Samsung MX-HS8000 User guide [ml]

MX-HS8000

PREMIUM HI-FI Component System

user manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Safety Information

Warning

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

WARNING

• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CLASS 1 LASER PRODUCT

This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Complies with 21CFR 1040.10 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.

DANGER :

• VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. (FDA 21 CFR)

CAUTION :

• CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO THE BEAM. (IEC 60825-1)

This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury.

This symbol indicates important instructions accompanying the product.

• THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LÁSER CLASE 1

• An administration fee may be charged if either an engineer is called out at your request and there is no defect in the product

(i.e. where you have failed to read this user's manual). you bring the unit to a repair centre and there is no defect in the product

(i.e. where you have failed to read this user's manual).

• The amount of such administration charge will be advised to you before any work or home visit is carried out.

2 English

Precautions

• Ensure that the AC power supply in your house complies with the identification sticker located on the back of your product.

• Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (3 - 4 inches/7.5 - 10 cm).

• Do not place the product on amplifiers or other equipment which may become hot. Make sure the ventilation slots are not covered.

• Do not stack anything on top of the product.

• Before moving the product, ensure the Disc

Insert Slot is empty.

• To turn off the product completely, disconnect the AC plug from the wall outlet. Disconnect the AC plug from the wall outlet if you will leave the device unused for a long period of time.

• During thunderstorms, disconnect the AC plug from the wall outlet. Voltage spikes due to lightning could damage the product.

• Do not expose the product to direct sunlight or other heat sources. This could cause the product to overheat and malfunction.

• Protect the product from moisture, excess heat, and equipment creating strong magnetic or electric fields (i.e. speakers.).

• Disconnect the power cable from the AC supply if the product malfunctions.

• Your product is not intended for industrial use. It is for personal use only.

• Condensation may occur if your product or disc has been stored in cold temperatures. If transporting the product during the winter, wait approximately 2 hours until the product has reached room temperature before using.

• The batteries used with this product contain chemicals that are harmful to the environment. Do not dispose of batteries in the general household trash.

• Please check the volume level before playing not to startle the elderly, infirm and pregnant woman at a sudden loud sound.

• Place the loudspeakers at a reasonable distance on either side of the system to ensure good stereo sound.

• Direct the loudspeakers towards the listening area.

• Do not expose this apparatus to dripping or splashing. Do not place objects filled with liquids, such as vases, on the apparatus.

• To turn this apparatus off completely, you must disconnect it from the wall outlet. Consequently, the wall outlet and power plug must be readily accessible at all times.

• Use only a properly grounded plug and receptacle.

- An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

Disc Storage & Management

• Holding Discs

- Fingerprints or scratches on a disc may reduce sound and picture quality or cause skipping.

- Avoid touching the surface of a disc where data has been recorded.

- Hold the disc by the edges so that fingerprints will not get on the surface.

- Do not stick paper or tape on the disc.

• Cleaning Discs

- If you get fingerprints or dirt on a disc, clean it with a mild detergent diluted in water and wipe with a soft cloth.

- When cleaning, wipe gently from the inside to the outside of the disc.

• Disc Storage `Do not keep in direct sunlight. `Keep in a cool ventilated area. `Keep in a clean protection jacket and store

vertically.

01 Safety Information

3 English

Safety Information

Disc and Format Compatibility

This product does not support Secure (DRM) Media files.

CD-R Discs

• Some CD-R discs may not be playable depending on the disc recording device (CDRecorder or PC) and the condition of the disc.

• Use 650MB/74 minute CD-R discs. Do not use CD-R discs over 700MB/80 minutes as they may not be played back.

• Some CD-RW (Rewritable) media may not be playable.

• Only CD-Rs that are properly "closed" can be fully played. If the session is closed, but the disc is left open, you may not be able to fully play the disc.

MP3-CD Discs

• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.

• MP3 file names should contain no blank spaces or special characters (. / = +).

• Use discs recorded with a compression/ decompression data rate greater than 128Kbps.

• Only a consecutively written multisession disc can be played. If there is a blank segment in the Multisession disc, the disc can be played only up to the blank segment.

• If the disc is not closed, it will take longer to begin playback and not all of the recorded files may play.

• For files encoded in the Variable Bit Rate (VBR) format,( i.e. files encoded in both low bit rate and high bit rate - 32Kbps ~ 320Kbps), the sound may skip during playback.

• A maximum of 999 files can be played per CD.

Supported Audio Formats

File

Extension

*.mp3

*.wma

| NOTES |

✎Does not support WMA Professional codec. ✎The above table shows supported sampling

rates and bit rates. Files of not supported formats may not be played properly.

Audio Codec

MPEG 1 Layer3

MPEG 2 Layer3

MPEG 2.5 Layer3

Wave_Format_

MSAudio1

Wave_Format_

MSAudio2

Sampling

Rate

16KHz ~

48KHz

16KHz ~

48KHz

16KHz ~

48KHz

16KHz ~

48KHz

16KHz ~

48KHz

Bit Rate

80Kbps ~

320Kbps

80Kbps ~

320Kbps

80Kbps ~

320Kbps

56Kbps ~

128Kbps

56Kbps ~

128Kbps

4 English

Contents

SAFETY INFORMATION

2 Warning 3 Precautions 3 Disc Storage & Management 4 Disc and Format Compatibility 4 Supported Audio Formats

GETTING STARTED

7 Front Panel 8 Rear Panel 9 Remote Control 10 Accessories 10 Connecting the Speakers 10 Cautions on Moving the Speakers 11 Attaching the toroidal ferrite core to the

power cord

11 Looping the power cable around the

toroidal core

FUNCTIONS

12 The Display function 12 Changing Display mode 12 The DEMO Music function 12 Playing a CD 12 Loading a Compact Disc 12 CD/MP3/CD-R Playback 13 Selecting a Track 13 Searching for a Specific Music Passage on

a CD

13 Repeat One or All Tracks on a CD

14 Playing USB Devices 14 USB Device Playback 14 To Select a File from a USB Device 15 To Use High Speed Search 15 To Delete a File 15 To Move to the Next/Previous Folder 15 To safely remove a USB device 15 Read Before Connecting USB Storage

Devices 16 Searching for a Track Quickly 16 Using the Program Function 16 Viewing or Editing Programmed Tracks 17 Bluetooth 17 What is Bluetooth? 17 To connect the Hi-Fi Component to a

Bluetooth device 18 To disconnect the Bluetooth device from

the Hi-Fi Component 18 To disconnect the Hi-Fi Component from

the Bluetooth device 18 Using Bluetooth Power On 19 TV SoundConnect 19 To connect the Hi-Fi Component to a

SoundConnect Compatible Samsung TV 19 To disconnect the TV from the Hi-Fi

Component 19 To disconnect the Hi-Fi Component from

the TV 20 Using My Karaoke 20 Auto Change Function 20 Listening to the Radio 20 To Store the Stations You Want 21 Selecting a Stored Station

Contents

5 English

Contents

21 Timer Function 21 Setting the Clock 21 Setting the Timer 23 Cancelling the Timer 23 The Recording Function 23 Basic Recording 24 Recording Speed 25 Special Sound Effects 25 Selecting EQ Mode 25 FOOTBALL MODE function 25 GOAL Function 26 GIGA SOUND Function 26 BEAT WAVING Function 26 DJ BEAT Function 27 +PANNING Funcion 27 NON-STOP MUSIC RELAY Function 27 DANCE TIME Function 27 TEMPO Function 27 Booting Sound Function

APPENDIX

28 Troubleshooting 29 Specifications

6 English

Getting Started

Front Panel

k j

Display Panel

BACKWARD SEARCH/SKIP button

CD/Bluetooth button

DISC slot

GIGA SOUND BEAT button

TUNER/AUX button

FORWARD SEARCH/SKIP button

PROGRAM button

Eject button for Disc

VOLUME/SEARCH JOG

EQ button

SEARCH button

POWER button

• Press this button to switch your product on or off.

ENTER button

USB button

USB REC button

DJ BEAT button

3 64 8 @9 !052 7

(

)

02 Getting Started

$ %

&*()be cf adgh

VOLUME / DJ button +PANNING button NON-STOP MUSIC RELAY button USB 2 jack for Playing and USB Recording PLAY/PAUSE button AUX IN 1 jack

Use to connect an external device such as an MP3 player.

• Connect AUX IN 1 on the front panel of the product to the Audio Out of an external device/MP3 player.

• Press the TUNER/AUX button to select AUX1.

MIC jack STOP button USB 1 jack for only Playback REMOTE CONTROL SENSOR FOOTBALL MODE button BEAT WAVING button DISPLAY / DEMO button TV SOUNDCONNECT button

7 English

Getting Started

Rear Panel

2 4 5 6 73

Cooling fan

• The fan operates while the unit is powered on. If you set the unit to the minimum

volume, the fan won't operate. Secure a minimum 6 inches (15 cm) of clear space on from all sides of the fan when installing the product.

POWER

• Insert only the provided power cable.

2.2 CH Speaker Terminals

1. To achieve the correct sound quality,

when you connect the speakers, match the color of the speaker plugs to the color of the speaker jacks. See below.

• LEFT channel (marked

• RIGHT channel (marked

• Don't force the Purple SUBWOOFER

connector into the White or Red speaker jack.

LED Terminals for Speaker Beat Waving, which do not distinguish

between left and right channel. ONLY FOR SERVICE

• This jack is for testing only. Please do not use.

, White/Purple).

, Red/Purple).

AUX IN 2 Terminals

1. Use an Audio Cable (not supplied) to connect AUX IN 2 on the product to Audio Out on an external analog output device.

• Be sure to match connector colors.

• If the external analog output device has

only one Audio Out jack, connect either left or right.

• Press the TUNER/AUX button to select

AUX 2.

• If the product is in AUX mode for more

than eight hours and no buttons on the front panel or remote are pushed, the system will turn off.

FM Antenna Terminals

1. Connect the FM antenna to the FM antenna connector terminal.

Slowly move the antenna wire until you find a location where reception is good, then

fasten it to a wall or other rigid surface.

If reception is poor, you may need to install an outdoor antenna. To do so, connect an outdoor FM antenna to the FM socket on the rear of the system using a 75Ω coaxial cable (not supplied).

8 English

Remote Control

Power

Bluetooth

USB

TUNING MODE

TUNER/AUX

NON-STOP MUSIC RELAY

TEMPO

SKIP

PLAY/PAUSE

STOP

FOOTBALL

VOLUME (–, +)

PROGRAM TIMER SET

TIMER ON/OFF

DISPLAY

MY KARAOKE

MUTE (Turn off the sound temporarily. Press again to turn the sound back on.)

BEAT WAVING

TV SoundConnect USB REC REC SPEED

MO/ST +PANNING

DJ BEAT

EFFECT LEVEL

REPEAT GIGA SOUND BEAT

GOAL

DANCE TIME

TUNING/ALBUM ,,

DELETE SLEEP (Set a sleep time to shut off the

product.)

AUTO CHANGE

MIC VOLUME –, +

02 Getting Started

Installing Batteries In The Remote Control

• Place batteries in the remote control so they match the polarity of the illustrations in the battery compartment. : (+) to (+) and (–) to (–).

• Do not dispose of batteries in a fire.

• Do not short circuit, disassemble, or overheat

the batteries.

• There is a danger of explosion if the battery is replaced with the wrong battery type.

• The remote control can be used up to approximately 23 feet (7 meters) in a straight line from the system.

9 English

Getting Started

Accessories

Check for the supplied accessories below.

User Manual Remote Control/Batteries

FM Antenna Power Cable Toroidal ferrite core

• Figures and illustrations in this user's manual are provided for reference only and may differ from actual product appearance.

Connecting the Speakers

Recommended speaker setup.

| IMPORTANT |

✎The product may not operate properly if it is

subject to shaking or external shocks or if the speakers are not installed as recommended.

✎Do not stretch the speaker wires or place a

heavy object on them.

Cautions on Moving the Speakers

• When moving the main unit and speakers, make sure to separate all connected speaker cables before.

• When separating the SPEAKERS LIGHTING cables, press the lock to release the connector as shown below.

10 English

Attaching the toroidal ferrite core to the power cord

Attaching the Toroidal ferrite core to the power cord helps prevent RF interference from radio signals.

1. Pull the fixing tab of the Toroidal ferrite core to open it.

2. Make two loops around the core with the power cable. See the illustration below.

3. Attach the Toroidal ferrite core to the power cord as shown in the illustration below, and then press it until it clicks.

Looping the power cable around the toroidal core

➜ ➜ ➜

Lift up to release the lock and open the core.

Make two loops around the core with the power cable. (Start winding 5 to 10 cm [2 - 4 in.] away from the core).

Close the lock.

02 Getting Started

11 English

Functions

The Display function

You can view functions available on the display, adjust the brightness of the display and set the Display/LED either on or off.

Changing Display mode

Press the DISPLAY/DEMO button on the product. Each time you press this button, the mode will

change as follows:

• The Dimmer function The Dimmer function is selected and the display darkens.

• LED OFF The Front display LED is turned off while the dimmer function is working.

• Clock ON The Clock you set is displayed.

• Display/LED ON All displays and the LED are turned on.

The DEMO Music function

Press the DISPLAY/DEMO button on the product or the DISPLAY button on the remote control for 5 seconds to start the Demo mode.

Each time you press either of these buttons, the mode will change as follows:

DIMMER display] ; LED On (unit/speaker)

;

LED Off (unit/speaker) ; --:-- [time

To cancel the Demo Music mode

• Press the DISPLAY/DEMO button on the product or DISPLAY button on the remote control again for 5 seconds. The DEMO mode is cancelled and the product is turns off.

• Press TUNER/AUX, CD/Bluetooth or USB button on the product. The DEMO mode is cancelled and the mode is changed to the mode you selected.

| NOTES |

✎When the DEMO music function is on, only the

POWER ( the buttons mentioned above work.

✎The DEMO sampler plays for 3 minutes; only

the message remains displayed on the front panel after its playback.

), VOL, MUTE ( ) buttons and

Playing a CD

Loading a Compact Disc

You can play standard compact discs that require no adapter.

1. Insert a disc gently into the disc slot with the disc's label facing up. The disc will be played automatically.

• You can load or unload compact discs

when the radio, USB, or auxiliary source function is selected. When you press the

button, all the other functions will

change to the CD mode.

• If no buttons are pressed on the product

or remote control for more than 3 minutes when the product is in Pause mode, it will change to Stop mode.

• If no buttons are pressed on the product

or remote control for more than 25 minutes when the product is in Stop mode, the product will turn off.

CD/MP3/CD-R Playback

| IMPORTANT |

✎This product is designed to play the following

audio disc types: CD, CD-R, CD-RW.

1. Insert a disc gently into the disc slot with the disc's label facing up.

2. The disc is played automatically.

• For MP3/WMA file, it may take several

minutes for the product to finish scanning the disc tracks.

• If you play a file with an English title, the

song title will be shown in the display. (Titles in other languages can not be displayed.)

• An English-titled track containing a

special character (@, $, *, etc.) will not be displayed.

Track Indicator

Playtime Indicator

12 English

3. To adjust the volume:

• Turn the VOLUME control on the product.

• Press the VOL+ or VOL- button on the

remote control. The volume level can be adjusted in 31 steps (VOLUME MIN, VOLUME 01 ~ VOLUME 29, and VOLUME MAX).

4. Pausing playback

Main Unit

To pause playback temporarily, press the button. Press again to continue playing the disc. Remote control To pause playback temporarily, press the button. Press the button to continue playing the disc.

5. To end playing, press the

| NOTES |

✎If no CD is in the disc slot, "NO DISC" appears

on the display.

✎The quality of MP3/CD-R playback may vary

depending on the condition of the disc or the condition of the recorder used to create the disc.

✎If a disc contains different types of files or

unnecessary folders, you will have problems with playback.

✎Gently insert a CD into the disc slot. Do not

apply excessive force.

- Do not apply force to the product or place a heavy object on the product.

- Do not insert an out-of-spec or oddly shaped CD (heart shaped, octangular, etc.). You can damage the product.

- Carefully maintain your CDs.

button.

Selecting a Track

You can select a desired track while the disc is being played.

To play the previous track

Press the 1 button within 3 seconds after the current track has started playing.

Press the 1 button twice, 3 seconds or more after the current track starts playing.

To play the next track

Press the 2 button.

To play the current track from the beginning

Press the 1 button, 3 seconds after the current track started playing.

To play the track of your choice

Press the 1 or 2 button to move to a desired track.

Searching for a Specific Music Passage on a CD

When listening to a CD, you can quickly search for a specific music passage on a track.

Forward Search ....................

Backward Search .................

You can also press and hold the 1, 2 buttons on the product to automatically scan for a track.

3 4

Repeat One or All Tracks on a CD

You can play a CD or tracks on a CD repeatedly.

1. Press the REPEAT button on the remote control. Each time you press this button, the mode changes as follows:

MP3 : OFF ; TRACK ; DIR ; ALL ; RANDOM CD : OFF ; TRACK ; ALL ; RANDOM

03 Functions

13 English

Functions

2. When you want to stop the repeat function, press the REPEAT button until "OFF" is displayed.

• OFF : Cancels repeat playback.

• TRACK : Repeatedly plays the selected

track.

• DIR (DIRECTORY) : Repeatedly plays all

tracks in the selected folder.

• ALL : Repeatedly plays the entire disc.

• RANDOM : Plays tracks in random order.

Playing USB Devices

Connect an external storage device such as a USB flash memory or external HDD (Hard Disk Drive) to the product. You can play files in MP3/ WMA format.

USB Device Playback

1. Connect the external USB storage device to

your product.

2. Select the USB mode by pressing the USB button on the product or the USB button on the remote control.

3. The first file of the first directory plays automatically.

4. To stop playing Press the

| NOTES |

✎To remove the USB device

- If you press the

| IMPORTANT |

✎Do not connect a USB recharger to the USB

port of this product. You can damage the product.

button to stop playing.

remove the USB device safely.

button again, you can

To Select a File from a USB Device

You can select an MP3 file while the product is playing.

| NOTES |

✎If you want to move to the previous/next track,

press the 1, 2 buttons briefly.

- The unit moves to the previous/next track within the directory.

- If you press the 1, 2 buttons more times than the number of the files in the directory, the unit moves to the next directory.

To repeat

1. Press the REPEAT button.

Each time you press this button, the mode changes as follows:

;

OFF

TRACK ; DIR ; ALL ; RANDOM

2. When you want to stop the repeat function,

press the REPEAT button until "OFF" is displayed.

• OFF : Cancels repeat playback.

• TRACK : Repeatedly plays the selected

file.

• DIR (DIRECTORY) : Repeatedly plays all files in the selected folder.

• ALL : Repeatedly plays all files.

• RANDOM : Plays files in random order.

| NOTES |

✎If the file selected to be played is located in a

folder all the files within that folder are played in random order. If the file selected is located in the root folder all files will be played in random order.

14 English

To Use High Speed Search

You can search a desired section quickly while the product is playing.

Press the

• Each time you press the button, you move

| IMPORTANT |

3, 4

button.

through the section forward/backward quickly.

✎The product does not output sound during a

high speed search.

✎You can also press and hold the

button on the main unit to automatically scan for a track.

or 2

To Delete a File

You can delete a ﬁle from your USB device.

1. Select a file you want to delete.

2. Press the DELETE button on the remote control. "DELETE NO" is displayed.

3. Press the DELETE button on the remote control and "DELETE YES" is displayed.

4. Press the

appears and deletion is completed.

button. "DELETE END"

To Move to the Next/Previous Folder

Press the TUNING/ALBUM , / . button on the remote control to move to the previous/next folder.

| NOTES |

✎When sound files are stored in the root

directory rather than in a folder, press the TUNING/ALBUM , / . button to go to the first TRACK.

To safely remove a USB device

1. Press the 5 button twice while the USB is

playing or press the 5 button once when play has stopped.

2. When the REMOVE message appears on the display, remove the USB device.

Read Before Connecting USB Storage Devices

• Some USB devices may not work properly with this product.

• This product only supports external HDD's that are formatted in the FAT file system.

• USB 2.0 HDDs should be connected to a separate power source. Otherwise, the USB 2.0 HDDs will not work.

• If multiple USB external storage are connected together, only the MP3 files in the first HDD will be played.

• Files with Digital Rights Management (DRM) are not supported. DRM restricts unauthorized access to a DRM file so that file is protected from piracy.

• Even if a file has an .mp3 extension, the file cannot be played if it is formatted in MPEG layer 1 or 2.

• Do not use an unrecognized USB hub.

• Only the first 15 characters of an audio file name

are shown on the product's display.

• Only removable HDDs with less than 160GB are supported. Depending on the device, a 160GBor more removable HDD may not be supported.

• It can take several minutes for the product to recognize the files on some USB devices.

• Some USB devices (USB HDDs, in particular) may cause a delay when moving from track to track.

• With USB storage devices supporting USB VER1.1 only, the product may access files slowly or may not recognize the file properties.

• The maximum electrical current provided by each USB port to connected USB devices is

0.5A (based on DC 5V).

• If there is no USB connection or STOP mode lasts for more than 25 minutes, the product will automatically turn off.

• Some USB devices, digital cameras, USB card readers, iPods, iPhones, and Smart Phones may not be supported.

03 Functions

15 English

Functions

Searching for a Track Quickly

You can select a track directly without the 1, 2 button.

CDDA/MP3-CD/USB

1. Press the SEARCH button.

After pressing the SEARCH button, turn the VOLUME/SEARCH JOG control on the product to the left or right to select a desired track.

• You can move to the selected track directly.

2. When searching is done, the track will automatically start playing.

Using the Program Function

This function is not available during playback of an MP3-CD/USB.

• You can program the playback order of up to 99

tracks of your choice.

• However, you must stop playing the CD/USB

before selecting tracks.

1. While in CD/USB playback mode, press the

button to stop playing the CD/USB.

2. Press the PROGRAM button to display the message below:

PROG 01 TRACK---

(01= program number, ---= track number)

3. Use the 1 or 2 button or the VOLUME/ SEARCH JOG to move to a desired track.

• Press 1 to move to the previous track.

• Press 2 to move to the next track.

4. Press the selection. The selection is stored and

5. To select another track, follow Steps 3 and 4 above.

6. Press the tracks.

7. Press the programmed tracks, Press the 5 button again to cancel playing the programmed tracks.

button to confirm your

is displayed.

button to play the programmed

button to stop playing the

• If you eject the disc, CD programming is cancelled. If you turn off the product, CD/USB programming is cancelled.

| NOTES |

✎CD/USB program play will continue if you try to

switch to another mode.

✎USB REC, DELETE and TUNING/ALBUM

buttons will not work in Program mode. If you press such buttons in Program mode, “PROGRAM PLAY” will be displayed instead.

✎If a file in the program to be played was not in

a supported format, playback skips to the next file automatically.

Viewing or Editing Programmed Tracks

You can view and edit a list of programmed tracks.

1. If a programmed track is being played, press

button once.

the

2. Press the PROGRAM button twice to display the message below:

SAVED 01 TRACK002

(01= program number, 002= track number)

3. Repeatedly press the desired track is displayed.

4. Press the 1 or 2 button to select a different track.

5. Press the selection.

6. To play the programmed tracks, press the button.

button to confirm your

To repeat

1. Press the REPEAT button.

Each time you press this button, the mode changes as follows:

;

OFF

button until the

TRACK ; ALL

16 English

Bluetooth

You can use a Bluetooth device to enjoy music with high quality stereo sound, all without wires!

What is Bluetooth?

Bluetooth is a technology that enables Bluetooth compliant devices to interconnect easily with each other using a short, wireless connection.

• A Bluetooth device may cause noise or malfunction, depending on usage, when:

- A part of your body is in contact with the receiving/transmitting system of the Bluetooth device or the Hi-Fi Component.

- It is subject to electrical variation from obstructions caused by a wall, corner, or office partitioning.

- It is exposed to electrical interference from same frequency-band devices including medical equipment, microwave ovens, and wireless LANs.

• Pair the Hi-Fi Component with the Bluetooth device while they are close together.

• The greater the distance between the HiFi Component and the Bluetooth device, the worse the quality. If the distance exceeds the Bluetooth operational range, the connection is lost.

• In poor reception areas, the Bluetooth connection may not work properly.

• The Bluetooth connection only works when the Bluetooth device and the Hi-Fi Component are close together. The connection will be automatically cut off if the Bluetooth device is out of range. Even within range, the sound quality may be degraded by obstacles such as walls or doors.

• This wireless device may cause electric interference during its operation.

To connect the Hi-Fi Component to a Bluetooth device

Before you begin, confirm that your Bluetooth device supports the Bluetooth-compliant stereo headset function.

1. Press the CD/Bluetooth button of the HiFi Component to display the BLUETOOTH message.

• You will see WAIT for a short period of time

and then READY on the front display of the Hi-Fi Component.

2. Select the Bluetooth menu on the Bluetooth device you want to connect. (Refer to the Bluetooth device's user manual.)

3. Select the Stereo headset menu on the Bluetooth device.

• You will see a list of scanned devices.

4. Select "[Samsung] HI-FI XXXXXX" from the list.

• When the product is connected to

the Bluetooth device, it will display CONNECTED front display.

• If the Bluetooth device has failed to pair

with the product, delete the previous "[Samsung] HI-FI XXXXXX" found by the Bluetooth device and have it search for the product again.

5. You can listen to the music playing on the connected Bluetooth device over the Hi-Fi Component system.

• In Bluetooth mode, some model's Play/

Stop/Next/Back functions are not available.

| NOTES |

The product only supports Middle Quality SBC data (up to 237kbps@48kHz), and does not support High Quality SBC data (328kbps@44.1kHz).

✎The AVRCP feature is not supported. ✎Connect only to a Bluetooth device that

supports the A2DP (AV) function.

✎You cannot connect to a Bluetooth device that

supports only the HF (Hands Free) function.

;

BLUETOOTH on the

03 Functions

17 English

Functions

✎Only one Bluetooth device can be paired at a

time.

✎Once you have turned off the Hi-Fi Component

and the pairing is disconnected, the pairing will not be restored automatically. To reconnect, you must pair the device again.

✎The Hi-Fi Component system may not search

or connect properly in the following cases:

- If there is a strong electrical field around the Hi-Fi Component.

- If several Bluetooth devices are simultaneously paired with Hi-Fi Component.

- If the Bluetooth device is turned off, not in place, or malfunctions.

- Note that such devices as microwave ovens, wireless LAN adaptors, fluorescent lights, and gas stoves use the same frequency range as the Bluetooth device, which can cause electric interference.

To disconnect the Bluetooth device from the Hi-Fi Component

You can disconnect the Bluetooth device from the Hi-Fi Component. For instructions, see the Bluetooth device's user manual.

• The Hi-Fi Component will be disconnected.

• When the Hi-Fi Component is disconnected

from the Bluetooth device, the Hi-Fi Component displays DISCONNECTED display.

;

READY on its

To disconnect the Hi-Fi Component from the Bluetooth device

Press another mode button on the front panel of the Hi-Fi Component to switch from Bluetooth mode to another mode or turn off the Hi-Fi Component. The currently connected device is disconnected.

| NOTES |

✎The connected Bluetooth device will wait a

certain amount of time for a response from the Hi-Fi Component before terminating the connection. (Disconnection time may differ, depending on the Bluetooth device)

✎In Bluetooth connection mode, the Bluetooth

connection will be lost if the distance between the Hi-Fi Component and the Bluetooth device exceeds 16.25 feet (5 meters).

✎If the Bluetooth device comes back into the

effective range after disconnecting, you can restart the Hi-Fi Component to restore the pairing with the Bluetooth device.

✎The Hi-Fi Component automatically turns off

after 25 minutes in the Ready mode.

✎When a Bluetooth device is connected to the

Hi-Fi Component system, the Hi-Fi Component System automatically switches to the Bluetooth mode if it was in a different mode.

Using Bluetooth Power On

When the product is turned off, you can connect your smart device to the product via a Bluetooth connection to turn it on.

1. Press and hold the Bluetooth button on the remote to set the Bluetooth Power On function On. Bluetooth Power On appears on the display.

2. When the product is off, connect your smart device to the product via Bluetooth. (For information on Bluetooth connections, refer to your smart device's manual.)

3. When the connection is complete, the product turns itself on automatically in Bluetooth mode.

• Select the desired music to play from your

smart device.

| NOTES |

✎Press and hold the Bluetooth button on the

remote control to turn the Bluetooth Power On function on or off. Each time you press and hold this button, the Hi-Fi Component displays Bluetooth Power

;

Off on its display.

18 English

TV SoundConnect

You can listen to the sound from your SoundConnect Compatible Samsung TV through the Hi-Fi Component by using the TV SoundConnect function.

To connect the Hi-Fi Component to a SoundConnect Compatible Samsung TV

Before activating this function, be sure to set the Samsung TV's SoundConnect or SoundShare function to On.

1. Press the TV SoundConnect button of the Hi-Fi Component to display the TV SOUNDCONNECT message.

;

SEARCH ; REQUEST

WAIT

2. Set Add New Device to On in the TV's

SoundConnect Settings menu. (Refer to the TV's user manual for details.)

3. When the Hi-Fi Component is connected to the TV, it will display [TV] Name

CONNECTED on the front display.

4. The audio from the connected TV plays over

the Hi-Fi Component system.

| NOTES |

✎The SoundConnect feature is available on some

Samsung TVs released since 2012. Check whether your TV supports the SoundShare or SoundConnect function. (For further details, refer to the TV's user's manual.)

✎If you unplug the Hi-Fi Component, the TV

SoundConnect connection is terminated. To re-establish the connection, plug the Hi-Fi Component into an outlet, and then set the TV SoundConnect connection again.

;

✎Only one Hi-Fi Component can be connected

to a TV via TV SoundConnect.

✎To connect to another TV in TV SoundConnect

at time, press the seconds, and then connect to the other TV by following the directions above.

button for more than 5

To disconnect the TV from the Hi-Fi Component

You can disconnect the TV from Hi- Fi Component. For instructions, see the TV's user manual.

• When the Hi-Fi Component is disconnected from the TV, the Hi-Fi Component displays

DISCONNECTED

;

REQUEST on its display.

To disconnect the Hi-Fi Component from the TV

Press another mode button on the front panel of the Hi-Fi Component to switch from TV SoundConnect mode to another mode or turn off the Hi-Fi Component. The currently connected device is disconnected.

| NOTES |

✎The connected TV will wait a certain amount

of time for a response from the Hi-Fi Component before terminating the connection. (Disconnection time may differ, depending on the TV)

✎The connection may be lost or sound may

stutter if the distance between the TV and the Hi-Fi Component exceeds 6.5 feet (2 m).

✎Instability in the network environment may

cause the connection to be lost or sound to stutter.

✎The Hi-Fi Component automatically turns off

after 25 minutes if it is not connected to a TV.

03 Functions

19 English

Functions

Using My Karaoke

You can use the MY Karaoke function to sing along with your favorite CDs and USB tracks.

1. Connect the microphone to the MIC jack on the front of the product.

• If your microphone plug is larger than the

3.5 mm MIC jack, you need a ConnectorAdaptor (not supplied) to complete the connection.

- First, connect the Connector-Adaptor to the MIC jack on the front of the product,

- Second, connect the microphone (with larger jack) to the Connector-Adaptor.

2. Press the MIC VOL-, + button on the remote control to adjust the volume of the microphone.

3. Press the MY KARAOKE button on the remote control to suppress the vocal if you need to. Each time you press the button, the selection changes as follows:

MY KARAOKE ON

• If you hear strange noises (squealing or

howling) while using the Karaoke feature, move the microphone away from the speakers. Turning down the microphone's volume or the speaker volume is also effective. Do not aim the MICROPHONE towards the SPEAKERS.

• The microphone does not operate in the

AUX and TUNER mode.

• If you connect a microphone, GIGA

SOUND automatically turns off. To turn Giga Sound back on you must remove the microphone, and then press the GIGA SOUND BEAT button.

• When My Karaoke is on, GIGA SOUND

does not work.

• When you turn My Karaoke off, all My

Karaoke settings are lost.

• My Karaoke is only available when a

microphone is connected to the Hi-Fi Component.

• My Karaoke does not operate in the

Bluetooth, TV SoundConnect, FM and AUX mode.

;

MY KARAOKE OFF

Auto Change Function

You can circularly play between the disc and the USB.

1. Press the AUTO CHANGE button to select a mode and press

• If Program Play has not been set in CD/

USB

AUTO CHANGE OFF

• If Program Play has been set in CD/USB

AUTO CHANGE OFF

AUTO CHANGE PROGRAM

• When the AUTO CHANGE mode is "ALL",

- the music will be played on DISC

USB1 ; USB2 continuously.

- if you press the POWER button, function change button or the EJECT button, the AUTO CHANGE function automatically switches to "OFF" mode.

- the recording can't work.

- the REPEAT function can't work and automatically changes to OFF.

- the REC SPEED, USB REC button can't work.

• When USB is playing, if you disconnected the USB, the AUTO CHANGE function automatically switches to "OFF" mode.

• If there's no USB1, it will jump to USB2.

to apply your selection.

;

AUTO CHANGE ALL

;

AUTO CHANGE ALL ;

;

Listening to the Radio

To Store the Stations You Want

You can store up to: 15 FM stations.

1. Select FM by pressing the TUNER/AUX button.

2. To search for a station, press the TUNING MODE button on the remote control or the

button on the product one or more times until MANUAL is displayed.

20 English

3. Find a station by:

• Pressing and holding the TUNING/ALBUM or . button on the remote control

to automatically search for broadcasting stations.

4. Press the MO/ST button to switch between stereo and mono.

• In a poor reception area, select MONO for

a clear, interference-free broadcast.

• This applies only when listening to an FM

station.

5. If you do not want to store the radio station found, go back to Step 3 and search for another station.

Otherwise: a. Press the

b. Or, press the TUNING/ALBUM button

on the remote control to select a program number in the PRESET mode.

c. Press the

6. To store other radio frequencies, repeat Steps 3 to 5.

button.

button to save the preset.

Selecting a Stored Station

To listen to a stored station, follow these steps:

1. Select FM by pressing the TUNER/AUX button on the product or remote control.

2. Press the TUNING MODE button on the remote control until "PRESET" is displayed.

3. Press the 1, 2 buttons on the main unit or the TUNING/ALBUM ,, . buttons on the remote control to select a preset number.

Timer Function

Setting the Clock

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1. Press the TIMER SET button on the remote control twice. "CLOCK SET" is displayed.

2. Press the ¬ button on the remote control. The hour flashes.

•

To increase the hours: TUNING/ALBUM

•

To decrease the hours: TUNING/ALBUM

3. When the correct hour is displayed, press the

button, and then the minutes flash.

•

To increase the minutes: TUNING/ALBUM

•

To decrease the minutes: TUNING/ALBUM

4. When the correct minute is displayed, press

the ¬ button. "TIMER PLAY SET" appears in the display.

, .

Setting the Timer

The timer enables you to set the product to switch on or off at specific times automatically.

• Before setting the timer, check that the current

time is correct.

• For each step, you have a few seconds to set

the required options. If you exceed this time, you must start again.

• If you no longer want the product to be switched

on or off automatically, you must cancel the timer by pressing the TIMER ON/OFF button.

Example: You want to wake up to music every morning.

1. Press the TIMER SET button until TIMER PLAY SET is displayed.

2. Press the ¬ button.

Result: ON TIME is displayed for a few seconds. You can set the timer switch-on time.

03 Functions

21 English

Functions

3. Set the timer switch-on time. a. Press the TUNING/ALBUM , or .

button to set the hours.

b. Press the ¬ button.

Result: The minutes flash.

c. Press the TUNING/ALBUM , or .

button to set the minutes.

d. Press the ¬ button.

Result: OFF TIME is displayed for a few seconds. You can now set the timer switch-off time.

4. Set the timer switch-off time. a. Press the TUNING/ALBUM , or .

button to set the hours.

b. Press the ¬ button.

Result: The minutes flash.

c. Press the TUNING/ALBUM , or .

button to set the minutes.

d. Press the ¬ button.

Result: VOLUME XX is displayed, where XX corresponds to the volume already set.

5. Press the TUNING/ALBUM , or . button to adjust the volume level and press the ¬ button. Result: The source to be selected is displayed.

6. Press the TUNING/ALBUM , or . button to select the source the Hi-Fi Component will play when it switches on.

If you select You must also FM (radio) a. Press the ¬ button.

b. Select a preset station

by pressing the TUNING/ALBUM , or . button.

CD (compact disc)

USB Connect a USB device.

Load a compact disc.

7. Press the ¬ button. Result: TIMER REC SET (Do you want to record?) is displayed.

8. Press the ¬ button. Result: REC SET YES/NO is displayed. You can press the TUNING/ALBUM , or . button to select REC YES or REC NO, and then press

1) If you select REC NO, it will cancel tuner

2) If you select REC YES, you can set the

| NOTES |

✎Tuner timer recording On/Off times can differ

from Timer On/Off times.

✎If the timer switch on and off times are identical,

the word ERROR is displayed.

✎You can use the 1, 2 buttons on the

product instead of the TUNING/ALBUM , or . button to make adjustments in Steps 3 through 8.

✎If the switch-on or -off time is the same as the

timer recording time, only the switch-on or -off time is effective, and the timer recording is not applied.

✎When you use the auto timer, you may need

an additional step to use a CD or USB device with it, depending on the disc (or device). Consequently, it is easier to use the tuner instead.

✎If you select CD or USB mode when there

is no disc or no USB in the product, it will automatically change to TUNER.

button.

timer recording and any currently set tuner timer recording. Note that selecting REC NO does not cancel the Timer setting.

tuner timer recording on and off times. a. Press the ¬ button.

Result: ON TIME is displayed for a few seconds. You can set the tuner timer recording switch-on time.

b. Press the ¬ button.

Result: OFF TIME is displayed for a few seconds. You can set the tuner timer recording switch-off time.

22 English

Cancelling the Timer

After you have set the timer, it will start automatically. When it starts, the TIMER ON message appears on the display. If you no longer want to use the timer, you must cancel it.

• To cancel the timer, Press the TIMER ON/OFF button once.

• To restart the timer, Press the TIMER ON/OFF button once again.

| NOTES |

✎When you select the TIMER OFF mode, the

TIMER RECORDING and TIME function are not available.

The Recording Function

Basic Recording

You can record from a CD, a USB device, a radio broadcast, or an external source to a USB storage device.

1. Connect an external USB storage device to

a USB ( can use USB 2.

2. Play a disc or USB, turn on the radio and

select a station, or connect an external source to your product as described below.

• Press the CD button on the product to select the CD function.

• Insert a CD gently into the disc slot.

• Use the CD selection (1 or 2) buttons to

select the desired song.

TUNER

• Select FM by pressing the TUNER/AUX button.

• Select the radio frequency you want to record.

) jack on your product. You

USB 1 (Recording device is on USB 2)

• Connect the USB device with the files you want to record to USB 1 jack.

• Press the USB button to select USB 1.

• Play a song from the USB 1.

External Source

• Connect an External device/MP3 player to the product.

• Press the TUNER/AUX button to select AUX IN 1 or AUX IN 2.

• Play a song from the external device.

3. Press the USB REC button on the remote control to start recording.

• CD recording starts and "TRACK RECORD"

and the current track number appear on the display alternately.

• If you want to record all the tracks on the

disc, press and hold the USB REC button. "FULL CD RECORD" is displayed.

RADIO

• "TUNER RECORD" is displayed and

recording starts.

CD-ROM/USB

• "FILE COPY" is displayed and recording

starts.

• You can also copy a folder containing MP3/

WMA files to a device on USB 2. Press and hold the USB REC button while the system plays an MP3 or WMA file located in a folder. Your system displays "FOLDER COPY", and will record all the files in that folder.

• When the recording is done, "STOP" is

displayed.

• If there is a file with the same name on the

USB 2 device, "EXIST FILE" is displayed, and the function is canceled.

03 Functions

23 English

Functions

• If a microphone is connected to the product and you press the USB REC button, you activate the MP3 Recording function, not the Copy function.

• Press the USB REC button for a second to start FILE COPY. Press and hold the USB REC button for a few seconds to start FOLDER COPY.

External Source

• "AUX RECORD" is displayed and recording starts.

CD/USB1(MP3) & MIC

• "MP3 RECORD" is displayed and recording starts.

4. To stop recording, press the 5 button. The recording is automatically saved as an MP3 file.

5. After the recording is finished, a directory named "RECORDING"(CD-DA), "COPY" (CDROM/USB), "TUNER RECORDING", "AUX RECORDING" or "MP3 RECORDING" is created in your device.

| NOTES |

✎WMA/MP2 files can only be copied not

recorded.

✎Do not disconnect the USB device or the AC

Cord during recording. You can cause file damage.

✎If you disconnected the USB device during

recording, the product will turn off and you will not be able to delete the file that has been recorded. If this occurs, connect the USB device to a PC, back up the USB data to the PC, and then reformat the USB device.

✎If the USB device does not have enough

memory, "NOT ENOUGH MEMORY" will appear on the display.

✎The Recording function supports the FAT file

systems only. The NTFS file system is not supported.

✎When you use the CD high speed search

function, the CD recording function is unavailable.

✎With some USB devices, recording time may

be longer.

✎In the Program mode, you can't use the

recording function.

✎When the Recording function is active, the EQ

and GIGA SOUND functions automatically turn off and are unavailable.

✎During a CD recording, the REPEAT function

automatically turns off and is unavailable.

✎If you use the MIC function during a CD

recording, the voice from the microphone will be recorded.

✎You can not record audio from the radio

when searching for a station or if there are no frequencies available when the product is set to Tuner mode.

✎Note that setting the input level too loud when

recording music from an external device through the AUX or USB channel may introduce noise into the recording. If this occurs, lower the external device's volume level.

Recording Speed

Each time you press the REC SPEED button on the remote control, the recording speed will change as follows:

;

RECORD SPEED x 1

• When you record from the tuner or an external source, you cannot change the recording speed.

• If you select RECORD SPEED X 4, sound is not produced during the recording.

• If you connect the microphone, you have one recording speed mode available: RECORD SPEED X 1.

• During recording, if you disconnect the microphone, the recording will stop. If you reconnect the microphone, the recording will not restart.

| NOTES |

✎Even when RECORD SPEED x4 is set,

recording may not be made in x4 speed depending on the used USB storage device.

RECORD SPEED x 4

24 English

Special Sound Effects

Selecting EQ Mode

Your Hi-Fi Component system provides predefined equalizer settings that are optimized for particular music genre. You can also adjust the bass, middle, and treble levels manually.

1. Press the EQ button. Each time you press the EQ button or turn the VOLUME/SEARCH JOG control on the product, the mode changes as follows:

;

OFF

FLAT ; RANCHERA ; CUMBIA

;

REGGAE ; MERENGUE ; SALSA ;

REGGATON

;

HIP-HOP ; ROCK ; JAZZ ; CLASSIC ;

ELEC-TRONIC ; MP3 ENHANCER ; VIRTUAL

2. To set the BASS, MID (Middle), and TREB

(Treble) levels manually, select USER EQ, and then press the ¬ button.

Result: The BASS level (left numeric) flashes. Press the 1 or 2 button on the product or TUNING/ALBUM ,, . button to select a level from -06 to 06. Then, press the ¬ button.

Result: The MIDDLE level (middle numeric) flashes. Press the 1 or 2 button on the product or TUNING/ALBUM ,, . button to select a level from -06 to 06. Then, press the ¬ button.

Result: The TREBLE level (right numeric) flashes. Press the 1 or 2 button on the product or TUNING/ALBUM ,, . button to select a level from -06 to 06. Then, press the ¬ button.

Result: Setting is complete.

;

FOLKLORE ; PARTY ; POP

;

SOUND

USER EQ

| NOTES |

✎When the Hi-Fi Component is recording, the

EQ function is turned off automatically and is unavailable.

✎If no buttons are pressed within 8 seconds,

your settings will automatically be cancelled and the previous settings will be saved.

✎The EQ mode may be different depending on

your region.

✎Use the VOLUME/SEARCH JOG to alter the

EQ mode, and the selected EQ mode will be applied after 2 seconds.

✎Use the VOLUME/SEARCH JOG to alter

the EQ mode and press disappears.

. EQ screen

FOOTBALL MODE function

The football mode brings greater realism to sports broadcasts.

1. Press the FOOTBALL MODE button on the product. Each time you press this button, the mode changes as follows:

;

ANNOUNCER ; STADIUM

OFF

2. To cancel this function, press the FOOTBALL MODE button until "OFF" is displayed.

GOAL Function

Press this button to add the sound of cheering while watching a football game.

1. Press the GOAL button on the remote control. Each time you press this button, the mode changes as follows:

;

GOAL ON

2. To cancel this function, press the GOAL button until "GOAL OFF" is displayed.

GOAL OFF

03 Functions

25 English

Functions

| NOTES |

✎Press the GOAL button to output the currently

playing sound file mixed with the GOAL sound.

GIGA SOUND Function

The GIGA SOUND function amplifies the bass sound and provides twice the bass for powerful, realistic sound.

1. Press the GIGA SOUND BEAT button on the main unit or the GIGA button on the remote control. Each time you press this button, the mode changes as follows:

;

GIGA SOUND BEAT

2. To cancel this function, press the GIGA SOUND BEAT button until "GIGA SOUND OFF" is displayed.

| NOTES |

✎The GIGA SOUND mode may be different

depending on your region.

GIGA SOUND OFF

BEAT WAVING Function

The Beat Waving function lets you change the Speaker LED display mode.

1. Press the BEAT WAVING button on the product or on the remote control. Each time you press this button, the mode changes as follows:

STARDUST ; EMERALD MOON ; SOLAR

BOMB ; SHOOTING STAR ; STAR ;

PARTY 1 ; PARTY 2 ; FUN 1 ; FUN 2 ;

PURE ; FRESH ; LOVE ; JOY ; SUNSET ;

SUNRISE ; NATURE 1 ; NATURE 2 ; WAVE 1

;

WAVE 2 ; AURORA ; OFF

| NOTES |

✎If you select BEAT WAVING OFF, all the

speaker LED displays are turned off.

DJ BEAT Function

The DJ Beat function lets you turn on the DJ Beat sound effect functions. The level of each effect is adjustable.

Press the DJ BEAT button on the remote control or on the product. Each time you press this button, the mode changes as follows:

| IMPORTANT |

✎

You can set each of the DJ Beat functions from

-15 to +15. The initial setting for all functions is 0.

• FLANGER : Creates an effect similar to the sound of a jet engine revving up and down.

• CHORUS : Creates an effect similar to a singing chorus.

• WAHWAH : Creates a 'Wah~ Wah~' effect.

• TREMOLO : Repeatedly and rapidly turns the

volume up and down.

• FUZZ : Distorts the original sound to make it harder and harsher.

• PHASER : Alters the original sound from clear to dull.

• SLAPBACK : Creates the effect of a slapback echo following the original sound.

• DJ BEAT OFF : Turns off this function.

| NOTES |

✎The red LED turns on around the button you

pushed and around the DJ BEAT button.

✎You can control the intensity of the effect with

the Volume Jog. To control the volume, press the product's VOLUME/DJ button.

✎To cancel an effect, press the effect's button

again.

✎You can also control the effect using the

EFFECT LEVEL button on the remote control.

✎Use the Volume Jog to control the intensity of

the effect that was activated last. For example, if you activated the WahWah effect and then the Panning effect, the Volume Jog will control the Panning effect.

✎To control the intensity of the effect you applied

first, press the button of effect that you applied last to turn it off. Then, you can use the Volume Jog to control the intensity of the first effect.

26 English

+PANNING Funcion

Increases the left and right speaker's output in turn and makes it seem as if the sound is moving from side to side.

| NOTES |

✎To apply the PANNING effect to another effect,

press the +PANNING button when the other effect is active or press another effect button when the PANNING effect is active.

NON-STOP MUSIC RELAY Function

The NON-STOP MUSIC RELAY function plays music continuously without an interval between tracks/files. If there were two mp3 files, it skips to the next file's 10 seconds from the start position when the previous track reaches its10 seconds before the end position.

Press the NON-STOP MUSIC RELAY button on the product or NON-STOP RELAY button on the remote control.

Each time you press this button, the mode changes as follows:

;

NON-STOP RELAY ON

| NOTES |

✎This function is only available during playback

of a CD/USB.

NON-STOP RELAY

OFF

DANCE TIME Function

Press the DANCE TIME button on the remote control when playing music to play the dance music stored in the product.

Use this function to enjoy exciting music.

1. Press the DANCE TIME button on the remote control. Each time you press this button, the mode changes as follows:

DANCE TIME ON

2. To cancel this function, press the DANCE TIME button until "DANCE TIME OFF" is

displayed.

;

DANCE TIME OFF

| NOTES |

✎When the DANCE TIME sound file finishes

playing, the DANCE TIME mode changes to DANCE TIME OFF.

✎When DANCE TIME mode is swithed ON, the

B/T, TV SoundConnect, TUNER, and AUX sources enter Mute mode. The music that is currently playing is paused.

✎When you turn off DANCE TIME, any CD or

USB whose playback had been paused when you started DANCE TIME, resumes from the beginning of the track that had been playing.

✎When playing a DANCE TIME sound file, you

can change the dance music by pressing the

button.

1, 2

TEMPO Function

Use this to change the TEMPO while music is playing.

1. During playback (CDDA/ MP3/ WMA), press the TEMPO button on the remote control.

2. Select the desired TEMPO by using the EFFECT LEVEL button on the remote

control.

| NOTES |

✎TEMPO Function does not operate in the

Bluetooth, TV SoundConnect, FM and AUX mode.

✎When you turn TEMPO off, all TEMPO settings

are lost.

Booting Sound Function

When the Booting Sound Function is on, your Hi-fi Component demonstrates it's audio prowess as it boots up.

1. Press the product's GIGA SOUND BEAT button or the remote control's GIGA button for 5 seconds. The BOOTING SOUND menu appears on the display panel.

2. Press the product's GIGA SOUND BEAT button or the remote control's GIGA button for 5 seconds to turn the BOOTING SOUND function On or Off.

03 Functions

27 English

Appendix

Troubleshooting

Refer to the chart below when this product does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Center.

Symptom Check/Remedy

I cannot eject the disc. • Is the power cord plugged securely into the outlet?

• Turn off the power and then turn it back on.

Playback does not start immediately when the Play/Pause button is pressed.

Sound is not produced. • No sound is heard during fast playback, slow playback, and

The remote control does not work. •Is the remote control being operated within its operational

The product is not working. (Example: The power goes out or the front panel buttons don't work, or you hear a strange noise.)

The product is not working normally.

Can't receive radio broadcast. • Is the antenna connected properly?

Turn off automatically after displaying "PROTECT"

• Are you using a deformed disc or a disc with scratches on the surface?

• Wipe the disc clean.

step motion playback.

• Are the speakers connected properly? Is the speaker setup correctly customized?

• Is the disc severely damaged?

angle and distance range?

• Are the batteries drained?

• Press the

with no disc inside. The initialization message appears on the screen, and the power will turn off automatically. When you turn your product on again, all the settings will be reset. Don't use this unless absolutely necessary.

• If the antenna's input signal is weak, install an external FM antenna in an area with good reception.

• Check the power in use is within the range of the power which specified on the rear label of the product.

• If "Voltage Selector" is on the rear panel, check the power is same with the voltage that you set manually.

button (on front panel) for more than 5 seconds

28 English

Specifications

Weight

General

FM Tuner

CD Disc

Amplifier

*: Nominal specification

- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.

- Weight and dimensions are approximate.

- Design and speciﬁcations are subject to change without prior notice.

- For information on the power supply and power consumption, refer to the label attached to the product.

Dimensions

Operating Temperature Range

Operating Humidity Range 10 % to 75 % Signal/Noise ratio 55 dB Usable sensitivity 10 dB Total harmonic distortion 1 %

CD : 12 cm (COMPACT DISC)

Front speaker output 575W/CH (4Ω) Subwoofer output 575W/CH (4Ω) Frequency range 22Hz~20KHz S/N Ratio 65 dB Channel separation 60 dB Input sensitivity AUX IN1 1.2V, AUX IN2 2.0V

Main unit 6.1 Kg Speaker 55.17 Kg Main unit 550 (W) x 212 (H) x 367 (D) mm Speaker 648 (W) x 652 (H) x 440 (D) mm

+5°C~+35°C

Reading Speed : 4.8 ~ 5.6 m/sec. Maximum Play Time : 74 min.

04 Appendix

Open Source Announcement

To send inquiries and requests regarding open sources, contact Samsung via Email (oss.request@ samsung.com).

• Hereby, Samsung Electronics, declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The original Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search Product Support and enter the model name. This equipment may be operated in all EU countries.

29 English

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Area Contact Centre

AUSTRIA

BELGIUM 02-201-24-18

BOSNIA 051 331 999 BULGARIA 07001 33 11 , sharing cost CROATIA 062 726 786 CZECH 800 - SAMSUNG (800-726786) DENMARK 70 70 19 70 FINLAND 030-6227 515 FRANCE 01 48 63 00 00

GERMANY

CYPRUS

GREECE

HUNGARY

ITALIA 800-SAMSUNG (800.7267864) LUXEMBURG 261 03 710 MONTENEGRO 020 405 888

0800 - SAMSUNG (0800 - 7267864)

0180 6 SAMSUNG bzw. 0180 6 7267864* (*0,20 €/Anruf aus dem dt. Festnetz, aus dem Mobilfunk max. 0,60 €/Anruf)

8009 4000 only from landline, toll free

80111-SAMSUNG (80111 726

7864) only from land line (+30) 210 6897691 from mobile and land line

0680SAMSUNG (0680-726-786) 0680PREMIUM (0680-773-648)



Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of

with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.

To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.

Web Site

www.samsung.com/at/support www.samsung.com/be/

support (Dutch) www.samsung.com/be_fr/ support (French)

www.samsung.com/support www.samsung.com/bg/support www.samsung.com/hr/support www.samsung.com/cz/support www.samsung.com/dk/support www.samsung.com/fi/support www.samsung.com/fr/support

www.samsung.com/de/ support

www.samsung.com/gr/ support

http://www.samsung.com/ hu/support

www.samsung.com/it/support www.samsung.com/support www.samsung.com/support

Area Contact Centre

SLOVENIA

NETHERLANDS

NORWAY 815 56480

POLAND

PORTUGAL 808 20 7267

ROMANIA

SERBIA 011 321 6899 SLOVAKIA 0800 - SAMSUNG(0800-726 786) SPAIN 0034902172678 SWEDEN 0771 726 7864 (SAMSUNG)

SWITZERLAND 0848 726 78 64 (0848-SAMSUNG)

U.K 0330 SAMSUNG (7267864) EIRE 0818 717100 LITHUANIA 8-800-77777 LATVIA 8000-7267 ESTONIA 800-7267

080 697 267 090 726 786

0900-SAMSUNG (0900-7267864) (€ 0,10/Min)

0 801-172-678* lub +48 22 60793-33 ** *(całkowity koszt połączenia jak za 1 impuls według taryfy operatora) ** (koszt połączenia według taryfy operatora)

08008 SAMSUNG (08008 726 7864) TOLL FREE No.



Web Site

www.samsung.com/si/ support

www.samsung.com/nl/ support

www.samsung.com/no/support

www.samsung.com/pl/ support

www.samsung.com/pt/support

www.samsung.com/ro/support

www.samsung.com/rs/support www.samsung.com/sk/support www.samsung.com/es/support www.samsung.com/se/support www.samsung.com/ch/

support (German) www.samsung.com/ch_fr/ support (French)

www.samsung.com/uk/support www.samsung.com/ie/support www.samsung.com/lt/support www.samsung.com/lv/support www.samsung.com/ee/support

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.

charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

+ 120 hidden pages