Samsung SM-N930V, SM-N930A, SM-N930P, SM-N930T, SM-N930U User manual
...
SM-N930V/A/P/T/U/
VL/R4/R6/R7/W8
Mobile Device
Common
CONTENTS
1. Safety Precautions
2. Specification
3. Product Function
4. Exploded View and Parts list
5. MAIN Electrical Parts List
6. Level 1 Repair
7. Level 2 Repair
8. Level 3 Repair
9. Reference data
Notice: All functionality, features, specifications,
and other product information provided in this
document, including but not limited to, benefits,
design, pricing, components, performance,
availability, and capabiliti-es of the product are
subject to change without notice. Samsung
reserves the right to alter this doc-ument or the
product described herein at anytime, without
obligation to provide notification of such
changes.
This Service Manual is a property of Samsung Electronics Co.,Ltd.
Any unauthorized use of Manual can be punished under applicable
International and/or domestic law.
Samsung Electronics Co.,Ltd
ⓒ
2016. 08. Rev 1.0
2. Specification
2-1. CDMA/LTE General Specification
Tx Freq. range 1850 ~ 1910MHz 824.04 ~ 848.97MHz 777 ~787 MHz 1710~1755 MHz
Rx Freq. range 1930 ~ 1990MHz 869.04 ~ 893.97MHz 1575.42MHz 746 ~ 756 MHz 2110~2155 MHz
Channel Bandwidth 1.23MHz 1.23MHz 2MHz 10 MHz 5, 10, 20 MHz
Channel Spacing 50KHz 30KHz Not Used 180KHz 180KHz
Number of Channel 1200 832 1 50(# of RB) 25, 50, 100
Duplex Separation 80MHz 45MHz - 31MHz 400 MHz
Type of Emission 1M29F9W 1M28F9W -
US PCS CDMA GPS LTE FDD B13 LTE FDD B4
4M53G7D (QPSK)
4M49W7D (16QAM)
4M52G7D (QPSK)
4M50W7D (16QAM)
8M97G7D (QPSK)
8M96W7D (16QAM)
8M99G7D (QPSK)
8M97W7D (16QAM)
13M5G7D (QPSK)
13M5W7D (16QAM)
18M0G7D (QPSK)
18M0W7D (16QAM)
Tx Local Frequency FTx * 0.7999 FTx * 1.6666 -
Rx Local Frequency FRx * 0.8888 FRx * 2 FRx * 2
Frequency Stability
Operating
Temperature
(FRX-80MHz)±150Hz
-30℃ ~ +60℃ -30℃ ~ +60℃ -30℃ ~ +60℃ -30℃ ~ +60℃ -30℃ ~ +60℃
(FRX-45MHz)±300Hz
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
2. Specification
Tx Freq. range 1850 ~ 1910 MHz 824 ~ 849 MHz
Rx Freq. range 1930 ~ 1990 MHz 869 ~ 894 MHz
Channel Bandwidth 5, 10, 20 MHz 5, 10 MHz
Channel Spacing 180KHz 180KHz
Number of Channel 25, 50, 100 25, 50
Duplex Separation 80 MHz 55 MHz
4M50G7D (QPSK)
4M50W7D (16QAM)
8M98G7D (QPSK)
Type of Emission
8M96W7D (16QAM)
13M5G7D (QPSK)
13M5W7D (16QAM)
18M0G7D (QPSK)
18M0W7D (16QAM)
LTE FDD B2 LTE FDD B5
4M53G7D (QPSK)
4M51W7D (16QAM)
8M99G7D (QPSK)
8M97W7D (16QAM)
Tx Local Frequency
Rx Local Frequency
Frequency Stability
Operating Temperature -30℃ ~ +60℃ -30℃ ~ +60℃
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
2. Specification
2-2. GSM/WCDMA General Specification
Freq.
Band[MHz
]
Uplink/
Downlink
ARFCN
range
Tx/Rx
spacing
Mod. Bit
rate/
Bit Period
Time Slot
Period/
Frame
Period
GSM850
824~849
869~894
128~251
45MHz 45MHz 95MHz 80MHz 190MHz 80MHz 400MHz 45MHz 45MHz
270.833kb
ps
3.692us
576.9us
4.615ms
EGSM
900
880~915
925~960
0~124
& 975~10
23
270.833k
bps
3.692us
576.9us
4.615ms
DCS1800 PCS1900
1710~178
5
1805~188
0
512~885 512~810
270.833kb
ps
3.692us
576.9us
4.615ms
1850~191
0
1930~199
0
270.833k
bps
3.692us
576.9us
4.615ms
WCDMA
2100
1922~197
7
2112~216
7
UL:
9612~988
8
DL:
10562~10
838
3.84Mcps 3.84Mcps 3.84Mcps 3.84Mcps 3.84Mcps
FrameLen
gth:
10ms
Slotlength
:
0.667ms
WCDMA
1900
1852~190
7
1932~198
7
UL:
9262~953
8
DL:
9662~993
8
FrameLen
gth:
10ms
Slotlength
:
0.667ms
WCDMA
1700
1710~175
5
2110~215
5
UL:
1312~151
3
DL:
1537~173
8
FrameLen
gth:
10ms
Slotlength
:
0.667ms
WCDMA
900
880~915
925~960
UL:
2712~286
3
DL:
2937~308
8
FrameLen
gth:
10ms
Slotlength
:
0.667ms
WCMDA
850
824~849
869~894
UL:
4132~423
DL:
4357~445
FrameLen
gth:
10ms
Slotlength
0.667ms
3
8
:
Modulatio
n
MS Power
Power
Class
Sensitivit
y
TDMA
Mux
Cell
Radius
0.3GMSK 0.3GMSK 0.3GMSK 0.3GMSK
33dBm~5
dBm
5pcl ~
19pcl
-102dBm -102dBm -100dBm -100dBm
8 8 8 8
35Km 35Km 2Km 2Km 2Km 2Km 2Km 2Km 2Km
33dBm~5
dBm
5pcl ~ 19pcl 0pcl ~ 15pcl 0pcl ~ 15pcl
30dBm~0
dBm
30dBm~0
dBm
QPSKHQ
PSK
24dBm~
-50dBm
3(max+24d
Bm)
-
106.7dBm-106.7dBm-106.7dBm -106.7dBm-106.7dBm
8
QPSKHQ
PSK
24dBm~
-50dBm
3(max+24d
Bm)
8 8 8 8
QPSKHQ
PSK
24dBm~
-50dBm
3(max+24d
Bm)
QPSKHQ
PSK
24dBm~
-50dBm
3(max+24d
Bm)
QPSKHQ
PSK
24dBm~
-50dBm
3(max+24d
Bm)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
2. Specification
2-3. GSM Tx Power Class
TX Power
control
level
5 33±2 dBm
6 31±2 dBm
7 29±2 dBm
8 27±2 dBm
9 25±2 dBm
10 23±2 dBm
11 21±2 dBm
12 19±2 dBm
GSM850
TX Power
control
level
5 33±2 dBm
6 31±2 dBm
7 29±2 dBm
8 27±2 dBm
9 25±2 dBm
10 23±2 dBm
11 21±2 dBm
12 19±2 dBm
EGSM900
TX Power
control
level
0 30±3 dBm
1 28±3 dBm
2 26±3 dBm
3 24±3 dBm
4 22±3 dBm
5 20±3 dBm
6 18±3 dBm
7 16±3 dBm
DCS1800
TX Power
control
level
0 30±3 dBm
1 28±3 dBm
2 26±3 dBm
3 24±3 dBm
4 22±3 dBm
5 20±3 dBm
6 18±3 dBm
7 16±3 dBm
PCS1900
13 17±2 dBm
14 15±2 dBm
15 13±2 dBm
16 11±3 dBm
17 9±3dBm
18 7±3 dBm
19 5±3 dBm
13 17±2 dBm
14 15±2 dBm
15 13±2 dBm
16 11±3 dBm
17 9±3dBm
18 7±3 dBm
19 5±3 dBm
8 14±3 dBm
9 12±4 dBm
10 10±4 dBm
11 8±4 dBm
12 6±4 dBm
13 4±4 dBm
14 2±5 dBm
15 0±5 dBm
8 14±3 dBm
9 12±4 dBm
10 10±4 dBm
11 8±4 dBm
12 6±4 dBm
13 4±4 dBm
14 2±5 dBm
15 0±5 dBm
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
3. Operation Instruction and Installation
Main Function
Item Description
OS Android V6.0.1 (Marshmallow)
2G CDMA : BC0/BC1/BC10
2G GSM 850(B5)/900(B8)/1800(B3)/1900(B2)
3G WCDMA : B1/B2/B4/B5/B8
RF
Battery 3,500mAh
Base Band MSM8996 / 2.15GHz, 1.6GHz
Other RF GPS, Glonass, BT 4.2, USB 3.1, WIFI 802.11 a/b/g/n/ac (2.4G+5GHz), NFC, MST
4G(LTE)
- FDD : B2 / B3 / B4 / B5 / B7 / B8 / B13 / B18 / B19 / B20 + B1 / B12 / B17 / B25 / B26 / B29 / B30
- TDD : 38/39/40/41
- TD-SCDMA : B34/B39
Camera
LCD 5.67” Quad HD, 2560 x 1440, dual edge Super AMOLED
RAM 4GB LPDDR4 + 64GB UFS
Sensor
Accessory
12 MP Rear, Dual Pixel, AF
5.0 MP Front
Accelerometer, Barometer, Fingerprint Sensor, Gyro Sensor, Geomagnetic Sensor, Hall Sensor,
HR Sensor, Iris Sensor, Proximity Sensor, RGB Light Sensor
Charger : 5V/2A or 9 V/1.67 A
Data cable : USB Type-C
Earjack : 3.5pi, 4Pin
S-PEN
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
9. Reference Abbreviate
Reference Abbreviate
― AAC: Advanced Audio Coding.
― AVC : Advanced Video Coding.
― BER : Bit Error Rate
― BPSK: Binary Phase Shift Keying
― CA : Conditional Access
― CDM : Code Division Multiplexing
― C/I : Carrier to Interference
― DMB : Digital Multimedia Broadcasting
― EN : European Standard
― ES : Elementary Stream
― ETSI: European Telecommunications Standards Institute
― MPEG: Moving Picture Experts Group
― PN : Pseudo-random Noise
― PS : Pilot Symbol
― QPSK: Quadrature Phase Shift Keying
― RS : Reed-Solomon
― SI : Service Information
― TDM : Time Division Multiplexing
― TS : Transport Stream
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
1.Safety Precautions
1-1. Repair Precaution
Before attempting any repair or detailed tuning, shield the device from RF noise or static
electricity discharges.
Use only demagnetized tools that are specifically designed for small electronic repairs,
as most electronic parts are sensitive to electromagnetic forces.
Use only high quality screwdrivers when servicing products. Low quality screwdrivers can
easily damage the heads of screws.
Use only conductor wire of the properly gauge and insulation for low resistance, because of the low margin
of error of most testing equipment.
We recommend 22-gauge twisted copper wire.
Hand-soldering is not recommended, because printed circuit boards (PCBs) can be easily
damaged, even with relatively low heat. Never use a soldering iron with a power rating of
more than 100 watts and use only lead-free solder with a melting point below 250°C (482°F).
Prior to disassembling the battery charger for repair, ensure that the AC power is disconnected.
Always use the replacement parts that are registered in the SEC system. Third-party replacement parts
may not function properly.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
1.Safety Precautions
1-2. ESD(Electrostatically Sensitive Devices) Precaution
Many semiconductors and ESDs in electronic devices are particularly sensitive to static discharge and can
be easily damaged by it. We recommend protecting these components with conductive anti-static bags
when you store or transport them.
Always use an anti-static strap or wristband and remove electrostatic buildup or dissipate
static electricity from your body before repairing ESDs.
Ensure that soldering irons have AC adapter with ground wires and that the ground wires are properly
connected.
Use only desoldering tools with plastic tips to prevent static discharge.
Properly shield the work environment from accidental electrostatic discharge before opening
packages containing ESDs.
The potential for static electricity discharge may be increased in low humidity environments,
such as air-conditioned rooms. Increase the airflow to the working area to decrease the
chance of accidental static electricity discharges.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
6-1. S/W installation
6-1-1. Required items in order to install S/W
Installation program: Downloader Program (Odin3 v3.12.5.exe)
Mobile Phone
Data Cable
Mobile device specific S/W: Binary files
※ Settings
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
6-1-2. S/W Installation Program (Downloader program)
Open up the S/W Installation Program by executing the "Odin3 v3.12.5.exe"
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
1. Enable the check mark by click on the following options,
- Check Auto Reboot, Re-Partition, and F. Reset Time-
- Check PIT
- Check Nand Erase All
- Check BL, AP, CP, and CSC Files
* Note : "Odin v3.12 or above" checks MD5 checksum just after file selection.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
2. Enter into Download Mode
- Enter into Download Mode by pressing Home button, Volume Down button and Power On/Off
Button simultaneously followed by pressing Volume up button as a direction of the phone.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
3. Connect the device to PC via Data Cable.
Make sure that the one of communication ports [ID:COM] box is highlighted in
sky blue. The device is now connected with the PC and ready to download the
binary files in it.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
4. Start downloading the binary files into the device by clicking Start button on the
screen. The green colored "PASS!" sign will appear on the upper-left box if the
binary files have been successfully downloaded into the device.
5. Disconnect the device from the Data cable.
6. Once the device boots up, you can check the version of the binary file or name
by pressing the following code in sequence;
*#1234#
You can perform Factory Reset by Settings → Accounts → Backup and reset
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
6-2 IMEI writing
6-2-1 Preparation
- New IMEI writing Program has been released.
- Supported Model : Models which CAB files are uploaded on HHPsvc INI File
category, instead of ini file.
- Refer to below IMEI writing procedure.
- H/W
- S/W
① Library Install
②Launcher
③ Runtime File
④Model File
To use Daseul, library files should be installed.
Refer to SVC Bulletin
“(11-82) Daseul (New IMEI writing Program) Library Install
guide_rev1.0”
DASEUL_SVC_Launcher_v3_0_25 or higher
-Uploaded on HHPsvc Notice
1. DASEUL_Runtime_Ver_3.1.139.0.CAB or higher
-Uploaded on HHPsvc Notice
2. Make ‘ModelName’ folder at the same position with
launcher & Runtime file.
Copy Model File under the ‘Model Name’ folder
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
6-2-2 IMEI writing Process
1. Run DASEUL_SVC_Launcher_v3.0.10.exe
2. Select Service Mode
3. Click and Select folder where the Launcher exists
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
4. Select Model
5. Check IMEI and click System Setting
※Once you setup the setting, you don t have to do it again, unless there is change. From second run of the
IMEI program, check IMEI and click Extract & Run.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
6. Check IMEI Write / IMEI Check and click IMEI SVC & Repair Option.
①
②
7. Check SVC , User Ticket No and click OK
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
8. Click Hardware Config
9. Click Port Setting
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
10. Select Port Number and SAVE
11.Click OK to proceed
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
12. Click Model Info and OK when pop-up shows
13. Click OK
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
14. Input SKU_CODE and BUYER, then click Save button.
※ Refer to HHPsvc→IMEI Review to check SKU Code and buyer
15. Input IMEI Number and click Apply
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
16. ① Click Start, and input IMEI writing ID and Password →②input Ticket No
17. Connect the phone to Anyway JIG
※ When you connect the phone, the phone should be turned off.
After connecting the phone, the phone will be booted automatically.
18. IMEI Writing Proceeding
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
19. IMEI Writing Success
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
6-3. RF Calibration
6-3-1. Required items in order to calibrate RF
a. Installation program: RF Calibration Program
- DASEUL_Launcher_v4.0.0.exe
- DASEUL_CAL_ALL_Runtime_3.1.211.0_r00402.CAB
- Model File (SM-N930F_OPEN_CALIBRATION_Ver_3.1.206.7.CAB)
※ It is required to use the latest program.
b. Mobile Phone (DUT)
c. Type-C IF Cable (GH81-11962W)
d. JIG BOX (S103, GH81-12520B)
e. JIG BOX Adapter (GH81-11888K)
f. UART Serial Cable
g. E3632A Power Supply
h. Current Cable
i. R&S CMW500
j. GPIB Cable (2ea)
k. Table of test cables
IF Cable
RF Cable
(Manual)
4 Port Divider
GH81-11962W
USB C type
GH81-11962M GH81-11962U
1.2T, 102mm
SMAP, 300mm
2ea
2ea
GH81-11962A GH81-11962B GH81-11962E
Divider
Divider Cable
50Ω terminator
2ea
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
● Cable setting
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
6-3-2. RF Calibration Program
1. Uninstall DASEL Library and install latest version.
(Daseul_Library_Installer_151217_v2.3.7 or later)
2. Place three files below in the same folder, and Run the RF Calibration Program Launcher,
‘DASEUL_Launcher_v4.0.0.exe'.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
3. Check the 'Calibration' menu, and select 'Extract & Run'.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Loading...