SMART Signage TV
User Manual
RM40D RM48D
The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Recommended hours of use per day of this product is under 16 hours.
If the product is used for longer than 16 hours a day, the warranty may be void.
BN46-00439B-00
Table of contents
Before Using the Product
Copyright |
6 |
|
|
Safety Precautions |
7 |
Symbols |
7 |
Cleaning |
7 |
Storage |
8 |
Electricity and Safety |
8 |
Installation |
9 |
Operation |
11 |
Preparations
Checking the Components |
15 |
|
|
Parts |
17 |
Control Panel |
17 |
Reverse Side |
19 |
Anti-theft Lock |
20 |
Remote Control |
21 |
|
|
Before Installing the Product |
|
(Installation Guide) |
23 |
Tilting Angle and Rotation |
23 |
Ventilation |
23 |
|
|
Dimensions |
24 |
|
|
Installing the Wall Mount |
25 |
Installing the Wall Mount Kit |
25 |
Wall Mount Kit Specifications |
26 |
Connecting and Using a Source
Device
Before Connecting |
27 |
Pre-connection Checkpoints |
27 |
|
|
Connecting to a PC |
27 |
Connection using the D-SUB cable |
|
(Analogue type) |
27 |
Connection Using an HDMI Cable |
28 |
Connection Using an HDMI-DVI Cable |
28 |
|
|
Connecting to a Video Device |
29 |
Connection Using the AV Cable |
29 |
Connection Using an HDMI-DVI Cable |
30 |
Connection Using an HDMI Cable |
30 |
|
|
Connecting to an Audio System |
31 |
|
|
Connecting the Antenna |
31 |
|
|
Connecting to a TV Viewing Card slot |
32 |
To connect the CI CARD, follow these steps: |
32 |
|
|
Initial Setup |
33 |
|
|
Changing the Input source |
33 |
Source List |
33 |
Screen Adjustment
Picture Mode |
34 |
If the input source is PC or HDMI1 (when a PC is |
|
connected), HDMI2 (when a PC is connected) |
34 |
If the input source is TV, HDMI1, HDMI2 or AV |
34 |
|
|
Backlight / Contrast / Brightness / Sharpness / |
|
Colour / Tint (G/R) |
35 |
|
|
Picture Size |
36 |
Picture Size |
36 |
Position |
38 |
Zoom/Position |
38 |
4:3 Screen Size |
39 |
Resolution Select |
39 |
|
|
Auto Adjustment |
40 |
|
|
PC Screen Adjustment |
41 |
|
|
PIP |
42 |
PIP Settings |
42 |
|
|
Advanced Settings |
43 |
Dynamic Contrast |
44 |
Black Tone |
44 |
Flesh Tone |
44 |
RGB Only Mode |
44 |
Colour Space |
44 |
White Balance |
45 |
Gamma |
45 |
Motion Lighting |
45 |
|
|
Picture Options |
46 |
Colour Tone |
47 |
Colour Temp. |
47 |
Digital Clean View |
47 |
MPEG Noise Filter |
47 |
HDMI Black Level |
48 |
Film Mode |
48 |
2
Table of contents
Dynamic Backlight |
48 |
|
|
Picture Off |
49 |
|
|
Reset Picture |
49 |
Sound Adjustment
Sound Mode |
50 |
|
|
Sound Effect |
51 |
|
|
Speaker Settings |
52 |
|
|
Additional Settings |
53 |
DTV Audio Level |
53 |
Dolby Digital Comp |
53 |
|
|
Reset Sound |
54 |
Broadcasting
Auto Tuning |
55 |
Auto Tuning |
55 |
|
|
Cable Search Option |
56 |
|
|
Aerial |
57 |
|
|
Channel List |
58 |
Sorting |
58 |
Mode |
58 |
|
|
Schedule Manager |
60 |
Edit Channel |
61 |
|
|
Edit Favorites |
63 |
|
|
Channel Settings |
66 |
Country (Area) |
66 |
Manual Tuning |
66 |
Fine Tune |
67 |
Transfer Channel List |
67 |
Delete CAM Operator Profile |
67 |
|
|
Subtitle |
68 |
Subtitle |
68 |
Primary Subtitle |
68 |
Secondary Subtitle |
68 |
|
|
Audio Options |
69 |
Audio Language |
69 |
Audio Format |
69 |
Audio Description |
69 |
|
|
Programme Rating Lock |
70 |
|
|
Teletext Language |
71 |
Teletext Language |
71 |
Primary Teletext |
71 |
Secondary Teletext |
71 |
|
|
Common Interface |
72 |
CI Menu |
72 |
CAM video transcoding |
72 |
Application Info |
72 |
|
|
Channel Lock |
73 |
Network
Network Status |
74 |
|
|
Network Settings |
74 |
Network Setting (Wireless) |
75 |
WPS(PBC) |
77 |
|
|
Soft AP (Wi-Fi Hotspot) |
78 |
|
|
Wi-Fi Direct |
79 |
|
|
AllShare Settings |
80 |
|
|
Device Name |
80 |
Applications
Source List |
81 |
|
|
MagicInfo |
82 |
Playing content from the internal memory or |
|
USB |
82 |
Playing PC or mobile content |
82 |
Schedule |
83 |
MagicInfo Express Content Creator
Using MagicInfo Express Content Creator |
85 |
Managing templates |
85 |
Managing schedules |
85 |
3
Table of contents
Playing photos, videos and music (Media Play)
Read the following before using media play |
|
with a USB device |
86 |
Using a USB device |
88 |
Menu items in the media content list page |
89 |
|
|
Available buttons and features during photo |
|
playback |
90 |
|
|
Available buttons and features during video |
|
playback |
91 |
|
|
Available buttons and features during music |
|
playback |
92 |
|
|
Supported Subtitle and Media play file |
|
formats |
93 |
Subtitle |
93 |
Supported image resolutions |
93 |
Supported music file formats |
94 |
Supported Video Formats |
94 |
System
Setup |
97 |
Initial settings (Setup) |
97 |
|
|
Menu Language |
99 |
|
|
Time |
100 |
Clock |
100 |
Sleep Timer |
101 |
On Timer |
101 |
Off Timer |
103 |
Holiday Management |
103 |
|
|
Eco Solution |
104 |
Energy Saving |
104 |
Eco Sensor |
104 |
No Signal Power Off |
105 |
Auto Power Off |
105 |
|
|
Auto Protection Time |
106 |
|
|
Screen Burn Protection |
107 |
Pixel Shift |
107 |
Timer |
108 |
Immediate display |
110 |
Side Grey |
110 |
|
|
Ticker |
111 |
Ticker |
111 |
|
|
Source AutoSwitch Settings |
112 |
Source AutoSwitch |
112 |
|
|
General |
113 |
Game Mode |
113 |
Auto Power |
113 |
Safety Lock |
113 |
Button Lock |
114 |
USB Auto Play Lock |
114 |
Standby Control |
114 |
Lamp Schedule |
115 |
OSD Display |
115 |
|
|
Change PIN |
116 |
Clone Product |
117 |
|
|
Reset System |
117 |
|
|
Reset All |
118 |
|
|
DivX®Video On Demand |
118 |
Support
Software Update |
119 |
Update now |
119 |
|
|
Use Mode |
119 |
|
|
Contact Samsung |
120 |
Troubleshooting Guide
Requirements Before Contacting Samsung |
|
Customer Service Centre |
121 |
Testing the Product |
121 |
Checking the Resolution and Frequency |
121 |
Check the followings. |
122 |
|
|
Q & A |
128 |
4
Table of contents
Specifications
General |
130 |
|
|
Power Consumption |
132 |
|
|
Preset Timing Modes |
133 |
Appendix
Contact SAMSUNG WORLD WIDE |
135 |
|
|
Responsibility for the Pay Service |
|
(Cost to Customers) |
144 |
Not a product defect |
144 |
A Product damage caused by customer's fault |
144 |
Others |
144 |
WEEE |
145 |
Correct Disposal of This Product |
|
(Waste Electrical & Electronic Equipment) |
145 |
Correct disposal of batteries in this product |
145 |
|
|
Optimum Picture Quality and Afterimage |
|
|
|
Burn-in Prevention |
146 |
Optimum Picture Quality |
146 |
Prevention of Afterimage Burn-in |
146 |
|
|
Licence |
148 |
|
|
Terminology |
149 |
5
Chapter 01
Before Using the Product
Copyright
The contents of this manual are subject to change without notice to improve quality.
© 2014 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Microsoft, Windows are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Ownership of all other trademarks is attributed to their due owner.
•• An administration fee may be charged if either
-- (a) an engineer is called out at your request and there is no defect in the product (i.e. where you have failed to read this user manual).
-- (b) you bring the unit to a repair centre and there is no defect in the product (i.e. where you have failed to read this user manual).
•• The amount of such administration charge will be advised to you before any work or home visit is carried out.
6
Safety Precautions
Caution
RISK OF ELECTRIC SHOCK DO NOT OPEN
Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK) THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high voltage is present inside.
It is dangerous to make any kind of contact with any internal part of this product.
This symbol alerts you that important literature concerning operation and maintenance has been included with this product.
Symbols
Warning
A serious or fatal injury may result if instructions are not followed.
Caution
Personal injury or damage to properties may result if instructions are not followed.
Activities marked by this symbol are prohibited.
Instructions marked by this symbol must be followed.
Cleaning
――Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. ――Take the following steps when cleaning.
――The following images are for reference only. Real-life situations may differ from what is shown in the images.
1 |
Power off the product and computer. |
2 |
Disconnect the power cord from the product. |
――Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result.
3 Wipe the product with a clean, soft and dry cloth.
•• Do not use detergents that contain alcohol, solvent or
surface-active agents.
!
•• Do not spray water or detergent directly on the product.
4 Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the product.
5 |
Connect the power cord to the product when cleaning is finished. |
6 |
Power on the product and computer. |
7
Storage
Due to the characteristics of high-glossy products, using a UV humidifier nearby may create whitecoloured stains on the product.
――Contact Customer Service Centre if the inside of the product needs cleaning (service fee will be charged).
Electricity and Safety
――The following images are for reference only. Real-life situations may differ from what is shown in the images.
Warning
Do not use a damaged power cord or plug, or a loose power socket.
•• An electric shock or fire may result.
Do not use multiple products with a single power socket.
•• Overheated power sockets may cause a fire.
Do not touch the power plug with wet hands. Otherwise, an electric shock may result.
Insert the power plug all the way in so it is not loose.
•• An unsecure connection may cause a fire.
!
Connect the power plug to a grounded power socket (type 1 insulated devices only).
•• An electric shock or injury may result.
!
Do not bend or pull the power cord with force. Be careful not to leave the power cord under a heavy object.
•• Damage to the cord may result in a fire or electric shock.
Do not place the power cord or product near heat sources.
•• A fire or electric shock may result.
Clean any dust around the pins of the power plug or the power socket with a dry cloth.
•• A fire may result.
!
8
Caution
!
!
!
Do not disconnect the power cord while the product is being used.
•• The product may become damaged by an electric shock.
Only use the power cord provided with your product by Samsung. Do not use the power cord with other products.
•• A fire or electric shock may result.
Keep the power socket where the power cord is connected unobstructed.
•• The power cord must be disconnected to cut off power to the product when an issue occurs.
•• Note that the product is not completely powered down by using only the power button on the remote.
Hold the plug when disconnecting the power cord from the power socket.
•• An electric shock or fire may result.
Installation
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
•• A fire may result.
Have a technician install the wall-mount hanger.
•• Installation by an unqualified person can result in an injury.
•• Only use approved cabinets.
!
Do not install the product in poorly ventilated spaces such as a bookcase or closet.
•• An increased internal temperature may cause a fire.
Install the product at least 10 cm away from the wall to allow ventilation.
•• An increased internal temperature may cause a fire.
!
Keep the plastic packaging out of the reach of children.
•• Children may suffocate.
!
9
!
!
! |
Bend and keep part of the outdoor TV antenna cable hanging downwards (the part inside the room) to prevent rainwater from entering the product.
•• If rainwater enters the product, a fire or electric shock can occur.
When using an outdoor antenna, be sure to install the antenna away from nearby power lines to prevent the antenna from collapsing onto them in strong winds.
•• A collapsed antenna can cause an electric shock or injury.
Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.)
•• The product may fall and become damaged and/or cause an injury.
•• Using the product in an area with excess vibration may damage the product or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke.
•• A fire or electric shock may result.
Do not expose the product to direct sunlight, heat, or a hot object such as a stove.
•• The product lifespan may be reduced or a fire may result.
Do not install the product within the reach of young children.
•• The product may fall and injure children.
•• As the front is heavy, install the product on a flat and stable surface.
Edible oil, such as soybean oil, can damage or deform the product. Do not install the product in a kitchen or near a kitchen counter.
10
Caution
!
!
SAMSUNG
!
Do not drop the product while moving.
•• Product failure or personal injury may result.
Do not set down the product on its front.
•• The screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of the product is not protruding.
•• The product may fall and become damaged and/or cause an injury.
•• Install the product only on cabinets or shelves of the right size.
Set down the product gently.
•• Product failure or personal injury may result.
Installing the product in an unusual place (a place exposed to a lot of fine dust, chemical substances, extreme temperatures or a significant presence of moisture, or a place where the product will operate continuously for an extended period of time) may seriously affect its performance.
•• Be sure to consult Samsung Customer Service Centre if you want to install the product at such a place.
Operation
Warning
There is a high voltage inside the product. Never disassemble, repair or modify the product yourself.
•• A fire or electric shock may result.
•• Contact Samsung Customer Service Centre for repairs.
Before moving the product, turn off the power switch and disconnect the power cord, antenna cable and all other connected cables.
•• Damage to the cord may result in a fire or electric shock.
!
If the product generates abnormal sounds, a burning smell or smoke,
disconnect the power cord immediately and contact Samsung Customer
Service Centre.
•• An electric shock or fire may result.
!
Do not let children hang from the product or climb on top of it.
•• Children may become injured or seriously harmed.
If the product is dropped or the outer case is damaged, turn off the power switch and disconnect the power cord. Then contact Samsung Customer Service Centre.
•• Continued use can result in a fire or electric shock.
11
!
!
!
GAS
Do not leave heavy objects or items that children like (toys, sweets, etc.) on |
|
Do not use or keep combustible spray or an inflammable substance near |
top of the product. |
|
the product. |
•• The product or heavy objects may fall as children try to reach for the |
|
•• An explosion or fire may result. |
toys or sweets resulting in a serious injury. |
|
|
|
! |
|
During a lightning or thunderstorm, remove the power cable and do not |
|
Ensure the vents are not blocked by tablecloths or curtains. |
touch the antenna cable. |
|
•• An increased internal temperature may cause a fire. |
|
|
|
•• A fire or electric shock may result. |
|
|
Do not drop objects on the product or apply impact. |
|
Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects |
•• A fire or electric shock may result. |
100 |
that burn easily (paper, matches, etc) into the product (via the vent or input/ |
|
||
|
output ports, etc). |
|
|
|
|
|
|
•• Be sure to power off the product and disconnect the power cord |
|
|
when water or other foreign substances have entered the product. |
Do not move the product by pulling the power cord or any cable. |
|
Then contact Samsung Customer Service Centre. |
|
•• Product failure, an electric shock or fire may result. |
|
•• Product failure, an electric shock or fire may result from a damaged |
|
|
|
|
|
cable. |
|
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic |
|
|
objects on top of the product. |
|
|
•• Be sure to power off the product and disconnect the power cord |
If a gas leakage is found, do not touch the product or power plug. Also, |
|
when water or other foreign substances have entered the product. |
|
Then contact Samsung Customer Service Centre. |
|
ventilate the area immediately. |
|
|
|
|
|
•• Sparks can cause an explosion or fire. |
|
•• Product failure, an electric shock or fire may result. |
|
|
|
Do not lift or move the product by pulling the power cord or any cable. |
|
|
•• Product failure, an electric shock or fire may result from a damaged |
|
|
cable. |
|
|
12
Caution
!
-_-
!
!
!
Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels.
•• Activate power-saving mode or a moving-picture screen saver if you will not be using the product for an extended period of time.
Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc).
•• Dust accumulation combined with heat can cause a fire, electric shock or electric leakage.
Use the product at the recommended resolution and frequency.
•• Your eyesight may deteriorate.
Do not hold the product upside-down or move it by holding the stand.
•• The product may fall and become damaged or cause an injury.
Looking at the screen too close for an extended period of time can deteriorate your eyesight.
Do not use humidifiers or stoves around the product.
•• A fire or electric shock may result.
Rest your eyes for more than 5 minutes for every 1 hour of product use.
•• Eye fatigue will be relieved.
!
Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.
Store small accessories out of the reach of children.
!
Exercise caution when adjusting the product angle or stand height.
•• Your hand or finger may get stuck and injured.
•• Tilting the product at an excessive angle may cause the product to fall
and an injury may result.
!
Do not place heavy objects on the product.
•• Product failure or personal injury may result.
When using headphones or earphones, do not turn the volume too high.
•• Having the sound too loud may damage your hearing.
13
Be careful that children do not place the battery in their mouths when removed from the remote control. Place the battery in a location that children or infants cannot reach.
•• If children have had the battery in their mouths, consult your doctor immediately.
When replacing the battery, insert it with the right polarity (+, -).
•• Otherwise, the battery may become damaged or it may cause fire, personal injury or damage due to leakage of the internal liquid.
Use only the specified standardized batteries, and do not use a new battery and a used battery at the same time.
•• Otherwise, the batteries may be damaged or cause fire, personal injury or damage due to a leakage of the internal liquid.
!
The batteries (and rechargeable batteries) are not ordinary refuse and must be returned for recycling purposes. The customer is responsible for returning
the used or rechargeable batteries for recycling.
•• The customer can return used or rechargeable batteries to a nearby ! public recycling centre or to a store selling the same type of the
battery or rechargeable battery.
14
Chapter 02
Preparations
-- Contact the vendor where you purchased the product if any components are missing.
-- The appearance of the components and items sold separately may differ from the image shown.
Checking the Components
Components
――Components may differ in different locations.
|
|
Warranty card |
|
|
User manual / MagicInfo Express |
||
Quick setup guide |
(Not available in some |
Regulatory guide |
|||||
Content Creator USB |
|||||||
|
|
locations) |
|
|
|||
|
|
|
|
|
|
||
|
|
|
|
|
|
|
Batteries |
Power cord |
Mini Wall-mount Kit |
||||
|
Remote Control |
|||||
(Not available in some locations) |
|
|
|
|
||
|
|
|
|
|
|
|
Stand base |
Stand neck |
15
Items sold separately
-- The following items can be purchased at your nearest retailer.
HDMI cable
Stereo cable
HDMI-DVI cable |
Video cable |
|
Audio cable |
RCA stereo cable |
||
|
|
|
|
|
|
|
D-SUB cable
16
Parts
Control Panel
POWER
Speaker
Panel Key
Remote sensor
――The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
Panel Key
Buttons |
Description |
|
|
|
|
|
Power on the product. |
|
|
If you press the button when the product is turned on, the control menu will be |
|
|
displayed. |
|
|
――To exit the OSD menu, press and hold the panel key for at least one second. |
|
|
Move to the upper or lower menu. You can also adjust the value of an option. |
|
|
Change the channel in TV mode. |
|
|
|
|
|
Move to the left or right menu. |
|
|
――You can adjust the volume by moving the panel key left or right when the control |
|
|
menu is not displayed. |
|
|
|
|
|
Press a button on the remote control pointing at the sensor on the front of the |
|
Remote sensor |
product to perform the corresponding function. |
|
――Using other display devices in the same space as the remote control of this |
||
|
||
|
product can cause the other display devices to be inadvertently controlled. |
Use the remote control within 7 m to 10 m from the sensor on the product at an angle of 30 from the left and right. ――Store used batteries out of reach of children and recycle.
――Do not use a new and used battery together. Replace both batteries at the same time. ――Remove batteries when the remote control is not to be used for an extended period of time.
17
――If you press the button on the panel key when the product is turned on, the control menu will be displayed.
Buttons |
Description |
Select the connected input source.
Control menu
Return
Source |
Move the panel key right to select Source in the control menu. |
|
When the list of input sources is displayed, move the panel key up or down to select |
the desired input source. Next, press the panel key.
|
|
|
Display the OSD menu. |
|
|
|
Menu |
Move the panel key left to select Menu in the control menu. The OSD control |
|
|
|
screen will appear. Move the panel key right to select the desired menu. |
||
|
|
|
You can select a sub-menu item by moving the panel key up, down, left, or right. |
|
|
|
|
To change settings, select the desired menu and press the panel key. |
|
|
|
|
|
|
|
|
MagicInfo |
Enter MagicInfo mode. |
|
|
|
Move the panel key up to select MagicInfo |
in the control menu. |
|
|
|
|||
|
|
|
||
|
|
|
|
|
|
|
|
Power off the product. |
|
|
|
Power off |
Move the panel key down to select Power off |
in the control menu. |
|
|
|
||
|
|
|
Next, press the panel key. |
|
|
|
|
|
|
|
|
Return |
Exit the control menu. |
|
|
|
|
|
|
18
Reverse Side
――The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
COMMON INTERFACE
HDMI IN 2 (DVI)
HDMI IN 1 (STB)
USB (5V 0.5A) / CLONING
ANT IN
AIR/CABLE
AUDIO
OUT
RS232C IN
PC
AUDIO
IN
PC IN
AV IN
<![if ! IE]><![endif]>R AUDIO L VIDEO
Port |
|
Description |
|
|
|
COMMON INTERFACE |
Connect to a CI card. |
|
|
|
|
HDMI IN 2 (DVI) |
Connects to a source device using a HDMI cable or HDMI-DVI cable. |
|
|
|
|
HDMI IN 1 (STB) |
Connects to a source device using a HDMI cable or HDMI-DVI cable. |
|
|
|
|
USB |
(5V 0.5A) / CLONING |
Connect to a USB memory device. |
|
|
|
ANT IN AIR/CABLE |
Connect to an antenna cable. |
|
|
|
|
AUDIO OUT |
Connects to the audio of a source device. |
|
|
|
|
RS232C IN |
Used for service purposes. |
|
|
|
|
AV IN VIDEO / L-AUDIO-R |
Connect to an external device using a video or Audio cable. |
|
|
|
|
PC AUDIO IN |
Receives sound from a PC via an audio cable. |
|
|
|
|
PC IN |
|
Connects to a source device using a D-SUB cable. |
|
|
|
19
Anti-theft Lock
――An anti-theft lock allows you to use the product securely even in public places.
――The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. ――The following images are for reference only. Real-life situations may differ from what is shown in the images.
To lock an anti-theft locking device:
1
2
3
4
Fix the cable of your anti-theft locking device to a heavy object such as a desk.
Put one end of the cable through the loop on the other end.
Insert the locking device into the anti-theft lock slot at the back of the product.
Lock the locking device.
-- An anti-theft locking device can be purchased separately.
-- Refer to the user guide provided with your anti-theft locking device for details. -- Anti-theft locking devices can be purchased at electronics retailers or online.
20
Remote Control
――Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. ――A button without a description in the image below is not supported on the product.
Turns the product On/Off.
Alternately selects Teletext, Double or Mix.
Adjust the volume.
Display channel list on the screen.
Display the main on-screen menu.
GUIDE
TTX/MIX
CH LIST
HOME CONTENT
Display and select available video sources.
Have direct access to channels.
Electronic Programme Guide (EPG) display.
Cut off the sound temporarily.
Change channels.
Swich to the MagicInfo Screen.
Swich to the MagicInfo Screen.
Remote control button functions may differ for different products.
21
Quickly select frequently used functions.
Select on-screen menu items and change menu values.
Return to the previous menu.
Configure the subtitle and audio description options.
Not Available.
CLOCK
A B C D
ALARM SUBT.
Press to display information on the TV screen. CLOCK: When you press INFO key in standby mode, TV screen displays the time.
Exit the menu.
Use TTX secondary function.
Play photos, videos or music.
Remote control button functions may differ for different products.
To place batteries in the remote control
――Insert 2 AAA batteries, making sure to align the positive and negative polarities correctly.
22
Before Installing the Product
(Installation Guide)
15 ˚
A
B
Figure 1.1 Side view
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
•• Ensure that an authorized installation company installs the wall mount.
•• Otherwise, it may fall and cause personal injury.
•• Make sure to install the specified wall mount.
Tilting Angle and Rotation
――Contact Samsung Customer Service Centre for further details.
•• The product can be tilted at a maximum angle of 15˚ from a perpendicular wall surface.
•• To use the product vertically (portrait), turn it clockwise so that the LED is pointing down.
Ventilation
Installation on a Perpendicular Wall
A Minimum 40 mm
B Ambient temperature: Under 35C
•• When installing the product on a perpendicular wall, allow at least 40 mm of space between the product and wall surface for ventilation and ensure that the ambient A temperature is kept below 35C.
23
B |
A
C
E |
Figure 1.2 Side view
Figure 1.3 Side view
D
D
Installation on an Indented Wall
――Contact Samsung Customer Service Centre for further details.
Plane view
A Minimum 40 mm B Minimum 70 mm C Minimum 50 mm D Minimum 50 mm
E Ambient temperature: Under 35C
――When installing the product on an indented wall, allow at least the space specified above between the product and wall for ventilation and ensure that the ambient temperature is kept below 35C.
Dimensions
Unit: mm (inches)
Model name 1 |
2 |
3 |
4 |
5 |
|
5 |
RM40D |
906.6 (35.69) |
887.6 (34.94) |
500.2 (19.69) |
532.9 (20.98) |
65.1 (2.56) |
|
1 |
RM48D |
1075.1 (42.33) |
1056.1 (41.58) |
594.9 (23.42) |
627.6 (24.71) |
65.5 (2.58) |
|
|
||||||
2 |
4 |
――All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. |
|
||||
|
Refer to the dimensions prior to performing installation of your product. Not responsible for typographical or printed errors. |
||||||
|
|
||||||
|
3 |
|
|
|
|
|
|
24
Installing the Wall Mount
Installing the Wall Mount Kit
The wall mount kit allows you to mount the product on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount. We recommend you contact a technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own.
25
Wall Mount Kit Specifications
――Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other than plaster board, please contact your nearest dealer for additional information.
If you install the product on a slanted wall, it may fall and result in severe personal injury.
•• Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.
•• Do not use screws that are longer than the standard length or do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the product.
•• For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on the wall mount specifications.
•• Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.
•• Samsung is not liable for product damage or personal injury when non-specified wall mount is used or the consumer fails to follow the product installation instructions.
•• Do not mount the product at more than a 15 degree tilt.
•• Always have two people mount the product on a wall.
•• Standard dimensions for wall mount kits are shown in the table below.
Unit: mm (inches)
Model name |
Screw hole specs |
Standard Screw |
Quantity |
||
|
(A * B) in millimeters |
|
|
||
|
|
|
|
|
|
RM40D |
200 |
× 200 |
(7.87 × 7.87) |
|
|
|
|
|
|
M8 / L14~16 |
4 |
RM48D |
400 |
× 400 |
(15.75 × 15.75) |
|
|
――Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to electric shock.
26
Chapter 03
Connecting and Using a Source Device
Before Connecting
Pre-connection Checkpoints
――Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to device.
――Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product.
――Connect the sound ports correctly: left = white and right = red. ――Check the types of ports at the back of the product you want to connect.
Connecting to a PC
•• Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
•• A PC can be connected to the product in a variety of ways. Select a connection method suitable for your PC.
――Connecting parts may differ in different products.
Connection using the D-SUB cable (Analogue type)
PC IN
PC AUDIO IN
27
Connection Using an HDMI Cable |
Connection Using an HDMI-DVI Cable |
|
――When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access |
|
video and audio content stored on the PC. |
HDMI IN 1 (STB), HDMI IN 2
HDMI IN 1 (STB), HDMI IN 2
PC AUDIO IN
28
Connecting to a Video Device
•• Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
•• You can connect a video device to the product using a cable. ――Connecting parts may differ in different products.
――Press the SOURCE button on the remote control to change the source.
Connection Using the AV Cable
AV IN / VIDEO
AV IN / L-AUDIO-R
29
Connection Using an HDMI-DVI Cable
――Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. To resolve this, additionally connect an audio cable to the audio ports on the product and video device. When you connect a video device to the product using an HDMI-DVI cable, set Edit Name to DVI Devices to access video and audio content stored on the video device.
――Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and 576p.
HDMI IN 1 (STB), HDMI IN 2 (DVI)
PC AUDIO IN
Connection Using an HDMI Cable
Using an HDMI cable (up to 1080p)
•• For better picture and audio quality, connect to a digital device using an HDMI cable.
•• An HDMI cable supports digital video and audio signals, and does not require an audio cable.
•• The picture may not display normally (if at all) or the audio may not work if an external device that uses an older version of HDMI mode is connected to the product. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.
•• Be sure to use an HDMI cable with a thickness of 14 mm or less.
•• Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur.
•• A basic high-speed HDMI cable or one with ethernet is recommended. This product does not support the ethernet function via HDMI.
HDMI IN 1 (STB), HDMI IN 2 (DVI)
30