sets the TV to automatically sense and
process film signals from all sources and adjusts the picture for
optimum quality.
_' Available in ATV, DTV (interlace), AV, COMPONENT (480i /
1080i) and HDMI (480i/1080i).
[] LED Motion Plus (Off/On): Removes drag from fast scenes
with a lot of movement to provide aclear picture.
Picture Reset
[] Picture Reset (Reset Picture Mode/Cancel): Resets tile
picture settings to theirfactory defaults.
Mode
[] Standard: Selects the normal sound mode.
[] Music: Emphasizes music over voices.
[] Movie: Provides the best sound for movies.
[] Clear Voice: Emphasizes voices over other sounds.
[] Amplify: Increase the intensity of high-frequency sounds to allow
a better listening experience for the hearing impaired.
Equalizer
Available inStandard sound mode only.
[] Balance L/R: Adjusts the balance between the right and left
speaker.
[] 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth
Adjustment): Adjusts the loudness of specific bandwidth
frequencies.
[] Reset: Resets the equalizer to itsdefault settings.
SRS TruSurround HD (On/Off)
Available inStandard sound mode only.
SRS TruSurround HD is a patented SRS technology that solves
the problem of playing 5.1 multichannel content through two
speakers. TruSurround delivers a compelling, virtual surround
sound experience through any two-speaker playback system,
including internal television speakers. It isfully compatible with all
multichannel formats.
Preferred Language
Digital channels only.
DigitaI-TV broadcasts can transmit many audio tracks
simultaneously (for example, simultaneous translations of a program
into foreign languages).
'_' You can only select a language from among the ones being
broadcast.
Multi-Track Sound (MTS)
Analog channels only.
[] Mono: Select for ctqannels that are broadcasting in mono or if
you are having difficulty receiving a stereo signal.
[] Stereo: Select for ctqannelsthat are broadcasting in stereo.
[] SAP: Select to listen to the Separate Audio Program, wtqich is
usually a foreign-language translation.
'_' Depending on the program being broadcast, you can listen to
Mono, Stereo or SAP.
Auto Volume
Because each station has its own broadcasting conditions, the
volume may fluctuate each time you change the channel. This
feature automatically adjusts the volume of a channel by lowering
the sound output when the modulation signal is high or by raising
the sound output when the modulation signal is low.
SPDIF Output
The SPDIF (Sony Philips Digital InterFace)outputs an
uncompressed digital audio signal when you connect the digital
audio jack on the back of the TV to a digital audio in jack on a
receiver or home theater.
[] Audio Format (POM/Dolby Digital): You can select the Digital
Audio output (SPDIF)format. The available Digital Audio output
format may differ depending on the input source.
_. By connecting the TV to a receiver or home theater with
Dolby Digital and 5.1ch speakers and selecting Dolby
Digital, you can maximize your interactive 3D sound
experience.
[] Audio Delay: Lets you correct timing mismatches between the
audio track and the video when you arewatching the TV and
listening to digital audio output from the TV through an external
device such as an AV receiver. When you select Audio Delay, a
slider appears. Use the left and right arrow buttons to adjust the
slider. Press ENTER _ when done (0ms _ 250ms).
Speaker Settings
[] Speaker Select (External Speaker / TV Speaker)
If you are listening to the sound track of a broadcast or movie
through an external receiver, you may hear a sound echo caused
by the difference in decoding speed between the -[V's speakers
and the speakers attached to your audio receiver. If this occurs,
set the TV to External Speaker.
'_' When you set Speaker Select to External Speaker, the
TV's speakers are turned off. Youwill hear sound through
the external speakers only. When you set Speaker Select
to TV Speaker both the TV's speakers and the external
speakers are on. You will hear sound through both.
'_' When Speaker Select is set to External Speaker, the
VOLUME and MUTE buttons will not operate and the
sound settings will be limited.
'_' If there is novideo signal, both the TV's speakers and the
external speakers will be mute.
Sound Reset
[] Reset All: Resets all sound settings to the factory defaults.
_3_
_3 Memorizing Channels
When you first set up your TV using Plug & Play, the TV memorized
the channels that were available over the airor through your cable
system and added them to the Channel List. The Antenna and
Auto program functions described below let you re-run the channel
memorization function without having to re-run the Plug & Play
procedure.
Antenna (Air/ Cable)
Before your television can memorize the available channels, you
must select your TV's signal source, Air (using an antenna) or Cable.
Select Menu >Channel > Antenna > Air or Cable. After you have
selected the signal source, go on to the Auto Program function.
'_' Selecting the signal source using the Antenna function also
determines the signal source the TV is tuned to. For example,
ifyou receive your TV signal over the air,and you select Cable,
you will see only snow. You must select Air to see a picture.
Auto Program
The Auto Program function memorizes all channels that are
available over the air or through your cable system and adds them to
the Channel List.
Tostart Auto Program, follow these steps:
1. Push MENUiTrl _ Channel _ Auto Program _ ENTER_ on
your remote. The Antenna Source screen appears.
2. On theAntenna Source screen, select ttqesource of your TV
signal.
Air
If your TV is connected to an antenna ctqooseAir, and then press
ENTER _. The TVwill automatically start memorizing ctqannels.
Cable
If your TV is connected to a cable outlet, choose Cable, and then
press ENTER _. Go to Step 3.
Auto
If you choose Auto, and then press ENTER _, the TV will
automatically select the correct Antenna source. Go to
Step 3,
3. On the Cable Type screen, use the _Ii/_-/A/T buttons to select
the type of digital and analog cable systems you have: STD, HRC,
or IRC. Most systems are STD (Standard). When done, select
Start, and then press ENTER _. The TV willstart memorizing
channels.
'_' Channel memorization can take up to 45 minutes, depending
on your cable system.
'_' Memorized channels are added to the Added Channels
list. These are the channels you will see when you use the
Channel buttons on your remote.
Clear Scrambled Channel
This function filters out scrambled channels after Auto Program is
completed. This process may take up to 20_30 minutes.
'_' Press the ENTER_ button to stop the Clear Scrambled
Channel.
'_' This function is only available in Cable mode.
_3Managing Channels
Channel List
See your list of Added channels, Favorite channels, or channels
you've scheduled for viewing. Add or delete Favorite channels, add
or delete channels from theAdded Channels list, schedule channels
or programs for viewing. Watch achannel by selecting the channel
in the All Channels, Added Channels, or Favorite screen, pressing
the A / T buttons, and then pressing the ENTER_ button.
Channel List Screens icons are listed on the left side. Select an
icon using the _/T buttons to view each list.
[] _ All Channels: Shows all currently available channels including
[] _ Added Channels: Shows all Added Channels. These are the
channels that appear when you press the CH button.
[] _ Favorite: Shows all favorite channels.
[] _ Programmed: Shows all channels and programs currently
'_' Remote control buttons active on the Channel List screen.
° Green (Zoom): Enlarges or shrinks a channel number.
° Yellow (Select): Move the cursor to a channel. Press the Yellow
button to select the channel. A -,/ mark appears. Repeat to select
additional channels. Then, open the Tools menu and apply a
function to the channels you selected.
o r] (Tools): Displays the Channel List Tools menu. (The Tools
menus may differ depending on the situation.)
Display Icons Used in the Channel List Screens
those you deleted from the Added Channels
list.
scheduled using Timer Viewing.
_3The Channe_ List Tools Menu
The Channel List [bols menu contains most of the functioRS you
can use on the All Channel, Added Channels, and Favorite List
screens. '[b view, select a list screen, select a channel, and then
press the TOOLS button.
[] Add / Delete: Delete achannel from or add a channel to the
Added Channels list.
To delete channels from ttqeAdded Channels list, follow these steps:
1. Select one or more channels in the Added Channels list using
ttqe _/_' buttons and the Yellow Select button onyour remote.
2. Press the TOOLS button on your remote. The Tools menu
appears.
3. Select Delete in the Tools menu, and ttqen press ttqe ENTER
button.
_4_
To add channels to the Added Channels list, follow these steps:
1. Select one or more channels in the All Channels list using the
A/T buttons and the Yellow Select button on your remote.
2. Press the TOOLS button on your remote. The Tools menu
appears.
3. Select Add in the Tools menu, and then press the ENTER
button.
'_' All deleted channels will be shown on the All Channels list.
You add channels back to the Added Channels list on the
All Channels list.
'_' A gray-colored channel indicates the channel has been
deleted from the Added Channels list.
'_' The Add menu option only appears for deleted channels.
[] Add to Favorite/Delete from Favorite: Lets you add channels
to and delete channels from your Favorites list.
To add channels to the Favorites list, follow these steps:
1. Select one or more ctqannels inthe All Channels list using the [] Select All: Select all the ctqannels in the displayed ctqannel list.
A/T buttons and the Yellow Select button on your remote.
2. Press the TOOLS button on your remote. The Tools menu
appears.
3. Select Add to Favorite in the Tools menu, and then press the
ENTER _ button.
To delete channels from the Favorites list, follow these steps:
1. Select one or more channels in the Favorite Channels list
using the A/_" buttons and the Yellow Select button on your
remote.
2. Press the TOOLS button on your remote. The Tools menu
appears.
3. Select Delete from Favorite in the Tools menu, and then
press the ENTER _ button.
[] Timer Viewing: You can schedule a channel to be displayed
automatically at a set time, even when you are watching another
channel. You must set the current timefirst in the Time > Clock
function to use Time Viewing.
To schedule a channel, follow these steps:
1. Select a channel in the Added Channels list using the A/T
buttons and the Yellow Select button on your remote.
2. Press the TOOLS button on your remote. The Tools menu
appears.
3. Select Time Viewing in theTools menu, and then press the
ENTER_ button. The Time Viewing screen appears.
4. Use the _/_- buttons to move from entry field to entry field
and the A/_' buttons to change the entries. Where numbers
are displayed, you can also enter numbers directly using the
number keypad onyour remote.
'_' Ifyou select Everyday or Every Week, the date you
select in the Datefield becomes the start date for your
scheduled viewing. For Everyday, the TV will turn on
every day, at the time you selected, starting from that
date. For Everyweek, the TV will turn on every week,
on the same day of the week as the start date you
selected, at the time you selected, from that day on. If
you select Once, the TV will turn on once, on the date
and time you selected.
5. Press the ENTER _ button on your remote when done.
_' Only Added Channels can be scheduled.
_' Scheduled programs and channels are displayed in the
Programmed List.
'_' When you select a digital channel, press the _. button to
view the digital program list. If you highlight a program in
the list, and then press the ENTERS(Schedule) button,
you set Timer Viewing for that program directly.
[] Deselect All: Deselect allthe selected displayed channels.
'_' You can only select Deseleet All when one or more
channels are selected.
[] Channel Name Edit: Analog channels only. Lets you assign a
name of up to five characters to an analog channel. For example,
Hist, Food, Golf, etc. This makes iteasier to find and select a
channel.
[] Auto Program: See Auto Program under Memorizing Channels.
Programmed List (on the Channel List Screen)
The Programmed list displays the channels and programs you
have scheduled for viewing using the Time Viewing function. You
can view, modify, or delete a show you have scheduled using the
functions on the Programmed List screen Tools menu.
Programmed List Screen Tools Menu
[] Change Info: Change the scheduling information for a show or
channel you have scheduled.
Tochange the information, follow these steps:
1. Select the Programmed List icon on the left side of the
Channel List screen, and then press the ENTER _ button.
2. On the Programmed List screen, select the show or channel
entry you want to change, and then press the TOOLS button.
The Tools Menu appears.
3. Select Change Info, and then press the ENTER_ button.
The Time Viewing screen appears.
4. Use the _1i/_- buttons to move from entry field to entry field
and the A/_' buttons to change the entries. Where numbers
are displayed, you can also enter numbers directly using the
number keypad on your remote.
5. Press the ENTER _ button when done.
[] Cancel Schedules: Cancel a show or channel you have
scheduled.
Tocancel a scheduled show or channel, follow these steps:
1. Select the Programmed List icon on the left side of the
Channel List screen, and then press the ENTER _ button.
2. On the Programmed List screen, select the show or channel
entry you want to cancel, and then press the TOOLS button.
The Tools Menu appears.
3. Select Cancel Schedules, and then press the ENTER_
button. The Cancel Schedule screen appears.
4. Select OK, and then press the ENTER _ button.
_5_
[] Information: Display the information for a show or channel you
have scheduled. You can also change the schedule Information.
1. Select the Programmed List icon on the Idt side of the
Channel List screen, and then press the ENTER _ button.
2. On the Programmed List screen, select the show or channel
entry you want information for, and then press the TOOLS
button. The Tools Menu appears.
3. Select Information, and then press the ENTER_ button.
The Time Viewing Information screen appears.
4. Select Change Info and press the ENTER _ button
to change information, or select Close and press the
ENTER _ button to close the Information screen.
[] Select All / Deselect All: You can select or deselect all
channels in the channel list.
_3Other Channel Menu Functions
Channel Mode (Added Channels/Favorite
Channels)
Lets you select the channel list displayed when you press the
ACHV (Channel) button on your remote. For example, if you
select Favorite Channels, you will only see Favorite channels when
you press the ACHV button.
Fine Tune
Analog channels only.
If the reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store
operation. Ifthe signal isweak or distorted, fine tune the channel
manually.
'_' Select the channel, and then select Fine Tune.
'_' Fine tuned channels that have been saved are marked with
an asterisk "*" on the right-hand side of the channel number
in the channel banner.
'_' To reset fine-tuning, select the channel, select Fine Tune, and
then select Reset on the Fine Tune screen.
Plug & Play
Lets you re-run the Plug & Play initialsetup procedure. For
instructions, see your Quick Start Guide.
Language
Set the menu language.
_' Choose between English, Espa6ol, and Francais.
_3Setting the Time
Time
'_' The time you set will appear when you press the INFO
button.
[] Clock: Set the clock so you can use the various timer features
of the T_
'_' If you disconnect the power cord, you have to set the
clock again.
To set the clock, follow these steps:
1. Select Setup >Time > Clock.
2. Press ENTER_ and select Auto or Manual, and then press
ENTER _ again.
If you selected Auto:
The TV will automatically download the correct time from a
digital channel.
- Select Time Zone, and then press the ENTER _ button.
Use theA/_" buttons to select your Time Zone, and then
press ENTER _.
- Select DST (Daylight Savings Time), and then press
ENTER _. Select On ifyou want to turn the DST
adjustment on and off manually. Select Off to turn off the
DST adjustment. Select Auto ifyou want the TVto adjust
to DST automatically. Press ENTER_ when done.
_' DST and Time Zone function are only available when
the Clock Mode is set to Auto.
If you selected Manual:
The Clock Set screen appears. Use the A/_" buttons to
change the values in each field or usethe number buttons to
enter the values directly. Use the _/_- buttons to move from
field to field. When done with allthe fields, press ENTER _.
'_' Available only when Clock Mode is set to Manual.
[] Sleep Timer
Automatically shuts off theTV after a preset period of time. (30,
60, 90, 120, 150 and 180 minutes).
'_' To cancel the Sleep Timer, select Off.
Timer 1 / Timer 2 / Timer 3
Turns the TV on and off automatically at times and days you
select. You can set three different on/off timer settings.
'_' You must set the clock first.
[] On Time / Off Time: Set the hour, minute, am/pm, and
Activate/Inactivate fields for the On Time and Off Time. Use the
_1i/_ buttons to move from field to field. Use the A/_" buttons
to change the values ineach field. Toactivate the timer with
the setting you have chosen, set the Activate/Inactivate field to
Activate.
[] Volume: Set the desired loudness.
[] Contents: Toselect what will be turned on when the timer
setting is activated. Youcan set the TVto turn on a specific
channel or play back contents such as photo or audio files.
Use the _1i/_-buttons to move to move to the Contents field,
and then press the ENTER_ button. The Contents screen
appears. Use the _1i/_ buttons to move from field to field. Use
the _/_r buttons to change the values ineach field.
- TV/USB: Select "IV or USB. The USB device must be
connected to your TV before you can select USB.
- Antenna: Displays the current antenna source, Air or Cable.
- Channel: Ifyou have selected TV, select the desired channel.
- Music/Photo: Ifyou have selected USB, folios! these steps to
select a folder containing MP3 (Music) or JPEG (Photo) files on
the USB device:
_' The maximum displayed number of files, including sub
folders, in one folder of USB storage device is 2000.
'_' The media may not be playing smoothly when using the
device lower than USB 2.0.
1. Use the _/_. buttons to move to the field under Music
or the field under Photo, and then press the ENTER
button. The TV displays a single folder (the Root folder)
and the type or name of the device.
_6_
2. Press the ENTER_ button. A list of folders on the device
appears.
'_' If there are no folders on your device, press the
Yellow select button to select the Root folder, and
then press the RETURN button. The Timer screen
re-appears.
3. Use the &/T buttons to highlight a folder that contains
music or photos, and then press the Yellow select button
to select the folder.
4. Press the RETURN button. The Timer screen re-appears.
[] Repeat: Select Once, Everyday, Mon~Fri, Mort~Sat, Sat-Sun
or Manual. Ifyou select Manual, you can select the days you
want to activate the timer by using the _1i/_- buttons to highlight
the day, and then pressing the ENTER_ button. To unselect a
day, highlight it, and then press the ENTER_ button.
When you finished making allyour selections on the Timer screen,
press either the ENTER_ or RETURN button.
_3Other Features
Program Rating Lock
The Program Rating Lock feature lets you block programs
you've determined are inappropriatefor your children based on
the program's ratings. To access the Program Rating Lock
feature and make any changes, you must enter a PIN (personal
identification number). To watch a blocked program, you must also
enter the same PIN.
'_' Program Rating Lock is not available in HDMI or
Component mode.
'_' The default PIN number of anew TV set is "0-0-0-0". You can
set your own PIN using the Change PIN function.
How It Works
Wtqen you access ttqeProgram Rating Lock Menu functions for
the first time, the PIN input screen appears. Enter 0-0-0-0. The PIN
screen closes and ttqeProgram Rating Lock Menu appears. Every Caption
time you access the Program Rating Lock functions, the PIN
screen will appear and you must enter a PIN.
When the Rating Lock screen appears, select Program Rating
Lock, and then press ENTER _. Select On, and then press the
ENTER _ key again. Depending on what type of programs or
movies you want to block, select one of the options on the screen,
and then press the ENTER _ button. The options are listed below:
[] TV Parental Guidelines: You can block TV programs based
on their ratings. This function allows you to control what your
children arewatching.
[] MPAA Rating: You can block movies based on their MPAA
ratings. The Motion Picture Association of America (MPAA)has
implemented a rating system that provides parents or guardians
with advanced information on which films are appropriate for
children.
[] Canadian English: You can block TV programs based on their
Anglophone Canadian ratings.
[] Canadian French: You can block TV programs based on their
French Canadian ratings.
[] Downloadable U.S. Rating: Parental restriction information can
be used while watching DTV channels.
Locking/Blocking Programs or Movies
You lock or block programs and/or movies in essentially the same
way for each option. Each option displays a grid or table. All the
tables have ratings listed on the left. The TV Parental Guidelines
option also has kinds of content listed across the top: ALL: Lock all
TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation
/ L: Adult Language / D: Sexually Suggestive Dialog.
ToIocWblock movies or shows with certain ratings and/or kinds of
content, click the square next to the rating and/or under the kind of
content. A lock appears. TounlocWunblock, click the square again.
When you click a low rating, allthe ratings above itwill also display
locks. You can also Allow All or Lock All. When done, press the
RETURN button on your remote.
[] Change PIN: The Change PIN screen will appear. Choose any
4 digits for your PIN and enter them in Enter New PIN fields.
Re-enter the same 4 digits in Confirm New PIN fields. When the
Change PIN screen disappears, press the OK button. The TV
has memorized your new PIN.
'_' If you forget the PIN, press the remote-control buttons in
Game Mode (On/Off)
When you connect a game console such asa PlayStation TM
or XboxTM to your T_, you can enjoy amore realistic gaming
experience by turning on the Game Mode function.
'_' Precautions and limitations for game mode:
* Beforeyou disconnect the game console and connect another
external device, set Game Mode to Off in the setup menu.
* Ifyou display theTV menu in Game Mode, the screen shakes
slightly.
'_' Game Mode is not available when the input source is set to
TV.
'_' After connecting the game console, set Game Mode to On.
You may notice slightly reduced picture quality.
(On-Screen Text Dialogue)
[] Caption: You can switch the caption function on or off. If
captions are not available, they will not be displayed on the
screen.
'_' The Caption feature does not work in Component or
[] Caption Mode: You can select the desired caption mode.
Default / OO1~004 / Text1 ~Text4: (analog channels only) The
Analog Caption function operates in either analog TV channel
mode or when a signal is supplied from an external device to the
TV. (Depending on the broadcasting signal, the Analog Caption
function may or may not work with digital channels.)
Default / Service1 ~Service6 / OO1~004 / Text1 ~Text4:
(Digital channels only) The Digital Captions function works with
digital channels.
'_' Service1~6 may not be available in digital caption mode
[] Digital Caption Options: (Digital channels only)
Size: Options include Default, Small, Standard and Large. The
default is Standard.
Font Style: Options include Default and Styles 0 to 7. The
default is Style 0.
Foreground Color: Options include Default, White, Black, Red,
Green, Blue, Yellow, Magenta and Cyan. Youcan change the
color of the letters. The default is White.
_7_
the following sequence, which resets the pin to "0-0-0-0" :
POWER (off) _ MUTE _ 8 _ 2 _ 4 _ POWER (on)
HDMI mode.
depending on the broadcast.
Background Color: Options include Default, White, Black, Red,
Green, Blue, Yellow, Magenta and Cyan. You can change the
background color of the captions. The default is Black.
Foreground Opacity: This adjusts the opacity of text. Options
include Default, Transparent, Translucent, Solid and Flashing.
Background Opacity: This adjusts the opacity of the caption
background. Options include Default, Transparent, Translucent,
Solid and Flashing.
Return to Default: This option sets each Size, Font Style,
Foreground Color, Background Color, Foreground Opacity and
Background Opacity to its default.
'_' Digital Caption Options are available only when you can
select Default and Service1 ~ Service6 in Caption Mode.
'_' The Foreground and Background cannot be set to the
same color.
Melody
Set so that a melody plays when the TV isturned on or off.
'_' The Melody does not play:
° When no sound is output from the TV because the MUTE
button has been pressed.
° When no sound is output from the TV because the volume has
been reduced to minimumwith the VOL .- button.
° When the TV is turned off by Sleep Timer function.
Auto Protection Time
[] Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10
hours): If the screen remains idlewith a still image for a certain
period of time you define, the screen saver is activated to prevent
the formation of ghost images on the screen.
Eco Solution
[] Energy Saving (Off / Low / Medium / High / Picture Off) :
This adjust the brightness of the TV inorder to reduce power
consumption. If you select Picture Off, the screen isturned
off, but the sound remains on. Press any button except volume
button to turn on the screen.
[] Eco Sensor (Off / On)To enhance your
power savings; the picture settings willautomatically adapt to the
light in the room.
'_' If you adjust the Backlight, the Eco Sensor will be set to
Off.
Min. Backlight: When Eco Sensor is On, the minimum screen
brightness can be adjusted manually.
'_' If Eco Sensor is On, the display brightness may change
(become slightly darker in most cases) depending on the
surrounding light intensity.
[] No Signal Power Off (Off / 15 rain. / 30 min. / 60 min.): Sets
how quickly the TV switches to standby mode, if no picture is
being received.
'_' Disabled when the PC is in power saving mode.
[] Auto Power Off (Off / On): The TVwill be automatically turned
off when no user operation is received for 4 hours.
Self Diagnosis
[] Picture Test: Use to check for picture problems. Ifthe problem
appears in the test picture, select Yes and follow the directions
on the screen.
[] Sound Test: Use the built-in melody sound to check for sound
problems. If the problem occurs during the test, select Yesand
follow the directions on the screen.
[] Signal Strength: (Digital channels only) An HD channel's
reception quality iseither perfect or the channels are unavailable.
Adjust your antenna to increase signal strength.
[] Reset: Reset all settings to the factory defaults.
'_ The PIN input screen appears before the setup screen.
'_' Enter your 4-digit PIN. Change the PIN using the Change
PIN option.
Software Upgrade
Software Upgrade can be performed by downloading the latest
firmware from samsung.com to aUSB memory device.
HD Connection Guide
Refer to this informationwhen connecting external devices to the
TV.
Contact Samsung
Vies! this informationwhen your TV does not work properly or
when you want to upgrade the software. You can find information
regarding our call centers and how to download products and
software.
Enjoy ptqotos, music and/or movie files saved on a
USB Mass Storage Class (MSC)device.
_3Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing photo, music, and/or movie
files to the USB jack on the back of the TV.A pop up window
appears.
3. Press the MED_A.P button on your remote. The Media Play
menu appears.
_3Using the Media Play Menu
To open Media Play in the Menu, follow these steps:
1. Press the MENU button. Then, press the A or _' button to
select Application on the left, and then press the ENTER
button.
2. Press the A or T button to select Media Play (USB), and then
press the ENTER_ button.
3. Press the _ or _- button to select an icon (Videos, Music,
Photos, Settings), and then press the ENTER _ button.
=_ Media Play might not work properly witt_ unlicensed
multimedia files.
'_' Need-to-Know List before using Media Play (USB)
° The file system supports FAT16,FAT32and NTFS.
° Certain types of USB Digital camera and audio devices may not
be compatible with this TV.
° Media Play only supports USB Mass Storage Class (MSC)
devices. MSC isa MassStorage Class Bulk-Only Transport
device. Examples of MSC are Thumb drives and Flash Card
Readers. Devices should be connected directly to the TV's USB
port. USB HDD is not supported.
![](/html/6c/6c87/6c87f2013ba19eae7f76da81ba4880ac309262622eb2287ac6a30320c16c588c/bg2.png)
" Before connecting your device to the TV, please back up your
files to prevent them from damage or loss of data. SAMSUNG is
not responsible for any data file damage or data loss.
" A USB device that requires high power (more than 0.bA) may not
be supported.
" Do not disconneet the USB device while it is loading.
" The higher the resolution of the image, the longer it takes to
display on the screen.
" The maximum supported JPEG resolution is 15360 x 8640 pixels.
" If a file is corrupted or the TV does not support the file type, the
"Not Supported File Format" message appears.
" The TV cannot play MP3 files with DRM that have been
downloaded from a for-pay site. Digital Rights Management
(DRM) is a technology that supports the creation, distribution,
and management of digital content in an integrated and
comprehensive way, including protecting the rights and interests
of content providers, preventing illegal copying of contents, and
managing billing and settlements.
" PTP devices are not supported.
" If an over-power warning message is displayed while you are
connecting or using a USB device, the device may not be
recognized or may malfunction.
" If the TV has no input during the time period set in Auto
Protection Time, the Screensaver will run.
" The power-saving mode of some external hard disk drives may
be released automatically when your connect them to the TV.
" If you use a USB extension cable, the TV may not recognize the
USB device or may not be able to read the files on the device.
" If a USB device connected to the TV is nat recognized, the list of
files on tbe device is corrupted, or a file in the list is not played,
connect the USB device to a PC, format the device, and check
the connection.
° Ifa file you deleted from the PC is still found when you run Media
Play, use the "Empty the Recycle Bin" function on the PC to
permanently delete the file.
° Photos only supports the sequential jpeg format.
° The Videos option does not support the scene search and
thumbnail functions.
° Ifthe number of files and folders saved on a USB storage device is
over approximately 4000, the files and folders may not appear and
some folders may not open.
° The maximum displayed number of files, including sub folders, in
one folder of USB storage device is 2000.
° The media may not be playing smoathly when using the device
lower than USB 2.0.
Videos
1. Inthe Media Play menu, press the 4 or _ button to select
Videos, and then press the ENTER _ button.
2. Press the _l/l_/A/_" buttons to select a video in the file list.
3. Press the ENTER _ button or [_ (Play) button.
The file name is displayed on the top of the screen with the
playing time.
Ifvideo time information is unknown, playing time and the
progress bar are not displayed.
During video playback, you can search using the _1and
buttons.
'_' In this mode, you can play movie clips contained in a game,
but you cannot play the game itself.
'_ Supported Subtitle Formats
External
MPEG4 timedtext
SubViewer
MicroDVD
SubStationAlpha
AdvancedSubStationAlpha
Intemal
Xsub AVI PictureFormat
SubStationAlpha MKV TextFormat
AdvancedSubStationAlpha MKV TextFormat
SubRip MKV TextFormat
MPEG4Timed text MP4 TextFormat
._Supported Video Formats
3 11/4x/5 1 1920x1080 6-30 30Mbps
*mp4 MP4
3 11/4x/5 1 1920x1080 6-_30 30Mbps MP3/
*avi AVI,
*mkv MKV
ASF
*,ts
TS
*m2ts
*dat
*mpg PS MPEG2
*mpeg H. 264 BP
*rob
*3gp 3GPP / ASP
*fly flash
*swf formats Sorenso_l
-9-
iii_iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!iii__iiii_iii_:_i___]__%%iii%iiiiiiii!ilil;l¸i!iiiiiii
SAMI
SubRip
DivX
/60
H264 1920x1080 6-30 8OMbps ADPOM/
Ave 1920x1080 6-30 3OMbps
MJPEG 640x480 6-_30 10Mbps
DivX
/60 AC3 /
MPEG4 SP LPCM /
DivX 3 11 MP3 /
MPEG4 SP
H. 264 BP MP3 /
/MP/HP
/MP/HP
MPEG4 SP
1920x1080 6-_30 3OMbps ADPCM
/ASP
H264 1920x1080 6-_30 3OMbps Core
MJPEG 640x480 6-_30 1OMbps
/ 4x/5.1 1920x1080 6-_30 3OMbps AC3 /
/ 60 LPCM /
1920x1080 6-_30 3OMbps /WMA
/ASP
H,264 1920x1080 6-_30 3OMbps Pro
MPEG2 1920x1080 6-_30 3OMbps AC3/
1920x1080 6-_30 3OMbps DD+ /
MPEG1
1920x1080 24/25/30 30Mbps AC3/
1920x1080 24/25/30 3OMbps MPEG /
1920x1080 6-_30 3OMbps AAC
1920x1080 6_30 30Mbps
H,264
1920x1080 6_30 30Mbps
H,264
1920x1080 6_30 3OMbps
1920x1080 6_30 3OMbps
H,263
,ttxt
sml
srt
sub
sub ortxt
ssa
ass
MP3/
AAC
/ DTS
ADPCM
/ WMA
AAC /
HE AAC
LPCM /
MP3
MP3
Other Restrictions Photos
Video content will not play, or not play correctly, ifthere is an
error inthe content or the container.
Sound or video may not work if the contents have a standard
bit rate/frame rate above the compatible Frame/sec listed inthe
Supported Video Formats table.
Ifthe IndexTable erroneous, the Seek (Jump) function is not
supported.
The menu may take longer to appear if the video's bit rate
exceeds 10Mbps.
Video content can not be played if there are many contents in
one file. 1. Inthe Media Play menu, press the _ or 1_ button to select
Photos, then press the ENTER _ button.
Supports up to H.264, Level 4.1
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are
not supported.
MPEG4 SP,ASP :
- Below 1280 x 720:60 frame max
- Above 1280 x 720:30 frame max
H.263 is not supported.
GMC is not support.
Music
2. Pressthe _li/_-/A/_" buttonsto select a pt_oto in thefile list.
3. Press the ENTER _ button or [_ (Play) button.
_' NOTE
* While a photo list is displayed, press the [_ (Play) / ENTER_
button on the remote control to start a slide show.
* All files in the file list section will be displayed in the slide show.
* During the slide show, files are displayed in order.
* During the slide show, you can adjust the slide show speed
using ([_) (REW) or ([_) (FF) button.
* You can move to other files using _ or _- button.
JPEG
Base-line
Progressive
15360 x 8704
1024 x 768
Other Restrictions
CMYK, YCCK Color space JPEG are nat supported.
Playing Multiple Files
Playing selected video/music/photo files
1. On the File List screen, highlight a file, and then press the Yellow
button on your remote.
1. In the Media Play menu, press the _lior _ button to select
Music, and then press the ENTER _ button.
2. Press the _/_/A/T buttons to select the desired Music inthe
file list.
3. Press the ENTER _ button or _ (Play)button.
'_' During music playback, you can search using the _ and
_- button.
_' [_ (REW) and [_ (FF)buttons do not function during
play.
_' Media Play only displays files with MP3 and PCM file
extension. Other file extensions are not displayed, even ifthey
are saved on the same USB device.
_' If the sound is abnormal when playing MP3 files, adjust the
Equalizer in the Sound menu. (An over-modulated MP3 file
may cause a sound problem.)
2. Repeat Step 1 to select multiple files.
_' NOTE
* A _/mark appears to the left of the selected files.
* To cancel a selection, press the Yellow button again.
* To deselect all selected files, press the TOOLS button, select
Deselect All, and then the ENTER _ button.
3. Press the TOOLS button, select Play Selected Contents, and
then press the ENTER _ button.
Playing a video/music/photo folder
1. With the folders on your USB device displayed, use the
_/1_/&/_r buttons to highlight a folder.
2. Press the TOOLS button, select Play Folder, and then press the
ENTER_ button.
-10-
Media Play - Additional Functions
[] Videos/Music/Photos Play Option menus
Widen playing a file, press the TOOLS button.
Title Io play directS/.
Repeat Mode ifiles repeatedly.
Picture Size iYou can adjust the picture size to
Picture Mode iYou can adjust the picture setting.
Sound Mode iYou can adjust the sound setting.
Subtitle Subtitles. This function only works
Setting f the subtitles have the same file
Audio Format You can select the digital audio
Audio iYou can change the audio
Language ithan one language.
Stop Slide
Show / You can start or stop a Slide
Start Slide Show.
Show
Slide Show You can select the slide show
Speed speed during the slide show. ,7
Background background music when ,7
Music iwatching a Slide Show.
Zoom You can zoom into images in full
Rotate screen mode. ,7
information You can see detailed information
You can select another video file
iYou can play movie and music
your preference.
iYoucan play the video with
dame as the video.
autput format.
ilanguage ifthe video has more
You can set and select
screen mode. ,7
You can rotate images in full
iabout the played file. ,7 ,7 ,7
`7
-,/ ,,Z
`7
`7 `7
`7 ,,Z `7
`7
`7
`7
Settings
Using the Setup Menu
[] DivX® Video On Demand : Shows the registration code
authorized for the -IV. If you connect to the DivX web site and
register with the 10-digit registration code, you can download
the VOD activation file. Once you play it using Media Play, the
registration is completed.
'_' For more information on DivX® VOD, visit "http://vod.divx.
corn".
[] Information: Select to view informationabout the connected
USB device.
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on
the wall.
For detailed information about installing the wall mount, see
the instructions provided with the wall mount items. Contact a
technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the
product or injury to yourself or others if you elect to install the wall
mount on your own.
Wall Mount Kit Specifications (VESA)
'_' The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the floor.
When attaching to other building materials, please contact your
nearest dealer. If you install the TV on a ceiling or slanted wall, it
may fall and result in severe personal injury.
'_' NOTE
° Standard dimensions for wall mount kits are shown in the table
below.
* When purchasing our wall mount kit, a detailed installation
manual and all parts necessary for assembly are provided.
* Do not use screws that do not comply with the VESA standard
screw specifications.
* Do not use screws that are longer than the standard dimension
or do not comply with the VESA standard screw specifications.
Screws that are too long may cause damage to the inside of the
TV set.
* For wall mounts that do not comply with the VESA standard
screw specifications, the length of the screws may differ
depending on the wall mount specifications.
* Do not fasten the screws too firmly. This may damage the
product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
* Samsung is not liable for product damage or personal injury
when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
* Do not mount the TV at more than a 15 degree tilt.
* Always have two people mount the TV on a wall.
`7
LED-%/
19_22 75 X 75
26 100X 100
32,_40 200 X 200 M6
46_60 400 X 400 M8
Do not install your Wall Mount Kit while
your
%/is turned It result in
personal injury due to electric shock.
on.
M4
Securing the TV to the Wall
Caution: Pulling, pushing, Or climbing onto the TV
may cause the TV to fall. In particular, ensure that you(
children do not hang over o_destabilize the, TV; doing so
may cause the _ to tip over, resulting in serious injuries
or death. Follow all safety precautions provided on the
included Safety Flyer, For added stability, install the aeti:
fall device for safety purposes, as follows.
To prevent the TV from falling
'_' Since the necessary brackets, screws, and string or cable are
not supplied, please purchase these separately.
1. hqsert the screws into the wall brackets and firmly fasten them to
the wall. Make sure tide screws are firmly fixed to the wall.
=z We strongly recommend you drive the screws into a stud.
2. Using screws, insert the screws through the TV brackets, and
then fasten the screws to the top VESA screw holes on the back
of the TV.
3. Connect the brackets on the TV and the brackets on the wall
with a strong string or cable, and then tie the string or cable
tightly to the brackets.
'_' Verify all connections are properly secured. Periodically check
the connections for any sign of fatigue or failure. If you have
any doubt about the security of your connections, contact a
professional installer.
'_ Install the TV close to the wall so that it does not fall.
'_' Connect the string or cable so that the brackets on the wall
are at the same height or lower than the brackets on the TV.
Untie the string or cable before moving the TV.
'_' To purchase a TV Holder kit, contact Samsung customer
care.
-11-
may
Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device
used to physically fix the system when using it in a public place.
Refer to the manual provided with the Kensington Lock for additional
information on proper use.
_s, Please find a "_" icon on the rear of the TV. The Kensington
slot is beside the "_" icon.
,s, The position and color may differ depending on the model.
Assembling the Cable manager
Display Modes (HDMI/DVI Input)
Optimal resolution
4000 series:1366 x 768@60Hz / 5000 series: 1920 x 1080@60Hz
640x 850 81489 7OO86 25175 +/ .Z
IBM
72Ox 4OO 81489 7OO87 28322 /+ .Z
640x 480 85000 66667 30240 / .Z
MAC
832 x 624 49726 74551 57284 / .Z
1152x870 68681 75062 100000 /
640x 480 81489 59940 25175 / .Z
640x 480 87881 728O9 31500 / .Z
640 x 48O 87500 75OOO 31 5OO / .Z
8OOx 60O 37879 60317 4OOOO +/+ .Z
800 x 600 48077 72188 5OOOO +/+ .Z
80O x 600 46875 75OOO 495OO +/+ .Z
1024 x 768 48863 6OOO4 65000 / .Z
1024 x 768 56478 7OO69 75OOO / .Z
1024 x 768 60023 75O29 7875O +/+ .Z
1152 x 864 67500 75000 108000 +/+
1280x 720 45OOO 6OOOO 7425O +/+ .Z
1280 x 800 49702 59810 83500 /+
1280 x 1024 63981 60020 108000 +/+
1280 x 1024 79978 75025 135000 +/+
1866 x 768 47712 5979O 855OO +/+ .Z
1440 x 900 55935 59887 106500 /+
1600 x 900RB 60000 60000 108000 +/+
1680 x 1050 65290 59954 146250 /+
1920 x 1080 67500 60000 148500 +/+
Troubleshootinq.
If the TV seems to have a problem, first review this list of possible problems and solution. If none of ttqese troubleshooting tips apply, visit
samsung.com, then click on Support, or call Samsung customer service at 1-800-SAMSUNG.
Flickering and Dimming Ifyour Samsung Television is flickering or dimming sporedical_/, you may need to disable some of itsenergy efficient
Component Connections / Ifyou find that the color on your Samsung television 'Sscreen is not correct or black and white, first run a Self
Screen Color Diagnosis Test onthe %/to make sure there are no device issues.
Screen Brightness Ifyou find that the colors on your Samsung %/are correct but just a littletoo dark or bright, there are some settings
Unwanted Powering off Ifyour Samsung %/appears to turn off by itself, there may be an issue with either your Timer settings or your Eco
features like the Eco Sensor or the Energy Saving feature. Follow the steps below with your remote to turn these
features off or on.
Energy saving : Menu _ Setup _ Eco Solution _ Energy Saving _Select Settings
Eco Sensor : Menu _ Setup _ Eco Solution _ Eco Sensor _Select Settings
Self Diagnosis : User Menu _ Support _ Self Diagnosis _ Picture Test
If the test is ok, try making sure ;
Your connections are all consistent. For example, ifyou've used the AV Injack on your %/, make sure you have
used the AV Out jack on your video source.
Try making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled
Pb, Pr, and Y,to connect your %/and video source, make sure you have connected the blue Pb jack on the
video source to the blue Pbjack on the %/, the red Pr jack on the source to the red Pr jack onthe %/.
you should check before calling for a repair.
Backlight, Contrast, Brightness, Sharpness, Color, Tint and so on. Go to "Picture" in the Menu, and then try
adjusting these options.
friendly No Signal Power Off feature.
First make sure the Sleep Timer is not accidentally set. The Sleep Timer letsyou fall asleep with the %/still on
knowing that it will turn off after acertain period of time and not waste energy.
Sleep Timer : User Menu _ Setup _ Time _ Sleep Timer
Ifthe Sleep Timer is not activated, you may have engaged the No Signal Power Off or Auto Power Off feature.
No Signal Power Off :User Menu _ Setup _ Eco Solution _ No Signal Power
Auto Power Off : User Menu _ Setup _ Eco Solution _ Auto Power Off
-12-
_z
_z
_z
_z
_z
_z
_z
_z
_z
_z
_z
_z
_z
_z
_z
_z
_z
_z
_z
_z
_z
_z
Trouble Powering On Before you turn the TV on, find the red light on the right or left bottom of your TV. Press the power on button
Stand Assembly • If you have any trouble assembling the stand, refer to "Install the Stand" in the Start Up or Stand Installation Guide.
Cannot find a channel • Remun Plug & Play or run Auto Program. (go to MENU - Channel - Auto Program)
Poor Picture Eirst, pedorm the Picture Test and to see if Y0ur TV is displaying the teet image Pr0Perly
The TV image does not look as good as • If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to
itdid in the store, deliver HD (high definition) picture quality.
The picture is distorted: macroblock • Compression of video contents may cause picture distortion, especial_/on fast moving pictures such as those in
error,small block, dots, p_xelLzation, sports and action movies.
Color iswrong or missing. • If you're using a component connection, make sure the component cables are connected to the correct jacks.
There ispoor color or brightness. • Adjust the Picture options inthe TV menu. (go to Picture Mode / Color / Brightness / Sharpness)
There isa dotted line onthe edge of • If the picture size is set to Screen Fit, change it to 16:9.
the screen. • Change the cable/satellite box resolution.
The picture is black and white. • If you are using an AV composite input, connect the video cable (yellow) to the Green jack of Component Input 1
When changing channels, the picture • If connected to a cable box, please try to reset it. (Reconnect the AC cord and wait until the cable box reboots. It
freezes or is distorted or delayed, may take up to 20 minutes)
Sound Problems Perform the Sound Test to confirm that your TV audio is properly operating.
There isno sound or the sound is too • Check the volume of the device (Cable/Sat Box, DVD, BIu-ray, etc.) connected to your TV.
low at maximum volume.
The picture is good, but there isno • Ifyou are using an external device, check the device's audio output option Ex. you may need to change your
sound, cable box's audio option to HDMI if the box is connected to your TV using an HDMI cable.
The speakers are making an • Check the cable connections. Make sure a video cable is not connected to an audio input.
inappropriate noise. • ForAntenna or Cable connections, check the signal information. A weak signal may cause sound distortion.
No Picture, No Video '
The TV will not turn on. • Make sure the AC power cord is securely plugged into the wall outlet and the TV.
The TV turns off automatically. • Ensure the Sleep Timer isset to Off in the Time menu.
on the TV or remote and the light should blink about 5 times before the TV turns on.
Ifyou find that you are having trouble powering on your Samsung television, there are a number of things to check it
before making a call to the service department.
• If you happen to be using the TV as a monitor and the stand-by light only blinks for a few seconds when you
press the power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key onyour
keyboard or move the mouse. Then try turning your TV on.
Ifyou're sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If
you have acable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting a
signal. To test the signal output of your cable or satellite box, press the guide or info button on the cable or satellite
box remote control. Ifthe screen displays the guide or info data, the problem is caused by the box.
_o to MENU : Support - Self Diagnosis = Pi#ture Test
Ifthe test image is properly displayed, the poor picture may be caused by the source or signal.
• Cable/Satellite subscribers: Try HD channels from the channel line up.
• Air/Cable Antenna connection: Try HD channels after running Auto Program.
=& Many HD channels broadcast up scaled SD (Standard Definition) content. The picture quality of up
scaled SD content is low.
Adjust the Cable/Set top box video output resolution to 1080i or 720p.
• A weak signal can cause picture distortion. This is not a TV problem.
• Mobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels.
Incorrect or loose connections may cause color problems or a blank screen.
• Adjust the Energy Saving option in the TV menu. (goto MENU - Setup - Eco Solution - Energy Saving )
• Try resetting the picture to the default picture settings. (go to MENU - Picture - Picture Reset)
on the TV.
• Set the output resolution of the cable box to 1080i or 720p.
(go t0 MENU : Support = Self Diagnosis t Sound Test)
Ifthe audio isOK, the sound problem may be caused by the source or signal.
• Reboot the connected device by reconnecting the device's power cable.
• Perform the Sound Test as explained above.
• Make sure the wall outlet isworking.
Try pressing the POWER button on the TV to make sure the problem is not the remote.
If the TV turns on, refer to 'Remote control does not work' below.
If your PC is connected to the T_,check your PC power settings.
• Make sure the AC power cord is plugged securely into the wall outlet and the TV.
• When you are watching TV connected to an antenna or cable connection, the TV will turn off after 10 - 15 minutes
ifthere is no signal.
-13- -14- -15- -16-
There isno picture/video. * Check the cable connections. (Remove and reconnect all cables connected to the TV and external devices).
RF (Cable/Antenna} Connection
The TV isnot receiving all channels. • Make sure the coaxial cable isconnected securely.
No Caption on digital channels. * Check the Caption Setup menu. Trychanging Caption Mode Service t to CCt.
The picture is distorted: macroblock, * Compression of video contents may cause picture distortion, especial_/on fast moving pictures such as those in
error, small block, dots, pixelLzation, sports and action movies.
Others
Purple/green rolling horizontal bars and * Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the set-
buzzing noise from the TV speakers with top-box has a grounding issue.Replace the Component video cables with an HDMI connection.
Component cable connection.
The picture will not display infull screen. * HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
The remote control does not work. • Replace the remote control's batteries. Mako sure you insert them with the polarity ( i/ ) correct.
The cable/set top box remote control * Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for
does not turn theTV on or off, or adjust the SAMSUNG TV code.
the volume.
A "Mode Not Supported" message * Check the supported resolution of the TV and adjust the external device's output resolution accordingly. Refer to
appears, resolution settings in this manual.
Caption on the TV menu is greyed out. * You cannot select Caption inthe TV menu when watching content from a device connected via HDMI or
There isa plastic smell from the TV. * Thissmell isnormal and will dissipate ina few days.
TV Signal Strength is unavailable in the * This function is one/available for digital channels received through anAntenna / RF/Coax connection.
Self Diagnosis Test menu.
TV is tilted to the right or left side. * Remove the stand base from the TV and reassemble it.
The Channel menu is grey out * The Channel menu is one/available when you select the TV source.
(unavailable).
Your settings are lost after 30 minutes or * If %/is inthe Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from
every time the %/is turned off. Store Demo mode to Home Use mode using the Plug & Play procedure. Press the SOURCE button to select
You have intermittent loss of audio or * Check the cable connections and reconnect them.
video. * Loss of audio orvideo can becaused by using overly rigid or thick cables. Make sure the cables are flexible
You see small particles when you look * This is part of the product's design and isnot adefect.
closely at the edge of the frame of
the %/.
POP (TV'S internal banner ad) appears • Select Home Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup).
on the screen.
Set your external device's (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV
input. For example, if an external device's output isHDMI, itshould be connected to an HDMI input on the TV.
Make sure your connected devices are powered on.
Be sure to select the correct input source by pressing the ,>OURCE button on the remote control.
Reboot the connected device by reconnecting the device's power cable.
Run Auto Program to add available channels to the channel list.
go to MENU - Channel - Auto program then select Auto and make sure the correct Cable TV signal type is set
inthe menu. There are 3 options. (STD, HRC and _RC)
Verify the antenna ispositioned correctly.
Some channels may not have caption data.
A weak signal can cause picture distortion. This is not aTV problem.
Black bars on the top and bottom appear when movies that have aspect ratios different from your TV play on the
TV.
Adjust the picture sLzeoption on your external device or change the TV to full screen.
Clean the transmission window located on the top of the remote control.
Try pointing the remote directly at the TV from 5,_6feet away.
Component.
Caption must be activated on the external device.
TV mode, go to MENU _ Setup _ Plug & Play _ ENTER E_.
enough for long term use. If mounting the %/to the wall, we recommend using cables with 90 degree
connectors.
'_' This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may
be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
'_' Watch these troubleshooting on video at www.samsung.com/spsn.
'_' Some functions and pictures shown in this manual are available on specific models only.
'_' You can keep your TV in optimum condition by upgrading itwith the latest firmware from the Samsung web site (samsung.com
Support _ Downloads). To upgrade, download the firmware to your computer, copy the firmware file to a USB memory stick,
insert the USB memory stick into the TV's USB slot, and then select Support > Software Upgrade in the TV's menu.
Storage and Maintenance
'_ If a sticker was attached to the TV screen, some debriS ca remain after/ou remove me sticker. Please clean it before watching
the TV.
'_ The exterior and screen of the product can ge_ scra_cned dunn j ;_ean_ng Be sure _o w De _ne exterior and scree_ careful y us=ng
a soft cloth to prevent scratches.
Do not spray water directly on[o [ne
product. Any liquid that goes intc ire
product may cause a failure fire. or
electric shock.
Clean the Droouct Wth a soft clom
dampened wl_n Ina smal amo_ _t of
water Do no_ use aflamma_ =e_cJ_u
[e.g. Denzene. [nlnners) or a cleaning
agent.
License
r__ _f,om_ trademarks of SRS Labs, no surround souno e_ .............. ,torn _ne IV's Du,,,-,r
TheaterSound TheaterSound technology is inooruora[ed under soeaKers, wme main[dining s[ead_ volume an(]
_l_!_._ DivX Certified® to pla} DivX® video uD to HD 1080u including premium comenr
HD
ABOUT DIVXVIDEO: DivX®is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This isan official DivX
Certified® device that plays DivX video. Visitdivx. corn for more information and software tools to convert your files into DivXvideos.
ABOUT DIVXVDEO-ON-DEMAND: This DivXCertified® device must be registered in order to play purchased DivX Video-on-
Demand (VOD) movies. To obtain your registration code, locate the DivXVOD section itsyour device setup menu. Go to vod. divx.
corn for more information on how to complete your registration. Covered by one or more of the following U.S. patents : 7,295,673;
7,460,668; 7,515,710; 7,519,274 DivX®, DivX Certified® and associated Iogos are trademarks of Rovi Corporation or itssubsidiaries
and areused under license.
DOLB¥
PULSE ]
@ _ worldwide patents issued & pending. DTS, the Symbol, & DTS and theSymbol together are registered
2.0+Digital Out trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product includessoftware. © DTS, Inc. All
_ _ _ The terms HDMI and HDMI High-Definition Multimedia later[ace, and the HDMI Logo are trademarks or
Open Source License Notice
Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com) Open Source License
Notice is written only English.
To send inquiries and requests for questions regarding open sources, contact Samsung via Email (ees.request@samsung.com).
I_ This product uses some software programs which are distributed under the independent JPEG Group.
ICU License - ICU 1.8.1 and later
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1995-2008 International Business Machines Corporation and othersAll rights resewed.
Permission is herebygranted, free of charge, to anyperson obtaining a copy of this software andassociated documentation files (the "Software"), to deal in the Software
without restriction, including without limitation the rights to use, copy, modify, merge,publish, distribute, and/or sell copies of the Software, and to permit persons to
whom the Software isfurnished to do so, provided that the above copyright notice(s)and this permission notice appear in all copies of the Software and that both the
above copyright notice(s)and this permission notice appear insupporting documentation.
THESOFTWARE ISPROVIDED"AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESSOR iMPLIED, INCLUDING BUT NOT LIMITED TOTHEWARRANTIES
OFMEROHANTABUTY, FITNESS FORA PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT
HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BELIABLE FORANY CLAIM, OR ANY SPECIAL INDIRECTOR CONSEQUENTIAL DAMAGES, OR ANY
DAMAGESWHATSOEVER RESULTING FROM LOSS OFUSE, DATAOR PROFITS, WHETHER INAN ACTION OF CONTRACT, NEGLIGENCE OR OTHERTORTIOUS
ACTION, ARISINGOUT OF OR iN CONNECTION WITH THE USEOR PERFORMANCEOFTHIS SOFTWARE.
Except as contained inthis notice, thename of a copyright holder shallnot be used in advertising or otherwise to promote the sale, use or other dealings in this Software
without priorwritten authorization of the copyright holder.
All trademarks and registered trademarks mentioned hereinarethe property of theirrespective owners.
TheaterSound, SRS and the @ s'_mDoI are SRS [T_ee.lerSour_d rM orovldes the mos_ immerslve
licence from SRS Labs, Inc. (_elwenng non [)ass and clear dialog
Manufactured under license from Dolby Laboratories. Dolby and tide double-D symbol are trademarks of
Dolby Laboratories.
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and
Rights Reserved.
[]
registered trademarks of HDMI Licensing LLC in the United States and other countries.
EnvironmentalConsiderations
bperafing Temperature
3perating Humidly
StorageTempera[ure
Storage Hurrllalff
DisplayResolution 1366x 768
Screen S_ze 26" Class 32" Class
(Diagonal) (26.0"measured diagonally) (31.5" measureddiagonalk/)
Sound
Output 5Wx 2 10Wx 2
24.2 X 3.6X 14.3 inches 29.0 X3.6 X 17.1inches 29.0 X 3.6 X 17.5 inches 34.1 x 3.6x 20.4 inches
Withstand 24.2 X 7.1 X 16.5 inches 29.0 X 7.5 X 19.4 inches 29.0 X 7.5 X 19.6 inches 34.1 x8.9x 22.6 inches
Weight
WJ[houtStand 9.2 Ibs(4.2 kg) 12.5 Ibs(5.7 kg) 13.0Ibs (5.9 kg) 17.6 Ibs (8.0 kg)
WithStand 10.3 Ibs (4.7 kg) 13.8 Ibs(6.3 kg) 14.5 Ibs (6.6 kg) 22.2 Ibs(10.1 kg)
Display Resolution
Screen S_ze
(Diagonal)
Sound
Output
Body
W_thstand
Weight
W_hout Stand
Wkh Stand
(615.1 X93.3 X 365.6 (ram)) (738.8 X 93.3X 436.7 (ram)) (738.3 X 93.2 X444.9 (mm)) (B66.5x 93.0 x 519.2 (ram))
(615.1X 180.7 X419.2 (ram)) (738.8 X 191.7X 493.3 (ram)) (738.3X 191.7 X 49B.2 (mm)) (866.5x 227.6 x 575.5 (ram))
40" Class 48" Class 50" Class
(40.O"measured diagonal_) (45.9"measured diagonal_) (49.5"measured diagonal_)
38.5 X 3.6 X 21.6 inches
(927.6 X 93.0 X 551.0 (ram))
38.5 X 8.9 X 23.8 inches
(927.6 X 227.6 X 606.5 (ram))
19.8 ]bs (9.0 kg)
24.2 Ibs(11.0 kg)
50°F to 104°F (10°Oto 40°0)
10%to 80%, non-condensing
-4°F to 113°F (-20°0 to 45°0 )
5% to 95%, non-condensing
1366x 768 1920x 1080
32" Class 37 _Class
(31.5" measureddiagonally} (37.0" measured diagonally)
1920x1080
10Wx2
41.7 X3.7 X 24.6inches
(1059.8X 94.3X 625.6 (ram))
41.7 X8.9 X 26.7inches
(1059.8X 227.6 X680.7 (ram))
27.5 Ibs (12.5 kg)
31.9 Ibs (14.5 kg)
44.7 X 3.7 X 28.3 inches
(1137.6 X 94.5 X 669.4 (ram))
44.7 X 8.9 X 2B.5 inches
(1137.6 X 227.6 X 725.0 (ram))
34.6 Ibs (15.7 kg)
40.3 Ibs (18.3 kg)
'_ Design and specifications are subject to change without prior notice.
'_ This device is a Class B digital apparatus.
'_ For information about the power required and more about power consumption, refer to the label attached to the product.
'_ Typical power consumption is measured according to Energy Star Program requirements for televisions.
Dispose unwanted electronics ttqrough an approved recycler. To find the nearest recycling location, go to our website: www.
samsung.com/recyclingdirect or call_ (877) 278-0799.
(Unit: inches)
UN26EH4000 / UN26EH4050 5.4 2.8 13.9 3.9 3.9
UN32EH4000 / UN32EH4050 7.4 1.9 18.9 7.8 7.8
UN32EH5000 / UN32EH5050 7.4 4.2 19.0 7.8 7.8
UN37EH5000 8.7 5.7 22.4 7.8 7.8
UN40EH5000 / UN40EH5050 9.6 6.2 24.1 7.8 7.8
UN46EH5000 / UN46EH5050 11.6 7.7 29.8 15.7 15.7
UN50EH5000 / UN50EH5050 / UN50EH5070 12.5 8.5 31.3 15.7 15.7
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing
installation of your TV. Not responsible for typographical or printed errors.
¢) 2012 Samsung Electronics America, Inc
3.6
3.4
3.4
5.1
5.8
5.2
6.7