Samsung UBD-M7500 User Manual

FULL MANUAL

UBD-M7500

Imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at www.samsung.com/register

Safety Information

Warning

CAUTION

RISK OF ELECTRIC SHOCK. DO NOT OPEN.

CAUTION : TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE THE COVER (OR

BACK). THERE ARE NO USER SERVICEABLE

PARTS INSIDE. REFER ALL SERVICING TO

QUALIFIED PERSONNEL.

Class II product : This symbol indicates that a safety connection to electrical earth (ground) is not required.

AC voltage : Rated voltage marked with this symbol is AC voltage.

DC voltage : Rated voltage marked with this symbol is DC voltage.

Caution. Consult instructions for use : This symbol instructs the user to consult the user manual for further safety related information.

• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus, and to protect it from over heating, these slots and openings must never be blocked or covered.

- Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided.

- Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.

- Do not place vessels (vases etc.) containing water on this apparatus. A water spill can cause a fire or electric shock.

This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.

This symbol indicates that important literature concerning operation and maintenance has been included with this product.

• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or pool, etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized Samsung dealer or service center immediately.

• This apparatus uses batteries. In your community, there might be environmental regulations that require you to dispose of these batteries properly. Please contact your local authorities for disposal or recycling information.

• Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in fire or electric shock.

• Route power-supply cords so that they are not likely to be walked on or pinched by items placed on or against them. Pay particular attention to cords at the plug end, at wall outlets, and the point where they exit from the apparatus.

• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.

• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local electrical supply.

• Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.

• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.

2 English

• Make sure to plug the power cord in until it is firmly seated. When unplugging the power cord from a wall outlet, always pull on the power cord's plug. Never unplug by pulling on the power cord. Do not touch the power cord with wet hands.

• If this apparatus does not operate normally in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized Samsung dealer or service center.

• Maintenance of Cabinet.

- Before connecting other components to this product, be sure to turn them off.

- If you move your product suddenly from a cold place to a warm place, condensation may occur on the operating parts and lens and cause abnormal disc playback. If this occurs, unplug the product, wait for two hours, and then connect the plug to the power outlet. Then, insert the disc, and try to play back again.

• Be sure to pull the power plug out of the outlet if the product is to remain unused or if you are leaving the house for an extended period of time (especially when children, elderly, or disabled people will be left alone in the house).

- Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat or the insulation to deteriorate.

• Contact an authorized service center for information if you intend to install your product in a location with heavy dust, high or low temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such as in an airport, a train station, etc. Failing to do so may lead to serious damage to your product.

• Use only a properly grounded plug and wall outlet.

- An improper ground may cause electric shock or equipment damage. (Class 1 Equipment only)

• To turn this apparatus off completely, you must disconnect it from the wall outlet. Consequently, the wall outlet and power plug must be readily accessible at all times.

• Do not allow children to hang on the product.

• Store the accessories (battery, etc.) in a location

safely out of the reach of children.

• Do not install the product in an unstable location such as a shaky self, a slanted floor, or a location exposed to vibration.

• Do not drop or strike the product. If the product is damaged, disconnect the power cord and contact a Samsung service center.

• To clean this apparatus, unplug the power cord from the wall outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air fresheners, lubricants, or detergent. These chemicals can damage the appearance of the product or erase the printing on the product.

• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the apparatus.

• Do not dispose of batteries in a fire.

• Do not plug multiple electric devices into the

same wall socket. Overloading a socket can cause it to overheat, resulting in a fire.

• There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery. Replace only with the same or equivalent type.

• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES AND OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

• WARNING

- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

- To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

01 Safety Information

3 English

Safety Information

FCC NOTE (for U.S.A)

Class B FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorienting or relocating the receiving antenna.

• Increasing the separation between the

equipment and receiver.

• Connecting the equipment to an outlet that is on a different circuit than the radio or TV.

• Consulting the dealer or an experienced radio/ TV technician for help.

This class B digital product meets all requirements of the Canadian Interference - Causing Equipment Regulations.

FCC Caution :

• Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

• This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections.

CLASS 1 LASER product

This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Complies with 21CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.

DANGER :

• VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. (FDA 21 CFR)

CAUTION :

• CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO THE BEAM. (IEC 60825-1)

• THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN THE COVER. DO NOT REPAIR THE PRODUCT YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LÁSER CLASE 1

| NOTE |

\If the Region number of an Ultra HD Blu-ray

Disc/Blu-ray Disc/DVD does not correspond to the Region number of this product, the product cannot play the disc.

4 English

Precautions

Important Safety Instructions

Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install

in accordance with the manufacturer's instructions.

8. Do not install near any heat sources such

as radiators, heat registers, stoves, or other apparatus (including AV receivers) that produce heat.

9. Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on

or pinched particularly at plugs, convenience receptacles, and the point where it exits the apparatus.

11. Only use attachments/accessories specified

by the manufacturer.

12. Use only with the cart,

stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms

or when unused for long periods of time.

14. Refer all servicing to qualified service

personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

01 Safety Information

5 English

Contents

SAFETY INFORMATION

2 Warning

5 Precautions

5 Important Safety Instructions

GETTING STARTED

8 Accessories

9 Front Panel

9 Rear Panel

10 Remote Control

10 Tour of the Remote Control

CONNECTIONS

12 Connecting to a TV

14 Connecting to an Audio Device

14 Method 1 Connecting to an HDMI (HDR)

compatible Soundbar / AV receiver that supports pass through

15 Method 2 Connecting to a Soundbar /

AV receiver with a Digital Optical Cable

15 Connecting to a Network

15 Wired Network

SETTINGS

16 The Initial Settings Procedure

16 The Home Screen

17 Accessing the Settings Screen

17 Buttons on the Remote Control Used for

the Settings Menu

18 Settings Menu Functions

18 Picture

18 Sound

19 General

21 Support

21 Networks and the Internet

21 Configuring Your Network Connection

22 Upgrading Software

23 Update Now

23 Auto Update

6 English

MEDIA PLAY

NETWORK SERVICES

24 Playing Commercial Discs

24 Disc Storage & Management

24 Playing Photos, Videos, and Music

(Multimedia)

24 Playing Media Content Saved on a USB

Device

25 Playing Media Content Saved in a

Computer

25 Playing a Disc with User Recorded Content

26 Controlling Video Playback

26 Buttons on the Remote Control used for

Video Playback

27 Using the On-screen Menu during

Playback of a Video

29 Using the Sort By & Options Menus

29 Controlling Music Playback

29 Buttons on the Remote Control used for

Music Playback

30 Using the Options Menu During Playback

30 Using the Sort By & Options Menus on a

File Screen

30 Repeating Tracks on an Audio CD

30 Shuffling Tracks on an Audio CD

30 Creating a Playlist from an Audio CD

31 Playing Photo Contents

31 Using the On-screen Menu during

Playback of a Photo File

32 Using the Sort By & Options Menus

33 Creating a Samsung Account

34 Before Using Apps

34 Using Apps

34 The APPS Screen at a Glance

35 Starting an Application

36 Using the Internet

37 The Web Browser window at a Glance

39 Using the Browser Menu

40 Linking Your Internet Service Accounts to

the Product

40 BD-LIVE™

APPENDIX

41 Additional Information

41 Notes

43 Resolution according to the contents type

44 Digital Output Selection

45 Troubleshooting

48 Disc and Format Compatibility

48 Disc types and contents your product can

play

48 Disc types your product cannot play

49 Region Code

49 Logos of Discs the product can play

50 Supported Formats

54 Compliance and Compatibility Notice

55 Copy Protection

55 Network Service Disclaimer

56 Licenses

57 Specifications

Contents

7 English

Getting Started

Accessories

Check for the supplied accessories shown below.

Batteries (AA Size)

(4301-000101)

Power Cable

(3903-001117)

DISC

POP UP

123

/MENU

TOOLS

User Manual

(AK68-02656A)

Remote Control (AK59-00180A)

8 English

Front Panel

STOP BUTTON

OPEN/CLOSE BUTTON

POWER INDICATOR

Red: Power off

Green: Power on

Green blinking: Remote control or Front Key

PLAY/PAUSE BUTTON

POWER BUTTON

input, Software update.

POWER

REMOTE CONTROL

USB HOSTDISC TRAY

SENSOR

| NOTES |

\To upgrade the product's software through the USB HOST jack, you must use a USB memory stick.

\When the product displays an Ultra HD Blu-ray or standard Blu-ray Disc's menu, you cannot start the

movie by pressing the p button on the remote control or player. To play the movie, you must select Play Movie or Start in the disc's menu, and then press the (OK) button on the remote control.

Rear Panel

02 Getting Started

POWER

OPTICAL

DIGITAL

AUDIO OUT

MAIN

LAN

HDMI OUT

OPTICAL

DIGITAL

AUDIO OUT

LAN

MAIN

HDMI OUT

HDMI OUTLANPOWER DIGITAL AUDIO OUT

| NOTE |

\To use the Anynet+ (HDMI-CEC) function, connect an HDMI cable to the HDMI terminal.

9 English

Getting Started

Remote Control

| NOTE |

\Previous BD-Player remote controls may not be compatible with this player.

Tour of the Remote Control

Turns the TV o n and off.

Turns the playe r on and off.

Press to op en and close the disc tray.

TV volume adjustment.

After setup, allows you to set the input source o n your TV.

Use to display the number, color, or

information keypad on th e screen.

The color buttons are u sed both for menus

on the player and also seve ral Ultra HD

Blu-ray D isc or Blu-ray D isc functions.

(OK) : Use to select menu item s.

Move the cursor up, down, lef t, or right.

(Up/Down/Left/Right) :

Return to the previous me nu.

Display the home screen.

DISC

123

POP UP /MENU

TOOLS

Use to enter the disc menu.

Use to enter the Popup menu.

Press to use the Tools menu.

Press to play disc or files. or

Press to pause playing.

Press to se arch backwards or forwards.

Press to sk ip chapters.

Press to stop a disc or file.

Inserting Batteries (AA Battery x2)

Slide the battery cover in the direction of the arrow until it is completely removed. Insert 2 AA batteries (1.5V) in the correct +/- polarity configuration. Slide the battery cover back into

position.

10 English

Using Remote Control Buttons to Enter

POP UP /MENU

DISC

TOOLS

123

TV Codes

1. Press and hold the (TV Power) button.

2. While holding the

(TV Power) button,

press the buttons on the remote that correspond to a two-digit TV Code from the list below. Use the illustration to the right as a guide. For example: To enter 01, press the TOOLS button and then press the 123 button. Note that some TV brands have more than one 2-digit code. If the first code does not work, try the next.

TV Control Codes

Brand Codes

SAMSUNG 01, 02, 03, 04, 05, 06, 07, 08, 09

AIWA 82

ANAM 10, 11, 12, 13, 14, 15, 16, 17, 18

BANG & OLUFSEN

BLAUPUNKT 71

BRANDT 73

BRIONVEGA 57

CGE 52

CONTINENTAL

EDISON

DAEWOO

EMERSON 64

FERGUSON 73

FINLUX 06, 49, 57

FORMENTI 57

FUJITSU 84

GRADIENTE 70

GRUNDIG 49, 52, 71

HITACHI 60, 72, 73, 75

IMPERIAL 52

JVC 61, 79

19, 20, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34

06, 19, 20, 21, 22, 78

Brand Codes

LOEWE 06, 69

LOEWE OPTA

MAGNAVOX

METZ 57

MITSUBISHI

MIVAR 52, 77

NEC

NEWSAN 68

NOBLEX 66

NOKIA 74

NORDMENDE

PANASONIC 13, 53, 54, 74, 75

PHILIPS 06, 56, 57

PHONOLA 72, 73, 75

PIONEER 58, 59, 73, 74

RADIOLA 06, 56

RADIOMARELLI 57

RCA 45, 46

REX 74

SABA 57, 72, 73, 74, 75

SALORA 74

SANYO 41, 42, 43, 44, 48

SCHNEIDER 06

SELECO 74

SHARP 36, 37, 38, 39, 48

SIEMENS 71

SINGER 57

SINUDYNE 57

SONY 35, 48

TELEAVA 73

TELEFUNKEN

THOMSON 72, 73, 75

THOMSON ASIA 80, 81

TOSHIBA

WEGA 57

YOKO 06

ZENITH 63

06, 57

06, 48, 62, 65

72, 73, 75

67, 73, 75, 76

47, 48, 49, 50, 51, 52

02 Getting Started

11 English

Connections

LAN

OPTICAL

DIGITAL

AUDIO OUT

Connections

Connecting to a TV

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.

- Do not connect the power cord to the wall outlet until you have made all the other connections.

- When you change the connections, turn off all devices before you start.

MAIN

( )

OPTICAL

DIGITAL AUDIO OUT

LAN HDMI OUT

MAIN ( )

POWER

Audio Video

| NOTES |

\Optimum picture quality is automatically obtained (HDMI UHD Color - On) when the player is

connected to a Samsung UHD TV.

\To use the Anynet+ (HDMI-CEC) function, connect the HDMI cable to the HDMI terminal.

\If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the

DIGITAL AUDIO OUT on the product to an audio system to hear audio.

\An HDMI to HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.

\Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual

of your TV.

\When you connect the product to your TV using an HDMI cable or to a new TV, and then turn it on for

the first time, the product automatically sets the HDMI output resolution to the highest supported by the TV.

\A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu.

\To view video in the HDMI 720p, 1080p, or 2160p output mode, you must use a high speed (category

2) HDMI cable.

HDMI OUT

12 English

\HDMI outputs only a pure digital signal to the TV.

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.

\If your TV does not support HDCP (High-bandwidth Digital Content Protection) version 2.2, some Ultra

HD Blu-ray titles may play at the 1080p resolution.

- This action is regulated by the Ultra HD Blu-ray Disc content's copyright protection standard according to the producer's intention to avoid infringing the copyright.

- To view video from a Ultra HD Blu-ray Disc at its original resolution, connect the HDMI cable to an HDMI input port on the TV that supports HDCP 2.2.

- To check whether the TV supports HDCP 2.2, check the HDMI port on the back of the TV or refer to the TV user's manual.

\This product supports the HDR function. (HDR: High Dynamic Range is a technique used to reproduce

a greater dynamic range of luminosity than is possible with conventional imaging devices.)

- To take advantage of the HDR function, you need HDR content, a TV supporting HDR, and a highspeed HDMI cable.

- Connect the player to an HDMI input terminal on the TV that supports the HDR function using the high speed HDMI cable.

- Use the TV's menu to activate the HDR related function. For further information, refer to the TV's user manual.

03 Connections

13 English

Connections

Connecting to an Audio Device

You can connect this product to an audio system using the methods illustrated below.

- Do not connect the power cord to the wall outlet until you have made all the other connections.

- When you change the connections, turn off all devices before you start.

Method 1 Connecting to an HDMI (HDR) compatible Soundbar / AV receiver that supports pass through

• Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your receiver. Connect another HDMI cable from the HDMI OUT jack of your receiver

to the HDMI IN jack of your TV.

- Your receiver must have 4K pass through capability to pass through UHD video content.

MAIN

( )

HDMI OUT

Audio/Video

Soundbar / AV receiver

OPTICAL

DIGITAL AUDIO OUT

LAN HDMI OUT

MAIN ( )

POWER

Video

| NOTES |

\You must set up HDMI UHD Color to enable HDR on your Samsung TV manually if your player is not

directly connected to the TV. (For example, through a Soundbar or AV receiver.)

\If AACS 2.0 was applied to the contents that you want to play, the contents may not be displayed on the

screen depending on the AV receiver connected. For more detailed information, refer to the user manual of your AV receiver.

14 English

Method 2 Connecting to a Soundbar /

POWER

LAN HDMI OUT

MAIN ( )

OPTICAL

DIGITAL

AUDIO OUT

LAN

HDMI OUT

MAIN

( )

OPTICAL

DIGITAL

AUDIO OUT

AV receiver with a Digital Optical Cable

• Using a digital Optical cable (not supplied),

connect the DIGITAL AUDIO OUT jack on the product to the DIGITAL AUDIO IN jack of the receiver.

• You will hear sound only through the front two

speakers with Digital Output set to PCM.

Audio

Connecting to a Network

You can connect your product to your network. Only a wired connection is supported.

Wired Network

Router or wall connection

OPTICAL

DIGITAL AUDIO OUT

LAN HDMI OUT

LAN

MAIN ( )

POWER

| NOTES |

\Your router or your Internet Service Provider's

policies may prevent the product from accessing Samsung's software update server. If this occurs, contact your Internet Service Provider (ISP) for more information.

\DSL users, please use a router to make a

network connection.

\Use Cat 7 (*STP Type) cable for the connection.

(* Shielded Twisted Pair)

03 Connections

Soundbar / AV receiver

| NOTE |

\If you connect a receiver to the player's

DIGITAL AUDIO OUT port, the receiver’s audio reproduction may not synchronize with that of the TV.

15 English

Settings

The Initial Settings Procedure

• The Home screen will not appear if you do not configure the initial settings.

• The OSD (On Screen Display) may change in this product after you upgrade the software version.

• The access steps may differ depending on the menu you selected.

After you have connected the product to your TV, turn on the TV and product. When you turn on the product the first time, the product's Initial Settings screen appears on the TV. The Initial Settings procedure lets you set the On Screen Display (OSD) and menu languages, the aspect ratio (screen size), and network configuration, and connect the player to the Internet. Follow the directions on the screen.

| NOTES |

\If you skip Network Setup during the Initial

Settings procedure, you can configure your network settings later. See "Configuring Your Network Connection" on pages 21~22 for instructions.

\If you want to display the Initial Settings screen

again and make changes, select Settings > General > Start Setup in the Home screen or select Settings > Support > Reset. (See page

21)

\If you want to use the Anynet+ (HDMI-CEC)

function, please follow the instructions below.

1) Connect the product to an Anynet+ (HDMI- CEC)-compliant Samsung TV using an HDMI Cable.

2) Set the Anynet+ (HDMI-CEC) feature to On in both the TV and the product.

3) Set the player to the Initial Settings Procedure.

The Home Screen

Disc

1 2 3 4 5

(Functions)

• Settings : Opens the product’s

menu. In the menu, you can set various functions to suit your personal preferences. When you move focus to the Settings menu, the Quick Settings menu appears. Use the menu to customize various options, such as

Picture Mode, Fit Screen Size, Sound Output, Audio Output Format, and

Network.

• Source : Select an inserted disc or

USB storage device, or a connected network device.

• Search : Lets you search for content

in Apps and YouTube by entering corresponding search words.

• APPS : Access various for pay or

free-of-charge applications.

Disc : Displays the selected source.

Downloaded Apps : Displays downloaded apps. Apps displayed here can be deleted,

edited, or rearranged, if necessary.

You can access the Internet.

Use the Add to Home option to add frequently used menu items to the bottom

of the Home screen.

Internet InternetApp1 App2 App3

16 English

| NOTE |

POP UP /MENU

DISC

TOOLS

123

\If you leave the player in the stop mode for more

than 5 minutes without using it, a screen saver will appear on your TV. If the player is left in the screen saver mode for more than 15 minutes, the power will automatically turn off.

Accessing the Settings Screen

1. Select Settings on the Home screen, and

then press (OK) button. The Settings screen appears.

Buttons on the Remote Control Used for the Settings Menu

04 Settings

1 2

3 4

Picture

Sound

General

Support

Picture

TV Aspect Ratio 16:9 Original

Resolution Auto

Movie Frame (24p)

Fit Screen Size Size 4 (100%)

HDMI Color Format Auto

HDMI Deep Color Off

HDR to SDR Middle Gamma

2. To access the menus, sub-menus, and

options on the Settings screen, please refer to the remote control illustration in the next column.

(OK) button : Press to activate the

currently selected item or confirm a

setting.

(Up/Down/Left/Right) buttons : Press

to move the cursor or select an item.

(Return) button : Press to return to the

previous menu.

(Home) button : Press to move to the

Home screen.

Detailed Function Information

Each Settings function, menu item, and individual option is explained in detail on-screen. To view an explanation, use the Up/Down/Left/Right buttons to select the function, menu item, or option. The explanation will usually appear on the right side of the screen. A short description of each Settings function starts on the next page. Additional information on some of the functions is also in the Appendix of this manual.

17 English

Settings

Settings Menu Functions

Picture

TV Aspect Ratio

Lets you adjust the output of the product to the screen size and screen format of your TV.

Resolution

Set the output resolution of the HDMI video signal to Auto, 2160p, 1080p, 720p, or 480p.

The number indicates the number of lines of video per frame. Generally, the more lines, the higher the quality.

Movie Frame (24p)

If the product is connected to a 24p compatible TV, setting the Movie Frame (24p) feature to Auto lets the product adjust its HDMI output to 24 frames per second automatically for improved picture quality.

•

You can enjoy the Movie Frame (24p) feature only on a TV supporting this frame rate.

•

The Movie Frame (24p) feature becomes active only if the player is playing 24 frame rate contents.

•

Movie Frame is only available when the product is in the HDMI 1080p or 2160p output resolution modes.

Fit Screen Size

Set the screen to the optimal size.

HDMI Color Format

Lets you set the color space format for the HDMI output so that it matches the capabilities of the connected device (TV, monitor, etc). The screen goes black momentarily after you have selected a format.

HDMI Deep Color

Lets you set the product to output HDMI video with Deep Color. Deep Color provides more accurate color reproduction with greater color depth.

HDR to SDR

Lets you set the gamma level when watching video converted from HDR to SDR.

Sound

Sound Output

Lets you select which speakers are active. Select an audio device from the list.

Audio Output Format

Lets you select the digital audio output format (HDMI) that is suitable for your AV Receiver.

| NOTE |

\If the player is connected to an ATMOS

Soundbar with Auto on, the sound option automatically switches to Bitstream.

Audio Output Format (Optical)

Lets you select the digital audio output format (Optical) that is suitable for your AV Receiver.

PCM Downsampling

Lets you choose to have 96kHz PCM signals downsampled to 48kHz before they are outputted to an amplifier. Turn on PCM Downsampling if the amplifier or receiver is not compatible with 96kHZ signal.

18 English

+ 41 hidden pages