Samsung SCX-4100 User Manual
About the User’s Guides
Provides information you need for setting up your machine and installing the supplied software.
It also provides all of the detailed instructions for using your machine as a printer, a scanner
and a copier and information for maintaining and troubleshooting the machine.
Also, provides the basic description about using the multi-function application. Samsung
SmarThru allows you to scan and edit images, and to scan for copying, and sending an e-mail
on your computer.
This manual is provided for information purposes only. All information included herein is
subject to change without notice. Samsung Electronics is not responsible for any changes,
direct or indirect, arising from or related to the use of this manual.
© 2004 Samsung Electronics Co., Ltd. All rights reserved.
• SCX-4100 and Samsung logo are trademarks of Samsung Electronics Co., Ltd.
• PCL and PCL 6 are trademarks of Hewlett-Packard Company.
• Microsoft, Windows, Windows 9x, Window Me, Windows 2000, Windows NT 4.0
and Windows XP are registered trademarks of Microsoft Corporation.
• PostScript 3, Adobe Acrobat Reader, Adobe PhotoDeluxe and Adobe Photoshop are
trademarks of Adobe System, Inc.
• All other brand or product names are trademarks of their respective companies or
organizations.
CONTENTS
Chapter 1:
GETTING STARTED
Unpacking .................................................................... 1.2
Selecting a Location ................................................. 1.3
Understanding the Component Location ........................... 1.4
Front View .............................................................. 1.4
Rear View ............................................................... 1.4
Control Panel Functions ............................................ 1.5
Installing the Toner Cartridge ........................................ 1.6
Loading Paper .............................................................. 1.8
Changing the Paper Size in the Paper Tray .................. 1.9
Making Connections .................................................... 1.11
Turning the Machine On ............................................... 1.13
About Samsung Software ............................................. 1.14
Printer Driver Features ........................................... 1.15
Installing Samsung Software in Windows ....................... 1.16
System Requirements ............................................ 1.16
Installing Samsung Software ................................... 1.17
Installing Samsung SmarThru ................................. 1.20
Repairing Software ...................................................... 1.22
Removing Software ..................................................... 1.23
Uninstalling the MFP Driver ..................................... 1.23
Uninstalling Samsung SmarThru .............................. 1.24
Changing the Display Language .................................... 1.25
Setting the Paper Size and Type ................................... 1.26
Using the Save Modes ................................................. 1.27
Toner Save Mode .................................................. 1.27
Power Save Mode .................................................. 1.27
Chapter 2:
2
PAPER HANDLING
Selecting Print Materials ................................................. 2.2
Type, Input Sources and Capacities ........................... 2.2
Guidelines for Paper and Special Materials .................. 2.3
Selecting an Output Location .......................................... 2.4
Printing to the Front Output Tray (Face down) ............. 2.5
Printing to the Rear Output Slot (Face up) .................. 2.6
Loading Paper in the Paper Tray ...................................... 2.8
Using the Manual Feeder ................................................ 2.9
Setting the Paper Type and Size for the Manual Feeder 2.11
Chapter 3:
PRINTING
Printing a Document in Windows ..................................... 3.2
Canceling a Print Job ................................................ 3.5
Using a Favorite Setting ........................................... 3.6
Using Help .............................................................. 3.6
Setting Paper Properties ................................................ 3.7
Setting Graphic Properties .............................................. 3.8
Printing Multiple Pages on One Sheet of the Paper ........... 3.10
Printing a Reduced or Enlarged Document ...................... 3.12
Fitting Your Document to a Selected Paper Size .............. 3.13
Printing Posters .......................................................... 3.14
Using Watermarks ...................................................... 3.15
Using an Existing Watermark .................................. 3.15
Creating a Watermark ............................................ 3.16
Editing a Watermark .............................................. 3.17
Deleting a Watermark ............................................ 3.17
Using Overlays ........................................................... 3.18
What is an Overlay? ............................................... 3.18
Creating a New Page Overlay .................................. 3.18
Using a Page Overlay ............................................. 3.20
Deleting a Page Overlay ......................................... 3.21
Setting Up the Locally Shared Printer ............................. 3.22
In Windows 9x/Me ................................................. 3.22
In Windows NT 4.0/2000/XP ................................... 3.23
Chapter 4:
COPYING
Loading Paper for Copying ............................................. 4.2
Preparing a Document ................................................... 4.2
Making a Copy .............................................................. 4.3
Setting Copy Options ..................................................... 4.5
Darkness ................................................................ 4.5
Number of Copies .................................................... 4.5
Reduced/Enlarged Copying ....................................... 4.6
Original Type .......................................................... 4.7
Using Special Copy Features ........................................... 4.8
Clone Copying ......................................................... 4.8
Auto Fit Copying ...................................................... 4.9
2 sided in 1 page Copying ....................................... 4.10
2-up Copying ........................................................ 4.11
Poster Copying ...................................................... 4.12
Changing the Default Settings ...................................... 4.13
Setting the Time Out Option ......................................... 4.14
3
Chapter 5:
SCANNING
Scanning Basics ............................................................ 5.2
Scanning Using Samsung SmarThru ................................ 5.2
To use on-line help file ............................................. 5.5
Scanning Process with TWAIN-enabled Software ............... 5.6
Chapter 6:
Chapter 7:
USING YOUR PRINTER IN LINUX
Getting Started ............................................................. 6.2
Installing the MFP Driver ................................................ 6.3
System Requirements .............................................. 6.3
Installing the MFP Driver .......................................... 6.4
Uninstalling the MFP Driver ....................................... 6.6
Using the MFP Configurator ............................................ 6.7
Opening the MFP Configurator ................................... 6.7
Printers Configuration .............................................. 6.8
Scanners Configuration ............................................ 6.9
MFP Ports Configuration ......................................... 6.10
Configuring Printer Properties ....................................... 6.11
Printing a Document .................................................... 6.12
Printing from Applications ....................................... 6.12
Printing Files ......................................................... 6.13
Scanning a Document .................................................. 6.14
Using the Image Editor .......................................... 6.18
MAINTENANCE
Printing the System Data List ......................................... 7.2
Clearing the Memory ..................................................... 7.2
Cleaning Your Machine ................................................... 7.3
Cleaning the Outside ................................................ 7.3
Cleaning the Inside .................................................. 7.3
Cleaning the Document Glass .................................... 7.5
Maintaining the Toner Cartridge ...................................... 7.6
Redistributing Toner ................................................ 7.7
Replacing the Toner Cartridge ................................... 7.8
Cleaning the Drum .................................................. 7.9
Consumables and Replacement Parts ............................... 7.9
Using the Remote Control Panel .................................... 7.10
4
Chapter 8:
TROUBLESHOOTING
Clearing Paper Jams ...................................................... 8.2
In the Paper Tray .................................................... 8.2
In the Paper Exit Area .............................................. 8.3
In the Fuser Area or Around the Toner Cartridge .......... 8.5
In the Manual Feeder ............................................... 8.6
Tips for Avoiding Paper Jams ..................................... 8.6
Clearing LCD Error Messages .......................................... 8.8
Solving Problems .......................................................... 8.9
Paper Feeding Problems ........................................... 8.9
Printing Problems .................................................. 8.10
Printing Quality Problems ....................................... 8.13
Copying Problems .................................................. 8.18
Scanning Problems ................................................ 8.19
Common Linux Problems ........................................ 8.20
Appendix A:
SPECIFICATIONS
General Specifications ................................................... A.2
Scanner and Copier Specifications ................................... A.3
Printer Specifications ..................................................... A.4
Paper Specifications ...................................................... A.5
Overview ................................................................ A.5
Supported Sizes of Paper .......................................... A.6
Guidelines for Using Paper ........................................ A.7
Paper Specifications ................................................. A.8
Paper Output Capacity ............................................. A.8
Paper Storage Environment ...................................... A.9
Envelopes ............................................................. A.10
Labels .................................................................. A.12
Transparencies ...................................................... A.12
5
Important Precautions and Safety Information
When using this machine, these basic safety precautions should always be followed
to reduce risk of fire, electric shock, and injury to people:
1. Read and understand all instructions.
2. Use common sense whenever operating electrical appliances.
3. Follow all warnings and instructions marked on the machine and in the literature
accompanying the machine.
4. If an operating instruction appears to conflict with safety information, heed the
safety information. You may have misunderstood the operating instruction. If you
cannot resolve the conflict, contact your sales or service representative for
assistance.
5. Unplug the machine from the AC wall socket before cleaning. Do not use liquid or
aerosol cleaners. Use only a damp cloth for cleaning.
6. Do not place the machine on an unstable cart, stand or table. It may fall, causing
serious damage.
7. Your machine should never be placed on, near or over a radiator, heater, air
conditioner or ventilation duct.
8. Do not allow anything to rest on the power cable. Do not locate your machine
where the cords will be abused by persons walking on them.
9. Do not overload wall outlets and extension cords. This can diminish performance,
and may result in the risk of fire or electric shock.
10. Do not allow pets to chew on the AC power, or PC interface cords.
11. Never push objects of any kind into the machine through case or cabinet
openings. They may touch dangerous voltage points, creating a risk of fire or
shock. Never spill liquid of any kind onto or into the machine.
12. You machine may have a heavy cover for optimal pressure on the document for
the best scanning. In this case, replace the cover after placing document on the
scan glass, by holding and moving it down slowly until it seats on its location.
13. To reduce the risk of electric shock, do not disassemble the machine. Take it to
a qualified service technician when repair work is required. Opening or removing
covers may expose you to dangerous voltages or other risks. Incorrect
reassembly could cause electric shock when the unit is subsequently used.
6
14. Unplug the machine from the, PC and AC wall outlet, and refer servicing to
qualified service personnel under the following conditions:
• When any part of the power cord, plug, or connecting cable is damaged or
frayed.
• If liquid has been spilled into the machine.
• If the machine has been exposed to rain or water.
• If the machine does not operate properly after instructions have been followed.
• If the machine has been dropped, or the cabinet appears damaged.
• If the machine exhibits a sudden and distinct change in performance.
15. Adjust only those controls covered by the operating instructions. Improper
adjustment of other controls may result in damage, and may require extensive
work by a qualified service technician to restore the machine to normal operation.
16. Avoid using this machine during a lightning storm. There may be a remote risk
of electric shock from lightning. If possible, unplug the AC power cord for the
duration of the lightning storm.
17. If you print large amount of copies, the surface of the output tray may become
hot. Be careful not to touch the surface, and keep children away from the surface.
18. SAVE THESE INSTRUCTIONS.
7
Laser Safety Statement
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR,
chapter 1 Subchapter J for Class I(1) laser products, and elsewhere is certified as a
Class I laser product conforming to the requirements of IEC 825.
Class I laser products are not considered to be hazardous. The laser system and
printer are designed so there is never any human access to laser radiation above a
Class I level during normal operation, user maintenance, or prescribed service
condition.
WARNING
Never operate or service the printer with the protective cover removed from Laser/
Scanner assembly. The reflected beam, although invisible, can damage your eyes.
When using this product, these basic safety precautions should always be followed to
reduce risk of fire, electric shock, and injury to persons:
8
Ozone Safety
Power Saver
During normal operation, this machine produces ozone.
The ozone produced does not present a hazard to the
operator. However, it is advisable that the machine be
operated in a well ventilated area.
If you need additional information about ozone, please
request your nearest Samsung dealer.
This machine contains advanced energy conservation
technology that reduces power consumption when it is not
in active use.
When the machine does not receive data for an extended
period of time, power consumption is automatically
lowered.
The energy star emblem does not represent EPA
endorsement of any machine or service.
Recycling
Please recycle or dispose of the packaging material for this
product in an environmentally responsible manner.
9
Radio Frequency Emissions
FCC Information to the User
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or experienced radio/ TV technician for help.
C
AUTION
responsible for compliance could void the user's authority to operate the equipment.
:
Change or modifications not expressly approved by the manufacturer
Canadian Radio Interference Regulations
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus as set out in the interference-causing equipment standard
entitled “Digital Apparatus”, ICES-003 of the Industry and Science Canada.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux
appareils numériques de Classe B prescrites dans la norme sur le matériel brouilleur:
“Appareils Numériques”, ICES-003 édictée par l’Industrie et Sciences Canada.
10
Declaration of Conformity (European Countries)
Approvals and Certifications
The CE marking applied to this product symbolizes Samsung
Electronics Co., Ltd. Declaration of Conformity with the following
applicable 93/68/EEC Directives of the European Union as of the
dates indicated:
January 1, 1995
member states related to low voltage equipment.
January 1, 1996
laws of the Member States related to electromagnetic compatibility.
March 9, 1999
telecommunications terminal equipment and the mutual recognition of their
conformity.
A full declaration, defining the relevant Directives and referenced standards can be
obtained from your Samsung Electronics Co., Ltd. representative.
: Council Directive 73/23/EEC Approximation of the laws of the
: Council Directive 89/336/EEC (92/31/EEC), approximation of the
: Council Directive 1999/5/EC on radio equipment and
EC Certification
Certification to 1999/5/EC Radio Equipment & Telecommunications
Terminal Equipment Directive (FAX)
This Samsung product has been self-certified by Samsung for pan-European single
terminal connection to the analogue public switched telephone network (PSTN) in
accordance with Directive 1999/5/EC. The product has been designed to work with
the national PSTNs and compatible PBXs of European countries.
In the event of problems, you should contact the Euro QA Lab of Samsung Electronics
Co., Ltd. in the first instance.
The product has been tested against TBR21 and/or TBR38. To assist in the use and
application of terminal equipment which complies with this standard, the European
Telecommunication Standards Institute (ETSI) has issued an advisory document (EG
201 121) which contains notes and additional requirements to ensure network
compatibility of TBR21 terminals. The product has been designed against, and is fully
compliant with, all of the relevant advisory notes contained in this document.
11
Replacing the Fitted Plug (for UK Only)
I
MPORTANT
The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and
has a 13 amp fuse. When you change or examine the fuse, you must re-fit the correct
13 amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover,
do not use the plug until you have another fuse cover.
Please contact the company from where the machine was purchased.
The 13 amp plug is the most widely used type in the UK and should be suitable.
However, some buildings (mainly old ones) do not have normal 13 amp plug sockets.
You need to buy a suitable plug adaptor. Do not remove the moulded plug.
W
ARNING
If you cut off the moulded plug, get rid of it straight away.
You cannot rewire the plug and you may receive an electric shock if you plug
it into a socket.
I
MPORTANT WARNING
The wires in the mains lead have the following color code:
: You must earth this machine.
• Green and Yellow: Earth
• Blue: Neutral
• Brown: Live
If the wires in the mains lead do not match the colors marked in your plug, do the
following:
You must connect the green and yellow wire to the pin marked by the letter “E” or by
the safety `Earth symbol' or colored green and yellow or green.
You must connect the blue wire to the pin which is marked with the letter “N” or
colored black.
You must connect the brown wire to the pin which is marked with the letter “L” or
colored red.
You must have a 13 amp fuse in the plug, adaptor, or at the distribution board.
12
13
Differences Between British and American English
British English American English
Cancelling Canceling
Favourite Favorite
Colour Color
Colours Colors
Coloured Colored
Centre Center
Grey Gray
Greyscale Grayscale
Millimetres Millimeters
Discolour Discolor
Fibre Fiber
Emphasise Emphasize
Recognise Recognize
Organise Organize
Authorise Authorize
Customise Customize
Labelling Labeling
14
1
GETTING STARTED
Thank you for purchasing this multifunctional product.
Your machine provides you with printing, copying, and
scanning functions!
This chapter gives you step-by-step instructions for
setting up your machine.
This chapter includes:
• Unpacking
• Understanding the Component Location
• Installing the Toner Cartridge
• Loading Paper
• Making Connections
• Turning the Machine On
Installing Software
• About Samsung Software
• Installing Samsung Software in Windows
•Repairing Software
• Removing Software
Setting Up the Machine System
• Changing the Display Language
• Setting the Paper Size and Type
• Using the Save Modes
Unpacking
Remove the machine and all accessories from the packing
carton. Make sure that the machine has been packed with the
following items. If there is a missing item, contact the retailer
where you bought the machine:
Starter Toner Cartridge
Quick Install Guide
*
AC Power Cord
CD-ROM
**
***
*The 1,000 pages and 3,000 pages toner cartridges have different
shapes.
** The appearance of the power cord may differ according to your
country’s specifications.
*** The CD-ROM contains the MFP driver, SmarThru software, the
user’s guides and the Adobe Acrobat Reader program. SmarThru
software provides the tools for scanning, copying, printing, and
many other facilities.
N
OTES
:
• The power cord must be plugged into a grounded power socket.
• Components may differ from one country to another.
Remove the packing tape from the front, back and sides of the
machine.
1.2
G
ETTING STARTED
Ta pe
Selecting a Location
Select a level, stable place with adequate space for air
circulation. Allow extra space for opening covers and trays.
The area should be well-ventilated and away from direct sunlight
or sources of heat, cold and humidity. Do not set the machine
close to the edge of your desk or table.
Clearance Space
•
Front
removed)
•
Back
: 482.6 mm
: 100 mm (enough space for ventilation)
(enough space so that the paper trays can be
1
•
Right
: 100 mm
Left
: 100 mm (enough space for ventilation)
•
G
ETTING STARTED
1.3
Jam Cover
Front Output Tray
(Face down)
Front Paper
Output
Extension
Understanding the Component Location
These are the main components of your machine:
Front View
Document Cover
Document Glass
Control Panel
(see the page 1.5)
Front Cover
Manual Feeder
Rear Cover
Guides
Manual
Feeder
Rear View
Power Switch
Paper Tray
AC Power Cord Connector
Toner Cartridge
Rear Output Slot
(Face up)
USB Connector
Parallel Connector
Paper Length Guide
1.4
G
ETTING STARTED
Control Panel Functions
1
1
O
2
3
4
5
Adjusts the brightness of the documents for
C
P
Y
the current copy job.
Selects the number of copies.
Displays the current status and prompts
during an operation.
Scrolls through the options available for the
selected menu item.
Enters Menu mode and scrolls through the
menus available and sends you back to
Standby mode.
Stops an operation at any time.
In Standby mode, clears/cancels the copy
options, such as the darkness and the number
of copies.
Confirms the selection on the display and
starts a job.
G
ETTING STARTED
1.5
Installing the Toner Cartridge
1
Open the front cover.
2
Remove the starter toner cartridge from its bag. Don’t use
a knife or other sharp object as it might scratch the drum of
the cartridge.
1.6
G
ETTING STARTED
3
Gently roll the cartridge 5 or 6 times to distribute the toner
evenly inside the cartridge.
Thoroughly rolling the cartridge will assure the maximum
copies per cartridge.
C
AUTIONS
• To prevent damage, do not expose the toner cartridge to light for
more than a few minutes. Cover it with a piece of paper if left
exposed for more than a few minutes, and keep it flat and clean
place.
• If toner gets on your clothing, wipe it off with a dry cloth and
wash clothing in cold water. Hot water sets toner into the fabric.
:
4
Slide the toner cartridge into the machine until it locks into
place completely.
5
Close the front cover. Make sure that the cover is securely
closed.
1
N
OTE
: When printing text at 5% coverage, you can expect a toner
cartridge life of approximately 3,000 pages. (1,000 pages for the
toner cartridge that is shipped with the printer.)
G
ETTING STARTED
1.7
Loading Paper
You can load approximately 250 sheets.
To load a stack of Letter-sized paper:
1
Pull open the paper tray and remove it from the machine.
2
Fan the edges of the paper stack to separate the pages.
Then tap the stack on a flat surface to even it up.
1.8
G
ETTING STARTED
3
Insert the paper stack into the paper tray with the side you
want to print on
You can load previously printed paper. The printed side
should be facing up with an uncurled edge on top. If you
experience problems with paper feed, turn the paper
around.
facing down
.
4
Pay attention to the paper limit mark on the left inside wall
of the tray. Paper overloading may cause paper jams.
5
Insert and slide the paper tray back into the machine.
1
N
OTE
: After you load the paper, you need to set up your machine
for the paper type and size you loaded. See page 1.26 for copying,
or page 3.7 for PC-printing.
Changing the Paper Size in the Paper Tray
To load longer sizes of paper, such as Legal-sized paper, you
need to adjust the paper guides to extend the paper tray.
1
After pressing and unlatching the guide lock, slide the
paper length guide outward as far as it will go. This extends
the length of the tray.
G
ETTING STARTED
1.9
2
After inserting paper into the tray, slide in the guide until it
lightly touches the end of the paper stack. For paper
smaller than letter, adjust the paper length guide
accordingly.
3
Pinching the paper width guide as shown, move it toward
the stack of paper until it lightly touches the side of the
stack.
N
OTES
:
• Do not push the paper width guide far enough to cause the
materials to warp.
• If you do not adjust the paper width guide, it may cause paper
jams.
1.10
G
ETTING STARTED
Making Connections
To print from your computer, you need to connect your printer
to your computer with either a parallel interface cable or a
Universal Serial Bus (USB) cable.
Using a Parallel Cable (Windows only)
N
OTE
: To connect the printer to the parallel port of the computer
requires a certified parallel cable. You will need to buy a IEEE1284
compliant cable.
1
Make sure that both the printer and the computer are
turned off.
2
Plug the parallel printer cable into the connector on the
back of the printer.
Push the metal clips down to fit inside the notches on the
cable plug.
1
To t h e
parallel
port on
your
computer
3
Connect the other end of the cable to the parallel interface
port on your computer, and tighten the screws.
See your computer User’s Guide if you need help.
Using a USB Cable
N
OTE
: Connecting the printer to the USB port of the computer
requires a certified USB cable. You will need to buy a USB 1.1
compliant cable that is within 3m in length.
1
Make sure that both the printer and the computer are
turned off.
G
ETTING STARTED
1.11
2
Plug the USB printer cable into the connector on the back of
the printer.
To t h e
USB port
on your
computer
3
Connect the other end of the cable to the USB port on your
computer.
See your computer User’s Guide if you need help.
N
OTES
:
• For using a USB cable, you must be running Windows 98/Me/
2000/XP.
• When using the USB connection, your machine provides two USB
modes; Fast and Slow. Fast is the default mode. Some PC users
may experience poor USB function in the default mode. If this
occurs, select the Slow mode to achieve successful results. For
details about changing the USB mode, see page 8.12.
1.12
G
ETTING STARTED
Turning the Machine On
1
Plug one end of the supplied three-pronged electrical type
cord into the AC socket on the machine and the other end
into a properly grounded AC outlet.
2
Press the power switch to turn the machine on. “Warming
Up Please Wait” appears on the display indicating that the
machine is now on.
‹
To the AC outlet
To view your display text in another language, see
page 1.25.
1
C
AUTIONS
• The fusing area inside the rear part of your machine becomes hot
once the machine is turned on. Be careful when you access this
area.
• Do not disassemble the machine when it is turned on as it may
give you an electric shock.
:
G
ETTING STARTED
1.13
Installing Software
About Samsung Software
You must install software using the supplied CD-ROM after you
have set up your machine and connected it to your computer.
The CD-ROM includes:
• Samsung software
• User’s Guides
• Adobe Acrobat Reader
The CD-ROM provides you with the following software:
Windows GDI Driver
To use your machine as a printer and scanner in Windows, you
must install the GDI driver. For information about installing the
GDI driver in Windows, see page 1.16.
Linux Driver
You can print and scan in Linux using your machine. For
information about installing the printer driver in Linux, see
Chapter 6 "Using Your Printer in Linux".
SmarThru Software
SmarThru is the accompanying Windows-based software for
your multifunctional machine. SmarThru contains a powerful
image editor that allows you to edit images in many ways and
also includes powerful Internet mail client software. With
SmarThru, you can save the scanned images in a dedicated
storage area for subsequent editing, sending via e-mail, printing
and processing by other programs of your choice.
Remote Control Panel
This Window-based program is automatically installed when you
install the GDI driver. For information about using the program,
see page 7.10.
1.14
G
ETTING STARTED
Printer Driver Features
Your printer drivers support the following standard features:
• Paper source selection
• Paper size, orientation and media type
• number of copies
The following table lists a general overview of features
supported by your printer drivers.
Printer Driver
Feature
Win9x/Me Win2000/XP WinNT4.0 Linux
Ton er S av e Y Y Y Y
Print quality option Y Y Y Y
Poster printing Y Y Y N
Multiple pages per sheet (N-up) Y Y Y Y(2,4)
Fit to page printing Y Y Y Y
Scale printing Y Y Y Y
Watermark Y Y Y N
Overlay Y Y Y N
1
G
ETTING STARTED
1.15
Loading...