Samsung SMX-25632 User Manual

Thank you for purchasing a Samsung Video Matrix Switcher.
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.

ENGLISH

Video Matrix Switcher SMX-25632 User’s Manual

P/No. : Z6806-0766-01A

VAN 06. 06

www.samsungtechwin.com
www.samsungcctv.com

•

SAMSUNG TECHWIN CO., LTD.

145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si,
Gyeonggi-do 462-703, Korea
TEL : [phone]~8139 FAX : [phone]

•

SAMSUNG OPTO-ELECTRONICS UK, LTD.

Samsung House, 1000 Hillswood Drive, Hillswood Business
Park Chertsey, Surrey KT16 OPS
TEL : [phone] FAX : [phone]

•

TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD.

7 Pingchang Rd, Nankai Dist. Tianjin 300190, P.R China
TEL : [phone](33821) FAX : [phone]

SALES NETWORK

Perfect Control Solution

Warning

• All work related to the installation of this appliance must be performed by qualified
service personnel or system installers.

- If the product is connected or installed improperly, electric shock, fire, severe injury, and/or

damage can result.

• Please install the product on a completely flat floor.

- Always check the strength and stability of the installation location.

- Do not drop the appliance on the floor. This may result in damage or injury.

Do not attempt to disassemble the appliance. To prevent electric shock, do not remove
screws or covers.

- There are no user-serviceable parts inside. Contact qualified service personnel for

maintenance.

• Never use the appliance in places where there are flammable materials.

- Never use the appliance in places where flammable materials such as gas are used.

• This may result in fire, explosion, and other serious accidents.

• Never touch un-insulated parts with wet hands.

- Touching un-insulated parts with wet hands may result in serious electric shock.

• Never expose the appliance to water or moisture.

- If the appliance gets wet, immediately turn the power off.

- Stop using the appliance if it gets wet. Contact the manufacturer immediately.

• Stop using the appliance if there appears to be any operational problem.

- Immediately turn the power off to the appliance if there is any abnormal condition such as

smoke or unusual smells.

- Continuing to use the appliance under abnormal conditions may result in serious damage.

• Always use the recommended power.

- Using incorrect power source ratings may result in fire, electric shock, or damage.

• Always handle the connection cable with care.

- Never damage or modify the connection cable.

- Do not pull, expose to heat, or place heavy objects on the connection cable.

- Non-observance of these warnings may result in fire, electric shock or damage.

• Use the appliance indoors only.

- Do not place the appliance outdoors or expose it to rain or moisture.

- If dropped in water, the appliance may be corroded and damaged.

• Do not use the appliance where there is excessive dust, smoke, or moisture.

- Using the appliance under such conditions may result in fire, electric shock or serious
damage.

• Do not operate the appliance in temperatures beyond those specified.

- Excessive heat or cold may damage the appliance.

- Always operate the appliance within the recommended temperature range of 0˚C ~ 40˚C.

• Do not place the appliance in direct sunlight.

- This may discolor the appliance.

• Do not apply excessive shock to the appliance.

- Excessive shock may damage the appliance.

If the controller body gets dirty, turn the power off and wipe the surface with a soft cloth.

- Do not use chemical agents such as alcohol or benzene. For detailed information on
upgrading the firmware, please direct your inquiries to the installation vendor.

Caution

Maintenance and Repair

For U.S.A
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercialenvironment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in
which case the user will be required to correct the interference at his own expense.

Safety caution

VIDEO METRIX SWITCHERVIDEO METRIX SWITCHER User’s ManualUser’s Manual

32

Refer all work related to the installation of this appliance to qualified service personnel or
system installers.

Avoid locations near power lines or where high frequency is used.
Placing the product near electromagnetic wave generating communication equipments or
transmission lines may cause the product to malfunction.

Safety caution

Features

2

Features & Distinctions

6

1. System Connection Diagram
1-1. Front
1-2. Back

2. Basic Connection Diagram
2-1. Matrix System
2-2. Matrix Cable
2-3. Extension Matrix
2-4. Setting the SMX-25632 DIP Switch

System Diagram

7
7

7
8
9

9
10
10
11

12
12

12
12
13
13
13

1. Selection of camera and monitor

2. Joystick for Camera Controls

Matrix Settings

12

Check List

17

14
14
14
15
15
15
16
16

MATRIX Features

19

External View

18

Contents

VIDEO METRIX SWITCHER User’s Manual

5

VIDEO METRIX SWITCHER User’s Manual

4

3. AUTO SELECT
3-1. AUTO SELECT Setup
3-2. AUTO SELECT Cancellation
3-3. AUTO SELECT Elimination
3-4. AUTO SELECT RUN/HOLD FUNCTION

4. ID SET
4-1. ID SET Setup
4-2. ID SET ON/OFF Setup1
4-3. DISPLAY POSITION Setup

5. TIME/DATE SET
5-1. TIME/DATE Setup
5-2. ON/OFF Setup
5-3. DISPLAY POSITION Setup