Samsung T24E310ND User manual

LED TV

POWER

SUM

user manual

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and speciﬁcations may be changed without notice.

Important Warranty Information Regarding Television Format Viewing

✎

See the warranty card for more information on warranty terms.

Wide screen format LED Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to ﬁll the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on non- expanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of LED Displays that leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats you use for viewing. Uneven LED aging as a result of format selection and use, as well as burned-in images, are not covered by your Samsung limited warranty.

•SAMSUNGELECTRONICSNORTHAMERICANLIMITED

WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally speciﬁed, and to the Original Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement,

the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center.

BN68-06997D-00

Transportation to and from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use of the product. Excluded, but not limited to, are any originally speciﬁed provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or replacements, accessories, options, upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please call toll-free:

–– In the United States : 1-800-SAMSUNG (1-800-726-7864) –– In Canada : 1-800-SAMSUNG

Still image warning

Avoid displaying still images (such as jpeg picture ﬁles) or still image elements (such as TV channel logos, TV shows or movies in panorama or 4:3 format, stock or news scroll bars, etc.) on the screen. The constant display of still pictures can cause ghosting or image burn-in (image retention) on the LED screen, which will affect image quality. To reduce the risk of this effect, please follow the recommendations below:

•Avoid displaying the same TV channel for long periods.

•Always try to display any image in full screen mode. Use the TV's

Picture Options menu to select the optimal screen size.

•Reduce brightness and contrast values to the minimum required to achieve the desired picture quality. Values that exceed the minimum may speed up the burn-in process.

•Frequently use all TV features designed to reduce image retention and screen burn-in. Refer to proper user manual section for details.

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Country CANADA U.S.A.

Samsung Electronics

Address

Customer Care Center

Web Site

Canada Inc. 2050 Derry Road West, Mississauga, Ontario L5N 0B9 Canada

1-800-SAMSUNG (726-7864)



www.samsung.com/ca/ support (English)

www.samsung.com/ca_fr/ support (French)

Samsung Electronics America, Inc. 85 Challenger Road Ridgeﬁeld Park, NJ 07660

www.samsung.com/us/ support

The On Screen Menus

Your TV has two kinds of menus, the Main menu and the various Tools menus. The Main menu gives you access to most or all of the menu options available on your TV. The Tools menus display a selected number of frequently used menu options that change depending on the screen you are viewing.

The Main menu has seven primary categories:

y Picture y Input

y Sound y Application y Channel y Support y Setup

To view the Main menu, press the MENU button on your remote. To view a Tools menu, press the TOOLS button on your remote.

✎ The menu options that appear in the Main menu depend

on the Source you have selected. For example, if you have selected the HDMI source, the Channel category will not appear. To see the Channel category, you must first select T V in the Source List.

The Menu options are presented below, arranged by Main menu categories. A Tools button symbol

name indicates the option is also available in one of the Tools menus.

(

) next to an option

Picture Menu

Mode

Select your preferred picture mode.

✎ When your TV is conne cted to a PC, you can only select

Entertain and Standard

■

Dynamic: Brightens the screen. Suitable for a bright room.

■

Standard: Suitable for a normal.

■

Movie: Darkens the screen, making it less glary. Suitable for watching movies in a darkened room.

■

Entertain: Sharpens the picture. Suitable for games.

✎ Only available when the TV is connected to a PC.

Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)

■

Backlight: Adjusts the brightness of the screen by adjusting the brightness of the individual pixels.

■

Contrast: Increases or decreases the contrast between dark and light areas of the picture.

■

Brightness: Adjusts the brightness of the screen. Not as effective as Backlight.

■

Sharpness: Sharpens or dulls the edges of objects.

■

Color: Adjusts the color saturation. The higher the Color setting, the more intense the color. Low settings remove color and the picture becomes black, white and gray.

■

Tint (G/R): Adjusts the amount of green and red in the picture. As you increase the amount of green, the amount of red decreases and vice versa.

✎ When the T V is connected to a PC, you can only make

changes to Backlight, Contrast, Brightness, and

Sharpness.

- 2 -- 1 -

Picture Options

When the T V is connected to a PC, you can only make

✎

changes to the Color Tone, Size and HDMI Black Level.

■

Color Tone (Cool / Standard / Warm): Cool makes the picture bluer (cooler). Warm make the picture redder (warmer).

■

Size: Set the size and aspect ratio of the picture on the screen. Your cable box or satellite receiver may have its own set of

screen sizes as well. However, we highly recommend you use the TVs 16:9 mode most of the time.

✎ The menu is deactivated, when the H. 264 (1080p) DTV is

being played.

16:9: Sets the picture to the 16:9 wide screen format. Zoom1: Provides moderate magniﬁcation of the picture. Sides,

top, and bottom are cut off. Zoom2: Provides larger magniﬁcation of the picture. Sides, top,

and bottom are cut off. Wide Fit: Enlarges the aspect ratio of the picture so the picture

ﬁts the entire screen. 4:3: Sets the picture to the old, 4:3 format and puts black or gray

borders on the right and left of the picture.

✎ Do not watch your TV in the 4:3 format for a long time.

Traces of borders displayed on the left, right and center of the screen may cause image retention (screen burn) which is not covered by the warranty.

Screen Fit: Displays the full image without any cut-off when your TV is inputting HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) HD signals.

Custom: Magniﬁes or shrinks 16:9 pictures vertically and/or horizontally. A magniﬁed or shrunk picture can be moved left, right, up, and down.

✎ HD (High Definition) has a 16:9 aspect ratio and 1080i/1080p

(1920x1080) or 720p (1280x720) resolution.

✎ You can adjust and store settings for each external device you

have connected to an input on the TV. Picture Sizes available by Input Source are listed below:

Input Source Picture Size

ATV, AV, Component (480i, 480p)

DTV (1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080p)

■

Digital Clean View (Off / Low / Medium / High / Auto) : If the broadcast signal received by your TV is weak, you can activate the Digital Clean View feature to reduce any static and ghosting that may appear on the screen.

16:9, Zoom1, Zoom2, 4:3

16:9, Wide Fit, 4:3, Screen Fit

✎ When the signal is weak, try all the Digital Clean View

options until the TV displays the best picture.

■

HDMI Black Level (Normal / Low) : For HDMI signals, select the black level to adjust the screen depth. Low make blacks look darker.

✎ Available only in HDMI mode (RGB signals).

■

Film Mode (Off / Auto) : Sets the TV to automatically sense and process ﬁlm signals from all sources and adjusts the picture for optimum quality.

✎ Available in ATV, DTV (interlace), AV, COMPONENT (480i /

1080i) and HDMI (480i / 1080i).

■

Motion Lighting (Off / On): Reduce power consumption by brightness control adapted motion.

✎ Available in Standard mode only.

Picture Reset

■

Picture Reset (Reset Picture Mode/Cancel): Resets the picture settings to their factory defaults.

Sound Menu

Mode

■

Standard: Selects the normal sound mode.

■

Music: Emphasizes music over voices.

■

Movie: Provides the best sound for movies.

■

Clear Voice: Emphasizes voices over other sounds.

Equalizer

Available in Standard sound mode only.

■

Balance L/R: Adjusts the balance between the right and left speaker.

■

100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment): Adjusts the loudness of speciﬁc bandwidth frequencies.

■

Reset: Resets the equalizer to its default settings.

DTS TruSurround

Available in Standard sound mode only.

DTS TruSurround is a patented DTS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.

Preferred Language

Digital channels only.

Digital-TV broadcasts can transmit many audio tracks simultaneously (for example, simultaneous translations of a program into foreign languages).

✎ You can only select a language from among the ones being

broadcast.

Multi-Track Sound (MTS)

Analog channels only.

■

Mono: Select for channels that are broadcasting in mono or if you are having difﬁculty receiving a stereo signal.

■

Stereo: Select for channels that are broadcasting in stereo.

■

SAP: Select to listen to the Separate Audio Program, which is usually a foreign-language translation.

✎ Depending on the program being broadcast, you can listen to

Mono, Stereo or SAP.

Auto Volume

Automatically adjusts the volume level when you change video sources or content so the level remains the same.

SPDIF Output

The SPDIF (Sony Philips Digital InterFace) outputs an uncompressed digital audio signal when you connect the digital audio jack on the back of the TV to a digital audio in jack on a receiver or home theater.

■

Audio Format (PCM/Dolby Digital): You can select the Digital Audio output (SPDIF) format. The available Digital Audio output format may differ depending on the input source.

✎ By connecting the TV to a receiver or home theater with

Dolby Digital and 5.1ch speakers and selecting Dolby Digital, you can maximize your interactive 3D sound

experience.

■

Audio Delay: Lets you correct timing mismatches between the audio track and the video when you are watching the TV and listening to digital audio output from the TV through an external device such as an AV receiver. When you select Audio Delay, a slider appears. Use the left and right arrow buttons to adjust the slider. Press ENTER

when done (0ms ~ 250ms).

Speaker Select

A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker.

✎ When Speaker Select is set to External Speaker, the

volume and MUTE buttons will not operate and the sound settings will be limited.

✎ When Speaker Select is set to External Speaker.

x TV Speaker: Off, External Speaker: On

✎ When Speaker Select is set to TV Speaker.

x TV Speaker: On, External Speaker: On

✎ If there is no video signal, both speakers will be mute.

TV Installation Type

Specify the TV's installation type. Choose between Wall Mount and Stand to optimise the TV's sound automatically.

Visual Impaired

Digital channels only.

Adds verbal description to the main audio to help the visually impaired.

Dolby Digital Comp

Set Dolby Digital compression mode.

Sound Reset

■

Reset All: Resets all sound settings to the factory defaults.

Channel Menu

❑ Memorizing Channels

When you ﬁrst set up your TV using Plug & Play, the TV memorized the channels that were available over the air or through your cable system and added them to the Channel List. The Antenna and Auto program functions described below let you re-run the channel memorization function without having to re-run the Plug & Play procedure.

Antenna (Air / Cable)

Before your television can memorize the available channels, you must select your TV's signal source, Air (using an antenna) or Cable. Select MENU >Channel > Antenna > Air or Cable. After you have selected the signal source, go on to the Auto Program function.

✎ Selecting the signal source using the Antenna function also

determines the signal source the TV is tuned to. For example, if you receive your TV signal over the air, and you select Cable, you will see only snow. You must select Air to see a picture.

Auto Program

The Auto Program function memorizes all channels that are available over the air or through your cable system and adds them to the Channel List. To start Auto Program, follow these steps:

1. Push MENU

on your remote. The Antenna Source screen appears.

2. On the Antenna Source screen, select the source of your TV signal.

- 3 -

→ Channel → Auto Program → ENTERE

Air If your TV is connected to an antenna choose Air, and then press

ENTER

. The TV will automatically start memorizing channels.

Cable

If your TV is connected to a cable outlet, choose Cable, and then press ENTER

. Go to Step 3.

Auto

If you choose Auto, and then press ENTERE, the TV will automatically select the correct Antenna source. Go to Step 3.

3. On the Cable Type screen, use the ◄/►/▲/▼

the type of digital and analog cable systems you have: STD, HRC, or IRC. Most systems are STD (Standard). When done, select Start, and then press ENTER channels.

. The TV will start memorizing

buttons to select

✎ Channel memorization can take up to 45 minutes, depe nding

on your cable system.

✎ Memorized channels are added to the Added Channels

list. These are the channels you will se e when you use the Channel buttons on your remote.

Clear Scrambled Channel

This function ﬁlters out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes.

✎ Press the ENTER

Channel.

button to stop the Clear Scrambled

✎ This function is only available in Cable mode.

❑ Managing Channels

Channel List

See your list of Added channels, Favorite channels, or channels you've scheduled for viewing. Add or delete Favorite channels, add or delete channels from the Added Channels list, schedule channels or programs for viewing. Watch a channel by selecting the channel in the All Channels, Added Channels, or Favorite screen, pressing the ▲ / ▼ buttons, and then pressing the ENTER

6 Air

Added Channels

6-1 ♥ TV #6

7-1 ♥ TV #7

8 Air 9 Air

9-1 ♥ TV #9

10 Air

10-1 ♥ TV #10

Air ' Zoom ' Select T Tools

Channel List Screens icons are listed on the left side. Select an icon using the ▲/▼ buttons to view each list.

11-1 ♥ TV #11

■

All Channels: Shows all currently available channels including

those you deleted from the Added Channels list.

■

Added Channels: Shows all Added Channels. These are the

channels that appear when you press the CH LIST button.

■ *

Favorite: Shows all favorite channels.

button.

■

Programmed: Shows all channels and programs currently

scheduled using Timer Viewing.

✎ Remote control buttons active on the Channel List screen.

x Green (Zoom): Enlarges or shrinks a channel number. x Yel lo w (Select): Move the cu rsor to a chann el. Press the Yellow

button to select the channel. A additional channels. Then, open the Tools menu and a pply a function to the channels you selected.

(To ols): Displays the Channel List Tools menu. (The To ols

menus may differ depending on the situation.)

Display Icons Used in the Channel List Screens

Icons Meaning

A selected channel.

A Favorite channel.

A reserved program.

)

A program currently being broadcast.

(

❑ The Channel List Tools Menu

The Channel List Tools menu contains most of the functions you can use on the screens. To view, select a list screen, select a channel, and then press the

Add / Delete: Delete a channel from or add a channel to the

■

Added Channels list.

To delete channels from the Added Channels list, follow these steps:

1. Select one or more channels in the Added Channels list using

the ▲/▼ buttons and the Yellow Select button on your remote.

2. Press the TOOLS button on your remote. The Tools menu appears.

3. Select Delete in the Tools menu, and then press the ENTER button.

To add channels to the Added Channels list, follow these steps:

1. Select one or more channels in the All Channels list using the ▲/▼ buttons and the Yellow Select button on your remote.

2. Press the TOOLS button on your remote. The Tools menu appears.

3. Select Add in the Tools menu, and then press the ENTER button.

All Channel, Added Channels

TOOLS

button.

mark ap pears. Repeat to select

, and

Favorite List

✎ All deleted channels will be shown on the All Channels list.

You add channels back to the Added Channels list on the All Channels list.

✎ A gray-colored channel indicates the channel has been

deleted f rom the Added Channels list.

✎ The Add menu option only appears for deleted channels.

■

Add to Favorite/Delete from Favorite: Lets you add channels to and delete channels from your Favorites list.

To add channels to the Favorites list, follow these steps:

1. Select one or more channels in the All Channels list using the ▲/▼ buttons and the Yellow Select button on your remote.

2. Press the TOOLS button on your remote. The Tools menu appears.

3. Select Add to Favorite in the Tools menu, and then press the

- 4 -

ENTER

button.

To delete channels from the Favorites list, follow these steps:

1. Select one or more channels in the Favorite Channels list

using the ▲/▼ buttons and the Yellow Select button on your remote.

2. Press the TOOLS button on your remote. The Tools menu

appears.

3. Select Delete from Favorite in the Tools menu, and then press the ENTER

■

Timer Viewing: You can schedule a channel to be displayed automatically at a set time, even when you are watching another channel. You must set the current time ﬁrst in the Time > Clock function to use Time Viewing.

To schedule a channel, follow these steps:

1. Select a channel in the Added Channels list using the ▲/▼ buttons and the Yellow Select button on your remote.

2. Press the TOOLS button on your remote. The Tools menu appears.

3. Select Time Viewing in the Tools menu, and then press the

ENTER

Antenna Channel Repeat

DTV Air 6-1 Once

01-01-2015 12 : 01 am

Move U Adjust E Enter R Return

4. Use the ◄/► buttons to move from entry ﬁeld to entry ﬁeld and the ▲/▼ are displayed, you can also enter numbers directly using the number keypad on your remote.

button.

button. The Time Viewing screen appears.

Timer Viewing

▲

▼

Date Start Time

buttons to change the entries. Where numbers

✎ If you sele ct Everyday or Every Week, the date you

select in the Date field becomes the start date for your scheduled viewing. For Everyday, the TV will turn on every day, at the time you selected, starting from that date. For Ever yweek, the T V will turn on eve ry week, on the same day of the week as the start date you selected, at the time you selected, from that day on. If you select Once, the TV will turn on once, on the date and time you selected.

5. Press the ENTER

button on your remote when done.

✎ Only Added Channels can be scheduled. ✎ Scheduled programs and channels are displayed in the

Programmed List.

✎ When you select a digital channel, press the ► but ton to

view the digital program list. If you highlight a program in the list, and then press the ENTER you set Timer Viewing for that program directly.

■

Channel Name Edit: Analog channels only. Lets you assign a name of up to ﬁve characters to an analog channel. For example, Hist, Food, Golf, etc. This makes it easier to ﬁnd and select a channel.

■

Select All: Select all the channels in the displayed channel list.

■

Deselect All: Deselect all the selected displayed channels.

(Schedule) button,

✎ You can only select Deselect All when one or more

channels are selected.

■

Auto Program: See Auto Program under Memorizing Channels.

Programmed List (on the Channel List Screen)

The Programmed list displays the channels and programs you have scheduled for viewing using the Time Viewing function. You can view, modify, or delete a show you have scheduled using the functions on the Programmed List screen Tools menu.

Programmed List Screen Tools Menu

■

Change Info: Change the scheduling information for a show or channel you have scheduled.

To change the information, follow these steps:

1. Select the Programmed List icon on the left side of the Channel List screen, and then press the ENTER

2. On the Programmed List screen, select the show or channel entry you want to change, and then press the TOOLS button. The Tools menu appears.

3. Select Change Info, and then press the ENTER The Time Viewing screen appears.

4. Use the ◄/► buttons to move from entry ﬁeld to entry ﬁeld and the ▲/▼ are displayed, you can also enter numbers directly using the number keypad on your remote.

5. Press the ENTER

■

Cancel Schedules: Cancel a show or channel you have scheduled.

To cancel a scheduled show or channel, follow these steps:

1. Select the Programmed List icon on the left side of the Channel List screen, and then press the ENTER

2. On the Programmed List screen, select the show or channel entry you want to cancel, and then press the TOOLS button. The Tools menu appears.

3. Select Cancel Schedules, and then press the ENTER button. The Cancel Schedule screen appears.

4. Select OK, and then press the ENTER

■

Information: Display the information for a show or channel you have scheduled. You can also change the schedule Information.

1. Select the Programmed List icon on the left side of the Channel List screen, and then press the ENTER

2. On the Programmed List screen, select the show or channel entry you want information for, and then press the TOOLS button. The Tools menu appears.

3. Select Information, and then press the ENTER The Time Viewing Information screen appears.

4. Select Change Info and press the ENTER change information, or select Close and press the ENTER button to close the Information screen.

■

Select All / Deselect All: You can select or deselect all channels in the channel list.

buttons to change the entries. Where numbers

button when done.

button.

button to

❑ Other Channel Menu Functions

Channel Mode (Added Channels/Favorite Channels)

Lets you select the channel list displayed when you press the <CH> (Channel) button on your remote. For example, if you select Favorite Channels, you will only see Favorite channels when you press the <CH> button.

Fine Tune

Analog channels only.

If the reception is clear, you do not have to ﬁne tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, ﬁne tune the channel manually.

✎ Select the channel, and then select Fine Tune. ✎ Fine tuned channels that have been saved are marked with

an asterisk “*” on the right-hand side of the channel number in the channel banner.

✎To reset fine-tuning, select the channel, select Fine Tune, and

then select Reset on the Fine Tune screen.

Setup Menu

Plug & Play

Lets you re-run the Plug & Play initial setup procedure. For instructions, see your Quick Start Guide.

Language

Set the menu language.

✎ Choose between English, Español, and Français.

❑ Setting the Time

Time

The time you set will appe ar when you press the INFO

✎

button.

■

Clock: Set the clock so you can use the various timer features of the TV.

✎ If you disconnect the power cord, you have to set the

clock again.

To set the clock, follow these steps:

1. Select Setup >Time > Clock.

2. Press ENTER

ENTER

If you selected Auto:

The TV will automatically download the correct time from a digital channel.

• Select Time Zone, and then press the ENTER Use the▲/▼ buttons to select your Time Zone, and then press ENTER

• Select DST (Daylight Savings Time), and then press

ENTER

adjustment on and off manually. Select Off to turn off the DST adjustment. Select Auto if you want the TV to adjust to DST automatically. Press ENTER

and select Auto or Manual, and then press

again.

button.

. Select On if you want to turn the DST

when done.

✎ DST and Time Zone function are only available when

the Clock Mode is set to Auto.

If you selected Manual:

The Clock Set screen appears. Use the ▲/▼ buttons to change the values in each ﬁeld or use the number buttons to enter the values directly. Use the ◄/► buttons to move from ﬁeld to ﬁeld. When done with all the ﬁelds, press ENTER

✎ Available only when Clock Mode is set to Manual.

■

Sleep Timer

Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).

✎ To cancel the Sleep Timer, select Off.

Timer 1 / Timer 2 / Timer 3

Turns the TV on and off automatically at times and days you select. You can set three different on/off timer settings.

✎ You must set the clock first.

■

On Time / Off Time: Set the hour, minute, am/pm, and Activate/Inactivate ﬁelds for the On Time and Off Time. Use the ◄/► buttons to move from ﬁeld to ﬁeld. Use the ▲/▼ buttons to change the values in each ﬁeld. To activate the timer with the setting you have chosen, set the Activate/Inactivate ﬁeld to Activate.

■

Volume: Set the desired loudness.

■

Contents: To select what will be turned on when the timer setting is activated. You can set the TV to turn on a speciﬁc channel or play back contents such as photo or audio ﬁles.

Use the ◄/► buttons to move to move to the Contents ﬁeld, and then press the ENTER appears. Use the ◄/► buttons to move from ﬁeld to ﬁeld. Use the ▲/▼ buttons to change the values in each ﬁeld.

- TV/USB: Select TV or USB. The USB device must be

connected to your TV before you can select USB.

- Antenna: Displays the current antenna source, Air or Cable.

- Channel: If you have selected TV, select the desired channel.

- Music/Photo: If you have selected USB, follow these steps to

select a folder containing MP3 (Music) or JPEG (Photo) ﬁles on the USB device:

button. The Contents screen

✎ The maximum displayed number of files, including sub

folders, in one folder of USB storage device is 2000.

✎ The media may not be playing smoothly when using the

device lower than USB 2.0.

1. Use the ◄/► buttons to move to the ﬁeld under Music or the ﬁeld under Photo, and then press the ENTER button. The TV displays a single folder (the Root folder) and the type or name of the device.

2. Press the ENTER appears.

button. A list of folders on the device

✎ If there are no folders on your device, press the

Yel low select button to select the Root folder, and then press the RETURN button. The Timer screen re-appears.

3. Use the ▲/▼ buttons to highlight a folder that contains music or photos, and then press the Yellow select button to select the folder.

4. Press the RETURN button. The Timer screen re-appears.

■

Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select Manual, you can select the

days you want to activate the timer by using the ◄/► buttons to highlight the day, and then pressing the ENTER To unselect a day, highlight it, and then press the ENTER button.

When you ﬁnished making all your selections on the Timer screen, press either the ENTER

or RETURN button.

button.

❑ Other Features

Program Rating Lock

The Program Rating Lock feature lets you block programs you've determined are inappropriate for your children based on the program's ratings. To access the Program Rating Lock feature and make any changes, you must enter a PIN (personal identiﬁcation number). To watch a blocked program, you must also enter the same PIN.

✎ Program Rating Lock is not available in HDMI or

Component mode.

✎ The default PIN number of a new TV set is “0-0-0-0”. You can

set your own PIN using the Change PIN function.

How It Works

When you access the Program Rating Lock Menu functions for the ﬁrst time, the PIN input screen appears. Enter 0-0-0-0. The PIN screen closes and the Program Rating Lock Menu appears. Every time you access the Program Rating Lock functions, the PIN screen will appear and you must enter a PIN.

When the Rating Lock screen appears, select Program Rating Lock, and then press ENTER

ENTER

movies you want to block, select one of the options on the screen, and then press the ENTER

key again. Depending on what type of programs or

■

TV Parental Guidelines: You can block TV programs based on their ratings. This function allows you to control what your children are watching.

■

MPAA Rating: You can block movies based on their MPAA ratings. The Motion Picture Association of America (MPAA) has implemented a rating system that provides parents or guardians with advanced information on which ﬁlms are appropriate for children.

■

Canadian English: You can block TV programs based on their Anglophone Canadian ratings.

■

Canadian French: You can block TV programs based on their French Canadian ratings.

■

Downloadable U.S. Rating: Parental restriction information can be used while watching DTV channels.

. Select On, and then press the

button. The options are listed below:

Locking/Blocking Programs or Movies

You lock or block programs and/or movies in essentially the same way for each option. Each option displays a grid or table. All the tables have ratings listed on the left. The TV Parental Guidelines option also has kinds of content listed across the top: ALL: Lock all TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation / L: Adult Language / D: Sexually Suggestive Dialog.

To lock/block movies or shows with certain ratings and/or kinds of content, click the square next to the rating and/or under the kind of content. A lock appears. To unlock/unblock, click the square again. When you click a low rating, all the ratings above it will also display locks. You can also Allow All or Lock All. When done, press the

RETURN button on your remote.

■

Change PIN: The Change PIN screen will appear. Choose any 4 digits for your PIN and enter them in Enter New PIN ﬁelds. Re-enter the same 4 digits in Conﬁrm New PIN ﬁelds. When the Change PIN screen disappears, press the OK button. The TV has memorized your new PIN.

✎ If you forget the PIN, press the remote-control buttons in

the following sequence, which resets the pin to “0-0-0-0” :

POWER (off) → MUTE → 8 → 2 → 4 → POWER (on)

Game Mode (On/Off)

When you connect a game console such as a PlayStation™ or Xbox™ to your TV, you can enjoy a more realistic gaming experience by turning on the Game Mode function.

✎ Precautions and limitations for game mode:

x Before you disconnect the game console and connect another

extern al device, set Game Mode to Off in the setup me nu.

x If you display the TV menu in Game Mode, the scre en shakes

slightly.

✎ Game Mode is not available when the input source is set to

TV.

✎ After connecting the game console, set Game Mode to On.

You may notice slightly reduced picture quality.

Caption

(On-Screen Text Dialogue)

■

Caption: You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen.

✎ The Caption feature does not work in Component or

HDMI mode.

■

Caption Mode: You can select the desired caption mode.

Default / CC1~CC4 / Text1~Text4: (analog channels only) The

Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to the TV. (Depending on the broadcasting signal, the Analog Caption function may or may not work with digital channels.)

Default / Service1~Service6 / CC1~CC4 / Text1~Text4: (Digital channels only) The Digital Captions function works with digital channels.

✎ Se rv ice1~6 may not be available in digital caption mode

depending on the broadcast.

■

Digital Caption Options: (Digital channels only) Size: Options include Default, Small, Standard and Large. The

default is Standard. Font Style: Options include Default and Styles 0 to 7. The

default is Style 0. Foreground Color: Options include Default, White, Black, Red,

Green, Blue, Yellow, Magenta and Cyan. You can change the color of the letters. The default is White.

Background Color: Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can change the background color of the captions. The default is Black.

Foreground Opacity: This adjusts the opacity of text. Options include Default, Transparent, Translucent, Solid and Flashing.

Background Opacity: This adjusts the opacity of the caption background. Options include Default, Transparent, Translucent, Solid and Flashing.

Return to Default: This option sets each Size, Font Style, Foreground Color, Background Color, Foreground Opacity

and Background Opacity to its default.

✎ Digital Caption Options are available only when you can

select Default and Service1 ~ Service 6 in Caption Mode.

✎ The Foreground and Background cannot be set to the

same color.

Boot Logo

Enable/disable displaying the logo while the TV starts up.

Eco Solution

■

Energy Saving (Off / Low / Medium / High / Picture Off) : This adjust the brightness of the TV in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button except volume button to turn on the screen.

■

No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Sets how quickly the TV switches to standby mode, if no picture is being received.

✎ Disabled when the PC is in power saving mode.

■

Auto Power Off (Off / On): The TV will be automatically turned off when no user operation is received for 4 hours.

Auto Protection Time

■

Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10 hours): If the screen remains idle with a still image for a certain

period of time you deﬁne, the screen saver is activated to prevent the formation of ghost images on the screen.

Support Menu

Self Diagnosis

■

Picture Test: Use to check for picture problems. If the problem appears in the test picture, select Yes and follow the directions on the screen.

■

Sound Test: Use the built-in melody sound to check for sound problems. If the problem occurs during the test, select Yes and follow the directions on the screen.

■

Signal Strength: (Digital channels only) An HD channel’s reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength.

■

Reset: Reset all settings to the factory defaults.

✎ The PIN input screen appears before the setup screen. ✎ Enter your 4-digit PIN. Change the PIN using the Change

PIN option.

Software Upgrade

Software Upgrade can be performed by downloading the latest ﬁrmware from samsung.com to a USB memory device.

HD Connection Guide

Refer to this information when connecting external devices to the T V.

Contact Samsung

View this information when your TV does not work properly or when you want to upgrade the software. You can ﬁnd information regarding our call centers and how to download products and software.

Media Play

Enjoy photos, music or movie ﬁles saved on a USB Mass Storage Class (MSC) device.

❑ Connecting a USB Device

1. Turn on your TV.

2. Connect a USB device containing photo, music, or movie ﬁles to

the USB jack on the back of the TV. A pop up window appears.

3. Press the MEDIA.P button on your remote. The Media Play

menu appears.

❑ Using the Media Play Menu

Media Play

Videos

■

Change Device

To open Media Play in the Menu, follow these steps:

1. Press the MENU button. Then, press the ▲ or ▼ button to

select Application on the left, and then press the ENTER button.

2. Press the ▲ or ▼ button to select Media Play (USB), and then press the ENTER

3. Press the ◄ or ► button to select an icon (Videos, Music, Photos, Settings), and then press the ENTER

✎ Media Play might not work properly with unlicensed

multimedia files.

✎ Need-to-Know List before using Media Play (USB)

x The fil e system suppo rts FAT16, FAT32 and NTFS. x Cert ain types of U SB Digital camera and audio devices m ay not

be compatible with thi s TV.

x Media Play only supports USB Mas s Storage Clas s (MSC)

devices. MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash Card Readers. Devices s hould be connected directly to the TV’s USB port. USB HDD is not supported.

x Before connecting your device to the T V, please back up your

files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss.

x A USB device that requires high power (more than 0.5A) may not

be supported.

x Do not disconnect the USB device while it is loading. x The higher the resolution of the image, the longer it takes to

display on the screen.

x The maximum supported JPEG resolution is 15360 x 8640 pixels. x If a ﬁle is corrupted or the TV does not support the ﬁle type, the

“Not Supported File Format” message appears.

x The TV cannot play MP3 files with DRM that have been

downloaded from a for-pay site. Digital Rights Management (DRM) is a technology that supports the creation, distribution, and management of digital content in an integrated and compre hensive way, incl uding protecting the rights a nd interests of content providers, preventing illegal copying of contents, and managing billing and settlements.

button.

Enter R Return

MEDIA.P

button.

- 6 -- 5 -

[T24E310-ZA]BN68-06997D-00ENG.indb 1 2015-04-09 오전 9:05:37

- 7 -

- 8 -

►

1/1

Movie 01.avi

3/15

I Love you

Jhon

Music 1

No Singer

Music 2

No Singer

Music 3

No Singer

Music 4

No Singer

Music 5

No Singer

I Love You

Jhon

1st Album Pop 2010

4.2MB

01:10 / 04:02

SUM

Image1024.jpg 1024x768 2010/2/1 3/15

x If an over-power warning message is displayed while you are

connecting or using a USB device, the device may not be recognized or may malfunction.

x If the TV has no input du ring the time period set in Au to

Protection Time, the Screensaver will run.

x If you use a USB extension cable, the TV may not recognize the

USB device or may not be able to read the ﬁles on the device.

x If a USB device connected to the TV is not recognized, the list of

ﬁles on the device is corrupted, or a ﬁle in the list is not played, connect the USB device to a PC, format the device, and check the connection.

x If a ﬁle you deleted from the PC is still found when you run Media

Play, use the “Empty the Recycle Bin” function on the PC to permanently delete the ﬁle.

x Photos only supports the sequential jpeg format. x The Videos option does not support the scene search and

thumbnail functions.

x If the number of ﬁles and folders saved on a USB storage device is

over approximately 4000, the ﬁles and folders may not appear and some folders may not open.

x The maximum displayed number of ﬁles, including sub folders, in

one folder of USB storage device is 2000.

x The media may not be playing smoothly when using the device

lower than USB 2.0.

Videos

Pause L Jump T Tools R Return

1. In the Media Play menu, press the ◄ or ► button to select

Videos, and then press the ENTER

2. Press the

3. Press the ENTER

◄/►/▲/▼ buttons to select a video in the ﬁle list.

button or  (Play) button.

button.

- The file name is displayed on the top of the screen with the

playing time.

- If video time information is unknown, playing time and the

progress bar are not displayed.

- During video playback, you can search using the

►

buttons.

◄

and

✎ In this mode, you can play movie clips contained in a game,

but you cannot play the game itself.

y Supported Subtitle Formats

- External

Name File extension

MPEG-4 timed text .ttxt

SAMI .smi

SubRip .srt

SubViewer .sub

Micro DVD .sub or .txt

SubStation Alpha .ssa

Advanced SubStation Alpha .ass

- Internal

Name Container Format

Xsub AVI Picture Format

SubStation Alpha MKV Text Format

Advanced SubStation Alpha MKV Text Format

SubRip MKV Text Format

MPEG-4 Timed text MP4 Text Format

y Supported Video Formats

File

Container Video Codec Resolution

Extension

*.mp4 MP4

"*.avi

"AVI

*.mkv"

MKV"

"*.asf

ASF

*.wmv"

"*.ts *.trp

*.tp

"*.dat

*.mpg

*.mpeg *.vob"

*.3gp 3GPP

ﬂash

*.ﬂv

formats

Divx3.11/4.12/

MPEG 1/2/4 1920x1080 6~30 20Mbps

Divx 3.11/4.12/

MPEG 1/2/4 1920x1080 6~30 20Mbps

MPEG2 -TS 1920x1080 6~30 20Mbps

MPEG 1/2/4 1920x1080 6~30 20Mbps

Sorenson H.263 1920x1080 6~30 20Mbps

1920x1080 6~30 20Mbps

5.x/6.0

H264 1920x1080 6~30 20Mbps

VC-1 1920x1080 6~30 20Mbps

MJPEG 640x480 6~30 10Mbps

1920x1080 6~30 20Mbps

5.x/6.0

H264 1920x1080 6~30 20Mbps

MJPEG 640x480 6~30 10Mbps

1920x1080 6~30 20Mbps

5.x/6.0

H.264 1920x1080 6~30 20Mbps

MPEG1 1920x1080 6~30 20Mbps

MPEG2 1920x1080 6~30 20Mbps

H. 264 1920x1080 6~30 20Mbps

H.264 1920x1080 6~30 20Mbps

Frame

rate(fps)

Bit

rate(Mbps)

Audio

Codec

MP3 /

ADPCM /

AAC

MP3 / AC3

/ LPCM / ADPCM /

DTS

MP3 / AC3

/ LPCM /

ADPCM / WMA /

WMA Pro

AC3 / AAC

/ MP3 /

DD+H. 264 1920x1080 6~30 20Mbps

AC3 / MPEG / LPCM /

AAC

MP3

Other Restrictions

y Video content will not play, or not play correctly, if there is an error

in the content or the container.

y Sound or video may not work if the contents have a standard

bit rate/ frame rate above the compatible Frame/sec listed in the Supported Video Formats table.

y If the Index Table erroneous, the Seek (Jump) function is not

supported.

y The menu may take longer to appear if the video’s bit rate

exceeds 10Mbps.

y Video content can not be played if there are many contents in

one ﬁle.

Video Decoder

Supports up to H.264, Level 4.1

H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.

MPEG4 SP, ASP :

– Below 1280 x 720: 60 frame max

– Above 1280 x 720: 30 frame max

H.263 is not supported.

GMC is not support.

Audio Decoder

Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO

WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR mode of WMA Pro is not supported)

WMA Lossless is not supported.

Music

Playlist

Pause L Jump T Tools R Return

1. In the Media Play menu, press the ◄ or ► button to select

Music, and then press the ENTER

button.

2. Press the ◄/►/▲/▼ buttons to select the desired Music in the

ﬁle list.

3. Press the ENTER

button or  (Play) button.

✎ During music playback, you can search using the ◄ and

► button.

✎



(REW ) and μ (FF) buttons do not function during

play.

✎ Media Play only displays files with MP3 and PCM file

extension. Other file extensions are not displayed, even if they are saved on the same USB dev ice.

✎ If the sound is abnormal when playing MP3 files, adjust the

Equalizer in the Sound menu. (An over-modulated MP3 file may cause a sound problem.)

y Supported Music ﬁle Formats

File Extension Type Codec

*.mp3 MPEG MPEG1 Audio Layer 3

*.wav wav wav

Photos

Normal

Pause L Previous/Next T Tools R Return

1. In the Media Play menu, press the ◄ or ► button to select

Photos, then press the ENTER

button.

2. Press the ◄/►/▲/▼ buttons to select a photo in the ﬁle list.

3. Press the ENTER

button or  (Play) button.

✎ NOTE

x While a photo list is displayed, press the

button o n the remote control to start a slide show.



(Play) / ENTERE

x All fil es in the file list section will be displayed in the slide s how. x During the slide show, files are displayed in order. x During the slide show, you c an adjust the slide show spe ed

using (π) (REW ) or (µ) (FF) button.

x You can move to other files using ◄ or ► button.

✎ Media Play can play Music files automatically during a Slide

Show if Background Music is set to On.

✎ You cannot change the Mode in Background Music until the

Background Music file has finished loading.

y Supported Photo Formats

Image Photo Resolution

JPEG

Base-line 15360 x 8704

Progressive 1024 x 768

Other Restrictions

y CMYK, YCCK Color space JPEG are not supported.

Playing Multiple Files

■

Playing selected video/music/photo ﬁles

1. On the File List screen, highlight a ﬁle, and then press the Yellow

button on your remote.

2. Repeat Step 1 to select multiple ﬁles.

✎ NOTE

x A

mark ap pears to the left of the selected files.

x To cancel a selection, press the Yellow button a gain. x To deselect all selected files, pres s the TOOLS button, select

Desel ect All, and then the ENTER

3. Press the TOOLS button, select Play Selected Contents, and

then press the ENTER

■

Playing a video/music/photo folder

button.

1. With the folders on your USB device displayed, use the

◄/►/▲/▼ buttons to highlight a folder.

2. Press the TOOLS button, select Play Folder, and then press the

ENTER

button.

Media Play - Additional Functions

■

Videos/Music/Photos Play Option menus

When playing a ﬁle, press the TOOLS button.

Category Operation Videos Music Photos

Title

Repeat Mode

Picture Size

Picture Mode You can adjust the picture setting.

Sound Mode You can adjust the sound setting.

Subtitle Setting

Audio Format

Audio Language

Stop Slide Show /

Start Slide Show

Slide Show Speed

Background Music

Zoom

Rotate

Information

You can select another video ﬁle to play directly.

You can play movie and music ﬁles repeatedly.

You can adjust the picture size to your preference.

You can play the video with Subtitles. This function only works if the subtitles have the same ﬁle name as the video.

You can select the digital audio output format.

You can change the audio language if the video has more than one language.

You can start or stop a Slide Show.

You can select the slide show speed during the slide show.

You can set and select background music when watching a Slide Show.

You can zoom into images in full screen mode.

You can rotate images in full screen mode.

You can see detailed information about the played ﬁle.

c c

c c c

Other Information

Installing the Wall Mount Kit

The wall mount kit (sold separately) allows you to mount the TV on the wall.

For detailed information about installing the wall mount, see the instructions provided with the wall mount items. Contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own.

Wall Mount Kit Speciﬁcations (VESA)

✎ The wall mount kit is not supplied, but sold separately.

Install your wall mount on a solid wall perpendicular to the ﬂoor. When attaching to other building materials, please contact your nearest dealer. If you install the TV on a ceiling or slanted wall, it

may fall and result in severe personal injury.

✎ NOTE

x Standard dimensions for wall mou nt kits are show n in the table

below.

x When purchasing our wall mount kit, a detailed installation

manual and all parts necessary for assembly are provi ded.

x Do not use screws that do not comply with the VESA standard

screw specifications.

x Do not use screws that are lo nger than the s tandard dim ension

or do not comply with the VESA standard screw specif ications. Screws th at are too long may c ause damage to the inside of the TV set.

x For wall mounts that do not comply with the VESA standard

screw specifications, the leng th of the screws may differ depending on the wall mount specifications.

x Do not fasten the screws too f irmly. This may damage the

product or cause the product to fall, le ading to personal injur y. Samsung is not liable for these kinds of accidents.

x Samsung is not liable for product damage or personal injur y

when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.

x Do not mount the TV at more than a 15 degree tilt. x Always have two people m ount the TV on a wall.

Product

Family

LED-TV LT24E310ND 75 X 75 M4 4

Models

VESA screw hole specs

(A * B) in millimeters

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.

Standard

Screw

Quantity

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the antifall device for safety purposes, as follows.

To prevent the TV from falling

✎ Since the necessary brackets, screws, and string or cable are

not supplied, please purchase these separately.

1. Insert the screws into the wall brackets and ﬁrmly fasten them to

the wall. Make sure the screws are ﬁrmly ﬁxed to the wall.

✎ We strongly recommend you drive the screws into a stud.

2. Using screws, insert the screws through the TV brackets, and

then fasten the screws to the top VESA screw holes on the back of the TV.

3. Connect the brackets on the TV and the brackets on the wall

with a strong string or cable, and then tie the string or cable tightly to the brackets.

✎ Verify all connections are properly secured. Periodically check

the connections for any sign of fatigue or failure. If you have any doubt about the security of your connections, contact a professional installer.

✎ Install the TV close to the wall so that it does not fall. ✎ Connect the string or cable so that the brackets on the wall

are at the same height or lower than the brackets on the TV. Untie the string or cable before moving the TV.

✎ To purchase a T V Holder kit, contact Samsung customer

care.

Kensington Lock

The Kensington Lock is not supplied by Samsung. It is a device used to physically ﬁx the system when using it in a public place. Refer to the manual provided with the Kensington Lock for additional information on proper use.

✎ Please f ind a “

slot is beside the “

” icon on the rear of the TV. The Kensington

” icon.

✎ The position and color may differ depending on the model.

To lock the product, follow these steps:

1. Wrap the Kensington lock cable around a large, stationary object

such as desk or chair.

2. Slide the end of the cable with the lock attached through the

looped end of the Kensington lock cable.

Display Modes (HDMI/DVI Input)

Optimal resolution: 1366 x 768 pixels

Mode Resolution

IBM 720 x 400 31.469 70.087 28.322 -/+

640 x 480 35.000 66.667 30.240 -/-

MAC

832 x 624 49.726 74.551 57.284 -/-

640 x 480 31.469 59.940 25.175 -/-

640 x 480 37.861 72.809 31.500 -/-

640 x 480 37.500 75.000 31.500 -/-

800 x 600 37.879 60.317 40.000 +/+

800 x 600 48.077 72.188 50.000 +/+

VESA DMT

800 x 600 46.875 75.000 49.500 +/+

1024 x 768 48.363 60.004 65.000 -/-

1024 x 768 56.476 70.069 75.000 -/-

1024 x 768 60.023 75.029 78.750 +/+

1280 x 720 45.000 60.000 74.250 +/+

1366 x 768 47.712 59.790 85.500 +/+

Horizontal

Frequency (KHz)

Vertical

Frequency (Hz)

Pixel Clock

Frequency (MHz)

Sync Polarity

(H / V)

3. Insert the locking device into the Kensington slot on the product 1.

4. Lock the lock.

✎ These are general instructions. For exact instructions, see the

User manual supplied with the locking device.

✎ The locking device has to be purchased separately. ✎ The location of the Kensington slot may be different de pending

on the TV model.

Troubleshooting

If the TV seems to have a problem, ﬁrst review this list of possible problems and solution. If none of these troubleshooting tips apply, visit samsung.com, then click on Support, or call Samsung customer service at 1-800-SAMSUNG.

Problem Possible Solution

Flickering and Dimming If your Samsung Television is ﬂickering or dimming sporadically, you may need to disable some of its energy efﬁcient

Component Connections / Screen Color

Screen Brightness If you ﬁnd that the colors on your Samsung TV are correct but just a little too dark or bright, there are some settings

Unwanted Powering off If your Samsung TV appears to turn off by itself, there may be an issue with either your Timer settings or your Eco

Stand Installation y If you have any trouble in assembling the stand, refer to “Install the Stand” in the Wall Mount & Stand Quick setup

features like the Energy Saving feature. Follow the steps below with your remote to turn these features off or on.

y Energy saving : MENU → Setup → Eco Solution → Energy Saving →Select Settings

If you ﬁnd that the color on your Samsung television’s screen is not correct or black and white, ﬁrst run a Self Diagnosis Test on the TV to make sure there are no device issues.

y Self Diagnosis : MENU → Support → Self Diagnosis → Picture Test

y If the test is ok, try making sure ;

y Your connections are all consistent. For example, if you’ve used the AV In jack on your TV, make sure you have

used the AV Out jack on your video source.

y Try making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled

Pb, Pr, and Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the video source to the blue Pb jack on the TV, the red Pr jack on the source to the red Pr jack on the TV.

you should check before calling for a repair.

y Backlight, Contrast, Brightness, Sharpness, Color, Tint (G/R) and so on. Go to “Picture” in the Menu, and

then try adjusting these options.

friendly No Signal Power Off feature.

First make sure the Sleep Timer is not accidentally set. The Sleep Timer lets you fall asleep with the TV still on knowing that it will turn off after a certain period of time and not waste energy.

y Sleep Timer : MENU → Setup → Time → Sleep Timer

If the Sleep Timer is not activated, you may have engaged the No Signal Power Off or Auto Power Off feature.

y No Signal Power Off : MENU → Setup → Eco Solution → No Signal Power

y Auto Power Off : MENU → Setup → Eco Solution → Auto Power Off

guide.

- 10 -- 9 -

Trouble Powering On Before you turn the TV on, ﬁnd the red light on the right or left bottom of your TV. Press the power on button

Cannot ﬁnd a channel • Re-run Plug & Play or run Auto Program. (go to MENU - Channel - Auto Program)

Poor Picture First, perform the Picture Test and to see if your TV is displaying the test image properly.

The TV image does not look as good as it did in the store.

The picture is distorted: macroblock error, small block, dots, pixelization.

Color is wrong or missing. • If you’re using a component connection, make sure the component cables are connected to the correct jacks.

There is poor color or brightness. • Adjust the Picture options in the TV menu. (go to Picture Mode / Color / Brightness / Sharpness)

There is a dotted line on the edge of the screen.

The picture is black and white. • If you are using an AV composite input, connect the video cable (yellow) to the Green jack of Component on the

When changing channels, the picture freezes or is distorted or delayed.

Sound Problems Perform the Sound Test to conﬁrm that your TV audio is properly operating.

There is no sound or the sound is too low at maximum volume.

The picture is good, but there is no sound.

The speakers are making an inappropriate noise.

No Picture, No Video

The TV will not turn on. • Make sure the AC power cord is securely plugged into the wall outlet and the TV.

The TV turns off automatically. • Ensure the Sleep Timer is set to Off in the Time menu.

There is no picture/video. • Check the cable connections. (Remove and reconnect all cables connected to the TV and external devices).

[T24E310-ZA]BN68-06997D-00ENG.indb 2 2015-04-09 오전 9:05:40

on the TV or remote and the light should blink about 5 times before the TV turns on.

If you ﬁnd that you are having trouble powering on your Samsung television, there are a number of things to check it before making a call to the service department.

If you’re sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If you have a cable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting a signal. To test the signal output of your cable or satellite box, press the guide or info button on the cable or satellite box remote control. If the screen displays the guide or info data, the problem is caused by the box.

Go to MENU - Support - Self Diagnosis - Picture Test If the test image is properly displayed, the poor picture may be caused by the source or signal.

• If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD (high deﬁnition) picture quality.

• Cable/Satellite subscribers: Try HD channels from the channel line up.

• Air/Cable Antenna connection: Try HD channels after running Auto Program.

✎ Many HD channels bro adcast up scaled SD (Stan dard Definition) content. The picture q uality of up

scale d SD content is low.

• Adjust the Cable/Set top box video output resolution to 1080i or 720p.

• Compression of video contents may cause picture distortion, especially on fast moving pictures such as those in

sports and action movies.

• A weak signal can cause picture distortion. This is not a TV problem.

• Mobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels.

Incorrect or loose connections may cause color problems or a blank screen.

• Adjust the Energy Saving option in the TV menu. (go to MENU - Setup - Eco Solution - Energy Saving )

• Try resetting the picture to the default picture settings. (go to MENU - Picture - Picture Reset)

• If the picture size is set to Screen Fit, change it to 16:9.

• Change the cable/satellite box resolution.

T V.

• If connected to a cable box, please try to reset it. (Reconnect the AC cord and wait until the cable box reboots. It may take up to 20 minutes)

• Set the output resolution of the cable box to 1080i or 720p.

(go to MENU - Support - Self Diagnosis - Sound Test) If the audio is OK, the sound problem may be caused by the source or signal.

• Check the volume of the device (Cable/Sat Box, DVD, Blu-ray, etc.) connected to your TV.

• If you are using an external device, check the device’s audio output option Ex. you may need to change your

cable box’s audio option to HDMI if the box is connected to your TV using an HDMI cable.

• Reboot the connected device by reconnecting the device’s power cable.

• Check the cable connections. Make sure a video cable is not connected to an audio input.

• For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.

• Perform the Sound Test as explained above.

• Make sure the wall outlet is working.

• Try pressing the POWER button on the TV to make sure the problem is not the remote.

If the TV turns on, refer to ‘Remote control does not work’ below.

• If your PC is connected to the TV, check your PC power settings.

• Make sure the AC power cord is plugged securely into the wall outlet and the TV.

• When you are watching TV connected to an antenna or cable connection, the TV will turn off after 10 - 15 minutes

if there is no signal.

• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.

• Make sure your connected devices are powered on.

• Be sure to select the correct input source by pressing the SOURCE button on the remote control.

• Reboot the connected device by reconnecting the device’s power cable.

RF (Cable/Antenna) Connection

The TV is not receiving all channels. • Make sure the coaxial cable is connected securely.

No Caption on digital channels. • Check the Caption Setup menu. Try changing Caption Mode Service 1 to CC1.

The picture is distorted: macroblock, error, small block, dots, pixelization.

Others

Purple/green rolling horizontal bars and buzzing noise from the TV speakers with Component cable connection.

The picture will not display in full screen. • HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.

The remote control does not work. • Replace the remote control's batteries. Make sure you insert them with the polarity (+/–) correct .

The cable/set top box remote control does not turn the TV on or off, or adjust the volume.

A “Mode Not Supported” message appears.

Caption on the TV menu is greyed out. • You cannot select Caption in the TV menu when watching content from a device connected via HDMI or

There is a plastic smell from the TV. • This smell is normal and will dissipate in a few days.

TV Signal Strength is unavailable in the Self Diagnosis Test menu.

TV is tilted to the right or left side. • Remove the stand base from the TV and reassemble it.

The Channel menu is grey out (unavailable).

Your settings are lost after 5 minutes or every time the TV is turned off.

You have intermittent loss of audio or video.

You see small particles when you look closely at the edge of the frame of the TV.

POP (TV’s internal banner ad) appears on the screen.

• Run Auto Program to add available channels to the channel list.

go to MENU - Channel - Auto program then select Auto and make sure the correct Cable TV signal type is set in the menu. There are 3 options. (STD, HRC and IRC)

• Verify the antenna is positioned correctly.

• Some channels may not have caption data.

• Compression of video contents may cause picture distortion, especially on fast moving pictures such as those in

sports and action movies.

• A weak signal can cause picture distortion. This is not a TV problem.

• Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the set-

top-box has a grounding issue. Replace the Component video cables with an HDMI connection.

• Black bars on the top and bottom appear when movies that have aspect ratios different from your TV play on the T V.

• Adjust the picture size option on your external device or change the TV to full screen.

• Clean the transmission window located on the top of the remote control.

• Try pointing the remote directly at the TV from 5~6 feet away.

• Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for

the SAMSUNG TV code.

• Check the supported resolution of the TV and adjust the external device’s output resolution accordingly. Refer to resolution settings in this manual.

Component.

• Caption must be activated on the external device.

• This function is only available for digital channels received through an Antenna / RF/Coax connection.

• The Channel menu is only available when you select the TV source.

• If TV is in the Store Demo mode, it will reset audio and picture settings every 5 minutes. Please change from

Store Demo mode to Home Use mode using the Plug & Play procedure. Press the SOURCE button to select TV mode, go to MENU → Setup → Plug & Play → ENTER

• Check the cable connections and reconnect them.

• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are ﬂexible

enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.

• This is part of the product’s design and is not a defect.

•

• Select Home Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup).

✎ This TF T LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may

be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

✎ Watch these troubleshooting on video at www.samsung.com/spsn. ✎ Some functions and pictures shown in this manual are available on specific models only. ✎ You can keep your T V in optimum condition by upgrading it with the latest firmware from the Samsung web site (samsung.com

→ Support → Downloads). To upgrade, download the firmware to your computer, copy the firmware file to a USB memory stick, inser t the USB memory stick into the T V's USB slot, and then select Support > Sof tware Upgrade in the TV's me nu.

- 14-- 13 -

Storage and Maintenance

If a sticker was attached to the TV screen, some debris can remain af ter you remove the sticker. Please clean it before watching

✎

th e T V.

✎ The exterior and scre en of the product can get scratched during cleaning. Be sure to wipe the exterior and scree n carefully using

a soft cloth to prevent scratches.

Do not spray water directly onto the product. Any liquid that goes into the product may cause a failure, ﬁre, or electric shock.

License

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.0 Channel is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.

Manufactured under a license from U.S. Patent No’s: 6,285,767, 8,027,477, 5,319,713, 5,333,201, 5,638,452, 5,771,295, 5,970,152, 5,912,976, 7,200,236, 7,492,907, 8,050,434, 7,720,240, 7,031,474, 7,907,736 and 7,764,802. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & DTS Studio Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.

The terms HDMI and HDMI High-Deﬁnition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Open Source License Notice

Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com) Open Source License Notice is written only English.

To send inquiries and requests for questions regarding open sources, contact Samsung via Email (oss.request@samsung.com).

■

This product uses some software programs which are distributed under the Independent JPEG Group.

ICU License - ICU 1.8.1 and later

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation ﬁles (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, provided that the above copyright notice(s) and this permission notice appear in all copies of the Software and that both the above copyright notice(s) and this permission notice appear in supporting documentation.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder.

All trademarks and registered trademarks mentioned herein are the property of their respective owners.

- 11 -

- 15 -

Clean the product with a soft cloth dampened with in a small amount of water. Do not use a ﬂammable liquid (e.g. benzene, thinners) or a cleaning agent.

- 12 -

Speciﬁcations

Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity

Model Name LT24E310ND

Display Resolution 1366 x 768

Screen Size (Diagonal)

Sound Output

Dimensions (W x H x D) Body

With stand

Weight Without Stand With Stand

✎ Design and specifications are subject to change without prior notice. ✎ This device is a Class B digital apparatus. ✎ For information about the power required and more about power consumption, refer to the label attached to the product. ✎ Typical power consumption is measured according to Energy Star Program requirements for televisions. ✎ Dispose unwanted electronics through an approved recycler. To find the neare st recycling location, go to our website: www.

samsung.com/recyclingdirect or call, (877) 278-0799.

■

JACK PANEL DETAIL / REAR VIEW

NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors.

50°F to 104°F (10°C to 40°C)

10% to 80%, non-condensing

-4°F to 113°F (-20°C to 45°C ) 5% to 95%, non-condensing

24" Class

(23.6" measured diagonally)

5 W x 2

22.1 x 13.4 x 2.1 inches

(561.1 x 340.0 x 52.3 mm)

22.1 x 14.8 x 4.9 inches

(561.1 x 376.1 x 123.3 mm)

7.74 lbs (3.51 kg)

8.44 lbs (3.83 kg)

- 16 -