Samsung LH75QBNWLGC/EN User Manual

User Manual
QBH-TR (QB65H-TR QB75H-TR) QBN-W (QB75N-W)
The colour and the appearance may differ depending on the product, and the content in the manual is subject to change without prior notice to improve the performance.
An administration fee may be charged in the following situations:
(a) An engineer is called out at your request, but it is found that the product has no defect (i.e., where the user manual has not been read).
(b) You bring the unit to a repair centre, but it is found that the product has no defect (i.e., where the user manual has not been read).
You will be informed of the administration fee amount before a technician visits.
© Samsung Electronics
Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Trademarks other than Samsung Electronics are property of their respective owners.
Table of contents
Before Using the Product
Safety Precautions 5
Safety symbols 5 Electricity and Safety 6 Installation 7 Operation 9 Cleaning 11
Storage and Maintenance 12
Precautions for Use 12
Preparations
Checking the Components 13
Parts 14
QB65H-TR/QB75H-TR 14 QB75N-W 15
Ports 16
QB65H-TR/QB75H-TR 16 QB75N-W 17 Tray 18 Using the touch function 19 Anti-theft Lock 19
Remote Control 20
Before Installing the Product (Installation Guide) 22
Tilting Angle 22 Ventilation 22
Installing the Wall Mount 23
Preparing before installing Wall-Mount 23 Installing the Wall Mount 23 Wall Mount Kit Specifications (VESA) 24
Using a touchscreen monitor
Touchscreen monitor 25
Read below before using the product 25
Connecting the touchscreen monitor 26
Connecting to a PC 26
Configuring the touchscreen monitor settings 27
Calibration 27
Main Menu 29
Controlling the screen 30
Touchscreen gestures 30 Notes 31
Connecting and Using a Source Device
Before Connecting 32
Pre-connection Checkpoints 32
Connecting to a PC 32
Connection Using an HDMI Cable 32 Connection Using an DP Cable 33
Connection Using a DVI Cable (Digital type) 33 Connection Using an HDMI-DVI Cable 34
Connecting to a Video Device 35
Connection Using an HDMI-DVI Cable 35 Connection Using an HDMI Cable 36
Connecting to an Audio System 36
Connecting the LAN Cable 36
Changing the Input source 37
Open 37 Remote Workspace 38
Multiple Display Control
Cable Connection 39
RS232C Cable 39 LAN Cable 40 Connection 42 Control Codes 43
Using MDC 47
MDC Programme Installation/Uninstallation 47
2
Table of contents
Screen Adjustment
Picture Mode 48
Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R) 49
Colour Temperature 50
White Balance 51
2 Point 51 20 Point Settings 51
Gamma 52
HLG / ST.2084 / BT.1886 52
Calibrated value 52
Advanced Settings 53
Contrast Enhancer 53 Black Tone 53 Flesh Tone 53 RGB Only Mode 53 Colour Space Settings 54 HDMI UHD Color 54 Motion Lighting 54 HDR+ Mode 54
Picture Options 55
Colour Tone 55 Digital Clean View 55 HDMI Black Level 56 Film Mode 56 Dynamic Backlight 56
Picture Size Settings 57
Picture Size 57 Fit to screen 57 Zoom and Position 57
Reset Picture 58
OnScreen Display
Screen Protection 59
Auto Protection Time 59 Screen Burn Protection 59
Message Display 62
Source Info 62 MDC Message 62
Language 63
Reset OnScreen Display 63
Sound Adjustment
Sound Mode 64
Balance 65
Equaliser 65
HDMI Sound 65
Sound Output 65
Auto Volume 66
Reset Sound 66
Network
Network Status 67
Open Network Settings 67
Network Type 67 Network Settings (Wired) 68 Network Settings (Wireless) 70 Use WPS 72
Server Network Settings 72
Proxy server 72
Device Name 72
System
Whiteboard Manager 73
Start from Home 73 Reset Interval 73 Samba 74 Email 74 USB Lock 74 Network Lock 74 Web Browser Settings 75 Background colour 76
Accessibility 77
High Contrast 77
3
Table of contents
Enlarge 77
Start Setup 77
Time 78
Clock Set 78 DST 78 Power On Delay 78
Power Control 79
Auto Power On 79 Max. Power Saving 79 Network Standby 79 Power Button 79
Eco Solution 80
Energy Saving Mode 80 Screen Lamp Schedule 80 Auto Power Off 81
Temperature Control 81
ID Settings 82
Device ID 82 PC Connection Cable 82
Custom Logo 86 Game Mode 87
Reset System 87
Support
Software Update 88
Update Now 88
Contact Samsung 88
Reset All 88
Troubleshooting Guide
Requirements Before Contacting Samsung Customer Service Centre 89
Check the followings. 89
Appendix
Responsibility for the Pay Service (Cost to Customers) 99
Not a product defect 99 A Product damage caused by customer's fault 99 Others 99
Prevention of Afterimage Burn-in 100
What is afterimage burn-in? Recommended prevention practices
Licence 101
100 100
Change PIN 82
Security 83
Safety Lock On 83 Button Lock 83 Remote Management 84 Secured Protocol 84
General 85
Smart Security 85 HDMI Hot Plug 85
Specifications
General 96
Preset Timing Modes 97
Checking the Resolution and Frequency 97
4
Chapter 01

Before Using the Product

Safety Precautions

The following safety instructions are to ensure your personal safety and prevent property damage. Please read the following to ensure the proper use of the product.

Safety symbols

Symbol Name Meaning
Warning
Caution
Prohibition
Instruction
A serious or fatal injury may result if instructions are not followed.
Personal injury or damage to properties may result if instructions are not followed.
Do NOT attempt.
Follow directions.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
This symbol indicates that this product has included important literature concerning operation and maintenance.
Class II product: This symbol indicates that a safety connection to electrical earth (ground) is not required. If this symbol is not present on a product with a mains lead, the product MUST have a reliable connection to protective earth (ground).
AC voltage: Rated voltage marked with this symbol is AC voltage.
DC voltage: Rated voltage marked with this symbol is DC voltage.
Caution. Consult instructions for use: This symbol instructs the user to consult the user manual for further safety related information.
5

Electricity and Safety

"
The following images are for reference only. Real-life situations may differ from what is shown in the images.
Warning
Do not touch the power plug with wet hands.
Otherwise, an electric shock may result.
Do not bend or pull the power cable with force. Be careful not to leave the power cable under a heavy object.
Product failure, an electric shock or fire may result from a damaged cable.
Do not connect multiple products to a single power socket.
Overheated power sockets may cause a fire.
Insert the power plug all the way in so it is not loose.
An unsecure connection may cause a fire.
Clean any dust around the pins of the power plug or the power socket with a dry cloth.
A fire may result.
Connect the power plug to a grounded power socket. (Except for devices that do not provide grounding)
An electric shock or injury may result.
Do not use a damaged power plug or a loose power socket.
An electric shock or fire may result.
6
Caution
Hold the plug when disconnecting the power cable from the power socket.
An electric shock or fire may result.
When connecting the power plug to the port, be sure to connect it completely.
If the power plug is not completely connected to the port, the plug may be unexpectedly disconnected, or there is a risk of overheating due to overcurrent, leading to safety accidents.
Only use the power cable provided with your product by Samsung. Do not use the power cable with other products.
An electric shock or fire may result.
Keep the power socket where the power cord is connected unobstructed.
When a problem occurs with the product, the power cord must be unplugged to completely cut off power to the product. The power is not completely cut off by using only the Power button on the body of the product.
Do not disconnect the power cable while the product is being used.
The product may become damaged by an electric shock.

Installation

Warning
Before moving the product, turn off the power switch and disconnect the power cable and all other connected cables.
Damage to the cable may cause a fire or electric shock.
When installing the product, keep it at a distance from the wall so that it is well ventilated.
An increased internal temperature may cause a fire.
Do not install the product in a poorly ventilated space such as bookcase or closet.
An increased internal temperature may cause a fire.
Keep the plastic packaging out of the reach of children.
Children's misuse of the plastic packaging may cause suffocation.
Do not install the power cable (DC power supply) and the product near head sources.
(Candles, mosquito repellents, cigarettes, sprays, heating devices, places exposed to direct sunlight, and more)
7
When installing the product, fix it firmly so that it does not fall.
If the product is not fixed firmly and a child touches the product while playing, the product may fall, causing damage to the product or injury to the child.
Do not install the product in a kitchen or near a kitchen counter.
Edible oil or oil vapor can damage or deform the product.
Have a technician install the wall-mount hanger.
Installation by an unqualified person can result in an injury. Only use approved cabinets.
If the product is installed in an unusual location, the surrounding environment may cause a serious quality problem. Therefore, be sure to contact Samsung Customer Service Centre before installation.
(Places where many fine dusts are generated, places where chemicals are used, places with too high or low temperatures, places with a lot of moisture or water, transportation equipment such as vehicles, airports and stations used continuously for a long time, and more)
Caution
When lifting and moving the product, do not touch the screen display, and make sure that at least two people work together.
The product may fall, causing personal injury or product damage.
Do not lay down the product on its front.
The screen may become damaged.
Prolonged exposure to direct sunlight may discolor the surface of the screen display.
8

Operation

Warning
If the product generates a strange noise, a burning smell, or smoke, unplug the power plug immediately and contact your Samsung Customer Service Centre.
An electric shock or fire may result.
Keep the remote control batteries and the small accessories out of the reach of children. Ensure children do not swallow any of them.
If children have had the battery in their mouths, consult your doctor immediately.
If the product is dropped or its appearance is damaged, turn off the power switch and disconnect the power cord. Then contact Samsung Customer Service Centre.
Continued use can result in an electric shock or a fire.
Do not apply an impact to the product.
The screen display may be damaged.
An electric shock or fire may result.
Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects that burn easily (paper, matches, etc) into the product (via the vent or input/output ports, etc).
If foreign substances enter the product, be sure to power off the product and disconnect the power cord. Then contact Samsung Customer Service Centre.
Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the product.
If foreign substances such as water enter the product, be sure to disconnect the power cord. Then contact Samsung Customer Service Centre.
Product failure, an electric shock or fire may result.
During a lightning or thunderstorm, power off the product and disconnect the power cord.
An electric shock or fire may result.
Do not move the product by pulling the power cord or any cable.
Product failure, an electric shock or fire may result from a damaged cable.
Ensure the vents are not blocked by tablecloths or curtains.
An increased internal temperature may cause a fire.
Do not leave heavy objects or items that children like (toys, sweets, etc.) on top of the product.
The product or heavy objects may fall as children try to reach for the toys or sweets resulting in a serious injury.
9
Do not hang on or climb on the product.
The product may fall, causing personal injury or even death.
Be especially careful that children do not hang on or climb on the product.
While the power plug is plugged into a power socket, do not insert a chopstick or other conductor into a remaining power socket. Also, after disconnecting the power plug from the power socket, do not touch the pins of the plug immediately.
Otherwise, an electric shock may result.
There is a high voltage inside the product. Never disassemble, repair or modify the product yourself.
Contact Samsung Customer Service Centre for repairs.
An electric shock or fire may result.
If a gas leakage is found, do not touch the product or the power plug, and ventilate the room immediately.
Sparks can cause an explosion or fire.
Do not use humidifiers or stoves around the product.
An electric shock or fire may result.
Caution
Insert each battery so that its polarity (+, –) is correct.
If the polarity is not correct, the battery may rupture or the internal fluid may leak, causing contamination and damage to the surroundings, fire, or personal injury.
Do not place heavy objects on the product.
Product failure or personal injury may result.
When you do not use the product for a long time due to vacation or other reason, disconnect the power cord from the power socket.
Dust accumulation combined with heat can cause a fire, electric shock or electric leakage.
Use the product at the recommended resolution and frequency.
Your eyesight may deteriorate.
The batteries (and rechargeable batteries) are not ordinary refuse and must be returned for recycling purposes. The customer is responsible for returning the used or rechargeable batteries for recycling.
The customer can return used or rechargeable batteries to a nearby public recycling centre or to a store selling the same type of the battery or rechargeable battery.
Rest your eyes for more than 5 minutes for every 1 hour of product use.
Eye fatigue will be relieved.
Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels.
When you do not use the product for a long time, activate power-saving mode or set the screen saver to moving-picture mode.
10
Do not use or keep combustible spray or an inflammable substance near the product.
An explosion or fire may result.
Use only the specified standardised batteries, and do not use a new battery and a used battery at the same time.
Otherwise, the batteries may be damaged or cause fire, personal injury or damage due to a leakage of the internal liquid.
Do not watch the product screen too closely and continuously for a long time.
Your eyesight may deteriorate.
Do not lift or move the product when it is in operation.
Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.
When using headphones or earphones, do not turn the volume too high or use them for a long time.
Damage to your hearing may result.

Cleaning

Warning
Do not spray water or cleaner directly on the product.
The product’s surface may be damaged, or the markings may be erased.
An electric shock or fire may result.
Caution
When cleaning, be sure to disconnect the power plug and wipe gently with a soft and dry cloth such as superfine fibers or cotton flannels to prevent scratches.
The product's surface may be damaged, or the markings may be erased.
Be sure to use a soft and dry cloth such as superfine fibers or cotton flannels because the surface of the product and the screen display are vulnerable to scratches.
The product's surface or the screen display can be easily scratched with foreign substances.
Do not apply chemicals containing alcohol, solvent, or surfactant such as wax, benzene, thinner, pesticide, air freshener, lubricant, or cleaner to the product.
The product's exterior may be discolored or cracked, the surface of the panel may be peeled off, or the markings may be erased.
11

Storage and Maintenance

"
If dust or dirt from the supplied pen remains on the protective glass, clean it referring to the instructions below.
Cleaning the exterior and display
Precautions
Wipe the surface with a slightly wet, soft cloth, and then wipe with a dry cloth.
1 32
Do not scratch the screen with nails or sharp objects. Scratches may leave marks or damage the product.
Removing a sticker attached on the screen may leave residues. Clean the residues before watching the screen.
Do not strongly press and rub the product. Damage to the product may result.
Do not wipe the screen with chemicals. Product failure may result.
Contact Customer Service Centre if the inside of the product needs cleaning (service fee will be charged).
Do not spray water directly on any part of the product. Product failure, an electric shock or fire may result from water that enters the product.
Due to the characteristics of high-glossy products, using a UV humidifier nearby may create white-coloured stains on the product.

Precautions for Use

Be careful that if you use the supplied pen with a load exceeding 2.5 kg, scratches may occur on the protective glass.
If you use a ballpoint pen other than the supplied pen, be careful that the screen may be stained with ink or damaged.
"
We recommend that you use the supplied pen. Do not use sharp, pointed objects other than the pen.
12
Chapter 02

Preparations

"Contact the vendor where you
purchased the product if any components are missing.

Checking the Components

"The appearance of the components
may differ from the images shown.
"A stand is not provided with the
product. To install a stand, you can purchase one separately.
"The RS232C adapter can be used to
connect using the D-SUB(9-pin) to Stereo type RS232C cable.
Quick Setup Guide
Batteries (AAA x 2)
(Not available in some locations)
Touch Pen x 2 USB cable
Warranty card
(Not available in some locations)
Remote Control RS232C adapter HOLDER-CABLE
Regulatory guide Power cord
Holder-Ring x 4
(Supported model: QB75N-W)
13

Parts

"
The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
Parts Description

QB65H-TR/QB75H-TR

Remote sensor
QB65H-TR
Speaker
QB75H-TR
Pen holder
Network box mounting hole
Network box mounting hole
Remote sensor
Pen holder
Use the remote control within 7 m to 10 m from the sensor on the product at an angle of 30° from the left and right.
"
Store used batteries out of reach of children and recycle.
"
Do not use a new and used battery together. Replace both batteries at the same time.
"
Remove batteries when the remote control is not to be used for an extended period of time.
"
To enhance the IR receiver performance, connect an External IR Sensor (sold separately) to the IR IN port.
Press a button on the remote control pointing at the sensor on the front of the product to perform the corresponding function.
"
Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled.
Keep the touch pen in place.
Turns the product on or off.
"
Supported models: QB75H-TR
Panel Key
Speaker
14

QB75N-W

"
The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
Parts Description
Speaker
Remote sensor
Pen holder
Remote sensor
Pen holder
Use the remote control within 7 m to 10 m from the sensor on the product at an angle of 30° from the left and right.
"
Store used batteries out of reach of children and recycle.
"
Do not use a new and used battery together. Replace both batteries at the same time.
"
Remove batteries when the remote control is not to be used for an extended period of time.
"
To enhance the IR receiver performance, connect an External IR Sensor (sold separately) to the IR IN port.
Press a button on the remote control pointing at the sensor on the front of the product to perform the corresponding function.
"
Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled.
Keep the touch pen in place.
15

Ports

Port Description

QB65H-TR/QB75H-TR

"
The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
USB 1 ¨(1.0A)
RJ45
RS232C IN
DVI/MAGICINFO IN
HDMI IN 1
HDMI IN 2
DP IN
TOUCH OUT 1
USB 2(0.5A)
Connect to a USB memory device.
"
The USB ports on the product accept a maximum constant current of
1.0A. If the maximum value is exceeded, USB ports may not work.
Connects to MDC using a LAN cable. (10/100 Mbps)
"
Use Cat7(*STP Type) cable for the connection. *Shielded Twist Pair.
Connects to the MDC using an RS232C adaptor (DB9 to Stereo type).
DVI: Connects to a source device using a DVI cable or HDMI-DVI cable. MAGICINFO IN: To use MagicInfo, make sure to connect the DP-DVI cable.
"
To activate MagicInfo, the IWB S5 function must be turned OFF. Please contact a service centre.
Connects to a source device using a HDMI cable or HDMI-DVI cable.
Connects to a PC using a DP cable.
Connects to a PC using an USB cable to enable touch functions.
Connect to a USB memory device.
"
The USB ports on the product accept a maximum constant current of
0.5A. If the maximum value is exceeded, USB ports may not work.
DVI/HDMI/AUDIO IN
AUDIO OUT
IR IN
RS232C OUT
Receives sound from a source device via an audio cable.
Outputs sound to an audio device via an audio cable.
Connects to an external IR cable that receives signals from the remote control.
Connects to the MDC using an RS232C adaptor (Stereo to Stereo type).
16

QB75N-W

"
The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
Port Description
USB 1 ¨(1.0A)
Connect to a USB memory device.
"
The USB ports on the product accept a maximum constant current of
1.0A. If the maximum value is exceeded, USB ports may not work.
RJ45
RS232C IN
DVI IN
HDMI IN 1
HDMI IN 2
TOUCH OUT 1
USB 2(0.5A)
DVI/HDMI AUDIO IN
AUDIO OUT
IR IN
RS232C OUT
Connects to MDC using a LAN cable. (10/100 Mbps)
"
Use Cat7(*STP Type) cable for the connection. *Shielded Twist Pair.
Connects to the MDC using an RS232C adaptor (DB9 to Stereo type).
Connects to a source device using a DVI cable or HDMI-DVI cable.
Connects to a source device using a HDMI cable or HDMI-DVI cable.
Connects to a PC using an USB cable to enable touch functions.
Connect to a USB memory device.
"
The USB ports on the product accept a maximum constant current of
0.5A. If the maximum value is exceeded, USB ports may not work.
Receives sound from a source device via an audio cable.
Outputs sound to an audio device via an audio cable.
Connects to an external IR cable that receives signals from the remote control.
Connects to the MDC using an RS232C adaptor (Stereo to Stereo type).
17

Tray

"
The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
Port Description
USB (PC)
USB 3
¨
HDMI IN 3
TOUCH OUT 2
QUICK MENU
POWER
Remote sensor
Connect to a USB memory device.
Use an USB cable between the USB (PC) port on the product and a USB port on a PC to connect them.
1
Insert an USB storage device to the USB 3 ¨ port.
2
Connects to a source device using a HDMI cable or HDMI-DVI cable.
Connects to a PC using an USB cable to enable touch functions.
If you press the QUICK MENU button while the screen is on, the main menu appears at the bottom of the screen.
Turns the product on or off.
Press a button on the remote control pointing at the sensor on the front of the product to perform the corresponding function.
18

Using the touch function

Anti-theft Lock

"
The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
USB cable
To use the touch function with a Network box (sold separately) or computer connected to the
1
product, use the USB cable to connect the TOUCH OUT port on the product to the USB port on the Network box or computer.
If you connect the TOUCH OUT port to a PC that uses multiple monitors, the touch function
2
operates only on the primary monitor.
"
An anti-theft lock allows you to use the product securely even in public places.
"
The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details.
"
The following images are for reference only. Real-life situations may differ from what is shown in the images.
"
This function may not be supported depending on the model.
To lock an anti-theft locking device:
Fix the cable of your anti-theft locking device to a heavy object such as a desk.
1
Put one end of the cable through the loop on the other end.
2
Insert the locking device into the anti-theft lock slot at the back of the product.
3
Lock the locking device.
4
– An anti-theft locking device can be purchased separately. – Refer to the user guide provided with your anti-theft locking device for details. – Anti-theft locking devices can be purchased at electronics retailers or online.
19
HOME
CH
MagicInfo
Player I
DEL-/--
CH LIST

Remote Control

"
Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled.
"
A button without a description in the image below is not supported on the product.
Power on the product.
Adjust the volume.
Change the input source.
Display or hide the onscreen display menu, or
return to the previous menu.
.QZ
1
GHI
4
PRS
7
VOL
MENU
ABC
2
JKL
5
TUV
8
SYMBOL
0
MUTE
SOURCE
POWER
OFF
DEF
3
MNO
6
WXY
9
Power off the product.
Number buttons
Use to enter a PIN, enter a Date, etc.
Mute the sound.
Unmuting the sound: Press MUTE again or press the volume control(+ VOL -) button.
"Remote control button functions
may differ for different products.
20
TOOLS
INFO
SET
UNSET
PCADVIBHDMICDP
D
IR control
Move to the upper, lower, left or right menu, or adjust an option's setting.
Confirm a menu selection.
Return to the previous menu.
To place batteries in the remote control (AAA x 2)
LOCK
EXITRETURN
Exit the current menu.
It sets Safety Lock function.
To unlock: Press the button again.
"Remote control button functions
may differ for different products.
"Remove batteries when the remote
control is not to be used for an extended period of time.
21

Before Installing the Product (Installation Guide)

Ventilation

"
Contact Samsung Customer Service Centre for further details.
Installation on a Perpendicular Wall
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
Ensure that an authorised installation company installs the wall mount.
Otherwise, it may fall and cause personal injury.
Make sure to install the specified wall mount.

Tilting Angle

"
Contact Samsung Customer Service Centre for further details.
"
This model is designed for use in landscape orientation only.
The product can be tilted at a maximum angle of 5° from a perpendicular wall surface.
"
Do not use this model installed on a ceiling, floor, or table.
A Minimum 40 mm
B Ambient temperature: Under 35 °C
"
When installing the product on a perpendicular wall, allow at least 40 mm of space between the product and wall surface for ventilation and ensure that the ambient temperature is kept below 35 °C.
A
B
Installation on an Indented Wall
A Minimum 40 mm
B Minimum 70 mm
C Minimum 50 mm
D Minimum 50 mm
E Ambient temperature: Under 35 °C
"
When installing the product on an indented wall, allow at least the space specified above between the product and wall for ventilation and ensure that the ambient temperature is kept below 35 °C.
B
D
D
C
B
A
C
E
22

Installing the Wall Mount

Preparing before installing Wall-Mount

To install a wall-mount from another manufacturer, use the Holder-Ring.

Installing the Wall Mount

The wall mount kit (sold separately) allows you to mount the product on the wall.
The provided image is only for reference. For detailed information on installing the wall mount, see instructions provided with the wall mount.
We recommend you contact a technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you select to install the wall mount on your own.
23
Wall Mount Kit Specications (VESA)
"
Install your wall mount on a solid wall perpendicular to the floor. To install the product on the other wall area, contact the nearest agency.
If you install the product on a slanted wall, it may fall and result in severe personal injury.
Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.
Do not use screws that are longer than the standard length or do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the product.
For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on the wall mount specifications.
Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.
Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.
Do not mount the product at more than a 5 degree tilt.
Always have at least two people mount the product on a wall.
Standard dimensions for wall mount kits are shown in the table below.
VESA screw hole specs (A * B) in millimetres
400 × 400 M8 4
"
Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to electric shock.
Standard Screw Quantity
24
Chapter 03

Using a touchscreen monitor

Touchscreen monitor

Control a PC by tapping the screen instead of using an input device such as a keyboard or mouse. The touchscreen functions by detecting a minute electric current that runs through your body (capacitive). Make sure to use the surface of your finger tip when tapping the screen.

Read below before using the product

Take extra care to ensure an electrical substance does not contact the screen. The screen may not function properly if there is static.
Do not press hard on the touchscreen with your finger tip. Do not use a sharp object when tapping the screen. The screen may break or get damaged.
Do not tap the screen while wearing a glove, with a dirty finger, or using something sharp such as your fingernail or a ballpoint pen. The screen may not function properly.
Take extra care to ensure the screen does not contact moisture. The touch sensor may not function properly.
Displaying a still image on the screen for an extended period of time may cause after images (screen degradation) or stains. Switch off the screen when not in use.
When using your palm as an eraser, put your fingers together.
25

Connecting the touchscreen monitor

"
The supported ports may vary depending on the model.

Connecting to a PC

Connect your PC to the product using a HDMI or HDMI-DVI cable.
1
"
Use the appropriate cable for the port to connect to.
• Supported video ports: HDMI, DP(DisplayPort), DVI
Connecting the devices using a HDMI cable
HDMI IN
Connect the power cable from the product to the power outlet.
2
Connect the TOUCH OUT port on the product to a USB port on the PC using the USB cable.
3
"
TOUCH OUT 1 operates when the current screen is set to HDMI 1, HDMI 2, DisplayPort, or
DVI.
"
TOUCH OUT 2 operates when the current screen is set to HDMI 3.
TOUCH OUT 1, TOUCH OUT 2
"
If touchscreen control is not available after the devices are connected
– Make sure to connect the HDMI or HDMI-DVI cable before connecting the USB cable. – If touchscreen control is still unavailable after the cables are connected properly,
disconnect the USB cable and then connect it again.
Connecting the devices using a HDMI-DVI cable
HDMI IN
26
Conguring the touchscreen monitor settings
To properly use the touch function of the product in Windows, go to Tablet PC Settings and calibrate the product.
"
First connect the touchscreen monitor before configuring the following settings.
"
The maximum number of touchscreen monitors that can be connected simultaneously varies, depending on the operating system and graphics card settings.
"
If Tablet PC Settings is not found in Control Panel, search for Tablet PC Settings from Search Control Panel.
Tap the page displayed on the product with your finger.

Calibration

"
Instructions below are for Windows 8. The same method applies to both Windows 7, Windows 8 and Windows 10.
"
After changing the Picture Size from the OSD menu, you may need to calibrate the picture settings again.
"
In the occurrence of an error during calibration, go to Tablet PC Settings→theDisplay tab. Tap Reset, and calibrate again.
In the Display tab, select Setup under Configure.
1
2
"
In dual monitor mode: If the following page does not appear on the product, press the Enter key to display the page.
Touch this screen to identity it as the touchscreen.
If this is not the Tablet PC screen, press Enter to move to the next screen. To close the tool, press Esc.
27
Select the product from Display under Display options. Next, select Calibrate.
3
Perform calibration following the onscreen instructions displayed as shown in the image.
4
After calibration is complete, the message Do you want to save the calibration data?
5
appears. Select Yes.
Digitizer Calibration Tool
Do you want to save the calibration data?
Yes No
The touchscreen monitor has been calibrated successfully.
6
"
Selecting Reset will remove the calibration data.
To provide calibration samples, tap the crosshair each time that it appears on the screen. Right-click anywhere on the screen to return to the last calibration point. Press the Esc button to close the tool. Do not change your screen orientation until you have completed the calibration process.
28

Main Menu

2 10
Whiteboard
Open Working Screen
Buttons Description
Sub Menu
Available menu items depend on the mode.
Whiteboard:
Document/Image Viewer:
Player:
"
For detailed menu for each mode, see Quick Guide under More (
Launch Whiteboard.
View and select content from the internal/external storage, change the connected source, or launch an installed application.
Change the current screen to another screen or close a screen.
Whiteboard Reset All
Buttons Description
More: View more options, such as Email, Adjust volume, Quick Guide, Settings.
Email: Send email messages.
Adjust volume: Adjust the volume.
Quick Guide: View details about how to use the device.
Settings: Access the settings menu.
).
View the name of the current file in use or the current input mode name (source name).
View the current time.
"
When the user taps the clock( ), the Clock Set will be displayed.
All unsaved whiteboard data will be deleted and all open windows will be closed.
Change the position of the main menu to the selected area.
29

Controlling the screen

Touchscreen gestures

Using touchscreen gestures is similar to using a mouse.
Tap
Lightly tap the screen.
Use this gesture to select a feature or menu item.
"
It is similar to clicking on a mouse.
Drag
Lightly touch and drag in any direction on the screen.
Use this gesture to move in a specific direction on a web page, map or photo.
"
It is similar to dragging a mouse.
Double tap
Tap the screen twice.
Use this gesture to run the selected programme.
"
It is similar to double-clicking on a mouse.
30
Loading...
+ 71 hidden pages