Samsung SP42Q2HL User Manual

............................................................................................................................

SP42Q2HL SP47Q2HL SP52Q2HL

SP54T8HL

PROJECTION TELEVISION

BP68-00373A-01

.............

√

Owner’s Instructions

This device is a Class B digital apparatus.

Important Warranty Information Regarding Television Format Viewing

Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format full-motion video. The images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving. Displaying stationary graphics and images on screen, such as the dark top and bottom letterbox bars (wide screen pictures), should be limited to no more than 15% of the total television viewing per week.

Wide screen format televisions (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature, and constantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on non-expanded standard format television video and programming, should be limited to no more than 15% of the total television viewing per week.

Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying any stationary images that exceed the above

guidelines can cause uneven aging of picture tubes (CRTs) that leave subtle, but permanent burned-in ghost images in the television picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On television models that offer picture sizing features, use these controls to view the

different formats as a full screen picture.

Be careful in the selection and duration of television formats used for viewing. Uneven CRT aging as a result of format selection and use, as well as other burned-in images, is not covered by your Samsung limited warranty.

English - 2

Chapter 1: Your New Digital TV .................... 5

List of Features .......................................................................................... 5

Accessories ................................................................................................ 5

Familiarizing Yourself with Your New TV .................................................. 6

Control Buttons .............................................................................. 6

Connection Jacks (Side or Front) .................................................... 7

Connection Jacks (Rear).................................................................. 8

Remote Control .............................................................................. 9

Chapter 2: Installation .................................... 10

Connecting VHF and UHF Antennas ........................................................ 10

Antennas with 300-ohm Flat Twin Leads ........................................ 10

Antennas with 75-ohm Round Leads .............................................. 11

Separate VHF and UHF Antennas .................................................. 11

Connecting Cable TV ................................................................................ 12

Cable without a Cable Box.............................................................. 12

Cable with a Cable Box that Descrambles All Channels .................. 12

Connecting to a Cable Box that Descrambles some Channels ........ 13

Connecting a VCR...................................................................................... 14

Connecting a Second VCR to Record from the TV .......................... 14

Connecting a DVD Player .......................................................................... 15

Connecting to Y, PB, PR.................................................................. 15

Connecting to Regular Audio and Video Jacks ................................ 15

Connecting a Digital TV Set-Top Box ........................................................ 16

Connecting to Y, PB, PR.................................................................. 16

Connecting a Camcorder............................................................................ 16

Installing Batteries in the Remote Control .................................................. 17

Chapter 3: Operation ...................................... 18

Turning the TV On and Off........................................................................ 18

Plug & Play Feature .................................................................................. 18

Viewing the Menus and On-Screen Displays.............................................. 20

Viewing the Menus.......................................................................... 20

Viewing the Display ........................................................................ 20

Selecting a Menu Language ........................................................................ 21

Adjusting the Screen Automatically (Self Focus) ........................................ 22

Deactivating the Automatic Execution of the Self Focus.................. 23

Removing the “Self Focus” Message from the Display .................... 23

Memorizing the Channels .......................................................................... 24

Selecting the Video Signal Source.................................................... 24

Storing Channels in Memory (Automatic Method).......................... 25

Adding and Erasing Channels .................................................................... 26

Changing Channels .................................................................................... 27

Using the Channel Buttons.............................................................. 27

Using the Number Buttons.............................................................. 27

Using the Previous Channel ............................................................ 27

Selecting Your Favorite Channels .............................................................. 28

To Store Your Favorite Channels .................................................... 28

To View Your Favorite Channels...................................................... 28

Labeling the Channels................................................................................ 29

English - 3

CONTENTS

Chapter 3: Operation

Picture Control .......................................................................................... 30

Customizing the Picture.................................................................. 30

Using Automatic Picture Settings .................................................... 31

Sound Control............................................................................................ 32

Adjusting the Volume...................................................................... 32

Using the MUTE Button.................................................................. 32

Customizing the Sound .................................................................. 32

Using Automatic Sound Settings .................................................... 33

Setting the Clock........................................................................................ 34

Viewing an External Signal Source ............................................................ 35

Setting the Signal Source .............................................................. 35

Assigning Names to External sources .............................................. 36

(continued)

............................ 30

Chapter 4: Special Features............................ 37

Fine Tuning Channels ................................................................................ 37

Changing the Screen Size (Wide Mode) .................................................... 38

Changing the Screen Size (4:3 Mode) ........................................................ 39

Digital Noise Reduction ............................................................................ 40

Selecting the Color Tone ............................................................................ 41

Setting the Blue Screen Mode .................................................................... 42

Freezing the Picture .................................................................................. 42

Choosing a Multi-Channel Sound (MTS) track .......................................... 43

Auto Volume .............................................................................................. 44

Setting The On/Off Melody ........................................................................ 44

BBE ............................................................................................................ 45

Viewing Closed Caption Information ........................................................ 46

Setting the On/Off Timer............................................................................ 48

Setting the Sleep Timer .............................................................................. 49

Customizing Your Remote Control ............................................................ 50

Setting Up Your Remote Control to Operate Your VCR

(Cable box or DVD player).............................................................. 50

Remote Control Codes .................................................................... 51

Chapter 5: Troubleshooting ............................ 52

Identifying Problems .............................................................................. 52

Appendix .......................................................... 53

Cleaning and Maintaining Your TV ........................................................ 53

Using Your TV in Another Country ........................................................ 53

Specifications .......................................................................................... 53

English - 4

Chapter One

YOUR NEW TV

List of Features

Your TV was designed with the latest technology. This TV is a high-performance unit that includes the following special features:

• Easy-to-use remote control

• Easy-to-use on-screen menu system

• Automatic timer to turn the TV on and off

• Adjustable picture and sound settings that can be stored in the TV’s memory

• Automatic channel tuning for up to 181 channels

• A special filter to reduce or eliminate reception problems

• Fine tuning control for the sharpest picture possible

• A built-in multi-channel sound decoder for stereo and bilingual listening

• Built-in, dual channel speakers

• A special sleep timer

• Component Video Input jacks to obtain a sharper image from external sources

• Adjusting the Screen Automatically (Self Focus)

Accessories

Once you have unpacked your TV, check to make sure that you have all the parts shown here. If any piece is missing or broken, call your dealer.

Remote Control

(BP59-00058C)/

AAA Batteries

(4301-000103)

Holder-Caster

(BP61-00447C)

(SP52Q2HL/SP54T8HL)

English - 5

Owner’s Instructions (1)/ Safety Guide Manual (1)/

YOUR NEW TV

Familiarizing Yourself with Your New TV

Control Buttons

You can control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control.

• The actual configuration on your TV may be different, depending on your model.

SP42Q2HL SP47Q2HL SP52Q2HL

SP54T8HL

POWER

Press to turn the TV on and off.

Stand-By Indicator

Lights up when you turn the power off.

- Power Off ; Red

- Power On ; Off

- Timer On ; Green

Remote Control Sensor

Aim the remote control towards this spot on the TV.

SOURCE

Press to switch between viewing TV programs and signals from connected components.

Press to see an on-screen menu of your TV's features.

Ø+ VOL –

Press to lower or raise the volume and to select items when using the on-screen menu.

∏

Press to change channels and move between items on the on-screen menu.

” (

Enter)

While using the on-screen menus, press to activate (or change) a particular item.

English - 6

YOUR NEW TV

Connection Jacks (Side or Front)

You can connect an A/V component that is used only occasionally, such as a camcorder or video game. For information on connecting equipment, see page 16.

SP42Q2HL SP47Q2HL

SP52Q2HL

SP54T8HL

S-VIDEO Input

Connect an S-Video signal from a camcorder or video game.

VIDEO Input

Connect the video signal from a camcorder or video game.

AUDIO Input

Connect the audio signals from a camcorder or video game.

English - 7

YOUR NEW TV

Connection Jacks (Rear)

Use the rear panel jacks to connect an A/V component that will be connected continuously, such as a VCR or a DVD player. For more information on connecting equipment, see pages 10~16.

Antemma terminal

Connect to an antenna or a cable TV system.

Audio/Video Output jacks

Connect to the audio/video input jacks of a recording VCR.

Video Input jacks

Connect to the video output jacks of VCRs, DVD players and similar devices

English - 8

Audio Input jacks

Connect to the audio output jacks of VCRs, DVD players and similar devices.

COMPONENT Input jacks (Y, PB, PR, AUDIO-L/R)

Connect to the audio and video outputs of DVD or DTV Set-Top Box. 480i/480p/1080i Y,PB and PR video signal outputs are available.

YOUR NEW TV

Remote Control

You can use the remote control up to about 23 feet from the TV. When using the remote control, always point it directly at the TV. You can also use your remote control to operate your Set-Top box, VCR, Cable box or DVD player. See pages 50~51 for details.

POWER

Turns the TV on and off.

P.SIZE

Press to change the picture size.

FAV. CH

Press to switch between your favorite channels.

Number buttons

Press to select channels directly on the TV.

+100

Press to select channels over 100. For example, to select channel 121, press the “+100”, then press the “2” and “1”.

MUTE

Press to temporarily cut off the sound.

∏

VOL +, VOL -

Press to increase or decrease the volume.

”

SLEEP

Press to select a preset time interval for automatic shut off.

’

Displays the main on-screen menu.

STILL

Press to stop the action during a particular scene. Press again to resume normal video. The still function doesn’t operate in “Component1” or “Component2” mode.

P.MODE

Adjust the TV picture by selecting one of the preset factory settings (or select your personal, customized picture settings).



BBE

BBE is a built-in effect that adds clarity, punch and dynamics to the sound.

ADD/DEL

Press to add or erase channels in the TV’s memory. Use to memorize or erase the fine tuning after fine tuning channels.

(Favorite Channel)

(Main picture)

CAPTION

Press to view closed caption information.

SET

Used during set up of this remote control, so that it will work compatibly with other devices (VCR, STB, Cable box, DVD, etc.).

RESET

If your remote control is not functioning properly, take out the batteries and press the RESET button for about 2~3 seconds. Re-insert the batteries and try using the remote control again.

MODE

Selects a target device to be controlled by this remote control (i.e., TV, STB, VCR, CABLE or DVD).

PRE-CH

Tunes to the previous channel.

CH , CH

Press to change channels.

SOURCE

Each time the button is pressed, all the inputs connected to the external component jacks will be shown in regular sequence.

INFO

Press to display information on the TV screen.

EXIT

Press to exit the menu.

◊

œ/√/†/…

Control the cursor in the menu.

ENTER

While using the on-screen menus, press ENTER to activate (or change) a particular item.

≠

S.MODE

Adjust the TV sound by selecting one of the preset factory settings (or select your personal, customized sound settings).

–

MTS

(Multichannel Television Sound) Press to choose “Stereo”, “Mono” or “SAP (Secondary Audio Program)”.

—

SELF FOCUS

Press to adjust for the optimum picture set in the factory.

VCR/DVD Controls

Controls VCR/DVD functions: Rewind, Stop, Play/Pause, Fast Forward.

English - 9

Chapter Two

INSTALLATION

Connecting VHF and UHF Antennas

If your antenna has a set of leads that look like this, see “Antennas with 300-ohm Flat Twin Leads,” below.

If your antenna has one lead that looks like this, see “Antennas with 75-ohm Round Leads,” on next page.

If you have two antennas, see “Separate VHF and UHF Antennas,” on next page.

Antennas with 300-ohm Flat Twin Leads

If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300-ohm twin flat leads, follow the directions below.

Place the wires from the twin leads under the screws on the 300-75 ohm adapter (not supplied). Use a screwdriver to tighten the screws.

Plug the adapter into the “ANT IN” terminal on the rear panel.

English - 10

INSTALLATION

Antennas with 75-ohm Round Leads

Plug the antenna lead into the “ANT IN” terminal on the rear panel.

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires a an optional combiner-adapter (available at most electronics shops).

Connect both antenna leads to the combiner.

Plug the combiner into the “ANT IN” terminal on the rear panel.

English - 11

INSTALLATION

Connecting Cable TV

You can connect different cable systems to your TV, including cable without a cable box, and cable with a cable box that descrambles some or all channels.

Cable without a Cable Box

If you want to connect cable, and you do not need to use a cable box:

Plug the incoming cable into the “ANT IN” terminal on the rear panel.

Cable with a Cable box that Descrambles All Channels

œ This terminal might be

Find the cable that is connected to the ANTENNA OUT terminal on your cable box.

labeled “ANT OUT”, “VHF OUT”, or simply “OUT”.

Connect the other end of this cable to the “ANT IN” terminal on the rear panel.

English - 12

INSTALLATION

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.)

œ This terminal might be

Find and disconnect the cable that is connected to the ANTENNA IN terminal on your cable box.

labeled “ANT IN”, “VHF IN”, or simply “IN”.

Connect this cable to a twoway splitter. Connect a coaxial cable between an OUTPUT terminal on the splitter and the IN terminal on the cable box.

Incoming Cable

Splitter

Cable Box

Connect a coaxial cable between the ANTENNA OUT terminal on the cable box and the B-IN terminal on the A/B switch.

RF (A/B)

Switch

Connect another cable between the other OUT terminal on the splitter and the A-IN terminal on the RF (A/B) switch.

Connect the last coaxial cable between the OUT terminal on the RF (A/B) switch and the “ANT IN” terminal on the rear panel.

After you’ve made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B,” you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)

English - 13

INSTALLATION

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 10-13). Skip step 1 if you have not yet connected to an antenna or a cable system.

Connect a coaxial cable between the “ANT IN” terminal on the TV and the ANTENNA OUT terminal on the VCR.

A coaxial cable is usually included with a VCR. (If not, check your local electronics store).

Connect a set of audio cables between the “AV IN 1 (L, R)” (or “AV IN 2 (L, R)”) jacks on the TV and AUDIO OUT jacks on the VCR.

If you have a mono VCR, connect L(mono) to VCR audio out using only one audio cable.

Connect a video cable between the “AV IN 1 (VIDEO)” (or “AV IN 2 (VIDEO)”) jack on the TV and the VIDEO OUT jack on the VCR.

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

• Also, you can connect to “AV 3” on the side panel of TV.

Connecting a Second VCR to Record from the TV

Your TV can send out signals of its picture and sound to be recorded by a second VCR. To do this, connect your second VCR as follows:

Connect a set of audio cables between the “AV OUT (L, R)” jacks on the TV and the AUDIO IN jacks on the VCR.

(The VCR input jacks might be either on the front or rear of the VCR.)

Connect a video cable between the “AV OUT (VIDEO)” jack on the TV and the VIDEO IN jack on the VCR.

Refer to your VCR’s instructions for more information about how to record using this kind of connection.

English - 14

INSTALLATION

Connecting a DVD Player

The rear panel jacks on your TV make it easy to connect a DVD player to your TV.

Connecting to Y, PB, P

Connect a set of audio cables between the “COMPONENT IN 1 (L, R)” (or “COMPONENT IN 2 (L, R)”) jacks on the TV and the AUDIO OUT jacks on the DVD player.

Connect a set of video cables between the “COMPONENT IN 1 (Y, PB, PR)” (or “COMPONENT IN 2 (Y, PB, PR)”) jacks on the TV and the VIDEO OUT (Y, PB, PR) jacks on the DVD player.

For an explanation of Component video, see your DVD player’s owner’s instruction.

Connecting to Regular Audio and Video Jacks

Connect a set of audio cables between the “AV IN 1 (L, R)” (or “AV IN 2 (L, R)”) jacks on the TV and the AUDIO OUT jacks on the DVD player.

Connect a video cable between the “AV IN 1 (VIDEO)” (or “AV IN 2 (VIDEO)”) jack on the TV and the VIDEO OUT jack on the DVD player.

• Also, you can connect to “AV 3” on the side panel of TV.

English - 15

INSTALLATION

Connecting a Digital TV Set-Top Box

The rear panel jacks on your TV make it easy to connect a Set-Top Box to your TV.

Connecting to Y, PB, P

Connect a set of audio cables between the “COMPONENT IN 1 (L, R)” (or “COMPONENT IN 2 (L, R)”) jacks on the TV and the AUDIO OUT jacks on the Set-Top Box.

Connect a set of video cables between the “COMPONENT IN 1 (Y, PB, PR)” (or “COMPONENT IN 2 (Y, PB, PR)”) jacks on the TV and the VIDEO OUT (Y, PB, PR) jacks on the Set-Top Box.

For detailed information, refer to the Set-Top Box instruction manual.

Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR. (Also see “Viewing an External Signal Source” on page 35.)

Locate the A/V output jacks on the camcorder. They are usually found on the side or rear of the camcorder.

TV Side Panel (SP42Q2HL)

Connect a set of audio cables between the “AV 3 (L, R)” jacks on the TV and the AUDIO OUT jacks on the camcorder.

If you have mono camcorder, connect L(mono) to camcorder audio out using only one audio cable.

Connect a video cable between the “AV 3 (VIDEO)” (or “SVIDEO”) jack on the TV and the VIDEO OUT jacks on the camcorder.

The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electronics store.) If your camcorder is stereo, you need to connect a set of two cables.

• This figure shows the Standard connector-jack panel. The actual configuration for your TV may be different.

English - 16

INSTALLATION

Installing Batteries in the Remote Control

Slide the back cover all the way out to open the battery compartment of the remote control.

Install two AAA size batteries.

Replace the cover.

œ Make sure to match the “+” and “

–” ends of the batteries with the diagram inside the compartment.

œ Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. (Assuming typical TV usage, the batteries last for about one year.)

• The remote control can be used up to about 23 feet from the TV.

English - 17

+ 38 hidden pages