Samsung UBD-M7500 operation manual
FULL MANUAL
UBD-M7500
Imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at www.samsung.com/register
Safety Information
Warning
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE THE COVER (OR BACK). THERE ARE NO USER SERVICEABLE
PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
Class II product : This symbol
indicates that it does not require
a safety connection to electrical
earth (ground).
AC voltage : This symbol
indicates that the rated voltage
marked with the symbol is AC
voltage.
DC voltage : This symbol
indicates that the rated voltage
marked with the symbol is DC
voltage.
Caution, Consult instructions
for use : This symbol instructs
the user to consult the user
manual for further safety related
information.
This symbol indicates that high voltage is
present inside. It is dangerous to make any
kind of contact with any internal part of this
product.
This symbol indicates that important
literature concerning operation and
maintenance has been included with this
product.
• The slots and openings in the cabinet and in
the back or bottom are provided for necessary
ventilation. To ensure reliable operation of this
apparatus, and to protect it from overheating,
these slots and openings must never be
blocked or covered.
- Do not place this apparatus in a confined
space, such as a bookcase, or built-in
cabinet, unless proper ventilation is provided.
- Do not place this apparatus near or over a
radiator or heat register, or where it is exposed
to direct sunlight.
- Do not place vessels (vases etc.) containing
water on this apparatus. A water spill can
cause a fire or electric shock.
• Do not expose this apparatus to rain or place it
near water (near a bathtub, washbowl, kitchen
sink, or pool, etc.). If this apparatus accidentally
gets wet, unplug it and contact an authorised
Samsung dealer or service centre immediately.
• This apparatus uses batteries. In your
community, there might be environmental
regulations that require you to dispose of these
batteries properly. Please contact your local
authorities for disposal or recycling information.
2 English
• Do not overload wall outlets, extension cords or
adaptors beyond their capacity, since this can
result in fire or electric shock.
• Route power-supply cords so that they are
not likely to be walked on or pinched by items
placed on or against them. Pay particular
attention to cords at the plug end, at wall
outlets, and the point where they exit from the
apparatus.
• To protect this apparatus from a lightning storm,
or when it is left unattended and unused for
long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable
system. This will prevent damage to the set due
to lightning and power line surges.
• Before connecting the AC power cord to the
DC adaptor outlet, make sure the voltage
designation of the DC adaptor corresponds to
the local electrical supply.
• Never insert anything metallic into the open
parts of this apparatus. Doing so may create a
danger of electric shock.
• To avoid electric shock, never touch the inside
of this apparatus. Only a qualified technician
should open this apparatus.
• Make sure to plug the power cord in until it is
firmly seated. When unplugging the power cord
from a wall outlet, always pull on the power
cord's plug. Never unplug by pulling on the
power cord. Do not touch the power cord with
wet hands.
• If this apparatus does not operate normally in particular, if there are any unusual sounds or
smells coming from it - unplug it immediately
and contact an authorised Samsung dealer or
service centre.
• Maintenance of Cabinet.
- Before connecting other components to this
product, be sure to turn them off.
- If you move your product suddenly from a
cold place to a warm place, condensation
may occur on the operating parts and lens
and cause abnormal disc playback. If this
occurs, unplug the product, wait for two
hours, and then connect the plug to the
power outlet. Then, insert the disc, and try to
play back again.
• Be sure to pull the power plug out of the outlet
if the product is to remain unused or if you are
leaving the house for an extended period of time
(especially when children, elderly, or disabled
people will be left alone in the house).
- Accumulated dust can cause an electric
shock, an electric leakage, or a fire by causing
the power cord to generate sparks and heat
or the insulation to deteriorate.
• Contact an authorised service Centre for
information if you intend to install your
product in a location with heavy dust, high
or low temperatures, high humidity, chemical
substances, or where it will operate 24 hours
a day such as in an airport, a train station, etc.
Failing to do so may lead to serious damage of
your product.
• Use only a properly grounded plug and wall
outlet.
- An improper ground may cause electric shock
or equipment damage. (Class 1 Equipment
only.)
• To turn this apparatus off completely, you must
disconnect it from the wall outlet. Consequently,
the wall outlet and power plug must be readily
accessible at all times.
01 Safety Information
3 English
Safety Information
• Do not allow children to hang on the product.
• Store the accessories (battery, etc.) in a location
safely out of the reach of children.
• Do not install the product in an unstable location
such as a shaky self, a slanted floor, or a
location exposed to vibration.
• Do not drop or strike the product. If the product
is damaged, disconnect the power cord and
contact a Samsung service centre.
• To clean this apparatus, unplug the power cord
from the wall outlet and wipe the product using
a soft, dry cloth. Do not use any chemicals such
as wax, benzene, alcohol, thinners, insecticide,
air fresheners, lubricants, or detergent. These
chemicals can damage the appearance of the
product or erase the printing on the product.
• Do not expose this apparatus to dripping or
splashing. Do not put objects filled with liquids,
such as vases on the apparatus.
• Do not dispose of batteries in a fire.
• Do not plug multiple electric devices into the
same wall socket. Overloading a socket can
cause it to overheat, resulting in a fire.
• There is danger of an explosion if you replace
the batteries used in the remote with the wrong
type of battery. Replace only with the same or
equivalent type.
• WARNING - TO PREVENT THE
SPREAD OF FIRE, KEEP CANDLES
AND OTHER ITEMS WITH OPEN
FLAMES AWAY FROM THIS
PRODUCT AT ALL TIMES.
• WARNING
- To reduce the risk of fire or electric shock, do
not expose this appliance to rain or moisture.
CLASS 1 LASER product
This Compact Disc player is classified as a CLASS
1 LASER product. Use of controls, adjustments
or performance of procedures other than those
specified herein may result in hazardous radiation
exposure.
CAUTION :
• THIS PRODUCT USES AN INVISIBLE LASER
BEAM WHICH CAN CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED. BE
SURE TO OPERATE PRODUCT CORRECTLY
AS INSTRUCTED.
• THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVERS AND DO
NOT REPAIR YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.
This product satisfies CE regulations when
shielded cables and connectors are used to
connect the unit to other equipment. To prevent
electromagnetic interference with electric
appliances, such as radios and televisions, use
shielded cables and connectors for connections.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LÁSER CLASE 1
| NOTE |
\If the Region number of an Ultra HD Blu-ray
Disc/Blu-ray Disc/DVD does not correspond to
the Region number of this product, the product
cannot play the disc.
4 English
IMPORTANT NOTE
The mains lead on this equipment is supplied with
a molded plug incorporating a fuse. The value of
the fuse is indicated on the pin face of the plug.
If it requires replacing, a fuse approved to BS1362
of the same rating must be used.
Never use the plug with the fuse cover omitted
if the cover is detachable. If a replacement fuse
cover is required, it must be of the same colour as
the pin face of the plug. Replacement covers are
available from your dealer.
If the fitted plug is not suitable for the power points
in your house or the cable is not long enough to
reach a power point, you should obtain a suitable
safety approved extension lead or consult your
dealer for assistance.
However, if there is no alternative to cutting off the
plug, remove the fuse and then safely dispose of
the plug. Do not connect the plug to a mains jack,
as there is a risk of shock hazard from the bared
flexible cord.
To disconnect the apparatus from the mains, the
plug must be pulled out from the mains socket,
therefore the mains plug shall be readily operable.
The product unit accompanying this user manual
is licenced under certain intellectual property rights
of certain third parties.
01 Safety Information
5 English
Contents
SAFETY INFORMATION
2 Warning
GETTING STARTED
8 Accessories
9 Front Panel
9 Rear Panel
10 Remote Control
10 Tour of the Remote Control
CONNECTIONS
12 Connecting to a TV
14 Connecting to an Audio Device
14
15 Method 2 Connecting to a Soundbar /
15 Connecting to a Network
15 Wired Network
Method 1 Connecting to an HDMI (HDR)
compatible Soundbar / AV receiver that
supports pass through
AV receiver with a Digital Optical Cable
SETTINGS
16 The Initial Settings Procedure
16 The Home Screen
17 Accessing the Settings Screen
17 Buttons on the Remote Control Used for
the Settings Menu
18 Settings Menu Functions
18 Picture
18 Sound
19 General
20 Support
21 Networks and the Internet
21 Configuring Your Network Connection
22 Upgrading Software
23 Update Now
23 Auto Update
6 English
MEDIA PLAY
NETWORK SERVICES
24 Playing Commercial Discs
24 Disc Storage & Management
24 Playing Photos, Videos, and Music
(Multimedia)
24 Playing Media Content Saved on a USB
Device
25 Playing Media Content Saved in a
Computer
25 Playing a Disc with User Recorded Content
26 Controlling Video Playback
26 Buttons on the Remote Control used for
Video Playback
27 Using the On-screen Menu during
Playback of a Video
29 Using the Sort By & Options Menus
29 Controlling Music Playback
29 Buttons on the Remote Control used for
Music Playback
30 Using the Options Menu During Playback
30 Using the Sort By & Options Menus on a
File Screen
30 Repeating Tracks on an Audio CD
30 Shuffling Tracks on an Audio CD
30 Creating a Playlist from an Audio CD
31 Playing Photo Contents
31 Using the On-screen Menu during
Playback of a Photo File
32 Using the Sort By & Options Menus
33 Creating a Samsung Account
34 Before Using Apps
34 Using Apps
34 The APPS Screen at a Glance
35 Starting an Application
36 Using the Internet
37 The Web Browser window at a Glance
39 Using the Browser Menu
40 Linking Your Internet Service Accounts to
the Product
40 BD-LIVE™
APPENDIX
41 Additional Information
41 Notes
43 Resolution according to the contents type
44 Digital Output Selection
45 Troubleshooting
48 Disc and Format Compatibility
48 Disc types and contents your product can
play
48 Disc types your product cannot play
49 Region Code
49 Logos of Discs the product can play
50 Supported Formats
54 Compliance and Compatibility Notice
55 Copy Protection
55 Network Service Disclaimer
56 Licences
58 Specifications
Contents
7 English
Getting Started
Accessories
Check for the supplied accessories shown below.
Batteries (AA Size)
Power Cable
User Manual Remote Control
TV
DISC
MENU
POP UP
123
/MENU
TOOLS
8 English
Front Panel
STOP BUTTON
OPEN/CLOSE BUTTON
POWER INDICATOR
Red: Power off
Green: Power on
Green blinking: Remote control or Front Key
PLAY/PAUSE
BUTTON
POWER BUTTON
input, Software update.
POWER
POWER
REMOTE CONTROL
USB HOSTDISC TRAY
SENSOR
| NOTES |
\To upgrade the product's software through the USB HOST jack, you must use a USB memory stick.
\When the product displays an Ultra HD Blu-ray or standard Blu-ray Disc's menu, you cannot start the
movie by pressing the p button on the remote control or player. To play the movie, you must select
Play Movie or Start in the disc's menu, and then press the (OK) button on the remote control.
Rear Panel
POWER
OPTICAL
DIGITAL
AUDIO OUT
MAIN
LAN
HDMI OUT
02 Getting Started
POWER
OPTICAL
DIGITAL
AUDIO OUT
LAN
MAIN
HDMI OUT
HDMI OUTLANPOWER DIGITAL AUDIO OUT
| NOTE |
\To use the Anynet+ (HDMI-CEC) function, connect an HDMI cable to the HDMI terminal.
9 English
Getting Started
Remote Control
| NOTE |
\Previous BD-Player remote controls may not be compatible with this player.
Tour of the Remote Control
Turns the TV o n and off.
Turns the playe r on and off.
Press to op en and close the disc tray.
TV
TV volume adjustment.
After setup, allows you to set the input
source o n your TV.
Use to display the number, colour or
information keypad on th e screen.
The colour buttons are used both for
menus on the player and also several Ultra
HD Blu-ray Disc or Blu-ray Disc functions.
(OK) : Us e to select menu items.
Move the cursor up, down, lef t, or right.
(Up/Down/Left/Right) :
Return to the previous me nu.
Display the home screen.
DISC
MENU
123
POP UP
/MENU
TOOLS
Use to enter the disc menu.
Use to enter the Popup menu.
Press to use the Tools menu.
Press to play disc or files.
or
Press to pause playing.
Press to se arch backwards or forwards.
Press to sk ip chapters.
Press to stop a disc or file.
Inserting Batteries (AA Battery x2)
Slide the battery cover in the direction of the arrow until it is completely removed.
Insert 2 AA batteries (1.5V) in the correct +/- polarity configuration. Slide the battery cover back into
position.
10 English
Using Remote Control Buttons to Enter
POP UP
/MENU
DISC
MENU
TOOLS
123
TV
TV Codes
1. Press and hold the
(TV Power) button.
2. While holding the
(TV Power) button,
press the buttons on the
remote that correspond to
a two-digit TV Code from
the list below. Use the
illustration to the right as a
guide.
For example: To enter 01, press the TOOLS
button and then press the 123 button. Note
that some TV brands have more than one
2-digit code. If the first code does not work,
try the next.
2
1
3
4
5
6
7
8
0
9
TV Control Codes
Brand Codes
SAMSUNG 01, 02, 03, 04, 05, 06, 07, 08, 09
AIWA 82
ANAM 10, 11, 12, 13, 14, 15, 16, 17, 18
BANG & OLUFSEN
BLAUPUNKT 71
BRANDT 73
BRIONVEGA 57
CGE 52
CONTINENTAL
EDISON
DAEWOO
EMERSON 64
FERGUSON 73
FINLUX 06, 49, 57
FORMENTI 57
FUJITSU 84
GRADIENTE 70
GRUNDIG 49, 52, 71
HITACHI 60, 72, 73, 75
IMPERIAL 52
JVC 61, 79
LG
57
75
19, 20, 23, 24, 25, 26, 27, 28, 29,
30, 31, 32, 33, 34
06, 19, 20, 21, 22, 78
Brand Codes
LOEWE 06, 69
LOEWE OPTA
MAGNAVOX
METZ 57
MITSUBISHI 06, 48, 62, 65
MIVAR 52, 77
NEC 83
NEWSAN 68
NOBLEX 66
NOKIA 74
NORDMENDE
PANASONIC 13, 53, 54, 74, 75
PHILIPS 06, 56, 57
PHONOLA 72, 73, 75
PIONEER 58, 59, 73, 74
RADIOLA 06, 56
RADIOMARELLI 57
RCA 45, 46
REX 74
SABA 57, 72, 73, 74, 75
SALORA 74
SANYO 41, 42, 43, 44, 48
SCHNEIDER 06
SELECO 74
SHARP 36, 37, 38, 39, 48
SIEMENS 71
SINGER 57
SINUDYNE 57
SONY 35, 48
TELEAVA 73
TELEFUNKEN
THOMSON 72, 73, 75
THOMSON ASIA 80, 81
TOSHIBA
WEGA 57
YOKO 06
ZENITH 63
06, 57
40
72, 73, 75
67, 73, 75, 76
47, 48, 49, 50, 51, 52
02 Getting Started
11 English
Connections
LAN
OPTICAL
DIGITAL
AUDIO OUT
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI
IN jack on your TV.
- Do not connect the power cord to the wall outlet until you have made all the other connections.
- When you change the connections, turn off all devices before you start.
MAIN
( )
OPTICAL
DIGITAL
AUDIO OUT
LAN HDMI OUT
MAIN
( )
POWER
Audio
Video
| NOTES |
\Optimum picture quality is automatically obtained (HDMI UHD Color - On) when the player is
connected to a Samsung UHD TV.
\To use the Anynet+ (HDMI-CEC) function, connect the HDMI cable to the HDMI terminal.
\If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the
DIGITAL AUDIO OUT on the product to an audio system to hear audio.
\An HDMI to HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
\Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual
of your TV.
\When you connect the product to your TV using an HDMI cable or to a new TV, and then turn it on for
the first time, the product automatically sets the HDMI output resolution to the highest supported by
the TV.
\A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.
\To view video in the HDMI 720p, 1080p or 2160p output mode, you must use a high speed (category 2)
HDMI cable.
HDMI OUT
12 English
\HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears
on the screen.
\If your TV does not support HDCP (High-bandwidth Digital Content Protection) version 2.2, some of
Ultra HD Blu-ray titles may play at the 1080p resolution.
- This operation is regulated by the Ultra HD Blu-ray Disc content's copyright protection standard
according to the producer's intention to avoid infringing the copyright.
- To view video from a Ultra HD Blu-ray Disc at its original resolution, connect the HDMI cable to an
HDMI input port on the TV that supports HDCP 2.2.
- To check whether the TV supports HDCP 2.2, check the HDMI port on the back of the TV or refer
to the TV user's manual.
\This product supports the HDR function. (HDR: High Dynamic Range is a technique used to reproduce
a greater dynamic range of luminosity than is possible with conventional imaging devices.)
- To take advantage of the HDR function, you need HDR content, a TV supporting HDR, and a highspeed HDMI cable.
- Connect the player to an HDMI input terminal on the TV that supports the HDR function using the
high speed HDMI cable.
- Use the TV's menu to activate the HDR related function. For further information, refer to the TV's
user manual.
03 Connections
13 English
Connections
Connecting to an Audio Device
You can connect this product to an audio system using the methods illustrated below.
- Do not connect the power cord to the wall outlet until you have made all the other connections.
- When you change the connections, turn off all devices before you start.
Method 1 Connecting to an HDMI (HDR) compatible Soundbar / AV receiver that supports
pass through
• Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the
HDMI IN jack on your receiver. Connect another HDMI cable from the HDMI OUT jack of your receiver
to the HDMI IN jack of your TV.
- Your receiver must have 4K pass through capability to pass through UHD video content.
MAIN
( )
HDMI OUT
Audio/Video
Soundbar / AV receiver
OPTICAL
DIGITAL
AUDIO OUT
LAN HDMI OUT
MAIN
( )
POWER
Video
| NOTES |
\You must set up HDMI UHD Color to enable HDR on your Samsung TV manually if your player is not
directly connected to the TV. (For example, through a Soundbar or AV receiver.)
\If AACS 2.0 was applied to the contents that you want to play, the contents may not be displayed on the
screen depending on the AV receiver connected. For more detailed information, refer to the user manual
of your AV receiver.
14 English
Method 2 Connecting to a Soundbar /
POWER
LAN HDMI OUT
MAIN
( )
OPTICAL
DIGITAL
AUDIO OUT
LAN
HDMI OUT
MAIN
( )
OPTICAL
DIGITAL
AUDIO OUT
AV receiver with a Digital Optical Cable
• Using a digital Optical cable (not supplied),
connect the DIGITAL AUDIO OUT jack on the
product to the DIGITAL AUDIO IN jack of the
receiver.
• You will hear sound only through the front two
speakers with Digital Output set to PCM.
Audio
Connecting to a Network
You can connect your product to your network.
Only a wired connection is supported.
Wired Network
Router or wall connection
OPTICAL
DIGITAL
AUDIO OUT
LAN HDMI OUT
LAN
MAIN
( )
POWER
| NOTES |
\Your router or your Internet Service Provider's
policies may prevent the product from
accessing Samsung's software update server.
If this occurs, contact your Internet Service
Provider (ISP) for more information.
\DSL users, please use a router to make a
network connection.
\Use Cat 7 (*STP Type) cable for the connection.
(* Shielded Twist Pair)
03 Connections
Soundbar / AV receiver
| NOTE |
\If you connect a receiver to the player's DIGITAL
AUDIO OUT port, receiver’s audio reproduction
may not synchronise with that of the TV.
15 English
Settings
The Initial Settings Procedure
• The Home screen will not appear if you do
not configure the initial settings.
• The OSD (On Screen Display) may change in
this product after you upgrade the software
version.
• The access steps may differ depending on
the menu you selected.
After you have connected the product to your
TV, turn on the TV and product. When you turn
on the product the first time, the product's Initial
Settings screen appears on the TV. The Initial
Settings procedure lets you set the On Screen
Display (OSD) and menu languages, the aspect
ratio (screen size), and network configuration,
and connect the player to the Internet. Follow the
directions on the screen.
| NOTES |
\If you skip Network Setup during the Initial
Settings procedure, you can configure your
network settings later. See "Configuring Your
Network Connection" on pages 21~22 for
instructions.
\If you want to display the Initial Settings screen
again and make changes, select Settings >
General > Start Setup in the Home screen or
select Settings > Support > Reset. (See page
20)
\If you want to use the Anynet+ (HDMI-CEC)
function, please follow the instructions below.
1) Connect the product to an Anynet+ (HDMI-
CEC)-compliant Samsung TV using an HDMI
Cable.
2) Set the Anynet+ (HDMI-CEC) feature to On
in both the TV and the product.
3) Set the player to the Initial Settings
Procedure.
The Home Screen
Disc
1 2 3 4 5
(Functions)
• Settings : Opens the product’s
menu. In the menu, you can set
various functions to suit your personal
preferences. When you move focus
to the Settings menu, the Quick
Settings menu appears. Use the menu
to customise various options, such as
Picture Mode, Fit Screen Size, Sound
Output, Audio Output Format, and
1
Network.
• Source : Select an inserted disc or
USB storage device, or a connected
network device.
• Search : Lets you search for content
in Apps and YouTube by entering
corresponding search words.
• APPS : Access various for pay or
free-of-charge applications.
Disc : Displays the selected source.
2
Downloaded Apps : Displays downloaded
apps. Apps displayed here can be deleted,
3
edited, or rearranged, if necessary.
You can access the Internet.
4
Use the Add to Home option to add
frequently used menu items to the bottom
5
of the Home screen.
Internet InternetApp1 App2 App3
16 English
| NOTE |
POP UP
/MENU
DISC
MENU
TOOLS
123
TV
\If you leave the player in the stop mode for more
than 5 minutes without using it, a screen saver
will appear on your TV. If the player is left in the
screen saver mode for more than 15 minutes,
the power will automatically turn off.
Accessing the Settings Screen
1. Select Settings on the Home screen, and
then press (OK) button. The Settings
screen appears.
Buttons on the Remote Control Used for the Settings Menu
04 Settings
1
2
3
4
Picture
Sound
General
Support
Picture
TV Aspect Ratio 16:9 Original
Resolution Auto
Movie Frame (24p/25p)
Fit Screen Size Size 4 (100%)
HDMI Colour Format Auto
HDMI Deep Colour Off
HDR to SDR Middle Gamma
2. To access the menus, sub-menus, and
options on the Settings screen, please refer
to the remote control illustration in the next
column.
(OK) button : Press to activate the
currently selected item or confirm a
1
setting.
(Up/Down/Left/Right) buttons : Press
2
to move the cursor or select an item.
(Return) button : Press to return to the
3
previous menu.
(Home) button : Press to move to the
4
Home screen.
Detailed Function Information
Each Settings function, menu item, and individual
option is explained in detail on-screen. To view an
explanation, use the Up/Down/Left/Right buttons
to select the function, menu item, or option.
The explanation will usually appear on the right
side of the screen.
A short description of each Settings function
starts on the next page. Additional information on
some of the functions is also in the Appendix of
this manual.
17 English
Settings
Settings Menu Functions
Picture
TV Aspect Ratio
Lets you adjust the output of the product to the
screen size and screen format of your TV.
Resolution
Set the output resolution of the HDMI video signal
to Auto, 2160p, 1080p, 720p, or 576p/480p.
The number indicates the number of lines of video
per frame. Generally, the more lines, the higher the
quality.
Movie Frame (24p/25p)
If the product is connected to a 24p/25p
compatible TV, setting the Movie Frame (24p/25p)
feature to Auto lets the product adjust its HDMI
output to 24 frames per second automatically for
improved picture quality.
•
You can enjoy the Movie Frame (24p/25p)
feature only on a TV supporting this frame rate.
•
The Movie Frame (24p/25p) feature becomes
active only if the player is playing 24 frame rate
contents.
•
Movie Frame is only available when the
product is in the HDMI 1080p or 2160p output
resolution modes.
Fit Screen Size
Set the screen to the optimal size.
HDMI Colour Format
Lets you set the colour space format for the HDMI
output so that it matches the capabilities of the
connected device (TV, monitor, etc). The screen
goes black momentarily after you have selected a
format.
HDMI Deep Colour
Lets you set the product to output HDMI video
with Deep Colour. Deep Colour provides more
accurate colour reproduction with greater colour
depth.
HDR to SDR
Lets you set the gamma level when watching
video converted from HDR to SDR.
Sound
Sound Output
Lets you select which speakers are active. Select
an audio device from the list.
Audio Output Format
Lets you select the digital audio output format
(HDMI) that is suitable for your AV Receiver.
| NOTE |
\If the player is connected to an ATMOS
Soundbar with Auto on, the sound option
automatically switches to Bitstream.
Audio Output Format (Optical)
Lets you select the digital audio output format
(Optical) that is suitable for your AV Receiver.
PCM Downsampling
Lets you choose to have 96kHz PCM signals
downsampled to 48kHz before they are outputted
to an amplifier. Turn on PCM Downsampling if
the amplifier or receiver is not compatible with
96kHZ signal.
18 English
Dynamic Range Control
Lets you apply dynamic range control to Dolby
Digital, Dolby Digital Plus, and Dolby TrueHD
audio.
Auto : Automatically controls the dynamic range
of Dolby TrueHD audio, based on information
in the Dolby TrueHD soundtrack. Also turns
dynamic range control on for Dolby Digital and
Dolby Digital Plus.
Off : Leaves the dynamic range uncompressed,
letting you hear the original sound.
On : Turns dynamic range control on for all three
Dolby formats. Quieter sounds are made louder
and the volume of loud sounds is reduced.
Downmixing Mode
Lets you select the multi-channel downmix method
that is compatible with your stereo system.
You can choose to have the product downmix to
normal stereo or to surround compatible stereo.
DTS Neo:6 Mode
You can enjoy multichannel sound via HDMI
output from a 2 channel audio source.
Audio Sync
In some cases, when the product is connected to
a digital TV, the audio signal may not synchronise
with the video signal. If this occurs, adjust the
audio delay time to match the video signal.
•
You can set the audio delay time between 0 ms
and 240 ms. Adjust it to the optimal setting.
| NOTES |
\The audio delay time you specify may not be
exact depending on the content played.
\This function can be used when playing
Optical Disc format contents.
General
Network
Network Status : Lets you check the current
network and Internet status.
Network Settings : Configure the network
connection so you can enjoy various features
such as Internet services, and perform Software
Updates.
BD-Live Settings :
functions. BD-Live allows you to access extra
features available on some Ultra HD Blu-ray
Discs or Blu-ray Discs if you are connected to
the Internet.
•
BD-Live Internet Connection : Lets you
fully allow, partly allow, or prohibit a BD-Live
Internet connection.
•
BD Data Management : Manage BD data
downloaded from a BD-Live service or
Ultra HD Blu-ray Disc/Blu-ray Disc.
| NOTE |
\To use the BD-Live Settings function,
connect a USB storage device first, and then
select it from the BD Data Management
menu.
System Manager
You can change the options listed below to match
your preferences.
Language : You can select the language you
prefer for the On-screen menu, disc menu,
audio, subtitles, etc.
•
The language you select for the disc menu,
disc audio, or subtitles will only appear if it is
supported on the disc.
Device Name : Lets you input a name for the
product that will identify it on your network.
View Notifications : You can view the list of
event messages generated by the player.
Set various BD-Live
04 Settings
19 English
Loading...