Samsung RS22T5561SR User Manual

22 cu. ft. Side-by-Side
MODEL RS22T5561 DIMENSIONS
Be sure your new fridge will fit
Don't wait until delivery to be sure your new refrigerator will t – both in your kitchen and through all doorways. This guide includes all pertinent measurements and clearances so you can buy with condence.
WIDTH
(FITS 36" OPENING)
7
35
/8"
DEPTH
WITHOUT
DOOR
24"
HEIGHT
WITH
HINGE
1
16
/
"
DEPTH
WITHOUT
HANDLE
5
/8"
28
70
TOP OF RE FRIGERATOR W ITH DOORS O PEN 90°
TOP OF REFRIGERATOR WITH DOORS OPEN
165° (FREEZER DOOR)
170° (REFRIGERATOR DOOR)
DEPTH
WITH D00R
OPEN 90°
16
467/
"
Counter-Depth Refrigerator
Counter-depth models sit ush with your kitchen cabinets for a premium, built-in look. They are perfect for galley and island kitchens where space is limited.
Measure height including flooring. Be sure to allow for hinge clearance height if needed.
Measure width including countertop overhang.
Measure depth including molding or trim.
165° 170°
681/4"
Installation clearances
3Allow 3.75" of clearance when installing along a wall.
This will allow for the door to open 90 degrees without the handle contacting the wall.
3Allow 2" minimum clearance at rear for proper air
circulation and water/electrical connections.
3Allow a 3/8" minimum clearance at sides and top
for ease of installation.
For optimal usage and ability to open refrigerator doors completely, do not install next to a wall.
Please note: The above dimension and cutout information is for planning purposes only. For complete installation details, consult manual packed with product, or download manual online at samsung.com.
Walk the delivery route
3Identify the narrowest opening that the appliance will travel, from outside the home to the location where it will be installed. 3Appliance depth or width must be smaller than the width of the narrowest opening.
Loading...