SAMSUNG UN40D6400UF, UN46D6400UF, UN55D6400UF, UN40D6420UF, UN46D6420UF Service Manual

...

LED-TV

Chassis : U63A

Model : UN40D6400UF UN46D6400UF UN55D6400UF

UN40D6420UF UN46D6420UF UN55D6420UF

UN40D6450UF UN46D6450UF UN55D6450UF

SERVICE

UN32D6500VF UN40D6500VF UN46D6500VF UN55D6500VF

UN46D6900WF UN55D6900WF

Manual

TFT-LCD TV Contents

1. Precautions

2. Product specications

3. Disassembly and Reassembly

4. Troubleshooting

5. Wiring Diagram

UN**D6****F

Contents

1. Precautions .............................................................................................................. 1-1

1-1. Safety Precautions ......................................................................................................... 1-1

1-2. Servicing Precautions ..................................................................................................... 1-2

1-3. Electrostatically Sensitive Devices (ESD) Precautions .................................................. 1-2

1-4. Installation Precautions .................................................................................................. 1-3

2. Product specications ............................................................................................ 2-1

2-1. Specications Information .............................................................................................. 2-1

2-2. Detail Factory Option ...................................................................................................... 2-7

2-3. New Functions Explanation .......................................................................................... 2-10

2-4. Accessories .................................................................................................................. 2-24

3. Disassembly and Reassembly ............................................................................... 3-1

3-1. Disassembly and Reassembly ....................................................................................... 3-1

4. Troubleshooting ...................................................................................................... 4-1

4-1. Troubleshooting .............................................................................................................. 4-1

4-2. Fuction .......................................................................................................................... 4-27

4-3. Factory Mode Adjustments ........................................................................................... 4-28

4-4. Factory Data ................................................................................................................. 4-29

4-5. White Balance .............................................................................................................. 4-38

4-6. Software Upgrade ......................................................................................................... 4-40

4-7. RS-232C ....................................................................................................................... 4-41

4-8. AV control code ............................................................................................................. 4-42

4-9. Rear Cover Dimension ................................................................................................. 4-47

4-10. Compare 55 inch with Others ..................................................................................... 4-48

5. Wiring Diagram ........................................................................................................ 5-1

5-1. Wiring Diagram ............................................................................................................... 5-1

5-2. Connector ....................................................................................................................... 5-3

5-3. Connector Functions ...................................................................................................... 5-5

5-4. Cables ............................................................................................................................ 5-5

This Service Manual is a property of Samsung Electronics Co.,Ltd.

Any unauthorized use of Manual can be punished under applicable International and/or domestic law.

Printed in Korea

3. Disassembly and Reassemble

3. Disassembly and Reassembly

This section of the service manual describes the disassembly and reassembly procedures for the LED TV.

WARNING: This LED TV contains electrostatically sensitive devices. Use caution when handling these components.

3-1. Disassembly and Reassembly

Cautions: 1. Disconnect the LED TV from the power source before disassembly.

2. Follow these directions carefully; never use metal instruments to pry apart the cabinet.

Description Picture Description

Place TV face down on cushioned table.

Remove screws from the Stand.

Remove stand.

Remove the screws of Rear-Cover.

Screws

6001-002621

SCREW-MACHINE

(M4, L8-BLK)

Lift up and remove the rear-cover.

* Caution : Becareful when you lift up

the rear-cover, It’s really sharp.

6001-002671

SCREW-MACHINE

(M3, L6-BLK)

3-1

3-2

3. Disassembly and Reassemble

Description Picture Description

Remove the screws of Main Board.

* Notice : New type of LVDS connection.

applied to 11 year model. (Double locking)

Up the rst locking1. Push the second locking 2. and detach connection.

Remove the screws of IP Board. Remove the IP Board.

Screws

6001-002653

SCREW-MACHINE

(M3, L6-WHT)

Remove the Cover-Bottom.

Remove the screws of Stand-Link BLKT,

and remove Stand-Link BLKT.

6001-002653

SCREW-MACHINE

(M3, L6-WHT)

6001-002653

SCREW-MACHINE

(M3, L6-WHT)

3-3

3. Disassembly and Reassemble

Description Picture Description

Remove the Speakers. (R/L)

Remove the screws of T-con.

Unlock the locking of T-con cable.

Screws

6001-002653

SCREW-MACHINE

(M3, L6-WHT)

Reassembly procedures are in the reverse order of disassembly procedures. ※

Panel.

Front

1. Precautions

1-1. Safety Precautions

Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as electrical shock.

1-1-1. Warnings

For continued safety, do not attempt to modify the circuit board.1.

Disconnect the AC power and DC power jack before servicing.2.

1-1-2. Servicing the LED TV

When servicing the LED TV, Disconnect the AC line cord from the AC outlet.1.

It is essential that service technicians have an accurate voltage meter available at all times. 2. Check the calibration of this meter periodically.

1-1-3. Fire and Shock Hazard

Before returning the LED TV to the user, perform the following safety checks:

Inspect each lead dress to make certain that the leads are not pinched or that hardware is not lodged between the 1. chassis and other metal parts in the LED TV.

Inspect all protective devices such as nonmetallic control knobs, insulating materials, cabinet backs, adjustment and 2. compartment covers or shields, isolation resistorcapacitor networks, mechanical insulators, etc.

Leakage Current Hot Check (Figure 1-1): 3. WARNING : Do not use an isolation transformer during this test. Use a leakage current tester or a metering system that complies with American National Standards Institute (ANSI C101.1, Leakage Current for Appliances), and Underwriters Laboratories (UL Publication UL1410, 59.7).

(READING SHOULD) NOT BE ABOVE 0.5mA

DEVICE UNDER TEST

2-WIRE CORD

*ALSO TEST WITH

PLUG REVERSED (USING AC ADAPTER PLUG AS REQUIRED)

TEST ALL

EXPOSED METAL

SURFACES

LEAKAGE CURRENT TESTER

EARTH

GROUND

Figure 1-1. Leakage Current Test Circuit

With the unit completely reassembled, plug the AC line cord directly into a 120V AC outlet. With the unit’s AC switch 4.

rst in the ON position and then OFF, measure the current between a known earth ground (metal water pipe, conduit,

etc.) and all exposed metal parts, including: metal cabinets, screwheads and control shafts. The current measured should not exceed 0.5 milliamp. Reverse the power-plug prongs in the AC outlet and repeat the test.

1-1-4. Product Safety Notices

Some electrical and mechanical parts have special safetyrelated characteristics which are often not evident from visual inspection. The protection they give may not be obtained by replacing them with components rated for higher voltage,

wattage, etc. Parts that have special safety characteristics are identied by

replacement that does not have the same safety characteristics as the recommended replacement part might create

shock, re and/or other hazards. Product safety is under review continuously and new instructions are issued whenever

appropriate.

on schematics and parts lists. A substitute

1-1

1-2

1. Precautions

1-2. Servicing Precautions

WARNING: An electrolytic capacitor installed with the wrong polarity might explode. Caution: Before servicing units covered by this service manual, read and follow the Safety Precautions section of

this manual.

Note: If unforeseen circumstances create conict between the following servicing precautions and any of the

safety precautions, always follow the safety precautions.

1-2-1 General Servicing Precautions

Always unplug the unit’s AC power cord from the AC power source and disconnect the DC Power Jack before 1. attempting to: (a) remove or reinstall any component or assembly, (b) disconnect PCB plugs or connectors, (c) connect a test component in parallel with an electrolytic capacitor.

Some components are raised above the printed circuit board for safety. An insulation tube or tape is sometimes 2. used. The internal wiring is sometimes clamped to prevent contact with thermally hot components. Reinstall all such elements to their original position.

After servicing, always check that the screws, components and wiring have been correctly reinstalled. Make sure that 3. the area around the serviced part has not been damaged.

Check the insulation between the blades of the AC plug and accessible conductive parts (examples: metal panels, 4. input terminals and earphone jacks).

Insulation Checking Procedure: Disconnect the power cord from the AC source and turn the power switch ON. 5. Connect an insulation resistance meter (500 V) to theblades of the AC plug. The insulation resistance between each blade of the AC plug and accessible conductive parts (see above) should be greater than 1 megohm.

Always connect a test instrument’s ground lead to the instrument chassis ground before connecting the positive lead; 6. always remove the instrument’s ground lead last.

1-3. Electrostatically Sensitive Devices (ESD) Precautions

Some semiconductor (solid state) devices can be easily damaged by static electricity. Such components are commonly

called Electrostatically Sensitive Devices (ESD). Examples of typical ESD are integrated circuits and some eld-effect

transistors. The following techniques will reduce the incidence of component damage caused by static electricity.

Immediately before handling any semiconductor components or assemblies, drain the electrostatic charge from your 1. body by touching a known earth ground. Alternatively, wear a discharging wrist-strap device. To avoid a shock hazard, be sure to remove the wrist strap before applying power to the LED TV.

After removing an ESD-equipped assembly, place it on a conductive surface such as aluminum foil to prevent 2. accumulation of an electrostatic charge.

Do not use freon-propelled chemicals. These can generate electrical charges sufcient to damage ESDs.3.

Use only a grounded-tip soldering iron to solder or desolder ESDs.4.

Use only an anti-static solder removal device. Some solder removal devices not classied as “anti-static” can generate 5. electrical charges sufcient to damage ESDs.

Do not remove a replacement ESD from its protective package until you are ready to install it. Most replacement ESDs 6.

are packaged with leads that are electrically shorted together by conductive foam, aluminum foil or other conductive materials.

Immediately before removing the protective material from the leads of a replacement ESD, touch the protective 7. material to the chassis or circuit assembly into which the device will be installed. Caution: Be sure no power is applied to the chassis or circuit and observe all other safety precautions.

Minimize body motions when handling unpackaged replacement ESDs. Motions such as brushing clothes together, 8. or lifting your foot from a carpeted oor can generate enough static electricity to damage an ESD.

1-3

1. Precautions

1-4. Installation Precautions

For safety reasons, more than a people are required for carrying the product.1.

Keep the power cord away from any heat emitting devices, as a melted covering may cause re or electric shock.2.

Do not place the product in areas with poor ventilation such as a bookshelf or closet. The increased internal 3.

temperature may cause re.

Bend the external antenna cable when connecting it to the product. This is a measure to protect it from being exposed 4.

to moisture. Otherwise, it may cause a re or electric shock.

Make sure to turn the power off and unplug the power cord from the outlet before repositioning the product. Also check 5. the antenna cable or the external connectors if they are fully unplugged. Damage to the cord may cause re or electric

shock.

Keep the antenna far away from any high-voltage cables and install it rmly. Contact with the highvoltage cable or the 6. antenna falling over may cause re or electric shock.

When installing the product, leave enough space (0.4m) between the product and the wall for ventilation purposes. 7.

A rise in temperature within the product may cause re.

2. Product specications

2-1. Specications Information

2-1-1. Model Comparison

Model UD6500VF UD6400 UD6900

Front view All

All

Detail view

2. Product specications

All

Front Color All T_Blue/CB Clear/Wine Red Clear/CB

Without Stnand 29.36 1.18 17.46

32"

With Stand 29.36 9.45 19.83

Without Stnand 36.73 1.18 21.61 36.59 1.18 21.47

Dimensions

W x D x H

(inches)

Weight

(lbs)

Panel Type All Super Clear Super Clear Super Clear

Flash All 2 G 2 G 2 G

DDR All 512 MB 512 MB 768 MB

Feature All 3D / Internet@TV / DLNA 3D / Internet@TV / DLNA

40"

With Stand 36.73 10.04 23.94 36.59 10.04 23.87

Without Stnand 42.06 1.18 24.61 41.93 1.18 24.48 41.69 1.18 24.25

46"

With Stand 42.06 10.83 26.91 41.93 10.83 26.88 41.69 10.83 26.77

Without Stnand 49.56 1.18 28.81 49.42 1.18 28.67 49.12 1.18 28.45

55"

With Stand 49.56 10.83 31.16 49.42 10.83 31.83 49.12 10.83 31.71

Without Stnand 15.56

32"

With Stand 21.52

Without Stnand 22.00 21.85

40"

With Stand 29.28 27.40

Without Stnand 28.00 26.46 26.39

46"

With Stand 36.82 35.80 35.74

Without Stnand 38.14 37.94 37.81

55"

With Stand 47.40 48.26 48.13

3D / Internet@TV

DLNA / Full browsing

2-1

2-2

2. Product specications

2-1-2. Feature & Specications

Model UN32D6500VF

Feature

Digital-TV, RF, 4-HDMI, 1-Component, 2-A/V, 3-USB2.0(Media Play), D-SUB , LAN, Wi-Fi ሪ Contrast Ratio : Mega Contrast ሪ Dynamic contrast , Super-PVA ሪ PIP(in HDMI 1, 2, 3, 4, Component 1, PC Mode and Sub picture is available only in TV mode(DTV/ATV)) ሪ Dolby Digital+, SRS theater, DVIX HD ሪ

Specications

Item Description

LCD Panel 32 inch FHD 120 Hz

Scanning Frequency Horizontal : 120 kHz ~ 139.2 kHz (Automatic)

Vertical : 94 Hz ~ 122 Hz (Automatic)

Display Colors 1.07B

Maximum resolution Horizontal : 1920 Pixels

Vertical : 1080 Pixels

Input Signal Analog 0.7 Vp-p ± 5% positive at 75Ω , internally terminated

Input Sync Signal H/V Separate, TTL, P. or N.

Maximum Pixel Clock rate 310 MHz

Active Display Horizontal/Vertical

AC power voltage & Frequency AC 110V ~ 220V, 60 Hz

Power Consumption 100 W (Under 0.1 W, Stand by)

TV System Tuning Frequency Synthesize (Refer to detailed Frequency Table)

Environmental Considerations Operating Temperature : 50˚F ~ 104˚F (10˚C ~ 40˚C)

Audio spec. - MAX Internal speaker Out : Right/Left(3 W)

Note: Dolby Digital +, Game Mode, Film Mode, Energy Saving, Anynet+

698.4(H) x 392.85 (V) (mm)

System ATSC & Clear QAM

Sound NTSC-M, Dolby Digital +

Operating Humidity : 10% ~ 80%, non-condensing

Storage temperature : -13˚F ~ 113˚F (-25˚C ~ 45˚C)

Storage Humidity : 5% ~ 95%, non-condensing

- Equalizer : 5 Band

- Output Frequency : RF : 20 Hz ~ 15.4 kHz AV/Componet / HDMI : 20 Hz ~ 20 kHz

2-3

2. Product specications

Model UN40D6500VF / UN40D64*0UF / UN40D6900WF

Feature

Specications

Item Description

LCD Panel 40 inch FHD 120Hz

Scanning Frequency Horizontal : 120 kHz ~ 139.2 kHz (Automatic)

Vertical : 94 Hz ~ 122 Hz (Automatic)

Display Colors 1.07B

Maximum resolution Horizontal : 1920 Pixels

Vertical : 1080 Pixels

Input Signal Analog 0.7 Vp-p ± 5% positive at 75Ω , internally terminated

Input Sync Signal H/V Separate, TTL, P. or N.

Maximum Pixel Clock rate 310 MHz

Active Display Horizontal/Vertical

AC power voltage & Frequency AC 110V ~ 220V, 60 Hz

Power Consumption 140 W (Under 0.3 W, Stand by)

TV System Tuning Frequency Synthesize (Refer to detailed Frequency Table)

Environmental Considerations Operating Temperature : 50˚F ~ 104˚F (10˚C ~ 40˚C)

Audio spec. - MAX Internal speaker Out : Right/Left(3 W)

Note: Dolby Digital +, Game Mode, Film Mode, Energy Saving, Anynet+

698.4(H) X 392.85(V) (mm)

System ATSC & Clear QAM

Sound NTSC-M, Dolby Digital +

Operating Humidity : 10% ~ 80%, non-condensing

Storage temperature : -13˚F ~ 113˚F (-25˚C ~ 45˚C)

Storage Humidity : 5% ~ 95%, non-condensing

- Equalizer : 5 Band

- Output Frequency : RF : 20 Hz ~ 15.4 kHz AV/Componet / HDMI : 20 Hz ~ 20 kHz

2-4

2. Product specications

Model UN46D6500VF / UN46D64*0UF / UN46D6900WF

Feature

For LED 6900 series

Specications

Item Description

LCD Panel 46 inch FHD 120Hz

Scanning Frequency Horizontal : 120 kHz ~ 139.2 kHz (Automatic)

Vertical : 94 Hz ~ 122 Hz (Automatic)

Display Colors 1.07B

Maximum resolution Horizontal : 1920 Pixels

Vertical : 1080 Pixels

Input Signal Analog 0.7 Vp-p ± 5% positive at 75Ω , internally terminated

Input Sync Signal H/V Separate, TTL, P. or N.

Maximum Pixel Clock rate 310 MHz

Active Display Horizontal/Vertical

819.36(H) X 460.89(V) (mm)

AC power voltage & Frequency AC 110V ~ 220V, 60 Hz

Power Consumption 150 W (Under 0.3 W, Stand by)

TV System Tuning Frequency Synthesize (Refer to detailed Frequency Table)

System ATSC & Clear QAM

Sound NTSC-M, Dolby Digital +

Environmental Considerations Operating Temperature : 50˚F ~ 104˚F (10˚C ~ 40˚C)

Operating Humidity : 10% ~ 80%, non-condensing

Storage temperature : -13˚F ~ 113˚F (-25˚C ~ 45˚C)

Storage Humidity : 5% ~ 95%, non-condensing

Audio spec. - MAX Internal speaker Out : Right/Left(3 W)

- Equalizer : 5 Band

- Output Frequency : RF : 20 Hz ~ 15.4 kHz AV/Componet / HDMI : 20 Hz ~ 20 kHz

Note: Dolby Digital +, Game Mode, Film Mode, Energy Saving, Anynet+

2-5

2. Product specications

Model UN55D6500VF / UN55D64*0UF / UN55D6900WF

Feature

For LED 6900 series

Specications

Item Description

LCD Panel 55 inch FHD 120Hz

Scanning Frequency Horizontal : 120 kHz ~ 139.2 kHz (Automatic)

Vertical : 94 Hz ~ 122 Hz (Automatic)

Display Colors 1.07B

Maximum resolution Horizontal : 1920 Pixels

Vertical : 1080 Pixels

Input Signal Analog 0.7 Vp-p ± 5% positive at 75Ω , internally terminated

Input Sync Signal H/V Separate, TTL, P. or N.

Maximum Pixel Clock rate 310 MHz

Active Display Horizontal/Vertical

885.6(H) X 498.15(V) (mm)

AC power voltage & Frequency AC 110V ~ 220V, 60 Hz

Power Consumption 150 W (Under 0.1 W, Stand by)

TV System Tuning Frequency Synthesize (Refer to detailed Frequency Table)

System ATSC & Clear QAM

Sound NTSC-M, Dolby Digital +

Environmental Considerations Operating Temperature : 50˚F ~ 104˚F (10˚C ~ 40˚C)

Operating Humidity : 10% ~ 80%, non-condensing

Storage temperature : -13˚F ~ 113˚F (-25˚C ~ 45˚C)

Storage Humidity : 5% ~ 95%, non-condensing

Audio spec. - MAX Internal speaker Out : Right/Left(3 W)

- Equalizer : 5 Band

- Output Frequency : RF : 20 Hz ~ 15.4 kHz AV/Componet / HDMI : 20 Hz ~ 20 kHz

Note: Dolby Digital +, Game Mode, Film Mode, Energy Saving, Anynet+

2-6

2. Product specications

2-1-3. Spec Comparison to the Old Models

Model UD6500 UC6000

Design

Diplay Type LED TV 2D LED TV 2D

Built-in Tuner O O

Resolution 1920 x 1080 1920 x 1080

LCD Panel TFT LCD Panel 120Hz TFT LCD Panel 120Hz

Picture ratio 16:9 16:9

Contrast Ratio Mega contrast 70000:1

Picture Enhancer DNIe DNIe

Equalizer 5 Band 5 Band

Auto Volume Control O O

Surround Sound Dolby Digital plus Dolby Digital plus

Speaker Output 10W + 10W 10W + 10W

PIP O O

Antena DTV 1 (Cable/Air) DTV 1 (Cable/Air)

2-7

2. Product specications

2-2. Detail Factory Option

If you replace the main board with new one, please change the factory option as well. ※ The options you must change are "Type" and "Front Color".

2-1-1. UD6400

Model Name UN40D6400UF UN46D6400UF UN55D6400UF

Vendor CMI CMI AML

Panel

SMPS

Main Assy

1 Factory Reset - - -

2 Type 40P1UF6E 46P1UF6E 55A1UF6E

3 Local set US US US

4 Model D6400 D6400 D6400

5 Tuner SEC_Si2173 SEC_Si2173 SEC_Si2173

6 DDR - - -

7 Light Effect OFF OFF OFF

8 Ch Table NONE NONE NONE

9 Country - - -

10 Front Color U-T-CL-M U-T-CL-M U-T-CL-M

CODE BN07-00997A BN07-00998A BN95-00451A

SPEC LD400CSC-C1 LD460CSC-C1 LTJ550HJ06-V

Vendor DONGYANG DONGYANG HANSOL

CODE BN44-00427B BN44-00427B BN44-00428B

SPEC BN44-00427B BN44-00427B BN44-00428B

Chassis Ass'y BN91-06484A BN91-06484B BN91-06484C

PBA Ass'y code BN94-04359A BN94-04359B BN94-04359C

2-8

2. Product specications

2-1-2. UD6420

Model Name UN40D6420UF UN46D6420UF UN55D6420UF

Vendor CMI CMI AML

Panel

SMPS

Main Assy

1 Factory Reset - - -

2 Type 40P1UF6E

3 Local set US US US

4 Model D6420 D6420 D6420

5 Tuner SEC_Si2173 SEC_Si2173 SEC_Si2173

6 DDR - - -

7 Light Effect OFF OFF OFF

8 Ch Table NONE NONE NONE

9 Country - - -

10 Front Color U-T-BL-M U-T-BL-M U-T-BL-M

CODE BN07-00997A BN07-00998A BN95-00451A

SPEC LD400CSC-C1 LD460CSC-C1 LTJ550HJ06-V

Vendor DONGYANG DONGYANG HANSOL

CODE BN44-00427B BN44-00427B BN44-00428B

SPEC BN44-00427B BN44-00427B BN44-00428B

Chassis Ass'y BN91-06484G BN91-06484H BN91-06484J

PBA Ass'y code BN94-04359G BN94-04359H BN94-04359J

46P1UF6E 55A1UF6E

2-1-3. UD6450

Model Name UN40D6450UF UN46D6450UF UN55D6450UF

Vendor CMI CMI AML

Panel

SMPS

Main Assy

1 Factory Reset - - -

2 Type

3 Local set US US US

4 Model D6450 D6450 D6450

5 Tuner SEC_Si2173 SEC_Si2173 SEC_Si2173

6 DDR - - -

7 Light Effect OFF OFF OFF

CODE BN07-00997A BN07-00998A BN95-00451A

SPEC LD400CSC-C1 LD460CSC-C1 LTJ550HJ06-V

Vendor DONGYANG DONGYANG HANSOL

CODE BN44-00427B BN44-00427B BN44-00428B

SPEC BN44-00427B BN44-00427B BN44-00428B

Chassis Ass'y BN91-06484D BN91-06484E BN91-06484F

PBA Ass'y code BN94-04359D BN94-04359E BN94-04359F

40P1UF6E 46P1UF6E 55A1UF6E

8 Ch Table NONE NONE NONE

9 Country - - -

10 Front Color U-T-BK-M U-T-BK-M U-T-BK-M

2-9

2. Product specications

2-2-4. UD6500

Model Name UN32D6500VF UN40D6500VF UN46D6500VF UN55D6500VF

Vendor CMI CMI CMI AML

Panel

SMPS

Main Assy

1 Factory Reset - - - -

2 Type 32D1UF3E 40P1UF6E 46P1UF6E 55A1UF6E

3 Local set US US US US

4 Model D6500 D6500 D6500 D6500

5 Tuner SEC_Si2173 SEC_Si2173 SEC_Si2173 SEC_Si2173

6 DDR - - - -

7 Light Effect OFF OFF OFF OFF

8 Ch Table NONE NONE NONE NONE

9 Country - - - -

10 Front Color U-T-BL-M U-T-BL-M U-T-BL-M U-T-BL-M

CODE BN07-00996A BN07-00997A BN07-00998A BN95-00451A

SPEC LD320CSC-C1 LD400CSC-C1 LD460CSC-C1 LTJ550HJ06-V

Vendor SEC DONGYANG DONGYANG HANSOL

CODE BN44-00458A BN44-00427B BN44-00427B BN44-00428B

SPEC BN44-00458A BN44-00427B BN44-00427B BN44-00428B

Chassis Ass'y BN91-06483D BN91-06483C BN91-06483A BN91-06483B

PBA Ass'y code BN94-04357D BN94-04357C BN94-04357A BN94-04357B

2-2-5. UD6900

Model Name UN46D6900WF UN55D6900WF

Vendor CMI AML

Panel

SMPS

Main Assy

1 Factory Reset - -

2 Type

3 Local set US US

4 Model D6900 D6900

5 Tuner SEC_Si2173 SEC_Si2173

6 DDR - -

7 Light Effect OFF OFF

CODE BN07-00998A BN95-00451A

SPEC LD460CSC-C1 LTJ550HJ06-V

Vendor DONGYANG HANSOL

CODE BN44-00427B BN44-00428B

SPEC BN44-00427B BN44-00428B

Chassis Ass'y BN91-06907A BN91-06907B

PBA Ass'y code BN94-04629A BN94-04629B

46P1UF6E

55A1UF6E

8 Ch Table NONE NONE

9 Country - -

10 Front Color U-T-CL-M U-T-CL-M

2-10

2. Product specications

2-3. New Functions Explanation

2-3-1. Auto Motion Plus 120Hz

Function Naming 

- 120Hz FRC + MJC : Auto Motion Plus 120Hz

Detail specications 

Function (OSD) 120Hz FRC Judder reduction (only 24p source) Blur reduction

120Hz Motion Enhancement 

Off

Clear

Standard

Smooth

Custom

Demo

Off

(repeat)

(interpolation)

Off Off

Off High

Medium Medium

High High

Level variable

(0~10)

Demo

(Standard/off)

2-11

2. Product specications

2-3-2. Media Play

Media Play 

Functions that are not supported when connecting to a PC through a network:01.

- Sorting files by preference in the Photos, Music, and Videos folders.

- The � (REW) or μ (FF) button while a movie is playing.

- Divx DRM, Multi-audio, embedded captions are not supported.

When you use Media Play mode through a network connection, depending on the functions of the 02. provided server

- The sorting method may vary.

- The scene search function may not be supported.

- The Play Continuously function, which resumes playing of a video, may not be supported.

- The Play Continuously function does not support multiple users. (It will have only memorized the point where the most recent user stopped playing.)

- The ◄ or ► buttons may not work depending on the content information.

– If you experience any file stuttering issue while playing a video over a wireless network, we recommend using a wired network."

● Supported Subtitle Formats

Name File extension Format

MPEG-4 time-based text .ttxt XML

SAMI .smi HTML

SubRip .srt string-based

SubViewer .sub string-based

Micro DVD .sub or .txt string-based

● Supported Video Formats

File

Extention

*.avi

*.mkv

*.asf ASF

*.wmv ASF Window Media Video v9 1920 x 1080 6 ~ 30 25 WMA

*.mp4 MP4

*.3gp 3GPP

*.vro

*.mpg

*.mpeg

*.ts *.tp

*.trp

Container Video Codec Resolution

Divx 3.11/4.x/5.1/6.0 1920 x 1080 6 ~ 30 8

AVI

MKV

VRO VOB

XviD 1920 x 1080 6 ~ 30 8

H.264 BP/MP/HP 1920 x 1080 6 ~ 30 25

MPEG4 SP/ASP 1920 x 1080 6 ~ 30 8

Motion JPEG 1920 x 1080 6 ~ 30 8

Divx 3.11/4.x/5.1/6.0 1920 x 1080 6 ~ 30 8

XviD 1920 x 1080 6 ~ 30 8

H.264 BP/MP/HP 1920 x 1080 6 ~ 30 25

MPEG4 SP/ASP 1920 x 1080 6 ~ 30 8

Motion JPEG 1920 x 1080 6 ~ 30 8

H.264 BP/MP/HP 1920 x 1080 6 ~ 30 25

XVID 1920 x 1080 6 ~ 30 8

H.264 BP/MP/HP 1920 x 1080 6 ~ 30 25

MPEG4 SP/ASP 1920 x 1080 6 ~ 30 8

MPEG2 1920 x 1080 24/25/30 30

MPEG1 352 x 288 24/25/30 30

MPEG2 1920 x 1080 24/25/30 30

H.264 1920 x 1080 6 ~ 30 25

MPEG2 1920 x 1080 24/25/30 30

H.264 1920 x 1080 6 ~ 30 25

VC1 1920 x 1080 6 ~ 30 25

Frame rate

(fps)

Bit rate

(Mbps)

Audio Codec

MP3/AC3

/LPCM

/ADPCM

/DTS Core

MP3/AC3

/LPCM

/ADPCM

/WMA

MP3/ADPCM /AACMPEG4 SP/ASP 1920 x 1080 6 ~ 30 8

ADPCM / AAC

AC3/MPEG

/LPCM

AC3/MPEG

/LPCM/AAC

AC3/AAC

/MP3/DD+

/HE-AAC

2-12

2. Product specications

Other Restrictions03.

N NOTE

If there are problems with the contents of a codec, the codec will not be supported.•

If the information for a Container is incorrect and the le is in error, the Container will not be able to play correctly.•

Sound or video may not work if the contents have a standard bit rate/frame rate above the compatible Frame/sec listed in the • table above.

Supports up to H.264, Level 4.1•

H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and • AVCHD are not supported.

XVID, MPEG4 SP, ASP: • – Below 1280 x 720: 60 frame max – Above 1280 x 720: 30 frame max

GMC is not support.•

Video Decoder Audio Decoder

Supports up to WMA 7, 8, 9, STD, 9 PRO•

WMA 9 PRO is not supported the 2 channel excess multi • channel or the lossless audio

WMA sampling rate 22050Hz mono is not supported. • ReadlAudio 10 lossless is not supported

2-13

2. Product specications

2-3-3. AllShare

About AllShare™ 

AllShare™ connects your TV and compatible Samsung mobile phones/ devices through a network. On your TV,

you can view call arrivals and SMS messages, and received by your mobile phones. In addition, you can play media contents including videos, photos, and music saved on your mobile phones or the other devices (such as your PC) by controlling them on the TV via the network. Additionally, you can use your TV for browsing web pages on your mobile phones.

N For more information, visit “www.samsung.com” or contact the Samsung call center. Mobile devices may need

additional software installation. For details, refer to each device’s user’s guide.

Setting Up AllShare™ 

MENU → Network → AllShare Settings → ENTERE

AllShare Settings01.

Media (On / Off) : Enables or disables the media function. When the media

function is on, you can control Media contents play using mobile phones or other devices that support DLNA DMC.

Message (On / Off) : Enables or disables the message function. (for call arrivals,

and SMS messages received by your mobile phones)

Media / Message02.

Shows a list of mobile phones or connected devices which have been set up to use the Media or Message function with this TV.

N The Media function is available in all devices which support DLNA DMC.

Allowed / Denied• : Allows/Blocks the devices.

Delete• : Deletes the devices from the list.

N This function only deletes the name of the device from the list. If the deleted device is turned on or tries to connect to the

TV, it may appear on the list again.

Using the Message Function03.

You can view call arrivals and SMS messages received by your mobile mobile phone, through the alarm window, while watching TV.

N NOTE

To disable the alarm window, set • Message to Off in the AllShare Settings.

Whether • OK is selected or not selected after a message has appeared once, the message will be deleted from the alarm window.

When a message from an unknown mobile phone is displayed, select the mobile phone in the • Message menu in

AllShare Settings, and then select Denied to block the phone.

Message View

If a new SMS message arrives while you are watching TV, the alarm window appears. If you select OK, the contents of the message are displayed.

N You can congure the viewing settings for SMS messages on your mobile phones. For the procedures, refer to the mobile

phone manual.

N Some types of characters may be displayed as blank or broken characters.

Call Arrival Alarm

If a call arrives while you are watching TV, the alarm window appears.

Schedule Alarm

You can view scheduled events in the alarm window while you are watching TV.

N You can congure viewing settings for scheduled contents on your mobile phones. For the procedures, refer to the mobile

phone manual.

N Some special characters may be displayed as blank or broken characters.

2-14

2. Product specications

Using the Media Function04.

An alarm window appears informing you that media contents (videos, photos, music) sent from a mobile phone will be displayed on your TV. The contents are played automatically 3 seconds after the alarm window appears. If you press the RETURN or EXIT button when the alarm window appears, the media contents are not played.

N NOTE

The first time a device accesses your TV through the media function, a warning popup window appears. • Press the ENTERE button to select Allow. This permits the phone to access the TV freely and use the Media function to play content.

To turn off media contents transmissions from a mobile phone, set • Media to Off in the AllShare Settings.

Contents may not play on your TV depending on their resolution and format.• The • ENTERE and l r buttons may not work depending on the type of media content.

Using the mobile device, you can control the media play. For details, refer to each mobile’s user’s guide.•

2-15

2. Product specications

AllShare™ setup and checklists 

Problem Possible Solution

Deleted mobile phone list showing up again.

Want to turn off the function of receiving message from the mobile phone.

Want to turn off the function of receiving Media from mobile phone or home network devices on TV.

Want to add deleted mobile phone or home network devices again.

Several same names of TV shows up on mobile phone.

Messages/schedules/notications from unknown mobile phone show up on TV.

SMS message notication shows up in small window.

Received SMS message is not showing up on TV.

[Menu > Application > Content View > AllShare™ > Message] • Where need to block the added mobile phone or device again. Because deleted device would be added again if that device turns on or attempt to approach.

One of the setup lists of AllShare™, you need to turn 'Message' list to 'Off'.•

One of the setup lists of AllShare™, you need to turn 'Media' list to 'Off'.•

Power on the deleted mobile phone or home network devices. • Set up the network and activate the home network function, check the connection at AllShare™.

At AllShare™ set up menu, change the name of the TV.•

[Menu > Application > Content View > AllShare™ > Message] • Where You can block the unknown mobile phone.

Besides watching TV, If some other function is activating, SMS message will show • up in small icon.

You need to nish the function and exit to Watching TV mode in order to display • SMS message in large window.

Check if TV’s network setup is all right according to setup guide.• Check if mobile phone’s network (Wi-Fi) is activated.• Among the • AllShare™ setup lists , check if the Message is ‘on’. Check if the mobile phone number is showing up on • AllShare™ message list. Check if the TV’s showing up on mobile phone’s setup lists.•

Contents that play on mobile phone doesn’t play on TV.

Suddenly TV display is changed, unwanted movie/picture/music is playing

The name of the TV is not appearing while try to play media on mobile phone.

Movie is not playing or disconnected. High resolution of Movie may not play when Wi-Fi network is not in good condition.•

Contents formats play on TV is exactly same as Media Play format. • That means some contents may not play according to its resolution and format

Before the device play, Block the device at AllShare™ media list. • Or press ‘return’ or ‘exit’ button of remote controller so that the device may not play.

Check the network of TV.• Activate the network (Wi-Fi) of mobile phone and connect to home network .• Check if the setup list of media on AllShare™ is ‘on’.• Check if mobile phone is blocked on media list . If blocked, change it to permition.•

2-16

2. Product specications

For LED 6900 series

2-3-4. Full Browser

Concepts and Features 

Full Browser ?

Using this App., you can contact the web site and contents just like web browser of PC.

1 3 42

65 987

1 Favorite

- Show the list of sites that user frequently accessed.(text list or thumbnail)

- User can export and import favorites list using USB.

2 History

- Show and record the list of the sites that user had accessed.

3 Window list

- It can show the 6 windows to the max.

- User can select window list to see the windows that opened.

4 Zooming

- User can zoom in/out the windows.

5 Tab mode

- User can focus data that linked using 4 direction button on internet websites.

6 Pointer mode

- If User select yellow color key on Tab mode, Change to pointer mode.

- User can select and control data that can not be selected on Tab mode( ex. Volume button on Flash contents) using pointer that control by 4 direct button.

7 Reading tools

If user has a hard time reading because of small font size or advertisement, select the reading tool to display only text and image.

8 Clean site

- Users can access only to websites set as "Clean Site" for safety. (ex. children care)

This function can be set through the below path. "Option" → "Setting" → Select "Clean site" When users try to first access, the password is "0000".

9 Private Browsing

- This function can be set throug the below path.

"Option" → "Setting" → Select "Private Browsing". After setting this function, all accessing sites will be stored in the user's web history.

2-17

2. Product specications

2-3-5. OTN

Over The Network : It is available that update to latest version by network.

Overview of OTN 1.

Over The Network

2-18

2. Product specications

2-3-6. 3D Display

What is 3D Display? 

A system that display 3D images articially •

How ? •  Using binocular time delay 1 Left eye recognizes left image, right eye recognizes right image. 2 Human eyes be far away each other 65mm horizontally. So each eye feels a little bit of time delay of left and right information. Human brain merges those images and can feel three-dimensional.

Side by side ◄

3D OSD terms 

3D Format : There are several 3D formats existing on how to merge Left and Right images.

Format Input images explanation Input source notes

Frame Packing

Inserting Blink Active Space between Left and Right • images. * Full resolution : 1920 x 1080 x 2 (Left and Right each) + Blink = 1920 x 2205

HDMI 1.4 1. HDMI 1.4 standard format

2. Automatically activating (Not in the menu or UI)

3. BD format

Top & Bottom

Side by Side

Line by Line

Vertical Stripe

Checker Board

Frame Sequential

2D → 3D Extract Left and Right images articially from normal 2D contents input and show it in 3D. (a function of TV)

3D → 2D

Depth

L/R correction Switch the position of Left and Right images so that correspond with 3D glasses.

3D Disable (3D off)

When watching 3D TV (input is 3D source) , if a viewer feels tired of watching 3D TV, a viewer can change the TV into 2D. (In this case , TV only displays one of Left and Right images)

Only activating in ‘2D → 3D Mode’ Control the depth of 3D. 1~10 steps, Tiredness goes higher as depth goes higher.

‘3D off’ has below meanings according to present modes .

(1) In 2D → 3D Mode : coming back to 2D

In 1 frame, Left image on the upper half, Right image • on the bottom half. * Vertically half resolution

In 1 frame, Left image on the left half, Right image on • the right half. * Horizontally half resolution

In 1 frame, every horizontal line, Left and Right • image in turn. * Vertically half resolution

In 1 frame, every vertical line, Left and Right image • in turn. * Horizontally half resolution

In 1 frame, every pixel, Left and Right image in turn. • * Half resolution both vertically and horizontally

Left And Right image in turn in every frame.•

Full resolution spatially but Half resolution timely. •

HDMI, USB, DTV(VOD),

PC 1. MPEG encoding impossible

3D Broadcasting Format

2. Only in PC

(2) In 3D mode

+ 60 hidden pages