Samsung SHR-6164PC-GBR, SHR-6164PB-GBR, SHR-6164P5-GBR, SHR-6162P, SHR-6082PA Operating Instructions

...

SHR-6080/6082/6160/6162/6163/6164

8 Channel/16 Channel DVR

User’s Manual

imagine the possibilities

Thanks you for purchasing this Samsung product. To receive a more complete service, please register your product at

www.samsungsecurity.com

overview

FEATURES

This DVR (Digital Video Recorder) employs MPEG-4 video encoding for 8 or 16 channels of camera input and G.723 audio encoding for 4 channels, and supports simultaneous hard disc recording and playback. And also it supports network connectivity, providing remote monitoring from a remote PC by transferring video and audio data.

Provides convenient User Interface

•

8/16 CH Composite Input Connectors

•

Supports CIF(S)/Half D1(M)/Full D1(L) recording formats

•

With the network speciﬁ c codec, network transfer enabled regardless of the recording conditions

•

De-interlacing processor for better picture quality

•

Display of HDD information and status by using HDD SMART

•

CIF(S) Size (NTSC: 352*240, PAL: 352*288) Recording in 240 (NTSC)/200 (PAL) IPS speed (SHR-6163/6164)

•

CIF(S) Size (NTSC: 352*240, PAL: 352*288) Recording in 120 (NTSC)/100 (PAL) IPS speed (SHR-6080/6082/

•

6160/6162)

8/16-channel Loop Through Video port connection

•

Hard Disk overwrite function

•

Mass storage hard disk backup through high-speed USB 2.0

•

Backup function using USB 2.0 ﬂ ash memory and external CD/DVD writer

•

(Internal DVD writer is not available for SHR-6080/6160/6163)

Simultaneous Record and Playback of 8/16-channel video data

•

Various Search Modes (Search By Time, Event, Backup, POS and Motion Detection)

•

Various Recording Modes (Time Lapse, Event, Scheduled Recording)

•

Extended Hard Disk Connection (USB 2.0)

•

Alarm Interface (Input: 8/16, Output: 4, Reset: 1)

•

Remote Monitoring function by Windows Network Viewer (NET-i Pro/Web viewer)

•

2_ overview

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁ ers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. if the provided plug does not ﬁ t into your outlet, consult an electrician for replacement of the obsolete outlet.

10)

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11)

Only use attachments/accessories speciﬁ ed by the manufacturer.

12)

Use only with the cart, stand, tripod, bracket, or table speciﬁ ed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13)

Unplug this apparatus during lightning storms or when unused for long periods of time.

14)

Refer all servicing to qualiﬁ ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

 OVERVIEW

English _3

overview

BEFORE START

This user’s manual provides Information for using DVR such as brief introduction, part names, functions, connection to other equipment, menu setup, and the like. You have to keep in mind the following notices:

•

SEC retains the copyright on this manual.

•

This manual cannot be copied without SEC’s prior written approval.

•

We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of instructions mentioned in this manual.

•

If you want to open the case of your system for checking problems, please consult the expert from the shop where you bought the product.

•

You may download open source codes from the following website: www.samsungsecurity.com.

•

Before installing an additional HDD or connecting an external storage device (USB memory or USB HDD) to this DVR, check the compatibility. Consult your provider for the compatibility list.

Warning

Battery

❖

Exchanging a wrong battery in your product may cause an explosion. Therefore you must use the same type of battery as the one being used in the product. The following are the speciﬁ cations of the battery you are using now.

Normal voltage: 3V

•

Normal capacity: 170mAh

•

Continuous standard load: 0.2mA

•

Operating temperature : -20°C ~ +85°C

•

(-4°F ~ +185°F)

CALIFORNIA USA ONLY

This Perchlorate warning applies only to primary CR (Manganese Dioxide) Lithium coin cells in the product sold or distributed ONLY in California USA.

“Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate.”

❖

Turning off the power while the product is in operation, or taking not permitted actions may cause damage to the hard drive or the product. Also it can cause a dysfunction to the hard disk while using the product. Please turn off the power using the Power button on the front of your DVR. After selecting <OK> in the pop-up menu, you can pull off the power cord. You may want to install a UPS system for safe operation in order to prevent damage caused by an unexpected power stoppage. (Any questions concerning UPS, consult your UPS retailer.)

❖

The guaranteed operating temperature range of this product is 0°C ~ 40°C (32°F ~ 104°F). This product may not work properly if you run right after a long period of storage at a temperature below the guaranteed one. When using the device after a long period of storage at low temperature, place the product at room temperature for a while and run it. Especially for the built-in HDD in the product, its guaranteed temperature range is 5°C ~ 55°C (41°F ~ 131°F). Likewise, the hard drive may not work at a temperature below the guaranteed one.

The Mains plug is used as a disconnect device and shall stay readily operable at any time.



Batteries shall not be exposed to excessive heat such as sunshine, ﬁ re or the like.



System Shutdown

Operating Temperature

Connect the power cord into a grounded oulet.



4_ overview

Standards Approvals

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15



Package Contents

Please unwrap the product, and place the product on a ﬂ at place or in the place to be installed. Please check the following contents are included in addition to the main unit.

Remote Control Mouse Power Cable

 OVERVIEW

NET-i Pro Software / User’s Manual CD User’s Manual RS-485 connector port

Remote Control Battery (AAA) Bracket Rack SATA Cable

(SHR-6082, 6162, 6164 : 16EA) (SHR-6080, 6160, 6163 : 20EA)

HDD Fixing

English _5

overview

OVERVIEW

INSTALLATION

CONNECTING WITH OTHER DEVICE

LIVE

2 Features 3 Important Safety Instructions 4 Before Start 6 Contents 8 Part Names and Functions (Front) 10 Part Names and Functions (Rear) 12 Remote Control

14 Checking the Installation Environment 15 Rack Installation 15 HDD Addition

19 Connecting the Video, Audio, and Monitor 19 Connecting the Network 20 Connecting the USB 20 Connecting POS Device 21 Connecting the Alarm Input/Output 22 Connecting the RS-485 Device

23 Getting Started 25 Live Screen Configuration 29 Live Mode 31 Spot Out 32 Zoom 32 Audio On/Off 32 Freeze 33 Event Monitoring

6_ overview

USING THE DVR

SEARCH & PLAY

34 System Setup 42 Setting the Device 50 Setting the Recording 53 Setting the Event 56 Backup 57 Network Configuration 64 Controlling a PTZ Device

66 Search 69 Playback

WEB VIEWER

70 Introducing Web Viewer 71 Connecting Web Viewer 73 Using Live Viewer 79 Using Search Viewer 83 Viewer Setup 93 About

 OVERVIEW

BACKUP VIEWER

APPENDIX

94 SEC Backup Viewer

96 Product Specification 99 Product Overview 100 Default Setting 103 Troubleshooting

English _7

overview

PART NAMES AND FUNCTIONS (FRONT)

6080

6160/6163

6082

1 3 4

7 6 5

1 3 4

6 5

6162/6164

8_ overview

9 8

1 3 4

7 6 5

6 5

Part Names Functions

ALARM : Lights on when an event occurs.

HDD : Displays the normal access to HDD.

Upon access to HDD, LED repeats on and off.

LED Indicator

Camera Control

REC Starts or ends the recording.

/



►/

/

Direction & Select Button

NETWORK : Displays both network connection and data transfer status.

BACKUP : Displays when Backup is in progress.

REC : Lights on when recording is in progress.

PTZ : Sets PTZ Mode ON/OFF.

ZOOM(TELE) : Sets the screen to the x2 digital zoom.

FREEZE(WIDE) : Runs the FREEZE function in the Live Mode.

BACKUP(VIEW) : Runs the BACKUP function.

SEARCH(PRESET) : Goes to the search screen.

Step Rewind ( Fast Rewind () : Used for quick backward search while in Play.

STOP : Used to stop the playback.

PLAY/PAUSE : Used to pause or resume the screen.

Fast Forward () : Used for quick forward playback. (x2, x4, x8, x16, x32, x64) Step Forward (

Used to change a value or move the cursor up/down/left/right (▲▼◄ ►). Selects a menu item or executes the selected menu.

Runs the TELE function in the PTZ Mode.

Runs the WIDE function in the PTZ Mode.

Runs the Preset View function in the PTZ Mode.

Runs the Preset Setup function in the PTZ Mode.

) : Used for backward frame-by-frame search while in PAUSE.

(-x2,-x4,-x8,-x16,-x32,-x64)

) : Used for forward frame-by-frame search while in PAUSE.

 OVERVIEW

USB Port 1 & 2 Connects the USB devices.

Each button press in the Live Mode switches the screen to 16-, 9-, 4-, 6-, 8-, 13- split screen,

MODE

AUDIO Sets Audio ON/OFF.

ALARM

MENU/RETURN Either goes to the system menu screen or moves to the upper menu from the lower menu.

Channel

Jog shuttle

OPEN/CLOSE Used to open and close the DVR-RW disc tray. (available for SHR-6082/6162/6164 only)

Power

PIP, and auto sequence mode in order. In play mode, each press of the button will switch the screen mode to 13-, 1-, 4-, 9-, and 16split in order. (1 live channel + (N-1) live channel)

Cancels the ALARM LED and the audible alarm when the alarm is going off, and to remove the icon.

Used to select channel numbers directly in the Live Mode, or numbers in the numeric input mode.

When a scroll bar appears in each menu, acts as a scrolling. In Play mode, - Jog : Pauses the playback and steps backward or forward.

- Shuttle : Fast playback forward or backward.

Power LED : Displays the power ON/OFF status. Power Button : Used to turn the DVR ON/OFF.

English _9

overview

PART NAMES AND FUNCTIONS (REAR)

6080/6082

1 2 3 4 5 7 8 9 10 12116

6160/6162/6163/6164

132

4 5 7 8 9 10 12116

10_ overview

Part Names Functions

VIDEO OUT Composite Video Signal Output Port (BNC type connector).

AUDIO OUT Audio Signal Output Port (RCA jack).

VGA VGA Video Signal Output Port.

AUDIO IN Audio input signal port (RCA Jack).

USB USB connector port.

SPOT

NETWORK NETWORK connector port.

RS-485 Used for RS-485 communication. (TX+, TX-, RX+, RX-)

ALARM

LOOP OUT Used to transfer a video signal to other video devices.

VIDEO IN Composite Video Signal Input Port (BNC type connector).

AC 100-240V~ IN

A live screen output port, separate from the VIDEO OUT. Supports Single, 4-, 9-, 16-split, and Auto Sequence modes

- ALARM IN 1~16(SHR-6160/6162/6163/6164): Alarm Input port.

- ALARM IN 1~8(SHR-6080/6082): Alarm Input port.

- ALARM RESET IN: Alarm Reset port.

- ALARM OUT 1–4: Alarm Output port.

AC 100 ~ 230V (PAL) AC 110 ~ 220V (NTSC)

 OVERVIEW

English _11

overview

REMOTE CONTROL

DVR

Available after switching to DVR mode by pressing the [DVR] button on the remote control.

Displays the search menu

Changes the screen mode．

Displays the Exit pop up screen．

Used as the numeric input keys, or displays a single

Skip Backward (by unit time),

Slow Rewind, Slow Forward,

Skip Forward (by unit time)

Goes to the system menu screen.

Up/Down/Left/Right(▲▼◄ ►)/ENTER

Moves the cursor up/down/left/right, and runs the

Freezes the screen temporarily．

Runs the digital zoom (x2) function.

Starts or ends the live recording．

Runs the View function in the PTZ mode．

MODE

POWER

NUMBER [0~+10]

channel．

T/W

Zooms in or out．

Select Menu．

FREEZE

ZOOM

REC

VIEW

．

BACKUP

Displays the Backup Menu.

OPEN/CLOSE

Opens or closes the CD tray.

DVR

Activates the DVR function.

Sets the ID of the system. Select 2 digits from 0 ~ 9 while pressing the ID Key.

Move Frame

While paused, moves to the previous/next frame.

FR, STOP, PLAY/PAUSE, FF

PTZ

Displays or ends PTZ.

SCROLL ,.

Moves the menu scroll.

RETURN

Returns to the previous screen.

AUDIO

Turns Audio on/off.

ALARM

Cancels the Alarm.

REC LOCK

Selects the recording lock function.

PRESET

Displays the Preset Setup.

Using the numeric buttons

CHANNEL 1–9 Press each button between 1 to 9.

CHANNEL 10 Press the [+10] button ﬁ rst, then press the 0 button again within 3 seconds.

CHANNEL 11–16 Press the [+10] button ﬁ rst, then press any number between 1 to 6 within 3 seconds.

12_ overview

MONITOR

Available after switching to Monitor mode by pressing the [MONITOR] button on the remote control.

Selects the screen status automatically．

Selects the screen mode．

Turns the monitor power on/off．

Changes the system ID.

Adjusts the audio volume．

Displays the Setup Menu．

Up/Down/Left/Right(▲▼◄ ►)/ENTER

Moves the cursor up/down/left/right, and runs the

AUTO

P.MODE

POWER

NUMBER [0~9]

+/-

Select Menu.

FREEZE

Screen Freeze．

ID RESET

Initializes the ID value to 01.

MONITOR

Activates the monitor function.

Sets the ID. Select 2 digits from 0 ~ 9 while pressing the ID Key.

MUTE

Mutes the audio out.

 OVERVIEW

SOURCE

Displays the video screen within a screen．

UNDER SCAN

Selects the input signal source.

PIP

Selects or deselects the PIP function.

Using the Numeric buttons

CHANNEL 1–9 Press any button among 1 to 9.

Changing the Remote Control ID

Press the ID button of the remote control and check the ID displayed on the DVR screen.

1. The factory default ID of the remote control is 00.

Enter 2 digits of your selection in order, while pressing the system [ID] button.

2. When ID input is done, press the system [ID] button again to check the setting.

If you want to change the remote control ID to 08: Press 0 and 8 in order while the system [ID] button is pressed.



Remote control's ID and DVR’s ID should be matched for proper operation. Refer to “Remote Devices”. (Page 46)

English _13

installation

Please be noticed with the followings before you use the product.

•

Do not use the product outdoor.

•

Do not spill water or liquid in the connection part of the product.

•

Do not impose the system to excessive shock or force.

•

Do not pull out the power plug forcefully.

•

Do not disassemble the product on your own.

•

Do not exceed the rated input/output range.

•

Use a certiﬁ ed power cord only.

•

For the product with an input ground, use a grounded power plug.

CHECKING THE INSTALLATION ENVIRONMENT

•

Samsung Digital Video Recorder (“DVR” hereinafter) is a state-of-art security device, and contains mass storage hard disk(s) and critical circuits inside.

•

When the temperature rises inside the product, the product may breakdown and the product life be shortened. Please pay attention to the following recommendations before installation.

The followings are the recommendations when Samsung DVR is installed on a rack.

Please ensure that the rack inside is not sealed.

Please ensure the air is circulated through the inlet/outlet as shown in the picture.

If the DVR or other devices on a rack is to be stacked as in the picture, provide a suitable space or install a ventilating opening for air circulation.

For natural air convection, place the inlet at the bottom of the rack and the outlet on top.

It is strongly recommended that a fan motor is installed at the inlet and the outlet for air circulation. (Please ﬁ t a ﬁ lter at the inlet to screen dust or foreign substances.)

Please maintain the temperature inside the rack or surrounding areas between 0°C ~ 40°C (32°F ~ 104°F) as shown in the ﬁ gure 1.

Rack Mount Instructions - The following or similar rack-mount instructions are included with the installation instructions:

A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly,

the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature (Tma) speciﬁ ed by the manufacturer.

B) Reduced Air Flow - Installation of the equipment in a rack should be such that the

amount of air ﬂ ow required for safe operation of the equipment is not compromised.

C) Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition is

not achieved due to uneven mechanical loading.

D) Circuit Overloading - Consideration should be given to the connection of the equipment to the supply circuit

and the effect that overloading of the circuits might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.

E) Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular attention should

be given to supply connections other than direct connections to the branch circuit (e.g. use of power strips).

Temperature Unit: ºC

One Year: 24HR X 365 DAY =8,760 HR

Life (Unit: HOURS)

[Figure 1]

[Figure 2]

14_ installation

RACK INSTALLATION

Loosen the screws on both sides (4 screws on each side) and install the Bracket-Rack as shown in the ﬁ gure, and then fasten the screws on both sides (4 screws on each side).

Fix the screws not to be loosened by vibrations.



HDD ADDITION

You can install additional HDDs. Make sure to unplug the power cord from the wall outlet to prevent possible electric shock, injury or product damage. Please consult your provider for further information on HDD installation since improper installation or settings may damage the product.

Number of HDDs supported : SHR-6082/6162/6164: Default 1 HDD + Up to 4 HDDs added



SHR-6080/6160/6163: Default 1 HDD + Up to 5 HDDs added



Cautions for data loss (HDD care)

Please pay attention so that the data inside the HDD is not damaged. Before adding a HDD, please check the compatibility with this DVR product. HDD is vulnerable to malfunction due to its sensitive nature against externalities or shocks during operation. Please ensure that the HDD is free from such shock or externalities. We are not liable for any damage to the HDD incurred by user’s carelessness or externalities.

Cases might cause damage to HDD or recorded data



To minimize the risk of data loss from a damaged HDD, please backup data as often as possible. Data may be lost due to external impacts during disassembly or installation of the DVR. HDD may be damaged if the DVR is suddenly stopped by a power cut or power off during operation. HDD or ﬁ les stored inside may be damaged if the main body is moved or impacted during the HDD operation.

 INSTALLATION

Cautions when adding a HDD

When adding a HDD, pay attention so that the cable does not get caught between unsuitable spaces or

the cable’s insulation does not come off.

Pay attention so as not to lose the disassembly screws or accessories.

If the screws or accessories are not put together, the product may breakdown or not operate properly.



Please check the HDD compatibility before adding a HDD.

Please contact your nearest dealer to obtain the list of compatible devices.



English _15

installation

Adding a HDD

Make sure to unplug the power cord from the wall outlet before proceeding with the installation.



1) If adding HDDs to SHR-6080, 6160& 6163

Number of HDDs to install : SHR-6082/6162/6164 : Default 1 HDD + Up to 4 HDDs added



SHR-6080/6160/6163 : Default 1 HDD + Up to 5 HDDs added



By factory default, the unit is equipped with one HDD. The following instructions are when you have installed the maximum number of HDDs on the master unit.

First, loosen the screws in the left and right sides and remove the cover.

For SHR-6082/6162/6164 models, see the following page.



Loosen the screws (x4) in the left/right and upper sides and remove the upper and lower brackets.

Cover

Upper Bracket

Install HDDs (x3) on the lower bracket and ﬁ x them

with screws.

The screw (UNC 6-32) to use in the installation comes with



the HDD.

Firmly secure the screw so that it can not get loose from



such as vibration.

Install HDDs (x2) on the upper bracket and ﬁ x them

with screws.

Add

Lower Bracket

Upper Bracket

Lower Bracket

Installed by default

Add

16_ installation

When the installation of additional HDDs is done,

insert the lower and upper brackets into the DVR and ﬁ x them with the provided screws.

When the installation of additional HDDs is done, connect the power cable and connect the HDD signal cables (SATA Cable) to connectors c ~ h on the main board.

You can check the HDD map directly on the DVR.



Refer to “Storage Device > HDD Map”. (Page 44)



Note that the order of the HDD data cable is nothing to do with the operation. Just make arrangements of the connectors considering the length of each connector.

SHR-6080, 6160 & 6163 do not support DVD media.



Upper Bracket

Lower Bracket

 INSTALLATION

2) If adding HDDs to SHR-6082, 6162 & 6164

Loosen the screws (x4) in the left/right and upper

sides to remove the upper bracket and loosen the lower screws (x2) to remove the lower bracket.

Upper Bracket

Lower Bracket

English _17

installation

Install a HDD (x1) on the lower bracket and ﬁ x it with

screws.

Install HDDs (x3) on the upper bracket and ﬁ x them

with screws.

When the installation of additional HDDs is done,

insert the lower and upper brackets into the DVR and ﬁ x them with the provided screws.

Add

Upper Bracket

Add

Lower Bracket

Installed by default

Lower Bracket

When the installation of additional HDDs is done,

connect the power cable and connect the HDD data cables (SATA Cable) to connectors c ~ h on the main board.

Note that the number of a HDD data calbe is nothing to do



with operation of the HDD. Just make arrangements of the connectors considering the length of each connector.

Check if the connectors are properly connected and

there is no problem with wiring, and close the cover and ﬁ x it with screws.

Cover

18_ installation

connecting with other device

The following ﬁ gures are based on Model SHR-6164.



CONNECTING THE VIDEO, AUDIO, AND MONITOR

 CONNECTING WITH OTHER DEVICE

AUDIO IN SPOT

NETWORK

RS-485 / ALARM

AUDIO OUT

VIDEO OUT

(composite)

VIDEO IN

USB 2.0

RS-232CONSOLE

VIDEO OUT (VGA)

CONNECTING THE NETWORK

Connecting to Internet through Ethernet (10/100/1000BaseT)

LOOP OUT

AC 100-240V~IN

Hub/Switcher

Back Bone

RJ-45 Ethernet Cable (Direct Cable)

Hub/Switcher

Windows NET-i Pro

English _19

connecting with other device

Connecting to Internet through ADSL

RJ-45 Ethernet Cable (Direct Cable)

Phone(ADSL) Line

Hub/Switcher

ADSL MODEM

Windows

NET-i Pro

CONNECTING THE USB

There are two USB ports at the front and one at the back of the product.

You can connect a USB HDD, USB CD/DVD player, USB memory or mouse to the USB port.

If a USB HDD is connected to the system, recognition and settings are available in “Menu > Setting the Device >

Storage Device”. (Page 44)

This product supports hot-plugging, which connects/removes the USB device during the system operation.

The USB type HDD must be set as Master.



If you use the USB device for Backup purposes, format it with FAT32 on PC if it is not formatted on the DVR.



CONNECTING POS DEVICE

You can connect a POS device to the RS-232C port on the product’s rear side when you connect it directly with

a RS-232C cable.

Connection setup for the RS-232C port is available in “Menu > Device > POS Devices”, press the

<POS Device Setup> button and set <Baud rate, Parity, Data, Stop bit and Transfer Type>. (Page 46)

20_ connecting with other device

CONNECTING THE ALARM INPUT/OUTPUT

The Alarm In/Out port at the back is composed of the following.

Alarm In/Out Port on 6080/6082

Alarm In/Out Port on 6160/6162/6163/6164

ALARM IN 1 ~ 8 (SHR-6080/6082) : Alarm Input Port

•

ALARM IN 1 ~ 16 (SHR-6160/6162/6163/6164) : Alarm Input Port

•

ALARM RESET : On receiving an Alarm Reset signal, the system cancels the current Alarm Input and resumes

•

sensing. ALARM OUT 1 ~ 4 : Alarm Output Port

•

 CONNECTING WITH OTHER DEVICE

ALARM OUT ALARM IN ALARM IN

English _21

connecting with other device

CONNECTING THE RS-485 DEVICE

Connect the RS-485 device through the back port.

For example, you can connect and control the PTZ



camera which supports the RS-485 communication.

Transfer Type : You may select either Half Duplex or Full

•

Duplex as the data transfer type.

•

Baud Rate : Supported Baud rates are 600/1200/2400/ 4800/9600/19200/38400.

Check if the RS-485 device is compatible with the



product ﬁ rst.

Pay attention not to change the polarity (+/-) of the



RS-485 device when connecting it.

Depending on camera’s type, connection polarity can be



different. For further information, refer to the respective PTZ Camera’s documentation.

Ex : DVR(TX+/-) ↔ SCC-C6433,35(RX+/-)



DVR(TX+/-) ↔ SCC-C6403,07(TX+/-)

PTZ device

Half Duplex Type

Data (–)

Data (+)

Full Duplex Type

Rx(+)

Rx(–)

Tx(–)

Tx(+)

Rear

Tx(–)

Tx(+)

Rx(–)

Rx(+)

22_ connecting with other device

live

GETTING STARTED

Starting the system

Connect the power cable of the DVR to the wall outlet.

Press the Power button on the front panel.

You will see the initialization screen. The initialization process will last about 1 minute in the order of icons appeared. If a new HDD is installed, the initialization process may take a longer time.

The live screen appears with a beep.

 LIVE

Shutting Down the System

You can shut down the system only if you have logged in to the DVR. You should have the <Shutdown> permission to shut down the system if you are not an admin.

Press the [POWER] button on the remote control or the front panel, or right-click to display the context sensitive menu and select <Shutdown>.

The “Shutdown” conﬁ rmation window appears.

Use the arrow keys on the remote control or the front panel to move to <OK> and press the [ENTER] button or click <OK>. The system will shut down.

For the permission management, refer to “Permission



Management > Setting Permissions”. (Page 38)

Shutdown

Are you sure to shutdown?

OK Cancel

English _23

live

To access a DVR or restricted menu, you should have logged in to the DVR.

In live mode, right-click any area of the screen. You will see the context sensitive menu as in the right ﬁ gure.

Click <Login>. The login dialog appears. You can also see the login dialog to access a desired menu by pressing the [MENU] button on the remote control or the front panel.

The login dialog will also appear if you press a menu button on



the remote control or the front panel of the DVR when the corresponding menu requires logging in.

ID admin

Password

OK Cancel

Scene Mode Audio Off Freeze Stop Alarm Record Play Search Backup Main Menu Shutdown Hide Launcher Login





For the restricted permission, refer to “Permission Management > Setting Permissions”. (Page 38)

Locking All Buttons

This will restrict access to all buttons available in the DVR.

In Live mode, press buttons in the order of [STOP] [FREEZE][STOP][FREEZE][MENU]. All buttons will be locked.

In the lock condition, press any button to display a dialog

where you are prompted to enter the password for unlocking the buttons. The button lock will be released if you enter the admin password.



Key Lock Password

ID admin

Password

OK Cancel

24_ live

LIVE SCREEN CONFIGURATION

CAM 01

Icons on the Live Screen

You can check the status or operation of the DVR with the icons on the live screen.

2009-01-01 00:00:01

CAM 01

Name Description

Current Date, Time

Displays the current time and date.

When you are logged in, the “LOG ON” icon will be displayed.

Displayed if the zoom function is activated.

Displayed if you press the Pause button.

Screen Mode

Displayed in Auto Sequence mode where all channels are switched at the speciﬁ c time interval.

Displayed if the recording is in process. M To cancel the recording, enter the password.

Displayed if there is a problem with the cooling fan.

Displayed if the HDD is full and the DVR has an insufﬁ cient space to record.

System Operation

Displayed if no HDD is installed or the existing HDD should be replaced.

Displayed if the HDD needs a technical examination.

Displayed if a new ﬁ rmware is found from the network.

Video Input Status

Displayed if no input is entered in the condition that the camera is set to <ON>.

Nothing will be displayed on the screen if the camera is set to <OFF>.

 LIVE

Camera Name/ Channel

Camera Operation

Displays the camera name and the changed channel, if any.

Displays the resolution of the recording screen. (Page 52)

Displayed in PTZ setting, and highlighted yellow if PTZ is in operation.

Displays AUDIO ON/MUTE. Not displayed in video mode if deactivated.

If the sensor is set to <ON>, the input signal will be displayed on the screen of the connected channel.

Displayed if a motion detected in the condition that the motion detection is set to <ON>.

Displays the current record mode from Record/Event/Schedule.

English _25

live

Error Information

If you turn on the system in the condition that the internal HDD is not connected or an error occurs, the

•

“HDD FAIL” icon ( service center for assistance as this may cause a failure of recording, playback or backup.

If the cooling fan does not work properly or has a problem, the <Fan Information> window will appear and

•

the fan error icon ( operations. As a fan error can shorten the product life, make sure you contact the service center for assistance.

If you see the fan error icon or No HDD, HDD FAIL icons on the screen, contact the service center for more details.



Live Screen Menu

In addition to the buttons on the front panel or the remote control, you can access a desired menu by rightclicking any area in live mode. The context sensitive menu appearing by right-clicking the screen differs, depending on the login/logout, screen split mode and DVD operation mode.

Menu items of Search, Record, Backup, Shutdown and PTZ can be deactivated, depending on the user permission.



) will be displayed on the top left corner. In this case, make sure you contact the

) will be displayed on the top left corner. In this case, check the internal fan for

Scene Mode

Scene Mode Audio Off Freeze Stop Alarm Record Play Search Backup Main Menu Shutdown Hide Launcher Login



PTZ Control ZOOM Audio Freeze Stop Alarm Record Play Search Backup Main Menu Shutdown Hide Launcher Login



PTZ Alarm Freeze

< Split Mode Menu >

< Single Mode Menu >

Split Mode Menu

The context sensitive menu in split mode differs, depending on the login/logout status.

Scene Mode Spot Out Audio Off Freeze Stop Alarm Record Play Search Backup Main Menu Shutdown Hide Launcher Logout



26_ live

Menu Description

Scene Mode Refer to “Live Mode”. (Page 29)

Spot Out Refer to “Spot Out”. (Page 31)

Audio On/Off Refer to “Audio ON/OFF”. (Page 32)

Freeze Refer to “Freeze”. (Page 32)

Stop Alarm

Stops the alarm output and the event monitoring. Refer to “Event Monitoring”. (Page 33)

Record/Stop Starts/stops the standard recording.

Play Plays the search result (data). Refer to “Search & Play > Play”. (Page 69)

Search Refer to “Search & Play > Search”. (Page 66)

Backup Refer to “Using the DVR> Setting the Backup”. (Page 56)

Main Menu Accesses the main menu. Refer to the Using the DVR section. (Page 34)

 LIVE

Shutdown

Show/Hide Launcher

Turns down the DVR.

Shows or hides the launcher. Refer to “View the Launcher Menu”. (Page 28)

Single Mode Menu

The single mode menu is available only in the Single mode. The context sensitive menu of the One Channel mode in Split mode is different from that of the Single mode.

Full Screen Spot Out PTZ Control ZOOM Audio Freeze Stop Alarm Record Play Shutdown Hide Launcher Logout



PTZ Alarm Freeze

Full Screen

PTZ Control

Select and click a desired channel in Split mode to switch to the full screen of the selected channel.

Accesses the PTZ Control menu. The PTZ menu is activated only in One-Channel Live mode. (Page 64)

ZOOM Enlarges the selected image. (Page 32)

English _27

live

View the Launcher Menu

You can use the Launcher menu appearing on the bottom of the live screen to access it.

In Live mode, right-click to display the context menu and select <Show Launcher >.

Move the cursor to the bottom and click a desired item in the Launcher menu.

If no input is entered for 10 seconds, the menu will disappear.



The Launcher menu can be accessed only using the mouse.



SHR-6080/6082 do not support the 16-split screen mode.



PTZ

Alarm Freeze

Menu Description

Date/Time

Screen Mode

Menu Expansion Button Click to display the hidden menu to the right.

Audio Turns ON/OFF the sound of the selected channel.

Zoom Enlarges the selected area. This is available only in Single Live mode.

PTZ Runs the PTZ Control launcher. This is available only in Single Live mode.

Alarm Stops the alarm if it's activated.

Freeze Freezes the Live screen temporarily.

Play Enters Play mode if a ﬁ le to play exist, and if not, enters Search mode.

Record Start/End recording the Live screen.

Displays the current time and date. The indication of AM/PM is displayed if you set 12 hours for the time format in “System>Date/Time/Language>Time”. (Page 34)

Displays in the sequence of 16-, 9-, 4-, 6-, 8-, 13-split, PIP and Auto Sequence. The current mode is highlighted in white.

28_ live

LIVE MODE

SHR-6160/6162/6163/6164 display Live images from 16 channels in a total of 8 layout of split screens.

Switching the screen mode

To switch the split mode, select a screen mode in the launcher menu, or right-click to select a screen mode in the context menu. Press the [MODE] button on the front panel or the remote control to switch the mode in the sequence of the launcher menu items.

SHR-6080/6082 do not support the 16-split screen mode.



 LIVE

CH1 CH2 CH3 CH4

CH5 CH6 CH7 CH8

CH9 CH10 CH11 CH12

CH13 CH14 CH15 CH16

CH2 CH3

CH1

CH4 CH5 CH6

CH7 CH8 CH9

CH1

CH3 CH4

CH2

CH1

CH4 CH5 CH6

CH3

16-split mode 9-split mode 4-split mode 6-split mode

CH3 CH4 CH5

CH2

CH3

CH1

CH5 CH6 CH7 CH8

CH4

8-split mode 13-split mode PIP

CH2

CH6

CH8

CH10 CH11 CH12 CH13

CH1

CH7

CH9

CH1

CH2

CH1

Auto Sequence

Switching the split mode

SHR-6160/6162/6163/6164 display 16 Live images in the sequence of Single, 4-split and 9-split modes.

Auto Sequence

CH1

Single mode



CH1

CH1 CH2

CH3 CH4

CH1 CH2

CH3 CH4

4-split mode

1-4

5-8

13-16

9-12

CH1 CH2 CH3

CH4 CH5 CH6

CH7 CH8 CH9

9-split mode

10-16

1-9

In Single mode, If you have set <SEQ-Dwell Time> in “Setting the Device>Camera”, Auto Sequence will be conducted at the set interval. (Page 42)

In a split mode, If you have set <Multi CH SEQ Time> in “Setting the Device>Monitor”, Auto Sequence will be conducted at the set interval. (Page 47)

English _29

live

Manual Switching

Press the left/right button on the front panel or the remote control, or click the arrow <◄/►> key to move to the next split mode.

•

If pressing the right [ 9-split (CH 1~9) mode  9-split (CH 10~16) mode  Auto Sequence

►

] button in 9-split mode:

CH1 CH2 CH3

CH4 CH5 CH6

CH7 CH8 CH9

•

If pressing the right [



►

] button in 4-split mode:

CH10 CH11 CH12

CH13 CH14 CH15

CH16

CH1 CH2 CH3

CH4 CH5 CH6

CH7 CH8 CH9

10-16

1-9

Channel (CH 1~4)  Channel (CH 5~8)  Channel (CH 9~12)  Channel (CH 13~16)  Auto Sequence

CH1 CH2

CH5 CH6

CH9 CH10

CH13 CH14



CH3 CH4

CH7 CH8

CH11 CH12

CH15 CH16



CH1 CH2

Channel Setting

CH1 CH2

CH3 CH4

1-4

13-16

9-12

5-8

You can display the channel in a desired area of a split screen.

Place the cursor over the camera name of each channel to display the <

Click a camera name to display a channel list where you can select a different channel.

Select a desired channel and click it. The current channel will be switched to the selected one.

Ex : if switching CH 1 to CH 7



CH1 CH2 CH3 CH4

CH5 CH6 CH7 CH8

CH9 CH10 CH11 CH12

CH13 CH14 CH15 CH16



CH7 CH2 CH3 CH4

CH5 CH6 CH1 CH8

CH9 CH10 CH11 CH12

CH13 CH14 CH15 CH16

30_ live

▼

> key to the right on the screen.

+ 75 hidden pages

Samsung SHR-6164PC-GBR, SHR-6164PB-GBR, SHR-6164P5-GBR, SHR-6162P, SHR-6082PA Operating Instructions

overview

FEATURES

IMPORTANT SAFETY INSTRUCTIONS

BEFORE START

CONTENTS

PART NAMES AND FUNCTIONS (FRONT)

PART NAMES AND FUNCTIONS (REAR)

REMOTE CONTROL

installation

CHECKING THE INSTALLATION ENVIRONMENT

RACK INSTALLATION

HDD ADDITION

connecting with other device

CONNECTING THE VIDEO, AUDIO, AND MONITOR

CONNECTING THE NETWORK

CONNECTING THE USB

CONNECTING POS DEVICE

CONNECTING THE ALARM INPUT/OUTPUT

CONNECTING THE RS-485 DEVICE

live

GETTING STARTED

LIVE SCREEN CONFIGURATION

LIVE MODE