Thank you for purchasing this Samsung
product.
To receive more complete service,
please register your product at
www.samsung.com/register
This Nanum Gothic Eco font is provided by NAVER.
This Nanum Gothic Eco font is provided by NAVER.
Safety Information
Warning
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
WARNING
To reduce the risk of fire or electric shock, do
•
not expose this appliance to rain or moisture.
This product contains chemicals known to
•
the State of California to cause cancer and
reproductive toxicity.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a
CLASS 1 LASER product. Use of controls,
adjustments or performance of procedures
other than those specified herein may result in
hazardous radiation exposure.
Complies with 21CFR 1040.10 except for
deviations pursuant to Laser Notice No. 50,
dated June 24, 2007.
DANGER :
VISIBLE AND INVISIBLE LASER RADIATION
•
WHEN OPEN. AVOID DIRECT EXPOSURE TO
BEAM. (FDA 21 CFR)
CAUTION :
This symbol indicates “dangerous
voltage” inside the product that
presents a risk of electric shock or
personal injury.
This symbol indicates important
instructions accompanying the
product.
CLASS 3B VISIBLE AND INVISIBLE LASER
•
RADIATION WHEN OPEN. AVOID EXPOSURE
TO THE BEAM. (IEC 60825-1)
THIS PRODUCT UTILIZES A LASER. USE
•
OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN THE COVER
AND DO NOT REPAIR YOURSELF. REFER
SERVICING TO QUALIFIED PERSONNEL.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LÁSER CLASE 1
WARNING
TO PREVENT THE SPREAD
•
OF FIRE, KEEP CANDLES
AND OTHER ITEMS WITH OPEN FLAMES
AWAY FROM THIS PRODUCT AT ALL TIMES.
2 English
FCC NOTES (for U.S.A)
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on.
If interference is present, the user is
encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
•
Increase the separation between the
•
equipment and receiver.
Connect this equipment to an outlet that is
•
on a circuit that is different than the circuit
the receiver is connected to.
Consult the dealer or an experienced
•
radio/TV technician for help.
This class B digital product meets all
requirements of the Canadian Interference Causing Equipment Regulations.
Important Safety Instructions
Read these operating instructions carefully
before using the unit. Follow all the safety
instructions listed below. Keep these operating
instructions handy for future reference.
Read these instructions.
1.
Keep these Instructions.
2.
Heed all warnings.
3.
Follow all instructions.
4.
Do not use this apparatus near water.
5.
Clean only with a dry cloth.
6.
Do not block any ventilation openings.
7.
Install in accordance with the
manufacturer's instructions.
Do not install near any heat sources such
8.
as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
Do not defeat the safety purpose of
9.
the polarized or grounding type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third
prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of
the obsolete outlet.
Protect the power cord from being walked
10.
on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
Only use attachment/accessories specified
11.
by the manufacturer.
Use only with the cart,
12.
stand, tripod, bracket,
or table specified by the
manufacturer, or sold
with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
Unplug this apparatus during lightning
13.
storms or when it will be unused for long
periods of time.
Refer all servicing to qualified service
14.
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as when the power-supply cord or
plug is damaged, liquid has been spilled
or objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
01 Safety Information
3 English
Safety Information
Precautions
Ensure that the AC power supply in your
•
house complies with the identification sticker
located on the back of your product.
Install your product horizontally, on a
•
suitable base (furniture), with enough space
around it for ventilation (3 - 4 inches/7.5 10 cm).
Do not place the product on amplifiers or
•
other equipment which may become hot.
Make sure the ventilation slots are not
covered.
Do not stack anything on top of the product.
•
Before moving the product, ensure the Disc
•
Insert Slot is empty.
The mains plug or appliance coupler
•
shall remain readily operable.
To turn off the productcompletely, disconnect
•
the AC plug from the wall outlet. Disconnect
the AC plug from the wall outlet if you will
leave the device unused for a long period of
time.
During thunderstorms, disconnect the AC
•
plug from the wall outlet. Voltage peaks due
to lightning could damage the product.
Do not expose the product to direct sunlight
•
or other heat sources. This could cause the
product to overheat and malfunction.
Protect the product from moisture, and
•
excess heat or equipment creating strong
magnetic or electric fields (i.e. speakers.).
Disconnect the power cable from the AC
•
supply if the product malfunctions.
Your product is not intended for industrial
•
use. It is for personal use only.
Condensation may occur if your product or
•
disc has been stored in cold temperatures. If
transporting the product during the winter,
wait approximately 2 hours until the product
has reached room temperature before using.
The batteries used with this product
•
contain chemicals that are harmful to the
environment. Do not dispose of batteries in
the general household trash.
Place the loudspeakers at a reasonable
•
distance on either side of the system to
ensure good stereo sound.
Direct the loudspeakers towards the listening
•
area.
Do not expose this apparatus to
•
dripping or splashing. Do not place
objects filled with liquids, such as vases,
on the apparatus.
To turn this apparatus off completely,
•
you must disconnect it from the wall
outlet. Consequently, the wall outlet
and power plug must be readily
accessible at all times.
Use only a properly grounded plug and
•
receptacle.
- An improper ground may cause electric
shock or equipment damage. (Class l
Equipment only.)
Disc Storage & Management
Holding Discs
•
- Fingerprints or scratches on a disc may
reduce sound and picture
quality or cause skipping.
- Avoid touching the surface of a disc where
data has been recorded.
- Hold the disc by the edges so that
fingerprints will not get on the surface.
- Do not stick paper or tape on the disc.
Cleaning Discs
•
- If you get fingerprints or dirt
on a disc, clean it with a mild
detergent diluted in water and
wipe with a soft cloth.
- When cleaning, wipe gently from
the inside to the outside of the disc.
Disc Storage
•
`Do not keep in direct sunlight.
`Keep in a cool ventilated area.
`Keep in a clean, protective jacket and
store vertically.
4 English
Condensation may form if warm air comes
•
into contact with cold parts inside the
product. When condensation forms inside
the product, it may not operate correctly.
If this occurs, remove the disc and let the
product stand for 1 or 2 hours with the
power on.
Disc and Format Compatibility
This product does not support Secure (DRM)
Media files.
CD-R Discs
Some CD-R discs may not be playable
•
depending on the disc recording device (CDRecorder or PC) and the condition of the
disc.
Use 650MB/74 minute CD-R discs.
•
Do not use CD-R discs over 700MB/80
minutes as they may not be played back.
Some CD-RW (Rewritable) media may not
•
be playable.
Only CD-Rs that are properly "closed" can be
•
fully played. If the session is closed, but the
disc is left open, you may not be able to fully
play the disc.
MP3-CD Discs
Only CD-R discs with MP3 files in ISO 9660
•
or Joliet format can be played.
MP3 file names should contain no blank
•
spaces or special characters (. / = +).
Use discs recorded with a compression/
•
decompression data rate greater than
128Kbps.
Only a consecutively written multisession disc
•
can be played. If there is a blank segment in
the Multisession disc, the disc can be played
only up to the blank segment.
If the disc is not closed, it will take longer to
•
begin playback and not all of the recorded
files may play.
For files encoded in the Variable Bit Rate
•
(VBR) format,( i.e. files encoded in both
low bit rate and high bit rate - 32Kbps
~ 320Kbps), the sound may skip during
playback.
A maximum of 999 files can be played per
•
CD.
Supported Audio Formats
File
Extension
*.mp3
*.wma
| NOTES |
✎Does not support WMA Professional codec.
Audio
Codec
MPEG 1
Layer3
MPEG 2
Layer3
MPEG 2.5
Layer3
Wave_Format_
MSAudio1
Wave_Format_
MSAudio2
Sampling
Rate
16KHz ~
48KHz
16KHz ~
48KHz
16KHz ~
48KHz
16KHz ~
48KHz
16KHz ~
48KHz
Bit Rate
80Kbps ~
320Kbps
80Kbps ~
320Kbps
80Kbps ~
320Kbps
56Kbps ~
128Kbps
56Kbps ~
128Kbps
01 Safety Information
5 English
Contents
SAFETY INFORMATION
2 Warning
4 Precautions
4 Disc Storage & Management
5 Disc And Format Compatibility
GETTING STARTED
7 Front Panel
8 Rear Panel
9 Remote Control
10 Accessories
10 Connecting the Speakers
10 Attaching the speaker foot
11 Attaching the Toroidal Ferrite Core to the
Cord of the Subwoofer
FUNCTIONS
12 The Display function
12 Playing a CD
12 Loading a Compact Disc
12 CD/MP3/CD-R Playback
13 Selecting a Track
13 Searching for a Specific Music Passage
on a CD
13 Repeat One or All Tracks on a CD
14 Playing USB Devices
14 USB Device Playback
14 To Select a File from a USB Device
15 To Use High Speed Search
15 To Delete a File
15 To Move to the Next/Previous Folder
15 To safely remove a USB device
15 Read Before Connecting USB Storage
Devices
16 Searching for a Track Quickly
16 Using the Program Function
16 Viewing or Editing Programmed Tracks
17 Bluetooth
17 What is Bluetooth?
17 To connect the Hi-Fi Component to a
Bluetooth device
6 English
18 To disconnect the Bluetooth device from
the Hi-Fi Component
18 To disconnect the Hi-Fi Component
from the Bluetooth device
18 Using the Bluetooth Power On
19 TV SoundConnect
19 To connect the Hi-Fi Component to a
SoundConnect Compatible Samsung TV
19 To disconnect the TV from the Hi-Fi
Component
19 To disconnect the Hi-Fi Component
from the TV
20 Using My Karaoke
20 Auto Change Function
20 Listening to the Radio
20 To Store the Stations You Want
21 Selecting a Stored Station
21 Timer Function
21 Setting the Clock
21 Setting the Timer
23 Cancelling the Timer
23 The Recording Function
23 Basic Recording
24 Recording Speed
25 Special Sound Effect
25 Selecting EQ Mode
25 FOOTBALL MODE function
25 GOAL Function
26 GIGA SOUND Function
26 BEAT WAVING Function
26 DJ BEAT Function
27 +PANNING Function
27 NON-STOP MUSIC RELAY Function
27 DANCE TIME Function
27 TEMPO Function
APPENDIX
28 Troubleshooting
29 Specifications
Getting Started
Front Panel
j
i
h
g
f
e
REMOTE CONTROL SENSOR
1
FORWARD SEARCH/SKIP button
2
PLAY/PAUSE button
3
TUNER/AUX button
4
DISPLAY / DEMO button
5
TV SOUND CONNECT button
6
EQ button
7
FOOTBALL MODE button
8
GIGA SOUND BEAT button
9
POWER button
0
Press this button to switch your
•
product on or off.
REPEAT button
!
SEARCH button
@
VOLUME / SEARCH JOG
#
OPEN/CLOSE button
$
ENTER button
%
PROGRAM button
^
DISC slot
&
Display Panel
*
BEAT WAVING button
(
k56c7
l
)
b
143
2m n
*d(
)
a
b
c
d
e
f
g
h
i
j
k
l
m
n
&
MIC jack
AUX IN 1 jack
Connecting an external device such as
an MP3 player.
Connect AUX IN 1 on the front panel
•
of the product to the Audio Out of an
external device/MP3 player.
Press the TUNER/AUX button to
•
select AUX1.
USB REC button
USB button
USB 2 jack for Playing and USB
Recording
USB 1 jack for Playback only.
TEMPO button
NON-STOP MUSIC RELAY button
DANCE TIME button
DJ JOG
+PANNING button
DJ BEAT button
CD/ Bluetooth button
STOP button
BACKWARD SEARCH/SKIP button
8a9
%
0
02 Getting Started
!
@
#
$^
7 English
Getting Started
Rear Panel
MX-HS6000
MX-HS7000
Cooling fan
The fan operates while the unit is powered
•
on.
If you set the unit to the minimum volume,
1
the fan won't operate.
Secure a minimum of 6 inches (15 cm) of
clear space on all sides of the fan when
installing the product.
AUX IN 2 Terminals
Use an Audio Cable (not supplied) to
1.
connect AUX IN 2 on the product to Audio
Out on an external analog output device.
Be sure to match connector colors.
•
If the external analog output device has
•
only one Audio Out jack, connect either
2
left or right terminal.
Press the TUNER/AUX button to select
•
AUX 2.
If the product is in AUX mode for more
•
than eight hours and no buttons on the
front panel or remote are pushed, the
system will turn off.
1
2
3
4
1
2
3
4
8 English
7
6
5
7
6
5
FM Antenna Terminals
Connect the FM antenna to the FM
1.
antenna connector terminal.
Slowly move the antenna wire until you find a
2.
location where reception is good, then fasten
3
it to a wall or other rigid surface.
If reception is poor, you may need to install
3.
an outdoor antenna. To do so, connect an
outdoor FM antenna to the FM socket on
the rear of the system using a 75Ω coaxial
cable (not supplied).
LED Terminals for Speaker Beat Waving.
4
ONLY FOR SERVICE
5
This jack is just for testing, please don't use
•
it.
POWER
6
Insert only provided power cable.
•
2.1 CH Speaker Terminals (MX-HS6000)
2.2 CH Speaker Terminals (MX-HS7000)
To achieve the correct sound quality,
1.
when you connect the speakers, match
the color of the speaker plugs to the color
7
of the speaker jacks. See below.
LEFT channel (marked ).
•
RIGHT channel (marked ).
•
Don't force the Purple SUBWOOFER
•
connector into the White or Red speaker
jack.
Remote Control
NON-STOP MUSIC RELAY
Power
Bluetooth
CD
TUNING MODE
USB
TUNER/AUX
TEMPO
SKIP
PLAY/PAUSE
STOP
FOOTBALL
MUTE (Turn off the sound temporarily.
Press again to turn the sound back on.)
BEAT WAVING
TV SoundConnect
USB REC
REC SPEED
MO/ST
+PANNING
DJ BEAT
EFFECT LEVEL
SEARCH
REPEAT
GIGA SOUND BEAT
GOAL
02 Getting Started
EQ
VOLUME (–, +)
PROGRAM
TIMER SET
TIMER ON/OFF
DISPLAY
MY KARAOKE
Installing Batteries In The Remote Control
Place batteries in the remote control so they
•
match the of the illustrations in the battery
compartment. : (+) to (+) and (–) to (–).
Do not dispose of batteries in a fire.
•
Do not short circuit, disassemble, or overheat
•
the batteries.
Danger of explosion if the battery is replaced
•
with the wrong battery type. Replace only
with the same or equivalent type.
The remote control can be used up to
•
approximately 23 feet (7 meters) in a
straight line from the system.
DANCE TIME
TUNING/ALBUM ,,
DELETE
SLEEP (Set a sleep time to shut off the
product.)
AUTO CHANGE
MIC VOLUME –, +
.
9 English
Getting Started
Accessories
Check for the supplied accessories below.
User Manual
(AH68-02680D)
Power Cable
(3903-000467)
Figures and illustrations in this user's manual are provided for reference only and may differ
•
from actual product appearance.
Remote Control / Batteries
(AH59-02613A/4301-000116)
Rubber Foot (8ea)
(AH81-05916L)
FM Antenna
(AH42-00021A)
(For Subwoofer
power cable 1EA)
Toroidal ferrite core
(3301-001201)
Connecting the Speakers
Recommended speaker setup.
| IMPORTANT |
✎The product may not operate properly if it is subject to shaking or external
shocks or if the speakers are not installed as recommended.
✎Do not stretch the speaker wires or place a heavy object on them.
✎Please place these subwoofers separately and keep a distance at least 2
inches /5cm for each other.(only for MX-HS7000)
(MX-HS7000)
(MX-HS6000)
Attaching the speaker foot
Attach the supplied speaker feet to the bottom rear corners of each
speaker as shown in the illustration to stabilize the speakers and prevent
them from slipping.
10 English
Rubber Foot
Loading...
+ 21 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.