E-MANUAL
Thank you for purchasing this Samsung
product. To receive more complete service,
please register your product at
www.samsung.com/register
Model __________ Serial No. ____________
Contents
Channel Setting
• UsingtheINFObutton(Now&Nextguide) 1
• Memorizingchannels 2
• UsingtheChannelmenu 6
• LockingProgramme 19
• OtherFeatures 21
Basic Features
• ChangingthePresetPictureMode 32
• AdjustingPictureSettings 33
• ChangingthePictureOptions 40
• ChangingthePresetSoundMode 46
• AdjustingSoundSettings 47
• SelectingtheSoundMode 54
Preference Features
• Executinginitialsetup 55
• SettingtheTime 56
• UsingtheSleepTimer 58
• SettingtheOn/OffTimer 59
• EconomicalSolutions 64
• OtherFeatures 66
Advanced Features
• UsingtheSourceList 70
• ConnectingaUSBDevice 71
• UsingtheMediaContents 77
• PlayingthePhotos/Videos/Music 79
Other Information
• Viewingthee-Manual 87
• UsingtheSelfDiagnosis 88
• UpdatingtheSoftware 90
• ChangingtheUseMode 92
• ViewingtheContactSamsung 93
• UsingtheSportsMode 94
• UsingtheSatelliteSystem 95
• UsingtheWiredNetwork 103
❑ Using the INFO button (Now & Next guide)
The display identifies the current channel and the status of certain audio-video
settings.
The Now & Next guide shows daily TV programme information for each channel
according to the broadcasting time.
When you press the INFO button, a channel information banner will appear
N
on the top of the screen. And then press the ENTER
the details of the programme.
●
Scroll ◄, ► to view information for a desired programme while watching
the current channel.
●
Scroll ▲, ▼ to view information for other channels.
button, you can see
E
▶
English
❑Memorizing channels
■Aerial
MENU
O
Before your television can begin memorising the available channels, you must
specify the type of signal source that is connected to the TV.
m
Broadcasting
→
→
Aerial
ENTER
→
E
◀ ▶
English
■Auto Tuning
(depending on the country)
MENU
O
Automatically allocated programme numbers may not correspond to actual
N
or desired programme numbers. If a channel is locked, the PIN input window
appears.
●
Auto Tuning
Aerial (Air / Cable): Select the aerial source to memorise.
When selecting Air, scans for a channel automatically and stores in the
◀ ▶
N
T V.
Channel Type (Digital & Analogue / Digital / Analogue): Select the channel
source to memorise.
m
Broadcasting
→
Auto Tuning
→
ENTER
→
E
English
When selecting Cable
–
Operator Selection (depending on the country): Selects a provider of
cable services.
–
Search Mode: Scans for all channels with active broadcast stations and
stores them in the TV.
If you select Quick, you can set up the Network, Network ID,
N
Frequency, Modulation and Symbol Rate manually by pressing the
button on the remote control.
–
Network: Selects the Network ID setting mode among Auto or Manual.
Digital & Analogue, Digital or Analogue
→
◀ ▶
●
Network ID: When Network is Manual, you can set up Network ID
using the numeric buttons.
English
●
Frequency: Displays the frequency for the channel (differs in each
country).
●
Modulation: Displays available modulation values.
●
Symbol Rate: Displays available symbol rates.
●
Cable Search Option
(depending on the country & cable channels only)
Sets additional search options such as the frequency and symbol rate for a
cable network search.
Start Frequency / Stop Frequency: Set the start or stop frequency (differs in
◀ ▶
each country).
Symbol Rate: Displays available symbol rates.
Modulation: Displays available modulation values.
English
❑Using the Channel menu
O
MENU
m
Broadcasting
→
Channel List
→
ENTER
→
E
■Channel List
The Channel List contains the channels your TV displays when you press the
channel button. You can view channel information, All, TV, Radio, Data/Other,
Analogue or Favourites 1-5.
Press
button to change the channel order according to channel number or name on the
(Mode) button to change the channel mode, or press ◄ (Sorting)
►
◀ ▶
list.
When you press the CH LIST button on the remote control, Channel List
N
screen will be displayed at once.
English
Channel Sorting
●
Number / Name: Arranges the channel order according to channel number
or name on the list.
Channel Mode
●
Air / Cable: Switches to Air or Cable.
●
Edit Favourites: Set channels you watch frequently as favourites.
For detailed information about using Edit Favourites, refer to “Edit
N
Favourites”.
●
◀ ▶
Favourites 1-5: Shows all favourite channels, arranged in up to five groups.
Each group has a separate screen.
N
The TV displays Favourites 1-5 only if you have added favourites using
Edit Favourites.
English
●
All: Shows all currently available channels.
●
TV: Shows all currently available TV channels.
●
Radio: Shows all currently radio channels.
●
Data/Other: Shows all currently available MHP or other channels.
●
Analogue: Shows all currently available analogue channels.
◀ ▶
English
■Guide
MENU
O
The EPG (Electronic Programme Guide) information is provided by broadcasters.
Using programme schedules provided by broadcasters, you can specify
programmes you want to watch in advance so that the channel automatically
changes to the selected programme channel at the specified time. Programme
entries may appear blank or out of date depending on a channel status.
●
Red (Quick Nav): Viewing the TV programmes on the list quickly using
a
▲/▼/◄/►
m
Broadcasting
→
buttons.
Guide
→
ENTER
→
E
◀ ▶
●
●
Green (Channel Category): Select the type of channels you want to
b
display.
Yellow (Schedule Manager): Moves to the reserved programmes in
{
Schedule Manager.
English
■Schedule Manager
MENU
O
You can set a desired channel to be displayed automatically at the intended time.
In addition, you can view, modify or delete a channel you have reserved to watch.
You must set the current time first using the Time
N
System menu to use this function.
1. Press the Schedule on the Schedule Manager screen. The Schedule
Viewing menu appears.
◀ ▶
2. Press the
●
Aerial: Select the desired broadcasting signal.
●
Channel: Select the desired channel.
Broadcasting
m
→
▲/▼/◄/►
Schedule Manager
→
buttons to set each option menu.
→
Clock function in the
→
ENTER
E
English
●
Repeat: Select Once, Manual, Sat~Sun, Mon~Fri or Everyday to set at
your convenience. If you select Manual, you can set the day you want.
N
The (
N
●
Date: You can set the desired date.
It is available when you select Once in Repeat.
N
●
Start Time: You can set the start time you want.
If you want to edit or cancel a reserved schedule, select the reserved
schedule on Schedule Manager. Then press the ENTER
select the Edit or Delete.
) mark indicates the day you’ve selected.
c
button and
E
◀ ▶
English
■Edit Channel
MENU
O
You can edit or delete channels.
1. Go to Edit Channel screen.
2. Press the
ENTER
You can select more than one channel.
N
Press the ENTER
N
m
E
Broadcasting
→
▲/▼
button. The (
buttons to select the desired channel, then press the
Edit Channel
→
) mark indicates the channel you’ve selected.
c
again to deselect the channel.
E
ENTER
→
E
◀ ▶
English
Using the coloured and function buttons with the Edit Channel.
N
●
●
●
Red (Change Number): Changes channel order on the channel list.
a
–
Green (Lock / Unlock): Lock a channel so that the channel cannot be
b
selected and viewed. / Unlock the channel that you locked.
N
N
Yellow (Delete): Deletes a channel from the channel list.
{
(Done): Completes changing the channel order.
E
This function is available only when the Channel Lock is set to On.
The PIN input screen appears. Enter your 4-digit PIN. Change the
PIN using the Change PIN option.
◀ ▶
English
●
●
●
●
Blue (Select All / Deselect All): Selects or deselects all channels at
}
once.
(Go To): Goes to channel directly by pressing numbers (0~9).
(Page): Move to previous or next page.
k
(Tools): Displays the option menu. The option menu items that appear
T
may differ depending on the channel status and type.
–
Sorting (digital channels only): Changes the list ordered by channel
number or channel name.
–
Aerial: Select the desired broadcasting signal.
◀ ▶
English
–
Category: Change the channel mode to All, TV, Radio, Data/Other,
Analogue, Recently Viewed, Most Viewed. The selected channel
mode is displayed.
–
Edit Favourites: Go to Edit Favourites screen directly.
–
Rename channel (analogue channels only): Assign a name of up to
five characters to a channel. For example, Food, Golf, etc. This makes
it easier to find and select the channel.
–
Channel Info: Display details of the selected channel.
–
Information: Display details of the selected programme.
◀ ▶
English
■Edit Favourites
t
MENU
O
You can add, edit or delete favourite channels.
1. Go to Edit Favourites screen.
2. Press the
ENTER
3. Choose a specific favourite list among Favourites 1-5 using b (Change Fav.)
button, and then press the
◀ ▶
added in Favourites 1-5.
One favourite channel can be added in several of favourites among
N
Favourites 1-5.
m
E
Broadcasting
→
▲/▼
button.
buttons to select the desired channel, and then press
Edit Favourites
→
(Add) button. The selected channel has been
{
ENTER
→
E
English
Using the coloured and function buttons with the Edit Favourites.
N
●
●
●
Red (Category / Change order)
a
–
Category: Changes the channel mode to All, TV, Radio, Analogue,
Data/Other, Recently Viewed, Most Viewed. The selected channel
mode is displayed.
–
Change order: Changes the favourite channel order.
–
Green (Change Fav.): Changes favourite list among Favourites 1-5.
b
Yellow (Add / Delete)
{
(Done): Completes changing the channel order.
E
◀ ▶
–
Add: Adds selected channels to Favourites 1-5.
●
–
}
once.
Delete: Deletes the favourite channel from Favourites 1-5.
Blue (Select All / Deselect All): Selects or deselects all channels at
English
●
●
k
●
T
may differ depending on the channel status and type.
–
–
–
–
(Go To): Goes to channel directly by pressing numbers (0~9).
(Page): Move to previous or next page.
(Tools): Displays the option menu. The option menu items that appear
Copy to favourites: Edit the selected favourite channel in Favourites
1-5.
Rename Favourites: Assign your own favourite channel name.
Aerial: Select the desired broadcasting signal.
Edit Channel: Go to Edit Channel screen directly.
◀ ▶
–
Information: Display details of the selected programme.
English
❑Locking Programme
■Programme Rating Lock
(depending on the country)
MENU
O
Prevent unauthorized users, such as children, from watching unsuitable
programme with a user-defined 4-digit PIN code. If the selected channel is
locked, the “\” symbol will be displayed.
The items of Programme Rating Lock differs depending on the country.
◀ ▶
N
m
Broadcasting
→
Programme Rating Lock
→
ENTER
→
E
English
■Channel Lock
MENU
O
Lock channels in Channel menu to prevent unauthorized users, such as children,
from watching unsuitable programme.
Available only when the Source is set to TV.
N
m
Broadcasting
→
Channel Lock
→
ENTER
→
E
◀ ▶
English
❑Other Features
■Channel Settings
MENU
O
●
Country (Area)
(depending on the country)
The PIN input screen appears. Enter your 4 digit PIN number.
Digital Channel: Change the country for digital channels.
◀ ▶
Analogue Channel: Change the country for analogue channels.
m
Broadcasting
→
Channel Settings
→
ENTER
→
E
English
●
Manual Tuning
Scans for a channel manually and stores in the TV.
If a channel is locked, the PIN input window appears.
N
According to the channel source, Manual Tuning may be supported.
N
●
Digital Channel Tuning: Scans for a digital channel manually and stores
in the TV. Press the New button to search the digital channels. When
scanning has finished, a channel is updated in the channel list.
–
When selecting Aerial
–
When selecting Aerial
Air: Channel, Frequency, Bandwidth
→
Cable: Frequency, Modulation, Symbol
→
◀ ▶
Rate
English
●
Analogue Channel Tuning: Scans for an analogue channel. Press the
New button to search the channels by adjusting the Programme, Colour
System, Sound System, Channel, Search.
Channel mode
N
–
P (programme mode): When tuning is complete, the broadcasting
stations in your area have been assigned to the position numbers
from P0 to P99. You can select a channel by entering the position
number in this mode.
–
C (aerial channel mode) / S (cable channel mode): These two
◀ ▶
modes allow you to select a channel by entering the assigned
number for each aerial broadcasting station or cable channel.
English
●
Fine Tune
(analogue channels only)
If the signal is weak or distorted, fine tune the channel manually.
Fine tuned channels are marked with an asterisk “*”.
N
To reset the fine-tuning, select Reset.
N
●
Transfer Channel List
(depending on the country)
Imports or exports the channel map. You should connect a USB storage to
◀ ▶
use this function.
The PIN number input screen appears. Enter your 4 digit PIN number.
N
Supported file systems are FAT and NTFS.
N
●
Delete CAM Operator Profile: Selects the CAM operator to delete.
English
■Subtitle
t
MENU
O
Use this menu to set the Subtitle mode.
●
Subtitle: Switches subtitles on or off.
●
Subtitle Mode: Sets the subtitle mode.
●
Subtitle Language: Sets the subtitle language.
If the programme you are watching does not support the Hearing
N
Impaired function, Normal automatically activates even if the Hearing
◀ ▶
N
Impaired mode is selected.
English is the default in cases where the selected language is unavailable
in the broadcast.
m
Broadcasting
→
Subtitle
→
ENTER
→
E
●
Primary Subtitle: Sets the primary subtitle.
●
Secondary Subtitle: Sets the secondary subtitle.
English
■Audio Options
(digital channels only)
O
●
MENU
Audio Language
Change the default value for audio languages.
Primary Audio / Secondary Audio: You can set the primary or secondary
audio.
The available language may differ depending on the broadcast.
N
m
Broadcasting
→
t
Audio Options
→
ENTER
→
E
◀ ▶
English
●
Audio Format
When sound is emitted from both the main speaker and the audio receiver,
a sound echo may occur due to the decoding speed difference between
the main speaker and the audio receiver. In this case, use the TV Speaker
function.
Audio Format option may differ depending on the broadcast. 5.1ch
N
Dolby digital sound is only available when connecting an external speaker
through an optical cable.
●
Audio Description (not available in all locations)
◀ ▶
This function handles the Audio Stream for the AD (Audio Description) which
is sent along with the Main audio from the broadcaster.
Audio Description: Turn the audio description function on or off.
Volume: Adjust the audio description volume.
English
■Teletext Language
(depending on the country)
MENU
O
●
Teletext Language
English is the default in cases where the selected language is unavailable
N
in the broadcast.
●
Primary Teletext / Secondary Teletext
Primary Teletext and Secondary Teletext may not be supported in
N
◀ ▶
some locations.
m
Broadcasting
→
Teletext Language
→
ENTER
→
E
English
■Digital Text
(UK only)
MENU
O
If the programme broadcasts with digital text, this feature is enabled.
MHEG (Multimedia and Hypermedia Information Coding Experts Group)
N
An International standard for data encoding systems used in multimedia and
hypermedia. This is at a higher level than the MPEG system which includes
data-linking hypermedia such as still images, character service, animation,
graphic and video files as well as multimedia data. MHEG is user runtime
◀ ▶
interaction technology and is being applied to various fields including VOD
(Video-On-Demand), ITV (Interactive TV), EC (Electronic Commerce), tele
education, teleconferencing, digital libraries and network games.
m
Broadcasting
→
Digital Text
→
ENTER
→
E
English
■Common Interface
O
●
●
MENU
CI Menu: This enables the user to select from the CAM-provided menu.
Select the CI Menu based on the menu PC Card.
CAM video transcoding: You can configure the setting to transcode the
video codec from the CAM automatically. Turn it Off if you do not want to use
it.
You must use a CAM that supports transcoding the video codec.
N
m
Broadcasting
→
Common Interface
→
ENTER
→
E
◀ ▶
English
●
Application Info: View information on the CAM inserted into the CI slot and
on the “CI or CI+ CARD” which is inserted into the CAM. You can install the
CAM anytime whether the TV is on or off.
1. Purchase a CI CAM module at your nearest dealer or by phone.
2. Firmly insert the “CI or CI+ CARD” into the CAM in the direction of the
arrow.
3. Insert the CAM with the “CI or CI+ CARD” into the common interface slot,
in the direction of the arrow so that it aligns parallel with the slot.
4. Check if you can see a picture on a scrambled signal channel.
◀ ▶
English
❑Changing the Preset Picture Mode
■Picture Mode
MENU
O
Select your preferred picture type.
When connecting a PC, you can only make changes to the Entertain and
N
Standard.
●
Dynamic: Suitable for a bright room.
●
◀ ▶
Standard: Suitable for a normal environment.
●
Natural
●
Movie: Suitable for watching movies in a dark room.
●
Entertain: Suitable for watching movies and games.
m
→
for LED 5 series
t
Picture
Picture Mode
→
: Suitable for reducing eye strain.
ENTER
→
E
N
It is only available when connecting a PC.
English
❑Adjusting Picture Settings
■Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality control.
NOTE
N
●
In analogue TV, Ext., AV modes of the PAL system, the Tint (G/R)
function is not available.
●
When connecting a PC, you can only make changes to Backlight,
Contrast, Brightness and Sharpness.
◀ ▶
●
Settings can be adjusted and stored for each external device connected
to the TV.
●
Lowering picture brightness reduces power consumption.
English
■Picture Size
MENU
O
Set the various picture options such as picture size and aspect ratio.
The available items may differ depending on the selected mode.
N
Depending on the input source, the picture size options may vary.
N
●
Picture Size
of screen sizes as well. However, we highly recommend you use 16:9 mode
most of the time.
◀ ▶
Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio.
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnifies the picture size more than 4:3.
m
Picture
→
t
Picture Size
→
: Your cable box/satellite receiver may have its own set
ENTER
→
E
N
Adjusts the Position by using ▲, ▼ buttons.
English
Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.
Adjusts the Zoom or Position by using ▲, ▼ button.
N
4:3: Sets the picture to basic (4:3) mode.
Do not watch in 4:3 format for a long time. Traces of borders displayed
N
on the left, right and centre of the screen may cause image retention
(screen burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when HDMI (720p /
1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
◀ ▶
English
Smart View 1
for LED 5 series
: Reduces original screen by 50%.
Smart View 2
NOTE
N
●
Smart View 1 is enabled only in HDMI mode.
●
Smart View 2 is enabled only in DTV and HDMI modes.
●
The picture size can vary depending on the input resolution when
content is played using Videos under Media Play.
●
Zoom/Position: Adjust the picture size and position. It is only available in
Zoom.
for LED 5 series
: Reduces original screen by 25%.
◀ ▶
●
Position: Adjust the picture position. It is only available in Screen Fit or Wide
Zoom.
English
N
NOTE
●
After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i
/ 1080p) mode, you may need to centre the picture:
1. Select the Position. Press the ENTER
2. Press the ▲, ▼, ◄ or ► button to move the picture.
●
If you want to reset the position you adjusted, select Reset in the
Position screen. The picture will be set to its default position.
●
If you use the Screen Fit function with HDMI 720p input, 1 line will be cut
at the top, bottom, left and right as in the overscan function.
button.
E
◀ ▶
●
4:3 Screen Size: Available only when picture size is set to Auto Wide. You
can determine the desired picture size at the 4:3 WSS (Wide Screen Service)
size or the original size. Each European country requires different picture size.
English
■PIP
t
MENU
O
You can watch the TV tuner and one external video source simultaneously. For
example, if you have a cable box connected to the Cable In jack, you can use PIP
to watch programs from the cable box and watch a movie from a Blu-ray player
attached to the HDMI In jack.
NOTE
N
●
If you turn the TV off while watching in PIP mode, the PIP window will
◀ ▶
disappear.
●
You may notice that the picture in the PIP window becomes slightly
unnatural when you use the main screen to view a game or karaoke.
m
Picture
→
→
PIP
ENTER
→
E
English
●
PIP settings
Main picture Sub picture
Component, HDMI TV
●
PIP: Activate or deactivate the PIP function.
●
Aerial: Select either Air or Cable as the input source for the sub-screen.
●
Channel: Select the channel for the sub-screen.
●
Size: Select a size for the sub-picture.
●
Position: Select a position for the sub-picture.
◀ ▶
●
Sound Select: You can choose the desired sound in PIP mode.
English
❑Changing the Picture Options
■Advanced Settings
MENU
O
(available in Standard / Movie mode)
You can adjust the detailed setting for the screen including colour and contrast.
When connecting a PC, you can only make changes to the White Balance
N
and Gamma.
●
◀ ▶
Dynamic Contrast: Adjust the screen contrast.
●
Black Tone: Select the black level to adjust the screen depth.
●
Flesh Tone: Adjust the flesh tone colour.
m
Picture
→
Advanced Settings
→
ENTER
→
E
English
●
RGB Only Mode: Displays the Red, Green and Blue colour for making fine
adjustments to the hue and saturation.
●
Colour Space: Adjust the range of colours available to create the image.
●
White Balance: Adjust the colour temperature for a more natural picture.
R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue)
darkness.
R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue) brightness.
Reset: Resets the White Balance to its default settings.
●
Gamma: Adjust the primary colour intensity.
◀ ▶
●
Motion Lighting: Reduce power consumption by brightness control adapted
motion.
Only available in Standard mode.
N
When changing a setting value of Backlight, Brightness or Contrast,
N
Motion Lighting will be set to Off.
English
■Picture Options
O
N
●
MENU
When connecting a PC, you can only make changes to the Colour Tone.
Colour Tone
Warm1 or Warm2 will be deactivated when the picture mode is
N
Dynamic.
Settings can be adjusted and stored for each external device connected
N
to an input on the TV.
m
Picture
→
Picture Options
→
ENTER
→
E
◀ ▶
English
●
Digital Clean View: If the broadcast signal received by your TV is weak, you
can activate the Digital Clean View feature to reduce any static and ghosting
that may appear on the screen.
When the signal is weak, try other options until the best picture is
N
displayed.
Auto Visualisation: When changing analogue channels, displays signal
strength.
Only available for analogue channels.
N
When the INFO button is pressed, the signal strength bar is displayed.
N
◀ ▶
When bar is green, you are receiving the best possible signal.
N
●
MPEG Noise Filter: Reduces MPEG noise to provide improved picture
quality.
English
●
HDMI Black Level: Selects the black level on the screen to adjust the screen
depth.
Available only in HDMI mode (RGB signals).
N
●
Film Mode: Sets the TV to automatically sense and process film signals from
all sources and adjust the picture for optimum quality.
Available in TV mode and external input mode which supports SD (480i /
N
576i) and HD (1080i) except in PC mode.
If the screen does not seem natural, change its option to Off / Auto1 /
N
Auto2 in Film Mode.
◀ ▶
●
LED Clear Motion: Removes drag from fast scenes with a lot of movement
to provide a clear picture.
It will be deactivated when the picture mode is set to Natural.
N
The screen may become slightly darker when you play LED Clear
N
Motion.
English
■Picture Off
t
MENU
O
The screen is turned off but the sound remains on. Press any button except
volume button to turn on the screen.
m
Picture
→
Picture Off
→
ENTER
→
E
■Reset Picture
MENU
O
Resets your current picture mode to its default settings.
m
Picture
→
Reset Picture
→
ENTER
→
E
◀ ▶
English
❑Changing the Preset Sound Mode
■Sound Mode
MENU
O
●
Standard: Selects the normal sound mode.
●
Music: Emphasizes music over voices.
●
Movie: Provides the best sound for movies.
●
Clear Voice: Emphasizes voices over other sounds.
●
◀ ▶
N
Amplify: Increase the intensity of high-frequency sound to allow a better
listening experience for the hearing impaired.
If Speaker Select is set to External Speaker, Sound Mode is disabled.
m
Sound
→
Sound Mode
→
ENTER
→
E
English
❑Adjusting Sound Settings
■Sound Effect
(standard sound mode only)
O
●
MENU
DTS TruSurround
This function provides a virtual 5.1 channel surround sound experience
through a pair of speakers using HRTF (Head Related Transfer Function)
technology.
m
Sound
→
Sound Effect
→
ENTER
→
E
◀ ▶
●
DTS TruDialog
This function allows you to increase the intensity of a voice over background
music or sound effects so that dialogue can be heard more clearly.
English
●
Equaliser
Use Equaliser to customize sound setting for each speaker.
Balance: Adjusts the balance between the right and left speaker.
100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the
level of specific bandwidth frequencies.
Reset: Resets the equaliser to its default settings.
If Speaker Select is set to External Speaker, Sound Effect is disabled.
N
◀ ▶
English
■Speaker Settings
MENU
O
●
Speaker Select
A sound echo may occur due to a difference in decoding speed between
the main speaker and the audio receiver. In this case, set the TV to External
Speaker.
When Speaker Select is set to External Speaker, the volume and
N
MUTE buttons will not operate and the sound settings will be limited.
When Speaker Select is set to External Speaker.
◀ ▶
N
N
●
When Speaker Select is set to TV Speaker.
Sound
m
→
t
TV Speaker: Off, External Speaker: On
Speaker Settings
→
ENTER
→
E
N
●
TV Speaker: On, External Speaker: On
If there is no video signal, both speakers will be mute.
English
●
Auto Volume
To equalize the volume level on each channel, set to Normal.
Night: This mode provides an improved sound experience compared to
Normal mode, making almost no noise. It is useful at night.
To use the volume control on the source device connected to the TV,
N
set Auto Volume to Off on the TV. Otherwise, a change to the volume
control of the source device may not be applied.
◀ ▶
English
■Additional Settings
O
●
MENU
DTV Audio Level (digital channels only): This function allows you to reduce
the disparity of a voice signal (which is one of the signals received during a
digital TV broadcast) to a desired level.
According to the type of broadcast signal, MPEG / HE-AAC can be
N
adjusted between -10dB and 0dB.
To increase or decrease the volume, adjust between the range 0 and -10
N
respectively.
m
Sound
→
Additional Settings
→
ENTER
→
E
◀ ▶
English
●
Digital Audio Out: Digital Audio out is used to provide digital sound, reducing
interference going to speakers and various digital devices such as a DVD
player.
Audio Format: You can select the Digital Audio output format. The available
Digital Audio output format may differ depending on the input source.
By connecting to 5.1ch speakers in a Dolby Digital setup, maximize your
N
interactive 3D sound experience.
Audio Delay: Correct audio-video sync problems, when watching TV or
video, and when listening to digital audio output using an external device such
◀ ▶
as an AV receiver (0ms ~ 250ms).
English
●
Dolby Digital Comp: This function minimizes signal disparity between a dolby
digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
Select Line to obtain dynamic sound, and RF to reduce the difference
N
between loud and soft sounds at night time.
Line: Set the output level for signals greater or less than -31dB (reference) to
either -20dB or -31dB.
RF: Set the output level for signals greater or less than -20dB (reference) to
either -10dB or -20dB.
■Reset Sound
◀ ▶
MENU
O
Reset all sound settings to the factory defaults.
m
Sound
→
Reset Sound
→
English
ENTER
→
E
❑Selecting the Sound Mode
t
When you set to Dual I-II, the current sound mode is displayed on the screen.
Audio Type Dual I-II Default
A2 Stereo Mono Mono Automatic change
Stereo
Dual
NICAM Stereo Mono Mono Automatic change
Stereo
Dual
◀ ▶
If the stereo signal is weak and an automatic switching, occurs, then switch
N
Stereo ↔ Mono
Dual I ↔ Dual II
Mono ↔ Stereo
Mono → Dual I
Dual II
Dual I
Dual I
to the mono.
Only activated in stereo sound signal.
N
Only available when the Source is set to TV.
N
English
❑Executing initial setup
■Setup
MENU
O
Configure the channels and the time when setting up the TV for the first time or
when resetting the unit.
Execute the initial setup following instructions that the TV guides.
N
m
System
→
Setup
→
ENTER
→
E
◀ ▶
English
❑Setting the Time
■Time
O
The current time will appear every time you press the INFO button.
●
MENU
Clock: Setting the clock is for using various timer features of the TV.
If you disconnect the power cord, you have to set the clock again.
N
Clock Mode: Set up the current time manually or automatically.
m
System
→
Time
→
ENTER
→
E
◀ ▶
–
N
–
N
Auto: Set the current time automatically using the time from a digital
channel.
The aerial must be connected in order to set the time automatically.
Manual: Set the current time manually.
Depending on the broadcast station and signal, the auto time set up may
not be correct. In this case, set the time manually.
English
Clock Set: Set the Date and Time.
Available only when Clock Mode is set to Manual.
N
You can set the Date and Time directly by pressing the number buttons
N
on the remote control.
Time Zone (depending on the country): Select your time zone.
This function is only available when the Clock Mode is set to Auto.
N
When selecting Manual in Time Zone, GMT and DST will be activated.
N
Time Offset (UK only): Adjusts the time when your TV receives the time
◀ ▶
information via Internet. Set the right time by selecting an offset.
The current time will be set through a network, if the TV fails to receive
N
the time information including the broadcast signal from TV stations. (ex:
Watching TV via set-top box, Satellite receiver, or etc)
English
❑Using the Sleep Timer
O
●
MENU
Sleep Timer
time. (30, 60, 90, 120, 150 and 180 minutes)
Use the ▲/▼ buttons to select a period of time, and then press
N
ENTER
m
System
→
t
. To cancel the Sleep Timer, select Off.
E
Time
→
: Automatically shuts off the TV after a preset period of
Sleep Timer
→
ENTER
→
E
◀ ▶
English
❑Setting the On / Off Timer
MENU
O
●
On Timer: You can set up three separate On Timer configurations. (On Timer
1, On Timer 2, On Timer 3)
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or
Manual to set at your convenience. If you select Manual, you can set up the
day you want to activate the timer.
The
N
◀ ▶
Time: Set the hour and minute.
Volume: Set the desired volume level.
m
c
System
→
mark indicates the day you’ve selected.
Time
→
On Timer <or> Off Timer
→
ENTER
→
E
English
Source: To select the source of the content that will play when the TV turns
on. You can:
–
Select TV and have the TV display a specific air or cable channel.
–
Select USB and have the TV play back photo or audio files from a USB
device.
–
Select a source on your TV that you have connected a set-top box to, and
have the TV display a channel from the set-top box.
The USB device must be connected to your TV before you can select
N
USB.
◀ ▶
English
If you select a source other than TV or USB, you must:
N
●
Have a cable or satellite set-top box attached to that source
●
Set the set-top box to the channel you want to watch when the TV
goes on
●
Leave the set-top box turned on.
When you select a source other than TV or USB, the Aerial and Channel
N
options will disappear.
Aerial (when the Source is set to TV): Select ATV or DTV.
Channel (when the Source is set to TV): Select the desired channel.
◀ ▶
English
Music / Photo (when the Source is set to USB): Select a folder in the USB
device containing music or photo files to be played when the TV is turned on
automatically.
–
If there is no music file on the USB device or the folder containing a music
file is not selected, the timer function does not operate correctly.
–
When there is only one photo file in the USB device, the slide show will not
play.
–
If a folder name is too long, the folder cannot be selected.
–
Each USB you use is assigned its own folder. When using more than one
◀ ▶
of the same type of USB, make sure the folders assigned to each USB
have different names.
English
–
It is recommended that you use a USB memory stick and a multi card
reader when using On Timer.
–
The On Timer function may not work with USB devices with a built-in
battery, MP3 players, or PMPs made by some manufacturers because
these devices take a long time to be recognized.
●
Off Timer: You can set up three separate Off Timer configurations. (Off Timer
1, Off Timer 2, Off Timer 3)
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or
Manual to set at your convenience. If you select Manual, you can set up the
◀ ▶
day you want to activate the timer.
The
N
Time: Set the hour and minute.
mark indicates the day you’ve selected.
c
English
❑Economical Solutions
■Eco Solution
O
●
●
MENU
Energy Saving: This adjusts the brightness of the TV in order to reduce
power consumption.
Eco Sensor
settings will automatically adapt to the light in the room.
If you adjust the Backlight, the Eco Sensor will be set to Off.
N
m
System
→
for LED 5 series
Eco Solution
→
: To enhance your power savings; the picture
ENTER
→
E
◀ ▶
Min. Backlight: When Eco Sensor is On, the minimum screen brightness
can be adjusted manually.
If Eco Sensor is On, the display brightness may change (become slightly
N
darker or brighter) depending on the surrounding light intensity.
English
●
No Signal Power Off: To avoid unnecessary energy consumption, set how
long you want the TV to remain on if it’s not receiving a signal.
Disabled when the PC is in power saving mode.
N
●
Auto Power Off: The TV will be automatically turned off when no user
operation is received for 4 hours.
If the Auto Power Off option is set to Off, the TV will stay on even if no
N
operations are performed on the TV.
◀ ▶
English
❑Other Features
■Menu Language
MENU
O
Set the menu language.
m
System
→
Menu Language
→
ENTER
→
E
■Auto Protection Time
MENU
O
●
◀ ▶
If the screen remains idle with a still image for a certain period of time defined
by the user, the screen saver is activated to prevent the formation of ghost
images on the screen.
m
System
→
Auto Protection Time
→
ENTER
→
E
English
■General
MENU
O
●
Game Mode: When connecting to a game console such as PlayStation™ or
Xbox™, you can enjoy a more realistic gaming experience by selecting game
mode.
NOTE
N
●
◀ ▶
System
m
→
Precautions and limitations for game mode
–
To disconnect the game console and connect another external
device, set Game Mode to Off in the setup menu.
–
If you display the TV menu in Game Mode, the screen shakes
slightly.
General
→
ENTER
→
E
●
Game Mode is not available in TV mode.
●
After connecting the game console, set Game Mode to On.
Unfortunately, you may notice reduced picture quality.
English
●
If Game Mode is On:
–
●
Panel Lock: Lock or unlock all the keys on the panel.
●
Boot Logo: Display Samsung logo when the TV is turned on.
■Change PIN
Picture Mode is set to Standard and Sound Mode is set to
Movie.
MENU
O
Change your password required to set up the TV.
m
System
→
Change PIN
→
ENTER
→
E
◀ ▶
The PIN input screen appears before the setup screen.
N
Enter your 4-digit PIN. Change the PIN using the Change PIN option.
N
English
■DivX® Video On Demand
MENU
O
Shows the registration code authorized for the TV. If you connect to the DivX
web site and register with 10-digit registration code, you can download the VOD
activation file.
Once you play it using Videos, the registration is completed.
For more information on DivX® VOD, visit http://vod.divx.com.
N
m
System
→
DivX® Video On Demand
→
ENTER
→
E
◀ ▶
English
❑Using the Source List
■Source List
MENU
O
When you press the SOURCE button, Source screen will be displayed at
N
once.
You can only choose external devices that are connected to the TV. In
N
Source, connected inputs are highlighted.
◀ ▶
N
For the detailed information, refer to “Changing the Input Source” in User
Manual.
m
Applications
→
Source List
→
ENTER
→
E
English
❑Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing photo, music and movie files to the USB
port on the side of the TV.
3. When USB is connected to the TV, popup window appears. You can select
the Photos, Videos or Music directly.
◀ ▶
English
It might not work properly with unlicenced multimedia files.
N
Need-to-Know List before using Media Contents
N
●
MTP (Media Transfer Protocol) is not supported.
●
Supported file systems are FAT and NTFS.
●
Certain types of USB Digital camera and audio devices may not be
compatible with this TV.
●
Media Contents only supports sequential jpeg format.
●
Media Contents only supports USB Mass Storage Class (MSC) devices.
MSC is a Mass Storage Class Bulk-Only Transport device. Examples
◀ ▶
of MSC are Thumb drives, Flash Card Readers (USB HUB are not
supported). Devices should be connected directly to the TV’s USB port.
English
●
Before connecting your device to the TV, please back up your files to
prevent them from damage or loss of data. SAMSUNG is not responsible
for any data file damage or data loss.
●
The HDD (Hard Disk Drive) connected to USB is not supported.
●
Do not disconnect the USB device while it is loading.
●
The higher the resolution of the image, the longer it takes to display on
the screen.
●
The maximum supported JPEG resolution is 15360 x 8640 pixels.
●
For unsupported or corrupted files, the “Not Supported File Format”
◀ ▶
message is displayed.
●
The scene search and thumbnail functions are not supported in the
Videos.
English
●
MP3 files with DRM that have been downloaded from a non-free site
cannot be played. Digital Rights Management (DRM) is a technology that
supports the creation, distribution and management of the content in an
integrated and comprehensive way, including the protection of the rights
and interests of the content providers, the prevention of the illegal copying
of contents, as well as managing billings and settlements.
●
PTP connection mode is fully available only with digital cameras. When
connecting a smartphone or tablet to the TV using PTP mode, it may not
be recognized.
●
A USB device that requires high power (more than 500mA or 5V) may not
◀ ▶
be supported.
●
If the TV has been no input during time set in Auto Protection Time, the
screen saver will run.
English
●
The power-saving mode of some external hard disk drives may be
released automatically when connected to the TV.
●
If a USB extension cable is used, the USB device may not be recognized
or the files on the device may not be read.
●
If a USB device connected to the TV is not recognized, the list of files on
the device is corrupted or a file in the list is not played, connect the USB
device to the PC, format the device and check the connection.
●
If a file deleted from the PC is still found when Media Contents is run, use
the “Empty the Recycle Bin” function on the PC to permanently delete the
file.
◀ ▶
●
If the number of files and folders saved on a USB storage device is
approximately over 4000, the files and folders may not appear and some
folders may not be opened.
English
Disconnecting a USB Device
1. Press the SOURCE button.
2. Select a desired USB device, and then press the TOOLS button. The Tools
menu appears.
3. Select Disconnect USB Device, and then wait until the selected USB device
is disconnected. You can remove a USB device from the TV.
To remove a USB device from the TV, we recommend use Disconnect USB
N
Device function.
◀ ▶
English
❑Using the Media Contents
MENU
O
Enjoy photos, music and movie files saved on a USB Mass Storage Class (MSC)
device.
1. Press the MEDIA.P button.
2. Press
press the ENTER
3. Press
◄/►
◄/►
m
Applications
→
button to select desired menu (Photos, Videos, Music), then
button.
E
button to select desired device, then press the ENTER
Media Play
→
ENTER
→
E
E
button
◀ ▶
again.
4. Press the
ENTER
E
▲/▼/◄/►
button or
button to select the desired file in the list, then press the
∂
(Play) button.
English
Playing the selected files
1. Press the ▲ button to select Options at the top of each main screen and
select Play Selected.
2. Select the desired files.
The check box appears to the left of the selected files.
N
Press ENTER
N
3. Press the ▲ button to select Play.
You can select or deselect all files pressing the Select All / Deselect All.
N
button again to deselect the file.
E
◀ ▶
English
❑Playing the Photos / Videos / Music
During playing a file, press the
When the option menu is not displayed, press the TOOLS button or
N
N
N
ENTER
You can also use
playback.
If you press the INFO button during playback, you can view the playback
information.
button.
E
∂/∑/∫/π/µ
▲/▼/◄/►
button to select the desired menu.
buttons on the remote control during
◀ ▶
English
Playback menu
Button Operation Photos Videos Music
/
/
/
/
* When setting the Background Music to Mini Player in Photos, these buttons appear.
Start Slide Show / Stop Slide Show
Previous / Next
Play / Pause
Previous / Next
Rewind / Fast forward
Mini Player*
Mini Player*
●
●
● ●
● ●
● ●
◀ ▶
English
Setting menu
Photos
●
Button Operation
Slideshow Settings You can set the Speed and Effects during the slide show.
Zoom You can zoom into images in full screen mode.
Rotate You can rotate images in full screen mode.
Background Music /
Mini Player
◀ ▶
Settings Picture Mode / Sound Mode: You can adjust the picture or
You can set background music when watching a slide show. /
You can control simple playback menus.
sound setting.
Information: You can see detailed information about the played
file.
English
N
During the slide show, all files in the file list will be displayed in order.
N
N
●
When you press the
Show) in the file list, slide show will be started immediately.
During the slide show, you can adjust the slide show speed using
or
µ
Supported Photo Formats
N
(FF) button.
For the details, refer to “Specifications” in User Manual.
∂
(Play) button (or ▲ button
Options
→
Slide
→
π
(REW)
◀ ▶
English
●
Videos
Button Operation
Search Search Titles: You can move the other file directly.
Search Time Bar: You can search the video using ◄ and ► button
at one minute interval or entering the number directly.
NIt may not be supported depending on the input source.
Repeat Mode You can play movie files repeatedly.
Picture Size You can adjust the picture size to your preference.
Settings Subtitle Settings: You can play the video with subtitles. This function
◀ ▶
only works if the subtitles are the same file name as the video.
Picture Mode / Sound Mode: You can adjust the picture or sound
setting.
Audio Language: You can change the audio language if the video
has more than one language.
Information: You can see detailed information about the played file.
English
If video time information is unknown, play time and progress bar are not
N
displayed.
In this mode, you can enjoy movie clips contained on a Game, but you
N
cannot play the Game itself.
●
Supported Subtitle / Video Formats
For the details, refer to “Specifications” in User Manual.
N
◀ ▶
English
Music
●
Button Operation
Repeat You can play music files repeatedly.
Shuffle You can play the music randomly.
Sound Mode You can adjust the sound setting.
Only displays the files with supported music file extension. Other file
N
extensions are not displayed, even if they are saved on the same USB device.
If the sound is abnormal when playing music files, adjust the Equaliser in the
N
◀ ▶
Sound menu. (An over-modulated music file may cause a sound problem.)
●
Supported Music Formats
For the details, refer to “Specifications” in User Manual.
N
English
Setting the Encoding language
Set the encoding language if the text is not supported.
1. Press the ▲ button to select Options at the top of music main screen and
select Encoding.
2. Select the desired encoding language.
◀ ▶
English
❑Viewing the e-Manual
■
e-Manual
MENU
O
You can read the introduction and instructions about the TV features stored in
your TV.
For the detailed information about e-Manual Screen, refer to “How to use the
N
e-Manual” in User Manual.
m
Support
→
e-Manual
→
ENTER
→
E
◀ ▶
English
❑Using the Self Diagnosis
■Self Diagnosis
MENU
O
●
Self Diagnosis might take few seconds, this is part of the normal operation of
the TV.
●
Picture Test: Use to check for picture problems.
●
Sound Test: Use the built-in melody sound to check for sound problems.
If you hear no sound from the TV’s speakers, before performing the
◀ ▶
N
N
sound test, make sure Speaker Select is set to TV Speaker in the
Sound menu.
The melody will be heard during the test even if Speaker Select is set to
External Speaker or the sound is muted by pressing the MUTE button.
m
Support
→
Self Diagnosis
→
ENTER
→
E
English
●
Signal Information (digital channels only): HDTV channel’s reception quality
is either perfect or the channels are unavailable. Adjust your aerial to increase
signal strength.
●
Reset: Reset all settings to the factory defaults except network settings.
The PIN input screen appears before the setup screen.
N
Enter your 4-digit PIN. Change the PIN using the Change PIN option.
N
◀ ▶
English
❑Updating the Software
■Software Update
MENU
O
The Software Update menu lets you upgrade your TV’s software to the latest
version.
Current version: This is the software version already installed in the TV.
When software is upgraded, video and audio settings you have made will
N
return to their default settings. We advise you to write down your settings so
m
Support
→
Software Update
→
ENTER
→
E
◀ ▶
that you can easily reset them after the upgrade.
English
●
Update now
–
By USB: Insert a USB drive containing the firmware upgrade file,
downloaded from “www.samsung.com” into the TV.
Please be careful not to disconnect the power or remove the USB
N
drive until upgrades are complete. The TV will be turned off and on
automatically after completing the firmware upgrade.
–
By Channel: Upgrade the software using the broadcasting signal.
If the function is selected during the software transmission period,
N
software will be automatically searched and downloaded.
◀ ▶
The time required to download the software is determined by the
N
signal status.
●
Auto update: A manual upgrade will be automatically performed at selected
time. Since the power of the unit is turned on internally, the screen may be
turned on slightly for the product. This phenomenon may continue for more
than 1 hour until the software upgrade is complete.
English
❑Changing the Use Mode
■Use Mode
MENU
O
Select the Use Mode suitable for your place. We strongly recommend you select
Home Use.
●
Home Use: Home Use is the default setting.
●
Store Demo: Store Demo is for retail environments only. If you select Store
Demo, some functions will not work, and the picture settings will be reset
m
Support
→
Use Mode
→
ENTER
→
E
◀ ▶
every 30 minutes.
English
❑Viewing the Contact Samsung
■Contact Samsung
MENU
O
View this information when your TV does not work properly or when you want to
upgrade the software. You can find information regarding our call centres, and
how to download products and software.
m
Support
→
Contact Samsung
→
ENTER
→
E
◀ ▶
English
❑Using the Sports Mode
■Sports Mode
MENU
O
This mode provides optimized condition for watching sports games.
When the sports mode is on, the picture and sound modes are set to
N
Stadium automatically.
If you turn the TV off while watching Sports Mode, the Sports Mode will be
N
◀ ▶
disable.
m
t
Applications
→
Sports Mode
→
ENTER
→
E
English
❑Using the Satellite System
for LED 5070 series
For the details, you can find an additional web manual on our website "www.
N
samsung.com".
●
Auto Tuning
MENU
O
When Aerial Source is set to Satellite
◀ ▶
–
Channel Type: Select the Channel Type to memorise.
–
Satellite: Selects the satellite to scan. The option may differ depending on
country.
–
Scan Mode: Select a scan mode for the selected satellite.
–
Re-initialise: Selects the scanning mode of the selected satellite.
This function is available after connecting to satellite aerial and set
N
the channels.
m
Broadcasting
→
Auto Tuning
→
ENTER
→
E
–
Search Mode: Sets search mode using up/down buttons.
English
●
Manual Tuning
MENU
O
ENTER
Scan Satellite
Transponder: Selects the transponder using the up/down buttons.
Scan Mode: Selects either free or all channels to store.
Network Search: Select to search network or not.
Signal Quality: Display the current status of broadcasting signal.
m
E
Broadcasting
→
Channel Settings
→
Manual Tuning
→
→
◀ ▶
Information on a satellite and its transponder is subject to change
N
depending on the broadcasting conditions.
N
When setting is completed, move to Search and press the ENTER
button. Channel scan is started.
English
E
●
Satellite System
MENU
O
ENTER
The PIN input screen appears. Enter your 4 digit PIN number. Satellite
System is available when Aerial is set to Satellite. Before running Auto
Tuning, set Satellite System. Then channel scan is run normally.
●
Satellite Selection: You can choose the satellites for this TV.
●
LNB Power: Enables or disables the power supply for the LNB.
m
E
Broadcasting
→
Channel Settings
→
Satellite System
→
→
◀ ▶
English
●
LNB Settings: Configures the outdoor equipment.
It is available when LNB Power is set to On.
N
Satellite: Selects the satellite for receiving digital broadcasts.
Transponder: Selects a transponder from the list or adds a new
transponder.
DiSEqC Mode: Selects DiSEqC mode for the selected LNB.
Lower LNB Oscillators: Sets the LNB oscillators to a lower frequency.
Upper LNB Oscillators: Sets the LNB oscillators to a higher frequency.
◀ ▶
Tone 22 kHz: Selects the Tone 22 kHz depending on the LNB type. For a
universal LNB it should be Auto.
Signal Quality: Display the current status of broadcasting signal.
English
Loading...