Notice: All functionality, features, specifications,
Common
1. Safety Precautions
2. Specification
3. Product Function
4. Exploded View and Parts list
5. MAIN Electrical Parts List
6. Level 1 Repair
7. Level 2 Repair
8. Level 3 Repair
9. Reference data
and other product information provided in this
document, including but not limited to, benefits,
design, pricing, components, performance,
availability, and capabiliti-es of the product are
subject to change without notice. Samsung
reserves the right to alter this doc-ument or the
product described herein at anytime, without
obligation to provide notification of such
changes.
1. Safety Precautions
1-1. Repair Precaution
Before attempting any repair or detailed tuning, shield the device from RF noise or static
electricity discharges.
Use only demagnetized tools that are specifically designed for small electronic repairs,
as most electronic parts are sensitive to electromagnetic forces.
Use only high quality screwdrivers when servicing products. Low quality screwdrivers can
easily damage the heads of screws.
Use only conductor wire of the properly gauge and insulation for low resistance, because of the low margin
of error of most testing equipment.
We recommend 22-gauge twisted copper wire.
Hand-soldering is not recommended, because printed circuit boards (PCBs) can be easily
damaged, even with relatively low heat. Never use a soldering iron with a power rating of
more than 100 watts and use only lead-free solder with a melting point below 250°C (482°F).
Prior to disassembling the battery charger for repair, ensure that the AC power is disconnected.
Always use the replacement parts that are registered in the SEC system. Third-party replacement parts
may not function properly.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Many semiconductors and ESDs in electronic devices are particularly sensitive to static discharge and can
be easily damaged by it. We recommend protecting these components with conductive anti-static bags
when you store or transport them.
Always use an anti-static strap or wristband and remove electrostatic buildup or dissipate
static electricity from your body before repairing ESDs.
Ensure that soldering irons have AC adapter with ground wires and that the ground wires are properly
connected.
Use only desoldering tools with plastic tips to prevent static discharge.
Properly shield the work environment from accidental electrostatic discharge before opening
packages containing ESDs.
The potential for static electricity discharge may be increased in low humidity environments,
such as air-conditioned rooms. Increase the airflow to the working area to decrease the
chance of accidental static electricity discharges.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
4. Exploded View and Parts List
4-1. Cellular phone Exploded View
QFR01
QBR01
QAR01
QMO01
QCA01
QCA02
QKP01
QME01
QMP01
QCR102
QSP01
QRE01
QCO01
QCR152
QVO01
QCK01
QBC01
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
QBA01
※ SVC REPAIR TAPE
QRT01, QRT02, QRT03, QRT04
5. MAIN Electrical Parts List
Part Code Design Loc Description
0401-001110 D5001 DIODE-SWITCHING
0406-001459 ZD5009,ZD5010 DIODE-TVS
0406-001506 ZD6013 DIODE-TVS
0406-001592 U5002,ZD4006,ZD5001 DIODE-TVS
0406-001640 ZD4004,ZD4005 DIODE-TVS
0406-001690 ZD5003 DIODE-TVS
0406-001709 ZD5002,ZD5007 DIODE-TVS
0406-001728 ZD2001,ZD4001,ZD4003 DIODE-TVS
0406-001762 ZD6007,ZD6008,ZD6009 DIODE-TVS
0406-001762 ZD6010,ZD6011,ZD6012 DIODE-TVS
0406-001763 ZD6001,ZD6002,ZD6003 DIODE-TVS
0406-001763 ZD6004,ZD6005,ZD6006 DIODE-TVS
0406-001781 ZD5004,ZD5005,ZD5006 DIODE-TVS
0406-001781 ZD5008,ZD5011 DIODE-TVS
0601-003511 LED4001 LED
0601-003547 LED4002 LED
1001-001964 U1001,U1013 IC
1001-001999 U1014 IC
1107-002548 U4003 IC-FLASH MEMORY
1201-003786 U2002 IC
1201-003975 U1004 IC
1201-004036 U2005 IC
1201-004103 U1005 IC
1201-004129 U1002 IC
1203-008249 U6007 IC
1203-008395 U6005 IC
1203-008468 U4006 IC
1203-008527 U6004 IC
1203-008693 U1006 IC
1203-008767 U4004 IC
1203-008771 U5001 IC
1203-008859 U6002,U6003 IC
1203-008867 U6006 IC
1203-008951 U6008 IC
1203-008995 U4005 IC
1205-005220 U2001 IC
1205-005561 U1011 IC
1205-005565 UCP301 IC
Confidential and pr oprietary-the contents in this service guide subjec t to change without pr ior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
GH62-00040A SMR6004,SMR6005 PAD GAP-SMD GASKET
GH62-00040A SMR6006,SMR6007 PAD GAP-SMD GASKET
GH62-00042A SMR6001 PAD GAP-SMD GASKET
GH63-09457A SC1001 SHIELDCAN
GH63-14751A SC1002 SHIELDCAN
GH63-14752A SC2002 SHIELDCAN
GH98-37386A SC2003 SHIELDCAN
1105-002710 UCP301UP IC
Please consult the GSPN website (Samsung Portal) for the most recent version of the product's part list.
Confidential and pr oprietary-the contents in this service guide subjec t to change without pr ior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
※
Data Cable : GH39-01710D
6-1. S/W Download
6-1-1. Prepare for S/W Downloading
Installation program: Downloader Program (Odin3 v3.11.exe)
Mobile Phone
Data Cable
Mobile device specific S/W: Binary files
Settings
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
6-1-2. S/W Installation Program (Downloader program)
Open up the S/W Installation Program by executing the "Odin3 v3.11.exe"
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
1. Enable the check mark by click on the following options,
- Check Auto Reboot, Re-Partition, and F. Reset Time
- Check PIT
- Check BOOTLOADER, PDA, PHONE, and CSC Files
* Note : "Odin v3.09 or above" checks MD5 checksum just after file selection.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
2. Enter into Download Mode
- Enter into Download Mode by pressing Volume Down, Home and Power button simultaneously
followed by pressing
- Volume up button as a direction of the phone.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
3. Connect the device to PC via Data Cable.
Make sure that the one of communication ports [ID:COM] box is highlighted in sky blue.
The device is now connected with the PC and ready to download the binary files in it.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
※
4. Start downloading the binary files into the device by clicking Start button on the screen.
The green colored "PASS!" sign will appear on the upper-left box.
If the binary files have been successfully downloaded into the device.
5. Disconnect the device from the Data cable.
6. Once the device boots up, you can check the version of the binary file or name by pressing the
following code in sequence; *#1234#
You can perform Factory Reset by Settings → Accounts → Backup and reset
Caution, Never disconnect during the S/W downloading.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
Library Install
To use Daseul, library files should be installed.
Launcher
DASEUL_SVC_Launcher_v3_0_25 or higher
Runtime File
1. DASEUL_Runtime_Ver_3.1.139.0.CAB or higher
Model File
Copy Model File under the ‘Model Name’ folder
6-2 IMEI writing
6-2-1 Preparation
- New IMEI writing Program has been released.
- Supported Model : Models which CAB files are uploaded on HHPsvc INI File
category, instead of ini file.
- Refer to below IMEI writing procedure.
- H/W
- S/W
①
②
③
④
Refer to SVC Bulletin
“(11-82) Daseul (New IMEI writing Program) Library Install guide_rev1.0”
-Uploaded on HHPsvc Notice
-Uploaded on HHPsvc Notice
2. Make ‘ModelName’ folder at the same position with
launcher & Runtime file.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
6. Level 1 Repair
1. Run DASEUL_SVC_Launcher_v3.0.12.exe
2. Select Service Mode
Model Name
6-2-2 IMEI writing Process
3. Click and Select folder where the Launcher exists
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6. Level 1 Repair
4. Select Model
5. Check IMEI and click System Setting
※
Model Name
Once you setup the setting, you don t have to do it again, unless there is change.
From second run of the IMEI program, check IMEI and click Extract & Run.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice