Samsung SPF-07N User Manual

Safety Symbols

Power | Installation

Safety Symbols

Make sure to follow the directions below to prevent accidents and damage to the product by using the product correctly.

Failure to follow the accompanying directions may lead to serious injury or death.

Using and

Cleaning

Power

Safety Symbols

Insert the power plug correctly until it is firmly in place.

Do not use a damaged power plug, cord or outlet, as this may cause electric shock

or fire.

Do not touch the power plug with wet hands, as this may cause electric shock.

Power | Installation

Failing to do so, may cause fire.

Using and

Cleaning

Do not connect more than one appliance to a single outlet, as an overheated outlet

may cause fire.

Do not use force to pull the power cord.

Don't place anything heavy on the power cord, as this may cause electric shock or

fire.

Make sure to turn the power off and disconnect the power plug from the outlet

before moving the product. Make sure to disconnect the connection cables from

other devices as well.

Moving the product without disconnecting the power cord may damage it while

moving, and may cause electric shock or fire.

Hold and pull out the plug by its body when disconnecting it from the outlet, as

pulling the plug out by the cord may cause it to be damaged.

Failing to do so, may cause fire, or the product may not turn on normally.

Ensure that the power plug is disconnected before cleaning the product.

Failing to do so, may cause electric shock or fire.

Do not let water come into contact with or enter the power adapter, as this may

cause electric shock or fire.

It is highly recommended not using the product outdoors in snowy or rainy weather,

or near any water.

When cleaning the floor with water, avoid any water contact with the power adapter.

Do not place the power adapter near a heater, as this may cause fire.

Installation

Safety Symbols

Power | Installation

Using and

Cleaning

When installing the product on a cabinet or shelf, do not let the front end of the

product project beyond its front edge.

Failing to do so, may cause the product to fall, resulting in a product malfunction or

personal injury.

Do not place the power cord near a heater, as the power cord may melt, causing

electric shock or fire.

Do not install the product in a location exposed to oil, smoke, moisture, water, or

rainwater, or in a car.

Any contact of these materials with the product may cause electric shock or fire.

Disconnect the power plug when there is thunder or lightning.

Failing to do so, may cause electric shock or fire.

Place the product down gently when installing it.

Failing to do so, may cause product damage or personal injury.

void dropping the product when moving, as this may cause product damage or

personal injury.

Do not install the product in a location easily reached by children.

As the product may fall and cause personal injury.

Safety Symbols

Power | Installation

Using and

Cleaning

Using and Cleaning

Do not insert any metal objects such as chopsticks, wire, or gimlets, or flammable

items such as paper or matches into the terminals at the back of the product, as

this may cause electric shock or fire.

If water or any foreign substance enters the product, make sure to turn the product

off disconnect the power plug from the outlet, and contact a service center.

Never disassemble, repair, or modify the product yourself.

If you need to repair your product, contact a service center. Failing to do so, may

cause electric shock or fire.

If you hear a strange sound, smell anything burning, or see smoke, disconnect the

power plug immediately and contact a service center.

Failing to do so, may cause electric shock or fire.

lways remove dust and water from the pins and connections of the power plug.

Failing to do so, may cause electric shock or fire.

We recommend contacting a service center at least once a year for cleaning the

inside of the product.

If dust remains inside the product for a long time, the product may malfunction.

When cleaning the product, first disconnect the power plug and clean it with a

soft, dry cloth.

Do not use any chemicals such as benzene, alcohol, thinners, mosquito repellant,

aromatic, lubricant, detergent or wax.

When not using the product for a long time, make sure to disconnect the power

plug.

Heavy accumulated dust may generate heating or ignition, causing electric shock or

fire.

If the product needs to be installed to a particular location, rather than under

general conditions, make sure to contact one of our service engineers about the

installation as the product may encounter serious quality problems due to its

environment.

his refers to places exposed to conditions such as heavy fine dust, chemicals, high or

low temperature, moisture, or when the product needs to be used continually without

a break over a long time.

If the product has been dropped or the product casing is damaged, turn it off and

disconnect the power plug.

Using the product without verifying that it has not been damaged may cause electric

shock or fire. Please contact a service center.

Features| Components

Front

Back

Side

(Buttons)

Features

Image display solutions through networking

ou can view digital images without turning on your PC or printing out images.

Images stored by a web content provider such as Server are transmitted to your digital photo frame via a network.

(Server provides interoperability allowing you to send photos from your cell phone or photos on a web site to your

digital photo frame via a photo (mms) mail.)

With a networked digital photo frame, you can collect several of your photo albums and family albums into

one location.

This digital photo frame uses images stored on Server. You do not need a mass storage device to manage your

photos. This provides a clean and convenient way to manage your photos.

Enjoy your photos using a variety of effects

With your networked digital photo frame, you can also use various effects that Server provides such as decorating

photos, adding music, and creating an image set.

ou can send your photos to a networked digital photo frame of a family member or friend at a remote location.

Expand the memory capacity with a memory card. Enjoy stored images immediately.

By connecting a CF or SD/MMC memory card of your digital camera to your digital photo frame, you can enjoy the

images on your digital photo frame quickly and easily. This also provides a way to expand the memory capacity of

your digital photo frame.

Side

Stylish design

With its sleek and clean, high class design, your digital photo frame doubles as an ornament for your desk or table.

90 degree rotating stand allows both horizontal and vertical installations.

Features| Components

Please check that all components are contained in the delivered package.

If anything is omitted, contact the local distributor where the product was purchased. For optional items, contact a service center.

Never use a power adapter other than the adapter provided with the product.

Front

Back

Side

(Buttons)

Side

Components

Manual

Cables

Digital Photo Frame

(Colors may differ for each product.)

Quick Start Warranty User Manual

Cleaning cloth

LAN cable

Power cord

Sold separately

USB cable

(A-B type)

Power Adapter

CF card SD/MMC card

Features| Components

Front

Back

Side

(Buttons)

Side

Front

Back

Power

Indicator

Features| Components

Shows the power status.

When the product is powered on, the power light turns on.

Front

Back

Side

(Buttons)

Side

POWER Connect the power adapter to this jack. Connect the power cord to the power terminal

of the power adapter.

LAN If your digital photo frame is connected to a Server site via the LAN, you can download

its contents to your digital photo frame.

USB Connect a PC or an external device using a USB cable.

Up stream

terminal

Down stream

terminal

Make sure to use the USB cable (A-B type) provided with the product when

connecting your digital photo frame to a PC through the up stream terminal.

Connect your digital photo frame to a PC's USB terminal with

a USB cable.

Connect your digital photo frame to a USB-supporting storage

device with a USB cable.

Speaker

Stand

Sliding Prevention

Holder

Features| Components

Side (Buttons)

ou can listen to music files and movies without additionally installing a speaker.

90 degree rotating stand allows both horizontal and vertical installations. If your

digital photo frame is installed vertically, you can rotate your photos using the rotation

function to fit to the vertical installation.

Supports the product so that it stays firmly in place on slippery surfaces.

Front

Back

Side

(Buttons)

Side

Adj

[] Power Button

[MENU] Menu Button Displays the menu at the center bottom of the screen.

[ ] Brightness Button

[] Up Button

[] Left Button

[ ] Right Button

[VOL] Volume Button

[] Down Button

[ ] Select Button

[SHOW] Slide Show

Button

Features| Components

Turns the product on or off.

usts the brightness when displaying photos or playing movies.

Moves the selected frame in the menu up.

Moves the selected frame in the menu to the left.

Moves the selected frame in the menu to the right.

usts the sound volume when playing music files or movies.

Moves the selected frame in the menu down.

Selects a file to play back, a setting in the menu, or an item.

Files are displayed in thumbnails at the bottom of the screen during

playback. To play a file, use the Right and Left buttons to select a file and press the /SHOW button.

Front

Back

Side

(Buttons)

Side

+ 23 hidden pages