Samsung SC-HMX10 - 8GB Flash Memory High Definition Camcorder, SC-HMX10, SC-HMX10A, SC-HMX10C User Manual
the possibilities
..... _j .......
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/global/regist er
The HD camcorder is capable of recording and playing back both High Definition (HD: 1280x720p) and Standard
Definition (SD: 720x480p) image quality, Select the recording image quality, HD (high definition) or SD (standard definition),
before recording,
ENJOYING IMAGES WITH HIGH DEFINITION (HD) QUALITY
You can view record video with HD (high definition) image quality.
,, This HD camcorder offers 720p resolution with a sharper image than previous SD camcorders (480i).
It also supports widescreen recording with an aspect ratio of 16:9.
,, Recordings made in HD (high definition) image quality will fit widescreen (16:9) HDTVs.
Ifyour TV is not a high definition T_, movies with HD (high definition) image quality will be displayed with SD
(standard definition) image quality.
To enjoy HD quality images, you need a TV supporting 1280x720p input.
(Refer to the user manual of your T_)
To enjoy the HD quality images, use an HDMI or Component cable.
The multi AV cable does not support HD quality images so it down converts them to SD quality images.
,, The image is recorded in 720x480p when the quality is set to SD in the HD camcorder.
Videos recorded at SD (standard definition) image quality cannot be converted to HD (high definition).
72O
<720p/16:9 high definmon camcoraer>
image resolution: about 5 times that of orevious SD camcorders '480i
72O
48O
<4_:)_/ normaldJ__a_camooraer>
ii Engii:sh
FEATURES OF YOUR NEW HD CAMCORDER
1.61 Mega pixel (Gross) CMOS sensor
1/4.5" CMOS sensor provides stunning detail and clarity with exceptional video (1280 lines of resolution HD mode
or 720 lines of horizontal resolution SD mode) and still image performance (3.0 mega pixels). Unlike traditional CCD
imagers, CMOS sensors require less power, providing better battery performance.
High-capacity embedded flash memory (SC-HMXl 0A/HMXl 0C only)
The HD camcorder has built-in high capacity flash memory that allows you to record movie or photo images.
H.264 (MPEG4 partl0/AVC) encoding
The latest video compression technology, H.264 uses a high compression rate to sharply increase the recordable
time for the same size storage.
HDMI interface (Anynet+ supported)
,, Ifyou have an HDTV with an HDMI jack, you can enjoy a clearer and
sharper image when compared to a standard definition TV
,, This HD camcorder supports Anynet+.
Anynet+ is an AV network system that enables you to control all connected
Samsung AV devices with an Anynet+ supported Samsung TV remote
control. Refer to the corresponding TV's user manual for more details.
2.7" wide (16:9) touch panel LCD screen (230K pixels)
The 2.7" wide (16:9) LCD screen provides excellent viewing clarity with improved
resolution. The 230K pixel LCD screen rotates up to 270 degrees for multiple viewing
angles providing sharp, detailed images for monitoring or playback, and the widescreen
format makes shooting in 16:9 mode and composing shots even easier.
Touch panel adopted
You can play recorded images and set functions by simply tapping on the LCD screen.
Swivel handle for free style shooting
You can adjust the swivel handle's angle up to 150° to suit the recording situation.
English iii
J
What the icons and signs in this user manual mean;
Z_ Means that death or serious personal injury is a risk.
WANNING
Z_ Means that there is a potential risk for personal injury or material damage.
CAUTION
To reduce the risk of fire, explosion, electric shock, or personal injury when using your HD
CAUTION camcorder, follow these basic safety precautions:
[] Means hints or referential pages that may be helpful when operating the HD camcorder.
These warning signs are here to prevent injury to you and others.
Please follow them explicitly. After reading this section, keep it in a safe place for future reference.
rnr or snt ssf tv nstnA<;tons
I J
OAUTION:TOREDUCETHE RISKOF ELECTRICSHOCK,
DONOT REMOVEOOVERDR RACK)
NO USER SERVICEABLEPARTSINSIDE
REFERSERVICINGTO QUALIFIEDSERVICEPERSONNEL
/
This symbol indicates that dangerous voltage consisting a riskof |
electric shock is present withinthis unit.
J
This symbol indicates that there are important operating and /
maintenance instructions in the literature accompanying this unit.
J
Warning
To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or Moisture."
Caution
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains
plug shall be readily operable.
iv English
rnoor nt n tr Aot
I J
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not usethis apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and athird grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachmentJaccessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the carVapparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in anyway, such as power_supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
15. Apparatus shall not be exposed to dripping or
splashing and no objects filledwith liquids, such as
vases, shall be placed on the apparatus.
16. VENTILATION:
Slots and openings inthe cabinet are provided
for ventilation to ensure reliable operation of the
CAMCORDER and to protect itfrom overheating.
These openings must not be blocked orcovered.
Never place your CAMCORDER on a bed, sofa, rug,
or other similar surface: on or near a radiator or heat
register. This CAMCORDER should not be placed in a
built-in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer's
instructions have been adhered to.
English v
rnoor nt
I J
17, POWER SOURCES:
The CAMCORDER should be operated only from the
type of power source indicated on the label. Ifyou are
not sure of the type of power supply at your home,
consult your appliance dealer or local power company.
A CAMCORDER is intended to be operated from
battery power, or other sources, refer to the operating
instructions.
18. GROUNDING OR POLARIZATION:
This CAMCORDER may be equipped with either a
polarized 2-wire AC line plug (a plug having one blade
wider than the other) or a 3-wire grounding type plug,
a plug having a third (grounding) pin. If you are unable
to insert the plug fully into the outlet, try reversing the
plug. If the plug still fails to fit, contact your electrician
to replace your outlet. Do not defeat the safety purpose
of the polarized plug.
19. POWER-CORD PROTECTION:
Power-supply cords should be routed so that they are
not likelyto be walked on or pinched by items placed
upon or against them, paying particular attention to
cords or plugs, convenient receptacles, and the point
where they exit from the unit.
20. OUTDOOR ANTENNA GROUNDING:
CAMCORDER, be sure the antenna or cable systerq is
grounded to provide some protection against voltage
surges and built-up static charges, Section 810 of the
National Electrical Code, ANSI/NFPA No.
s fotv nstr Aotons
70-1984, provides information with respect to proper
grounding of the mast and supporting structure,
grounding of the lead-in wire and supporting structure,
grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge
unit, size of grounding to conductors, location of
antenna-discharge unit, connection to grounding
electrodes and requirements for the grounding
electrode.
See figure below.
21. LIGHTNING:
For added protection of this CAMCORDER during a
lightning storm orwhen it is left unattended and unused
for long periods of time, unplug it from the wall outlet
and disconnect the antenna or cable system. This will
prevent damage to the CAMCORDER due to lightning
and powerline surges.
vi English
22.POWERLINES:
Anoutsideantennasystemshouldnotbelocatedin
thevicinityofoverheadpowerlinesorotherelectric
lightorpowercircuitswhereitcanfallintosuchpower
linesorcircuits.Wheninstallinganoutsideantenna
system,extremecareshouldbetakentokeepfrom
touchingsuchpowerlinesorcircuitsascontactwith
themmightbefatal.
23.OVERLOADING:
Donotoverloadwalloutletsandextensioncordsas
thiscanresultinariskoffireorelectricshock.
24.OBJECTSANDLIQUIDS:
NeverpushobjectsofanykindintothisCAMCORDER
throughopeningsastheymaytouchdangerous
voltagepointsorshortoutapartthatcouldresultina
fireorelectricshock.Neverspillliquidsofanykindonto
theCAMCORDER.Shouldspillageoccur,unplugunit
andhaveitcheckedbyatechnicianbeforeuse.
25.SERVICING:
DonotattempttoservicethisCAMCORDERyourself.
Openingorremovingcoversmayexposeyouto
dangerousvoltageorotherhazards.Referallsewicing
toqualifiedsewicepersonnel.
26.DAMAGEREQUIRINGSERVICE:
UnplugthisCAMCORDERfromthewalloutletand
referservicingtoqualifiedsewicepersonnelunderthe
followingconditions:
a. Whenthepower-supplycordorplugisdamaged.
b. Ifanyliquidhasbeenspilledonto,orobjectshave
fallenintotheCAMCORDER.
c. IftheCAMCORDERhasbeenexposedtorainor
water.
d. IftheCAMCORDERdoesnotoperatenormally
byfollowingtheoperatinginstructions,adjustonly
thosecontrolsthatarecoveredbytheoperating
instructions.Improperadjustmentofothercontrols
mayresultindamageandwilloftenrequire
extensiveworkbyaqualifiedtechniciantorestore
theCAMCORDERtoitsnormaloperation.
e. IftheCAMCORDERhasbeendroppedorthe
cabinethasbeendamaged.
f. WhentheCAMCORDERexhibitsadistinctchange
inperformance,thisindicatesaneedforsewice.
27.REPLACEMENTPARTS:
Whenreplacementpartsarerequired,besurethe
servicetechnicianhasusedreplacementparts
specifiedbythemanutacturerandhavingthesame
characteristicsastheoriginalpart.Unauthorized
substitutionsmayresultinfire,electricshockorother
hazards.
28.SAFETYCHECK:
Uponcompletionofanyserviceorrepairstothis
CAMCORDER,asktheservicetechniciantoperform
safetycheckstodeterminethattheCAMCORDERisin
saleoperatingorder.
Englishvii
rn or ant safety nstruot ons
I J
29. To prevent damage which may result in fire or shock
hazard, do not expose this appliance to rain or
moisture.
30. If this power supply is used at 240V ac, a suitable plug
adaptor should be used.
31. This product is covered by one or more of the follovqng
U.S. patents:
5,060,220 5,457,669 5,561,649 5,705,762 5,987,417
6,043,912 6,222,983 6,272,096 6,377,524 6,377,531
6,385,587 6,389,570 6,408,408 6,466,532 6,473,736
6,477,501 6,480,829 6,556,520 6,556,521 6,556,522
6,578,163 6,594,208 6,631,110 6,658,588 6,674,697
6,674,957 6,687,455 6,697,307 6,707,985 6,721,243
6,721,493 6,728,474 6,741,535 6,744,713 6,744,972
6,765,853 6,765,853 6,771,890 6,771,891 6,775,465
6,778,755 6,788,629 6,788,630 6,795,637 6,810,201
6,862,256 6,868,054 6,894,963 6,937,552
USER INSTALLER CAUTION:
Your authority to operate this FCC certified equipment could be
voided if you make changes or modifications not expressly approved
by this party responsible for compliance to part 15 FCC rules.
NOTE:
(_) LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND
MUST BE RECYCLED QR DISPOSED OF ACCORDING
TO LOCAL, STATE QR FEDERAL LAWS. For details see
lamprecycb.org, eiae.org, or call 1 800 Samsung (7267864)
l CALIFORNIA USA ONLY
This Perchlorate warning applies only to primary CR
(Manganese Dioxide) Lithium coin cells in the product sold
or distributed ONLY in California USA
" Percblorate Material - special handling may apply,
See www.dtsc.ca.gov/hazardouswaste/perehlorat e."
viii Enqlbh
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following rneasures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help and for additional suggestions.
The user may find the following booklet prepared by the
Federal Communications Commission helpful: "How to
Identify and Resolve Radio-TV Interference Problems."
This Booklet is available from the U.S. Government
Printing Office, Washington, D.C. 20402, Stock No.
004@00@0345-4.
'CO Warning
The user is cautioned that changes or modifications not
expressly approved by the manufacturer could void the user's
authority to operate the equipment.
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions;
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
or o Ation,s
I
i Caution
i
If this power supply is used at 240V ac, a suitable plug adapter should be used.
trn or nt nforrn ton on
I
BEFORE USING THIS CAMCORDER
o
o
o
o
This HD camcorder records video in H.264 (MPEG4 part10/AVC) format and at High (HD-VIDEO) and
Standard Resolution (SD-VIDEO),
Please note that this HD camcorder is not compatible with other digital video formats.
Before recording important video, make a trial recording.
Play back your trial recording to make sure the video and audio have been recorded properly.
The recorded contents cannot be compensated for:
Samsung cannot compensate for any damage caused when a recording cannot be played back because of a
defect in the HD camcorder or memory card.
Samsung cannot be responsible for your recorded video and audio.
Recorded contents may be lost due to a mistake when handling this HD camcorder or memory card, etc.
Samsung shall not be responsible for compensation for damages due to the loss of recorded contents.
English ix
rn or nt nforrn t on on
I
o
o
Make a backup of important recorded data
Protect your important recorded data by copying the files to a PC. We also recommend you copy it from your PC
to other recording media for storage. Refer to the software installation and USB connection guide.
Copyright: Please note that this HD camcorder is intended for individual use only.
Data recorded on the storage media in this HD camcorder using other digital/analog media or devices is protected
by the copyright act and cannot be used without permission of the owner of copyright, except for personal
enjoyment. Even if you record an event such as a show, performance or exhibition for personal enjoyment, it is
strongly recommended that you obtain permission beforehand.
ABOUT THIS USER MANUAL
,, This User Manual covers models SC-HMX10, SC-HMX10A and SC-HMXl0C.
The SC HMX10A and SC HMX10C have a 4GB and 8 GB built-in flash memory respectively but also use memory
cards. The SC-HMX10 does not have built-in flash memory and uses memory cards exclusively.
Although some features of SC HMX10, SC HMX10A and SC HMX10C are different, they operate in the same
way.
,, Illustrations of model SC HMX10A are used in this user manual.
,, The displays in this user manual may not be exactly the same as those you see on the LCD screen.
,, Designs and specifications of the camcorder and other accessories are subject to change without any notice.
NOTES REGARDING TRADEMARKS
,, All the trade names and registered trademarks mentioned in this manual or other documentation provided with
your Samsung product are trademarks or registered trademarks of their respective holders.
,, Windows® is registered trademark or trademark of Microsoft Corporation, registered in the United States and
other countries.
,, Macintosh is trademark of Apple Computer, Inc.
,, All the other product names mentioned here in may be the trademark or registered trademarks of their respect
companies.
,, Furthermore, "TM" and "R" are not mentioned in each case inthis manual.
x English
IMPORTANT NOTE
o
o
o
o
o
o
Handle the liquid crystal display (LCD) with care:
The LCD is a very delicate display device: Do not press its surface with force, hit it or prick itwith a sharp
object.
If you push the LCD surface, unevenness in display may occur. If unevenness does not disappear, turn the
camcorder off, wait for a few moments, and then turn it on again.
Do not place the camcorder with the open LCD screen down.
Close the LCD screen when not using the camcorder.
Liquid crystal display :
The LCD screen of this product uses high precision technology. Among the total number of pixels (approx.
230,000 pixels for LCD screen), 0.01% or less pixels may be missing (black dots) or may remain lit as colored
dots (red, blue, green). This shows the limitations of the current technology, and does not indicate a fault that
will interfere with recording.
The LCD screen will be slightly dimmer than usual when the camcorder is at low temperature, as in cold areas,
or immediately after power is turned on. Normal brightness will be restored when the temperature inside the
camcorder rises. This has no effect on the images in the storage media, so there is no cause for concern.
Hold the HD camcorder correctly:
Do not hold the HD camcorder by the LCD screen when lifting it: the LCD screen could detach and the HD
camcorder may fall.
Do not subject the HD camcorder to impact:
This HD camcorder is a precision machine. Takegreat care that you do not strike itagainst a hard object or let it fall.
Do not use the HD camcorder on a tripod (not supplied) in a place where it is subject to severe vibration or
impact.
No sand or dust!
Fine sand or dust entering the HD camcorder or AC power adaptor could cause malfunctions or defects.
No water or oil!
Water or oil entering the HD camcorder or AC power adaptor could cause electric shock, malfunctions or defects.
Heat on surface of product:
The surface of the HD camcorder will be slightly warm when in use, but this does not indicate a fault.
English xi
o Becarefulofambienttemperature:
UsingtheHDcamcorderinaplacewherethetemperatureisover140°F(60°C)orunder32°F(0°C)willresult
inabnormalrecording/playback.
DonotleavetheHDcamcorderonabeachorinaclosedvehiclewherethetemperatureisveryhighforalong
time:Thiscouldcauseamalfunction.
o Donotpointdirectlyatthesun:
Ifdirectsunlightstrikesthelens,theHDcamcordercouldmalfunctionorafirecouldoccur.
DonotleavetheHDcamcorderwiththeLCDscreenexposedtodirectsunlight:Thiscouldcausea
malfunction.
o DonotusetheHDcamcordernearTVorradio:
ThiscouldcausenoisetoappearontheTVscreenoronradiobroadcasts.
o DonotusetheHDcamcordernearstrongradiowavesormagnetism:
IftheHDcamcorderisusednearstrongradiowavesormagnetism,suchasneararadiotransmitterorelectric
appliances,noisecouldentervideoandaudiothatarebeingrecorded.Duringplaybackofnormallyrecorded
videoandaudio,noisemayalsobepresentinpictureandsound.
o DonotexposetheHDcamcordertosootorsteam:
ThicksootorsteamcoulddamagetheHDcamcordercaseorcauseamalfunction.
o DonotusetheHDcamcordernearcorrosivegas:
IftheHDcamcorderisusedinaplacewherethereisdenseexhaustgasgeneratedbygasolineordieselengines,
orcorrosivegassuchashydrogensulfide,theexternalorinternalterminalscouldcorrode,disablingnormal
operation,orthebatteryconnectingterminalscouldcorrode,sothatpowerwillnotturnon.
,, DonotwipetheHDcamcorderbodywithbenzeneorthinner:
Theexteriorcoatingcouldpeelofforthecasesurfacecoulddeteriorate.
,, Keepthememorycardoutofreachofchildrentopreventswallowing.
xii English
INTRODUCTION TO BASIC 05
FEATURES
GETTING TO KNOW YOUR HD
CAMCORDER
06 What's included with your HD camcorder
07 Front & left view
08 Right &top view
09 Rear & bottom view
PREPARATION
BEFORE RECORDING
10 Using the remote control
11 Installing the button type battery
11 Using the cradle
12 Holding the HD camcorder
13 Charging the battery pack
17 Basic HD camcorder operation
18 Screen indicators
22 Using the display (Ir='Im)/iCHECKbutton
22 Using the LCD enhancer (_)
23 Using the LCD screen
24 Initial setting: OSD language & date and time
26 Selecting the storage media (SC HMX10A/HMX10C only)
27 Inserting/ejecting a memory card
28 Recordable time and number of images
29 Selecting a suitable memory card
English 01
oont nt,s
RECORDING
i
31 Recording movie images
33 Taking photo images
34 Recording with ease for beginners (EASY Q mode)
35 Capturing still images during movie images playback
36 Using the external microphone
36 Zooming
37 Self record using the remote control
PLAYBACK 38 Changing the playback mode
39 Playing movie images
41 Viewing photo images
CONNECTION
USING THE MENU iTEMS
i
43 Connecting to a TV
46 Dubbing images on a VCR or DVD/HDD recorder
47 Handling menus and quick menus
49 Menu items
51 Quick menu items
52 Recording menu items
64 Playback menu items
66 Setting menu items
02 English
EDiTiNG MOVIE iMAGES
/
72 Deleting a section of a movie image
73 Dividing a movie image
75 Combining two movie images
76 Playlist
iMAGE MANAGEMENT 79 Protection from accidental erasure
80 Deleting images
" 81 Copying images (SC-HMX10A/HMX10C only)
82 Moving images (SC HMXIOA/HMXIOC only)
PRINTING PHOTO iMAGES 83 DPOFprintsetting
84 Directprintingwith a PictBridge printer
CONNECTING TO A PC 86 System requirements
87 Installing the Cyberlink DVD Suite
89 Connecting the USB cable
90 Viewing the contents of storage media
92 Transferring files from the HD camcorder to your PC
English 03
MAINTENANCE & ADDITIONAL 93 Maintenance
iNFORMATiON 94 Additional information
96 Using your HD camcorder abroad
TROUBLESHOOTING 97 Troubleshooting
SPECI FICATIONS 110
WARRANTY 111
04 English
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!ii iiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii¸ Preparation _ _ .............................
• Chargingthe battery pack '-*page lo
,, Settingthedate/timeand OSD language '-*pages 24 25 .................../_l_l_
• Setting the storage media (built in memory or memory card) _page 26
(SO HMX10A/HMX10C only)
Record,og . .....
Recordng moveorpToto mages pages31 33 ..........
Playingback
Selectinganimagetoplaybackfromthethumbnailindexviews _ f___j,_m_ ::::::::::::::::::
_',)ages 09, 41 I I
. ViewingplaybackfromyourHDcamcorderonyourPCor-rV ..........
pages 43, 89
WHAT'S INCLUDED WITH YOUR HD CAMCORDER
Your new HD camcorder comes with the following accessories. If any of these items is missing from your box, call
Samsung's Customer Care Center.
O The exact appearance of each item may vary by model,
iiiiiiiiiiiiiiiiiiiiiiiiiiiii
:!I¸ !I
, The contents may vary depending on the sales region.
Parts and accessories are available at your local Samsung dealer.
* : Not included with your camcorder. To buy this optional accessory, contact your nearest Samsung dealer.
, A memory card is not included. See page 29 for memory cards compatible with your HD camcorder.
06 English
FRONT & LEFT VIEW
(_} Recording indicator
{_ LED Light
{_ Remote sensor
@ Lens
Internal microphone
_} Built in speaker
Display (Ir-ll) //CHECK button
_} LCD enhancer ( [:._'_) button
8_} USB jack
(_ COMPONENT / AV / S Video (O) jack
RESET button
_} HDMI jack
Jack cover
TFT LCD screen (Touch panel)
(_} Recording start/stop button
1_}Zoom (W/T) button
Q.MENU button
Engl}sh 07
RIGHT & TOP VIEW
%
PHOTO button
Zoom (W/T) lever
Battery pack slot
@ BATT. RELEASE switch
Memory card slot
[6} Battery pack / Memory card cover
_1 Grip belt hook
_} Grip belt
_2} Swivel handle
Lens open / close switch
08 English
REAR & BOTTOM VIEW
®
/
(i] MODE button / Mode indicator
(Movie (_) / Photo (_) / Play (0) mode)
(_] EASY Q button
DC IN jack
@ Recording start/stop button
(]_] POWER switch
External microphone (MIC) jack
(_ Charging (CHG)indicator
_] Tripod receptacle
(2] Cradle receptacle
English 09
reK)ar t on
I I
This section provides inforrnation on using this HD carnoorder; such as how to use the provided accessories, how to
charge the battery, how to setup the operation mode and initial setup,
USING THE REMOTE CONTROL
%
%
%
JJ_START/STOP button
{_] DISPLAY button
(_ Skip (_/_) button
@ Stop (Q) button
[_ MENU button
[_ Control (Q/G/G/G/{)) buttons
{Z] PHOTO button
Zoom (W/T) button
{_} SELF TIMER button
1_) Search ((_/_) button
Slow playback (Q) button
Play/Pause (Q) button
I_} Q MENU button
The buttons on the remote control function the
same as those on the HD camcorder.
10 English
INSTALLING THE BUTTON TYPE BATTERY
Installing the button type battery in the remote control
1, Turn the battery holder counterclockwise (as indicated with (®) mark) using your
fingernail or a coin to open it. The battery holder opens.
2, Insert the battery into the battery holder with the positive (+) terminal facing down and
press itfirmly until you hear a locking sound.
3, Place the battery holder back in the remote control, match its (®) mark with the (O)
mark on the remote control, and turn the battery holder clockwise to lock it.
Precautions regarding the button type battery
,, There is a danger of explosion if button type battery is incorrectly replaced. Replace
only with the same or equivalent type.
,, Do not pick up the batten/using tweezers or other metal tools. This will cause a short
circuit.
,, Do not recharge, disassemble, heat or immerse the battery in water, to avoid the risk
of explosion.
Z_ Keep the button type battery out of the reach of the children.
WAR,,.QShould any battery be swallowed, consult a doctor immediately.
USING THE CRADLE
The cradle is a connection plate which can be used to make the
camcorder more stable when charging the battery, or connecting to
an external device _ PC, etc.).
o
Ifyou connect your HD camcorder to the provided cradle
using more than one type of cable to output image, the order
of priority of the output signal is as follows:
USB cable -, Component/Multi AV cable.
Do not connect the connection cables at the same time, it
Cradle
F receptacle
DC IN ja¢k
;: ponoo ou,,,_Av
may cause conflict and may not work properly. If this occurs, '°_
remove all the connected cables and try the connection
again.
English 11
reK) r t on
I I
HOLDING THE HD CAMCORDER
Attaching the grip belt
Insert your right hand from the bottom of the HD camcorder up to the base of your thumb.
Put your hand in a position where you can easily operate the Recording start/stop button, PHOTO button, and the
Zoom lever.
Adjust the length of grip belt so that the HD camcorder is stable when you press the Recording start/stop button
with your thumb.
1. Detach the belt.
2. Adjust the length of the grip belt and attach it.
Angle Adjustment
Rotatethe swivelhandleat the most convenientangle.
Youcan rotateit downwardfrom 10° to 150°.
Please be careful not to turn the swivel handle backward as
it may cause damage.
12 English
CHARGING THE BATTERY PACK
Use the IA-BP85ST battery pack only.
• The battery pack may be charged a little at the time of purchase.
,, Be sure to charge the battery pack before you start using your HD camcorder.
Inserting the battery pack
1. Slide and open the battery pack cover as shown in the figure.
2. Insert the battery pack into the battery pack slot until itsoftly
clicks.
,, Make sure that word mark (SAMSUNG) is facing down while
the camcorder is placed as shown in the figure.
3. Slide and close the battery pack cover.
Charging the battery pack
1. Slide the POWER switch downward to turn off the power.
2. Open the DC IN jack cover and connect the AC power adaptor to
the DC IN jack.
3. Connect the AC power adaptor to a wall socket.
4. Once charged, disconnect the AC power adaptor from the DC IN
jack on your HD camcorder.
,, Even with the power switched off, the battery pack will still
discharge if it is left inserted in the HD camcorder.
* You can also charge with the cradle. "%)age 11
o It is recommended you purchase one or more additional battery packs to allow continuous use of your HD
camcorden
Use only Samsung-approved battery packs. Do not use batteries from other manufacturers.
Otherwise, there is a danger of overheating, fire or explosion.
Samsung is not responsible for problems occurring due to using unapproved batteries.
English 13
reK)ar t on
I I
Charging indicator
The color of the CHG lamp indicates the power or charging state.
,, Ifthe battery pack has been fully charged, the charge indicator is
green.
,, Ifyou are charging the batten/, the color of the charge indicator is
orange.
,, If an error occurs while the battery pack in charging, the charging
indicator blinks green.
ii
<Charging indicator>
Charging recording and playback times with a fully charged battery pack
(w th no zoom operat on, LCD open, etc.)
Recording format
SD
Continuous recording time
approx. 80 rain
approx. 85 min
Playback time
approx. 100 min
approx. 110 min
o
o
o
Measured times shown above are based on model SC HMX10A.
(Times for SC HMX10/HMX10C are almost the same)
The time is only for reference. Figures showed above are measured under Samsung's test environment, and may
differ from your actual use.
The recording time shortens dramatically in a cold environment. The continuous recording times in the operating
instructions are measured using a fully charged battery pack at 77 °F (25 °C). As the environmental temperature
and conditions vary, the remaining battery time may differ from the approximate continuous recording times given
in the instructions.
14 English
Continuousrecording(withoutzoom)
ThetimesshowninthetablereflecttheavailablerecordingtimewhentheHDcamcorderisintherecordingmode
withoutusinganyotherfunctions.Inactualrecording,thebatterypackmaydischarge2-3timesfasterthanthis
referencesincetheRecordstart/stopandZoomarebeingoperated,andplaybackisperformed.Assumethatthe
recordabletimewithafullychargedbatterypackisbetween1/2and1/3ofthetimeinthetable,andenoughbattery
packstoallowforthetimeyouareplanningtorecordontheHDcamcorder.
Notethatthebatterypackdischargesfasterincoldenvironment.
,, Thechargingtimewillvarydependingontheremainingbatterylevel.
,, Tochecktheremainingbatterycharge,pressandholdtheDisplay(Inl)/iCHECKbutton."-,page22
Ejectingthebatterypack
1.Slideandopenthebatterypackcover.
2.SlidetheBATT.RELEASEswitchandpulloutthebatterypack.
,, GentlyslidetheBATT.RELEASEswitchinthedirectionas
showninthefigure.
3.Slideandclosethebatterypackcover.
,, AdditionalbatterypacksareavailableatyourlocalSamsung
dealer.
,, IftheHDcamcorderwillnotbeinuseforawhile,removethe
batterypackfromtheHDcamcorder.
Aboutbatterypacks
,, Thebatterypackshouldberechargedinanenvironmentthatisbetween32°F(0°C)and104°F(40°C).However,
whenitisexposedtocoldtemperatures(below32°F(0°C)),itsusagetimebecomesreducedanditmaycease
tofunction,ifthishappens,placethebatterypackinyourpocketorotherwarm,protectedplaceforashorttime,
thenreinsertittotheHDcamcorder.
,, Donotputthebatterypacknearanyheatsource(i.e.fireoraheater).
,, Donotdisassemble,applypressureto,orheatthebatterypack.
,, Donotallowbatterypackterminalstobeshortcircuited.Itmaycauseleakage,heatgeneration,induce
overheatingorfire.
Eng%h15
reK) r t on
I I
Maintaining the battery pack
,, The recording time is affected by temperature and environmental conditions.
,, We recommend only using the original battery pack that is available from your Samsung retailer. When the battery
reaches the end of its life, please contact your local dealer.
The batteries have to be dear with as chemical waste.
,, Make sure that the battery pack isfully charged before starting to record.
,, To preserve battery power, keep your HD camcorder turned off when you are not operating it.
,, Even when the power is switched off, the battery pack will still discharge if it is left inserted on the HD camcorder.
Ifyou do not use the HD camcorder for an extended time period, keep it with the battery completely depleted.
,, For power saving purposes, the HD camcorder will automatically turn off after 5 minutes in standby mode. (Only if
you set "Auto Power Off" from the menu to on (" 5 rain ").)
,, When fully discharged, a battery pack damages the internal cells. The battery pack may be prone to leakage
when fully discharged. Charge the battery pack at least once per 6 months to prevent complete discharge of the
battery pack.
About the battery life
Battery capacity decreases over time and through repeated use. If decreased usage time between charges becomes
significant, it is probably time to replace it with a new one.
Each battery's life is affected by storage, operating and environmental conditions.
Using the HD camcorder with the AC power adaptor
It is recommended that you use the AC power adaptor to power the HD camcorder from a household AC outlet
when you perform settings on it, play back, or edit images, or use it indoors. "_page 13
Z_,, Before detaching the power source, make sure that the HD camcorder's power is turned off. Failure to do
C*UT,ON SOcan result in camcorder malfunction.
,, Use a nearby wall outlet when using the AC power adaptor. Disconnect the AC power adaptor from the wall
outlet immediately if any malfunction occurs while using your HD camcorder.
,, Do not use the AC power adaptor in a narrow space, such as between a wall and furniture.
16 English
BASIC HD CAMCORDER OPERATION
set the appropriate operationmode according to your preferenceusingthe POWERswitchand MODE button.
Turning the HD camcorder on and off
You can turn the camcorder on or off by sliding the POWER switch downward.
,, Set the date and time when using your HD camcorder for the first time.
_page 25
,, When you use your HD camcorder for the first time or you reset it. you will
see the "Date/Time Set" menu for the startup display, ifyou do not set
the date and time. the date and time setting screen appears every time
you turn on your camcorden
Setting the operating modes
,, You can sw4tch the operating mode in the following order each time you press
the MODE button.
Movie mode (_) -, Photo mode (0) -' Play mode (_) -, Movie mode (_)
o Each time the operational mode changes, the respective mode indicator
lights up.
Movie mode (_): To record movie images. ',.*page 31
Photo mode (0): To record photo images. _page 33
Play mode (0): To play movie or photo images, or edit them. _page 38
,, When the HD camcorder is turned on. the seh_diagnosis function
operates and a message may appear. In this case. refer to "Warning
indicators and messages" (on pages 97 100) and take corrective action.
,, Movie mode is set by default with the power on.
System Reset
Ifthe HD camcorder does not operate normally, perform "System Reset": The HD
camcorder may recover to normal. "System Reset" will reset all settings to factory
defaults. The date and time will also be reset: Set the date and time again before
using the HD camcorder.
1. Turn the HD camcorder off.
,, Remove the battery pack or AC adaptor.
2. Use a fine tipped pen to hold down the RESET button.
,, All settings will be reset.
Do not press the RESET button with undue force.
MODE button
English 17
reK) r t on
I I
SCREEN INDICATORS
_" The OSD indicators are based on memory
capacity of 4GB (built in memory).
,, The above screen is an example for explanation:
It is different from the actual display.
,, Functions marked with * will not be retained when
the HD camcorder is powered on after turning it
off.
,, For enhanced performance, the display
indications and the order are subject to change
without prior notice.
18 English
Movie record mode
[_T)Movie record mode
(_ Operating mode (STBY (standby) or ® (recording))
Time counter (movie recording time) / Self timer*
@ Warning indicators and messages
Remaining recordable time
(A) Storage media (builtqn memory (SC-HMX10A/HMX10C
only) or memory card)
Battery info.(remaining battery level/time)
[_ Movie image quality
_) LCD enhancer
1@Anti-Shake (EIS)
1@LED light*
Telemacro
Wind cut
Back light
Component out (when component cable is connected.)
TV type (whencomponent or Multi-AVcable is connected)
Menu tab
Zoom / Digital zoom position*
Date/Time
Record/Play mode tab
Shutter speed*
Marlual exposure*
Manual focus*
White balance
Fader*
Scene mode (AE)/ EASY Q
Digital effect
Loading...