SAMSUNG LE32N71B, LE46N71B, LE40N71B User Manual [da, no, fi, sv, tr]

LCD TV
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Kontakt SAMSUNG
Om du har några frågor eller synpunkter om Samsungs produkter, är du välkommen att kontakta Samsung Support.
Kontakt SAMSUNG
Hvis du har spørgsmål eller kommentarer vedrørende Samsung produkter, venligst kontakte Samsung Support.
Kontakt SAMSUNG
Om du har spørsmål eller synspunkter om Samsungs produkter, er du velkommen å kontakte Samsung Support.
Ota yhteyttä Samsungiin
Jos sinulla on kysymyksiä tai kommentteja koskien Samsung tuotteita voitte ottaa yhtyettä Samsung tukeen.
Dünyanın her yerinden SAMSUNG’a ulaşın.
Samsung ürünleri ile ilgili sorularınız ya da yorumlarınız varsa lütfen SAMSUNG müşteri hizmetleri merkezi ile temasa geçin.
Country
BELGIUM CZECH REPUBLIC DENMARK FINLAND FRANCE GERMANY HUNGARY ITALIA LUXEMBURG NETHERLANDS NORWAY POLAND PORTUGAL RUSSIA SLOVAKIA SPAIN SWEDEN U.K UKRAINE
Customer Care Center
02 201 2418 844 000 844 38 322 887 09 693 79 554 08 25 08 65 65 (€ 0,15/Min) 01805 - 121213 (€ 0,12/Min) 06 40 985 985 199 153 153 02 261 03 710 0900 20 200 88 (€ 0.10/Min) 231 627 22 0 801 801 881 80 8 200 128 8-800-200-0400 0850 123 989 902 10 11 30 08 585 367 87 0870 242 0303 8-800-502-0000
Web Site
www.samsung.com/be www.samsung.com/cz www.samsung.com/dk www.samsung.com/fi www.samsung.com/fr www.samsung.de www.samsung.com/hu www.samsung.com/it www.samsung.lu www.samsung.com/nl www.samsung.com/no www.samsung.com/pl www.samsung.com/pt www.samsung.ru www.samsung.com/sk www.samsung.com/es www.samsung.com/se www.samsung.com/uk www.samsung.com/ur
LE32N7 LE40N7 LE46N7
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PICTURE IN PICTURE (PIP)
TELETEXT
BN68-01047M-01
Register your product at www.samsung.com/global/register
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of
• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
Att tänka på vid visning av stillbild
Stillbilden kan orsaka permanenta skador på bildskärmen.
• Visa inte en stillbild på skärmen i mer än två timmar, eftersom det kan leda till att bilden ligger kvar på skärmen. Att bilden på skärmen behålls kallas även “bildskärmsbränning”. Du kan undvika att bilden behålls genom att minska på ljusstyrkan och kontrasten på bildskärmen när du visar stillbilder.
Användning av LCD TV:n i 4:3-format under en längre tid kan lämna spår av kanterna till vänster, höger och mitt på skärmen
• Visning av stillbilder från tv-spel och datorer längre stunder kan skapa delvisa efterbilder. För att förhindra detta ska du minska på ljusstyrka och kontrast vid visning av stillbilder.
Forholdsregler for visning af et stillbillede
Et stillbillede kan medføre permanent beskadigelse af tv-skærmen.
• Vis ikke et stillbillede på LCD-panelet i mere end to timer, da det kan medføre billedindbrænding. Denne billedindbrænding kaldes også “screen burn”. For at undgå dette skal lysstyrken og kontrasten ved visning af et stillbillede reduceres.
Hvis du ser LCD-tv i 4:3-format i lang tid, kan der opstå kanter, der vises til venstre, højre og på midten af skærmen.
• Visning af stillbilleder fra videospil og pc i længere end en bestemt tid kan medføre delvise after-billeder. For at forhindre dette kan du reducere ‘lysstyrke’ og ‘kontrast’, når du afspiller stillbilleder i længere tid.
Forholdsregler ved visning av et stillbilde
Et stillbilde kan forårsake permanent skade på TV-skjermen.
• La ikke et stillbilde vises på LCD-panelet i mer enn 2 timer, da det kan forårsake et ekkobilde. Denne effekten er også kjent som “screen burn”, det vil si at skjermbildet brenner seg fast. Du kan unngå dette ved å redusere lysstyrken og kontrastnivået på skjermen når du viser stillbilder.
Dersom LCD-skjermen brukes til visning i 4:3-format over lengre tid, kan dette føre til at det oppstår linjer til høyre, venstre og i midten
• Dersom spill og annet settes på pause i en lengre periode enn det som er anbefalt, kan dette gi en etterbildeeffekt. Denne virkningen kan forebygges ved at ‘lysstyrke’ og ‘kontrast’ reduseres ved visning av stillbilder.
Varoituksia pysäytyskuvan käytöstä
Pysäytyskuva voi vaurioittaa television kuvaruutua pysyvästi.
• Älä pidä nestekidetelevision kuvaruudussa pysäytyskuvaa 2 tuntia kauempaa, koska tällöin kuva voi jäädä ruutuun pysyväksi jäännöskuvaksi. Jäännöskuvaa kuvataan myös “kuvan palamiseksi kuvaruutuun”. Kun kuvaruudussa on pysäytyskuva, vähennä kirkkautta ja kontrastia, jottei jäännöskuvaa pääsisi muodostumaan.
LCD-television pitkäaikainen katselu 4:3 kuvasuhteella saattaa jättää kuvaruudulle reunuksia, jotka johtuvat valon säteilyn
• Videopelien ja pc:n still-kuvien määrätyn ajan ylittävä näyttö saattaa aiheuttaa osittaisia jälkikuvia. Voit estää tämän ilmiön vähentämällä kuvaruudun kirkkautta ja kontrastia, jos katselet pitkään pysäytyskuvia.
Sabit Görüntünün Gösterilmesiyle ilgili Önlemler
Sabit görüntü TV ekranında kalıcı hasara neden olabilir.
• LCD ekran panelinde sabit bir görüntüyü 2 saatten fazla tutmay›n. Bu, ekran görüntüsünde takılmaya neden olabilir. Bu görüntü takılmasına, “ekran yanması” da denir. Bu tür bir kalıcı görüntüyü önlemek için hareketsiz bir görüntü ekrandayken parlaklık ve kontrast değerlerini düük bir seviyeye ayarlayınız.
LCD televizyonu uzun süre 4:3 formatında izlemek, farklı ıflık emisyonundan dolayı ekranın solunda, sağında ve ortasında çizgi
• Video oyunlarından ve bilgisayardan uzun süre durağan resimlerin görüntülenmesi kısmi görüntü izi oluflturabilir. Bu etkiyi önlemek için, durağan görüntüleri ekranda tutarken ‘parlaklık’ ve ‘kontrast’ derecelerini azaltın.
the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.
vilket orsakas av skillnaden i ljusstrålning i skärmen. Uppspelning av en DVD eller tv-spel kan orsaka samma effekter på skärmen. Skador som orsakas av det som beskrivs ovan täcks inte av garantin.
Dette skyldes den forskellige lyspåvirkning af skærmen. Afspilning af dvd eller brug af en spillekonsol kan medføre en tilsvarende effekt på skærmen. Beskadigelse forårsaget af ovenstående dækkes ikke af forsikringen.
av skjermen. Dette på grunn av forskjeller mellom lysstrålingen på de forskjellige stedene på skjermen. Dersom skjermen brukes til videospill og visning av DVDer kan dette gi liknende resultater. Skader forårsaket av effekten ovenfor, dekkes ikke av garantien.
eroavuudesta kuvaruudulla. DVD:n tai pelin toisto saattaa aiheuttaa samanlaisen vaikutuksen näytöllä. Takuu ei kata tästä syystä syntyneitä vaurioita.
eklinde izler bırakabilir. DVD ya da oyun konsolunu oynatmak da benzer etkiye yol açabilir. Yukarıdaki etkilerin neden olduğu hasarlar Garanti kapsamında değildir.
© 2006 Samsung Electronics Co., Ltd. All rights reserved.

Contents

English
English
CONNECTING AND PREPARING YOUR TV
List of Parts....................................................................................... 2
Installing the Stand ................................................................. 2
Installing the Wall Mount Kit ................................................ 2
Viewing the Control Panel ......................................................... 3
Viewing the Connection Panel ................................................. 4
Viewing the Remote Control ..................................................... 6
Installing Batteries in the Remote Control ........................... 6
Switching On and Off .................................................................. 7
Placing Your Television in Standby Mode ............................. 7
Plug & Play ....................................................................................... 7
SETTING THE CHANNELS
Storing Channels Automatically .............................................. 8
Storing Channels Manually ........................................................ 8
Setting the Channel Manager .................................................. 9
Activating the Child Lock ...................................................... 10
Sorting the Stored Channels ..................................................... 10
Assigning Channels Names ....................................................... 11
Fine Tuning Channel Reception ............................................... 11
SETTING THE PICTURE
Changing the Picture Standard ................................................ 12
Adjusting the Custom Picture................................................... 12
Changing the Colour Tone ......................................................... 13
Adjusting the Color Tone with the Preferred
Color Component .......................................................................... 13
Resetting the Picture Settings to the
Factory Defaults ............................................................................. 14
Changing the Picture Size .......................................................... 14
Changing the Auto Wide (4:3) .................................................. 14
Freezing the Current Picture ..................................................... 15
Digital Noise Reduction .............................................................. 15
DNIe Demo (Digital Natural Image engine) ........................ 15
Changing the Colour Space....................................................... 15
Viewing the Picture In Picture (PIP) ........................................ 16
SETTING THE SOUND
Changing the Sound Standard ........................................... 17
Adjusting the Sound Settings ............................................. 17
Setting the TruSurround XT (SRS TSXT) ........................... 17
Adjusting the Volume Automatically ................................ 18
Selecting the Internal Mute .................................................. 18
Listening to the Sound of the Sub Picture...................... 18
Resetting the Sound Settings to the
Factory Defaults ........................................................................ 19
Connecting Headphones ...................................................... 19
Selecting the Sound Mode ................................................... 19
SETTING THE OTHERS
Choosing Your Language ...................................................... 21
Using Game Mode ................................................................... 21
Setting the Blue Screen Mode /
Selecting the Melody ............................................................. 22
Using the Energy Saving Feature ....................................... 22
Setting the Blue Eye ................................................................ 22
Selecting the Source ............................................................... 23
Editing the Input Source Names ........................................ 23
WISELINK
Using the WISELINK Function .............................................. 24
Using the WISELINK Menu .................................................... 25
Using the PHOTO (JPEG) List ................................................ 25
Viewing Photo File Information .......................................... 27
Selecting a Photo and Slide Show ..................................... 27
Rotating ....................................................................................... 28
Zooming-in ................................................................................. 29
Copying Image Files ................................................................ 30
Deleting Image Files................................................................ 30
Printing a Photo ........................................................................ 31
Using the MP3 List ................................................................... 31
Copying Music Files ................................................................. 32
Deleting Music Files ................................................................ 32
Using the Setup Menu ........................................................... 33
USING THE TELETEXT FEATURE
Teletext Decoder ...................................................................... 34
Displaying the Teletext Information .................................. 34
Selecting a Specific Teletext Page ...................................... 35
Using Fastext to Select a Teletext Page ............................ 35
Setting Up Your Remote Control ........................................ 36
Remote Control Codes ........................................................... 38
SETTING THE PC
Setting up Your PC Software
(Based on Windows XP) ......................................................... 41
Display Modes ........................................................................... 41
Setting the PC ............................................................................ 42
RECOMMENDATIONS FOR USE
Using the Anti-Theft Kensington Lock ............................. 42
Troubleshooting:
Before Contacting Service Personnel ............................... 42
Technical and Environmental Specifications ................ 44
SETTING THE TIME
Setting and Displaying the Current Time ........................ 20
Setting the Sleep Timer.......................................................... 21
Switching the Television
On and Off Automatically ..................................................... 21
Symbol Press Important Note One-Touch
English-1
Button

List of Parts

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
M4 X L16
Remote Control &
Batteries (AAA x 2)
Owner’s Instructions
Warranty card / Safety Guide / Registration Cards (Not available in all locations) The stand and stand screw may not be included depending on the model.
Power Cord Cover-Bottom
Warranty card Safety Guide Registration Cards
Stand Screw X4 Stand

Installing the Stand

< 2 >< 3 >
1. Place the TV faced down on a soft cloth or cushion on a table.
2. Put the stand into the hole at the bottom of the TV.
3. Insert screw into the hole indicated and tighten.
The stand is installed for models with the screen size of 40 inch and above.
Cleaning Cloth

Installing the Wall Mount Kit

Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.
Remove the stand and cover the bottom hole with a cap and fasten with two screws.
English-2

Viewing the Control Panel

The product colour and shape may vary depending on the model.
SOURCE
Toggles between all the available input sources (TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI1, HDMI2). In the on-screen menu, use this button as you use the ENTER on the remote control.
button
Press to change channels. In the on-screen menu, use the as you use the and buttons on the remote control. the TV by using the Channel buttons.)
(Without the Remote Control, you can turn on
buttons
MENU
Press to see an on-screen menu of your TV’s features.
Press to decrease or increase the volume. In the on-screen menu, use the as you use the and buttons on the remote control.
buttons
Speakers
(
Power)
Press to turn the TV on and off.
Power Indicator Blinks and turns off when the power is on and lights
up in stand-by mode.
Remote Control Sensor
Aim the remote control towards this spot on the TV.
English-3

Viewing the Connection Panel

[Rear Panel Jacks]
Power Input
Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable.
[Side Panel Jacks]
English-4
Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial / A cable television network / A satellite network
Connecting HDMI/DVI
-
Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players, AV receivers and digital TVs).
- No additional Audio connection is needed for an HDMI to HDMI connection. What is HDMI?
- “High Definition Multimedia Interface” allows the transmission of high definition digital video data and multiple
channels of digital audio ( 5.1 channels).
- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).
The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.
You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the “R - AUDIO - L” terminal
on DVI for sound output.
- When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure that
it has been set to a compatible video output mode as shown in the table below. Failure to observe this may result in picture distortion, image breakup or no picture.
Supported modes for DVI or HDMI
480i 50 Hz 60 Hz
- Do not attempt to connect the HDMI/DVI connector to a PC or Laptop Graphics Card. (This will result in a blank screen being displayed)
- If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box to the VCR (or DVD) and connect the VCR (or DVD) to your set.
- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio out connectors on the A/V device.
- Headphone may be connected to the headphone output (
Component
Connecting Set-Top Box, VCR or DVD
-
Connect the VCR or DVD SCART cable to the SCART connector of the VCR or DVD.
Connecting External A/V Devices
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
X X O
480p
O O O
While the headphone is connected, the sound from the built-in speakers will be disabled.
SERVICE
- Service connection for qualified service engineer.
Connecting AUDIO
- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio in
connectors on the Amplifier or DVD Home Theater.
Connecting Computer
-
Connect the D- Sub cable (optional) to “PC (PC IN)” on the rear of your set and the other end to the Video Card of your computer.
- Connect the stereo audio cable (optional) to “AUDIO (PC IN)” on the rear of your set and the other end to “Audio Out” of the sound card on your computer.
Connecting Component Devices (DTV/DVD)
- Connect component video cables (optional) to component connector (“PR”, “ P B”, “Y”) on the rear of your set and the other
ends to corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector (“P
-
The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
- Connect RCA audio cables (optional) to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD.
- This LCD TV displays its optimum picture resolution in 720p mode.
- This LCD TV displays its maximum picture resolution in 1080i mode.
Kensington Lock
- The Kensington lock (optional) is a device used to physically fix the system when used in a public place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
-
The place of the Kensington Lock may be different depending on its model.
576i
X X O
) on the rear of your set.
R”, “ P B”, “Y”) on your set.
576p
O X O
720p
O O O
1080i
O O O
English-5

Viewing the Remote Control

Selects a target device to be controlled by the Samsung remote
control
(TV, DVD, STB, CABLE, VCR)
(Refer to page 36~40)
Television Standby button Number buttons for direct
channel access One/Two-digit channel selection It displays "Channel Manager"
on the screen.
Selects the TV mode directly
VCR/DVD Functions Rewind, Stop, Play/Pause,
Fast/Forward
Volume increase
Volume decrease Temporary sound switch-off Menu display and
change confirmation Picture-In-Picture On / Off Picture effect selection Sound effect selection Sound mode selection SRS TSXT selection SET: Adjusts 5 separate devices - TV,
DVD, STB, CABLE, or VCR.
RESET: When your remote does not work, change the batteries and press the “RESET” button for 2-3 seconds before use.
Available source selection When pressing this button, a number of
buttons on the remote control (e.g.
Selects a target device, volume, channel and MUTE buttons) light up for a few seconds and then turn off to save power. This function is to conveniently use the remote control at night or when dark.
The performance of the remote control may be affected by bright light. This is a special remote control for the visually impaired, and has Braille points on the
Power, Channel and Volume buttons.

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AAA size batterie
Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
s.
English-6
Previous channel Automatic Power-off This function enables you to load saved
photo (JPEG) and audio files (MP3)
and to view or play them on the TV.
P : Next channel P
: Previous channel
Exit the OSD Control the cursor in the menu Use to see information on the
current broadcast Picture size selection Selects the PC mode directly Picture freeze Input source selection
Teletext Functions
Exit from the Teletext display Teletext index Teletext hold Teletext size selection Teletext store Teletext mode selection (LIST/FLOF) Teletext sub page P : Teletext next page
P
: Teletext previous page Teletext cancel Teletext reveal Alternately select Teletext, Double, or Mix. Fastext topic selection

Switching On and Off

The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
The standby indicator lights up on the front of the set.
2. Press the button on the front of the set.
You also can press the POWER button or the The programme that you were watching last is reselected automatically.
TV
( ) button on the remote control to turn the TV on.
3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or button on the right side of the set.
When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.
4. To switch your set off, press the POWER button again.

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWER
The screen is turned off and a blue standby indicator appears on the front of your set.
button on the remote control.
2. To switch your set back on, simply press the POWER , numeric buttons (0~9) or channel
up/down (
It is best to unplug the set from the mains and aerial.
/ ) button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example).

Plug & Play

When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available.
1. Press the POWER button on the remote control. The message “Start Plug & Play” is displayed with “OK” selected.
2. Select the appropriate language by pressing the  or button. Press the ENTER button to confirm your choice.
3. The message “Check antenna input.” is displayed with “OK” selected. Press the ENTER button.
Please check that the antenna cable is connected correctly.
4. Select the appropriate country by pressing the  or button. Press the ENTER button to confirm your choice.
5. The “Auto Store” menu is displayed with the “Start” selected. Press the ENTER button.
The channel search will start and end automatically. After all the available channels are stored, the “Clock Set” menu appears. Press the
ENTER
6. Press the ENTER button.
Select the “Hour” or “Minute” by pressing the
Set the “Hour” or “Minute” by pressing the
You can also set the hour and minute by pressing the number buttons on the remote control.
7. Press the ENTER button to confirm your setting.
Language: Select your language. Country: Select your country. Auto Store: Automatically scans for and stores channels available in the local area. Clock Set: Sets the current time for the TV clock.
button at any time to interrupt the memorization process.
or
or
English-7
button.
button.
If you want to reset this feature...
1. Press the MENU button to display the menu.
Press the or
button
to select “Setup”, then press the
ENTER
button.
2. Press the ENTER button again, to select “Plug & Play”.
3. The message “Start Plug & Play” is displayed.
- Storing Channels Automatically
- Storing Channels Manually

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.
1. Press the MENU button to display the menu.
Press the  or  button to select “Channel”, then press the
2. Press the ENTER button to select “Country”.
3. Select the appropriate country by pressing the or button.
Press the ENTER button to confirm your choice.
4. Press the or button to select “Auto Store”, then press the
5. Press the ENTER button.
The TV will begin memorizing all of the available channels. Press the
ENTER
button at any time to interrupt the memorization process and return to the “Channel” menu.
6. After all the available channels are stored, the “Sort” menu appears.
ENTER button.
ENTER button.

Storing Channels Manually

You can store up to 100 channels, including those received via cable networks. When storing channels manually, you can choose:
Whether or not to store each of the channels found. The programme number of each stored channel which you wish to identify.
1. Press the MENU button to display the menu.
Press the  or  button to select “Channel”, then press the
2. Press the or button to select “Manual Store”, then press the
3. Press the
ENTER button to select “Programme”.
4. To assign a programme number to a channel, find the correct number by pressing the  or button
and then press the
You can also set a programme number by pressing number buttons on the remote control.
ENTER button.
ENTER button.
ENTER button.
English-8
5. Press the or button to select “Colour System”, then press the ENTER button.
6. Select the colour standard required by pressing the or button then, press the
7. Press the or button to select “Sound System”, then press the
ENTER button.
8. Select the sound standard required by pressing the  or button, then press the
If there is an abnormal sound or no sound, re-select the sound system required.
9.
If you know the number of the channel to be stored, press the or button to select “Channel”. Press the ENTER button.
ENTER button.
ENTER button.
Select C (Air channel) or S (Cable channel) by pressing the  or  button. Press the  button to select channel. Select the required number by pressing the or button and then press the
Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode) You can also set a channel number by pressing number buttons on the remote control.
ENTER button.
10. If you do not know the channel numbers, press the  or button to select “Search”.
Press the ENTER button. Search by pressing the  or  button and then press the ENTER button.
11. Press the or button to select “Store”. Press the ENTER button to select “OK”.
12. Repeat steps 3 to 11 for each channel to be stored.
Programme: Selects a program number for the channel. Colour System: Sets the colour supporting system. Sound System: Sets the sound supporting system.

Setting the Channel Manager

Set the channels according to your preference. You can easily delete, add, or lock the channel you want.
1. Press the MENU button to display the menu. Press the  or button to select “Channel”, then press the
2.
Press the or button to select “Channel Manager”,
then press the ENTER button.
3.
Press the ENTER button again, to select “Channel Manager”.
4
.
Press the button to select “ ” line.
5
.
Press the or button to select the undesired channel,
then press the ENTER button to cancel.
6. Repeat steps 5 for each channel to be selected or canceled
7. Press the EXIT button to exit.
“ ”
is active when “Child Lock” is selected to “On”.
You can select these options by simply pressing the CH MGR button on the remote control.
Channel: Selects a channel. Search: Scans for the frequency value for the channel. Store: Saves your settings.
ENTER button.
English-9

Activating the Child Lock

This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out video and audio. Child Lock can­not be released using the buttons on the side. Only the remote control can release the Child Lock setting, so keep the remote control away from children.
1. Press the MENU button to display the menu. Press the  or button to select “Channel”, then press the
2.
then press the ENTER button.
3.
then press the ENTER button.
4.
5.
then press the
.
6
7
.
then press the ENTER button.
8. Repeat steps 7 for each channel to be locked or unlocked.
9. Press the EXIT button to exit.
selected on

Sorting the Stored Channels

You can exchange the numbers of two channels, in order to:
automatically stored.
most often.
1. Press the MENU button to display the menu. Press the  or button to select “Channel”, then press the
2.
3.
or button repeatedly. Press the ENTER button.
4.
change and then press the
number.
5.
6.
ENTER button.
Press the or button to select “Channel Manager”,
Press the or button to select “Child Lock”,
Press the or button to select “On”. Press the
ENTER
button.
Press the or button to select “Channel Manager”,
ENTER button.
Press the button to select “ ” line. Press the or button to select the channels you want to lock,
Select “On” or “Off” in “Child Lock” to easily turn the channels which
Press the or button to select “Sort”, then press the
“ ”
to be active or inactive.
Modify the numeric order in which the channels have been
Give easily remembered numbers to the channels that you watch
ENTER button.
ENTER
button.
Select channel number that you wish to change by pressing the
The selected channel number and name are moved to right side.
Press the
or
button to move to the position in which you would like to
ENTER
The selected channel is exchanged with the one previously stored to the chosen
button.
Repeat steps 3 to 4 for another channel to be sorted. Press the EXIT button to exit.
English-10

Assigning Channels Names

Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names.
1. Press the MENU button to display the menu. Press the  or button to select “Channel”, then press the
2.
Press the or button to select “Name”, then press the
3.
If necessary, select the channel to be assigned to a new name by
pressing the
4.
5.
Repeat steps 3 to 4 for each channel to be assigned to a new name.
Press the EXIT button to exit.
6.

Fine Tuning Channel Reception

Use fine tuning to manually adjust a particular channel for optimal reception.
1. Use the number buttons to directly select the channel that you want to fine tune.
2. Press the MENU button to display the menu. Press the  or  button to select “Channel”, then press the ENTER button.
3. Press the or button to select “Fine Tune”, then press the
4. Press the or button to adjust the fine tuning.
Press the
5. Press the EXIT button to exit.
Fine tuned channels that have been saved are marked with an asterisk “ * ” on the right-hand
side of the channel number in the channel banner. And the channel number turns red.
To reset the fine-tuning, select “Reset” by pressing the or  button and then press the
ENTER button.
ENTER button.
ENTER
button.
or
The selection bar is displayed around the name box.
To. ..
Select a letter, number or symbol Move on the next letter Move back the previous letter Confirm the name
The characters available are : Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters ( -, space)
ENTER
button. Press the ENTER button.
button.
Then...
or
button
button
ENTER button.
Press the Press the  button Press the Press the ENTER button
English-11

Changing the Picture Standard

You can select the type of picture which best corresponds to your viewing requirements.
1. Press the MENU button to display the menu. Press the  or button to select “Picture”, then press the
2.
Press the ENTER button again, to select “Mode”.
Press the
3.
Press the
Press the
4.
Press the EXIT button to exit.
Dynamic: Selects the picture for high-definition in a bright room.
You can also press the P.MODE button on the remote control to select one of the picture settings.
Standard: Selects the picture for optimum display in a normal environment.  Movie: Selects the picture for comfortable display in a dark room.  Custom: Select to view your favorite display settings.
(Refer to “Adjusting the Custom Picture”)
The Picture mode must be adjusted separately for each input source. You can return to the factory defaults picture settings by selecting the “Reset”.
(Refer to “Resetting the Picture Settings to the Factory Defaults” on page 14)

Adjusting the Custom Picture

Your set has several settings which allow you to control picture quality.
1. To select the desired picture effect, follow the “Changing the Picture Standard” instructions number 1 to 3.
2.
Press the
Press the
3.
Press the
particular item.
Press the EXIT button to exit.
4.
Contrast: Adjusts the lightness and darkness between objects and the background.  Brightness: Adjusts the brightness of the whole screen.  Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.  Colour: Adjusts the colours, making them lighter or darker.  Tint (NTSC only):
The adjusted values are stored according to the selected Picture mode. In PC Mode, Only “Contrast”, “Brightness” and “Colour” can be adjusted
ENTER button.
ENTER button again.
or
button to select the desired picture effect.
ENTER
button.
or button
ENTER
or button
to select a particular item.
button.
to decrease or increase the value of a
Press the ENTER button.
Adjusts the colour of objects, making them more red or green for a more natural look.
English-12

Changing the Colour Tone

You can select the most comfortable colour tone to your eyes.
1. To select the desired picture effect, follow the “Changing the Picture Standard” instructions number 1 to 3 on page 12.
2.
Press the or button to select “Colour Tone”, then press the ENTER button.
3.
Press the
Press the
4.
Cool2: Makes the colour temperature bluer than “Cool1” menu.
Cool1: Makes whites bluish. Normal: Keeps whites white.
ENTER
Press the EXIT button to exit.
The adjusted values are stored according to the selected Picture mode.
or button
to select the desired colour tone setting.
button.
Warm1: Makes whites reddish. Warm2: Makes the colour temperature
redder than “Warm1” menu.

Adjusting the Color Tone with the Preferred Color Component

You can adjust a picture’s color tone with your preferred color component.
1. To select the desired picture effect, follow the “Changing the Picture Standard” instructions number 1 to 3 on page 12.
2.
Press the or button to select “Colour Manager”,
then press the ENTER button.
3.
Press the
Press the
4.
Press the
ENTER
or button
particular item.
5.
Press the EXIT button to exit.
or button
R Contrast: the background. G Contrast: and the background. B Contrast: the background.
R Brightness:G Brightness:B Brightness:Reset:
Lightens or intensifies the red component of the border between objects and
Lightens or intensifies the green component of the border between objects
Lightens or intensifies the blue component of the border between objects and
Adjusts the brightness of the red component for the entire screen. Adjusts the brightness of the green component for the entire screen. Adjusts the brightness of the blue component for the entire screen.
Resets all settings to the defaults.
to select a particular item.
button.
to decrease or increase the value of a
Press the ENTER button.
You cannot select a "Colour Tone" in the "Colour Manager".
English-13

Resetting the Picture Settings to the Factory Defaults

You can return to the factory defaults picture settings.
1. To select the desired picture effect, follow the “Changing the Picture Standard” instructions number 1 to 3 on page 12.
2. Press the or button to select “Reset”, then press the ENTER button.
3.
Press the EXIT button to exit.
The “Reset” will be set for each picture mode.

Changing the Picture Size

You can select the picture size which best corresponds to your viewing requirements.
1. Press the MENU button to display the menu. Press the  or button to select “Picture”, then press the ENTER button.
2. Press the or button to select “Size”, then press the ENTER button.
3. Select the required option by pressing the or button.
Press the
ENTER
button.
4.
Press the EXIT button to exit.
Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.
You can select these options by simply pressing the P.SIZE button on the remote control.
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.  WIDE 4:3 : Magnify the size of the picture more than 4:3.  Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.  4:3: This is the default setting for a video movie or normal broadcasting.
“Auto Wide” function is available only in "TV", "Ext1", "Ext2", "AV", and "S-Video" mode. In PC Mode, only “16:9” and “4:3” mode can be adjusted.
Zoom : Select by pressing the or buttons. Use the or button to move the picture up and down. After selecting , use the or button to magnify or reduce the picture size in the vertical direction.
WIDE 4:3 : Move the screen up/down using the or button after selecting the by pressing the or ENTER button.

Changing the Auto Wide (4:3)

Adjusts the display picture size to 4:3 appropriate for input signal
1. Press the MENU button to display the menu. Press the  or button to select “Picture”, then press the ENTER button.
2. Press the  or button to select “Auto Wide (4:3)”, then press the ENTER button.
3. Select the required option by pressing the or button.
4.
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.  WIDE 4:3 : Magnify the size of the picture more than 4:3.  Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.  4:3: This is the default setting for a video movie or normal broadcasting.
Press the
ENTER
button.
Press the EXIT button to exit.
These functions don’t work in "Component", "PC", "HDMI1", and "HDMI2" mode.
English-14

Freezing the Current Picture

Press the STILL button to freeze a moving picture into a still one. Press again to cancel.

Digital Noise Reduction

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen.
1. Press the MENU button to display the menu. Press the  or button to select “Picture”, then press the ENTER button.
2. Press the or button to select “Digital NR”, then press the ENTER button.
3.
Press the or button to select “On” or “Off”. Press the
4. Press the EXIT button to exit.

DNIe Demo (Digital Natural Image engine)

Samsung’s new technology brings you more detailed images with contrast and white enhancement. A new image compensation algorithm gives viewers brighter and clearer images. DNIe technology will match every signal to your eyes. You can see how DNIe improves the picture by setting DNIe Demo mode to On.
1. Press the MENU button to display the menu. Press the  or button to select “Picture”, then press the ENTER button.
2. Press the or button to select “DNIe Demo”, then press the ENTER button.
3.
Press the or button to select “On” or “Off”. Press the
4. Press the EXIT button to exit.
These functions don’t work in PC mode. The DNle Demo is designed to show the difference between the regular and
DNIe pictures.
By default, the product displays the picture with DNle applied.
ENTER
ENTER
button.
button.

Changing the Colour Space

Colour space is a colour matrix composed of red, green, and blue colours. Select your favorite colour space and experience the world of natural colour.
1. Press the MENU button to display the menu. Press the  or button to select “Picture”, then press the ENTER button.
2. Press the or button to select “Colour Space”, then press the ENTER button.
3.
Press the
4. Press the EXIT button to exit.
Press the or button to select “Wide” or “Auto”.
ENTER
button.
Wide : Wide Colour Space offers deep and rich colour tone.  Auto : Auto Colour Space automatically adjusts to natural colour tone based on program
sources.
English-15

Viewing the Picture In Picture (PIP)

You can display a sub picture within the main picture of set programme or video input. In this way, you can watch the picture of set pro­gramme or video input from any connected equipment while watching the main picture.
1. Press the MENU button to display the menu. Press the  or button to select “Picture”, then press the ENTER button.
2.
Press the or button to select “PIP”, then press the
3. Press the ENTER button again. Press the  or  button to select “On”, then press ENTER button.
If the PIP is activated, the size of the main picture turns to “16:9”.
4. Press the  or button to select “Source”,
Press the PIP button on the remote control repeatedly to activate or deactivate the “PIP”.
then press ENTER button. Select a source of the sub picture by pressing the  or  button and press the ENTER button.
The sub picture can serve different source selections based on what the main picture is set to.
5. Press the  or button to select “Swap”. To interchange the main picture and the sub picture, select “Swap” option and press the ENTER button.
The main picture and the sub picture are interchanged. I
f main picture is in “PC” mode, “Swap” is not available.
6. Press the  or button to select “Size” of the sub picture and then press the ENTER button. Select a size of the sub picture by pressing the  or  button and then press the ENTER button.
If main picture is in “PC” mode, “Size” is not available.
7. Press the  or button to select “Position”, then press the ENTER button. Select the position of the sub picture by pressing the or button and then press the ENTER button.
8. Press the  or button to select “Programme” and then press the ENTER button. You can select the channel that you want to view through sub picture by pressing the or button. Press the ENTER button.
The “Programme” can be active when the sub picture is set to TV.
9. Press the EXIT button to exit.
You may notice that the picture in the PIP window becomes slightly unnatural when you use
the main screen to view a game or karaoke.
Source: Used to select a source of the sub picture.  Swap: Used to interchange the main picture and the
sub picture.
PIP Settings
Sub
TV
Ext.1 Ext.2
AV
S-Video
PC HDMI1 HDMI2
TV
X X X X X X O O O
Main
Component
(O: PIP operates, X: PIP doesn’t operate)
Ext.1
Ext.2
X
X
X
X
X
X
X
X
X
X
X
X
O
O
O
O
O
O
ENTER
Size: Used to select a size of the sub picture.  Position: Used to move the sub picture.  Programme: Used to Change the sub picture.
AV
S-Video X X X X X X O O O
Component X X X X X X X O O
PC X X X X X X X O O
X X X X X X X X X
button.
HDMI1
HDMI2
O
O
O
O
O
O
O
O
O
O
O
O
X
X
X
X
X
X
English-16

Changing the Sound Standard

You can select the type of the special sound effect to be used when watching a given broadcast.
1. Press the MENU button to display the menu. Press the  or button to select “Sound”, then press the ENTER button.
2. Press the
3. Select the required sound effect by pressing the or button repeatedly
and then press the ENTER button.
4. Press the EXIT button to exit.
You can also select these options by
simply pressing the S.MODE button on the remote control.
Standard: Selects the normal sound mode.  Music: Emphasizes music over voices.  Movie: Provides live and full sound for movies.  Speech: Emphasizes voices over other sounds.

Adjusting the Sound Settings

The sound settings can be adjusted to suit your personal preferences.
1. Press the MENU button to display the menu. Press the  or button to select “Sound”, then press the ENTER button.
2. Press the or button to select “Equalizer”, then press the ENTER button.
3.
Press the
Press the
4. Press the  or button to reach the required setting. Press the ENTER button.
5. Press the EXIT button to exit.
If you make any changes to these settings, the Sound Mode is automatically switched to
“Custom”.
ENTER button again, to select “Mode”.
Custom: Selects your custom sound settings. (Refer to “Adjusting the Sound Settings”)
or button
ENTER
to select a particular item.
button.

Setting the TruSurround XT (SRS TSXT)

TruSurround XT is a patented SRS technology that solves the problem of playing
5.1 multichannel content over two speakers. TruSurround delivers a compelling,virtual surround sound experience through any two-speaker playback systems, including internal television speakers. It is fully compatible with all multichannel formats.
1. Press the MENU button to display the menu. Press the  or button to select “Sound”, then press the ENTERbutton.
2. Press the or button to select “SRS TSXT”, then press the ENTER button.
3.
Press the or button to select “On” or “Off”. Press the
4. Press the EXIT button to exit.
You can also set these options simply by pressing the SRS button on remote control.
TruSurround XT, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc.
English-17
ENTER
button.

Adjusting the Volume Automatically

Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. This feature allows you to automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
1. Press the MENU button to display the menu. Press the  or button to select “Sound”, then press the ENTER
2. Press the or button to select “Auto Volume”, then press the ENTER
3.
Press the or button to select “On” or “Off”. Press the
4. Press the EXIT button to exit.

Selecting the Internal Mute

If you want to hear the sound through separate speakers, cancel the internal amplifier.
1. Press the MENU button to display the menu. Press the  or button to select “Sound”, then press the ENTER
2. Press the  or button to select “Internal Mute”, then press the ENTER
Press the or button to select “On” or “Off”. Press the
3.
4. Press the EXIT button to exit.
When “Internal Mute” is set to “On’, the Sound menus except for
“Sound Select” (in PIP mode) cannot be adjusted.
button.
button.
ENTER
ENTER
button.
button.
button.
button.

Listening to the Sound of the Sub Picture

During the PIP features activation, you can listen to the sound of the sub pic­ture.
1. Press the MENU button to display the menu. Press the  or button to select “Sound”, then press the ENTER button.
2. Press the or button to select “Sound Select”, then press the ENTER button.
3. Press the or button to select “Sub”. Press the ENTER button.
4. Press the EXIT button to exit.
 Main: Used to listen to the sound of the main picture.
Sub: Used to listen to the sound of the sub picture.
You can select this option when the “PIP” is set to “On”.
English-18

Resetting the Sound Settings to the Factory Defaults

If Game Mode is On, the Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults.
1. Press the MENU button to display the menu. Press the  or button to select “Sound”, then press the ENTER button.
2. Press the or button to select “Reset”, then press the ENTER button.
3. Press the EXIT button to exit.
You can select this option when the “Game Mode” is set to “On”.

Connecting Headphones

You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room.
When you insert the head set jack into the corresponding port, you can operate only "Internal Mute" and "Sound Select" (in PIP mode) in Sound menu. (Refer to “Selecting the Internal Mute” on page 18)
Prolonged use of headphones at a high volume may damage your hearing. You will not receive sound from the speakers when you connect headphones to the system.

Selecting the Sound Mode

You can set the sound mode by pressing the “DUAL” button. When you press it, the current sound mode is displayed on the screen.
Audio Type
You can also set these options
simply by pressing the DUAL button on remote control.
FM
Stereo
NICAM
Stereo
Mono Stereo
Dual Mono Stereo
Dual
DUAL 1/2
MONO STEREO MONO DUAL 1 DUAL 2
MONO MONO STEREO
MONO DUAL 1
DUAL 2
Default
Automatic
change
DUAL 1
Automatic
change
DUAL 1

Setting and Displaying the Current Time

You can set the TV’s clock so that the current time is displayed when you press the INFO button. You must also set the time if you wish to use the automatic On/Off timers.
1. Press the MENU button to display the menu. Press the  or button to select “Setup”, then press the ENTER button.
Press the or button to select “Time”, then press the
2.
3. Press the ENTER button to select “Clock Set”.
4.
To. ..
Move to “Hour” or “Minute” Set the “Hour” or “Minute” Press the ENTER button.
5. Press the EXIT button to exit.
If you disconnect the power cord, you have to set the clock again.
You can also set hour and minute by pressing the number buttons on the remote control.
English-19
ENTER
button.
Press the...
or button.or button.

Setting the Sleep Timer

You can select a time period of between 30 and 180 minutes after which the televi­sion automatically switches to standby mode.
1. Press the MENU button to display the menu. Press the  or button to select “Setup”, then press the ENTER button.
2.
Press the or button to select “Time”, then press the
3. Press the or button to select “Sleep Timer”, then press the ENTER button.
4. Press the or button repeatedly until the desired time appears
(Off, 30, 60, 90, 120, 150, 180). Press the ENTER button.
Press the SLEEP button on the
remote control repeatedly until the appropriate time interval appears.
5. Press the EXIT button to exit.
The TV automatically switches to standby mode when the timer reaches 0.

Switching the Television On and Off Automatically

You can set the On/Off timers so that the set will:
Switch on automatically and tune to the channel of your choice at
the time you select.
Switch off automatically at the time you select.
The first step is to set the television’s clock.
1. Press the MENU button to display the menu. Press the  or button to select “Setup”, then press the ENTER
2. Press the or button to select “Time”, then press the ENTER
3. Press the or button to select “On Timer”, then press the ENTER
4. Press the or button to adjust “Hour”, then press the button to
move to the next step. Set other items using the same method as above. When finished, press the ENTER button to return.
5. Press the or button to select “Off Timer”, then press the ENTER
6. Press the or button to adjust “Hour”, then press the button to
move to the next step. Set other items using the same method as above. When finished, press the ENTER
7. Press the EXIT button to exit.
You can also set hour and minute by pressing the number buttons on the remote control. The "Activation" setting must be set to "Yes" in order for the timers to work.
button.
button to return.
ENTER
button.
button.
button.
button.
English-20

Choosing Your Language

Using Game Mode

When you start using your set for the first time, you must select the language which will be used for displaying menus and indications.
1. Press the MENU button to display the on-screen menu. Press the  or  button to select “Setup”, then press the
2. Press the  or button to select “Language”, then press the
ENTER button.
ENTER button.
3. Select a particular language by pressing the  or button repeatedly. Press the
ENTER button.
You can choose one of 21 languages.
4. Press the EXIT button to exit.
When connecting to a game console such as PlayStationTM or XboxTM, you can enjoy a more realistic gaming experience by selecting game menu.
1. Press the MENU button to display the menu. Press the  or button to select “Setup”, then press the ENTER button.
2. Press the  or button to select “Game Mode”, then press the ENTER button.
3.
Press the or button to select “On” or “Off”. Press the
ENTER
button.
4. Press the EXIT button to exit.
To disconnect the game console and connect another external device, set Game to Off in the
setup menu.
If you display the TV menu in Game mode, the screen shakes slightly.
Game Mode is not available in TV mode.
If Game Mode is On:
• Picture Mode and Sound Mode are automatically changed to Custom and users can not change the mode.
• Adjust the sound using the equalizer.
• The Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults.
English-21

Setting the Blue Screen Mode / Selecting the Melody

Blue Screen: If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor pic­ture, you must set the "Blue Screen" mode to "Off".
Melody: You can hear melody sound when the television is powered on or off.
1. Press the MENU button to display the menu. Press the  or button to select “Setup”, then press the ENTER button.
2. Press the  or button to select “Blue Screen” or “Melody”. Press the ENTER button.
3.
Press the or button to select “On” or “Off”.
Press the
ENTER
button.
4. Press the EXIT button to exit.

Using the Energy Saving Feature

This function adjusts the brightness of the TV so as to reduce power consumption. When you watching TV at night, set the "Energy Saving " mode option to "High" so as to reduce the dazzling of your eyes as well as the power consumption.
1. Press the MENU button to display the on-screen menu. Press the  or  button to select “Setup”, then press the
2. Press the  or button to select “Energy Saving”, then press the
3. Select the required option (Off, Low, Medium, High) by pressing the  or  button. Press the
4. Press the EXIT button to exit.
ENTER button.
ENTER button.
ENTER button.

Setting the Blue Eye

You can set the power of Blue LED to be on. If the power is off when Blue Eye TV is off, the Blue LED goes off. This will save power and reduce eye fatigue.
1. Press the MENU button to display the on-screen menu. Press the  or  button to select “Setup”, then press the
ENTER button.
2. Press the  or button to select “Blue Eye”, then press the
3.
Press the or button to select “On” or “Off”. Press the
On: LED(Blue) will come on after you turn the TV off.
ENTER button.
Off: LED(Blue) will not come on.
ENTER
button.
4. Press the EXIT button to exit.
English-22

Selecting the Source

You can select among external sources connected to your TV’s input jacks.
1. Press the MENU button to display the menu. Press the ENTER button, to select “Input”.
2. Press the
activated in the “Source List”. “AV”, “S-Video”, “Component”, “PC”, “HDMI1” , “HDMI2” are activated only when they are connected to your set.
3. Select the required device by pressing the  or button. Press the ENTER button.
Press the SOURCE button on the remote control to toggel between all the available source.
TV mode can be selected by pressing the TV button, number buttons(0~9), and the
P
/
You can select PC mode by simply pressing the PC button on the remote control.

Editing the Input Source Names

Name the device connected to the input jacks to make your input source selec­tion easier.
1. Press the MENU button to display the menu. Press the ENTER button, to select “Input”.
2. Press the or button to select “Edit Name”, then press the ENTER button.
3. Press the or button to select the device that you wish to edit.
Press the ENTER
4. Press the  or button to select the required device. Press the ENTER button.
5. Press the EXIT button to exit.
ENTER button again, to select “Source List”.
When no external device is connected to your set, only “TV”, “Ext.1”, “Ext.2” are
button on the remote control. But it cannot be selected using the SOURCE button.
button.
English-23

Using the WISELINK Function

You can view stored photos (JPEG files) or play music files (MP3) using a memory card or USB storage media.
The "Photo" menu supports image files in the JPEG format only. The "Music" menu supports sound files in the MP3 format only.
Compact Flash (CF) / Micro Driver (MD) / MAGICSTOR
Secure Digital Card (SD Card) / Smart Media Card (SM) /
Multimedia Card (MMC) / Memory Stick / MSPRO / XD
USB Mass Storage Class
The USB hub type is not available becuase using the Half-Speed USB can cause the hardware limitation. (Only the Full-Speed USB is available.)
Photo Printer
1. First, connect the memory card or USB storage media containing your files to the WISELINK terminal on the side of the TV.
Supported Memory Cards
Compact Flash (CF) Micro Driver (MD) MAGICSTOR Secure Digital Card
Multimedia Card (MMC) Memory Stick MSPRO XD
Some types of Memory Cards or USB hosts, depending on the manufacturer, may not be supported.
2. Using the Remote Control Button in WISELINK Menu
Button Operations
Move the cursor and select an item.
Select the currently selected item.
Play or pause the Slide Show or MP3 file.
Stop the current function and return to the previous high-level menu.
Run various functions from the Photo and Music menus.
Stop the current slide show or MP3 file.
Page Up or Down (file list item)
Return to the previous menu
English-24
(SD Card)
Smart Media Card

Using the WISELINK Menu

This menu shows JPEG and MP3 files and folders saved on a memory card.
1. Press the MENU button to display the menu. Press the ENTER button, to select “Input”.
2. Press the  or button to select “WISELINK”, then press the ENTER button.
is correctly inserted into the WISELINK terminal on the side of the TV.
3. Press the  or button to select the corresponding Memory Card, then press the ENTER button.
Memory Card will be displayed.
4. Press the  or button to move to an item, then press the ENTER button.
5. To exit WISELINK, press the WISELINK button on the remote control.
You can select these options by simply pressing the WISELINK button on the remote control.

Using the PHOTO (JPEG) List

This menu shows JPEG files and folders saved on a memory card.
1. Complete Steps 1 to 4 of "Using the WISELINK Menu".
2. Press the or button to select “Photo”, then press the ENTER button.
3. Press the ,, and  buttons to select a file, then press the ENTER button.
photo in full screen.
4. Press the INFO button to configure the options.
"View", "Slide Show", "Copy", "Copy All files", "Delete", "Delete All Files", "Print"
folder icon
photo icon
Move to the previous folder stage icon
When a full screen is displayed: "Slide Show", "Rotate", "Zoom", "Copy", "Delete", "Print", "List"
5. To exit WISELINK, press the WISELINK button on the remote control.
At this point, the icon will appear at the top left of the screen.
• This menu only shows files whose file extension is JPEG. Files of other formats such as bmp or tiff will not be displayed.
• The files are displayed on a page. 15 thumbnail photos are displayed per page.
• Folders are displayed first and they are followed by all JPEG files in the current folder. The folders and JPEG files are sorted in alphabetical order.
If the "Insert memory cards." message is displayed, check whether the memory card
A menu for selecting the format of the files saved on the selected
The saved file information is displayed as a folder or file.
Pressing the button over a photo icon shows the currently selected
Pressing the button over a folder icon shows the JPEG files included in the folder.
The Menu is displayed. Select the View option to display a photo in the aspect ratio.
When the Photo List screen is displayed:
• Moving to another photo may take a few seconds to load the file.
The thumbnails are numbered from left to right and from top to bottom, from 1 to 15.
You can select these options by simply pressing the WISELINK button on the remote control.
English-25
Using the Options Menu
"Slide Show":
Starts a slide show.
(Refer to “Selecting a Photo and Slide Show” on page 27)
"Rotate":
You can rotate images in full screen mode. Images are rotated in the order of 90°, 180°, 270° and 0° (original state).
(Refer to “Rotating” on page 28)
You cannot save a rotated image.
"Zoom":
You can zoom into images in full screen mode. Images are zoomed in on in the order of X2, X3, X4 and X1 (original size).
(Refer to “Zooming-in” on page 29)
You cannot save a zoomed-in on image.
"Copy", "Copy All files":
You can copy image files to a different memory card.
(Refer to “Copying Image Files” on page 30)
"Delete", " Delete All Files":
You can delete selected image files.
(Refer to “Deleting Image Files” on page 30)
"Print":
You can print image files directly with your printer.
(Refer to “Printing a Photo” on page 31)
"List":
Displays the stored files and folders and file info.
The “File Error” message appears on the screen in the following situations:
When the file actually has an error
If the target memory cannot be writtien to when copying files
If the target memory has not enough space when copying files
English-26

Viewing Photo File Information

When selecting a photo file, the photo file information is displayed on the left in the TV screen, such as the resolution, the date modified and the order of the file in the current directory.

Selecting a Photo and Slide Show

This menu shows JPEG files and folders saved on a memory card.
1. Complete Steps 1 to 4 of "Using the WISELINK Menu". (Refer to page 25)
2. Press the  or button to select “Photo”, then press the ENTER button.
The saved file information is displayed as a folder or file.
3. Press the INFO button.
4. Press the or
The Menu is displayed. Select the View option to display a photo in the aspect ratio.
• Slide Show all files in the selected folder at a predetermined interval.
• During the Slide Show, files are displayed in order from the currently shown file.
5. Press the INFO button during “Slide Show” to set the option ("Speed", "Background Music, "Background Music Setting", "List"). Press the
6. To change the sub option, press the INFO button again to open the options
You can select these options by simply pressing the WISELINK button on the remote control.
window and select option you want to change, then press the ENTER button. Whenever you do this, the sub option on the screen is changed.
7. To exit WISELINK, press the WISELINK button on the remote control.
If the Slide Show feature is selected when a photo is displayed in full screen,
other photos are also in the full screen size during the Slide Show.
Such as the resolution File size Date modified Order of the file in the current directory
button to select “Slide Show”, then press the ENTER button.
or
button to select the option, then press the
ENTER
button.
Using the Menu during a Slide Show
Normal
"Speed":
Select to control the slide show speed. Press the ENTER button to select the option "Normal", "Slow", or "Fast".
When the Speed feature is set to the Fast option, usually it takes about 7 seconds to slide to
the next photo. The loading time may be longer depends on the size of the file.
On
"Background Music":
Select to determine whether to play an MP3 file during a slide show. Press the ENTER button to select the option "On" or "Off".
Set the Background Music Seetings first to use the “On” or “Off ” function in this menu.
English-27

Rotating

You can select these options by simply pressing the WISELINK button on the remote control.
"Background Music Setting":
The saved file information is displayed as folder or MP3 file.
1. Select the "Background Music Settings" and press the ENTER button. Navigate to the folder that contains the MP3 files to use as the background music. Select an MP3 file and press ENTER button.
The selected file is displayed in yellow.
2. MENU button again to return to the Slide Show screen. The selected background music is played.
• If you turn Off the Background Music, even if the Background Music Settings
have been set up, the background music will not be played.
• MP3 files can be automatically played during the Slide Show if the Default Background Music is set to On. To enable this function, MP3 files and other photo files must be located in the same folder.
"List":
Displays the stored files and folders and file info.
Displays a 90°, 180°, or 270° rotated image in full screen mode.
1. Complete Steps 1 to 4 of "Using the WISELINK Menu". (Refer to page 25)
2. Press the  or button to select “Photo”, then press the ENTER button.
The saved file information is displayed as a folder or file.
3. Press the ,, and buttons to select a file, then press the ENTER button.
Pressing the button over a photo thumbnail displays the photo in full screen.
The Menu is displayed. Select the View option to display a photo in the aspect ratio.
4. Press the INFO button to display the option ("Slide Show", "Rotate", "Zoom", "Copy", "Delete", "Print", "List"). Press the  or  button to select “Rotate”, then press the ENTER button. Press the ENTER button to select the option (90°, 180°, 270°, 0°(Original)) To rotate a photo, press the INFO button to open the options window, select the “Rotate” option and press the ENTER button. Whenever you do this, the photo on the screen is gradually rotated.
5. To exit WISELINK, press the WISELINK button on the remote control.
The rotated file is not saved. This feature is also available for the photo in the aspect ratio.
The Rotating function information
Current OSD
English-28
Function
To rotate a photo by 90 degrees
To rotate a photo by 180 degrees
To rotate a photo by 270 degrees
To rotate a photo by original
Loading...
+ 239 hidden pages