Samsung NL22B User Manual

NL22B

User Manual

The color and the appearance may differ depending on the product, and the specications are subject to change

without prior notice to improve the performance.

BN46-00298A-02

Table of

Chapter. 1

BEFORE USING THE

Chapter. 3

CONNECTIONS

Contents

PRODUCT

4 Copyright 5 Securing the Installation Space 5 Safety Precautions

5 Symbols

6 Electricity and Safety 7 Installation and Safety 8 Operation and Safety 11 Precautions for Using the Product 12 Cleaning

Chapter. 2

PREPARATION

13 Checking the Contents

13 Removing the Packaging 14 Checking the Components

15 Parts

15 External Sensor 16 Rear View 16 Remote Control 18 Product dimensions

19 Using the Product

19 Pre-connection Checkpoints

19 LAN Connection 19 Connecting to a USB Device 20 Connecting the Power

20 Changing the Resolution 21 Putting in Devices for Display in the

NL22B

22 Playing Image or Video les from USB

Memory

Chapter. 4

SCREEN SETUP

23 Mode 23 Custom 24 Color Control 25 Lamp Control 25 Picture Reset

Chapter. 5

CONFIGURING THE SOUND SETTINGS

26 Mode 27 Custom 27 Auto Volume 28 SRS TS XT 28 Sound Reset

Chapter. 6

SETUP AND RESET

29 Language 29 Time

29 Changing the Setting for Clock Set 30 Setting Sleep Timer

30 Conguring Timer1/Timer2/Timer3

31 Setting Holiday Management

32 Safety Lock

32 Changing Password (Change PIN)

32 Conguring Lock

33 Safety Screen

33 Setting Pixel Shift

33 Conguring Timer 34 Conguring Bar 34 Conguring Eraser 35 Conguring Pixel

35 Setting Side Grey

36 Power On Adjustment 36 Advanced Settings

36 Conguring Fan & Temperature

37 Changing the Auto Power Setting 37 Setting Lamp Schedule

38 Changing the OSD Display Settings

38 Setup Reset 39 Reset All

Chapter. 7

TROUBLESHOOTING GUIDE

40 Requirements Before Contacting

Samsung Customer Service Center

40 Checking the Resolution and Frequency 40 Check the following.

41 Q & A

Chapter. 8

SPECIFICATIONS

42 General

43 PowerSaver

44 Preset Timing Modes

Chapter. 9

APPENDIX

45 Contact SAMSUNG WORLD WIDE 49 Responsibility for the Pay Service

(Cost to Customers) 50 Correct Disposal 51 Optimum Picture Quality and

Afterimage Burn-in Prevention

52 What is afterimage burn-in?

54 Terminology

54 OSD(On Screen Display) 54 Gamma 54 Horizontal Frequency 54 Vertical Frequency 54 Resolution 54 Plug & Play

Chapter. 1

Before Using the Product

The contents of this manual are subject to change without notice to improve quality.

Electronics is prohibited.

The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics.

Microsoft VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.

Ownership of all other trademarks is attributed to their due owner.

• An administration fee may be charged if either

• The amount of such administration charge will be advised to you before any work or

and Windows are registered trademarks of Microsoft Corporation.

• (a) an engineer is called out at your request and there is no defect in the product (i.e, where you have failed to read this user manual).

• (b) you bring the unit to a repair center and there is no defect in the product (i.e, where you have failed to read this user manual).

home visit is carried out.

TruSurround XT, SRS and the symbol are trademarks of SRS Labs, Inc.

TruSurround XT technology is incorporated under license from SRS Labs, Inc.

Before Using the Product

Securing the Installation Space

Ensure some space around the product for ventilation. An internal temperature rise may cause

re and damage the product. Be sure to allow the amount of space as shown below or greater

when installing the product.

The exterior may differ depending on the product.

10 cm

10 cm 10 cm

Precautions for storage

High-glossy models can develop white stains on the surface if an ultrasonic wave humidier is used nearby.

Contact your nearest Samsung Customer Service Center if you want to clean the inside of

the product (Service fee will be charged.)

10 cm

Safety Precautions

Caution

Do not open the cover. You may suffer an electric shock. The components inside this product must not be repaired by home users. Contact a technician for repair.

Symbols

Warning

Caution

A serious or fatal injury may result if instructions are not followed.

Personal injury or damage to properties may result if instructions are

not followed.

Activities marked by this symbol are prohibited.

Instructions marked by this symbol must be followed.

Before Using the Product

Electricity and Safety

The following images are for reference only. Real-life situations may differ from what is shown in the images.

Warning

Do not use a damaged power cable or plug, or a loose power socket.

An electric shock or re may result.

Do not use multiple products with a single power socket.

Otherwise, the socket may cause a re.

Do not touch the power cable with wet hands.

Otherwise, an electric shock may result.

Insert the power cable all the way in so it is not loose.

An unsecure connection may cause a re.

Caution

Do not bend or pull the power cable with force. Also, do not place a heavy object on the power cable.

Damage to the cord may result in a re or electric shock.

Do not place the power cable or product near heat sources.

A re or electric shock may result.

Do not disconnect the power cable while the product is being used.

The product may become damaged by an electric shock.

Only use the power cable provided with your product by Samsung. Do not

use the power cord with other products.

A re or electric shock may result.

Keep the power socket where the power cable is connected unobstructed.

In the event of a problem with the product, you must disconnect the power cable to cut the power supply to the product.

Be sure to plug the power cable into a grounded power socket. (type 1

insulated devices only).

An electric shock or injury may result.

Clean any dust around the pins of the power cable or the power outlet

using a dry cloth.

A re may result.

Hold the plug when disconnecting the power cable from the power socket.

A re or electric shock may result.

Before Using the Product

Installation and Safety

The following images are for reference only. Real-life situations may differ from what is shown in the images.

Warning

DO NOT PLACE CANDLES,INSEC T REPELLAN TS OR CIGARETTES ON TOP OF TH E PR ODUCT.DO NOT I NSTALL THE PRO DUCT NEAR HEAT SO URC

ES .

A re may resullt.

Do not install the product in poorly ventilated spaces such as a bookcase or

closet.

An increased internal temperature may cause a re.

Keep the plastic packaging out of the reach of children.

Children may suffocate.

Do not install the product on an unstable or vibrating surface (insecure

shelf, sloped surface, etc.)

The product may fall and become damaged and/or cause an injury.

Using the product in an area with excess vibration may damage the product or cause a re.

Do not expose the product to direct sunlight, heat, or a hot object such as

a stove.

The product lifespan may be reduced or a re may result.

Do not install the product within the reach of young children.

The product may fall and injure children.

Edible oil, such as soybean oil, can damage or deform the product. Do not

install the product in a kitchen or near a kitchen counter.

Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke.

A re or electric shock may result.

Before Using the Product

SAMSUNG

Caution

When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of the product is not protruding.

The product may fall and break or cause a personal injury.

Install the product only on cabinets or shelves of the right size.

Installing the product in an unusual place (a place exposed to a lot of ne particles, chemical substances or extreme temperatures, or an airport

or train station where the product should operate continuously for an extended period of time) may seriously affect its performance.

Be sure to consult Samsung Customer Service Center if you want to install the product at such a place.

Be careful not to drop the product when moving it. Place the product down gently and carefully.

Product failure or personal injury may result.

Do not set down the product on its front.

The screen may become damaged.

Operation and Safety

The following images are for reference only. Real-life situations may differ from what is shown in the images.

Warning

There is a high voltage inside the product. Never disassemble, repair or

modify the product yourself.

A re or electric shock may result.

Contact Samsung Customer Service Center for repairs.

Before moving the product, turn off the power switch and disconnect the

power cable and all other connected cables.

Damage to the cord may result in a re or electric shock.

If the product generates abnormal sounds, a burning smell or smoke, disconnect the power cable immediately and contact Samsung Customer

Service Center.

An electric shock or re may result.

If there is a thunderstorm or lightning strike, turn off the power and

disconnect the power cable.

A re or electric shock may result.

If the product is dropped or the outer case is damaged, turn off the power

switch and disconnect the power cable. Then contact Samsung Customer

Service Center.

Continued use can result in a re or electric shock.

Do not pull on the product holding only the power cable or any other cable.

Product failure, an electric shock or re may result from a damaged cable.

Before Using the Product

GAS

100

-_-

Do not lift or move the product by pulling the power cable or any cable.

Product failure, an electric shock or re may result from a damaged cable.

Do not drop objects on the product or apply impact.

A re or electric shock may result.

Do not let children hang from the product or climb on top of it.

Children may become injured or seriously harmed.

Do not leave heavy objects or items that children like (toys, sweets, etc.)

on top of the product.

The product or heavy objects may fall as children try to reach for the toys or sweets resulting in a serious injury.

Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the product.

Be sure to power off the product and disconnect the power cable when water or other foreign substances have entered the product. Then

contact Samsung Customer Service Center.

Product failure, an electric shock or re may result.

If a gas leakage is found, do not touch the product or power cable. Also,

ventilate the area immediately.

Sparks can cause an explosion or re.

Caution

Ensure the vents are not blocked by tablecloths or curtains.

An increased internal temperature may cause a re.

Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects that burn easily (paper, matches, etc) into the product (via the vent or

input/output ports, etc).

Be sure to power off the product and disconnect the power cable when water or other foreign substances have entered the product. Then

contact Samsung Customer Service Center.

Product failure, an electric shock or re may result.

Leaving the screen xed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels.

If you are not going to use the product for an extended period of time, activate power-saving mode or a moving-picture screen saver.

Disconnect the power cable from the power socket when not using the

product for an extended period of time (vacation, etc.).

Dust accumulation combined with heat can cause a re, electric shock

or electric leakage.

Use the product at the recommended resolution and frequency.

Your eyesight may deteriorate.

Looking at the screen too close for an extended period of time can deteriorate your eyesight.

Do not use or keep combustible spray or an inammable substance near

the product.

An explosion or re may result.

Before Using the Product

Rest your eyes for more than 5 minutes for every 1 hour of product use.

Eye fatigue will be relieved.

The front of the product may get hot when turned on for a long period of time. Take extra caution.

Store small accessories out of the reach of children.

Do not place heavy objects on the product.

Product failure or personal injury may result.

Be careful that children do not place the battery in their mouths when removed from the remote control. Place the battery in a location that

children or infants cannot reach.

If children have had the battery in their mouths, consult your doctor

immediately.

The batteries (and rechargeable batteries) are not ordinary refuse and must be returned for recycling purposes. The customer is responsible for returning the used or rechargeable batteries for recycling.

The customer can return used or rechargeable batteries to a nearby public recycling center or to a store selling the same type of the battery or rechargeable battery.

When replacing the battery, insert it with the right polarity (+, -).

Otherwise, the battery may become damaged or it may cause re,

personal injury or damage due to leakage of the internal liquid.

Use only the specied standardized batteries, and do not use a new battery and a used battery at the same time.

Otherwise, the batteries may be damaged or cause re, personal injury or

damage due to a leakage of the internal liquid.

Before Using the Product

Precautions for Using the Product

The following images are for reference only. Real-life situations may differ from what is shown in the images.

Do not move the product with an object inside.

The object may get damaged.

Do not move the product with the door open with an object inside.

The object may fall and get damaged.

When moving the product, be careful to ensure the product does not bump into any object.

A large portion of the product surface is made of glass. The glass is

fragile and susceptible to breaking if care is not taken.

Open or close the product door with caution. Body parts may get caught by the door causing injury.

Do not expose the product to food or any sort of wet materials, liquids or

sharp objects.

Do not put an animal or plant in the product.

Objects in the product may get hot due to the built-in LED when the

product is turned on for a long period of time. Take extra caution.

Note that there is risk of deformation and discoloration to an object placed

inside the product for display for an extended period of time. This may occur due to light and heat from the LED source.

Before Using the Product

Cleaning

The following images are for reference only. Real-life situations may differ from what is shown in the images.

Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning.

1. Power off the product.

2. Remove the power cable from the product.

NOTE

Hold the power cable by the plug and do not touch the cable with wet hands.

Otherwise, an electric shock may result.

3. Wipe the product screen using a clean, soft and dry cloth.

Do not use detergents that contain alcohol, solvent or surface-active agents.

Do not spray water or detergent directly on the product.

4. To clean the exterior of the product, use a moist soft cloth and wring

thoroughly before wiping the exterior.

5. After cleaning the product, connect the power cable to the product.

6. Power on the product to use it.

321

3 4 5

Chapter. 2

Preparation

Checking the Contents

Removing the Packaging

The appearance of the actual product may differ from the images shown.

1. Remove the black locking device at the bottom of the box.

2. Using the grooves in the box, lift and remove the top of the box.

3. Check the components and remove the styrofoam and plastic bag.

NOTE

• The appearance of the actual product may differ from the image shown.

• This image is for reference only.

Preparation

4. Store the box in a dry area so that it can be used when moving the product in the future.

Checking the Components

Contact the vendor where you purchased the product if any components are missing. The appearance of the components and items sold separately may differ from the image

shown.

Components

NOTE

Components may vary depending on the country.

Quick setup guide Warranty card

User manual MagicInfo Software

(Not available in some

locations)

Power cable Remote Control Batteries

(Not available in

some locations)

Items sold separately

LAN cable USB keyboard USB mouse USB cable

DVD

Keys

Preparation

Parts

External Sensor

• The external sensor consists of a remote control sensor, light sensor, and function keys.

• The color and shape of parts may differ from what is shown. Specications are subject to change

without notice to improve quality.

SOURCE POWER

Icons Description

POWER Power on or off the product.

Air vent -

Aim the remote control towards this spot on the LCD Display.

Remote-control

sensor

Brightness sensor

Power lamp Turns on in power-on mode and blinks green in power-saving mode.

SOURCE Not enabled on this product

NOTE

Using other display devices in the same space as the remote control

of this product can cause the other display devices to be inadvertently

controlled.

Automatically detects the intensity of ambient light around a selected display and adjusts the screen brightness.

Preparation

USB3.0 LANUSB2.0

Service POWER S/W POWER IN

Power off the product.

Not available.

Return to the previous menu.

Not available.

Display or hide the onscreen display menu,

or return to the previous menu.

Move to the upper, lower, left or right menu, or adjust an option's setting. Activates a highlighted menu item.

Mute the sound. Unmuting the sound: Press MUTE again or press the volume control (+ VOL -) button.

Adjust the volume.

Not available.

Display information on the screen.

Exit the current menu.

Not available.

Power on the product.

Not available.

Not available. Not available.

It sets safe lock function.

Enter the password in the OSD menu, or change the channel.

Rear View

The color and shape of parts may differ from what is shown. Specications are subject to

change without notice to improve quality.

USB 3.0, USB 2.0

Port About ports

Connect to a USB device such as a keyboard, mouse or speaker.

Connect to a network using a LAN cable.

LAN

Dedicated to service technicians.

Service

Remote Control

NOTE

• Using other display devices in the same space as the remote control of this product can cause the other

display devices to be inadvertently controlled.

• Remote control button functions may differ for different products.

POWER S/W

POWER IN

Power switch

Power port

Preparation

7m ~ 10m

30˚

Adjusting the OSD with the Remote Control

Open the OSD menu.

Select from Picture, Sound, Setup in the displayed OSD menu screen.

Change settings as desired.

Finish setting.

Close the onscreen display (OSD) menu.

To place batteries in the remote control:

Remote Control Reception Range

Use the remote control within 7 m to 10 m from the sensor on the product at an angle of 30° from the left and right.

NOTE

• Keep used batteries out of the reach of children while they are waiting to be collected and disposed of.

• Do not use a new and used battery together. Replace both batteries at the same time.

• Remove batteries when the remote control is not to be used for an extended period of time.

NOTE

When purchasing a new remote control, batteries are not included.

+ 37 hidden pages