Samsung UN32J5003AFXZA-LS02, UN32J5003AFXZA-TS01, UN32J5003AFXZA-LS03, UN32J400DAFXZA-QD01, UN32J400DAFXZA-ED02 Owner’s Manual

Figuresandillustrationsinthis UserManualareprovidedforreference Transportation to and from theService Center of TVs 37" or smalbr
onlyandmaydifferfrom actualproductappearance.Productdesignand is the responsibility of the purctqaser.Conditions covered are limited

specificationsmaybe changedwithoutnotice, only to manufacturing defects in material or workmanship, and only

IMPORTANT WARRANTY INFORMATION
REGARDING TELEVISION FORMAT VIEWING

'z See the warranty card for more information on warranty

terms.

Wide screen format LED Displays (with 16:9 aspect ratios, the

ratio of the screen width to height) areprimarily designed to vies!

wide screen format full-motion video. The images displayed on

them should primarily be in the wide screen, 16:9 ratio format, or
expanded to fill the screen, if your model offers this feature, with
the images constantly in motion. Displaying stationary graphics and
images on the screen, such asthe dark sidebars on non-expanded

standard format televbion video and programming, should be limited image elements (suctl asTV channel Iogos, TVstlows or movies
to no more than 5% of the total television viewing time per week. in panorama or 4:3format, stock or news scroll bars, etc.)on the

Additionally, vbwing other stationary imagesand text such as stock

market crawls, video game displays, station Iogos, web sites or
computer graphics and patterns, should be limited as described

above for all televisions.
Displaying stationary images that exceed the above guidelines

can cause uneven aging of LED Displays that leave subtle, but
permanent bumeddn ghost images in the LED picture. To avoid
this, vary the programming and images, and primarily display full
screen moving images, not stationary patterns or dark bars. On LED
models that offer picture sizing features, use these controls to vies!
different formats as afull screen picture.

Becarefulaboutthe televisionformatsyou selectandthe lengthof timeyou

viewthem.UnevenLEDagingasa resultofformat selectionanduse,aswellas

burnedinimages,arenotcoveredbyyour Samsunglimitedwarranly.

• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED

WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations
of the original Limited Warranty supplied with Samsung Electronics
(SAMSUNG) products, and the requirements, conditions, exclusions
and limitations contained herein, SAMSUNG will additionally
provide Warranty Repair Servbe in the United States on SAMSUNG
products purchased in Canada, and inCanada on SAMSUNG
products purchased in the United States, for the warranty period
originally specified, and to the Original Purchaser only.

The above described warranty repairs must be performed by a

SAMSUNG Authorized Service Center. Along with this Statement,
the Original Limited Warranty Statement and a dated Bill of Sale
as Proof of Purchase must be presented to the Service Center.

those encountered in normal use of the product.
Exclusions include, but are not limited to, any originally specified
provisions for in-home or on-site services, minimum or maximum
repair times, exchanges or replacements, accessories, options,
upgrades, or consumables.

For the location of aSAMSUNG Authorized Service Center, please
call toll-free:

:_' In the United States: 1-800-SAMSUNG (1-800-726-7864)
:_' In Canada: 1-800-SAMSUNG

Still image warning

Avoid displaying still images (such as jpeg picture fibs) or still

screen. The constant display of still pictures can cause ghosting or
image bumdn (image retention) on the LED screen, wtlictl will affect
image quality. To reduce the riskof this effect, please follow the

recommendations below:

- Avoid displaying the same TV ctlannel for long periods.

- Always try to display any image infull screen mode. Usethe TV's
Picture Options menu to select the optimal screen size.

- Reduce brightness and contrast values to the minimum required

to achieve the desired picture quality. Values that exceed the

minimum may speed up the bumdn process.

- Frequently use allTV features designed to reduce image retention
and screen burn-in. Refer to proper user manual section for details.

w--. , .... =--.---=-=== .... .-i

€0ntact SAMSUNGWORLDWIDE Ii
Ifyou haveany questionsorcommentsreBtingto Samsungproducts, 'l

i _ase0ontacttheSAMSUNGcustornercarecenter.

Samsung Electronics Canada
Inc. 2050 Derry Road West,

Mississauga, Ontario LSN
0B9 Canada

Sarrlsurlg Electronics America,
Inc. 85 Challenger Road
Ridgefield Park, NJ07660

IIIIIIIIIIIIIIIIIIIIIIIIII

BN68 07180A 01

@2015 Samsung Electronics Co., Ltd. All rigtlts reserved.

Your TV has two kinds of menus, the Main menu and the various

Tools menus. The Main menu gives you access to most or all of

the menu options available on your T_ The Tools menus display
a selected number of frequently used menu options that change
depending on the screen you are viewing. A Tools menu symbol
(_-]) inthe lower right side of the screen indicates that a Tools menu

is available.

The Main menu has seven primary categories:

o Picture " Input

o Sound " Application

o Channel - Support
o Setup

To vies! the Main menu, press the MENU button on your remote. To
view a Tools menu, press the TOOLS button on your remote.

'_' The menu options that appear in the Main menu depend

on the Source you have selected. For example, if you have
selected the HDMI source, the Channel category will not
appear. To see the Channel category, you must first select TV

in the Source List.

The Menu options are presented below, arranged by Main menu

categories. A Tools button symbol (_['_t_) next to an option
name indicates the option is also available inone of the Tools

menus.

Mode

Select your preferred picture mode.
:_' When your TV is connected to a PC, you can only select

Entertain and Standard.

[] Dynamic: Brightens the screen. Suitable for a bright room.
[] Standard: Suitable for a normal.

[] Movie: Darkens the screen, making it less glary. Suitable for

watching movies in a darkened room.

[] Entertain: Sharpens the picture. Suitable for games.

:_ Only available when the TV is connected to a PC.

Backllght / Contrast / Brightness / Sharpness /
Color / Tint (G/R)

[] Backlight: Adjusts the brightness of the screen byadjusting the

brightness of the individual pixels.

[] Contrast: Increases or decreases the contrast between dark and

light areas of the picture.

[] Brightness: Adjusts the brightness of the screen. Not as

effective as Backlight.

[] Sharpness: Sharpens or dulls the edges of objects.
[] Color: Adjusts the color saturation. The higher the Color setting,

the more intense the color. Low settings remove color and the
picture becomes black, white and gray.

[] Tint (G/R): Adjusts the amount of green and red in the picture.

As you increase the amount of green, the amount of red
decreases and vice versa.

:_' When the TV is connected to a PC, you can only make

changes to Backlight, Contrast, Brightness, and
Sharpness.

Picture Options

'_ When tt_eTV is connected to a PC, you can only make

changes to the Color Tone, Size and HDMI Black Level.

[] Color Tone (Cool / Standard / Warm): Cool makes the picture

bluer (cooler). Warm makes the picture redder (warmer).
:_' Warm is deactivated when the picture mode is set to

Dynamic.

[] Size: Set the size and aspect ratio of the picture on the screen.

Your cable box or satellite receiver may have its own set of
screen sizes as well. However, we highly recommend you use

the TVs 16:9 mode most of the time.
16:9: Sets the picture to the 16:9 wide screen format.

Zoom1 : Provides moderate magnification of the picture. Sides,
top, and bottom are cut off.

Zoom2: Provides larger magnification of the picture. Sides, top,
and bottom are cut off.

Wide Fit: Enlarges the aspect ratio of the picture so the picture
fits the entire screen.

4:3: Sets the picture to the old, 4:3 format and puts black or gray
borders on the right and left of the picture.

:_' Do notwatch your TV inthe 4:3 format for a long time.

Traces of borders displayed on the left, right and center of
the screen may cause image retention (screen burn) which

is not covered by the warranty.

Screen Fit: Displays the full image without any cut-off when
your TV isinputting HDMI (720p / 1080i / 1080p) or Component

(10801/1080p) HD signals.

:_' HD (High Definition) has a 16:9 aspect ratio and 1080i/1080p

(1920x 1080) or 720p (1280x720) resolution.

:_' You can adjust and store settings for each external device you

have connected to an input on the TV. Picture Sizes available
by Input Source are listed below:

Custom: Magnifies or shrinks 16:9 pictures vertically and/or
horizontally. A magnified or shrunk picture can be moved left,
right, up, and down.

ATV,AV,Component (480i, 480p) 4:3
DTV(10801,1080p), Component (1080i, 16:9, Wide Fit, 4:3,

1080p), HDMI (720p, 1080i, 1080p) Screen Fit

[] Digital Clean View (Off / Low / Medium / High / Auto) : If the

broadcast signal received by your TV isweak, you can activate
the Digital Clean View feature to reduce any static and ghosting
that may appear on thescreen.

'_ Wt_en the signal is weak, try all the Digital (}lean View

options until the TV displays the best picture.

[] HDMI Black Level (Normal / Low) : For HDMI signals, select

the black level to adjust the screen deptt_. Low make blacks look
darker.

:_ Available only in HDMI mode (RGB signals).

[] Film Mode (Off / Auto1 / Auto2) : Sets tt_e TV to automatically

sense and process film signals from allsources and adjusts the
picture for optimum quality.

'_ Available in ATV, DTV (interlace), AV, COMPONENT (480i /

10801)and HDMI (480i/1080i).

[] Motion Lighting (Off / On): When on,the TV automatically

adjusts the brightness of the screen in response to the
brightness of the room. Inbrigt_t light, the screen brightens. In
dim light, the screen dims.

16:9, Zoom1, Zoom2,

Picture Reset

[] Picture Reset (Reset Picture Mode/Cancel): Resets the

picture settings to their factory defaults.

_2_

Mode

[] Standard: Selects the normal sound mode.
[] Music: Emphasizes music over voices.

[] Movie: Provides the best sound for movies.
[] Clear Voice: Emphasizes voices over other sounds.

Equalizer

Availabb in Standard sound mode only.

[] Balance L/R: Adjusts the balance between the right and left

speaker.

[] 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth

Adjustment): Adjusts the loudness of specific bandwidth
frequencies.

[] Reset: Resets the equalizer to its default settings.

DTS TruSurround (On/Off)

Availabb in Standard sound mode only.

DTS TruSurreund is a patented DTS technology that solves
the problem of playing 5.1 multichannel content over two
speakers. TruSurround delivers a compelling, virtual surround
sound experience through any two-speaker playback system,
including internal television speakers. It isfully compatible with all

multichannel formats.

Preferred Language

Digital channeb only.
DigitaI-TV broadcasts can transmit many audio tracks

simultaneously (for example, simultaneous translations of a program
into foreign languages).

:_' You can only select a language from among the ones being

broadcast.

Multi-Track Sound (MTS)

Analog channeb only.

[] Mono: Select for channels that are broadcasting in mono or if

you are having diffieulty reeeiving a stereo signal.

[] Stereo: Select for channels that are broadcasting in stereo.
[] SAP: Select to listen to the Separate Audio Program, which is

usually a foreigndanguage translation.

:_' Depending on the program being broadcast, you can listen to

Mono, Stereo or SAP.

Auto Volume

Automatically adjusts the volume bvel when you change video

sources or content so the level remains the same.

SPDIF Output

The SPDIF (Sony Philips Digital InterFace) outputs an

uncompressed digital audio signal when you connect the digital
audio jack on ttqe back of the TV to adigital audio in jack on a

receiver orhome theater.
[] Audio Format: You can select the Digital Audio output (SPDIF)

format. The available Digital Audio output (SPDIF)format may
differ depending on the input source.

[] Audio Delay: Lets you correct timing mismatches between the

audio track and the video when you are watching the TVand
listening to digital audio output from the TV through an external
device such as an AV receiver. When you select Audio Delay, a
slider appears. Usethe left and right arrow buttons to adjust the
slider. Press ENTER _ when done (0ms _ 250ms).

Speaker Select

If you are listening to the sound track of a broadcast or movie
through an external receiver, you may hear asound echo caused
by the difference in decoding speed between the TV's speakers
and the speakers attached to your audio receiver. If this occurs, set
the TV to External Speaker.

'_' When you set Speaker Select to External Speaker, the

TV's speakers are turned off. You will hear sound through the
external speakers only. When you set Speaker Select to TV
Speaker both the TV's speakers and the external speakers
are on. You will hear sound through both.

'_' When Speaker Select is set to External Speaker, the

VOLUME and MUTE buttons will not operate and the sound
settings will be limited.

'_' Ifthere is no video signal, both the TV's speakers and the

external speakers will be mute.

Visual Impaired

(digital channeb only)
Adds verbal description to the main audio to help the visually

impaired.

Dolby Digital Comp

Set Dolby Digital compression mode.

Sound Reset

[] Reset All: Resets all sound settings to the factory defaults.

_3 Memorizing Channels

When you first set up your TV using Plug & Play, the TV
memorized the channels that were available over the air or through
your cable system and added them to the Channel List. The
Antenna and Auto Program functions described below let you
re-run the channel memorization function without having to re-run
the Plug & Play procedure.

Antenna _Air / Cable_

Before your tebvbion can memorize the available channels, you
must select your TV's signal source, Air (using an antenna) or

Cable. Select Menu > Channel > Antenna > Air or Cable. After
you have selected the signal source, go on to the Auto Program

function.
:_' Sebcting the signal source using the Antenna function also

determines the signal source the TV is tuned to. For exampb,
if you receive your TV signal over the air,and you select
Cable, you will see only snow. You must select Air to see a
picture.

Auto Program

The Auto Program function memorizes all channels that are
available over the air or througt_ your cable system and adds them

to the Channel List.
Tostart Auto Program, follow these steps:

1. Push MENUiTn _ Channel _Auto Program _ ENTER_
on your remote. The Antenna Source screen appears.

2. On the Antenna Source screen, select the source of your TV signal.

_3_

Air
If your TV is connected to an antenna choose Air, and then press

ENTER _. The TVwill automatically start memorizing ct_anneb.
Cable
If your TV is connected to a cable outlet, choose Cable, and then

press ENTER _. Go to Step 3.
Auto

If you ct_oose Auto, and then press ENTER _, the TV will
automatically select the correct Antenna source. Go to Step 3.

3. On ttqe Cable Type screen, use the _1/_/_/_ buttons to select
ttqetype of digital and analog cable systems you have: STD, HRC,
or IRC. Most systems are STD (Standard). Wtqen done, select
Start, and then press ENTER _. The TV will start memorizing

ctqanneb.

Ctqannel memorization can take up to 45 minutes, depending
on your cable system.
Memorized channels are added to the Added Channels

list. These are the ctqannels you will see when you use the
Ctqannel buttons on your remote.

Clear Scrambled Channel

Thb function filters out scrambbd channeb after Auto Program is
completed. This process may take up to 20_30 minutes.

Press the ENTER _ button to stop ttqe Clear Scrambled

Channel.
This function is only availabb in Cable mode.

_3 Managing Channels

Channe_ List

See your list of Added channels, Favorite channels, or channels
you've scheduled for viewing. Add or delete Favorite channels, add
or delete channels from theAdded Channels list, schedule channels
or programs for viewing. Watch achannel by selecting the channel
inthe All Channels, Added Channels, or Favorite screen, pressing
the A / It" buttons, and then pressing the ENTER _ button.

Channel List Screens icons are listed on the left side,
Select an icon using the _/_' buttons to view each list.

[] _ All Channels: Shows all currently available channels including

those you deleted from the Added Channels list.

[] _ Added Channels: Shows all Added Channels. These are the

channeb that appear when you press the CH button.

[] _ Favorite: Shows all favorite channels.
[] _ Programmed: Shows allchannels and programs currently

scheduled using Timer Viewing.

'_' Remote control buttons active on the Channel List screen.

° Green (Zoom): Enlarges or shrinks a channel number.
° Yellow (Select): Move the cursor to a channel. Press the Yellow

button to select the channel. A ,,/mark appears. Repeat to select
additional channels. Then, open the Tools menu and apply a

function to the channels you selected.

o r_ (Tools): Displays theChannel List Tools menu. (The Tools

menus may differ depending on the situation.)

Display Icons Used in the Channel List Screens

,7 A sebcted channel.

A Favorite channel.

Q A reserved program.

A program currently being broadcast.

_3The Channel List Tools Menu

The Channel List fbols menu contains most of the functions you

can use on the All Channels, Added Channels, and Favorite List
screens. '[b view, sebct a list screen, sebct a channel, and then
press the TOOLS button.

[] Add / Delete: Delete a channel from or add a channel to the

Added Channels list.

To delete channeb from the Added Channels list, follow these steps:

1. Select one or more channeb in the Added Channels list using
the A/_' buttons and the Yellow Sebct button on your remote.

2. Press the TOOLS button on your remote. The Tools menu
appears.

3. Select Delete in theToob menu, and then press the ENTER
button.

To add channels to the Added Channels list, follow these steps:

1. Select one or more channeb in the All Channels list using the
A/_' buttons and the Yellow Sebct button on your remote.

2. Press the TOOLS button on your remote. The Tools menu
appears.

3. Select Add in the Tools menu, and then press the ENTER_
button.

'_' All deleted channels will be shown on the All Channels list.

You add channels back to the Added Channels list on the
All Channels list.

'_' A gray-colored channel indicates the channel has been

debted from the Added Channels list.

'_ The Add menu option only appears for deleted channels.

[] Add to Favorite/Delete from Favorite: Lets you add channeb to

and debte channeb from your Favorites list.

To add channels to the Favorites list, follow these steps:

1. Select one or more channels in the All Channels list using the
A/_' buttons and the Yellow Sebct button on your remote.

2. Press the TOOLS button on your remote. The Tools menu
appears.

3. Select Add to Favorite in the Toob menu, and then press the
ENTER _ button.

To delete channeb from the Favorites list, follow these steps:

1. Select one or more channeb in the Favorite Channeb list using
the A/_ buttons and the Yellow Select button on your remote.

2. Press the TOOLS button on your remote. The Tools menu
appears.

3. Select Delete from Favorite in the Tools menu, and then press
the ENTER _ button.

[] Timer Viewing: You can schedule a channel to be displayed

automatically at a set time, even when you arewatching another
channel. You must set the current time first in the Time > Clock

function to use Timer Viewing.

To schedule a channel, follow these steps:

1. Select a channel in the Added Channels list using the A/T
buttons and the Yellow Select button on your remote.

2. Press the TOOLS button on your remote. The Tools menu
appears.

3. Select Timer Viewing in the Tools menu, and then press the
ENTER _ button. The Timer Viewing screen appears.

4. Use the 4/1_ buttons to move from entry field to entry field
and the A/T buttons to change the entries. Where numbers

are displayed, you can also enter numbers directly using the
number keypad on your remote.

:_' If you select Everyday or Every Week, the date you

select in the Date field becomes the start date for your
scheduled viewing. For Everyday, the TV will turn on
every day, at the time you selected, starting from that
date. For Every Week, the TVwill turn on every week,
on the same day of the week as the start date you
selected, at the time you selected, from that day on. If
you select Once, the TV will turn on once, on the date
and time you selected.

5. Press the ENTER _ button on your remote when done.

:_' Only Added Channels can be scheduled.
:_' Scheduled programs and channels are displayed in the

Programmed List.

:_' When you select a digital channel, press the _ button to

view the digital program list. If you highlight a program in
the list, and then press the ENTER _(Schedule) button,

you set Timer Viewing for that program directly.

[] Channel Name Edit: Analog channels only. Lets you assign a

name of up to five characters to an analog channel. For example,
Hist, Food, Golf, etc. This makes iteasier to find and select a
channel.

[] Select All: Select allthe channels in the displayed channel list.
[] Deselect All: Deselect all the selected displayed channels.

:_' You can only select Deselect All when one or more

channels are selected.

[] Auto Program: See Auto Program under Memorizing Channels.

@ Programmed List (on the Channel List Screen)

The Programmed list displays the ctlannels and programs you
have scheduled for vbwing using the Timer Viewing function. You
can view, modify, or delete a show you have scheduled using the
functions on tile Programmed List screen Tools menu.

Programmed List Screen Tools Menu
[] Change Info: Change the sctqeduling information for a stqow or

channel you have scheduled.

Tochange the information, follow ttqese steps:

1. Select the Programmed List icon on the left side of the
Channel List screen, and then press the ENTER _ button.

2. On the Programmed List screen, select the show or channel
entry you want to change, and then press the TOOLS button.

The Tools Menu appears.

3. Select Change Info, and then press the ENTER_ button.
The Timer Viewing screen appears.

4. Use the _/_- buttons to move from entry field to entry field
and ttqe A/_' buttons to change the entries. Where numbers
are displayed, you can also enter numbers directly using the
number keypad on your remote.

5. Press the ENTER _ button when done.

[] Cancel Schedules: Cancel a stqowor channel you have

scheduled.

Tocancel a scheduled show or channel, follow these steps:

1. Select the Programmed List icon on the left side of the
Channel List screen, and then press the ENTER _ button.

2. On the Programmed List screen, select the show or channel
entry you want to cancel, and then press the TOOLS button.
The Tools Menu appears.

3. Select Cancel Schedules, and then press the ENTER_
button. The Cancel Schedule screen appears.

4. Select OK, and ttqen press ttqe ENTER _ button.

[] Information: Display the information for a stqow orchannel you

have sctqeduled. You can also ctqange ttqeschedule Information.

1. Select the Programmed List icon on the left side of the
Channel List screen, and then press the ENTER _ button.

2. On the Programmed List screen, select the show or channel
entry you want information for, and then press the TOOLS

button. The Tools Menu appears.

3. Select Information, and then press the ENTER_ button.
The Timer Viewing Information screen appears.

4. Select Change Info and press the ENTER _ button to
ctqange information, or select Close and press the ENTER

button to close ttqeInformation screen.

[] Select All / Deselect All: You can select or deselect all channels

in the channel list.

C] Other Channel Menu Functions

Channel Mode (Added Channels/Favorite
Channels)

Lets you select the channel list displayed when you press the
ACHV (Channel) button on your remote. For example, if you
select Favorite Channels, you will only see Favorite channels when

you press the ACHV button.

Fine Tune

Analog channeb only.

If the reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store
operation. Ifthe signal is weak or distorted, fine tune the channel
manually.

:_' Select the channel, and then select Fine Tune.
:_' Fine tuned channels that have been saved are marked with

an asterisk "*" on the right-hand side of the channel number
in the channel banner.

:_' To reset fine-tuning, select the channel, select Fine Tune, and

then select Reset on the Fine Tune screen.

Plug & Play

Lets you re-run the Plug & Play initialsetup procedure. For
instructions, see your Quick Start Guide.

Language

Set the menu language.
:_' Choose between English, Espahol, and Francais.

_3Setting the Time

Time

'_' The time you set will appear when you press the INFO

button.

[] Clock: Set the clock so you can use thevarious timer features

of the T_
:_' If you disconnect the power cord, you have to set the

clock again.

To set the clock, follow these steps:

1. Select Setup >Time > Clock.

2. Press ENTER _ and select Auto or Manual, and then press
ENTER _ again.

If you selected Auto:
The TV will automatically download the correct time from a

digital channel.

- Select Time Zone, and then press the ENTER_ button.

Use theA/_' buttons to select your Time Zone, and then
press ENTER _.

- Select DST (Daylight Savings Time), and then press

ENTER _. Select On if you want to turn the DST

adjustment on and off manually. Select Off to turn off the

DST adjustment. Select Auto if you want the TV to adjust

to DST automatically. Press ENTER _ when done.

'_' DST and Time Zone function are only available when

the Clock Mode is set to Auto.

If you selected Manual:

The Clock Set screen appears. Use the A/_' buttons to
change the values in each field or usethe number buttons to
enter the values directly. Use the _/_- buttons to move from
field to field. When done with allthe fields, press ENTER _.

:_' Available only when Clock Mode is set to Manual.

[] Sleep Timer

Automatically shuts off the TV after a preset period of time. (30,

60, 90, 120, 150 and 180 minutes).

:_' To cancel the Sleep Timer, select Off.

Timer 1 / Timer 2 / Timer 3

Turns the TV on and off automatically at times and days you
select. You can set three different on/off timer settings.

:_' You must set the clock first.
[] On Time / Off Time: Set the hour, minute, am/pm, and

Activate/Inactivate fields for the On Time and Off Time. Use the

_li/_- buttons to move from field to field. Usethe _/_' buttons

to change the values in each field. To activate the timer with
the setting you have chosen, set the Activate/Inactivate field to

Activate.

[] Volume: Set the desired loudness.
[] Contents: To select what will be turned on when the timer

setting is activated. You can set the TVto turn on a specific
channel or play back contents such as photo or audio files.

Use the _1i/_-buttons to move to move to the Contents field,
and then press the ENTER_ button. The Contents screen
appears. Use the _li/_- buttons to move from field to field. Use
the _/_ buttons to change the values ineach field.

- TV/USB: Select TV or USB. The USB devbe must be
connected to your TV before you can select USB.

- Antenna: Displays the current antenna source, Air or Cable.

- Channel: Ifyou have selected TV, select the desired channel.

- Music/Photo: Ifyou have selected USB, folios! these steps to
select a folder containing MP3 (Music) or JPEG (Photo) files on

the USB devbe:
:_' The maximum displayed number of files, including sub

folders, in one folder of USB storage device is 2000.

:_' The media may not be playing smoothly when using the

device lower than USB 2.0.

1. Use the _1/_ buttons to move to the field under Music
or the field under Photo, and then press the ENTER

button. The TV displays a single folder (the Root folder)
and the type or name of the device.

2. Press the ENTER _ button. A list of folders on the device
appears.

:_' If there are no folders on your device, press the

Yellow select button to select the Root folder, and
then press the RETURN button. The Timer screen

re-appears.

3. Use the _/_' buttons to highlight a folder that contains
music or photos, and then press the Yellow select button

to select the folder.

4. Press the RETURN button. The Timer screen re-appears.

[] Repeat: Select Once, Everyday, Mon~Fri, Mort-Sat,

Sat-Sun or Manual. If you select Manual, you can select the
days you want to activate the timer by using the _/_ buttons
to highlight the day, and then pressing the ENTER _ button.
To unselect a day, highlight it,and then press the ENTER _

button.

When you finished making allyour selections on the Timer screen,
press either the ENTER _ or RETURN button.

_3Other Features

Game Mode (On/Off)

When you connect a game console such as a PlayStation TM

or XboxTM to your TV,you can enjoy a more realistic gaming
experience by turning on the Game Mode function.

'_' Precautions and limitations for game mode:

* Beforeyou disconnect the game console and connect another

external device, set Game Mode to Off inthe setup menu.

* Ifyou display theTV menu in Game Mode, the screen shakes

slightly.

'_' Game Mode is not available when the input source is set to

TV.

:_' After connecting the game console, set Game Mode to On.

You may notice slightly reduced picture quality.

Program Rating Lock

The Program Rating Lock feature lets you block programs
you've determined are inappropriate for your children based on

the program's ratings. To access the Program Rating Lock

feature and make any changes, you must enter a PIN (personal

identification number). To watch a blocked program, you must also
enter the same PIN.

'_' Program Rating Lock is not available in HDMI or

Component mode.

'_ The default PIN number of a new TV set is"0-0-0-0". You can

set your own PIN using the Change PIN function.

How It Works

When you access the Program Rating Lock Menu functions for

the first time, the PIN input screen appears. Enter 0-0-0-0. The PIN
screen closes and the Program Rating Lock Menu appears. Every
time you access the Program Rating Lock functions, the PIN
screen will appear and you must enter a PIN.

When the Rating Lock screen appears, select Program Rating

Lock, and then press ENTER _. Select On, and then press the
ENTER _ key again. Depending on what type of programs or
movies you want to block, select one of the options on the screen,
and then press the ENTER _ button. The options are listed below:

[] TV Parental Guidelines: You can block TV programs based

on their ratings. This function allows you to control what your
children arewatching.

[] MPAA Rating: You can block movies based on their MPAA

ratings. The Motion Picture Association of America (MPAA) has
implemented a rating system that provides parents or guardians
with advanced information on which films are appropriate for

children.

[] Canadian English: You can block TV programs based on their

Anglophone Canadian ratings.

[] Canadian French: You can block TV programs based on their

French Canadian ratings.

[] Downloadable U.S. Rating: Parental restriction informationcan

be used while watching DTV channels.

Locking/Blocking Programs or Movies
You lock or block programs and/or movies inessentially the same

way for each option. Each option displays a grid or table. Allthe

tables have ratings listed on the left. The TV Parental Guidelines

option also has kinds of content listed across the top: All: Lock all
TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation
/ L: Adult Language / D: Sexually Suggestive Dialog.

ToIocWblock movies or shows with certain ratings and/or kinds of
content, click the square next to the rating and/or under the kind of

content. A lock appears. TounlocWunblock, click the square again.
When you click a low rating, allthe ratings above it will also display

locks. You can also Allow All or Lock All. When done, press the
RETURN button on your remote.

[] Change PIN: The Change PIN screen will appear. Choose any

4 digits for your PIN and enter them in Enter New PIN fields.
Re-enter the same 4 digits in Confirm New PIN fields. When the
Change PIN screen disappears, press the OK button. The TV
has memorized your new PIN.

'_' If you forget the PIN, press the remote-control buttons in

the following sequence, which resets the pin to "0-0-0-0" :
POWER (off) _ MUTE _ 8 _ 2 _ 4 _ POWER (on)

Caption

(On-Screen Text Dialogue)
[] Caption: You can switch the caption function on or off. If

captions are not available, they will not be displayed on the
screen.

'_' The Caption feature does not work in Component or

HDMI mode.

[] Caption Mode: You can select the desired caption mode.

Default / CC1-CC4 / Text1 -Text4: (analog channels only) The

Analog Caption function operates in either analog TV channel

mode or when a signal is supplied from an external device to the
TV. (Depending on the broadcasting signal, the Analog Caption
function may or may not work with digital channels.)

Default / Service1 -Service6 / CCl -CC4 / Text1 -Text4:

(Digital channels only) The Digital Captions function works with

digital channels.

'_' Service1-6 may not be available in digital caption mode

depending on the broadcast.

[] Digital Caption Options: (Digital channels only)

Size: Options include Default, Small, Standard and Large. The

default is Standard.

Font Style: Options include Default and Styles 0 to 7. The

default is Style 0.

Foreground Color: Options include Default, White, Black, Red,

Green, Blue, Yellow, Magenta and Cyan. You can change the

color of the letters. The default is White.

Background Color: Options include Default, White, Black, Red,

Green, Blue, Yellow, Magenta and Cyan. You can change the

background color of the captions. The default isBlack.

Foreground Opacity: This adjusts the opacity of text. Options

include Default, Transparent, Translucent, Solid and Flashing.

Background Opacity: This adjusts the opacity of the caption

background. Options include Default, Transparent, Translucent,

Solid and Flashing.

Return to Default: This option sets each Size, Font Style,

Foreground Color, Background Color, Foreground Opacity and

Background Opacity to its default.

'_' Digital Caption Options are available only when you can

select Default and Service1 - Service6 in Caption Mode.

'_' The Foreground and Background cannot be set to the

same color.

Boot Logo

Enable/dbable displaying the logo while the TV starts up.

Eco Solution

[] Energy Saving (Off / Low / Medium / High / Picture Off) :

This adjust the brightness of the TV inorder to reduce power

consumption. If you sebct Picture Off, the screen is turned
off, but the sound remains on. Press any button except volume

button to turn on the screen.

[] No Signal Power Off (Off / 15 rain. / 30 rain. / 60 min.): Sets

how quickly the TV switches to standby mode, if no picture is
being received.

'_' Disabled when the PC is in power saving mode.

[] Auto Power Off (Off / On): The TVwill be automatically turned

off when no user operation is received for 4 hours.

Auto Protection Time

[] Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10

hours): If the screen remains idle with a still image for a certain
period of time you define, the screen saver is activated to prevent

the formation of ghost images on the screen.

Self Diagnosis

[] Picture Test: Use to check for picture prebbms. Ifthe probbm

appears in the test picture, select Yes and follow the directions
on the screen.

[] Sound Test: Use the builtdn n_elodysound to check for sound

probbms. If the probbm occurs during the test, sebct Yes and

follow the directions on the screen.

[] Signal Strength: (Digital channels only) An HD channel's

reception quality iseither perfect or the channels are unavailabb.

Adjust your antenna to increase signal strength.

[] Reset: Reset all settings to the factory defauRs.

'_ The PIN input screen appears before the setup screen.
'_' Enter your 4-digit PIN. Change the PIN using the Change

PIN option.

Software Upgrade

Software Upgrade can be performed by downloading the latest

firmware from samsung.com to a USB memory device.

Use Mode

You can turn the TV into a display model for retail environments by
setting Use Mode to Store Demo.

'_' For all other uses, sebct Home Use.
'_' With Store Demo, some functions are disabled, and the TV

automatically resets itself after a preset amount of time.

HD Connection Guide

Refer to this information wtqen connecting external devices to the

TV.

Contact Samsung

Vies! this information when your TV does notwork properly or
when you want to upgrade the softs!are. You can find information

regarding our carl centers and how to download products and
softs!are.

Enjoy ptqotos, music and/or movie fibs saved on a
USB Mass Storage Class (MSC)device.

_3Connecting a USB Device

1. Turn on your TV.

2. Connect a USB device containing photo, music, and/or movie
files to the USB jack on the back of the TV.A pop up window
appears.

3. Press the MED_A_Pbutton on your remote. The Media Play
menu appears.

_3Using the Media Play Menu

To open Media Play in the Menu, follow these steps:

1. Press the MENU button. Then, press the • or • button to
select Applications on the left, and ttqen press the ENTER

button.

2. Press the • or _' button to sebct Media Play (USB), and then
press the ENTER _ button.

3. Press the _ or _ button to sebct an icon(Videos, Music,

Photos, Settings), and then press the ENTER _ button.

Media Play might not work properly witt_ unlicensed
multimedia fibs.

'_' Need-to-Know List before using Media Play (USB)

° The file system supports FAT16, FAT32 and NTFS.
° Certain types of USB Digital camera and audio devices may not

be compatible with this TV.

° Media Play only supports USB Mass Storage Class (MSC)

devices. MSC is a Mass Storage Class Bulk-Only Transport
device. Examples of MSC are Thumb drives and Flash Card

Readers. Devices should be connected directly to the TV's USB
port. USB HDD is not supported.

° Before connecting your device to the TV, phase back up your

flies to prevent them from damage or loss of data. SAMSUNG is
not responsible for any data file damage or data loss.

° A USB device that requires high power (more than 0.5A) may not

be supported.

° Do not disconnect the USB device while it is loading.
° The higher the resohtion of the image, the longer it takes to

display on the screen.

° The maximum supported JPEG resolution is 15360 x 8640 pixels.

• If a fib is corrupted or the TV does not support the fib type, the
"Not Supported File Format" message appears.

° The TV cannot play MP3 files with DRM that have been

downloaded from a for-pay site. Digital Rights Management
(DRM) is a technology that supports the creation, distribution,
and management of digital content in an integrated and
comprehensive way, including protecting the rights and interests
of content providers, preventing illegal copying of contents, and
managing billing and settbments.

° PTP devices are not supported.
° If an over-power warning message is displayed while you are

connecting or using a USB device, the device may not be
recognized or may malfunction.

° Ifthe TV has no input during the time period set in Auto

Protection Time, the Screen saver will run.

° The power-saving mode of some external hard disk drives may

be released automatically when your connect them to the TV.

° Ifyou use a USB extension cable, the TV may not recognize the

USB device or may not be able to read the files on the device.

° Ifa USB device conneeted to the TV is not recognized, the list of

files on the device is corrupted, or a file in the list is not played,
connect the USB device to a PC, format the device, and check

the connection.

° Ifa file you deleted from the PC is still found when you run Media

Play, use the "Empty the Recycle Bin" function on the PC to
permanently delete the file.

° Photos only supports the sequential jpeg format.
° The Videos option does not support the scene search and

thumbnail functions.

° Ifthe number of files and folders saved on a USB storage device is

over approximately 4000, the files and folders may not appear and
some folders may not open.

° The maximum displayed number of files, including sub folders, in

one folder of USB storage device is 2000.

° The media may not be playing smoothly when using the device

lower than USB 2.0.

Videos

1. Inthe Media Play menu, press the 4 or _, button to select
Videos, and then press the ENTER _ button.

2. Press the 4/I_/A/T buttons to select a video in the file list.

3. Press the ENTER _ button or []E_(Play) button.

The file name is displayed on the top of the screen with the
playing time.

Ifvideo time information is unknown, playing time and the

progress bar are not displayed.
During video playback, you can search using the _1and

I_ buttons.

'_' In this mode, you can play movie clips contained in a game,

but you cannot play the game itself.

o Supported Subtitle Formats

External

N

MPEG4 timedtext

SAMI

SubRip

SubViewer
MicroDVD

SubStationAlpha

AdvancedSubStationAlpha

Internal

Xsub

SubStationAlpha

AdvancedSubStationAlpha

SubRip

MPEG4 Timedtext

iJ!!i!iiiiiiiiiiii!ii!!__i!_i_iiiiiiiiiii!!iii;iiiiiiiii!iiiiiiiiiiiiiiiiiii_:_i_iiiiiiiiiiiiiiiiiiiiiiiiiiiiii!il

AVl PictureFormat
MKV TextFormat
MKV TextFormat

MKV TextFormat
MP4 TextFormat

ttxt
sml

srt

sub

sub or txt

ssa

ass

'_ Supported Video Formats

MotionJPEG 640x480 8

H,264 BP/

*avi

*mkv

*asf

*wmv

*rap4

*tp

*trp

*racy

*fly

*rob

*svi
*divx

*webm WebM VP8 1920x1080 6-_30 20 Vorbis

MP/HP

H 264 BP /

MP/HP

AVI LPCM
MKV Divx 3 11 /4 ADPCM
ASF / 5 / 6 (IMA, MS)
MP4 AAC

3GP MPEG4 SP/ HE AAC
MOV ASP MAX 30

FLV DD+
VRO

Media Video MPEG(MP3)

VOB v9NC1) DTS (Core,

PS LBR)
TS G,711(A

Window

MPEG2

MPEG1

1920xl 080 30

Other Restrictions

'_ Codecs may not function properly if there is a problem with the

content.

o Video content does not play or does not play correctly if there is

an error in the content or container.

o Sound or video may not work if they have standard bit rates/

frame rates above the TV's compatibility ratings.

o If the Index Table is has an error, the Seek (Jump) function will

not work.

o When playing video over a network connection, the video may

not play smoothly because of data transmission speeds.

o Some USB/digital camera devices may not be compatible with

the TV.

o While the TV is playing a video at the bit rate of 10 Mbps or

higher, the menu screens may be displayed slowly.

-9-

AC3

WMA

Law, _JLaw)

Supports up to H.264, Level 4.1

H.264 FMO / ASO / RS, VC1 / AP L4 are not supported.

GMC 2 or above is not supported.

WMA 10 Pro supports up to 5.1 channels. Supports up to the M2

profile. WMA Iossless audio is not supported.

QCELP and AMR NB/WB are not supported.
Vorbis is supported for up to 2 channels.

Dolby Digital Plus is supported for up to 5.1 channels.

The DTS LBR codec is only available for MKV / MP4/TS
containers.

Music

1. In the Media Play menu, press the _1ior _, button to select
Music, and then press the ENTER _ button.

2. Press the 4/_,/_/_ buttons to select the desired Music in the
file list.

3. Press the ENTER _ button or _ (Play) button.

'_' During music playback, you can search using the 4 and

_, button.

_' _ (REW) and [E_ (FF) buttons do not function during

play.

'_' Media Play only displays files with MP3 and PCM file

extension. Other file extensions are not displayed, even if they
are saved on the same USB device.

'_' If the sound is abnormal when playing MP3 files, adjust the

Equalizer in the Sound menu. (An over-modulated MP3 file
may cause a sound problem.)

1. Inthe Media Play menu, press the 4 or 1_ button to select
Photos, then press the ENTER _ button.

2. Press the _1i/_-/_/_ buttons to select a photo in the file list.

3. Press the ENTER _ button or _ (Play) button.

_' NOTE

* Whilea photo list is displayed, pressthe EEl(Play)/ ENTER_

button on the remote control to start a slide show.

* Allfilesin the filelist section willbe displayed in the slide show.
* During the slide show, files are displayed in order.

* During the slide show, you canadjust the slide show speed

using (E_]) (REW)or ([]E_)(FF)button.

* Youcan move to other filesusing _1or I,- button.

'_' Media Play can play Music files automatically during a Slide

Show if Background Music is set to On.

_ You cannot change the Mode itsBackground Music until the

Background Music file has finished loading.

,_Supported Photo Formats

JPEG

Base-line 15360 x 8704

Progressive 1024 x 768

Other Restrictions

_' CMYK, YCCK Color space JPEG are not supported.

Playing Multiple Files

[] Playing selected video/music/photo files

1. On the File List screen, highlight a file, and then press the Yellow

button on your remote.

2. Repeat Step 1 to select multiple files.

_s_' NOTE

• A _ mark appears to the left of the selected files.
" To cancel a selection, press the Yellow button again.

" To deselect all selected files, press the TOOLS button, select

Deselect All, and then the ENTER _ button.

3. Press the TOOLS button, select Play Selected Contents, and

then press the ENTER _ button.

[] Playing a video/music/photo folder

1. With the folders on your USB device displayed, use the
4/l_/&/_ buttons to highlight a folder.

2. Press the TOOLS button, select Play Folder, and then press

the ENTER_ button.

-10-

Media Play - Additional Functions

[] Videos/Music/Photos Play Option menus

Widen playing a file, press the TOOLS button.

Title

Repeat Mode

Picture Size

Picture Mode
Sound Mode

Subtitle
Settings

Audio Format

Audio
Language

Stop Slide
Show /

Start Slide
Show

Slide Show
Speed

Background
Music

Zoom

Rotate

_nformation

You can select another video file
[o play directS/. ,,Z

iYou can play movie and music
ifilesrepeatedly. _ "/

iYou can adjust the picture size to

your preference. ,7

iYoucan adjust the picture setting. _"
iYoucan adjust the sound setting. ,,Z ,,/
iYoucan play the video with

Subtitles. This function only works
f the subtitles havethe same file

'_ame as the video.
You can select the digital audio

sutput format.

iYou can change the audio
ilanguage ifthe video has more
ithan one language.

You can start or stop a Slide
Show.

You can select the slide show
speed during the slide show. ,,Z

You can set and select
background music when ,,Z

iwatching a Slide Show.

You can zoom into images in full
screen mode.

You can rotate images in full
screen mode. _"

You can see detailed information

iabout the played file. _ "/

Settings

Using the Setup Menu

[] DivX® Video On Demand: Shows the registration code

authorized for the TV. If you connect to the DivX web site and
register with the 10-digit registration code, you can download
the VOD activation file. Once you play it using Media Play, the
registration is completed.

'_' For more information on DivX® VOD, visit "http://vod.dNx.

corn".

[] Information: Select to view information about the connected

USB device.

Installing the Wall Mount Kit

The wall mount kit (sold separately) allows you to mount the TV on

the wall.
For detailed information about installing the wall mount, see

the instructions provided with the wall mount items. Contact a
technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the
product or injury to yourself or others if you elect to install the wall
mount on your own.

Wallmount.......................

bracket

Wall Mount Kit Specifications (VESA)
'_' The wall mount kit is not supplied, but sold separately.

Install your wall mount on a solid wall perpendicular to the floor.
When attaching to other building materials, please contact your

nearest dealer. If you install the TV on a ceiling or slanted wall, it
may fall and result in severe personal injury.

_' NOTE

• Standard dimensions for wall mount kits are shown in the table
below.

" When purchasing our wall mount kit, a detailed installation

manual and all parts necessary for assembly are provided.

" Do not use screws that do not comply with the VESA standard

screw specifications.

" Do not use screws that are longer than the standard dimension

or do not comply with the VESA standard screw specifications.
Screws that are too long may cause damage to the inside of the

TV set.

" For wall mounts that do not comply with the VESA standard

screw specifications, the length of the screws may differ
depending on the wall mount specifications.

" Do not fasten the screws too firmly. This may damage the

product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.

" Samsung is not liable for product damage or personal injury

when a nomVESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.

" Do not mount the TV at more than a 15 degree tilt.
" Always have two people mount the TV on a wall.

Do not install your Wall Mount Kit while

_your TV is turned It result in

personal injury due to electric shock.

on,

may

Securing the TV to the Wall

Caution: Pulling, pushing, or Climbing onto the TV

may cause the TV to fall. In particular, ensure that your

children do not hang over or destabilize the TV; doing
so may cause the TV to tip over, resulting in serious

injuries or death. Eollow all safehi precautions provided

on the included Safety Flyer. For added stability, install
the anti-fall device for safety purposes, as follows.

To prevent the TV from falling

'_' Since the necessary brackets, screws, and string or cable are

not supplied, please purchase these separately.

1. Insert the screws into the wall brackets and firmly fasten them to
the wall. Make sure the screws are firmly fixed to the wall.

'_' We strongly recommend you drive the screws into a stud.

2. Using screws, insert the screws through the TV brackets, and
then fasten the screws to the top VESA screw holes on the back

of the TV.

3. Connect the brackets on the TV and the brackets on the wall
with a strong string or cable, and then tie the string or cable
tightly to the brackets.

'_' Verify all connections are properly secured. Periodically check

the connections for any sign of fatigue or failure. If you have
any doubt about the security of your connections, contact a
professional installer.

'_ Install the TV close to the wall so that it does not fall.
'_' Connect the string or cable so that the brackets on the wall

are at the same height or lower than the brackets on the TV.
Untie the string or cable before moving the TV.

'_' To purchase a TV Holder kit, contact Samsung customer care.

-11-

Kensington Lock

The Kensington Lock is not supplied by Samsung. It is a device
used to physically fix the system when using it in a public place.
Refer to the manual provided with the Kensington Lock for additional
information on proper use.

'_' Please find a "l_l" icon on the rear of the TV. The Kensington

slot is beside the "l_l" icon.

'_' The position and color may differ depending on the model.

Display Modes (HDMI/DVl Input)

Optimal resolution: 4 series:1366 x 768@60Hz / 5 series: 1920 x 1080@60Hz

640x 350 31489 7OO86 25175 +/ .Z

IBM

72Ox 4OO 31489 7OO87 28322 /+ .Z
640x 480 35000 66667 30240 / .Z

MAC

832 x 624 49726 74551 57284 / .Z
1152x870 68681 75062 100000 /

640x 480 31489 5994O 25175 / .Z
640x 480 37881 728O9 31500 / .Z
64Ox 48O 37500 75OOO 31 5OO / .Z

800x 600 37879 60317 4OOOO +/+ .Z
800 x 600 48O77 72188 5OOOO +/+ .Z
8OOx 6OO 46875 75OOO 495OO 4/+ .Z
1024 x 768 48363 6OOO4 65000 / .Z

1024 x 768 56478 7OO69 75OOO / .Z
1024 x 768 60023 75O29 78760 +/+ .Z
1152 x 864 67500 75000 108000 +/+
1280x 720 45OOO 6OOOO 7425O +/+ .Z
1280 x 800 49702 59810 83500 /+

1280 x 1024 63981 60020 108000 +/+
1280 x 1024 79978 75025 135000 +/+

1366 x 768 47712 5979O 855OO +/+ .Z
1440 x 900 55935 59887 106500 /+

1600 x 900RB 60000 60000 108000 +/+

1680 x 1050 65290 59954 146250 /+
1920 x 1080 67500 60000 148500 +/+

Troubleshootinq.

If the TV seems to have a problem, first review this list of possible problems and solution. If none of tt_ese troubleshooting tips apply, visit
samsung.com, then click on Support, or call Samsung customer service at 1-800-SAMSUNG.

Flickering and Dimming Ifyour Samsung Television is flickering or dimming sporedical_/, you may need to disable some of its energy efficient

Component Connections / Ifyou find that the color on your Samsung television 'Sscreen is not correct or black and white, first run a Self
Screen Color Diagnosis Test on the TV to make sure there are no device issues.

Screen Brightness Ifyou find that the colors on your Samsung TV are correct but just a littletoo dark or bright, there are some settings

Unwanted Powering off Ifyour Samsung TV appears to turn off by itself, there may bean issue with either your Timer settings or your Eco

features like the Energy Saving feature. Follow the steps below with your remote to turn these features off or on.

Energy saving : MENU _ Setup _ Eco Solution _ Energy Saving _Select Settings

Self Diagnosis : User Menu _ Support _ Self Diagnosis _ Picture Test
If the test is ok, try making sure ;
Your connections are all consistent. Fer example, ifyou've used the AV In jack on your TV, make sure you have

used the AV Out jack on your video source.
Try making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled

Pb, Pr, and Y,to connect your TV and video source, make sure yeu have connected the blue Pb jack on the
video source to the blue Pbjack on the TV, the red Pr jack on the source to the red Pr jack on the TV.

you should check before calling for a repair.

Backlight, Contrast, Brightness, Sharpness, Color, Tint and so on. Go to "Picture" in the Menu, and then try
adjusting these options.

friendly No Signal Power Off feature.

First make sure the Sleep Timer is not accidentally set. The Sleep Timer letsyeu fall asleep with the TV still on

knowing that it will turn off after acertain period of time and not waste energy.

Sleep Timer : User Menu _ Setup _ Time _ Sleep Timer

Ifthe Sleep Timer is not activated, yeu may have engaged the No Signal Power Off or Auto Power Off feature.

No Signal Power Off : User Menu _ Setup _ Eco Solution _ No Signal Power
Auto Power Off :User Menu _ Setup _ Eco Solution _ Auto Power Off

-12-

Trouble Powering On Before you turn the TVon, find the red light on the right or left bottom of your TV. Press the power on button

Stand Assembly • If you have any trouble assembling the stand, refer to "Install the Stand" in the Start Up or Stand Installation Guide.
Cannot find a channel • Re-run Plug & Play or run Auto Program. (go to MENU - Channel - Auto Program)
Peor Picture Eirst, pedorm the Picture Test and to see if your TV is displaying the teet image Pr0Perly,

The TV image does not look as good as • If you have an analog cable/satellite box, upgrade to adigital set top box. Use HDMI or Component cables to

itdid in the store, deliver HD (high definition) picture quality.

The picture is distorted: macroblock • Compression of video contents may cause picture distortion, especial_/on fast moving pictures such as those in

error,small block, dots, pixelization, sports and action movies.

Color iswrong or missing. • If you're using a component connection, make sure the component cables are connected to the correct jacks.

There ispoor color or brightness. • Adjust the Picture options in the TV menu. (go to Picture Mode / Color / Brightness / Sharpness)

There isa dotted line on the edge of • If the picture size is setto Screen Fit, change it to 16:9.
the screen. • Change the cable/satellite box resolution.

The picture is black and white. • If you are using an AV composite input, connect the video cable (yellow) to the Green jack of Component Input 1

When changing channels, the picture • If connected to a cable box, please try to reset it. (Reconnect the AC cord and wait until the cable box reboots. It
freezes or is distorted or delayed, may take up to 20 minutes)

Sound Problems Perform the Sound Test to confirm that your TV audio is properly operating.

There isno sound or the sound is too • Check the volume of the device (Cable/Sat Box, DVD, Blu-ray, etc.) connected to your TV.

low at maximum volume.

The picture is good, but there is no • If you are using an external device, check the device's audio output option Ex. you may need to change your

sound, cable box's audio option to HDMI ifthe box is connected to your TV using an HDMI cable.

The speakers are making an * Check the cable connections. Make sure a video cable is not connected to an audio input.

inappropriate noise. * For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.

No Picture, No Video '

The TV will not turn on. • Make sure the AC power cord is securely plugged into the wall outlet and the TV.

The TV turns off automatically. * Ensure the Sleep Timer isset to Off in the Time menu.

on the TV or remote and the light should blink about 5 times before the TV turns on.

Ifyou find that yeu are having trouble powering on your Samsung television, there are a number of things to check it

before making a call to the service department.

• If you happen to be using the TV as a monitor and the stand-by light only blinks for afew seconds when you
press the power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your
keyboard or move the mouse. Then try turning your TV on.

Ifyou're sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If
you have acable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting a
signal. To test the signal output of your cable or satellite box, press the guide or info button on the cable or satellite

box remote control. Ifthe screen displays the guide or info data, the problem is caused by the box.

_o to MENU : Support - Self Diagnosis = Pi#ture Test

Ifthe test image is properly displayed, the poor picture may be caused by the source or signal.

• Cable/Satellite subscribers: Try HD channels from the channel line up.

• Air/Cable Antenna connection: Try HD channels after running Auto Program.
=& Many HD channels broadcast up scaled SD (Standard Definition) content. The picture quality of up

scaled SD content is low.

Adjust the Cable/Set top box video output resolution to 1080i or 720p.

• A weak signal can cause picture distortion. This is not a TV problem.

• Mobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels.

Incorrect or loose connections may cause color problems or a blank screen.

• Adjust the Energy Saving option in the TV menu. (goto MENL_ - Setup - Eco Solution - Energy Saving )

• Try resetting the picture to the default picture settings. (go to MENU - Picture - Picture Reset)

on the "11/.

• Set the output resolution of the cable box to 1080i or 720p.

(go t0 MENU : Support = Self Diagngsis t Sound Test)

Ifthe audio isOK, the sound problem may be caused by the source or signal.

• Reboot the connected device by reconnecting the device's power cable.

Perform the Sound Test as explained above.

Make sure the wall outlet isworking.
Try pressing the POWER button on the TV to make sure the problem is not the remote.

If the TV turns on, refer to 'Remote control does not work' below.

• If your PC is connected to the T_,check your PC power settings.

Make sure the AC power cord is plugged securely into the wall outlet and the TV.
When yeu are watching TV connected to an antenna or cable connection, the TV will turn off after 10- 15 minutes

if there is no signal.

There isno picture/video. * Check the cable connections. (Remove and reconnect all cables connected to the TV and external devices).

RF (Cable/Antenna} Connection

The TV isnot receiving all channels. • Make sure the coaxial cable isconnected securely.

No Caption on digital channels. * Check the Caption Setup menu. Try changing Caption Mode Servicet to CCt.

The picture is distorted: macroblock, * Compression of video contents may cause picture distortion, especial_/on fast moving pictures such as those in
error, small block, dots, pixelization, sports and action movies.

Others

Purple/green rolling horizontal bars and * Remove the left and right audio connections from the set-top-bex. If the buzzing stops, this indicates that the set-
buzzing noise from the TV speakers with top-box has a grounding issue. Replace the Component video cables with an HDMI connection.
Component cable connection.

The picture will not display in full screen. * HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.

The remote control does not work. • Replace the remote control's batteries. Make sure you insert them with the polarity ( _/ ) correct.

The cable/set top box remote control * Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for
does not turn theTV on or off, or adjust the SAMSUNG TV code.

the volume.
A "Mode Not Supported" message * Check the supported resolution of the TV and adjust the external device's output resolution accordingly. Refer to

appears, resolution settings in this manual.
Caption on the TV menu is greyed cut. * You cannot select Caption in the TV menu when watching content from a device connected via HDMI or

There isa plastic smell from the TV. • This smell is normal and will dissipate inafew days.
TV Signal Strength is unavailable in the * This function is one/available for digital channels received through an Antenna / RF/Coax connection.

Self Diagnosis Test menu.
TV is tilted to the right or left side. * Remove the stand base from the TV and reassemble it.

The Channel menu is greyout * The Channel menu isone/available when you select the TV source.
(unavailable).

Your settings are lost after 30 minutes or * IfTV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from
every time the TV is turned off. Store Demo mode to Home Use mode using the Plug & Play procedure. Press the SOURCE button to select

You have intermittent loss of audio or * Check the cable connections and reconnect them.
video. * Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible

You see small particles when yeu look * This ispart of the product's design and isnot adefect.
closely at the edge of the frame of

the "11/.

POP (TV'S internal banner ad) appears • Select Home Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup).
on the screen.

Set your external device's (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV
input. For example, ifan external device's output is HDMI, it should be connected to an HDMI input on the TV.

Make sure your connected devices are powered on.
Be sure to select the correct input source by pressing the ,>OURCE button on the remote control.
Reboot the connected device by reconnecting the device's power cable.

Run Auto Program to add available channels to the channel list.
go to MENU _Channel - Auto Program then select Auto and make sure the correct Cable TV signal type is set
in the menu. There are 3 options. (STD, HRC and IRC)

Verify the antenna ispositioned correctly.

Some channels may not have caption data.

A weak signal can cause picture distortion. This is not a TV problem.

Black bars on the top and bottom appear when movies that haveaspect ratios different from your TV play on the
TV.

Adjust the picture size option on your external device or change the TV to full screen.

Clean the transmission window located on the tep of the remote control.
Try pointing the remote directly at the TV from 5,-6 feet away.

Component.
Caption must be activated on the external device.

TV mode, go to MENU _ Setup _ Plug & Play _ ENTER E_.

enough for long term use. If mounting the TVto the wall, we recommend using cables with 90 degree
connectors.

'_' This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may

be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

'_' Watch these troubleshooting on video at www.samsung.com/spsn.
'_' Some functions and pictures shown in this manual are available on specific models only.
'_' You can keep your TV in optimum condition by upgrading it with the latest firmware from the Samsung web site (samsung.com

Support _ Downloads). To upgrade, download the firmware to your computer, copy the firmware file to a USB memory stick,

insert the USB memory stick into the TV's USB slot, and then select Support > Software Upgrade in the TV's menu.

Storage and Maintenance

'_ If a sticker was attached to the T screen some aeDns ca remain after/ou remove me sticker. Please clean it before watching

the TV.

'_ The exterior and screen of the Droauor can ge_ scra_cnea aunn_ ;leaning Be sure _o w De _ne ex_enor ann soreel careful y using

a soft cloth to prevem scra[cnes.

Clean the Product wl_n a soft cloth

product. Any liquid that goes into the
product may cause a failure fire 3r

Do not spray wa[er dwectly onto _ne r- II
electric SHOCK

License

This DivXCertified® device has passed ngorous _esr_ng_o ensure _ p_ays DivX® waeo
Tc 9lay 9urchased DNX movlee first register your device a_voa.alvx.com Find your registration cone q me

DNX VOD section ol /our device Se_L:)menu

|_1| _ DivX Certified® te pla_ DivX® video ur)to HD 1080D including premium comenr
HD DNX(_ DivX Certified® and associated _gbsare trademarks of Div)_ LC and are used inner license

Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,71 O;7,519,274.
This device supports DNX Plus Streaming® for enjoying HD movies and TV shows with advanced features

(multi-language subtitles, multiple audio tracks, chapters, smooth FF/RW, etc.) streamed to your device.

@; ,,_,2 For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS,

!1,1 11,3_

2.0 Channel of DTS, inc. © DTS, inc. All Rights ReeorMod.

StudioSound trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. AllRights Reserved.

r_ DOLBY,, Manufactured under license from Dolby Laboratories.

BlelTALPLUS DoIby and the double-D symbol aretrademarks of Dolby Laboratories.

_ _ m The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or

I! II II []

Open Source Announcement
To send inquiries and requests for questions regarding open sources, contact Samsung via Email ([e-mail]).

the Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.0 Ctqannel is a trademark

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS,
the Symbol, DTS incombination with the Symbol, and DTS Studio Sound are registered trademarks or

registered trademarks of HDMI Licensing LLC inthe United States and other countries.

dampened wl_n in s.smal amount of
water Do not use a flammaDle iicJiG

e._ Denzene. thinners) or a c_ean_n9

agent.

EnvironmentalConsiderations
OperatingTemperature

OperatingHumid[ly
StorageTemperature

Storage Humidity

50°F to 104°F (10°Oto 40°0)
10%to 80%, non-condensing

-4°F to 113°F (-20°O to 45°0 )
5% to 95%, non-condensing

...... :iiiiiiiiiii

DisplayResolution
Screen Size
(Diaf_onal)
Sound

Output
Dirnensiens('4/X Hx D)

Body 29.3 x 17.4 x 2.7 inches

Wi_hstand 29.3 x 18.2 x 5.9 inches

Wkhaut Stand 8.1 Ibs (3.7 kg)
WkhStand 8.3 Ibs (3.8 kg)

Design and specifications are subject to change without prior notice.

This device is a Class B digital apparatus.
'_' For information about the power required and more about power consumption, refer to the label attached to the product.
_' Typical power consumption is measured according to Energy Star Program requirements for televisions.
'_' Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.

samsung.com/recyclingdirect or call, [phone].
[] JACK PANEL DETAIL / REAR VIEW

NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Referto the dimensions
prior to performing installation of your T_4Not responsible for typograpt_ical or printed errors.

© 2015 Samsung Electronics America, Inc

1366 x 768 1920 x 1080

32" Class 32" Class

(31.5" measured diagonally) (31.5" measured diagonally)

lOW

(745.4 x442.2 x 69.0 ram)

(745.4 x 463.1 x 150.5 ram)

29.1 x 17.1 x 2.7 inches

(741.0 x436.0 x 69.0 ram)

29.1 x 18.4x 5.7 inches

(741.0 x 468.7 x 145.5 mm)

8.0 Ibs (3.66 kg)

8.2 Ibs (3.74 kg)

(Unit: inches)

-13- -14- -15- -16-