Samsung LE32M8 User Manual

LCD TV
LE32 M8
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Ota yhteyttä Samsungiin
Jos sinulla on kysymyksiä tai kommentteja koskien Samsung tuotteita voitte ottaa yhtyettä Samsung tukeen.
Kontakta SAMSUNG
Om du har några frågor eller synpunkter om Samsungs produkter, är du välkommen att kontakta Samsung Support.
Country
BELGIUM 02 201 2418 www.samsung.com/be CZECH REPUBLIC 844 000 844
DENMARK 70 70 19 70 www.samsung.com/dk FINLAND 030-6227 515 www.samsung.com/fi FRANCE 3260 SAMSUNG(7267864) (€ 0,15/min) www.samsung.com/fr GERMANY 01805-121213 (€ 0,14/Min) www.samsung.de HUNGARY 06-80-SAMSUNG (7267864) www.samsung.com/hu ITALIA 800 SAMSUNG(7267864) www.samsung.com/it LUXEMBURG 0032 (0)2 201 24 18 www.samsung.lu NETHERLANDS 0900 20 200 88 (€ 0,10/Min) www.samsung.com/nl NORWAY 815-56 480 www.samsung.com/no POLAND 0 801 801 881 www.samsung.com/pl PORTUGAL 80 8 200 128 www.samsung.com/pt REPUBLIC OF IRELAND 0818 717 100 SLOVAKIA 0800-SAMSUNG (7267864) www.samsung.com/sk SPAIN 902 10 11 30 www.samsung.com/es SWEDEN 0771-400 200 www.samsung.com/se SWITZERLAND 0800-7267864 www.samsung.com/ch U.K 0870 SAMSUNG (7267864) www.samsung.com/uk ESTONIA 800-7267 www.samsung.ee LATVIA 800-7267 www.samsung.com/lv LITHUANIA 8-800-77777 www.samsung.lt KAZAKHSTAN 8 800 080 1188 www.samsung.kz RUSSIA 8-800-200-0400 www.samsung.ru UKRAINE 8-800-502-0000 www.samsung.com/ur UZBEKISTAN 140-1234 www.samsung.uz
Customer Care Centre
“Distributor pro Českou republiku: Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4”
www.samsung.com/cz
www.samsung.com/uk
Web Site
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PICTURE IN PICTURE (PIP)
BN68-01186P-00
TELETEXT
This product is only applicable in Finland. Its quality is not guaranteed in other countries.
Den här produkten är endast tillämplig i Finland. Dess kvalitet garanteras inte i andra länder.
Tämä tuote soveltuu vain Suomessa. Sen laatua ei taata muissa maissa
Register your product at www.samsung.com/global/register
Record your Model and Serial number here for future reference.
▪ Model _______________ ▪ Serial No. _______________
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of
• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.
© 2007 Samsung Electronics Co., Ltd. All rights reserved.

Contents

CONNECTING AND PREPARING YOUR TV
List of Parts ........................................................ 3
Installing the Stand ............................................. 3
Installing the Wall Mount Kit ............................... 3
Viewing the Control Panel .................................. 4
Viewing the Connection Panel ........................... 5
Viewing the Remote Control ............................... 7
Installing Batteries in the Remote Control .......... 8
Switching On and Off ......................................... 8
Placing Your Television in Standby Mode........... 8
Plug & Play ......................................................... 9
SETTING THE SOUND
Changing the Sound Standard ......................... 22
Adjusting the Sound Settings ........................... 23
Setting the TruSurround XT (SRS TS XT) ........ 23
Connecting Headphones .................................. 24
Selecting the Sound Mode ............................... 24
Adjusting the Volume Automatically ................. 24
Selecting the Internal Mute .............................. 25
Listening to the Sound of the Sub Picture ........ 25
Resetting the Sound Settings to the Factory
Defaults ............................................................ 26
English
SETTING THE CHANNELS
Storing Channels Automatically ....................... 10
Storing Channels Manually ...............................11
Setting the Channel Lists ................................. 12
Activating the Child Lock .................................. 12
Sorting the Stored Channels ............................ 13
Assigning Channels Names ............................. 13
Fine Tuning Channel Reception ....................... 14
SETTING THE PICTURE
Changing the Picture Standard ........................ 14
Adjusting the Custom Picture ........................... 15
Changing the Colour Tone................................ 15
Activating Backlight .......................................... 16
Conguring Detailed Settings on the Picture ... 17
Changing the Picture Size ................................ 18
Freezing the Current Picture ............................ 19
Selecting the Screen Mode .............................. 19
Resetting the Picture Settings to the
Factory Defaults ............................................... 19
Digital NR / Active Colour / DNIe / Movie Plus 20
Viewing the Picture In Picture (PIP) ................. 21
HDMI Black Level ............................................. 22
SETTING THE TIME
Setting and Displaying the Current Time .......... 26
Setting the Sleep Timer .................................... 27
Switching the Television On and Off
Automatically .................................................... 27
FUNCTION DESCRIPTION
Choosing Your Language ................................. 28
Using Game Mode ........................................... 28
Setting the Blue Screen Mode / Selecting the
Melody ............................................................. 29
Setting the Home Theatre PC .......................... 29
Using the Energy Saving Feature .................... 30
Selecting the Source ........................................ 31
Editing the Input Source Names ...................... 31
English - 1
USING THE DTV FEATURE
Previewing the DTV Menu System .................. 32
Updating the Channel List Automatically .......... 33
Updating the Channel List Manually ................ 33
Editing Your Favourite Channels ...................... 34
Selecting Channel List ..................................... 36
Displaying Programme Information .................. 36
Viewing the EPG
(Electronic Programme Guide) Information ...... 37
Using the Scheduled List ................................. 38
Setting the Default Guide ................................. 38
Viewing All Channels and
Favourite Channels .......................................... 39
Adjusting the Menu Translucency .................... 40
Setting up the Parental Lock ............................ 40
Setting the Subtitle ........................................... 41
Setting the Subtitle Mode ................................. 41
Selecting the Audio Format .............................. 41
Selecting the Digital Text (UK only) ................. 42
Selecting the Time Zone (Spain only) .............. 42
Viewing Product Information ............................ 42
Checking the Signal Information ...................... 43
Upgrading the Software ................................... 43
Viewing Common Interface .............................. 44
Selecting the CI (Common Interface) Menu ..... 44
Resetting .......................................................... 45
Selecting the Preferred Language
(Subtitle , Audio or Teletext) ............................. 45
Preference ........................................................ 46
USING THE TELETEXT FEATURE
Teletext Decoder .............................................. 46
Displaying the Teletext Information .................. 47
Selecting a Specic Teletext Page ................... 47
Using Fastext to Select a Teletext Page........... 48
Setting Up Your Remote Control ...................... 48
Remote Control Codes ..................................... 49
SETTING THE PC
Setting up Your PC Software
(Based on Windows XP) .................................. 52
Display Modes .................................................. 52
Setting the PC .................................................. 53
ABOUT ANYNET
What is Anynet+? ............................................ 54
Connecting Anynet+ Devices ........................... 54
Setting Up Anynet+ .......................................... 55
Scanning and Switching between Anynet+
Devices ............................................................ 55
Recording ......................................................... 56
Listening through a Receiver ........................... 57
Check Points before Requesting Service ......... 57
+
RECOMMENDATIONS FOR USE
Using the Anti-Theft Kensington Lock .............. 58
Troubleshooting: Before Contacting Service
Personnel ......................................................... 58
Technical and Environmental Specications ... 59
Symbol Press Important Note One-Touch
English - 2
Button

List of Parts

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
M4 X L16
Remote Control
& Batteries
(AAA x 2)
Owner’s Instructions
Warranty card / Safety Guide /
Power Cord Cover-Bottom
Warranty card
Registration Cards (Not available in all locations)
Stand Screw
X 4
Safety Guide

Installing the Stand

Stand Cleaning Cloth
Registration Cards
< 2 >
1. Place the TV faced down on a soft cloth or cushion on a table.
2. Put the stand into the hole at the bottom of the TV.
Insert screw into the hole indicated and tighten.
3.

Installing the Wall Mount Kit

Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.
Do not install your Wall Mount Kit while your TV is on. This may result in personal injury due to electric shock.
Remove the stand and cover the bottom hole with a
cap and fasten with two screws.
English - 3
< 3 >

Viewing the Control Panel

1 2
3
4
56
The product colour and shape may vary depending on the model.
1 SOURCE Toggles between all the available input sources (TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI1, HDMI2, HDMI3, DTV). In the on-screen menu, use this button as you use the ENTER/OK button on the remote control.
2 MENU Press to see an on-screen menu of your TV’s features. In case of DTV mode, the DTV menu appears.
3 Press to decrease or increase the volume. In the on-screen menu, use the buttons as you use the  and  buttons on the remote control.
4 Press to change channels. In the on-screen menu, use the buttons as you use the 5 and 6 buttons on the remote control. (Without the Remote Control, you can turn on the TV by using the Channel buttons.)
5 Speakers
(Power)
6
Press to turn the TV on and off. Power Indicator
Blinks and turns off when the power is on and lights up in stand-by mode.
Remote Control Sensor
Aim the remote control towards this spot on the TV.
English - 4

Viewing the Connection Panel

1 2 3 4
5
3
6
Power Input
7890!@
The product colour and shape may vary depending on the model.
Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable.
1 Connecting Set-Top Box, VCR or DVD
Connector
EXT 1 EXT 2
Video
o o
Input Audio (L/R)
o o
RGB
o
Output
Video + Audio (L/R)
Only TV or DTV output is available.
Output you can choose.
-Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players. 2 Connecting AUDIO
- Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio in connectors on the Amplifier or DVD Home Theater.
3 HDMI IN 1,HDMI IN 2, HDMI IN 3
- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)
- No additional Audio connection is needed for an HDMI to HDMI connection. What is HDMI?
- “High Definition Multimedia interface” allows the transmission of high definition digital video data and multiple channels of digital audio (5. 1 channels).
- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio. DVI IN (HDMI 2) (AUDIO R/L)
- When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure that it has been set to a compatible video output mode as shown in the table below. Failure to observe this may result in picture distortion, image breakup or no picture.
- When using an HDMI/DVI cable connection, it is only possible from the HDMI 2 terminal. You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the “R - AUDIO - L” terminal on DVI for sound output. Supported modes for HDMI/DVI and Component
HDMI/DVI 50Hz HDMI/DVI 60Hz
Component
480i
X X O
480p
X O O
576i
X X O
576p
O X O
720p
O O O
1080i
O O O
English - 5
4 Connecting an Aerial or Cable Television Network To view television channels correctly, a signal must be received by the set from one of the following
sources:
- An outdoor aerial / A cable television network / A satellite network
5 Connecting CI (Common Interface) CARD
- When not inserting "CI CARD" in some channels,"Scrambled Signal" is displayed on the screen.
- The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.
- When the channel information configuration has finished, the message "Updating Completed" is displayed, indicating that the channel list is now updated. You must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD may cause damage to it. Insert the CI-Card in the direction marked on it.
7 Connecting External A/V Devices
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corre sponding audio out connectors on the A/V device.
- Headphone may be connected to the headphone output (
6) on the rear of your set. While the
head phone is connected, the sound from the built-in speakers will be disabled. 8 Connecting Computer
- Connect the D- Sub cable (optional) to "PC (PC IN)" on the rear of your set and the other end to the Video Card of your computer.
- Connect the stereo audio cable (optional) to "AUDIO (PC IN)" on the rear of your set and the other end to "Audio Out" of the sound card on your computer.
9 DIGITAL AUDIO OUT (OPTICAL)
- Connect to a Digital Audio Component. 0 SERVICE
- Service connection for qualified service engineer. ! Connecting Component Devices (DTV/DVD)
- Connect component video cables (optional) to component connector ("P your set and the other ends to corresponding component video out connectors on the DTV or DVD.
", "PB", "Y") on the rear of
R
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("PR", "PB", "Y") on your set.
- The P
, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y,
R
B-Y and R-Y or Y, Cb and Cr.
- Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD.
- This LCD TV displays its optimum picture resolution in 720p mode.
- This LCD TV displays its maximum picture resolution in 1080i mode.
@ Kensington Lock
- The Kensington lock (optional) is a device used to physically fix the system when used in a public place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The place of the Kensington Lock may be different depending on its model.
English - 6

Viewing the Remote Control

1 Selects a target device to be controlled by the Samsung remote control (TV, DVD, STB, CABLE, VCR) (Refer to page 49~51)
2 Television Standby button 3 Number buttons for direct
channel access
4
One/Two-digit channel
selection 5 It display "Channel List"
on the screen. 6 Selects the TV and DTV
mode directly 7 VCR/DVD Functions
Rewind, Stop, Play/Pause, Fast/Forward
8 Volume increase Volume decrease
9 Temporary sound switch-off 0 Menu display and
change confirmation ! Returns to the previous
menu # Electronic Program Guide
(EPG) display
$ Picture size selection % Sound effect selection ^
Adjusts 5 separate devices
- TV, DVD, STB, CABLE, or
VCR
.
& When pressing this button, a number of buttons on the remote control (e.g. Selects a target device, volume, channel buttons) light up
for a few seconds and then turn off to save power. This function is to conveniently use the remote control at night or when dark.
* Available source selection ( Previous channel ) DTV menu display a Records for Live
Broadcasting (Anynet+ function only)
(Refer to page 56)
b P : Next channel P
: Previous channel
c Exit the OSD d Control the cursor in the
menu e Use to see information on
the current broadcast f Runs the Anynet view
functions and sets up Anynet devices.
g Colour buttons : Press to add or delete channels and to store channels to the favorite channel list in the “Channel List” menu.
h Picture-In-Picture On / Off i Digital subtitle display j Picture effect selection k Picture freeze l When your remote does not
work, change the batteries and press the "RESET" button for 2-3 seconds before use.
Teletext Functions
6 Exit from the teletext display 0 Teletext index @ Alternately select Teletext,
Double, or Mix.
$ Teletext size selection * Teletext mode selection
(LIST/FLOF)
( Teletext sub page b P : Teletext next page
P
: Teletext previous page
c Teletext cancel e Teletext reveal g Fastext topic selection h Teletext hold j Teletext store
The performance of the remote control may be affected by bright light. This is a special remote control for the visually impaired, and has Braille points on the Power,
Channel, STOP, PLAY/PAUSE and Volume buttons.
English - 7

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the
figure.
2. Install two AAA size batteries.
Make sure to match the "+" and "–" ends of the batteries with the
diagram inside the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?

Switching On and Off

The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
The standby indicator lights up on the front of the set.
2. Press the button on the front of the set. You also can press the POWER button or the TV/DTV button on the remote control to turn the TV on. The programme that you were watching last is reselected automatically.
3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or button on the right side of the set. When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.
4. To switch your set off, press the POWER
button again.

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWER button on the remote control.
The screen is turned off and a red standby indicator appears on the front of your set.
2. To switch your set back on, simply press the POWER , numeric buttons (0~9), TV/DTV button or channel up/down ( / ) button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial.
English - 8

Plug & Play

When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available.
Any functions related to Digital TV (DVB) will only work in
countries or areas where DVB-T (MPEG2) digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with the future coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not be available in some countries. This product is only applicable to Finnish broadcasts. Broadcasts are not supported in other countries.
1. Press the POWER button on the remote control. The message "Start Plug & Play" is displayed with "OK" selected.
2. Select the appropriate language by pressing the ▲ or ▼ buttons. Press the ENTER/OK
button to confirm your choice.
3. Press the ◄ or ► buttons to select “Shop” or “Home”, then the ENTER/OK button. We recommend setting the TV to Home mode for the best picture in your home environment. Shop mode is only intended for use in retail environments. If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode, press the Volume button and then hold down the
MENU button for five seconds on the side
panel of the TV.
4. The message "Check antenna input." is displayed with "OK" selected. Press the ENTER/OK
button.
Please check that the antenna cable is connected correctly.
5. Select the appropriate country by pressing the Press the ENTER/OK
6.
The "Auto Store" menu is displayed with the "Start" selected. Press the
button to confirm your choice.
or ▼ button.
ENTER/OK
The channel search will start and end automatically. The DTV channel scan menu appears and the DTV channel is automatically updated.
If the DTV channel is updated, the Source in the source list of the Input menu is automatically
changed to DTV.
After all the available channels are stored, the "Clock Set" menu appears.
Press the ENTER/OK button at any time to interrupt the memorization process.
For detailed descriptions about DTV channel update, refer to page 33 of this manual. After all the available digital channels are stored, the screen to select a time zone is displayed depending on the country.
7. Press the ENTER/OK button. Select the "Month", "Day", "Year", "Hour", or "Minute" by pressing the Set the "Month", "Day", "Year", "Hour", or "Minute" by pressing the
You can also set the hour and minute by pressing the number buttons on the remote control.
8. Press the ENTER/OK button to confirm your setting.
 Language  Country  Auto Store  Clock Set
: Select your language.
: Select your country.
: Automatically scans for and stores channels available in the local area.
: Sets the current time for the TV clock.
Plug & Play
Start Plug & Play.
OK
Enter Exit
button.
or ► buttons.
or ▼ buttons.
English - 9
If you want to reset this feature...
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
2. Press the ENTER/OK button again, to select "Plug & Play".
3. The message "Start Plug & Play" is displayed.
(Refer to page 9)
TV
Plug & Play Language : English Time
Game Mode : Off
Blue Screen : Off Melody : Off
PC
Home Theatre PC
More
Move Enter Return
: Off
Plug & Play
Start Plug & Play.
OK
Enter Return
Setup
 
Channel
- Storing Channels Automatically
- Storing Channels Manually
TV
Country : Belgium Auto Store Manual Store Channel Manager Sort Name Fine Tune
Move Enter Return

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
2. Press the ENTER/OK button to select "Country".
3. Select the appropriate country by pressing the Press the ENTER/OK button to confirm your choice.
Even though you have changed the country setting in this menu, the country setting for DTV is not
changed. Use the Plug & Play function to change the country setting for DTV. (Refer to page 9)
4. Press the
5. Press the ENTER/OK
or ▼ button to select "Auto Store", then press the ENTER/OK button.
button.
The TV will begin memorizing all of the available channels. Press the ENTER/OK button at any time to interrupt the memorization process and return to the
"Channel" menu.
6. After all the available channels are stored, the "Sort" menu appears.
or ▼ button.
English - 10

Storing Channels Manually

You can store up to 100 channels, including those received via cable networks. When storing channels manually, you can choose: Whether or not to store each of the channels found. The programme number of each stored channel which you wish to identify.
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Manual Store", then press the ENTER/OK button.
3. Press the ENTER/OK
4. To assign a programme number to a channel, find the correct number by pressing the ▲ or ▼
button and then press the ENTER/OK button. You can also set a programme number by pressing number buttons on the remote control.
5. Press the ▲ or ▼ button to select "Colour System", then press the ENTER/OK
6.
Select the colour standard required by pressing the ▲ or ▼ button then, press the ENTER/OK button.
7. Press the ▲ or ▼ button to select "Sound System", then press the ENTER/OK button.
8.
Select the sound standard required by pressing the ▲ or ▼ button, then press the ENTER/OK button.
If there is an abnormal sound or no sound, re-select the sound system required.
9. If you know the number of the channel to be stored, press the ▲ or ▼ button to select "Channel".
Press the ENTER/OK button. Select C (Air channel) or S (Cable channel) by pressing the 5 or 6 button. Press the button to select channel. Select the required number by pressing the ▲ or ▼ button and then press the ENTER/OK button. Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode) You can also set a channel number by pressing number buttons on the remote control.
10.
If you do not know the channel numbers, press the ▲ or ▼ button to select "Search".
Press the ENTER/OK button. Search by pressing the ▲ or ▼ button and then press the ENTER/OK button.
11. Press the ▲ or ▼ button to select "Store". Press the ENTER/OK button to select "OK".
12. Repeat steps 3 to 11 for each channel to be stored.
Programme: Selects a program number for the channel.  Colour System: Sets the colour supporting system.  Sound System: Sets the sound supporting system.  Channel: Selects a channel.  Search: Scans for the frequency value for the channel.  Store: Saves your settings.
button to select "Programme".
button.
English - 11

Setting the Channel Lists

Set the channels according to your preference. You can easily delete, add, or lock the channel you want.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Channel Manager", then press the ENTER/OK button.
3. Press the ENTER/OK button again, to select "Channel List".
4. Press the
5. Press the
button to select " " line.
or ▼ button to select the undesired channel,
then press the ENTER/OK button to cancel.
6. Repeat steps 5 for each channel to be selected or canceled
7. Press the EXIT
button to exit.
" " is active when "Child Lock" is selected to "On".
You can select these options by simply pressing the CH LIST button on the remote control

Activating the Child Lock

This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out video and audio. Child Lock cannot be released using the buttons on the side. Only the remote control can release the Child Lock setting, so keep the remote control away from children.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Channel Manager", then press the ENTER/OK button.
3. Press the the ENTER/OK button.
4. Press the ENTER/OK button.
5. Press the then press the ENTER/OK button.
6. Press the
7. Press the lock, then press the ENTER/OK button.
8. Repeat steps
9. Press the EXIT button to exit.
Select "On" or "Off" in "Child Lock" to easily turn the channels
which selected on " " to be active or inactive.
or ▼ button to select "Child Lock", then press
or ▼ button to select "On" or "Off". Press the
or ▼ button to select "Channel List",
button to select " " line.
or ▼ button to select the channels you want to
7 for each channel to be locked or unlocked.
Channel List
P 1 C3
Prog. 0 C--
1 C3
2 BBC 1 3 C74 4 C75 5 C76 6 S3 7 S4 8 S6
9 S7
Add Lock
Move Enter Page Return
TV
P 2 C4 BBC1
Prog. 0 C-­1 C3
2 BBC 1
3 C74 4 C75 5 C76 6 S3 7 S4 8 S6
9 S7
Add Lock
Move Enter Page Return
Channel Manager
Channel List
Child Lock :
Move Enter Return
Channel Liat
1 / 10
Off
On
1 / 10
English - 12

Sorting the Stored Channels

You can exchange the numbers of two channels, in order to: Modify the numeric order in which the channels have
been automatically stored. Give easily remembered numbers to the channels that you watch most often.
1.
Press the MENU button to display the menu. Press the ▲ or ▼
TV
Country : Belgium Auto Store Manual Store Channel Manager Sort Name Fine Tune
button to select "Channel", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Sort", then press the ENTER/OK button.
3. Select the channel number that you wish to change by press
ing the
or ▼ button repeatedly. Press the ENTER/OK button. The selected channel number and name are moved to right side.
4. Press the
or ▼ button to move to the position in which you
would like to change and then press the ENTER/OK button.
Move Enter Return
TV
Prog. Ch. Name 0 C--
1 C23
2 C16 3 C3 4 S1
Move Enter Return
The selected channel is exchanged with the one previously stored to the chosen number.
5. Repeat steps 3 to 4 for another channel to be sorted.
6. Press the EXIT
button to exit.

Assigning Channels Names

Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Name", then press the ENTER/OK button.
3. If necessary, select the channel to be assigned to a new name by pressing the ▲ or ▼ button. Press the ENTER/OK button. The selection bar is displayed around the name box.
4.
To...
Select a letter, number or symbol Move on the next letter Move back the previous letter Confirm the name
Then...
Press the ▲ or ▼ button Press the ► button Press the ◄ button
Press the ENTER/OK button
The characters available are : Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters ( -, space)
5. Repeat steps
6. Press the EXIT
3 to 4 for each channel to be assigned to a new name.
button to exit.
TV
Country : Belgium Auto Store Manual Store Channel Manager Sort Name Fine Tune
Move Enter Return
TV
Prog. Ch. Name 0 C-- -----
1 C23 -----
2 C16 3 C3 4 S1
Move Enter Return
Channel
Channel
Sort
Name
-----
-----
-----
English - 13

Fine Tuning Channel Reception

Use fine tuning to manually adjust a particular channel for optimal reception.
1. Use the number buttons to directly select the channel that
you want to fine tune.
2. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the
ENTER/OK button.
3. Press the
or ▼ button to select "Fine Tune", then press
the ENTER/OK button.
4. Press the Press the ENTER/OK button.
5. Press the EXIT
or ► button to adjust the fine tuning.
button to exit.
Fine tuned channels that have been saved are marked with an asterisk "*" on the right-hand side of the channel number in the channel banner. And the channel number turns red.
To reset the fine-tuning, select "Reset" by pressing the ▲ or ▼ button and then press the ENTER/OK button.

Changing the Picture Standard

You can select the type of picture which best corresponds to your viewing requirements.
1. Press the MENU button to display the menu. Press the ENTER/OK button, to select "Picture".
2. Press the ENTER/OK button again, to select "Mode".
3. Press the Press the ENTER/OK button.
4. Press the EXIT
The Picture mode must be adjusted separately for each input source.
You can return to the factory defaults picture settings by selecting the "Reset". (Refer to "Resetting the Picture Settings to the Factory Defaults" on page 19)
or ▼ button to select the desired picture effect.
button to exit.
Dynamic: Selects the picture for high-definition in a bright room.
Standard: Selects the picture for optimum display in a normal environment.
Movie: Selects the picture for comfortable display in a dark room.
Fine Tune
Reset
Channel
Picture
Picture
Dynamic
Standard
0
Movie
TV
Country : Belgium Auto Store Manual Store Channel Manager Sort Name Fine Tune
Move Enter Return
P 1
Adjust Save Return
TV
Mode : Dynamic Contrast Brightness 45 Sharpness 75 Colour
Tint G50 R50
Colour Tone : Cool1
Detailed Settings
Backlight : 10 More
Move Enter Return
TV
Mode : Dynamic
Contrast Brightness 45 Sharpness 75 Colour
Tint G50 R50
Colour Tone : Cool1
Detailed Settings
Backlight : 10 More
Move Enter Return
You can also press the P.MODE button on the remote
control to select one of the picture settings.
 
100
55
100
55
English - 14

Adjusting the Custom Picture

Your set has several settings which allow you to control picture quality.
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
2. Press the ▲ or ▼ button to select a particular item. Press the ENTER/OK button.
3. Press the a particular item. Press the ENTER/OK button.
4. Press the EXIT
or ► button to decrease or increase the value of
button to exit.
Contrast: Adjusts the lightness and darkness between objects and the background.  Brightness: Adjusts the brightness of the whole screen.  Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.  Colour: Adjusts the colours, making them lighter or darker. Tint (NTSC or DTV only):
Adjusts the colour of objects, making them more red or green for a more
natural look.
The adjusted values are stored according to the selected Picture mode.
In PC Mode, Only "Contrast" and "Brightness" can be adjusted.
“Tint” function is available only in “HDMI” and “Component” mode.
TV
Mode : Dynamic Contrast 100 Brightness Sharpness 75 Colour
Tint G50 R50
Colour Tone : Cool1
Detailed Settings
Backlight : 10 More
Move Enter Return

Changing the Colour Tone

Picture
45
55
You can select the most comfortable colour tone to your eyes.
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3. (On page 15)
2. Press the 5 or 6 button to select "Colour Tone", then press the ENTER/OK button.
3. Press the
5 or 6 button to select the desired colour tone
setting. Press the ENTER/OKbutton.
4. Press the EXIT
button to exit
Cool2: Makes the colour temperature bluer than "Cool1" menu.
Cool1: Makes whites bluish.  Normal: Keeps whites white.  Warm1: Makes whites reddish.  Warm2: Makes the colour temperature redder than
"Warm1" menu.
TV
Mode : Dynamic Contrast Brightness 45 Sharpness 75 Colour
Tint G50 R50
Colour Tone : Cool1
Detailed Settings
Backlight : 10 More
Move Enter Return
TV
Mode : Dynamic Contrast Brightness 45 Sharpness Colour 55
Tint G50 R50
Colour Tone : Cool1
Detailed Settings
Backlight : 10 More
Move Enter Return
The adjusted values are stored according to the selected Picture mode.
When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be selected.
English - 15
Picture
Picture
Cool 2
Cool 1
Normal
Warm 1 Warm 2
100
55
100
75

Activating Backlight

You can adjust the screen brightness by adjusting the LCD backlight brightness. (0~10)
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3. (On page 15)
2. Press the ▲ or ▼ button to select “Backlight”, then press the ENTER/OK button.
3. Press the ◄ or ► button to decrease or increase the value of
a particular item.
4. Press the ENTER/OK button. Press the EXIT
button to exit.
TV
Mode : Dynamic Contrast 100 Brightness 45 Sharpness Colour 55
Tint G50 R50
Colour Tone : Cool1
Detailed Settings
Backlight : 10 More
Move Enter Return
Backlight
Adjust Return
Picture
75
10
English - 16
Conguring Detailed Settings on the Picture
You can set detailed picture settings.
Press the MENU button to display the menu.
1.
2.
Press the ENTER/OK button, to select "Picture".
3. Press the ▲ or ▼ button to select "Detailed Settings", then
press the ENTER/OK
button.
4. Select the required option by pressing the ▲ or ▼ button,
then press the ENTER/OK
button. Available options: Black Adjust, Dynamic Contrast, Gamma, White Balance, My Colour Control, Edge Enhancement, Colour Space
When you are satisfied with your setting, press the
5.
ENTER/OK button.
Press the EXIT button to exit.
6.
When the picture mode is set to Movie or Standard, Detailed
Settings can be selected.
TV
Mode : Movie Contrast 80 Brightness Sharpness 10 Colour
Tint G50 R50
Colour Tone : Warm2 Detailed Settings Backlight : 0 More
Move Enter Return
TV
Black Adjust : Off Dynamic Contrast Gamma : 0 White Balance My Colour Control Edge Enhancement Colour Space
Move Enter Return
Picture
Detailed Settings
: Auto 
: Off
: Off
If DNIe is Off, the Detailed Settings cannot be selected when
the Picture mode is in Standard mode.
Black Adjust: Off/Low/Medium/High You can directly select the black level on the screen to adjust the screen depth.
Dynamic Contrast: Off/Low/Medium/High You can adjust the screen contrast so that the optimal contrast is provided.
Gamma: -3 ~ +3 You can adjust the middle brightness of pictures.
Press the ◄ or ► button until you reach the optimal setting.
White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset You can adjust the colour temperature for more natural picture colours. R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button. Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults. My Colour Control: Pink/Green/Blue/White/Reset
This setting can be adjusted to suit your personal preferences. Pink/Green/Blue/White: Changing the adjustment value will refresh the adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button. Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted colours will be reset to the factory defaults. Edge Enhancement: Off/On
You can emphasize object boundaries. Colour Space: Auto/Wide
You can set the colour reproduction space for the input signal to Auto or Wide.
45
53
English - 17

Changing the Picture Size

You can select the picture size which best corresponds to your viewing requirements.
1. Press the MENU button to display the menu. Press the ENTER/OK button, to select "Picture".
2. Press the ▲ or ▼ button to select "Size", then press the ENTER/OK button.
3. Select the required option by pressing the
or ▼ button.
Press the ENTER/OK button.
4. Press the EXIT
button to exit.
Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
Wide Zoom: Magnify the size of the picture more than 4:3.  Zoom: Magnifies the 16:9 wide picture (in the vertical direction)
to fit the screen size. 4:3: This is the default setting for a video movie or normal
broadcasting. Just Scan: Displays the input scenes as they are without any
cutoff when HDMI 720p,1080i signals are input.
"Auto Wide" function is available only in "TV", "Ext.1", "Ext.2",
"AV", and "S-Video" mode.
In PC Mode, only "16:9" and "4:3" mode can be adjusted. Zoom : Select by pressing the ◄ or ► buttons.
Use the ▲ or ▼ button to move the picture up and down. After selecting , use the ▲ or ▼ button to magnify or reduce the picture size in the vertical direc­tion.
Wide Zoom : Move the screen up/down using the▲ or ▼ but-
tons after selecting the by pressing the ► or
ENTER/OK button.
TV
More
Size : Auto Wide Screen Mode : 16 : 9 Digital NR : Off Active Colour : Off DNle : Off Movie Plus : Off Reset : OK
Move Enter Return
TV
Auto Wide 16 : 9 Wide Zoom Zoom 4 : 3
Just Scan
Move Enter Return
Picture
Size
 
You can select these options by simply pressing the P.SIZE button on the remote control.
English - 18

Freezing the Current Picture

Press the STILL button to freeze a moving picture into a still one. Press again to cancel.

Selecting the Screen Mode

When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this func­tion is intended for users to select it.
1. Press the MENU button to display the menu. Press the ENTER/OK button, to select “Picture”.
2. Press the ▲ or ▼ button to select "Screen Mode", then press the ENTER/OK button.
3. Select the required option by pressing the
Press the ENTER/OK button. Available options: 16:9, Wide Zoom, Zoom, 4:3 16:9: Sets the picture to 16:9 wide mode. Wide Zoom: Magnify the size of the picture more than 4:3. Zoom: Magnify the size of the picture vertically on screen. 4:3: Sets the picture to 4:3 normal mode.
4. Press the EXIT
button to exit.
Picture Size is available in Auto Wide mode This function is not available in PC or Component, HDMI
mode.
or ▼ button.
More
Size : Auto Wide Screen Mode : 16 : 9 Digital NR : Off Active Colour : Off DNle : Off Movie Plus : Off Reset : OK
Move Enter Return
Move Enter Return
TV
More
Size : Auto Wide
Screen Mode : 16 : 9
Digital NR : Off Active Colour : Off DNle : Off Movie Plus : Off Reset : OK
Move Enter Return
Picture
Picture
Wide Zoom
16:9
Zoom
4:3

Resetting the Picture Settings to the Factory Defaults

You can return to the factory defaults picture settings.
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3 on page 15.
2. Press the ▲ or ▼ button to select "Reset", then press the ENTER/OK button.
Press the ▲ or ▼ button to select "OK" or "Cancel".
3. Press the ENTER/OK button.
4. Press the EXIT
button to exit.
The "Reset" will be set for each picture mode.
English - 19
TV
More
Size : Auto Wide Screen Mode : 16 : 9 Digital NR : Off Active Colour : Off DNle : Off Movie Plus : Off Reset : OK
Move Enter Return
TV
More
Size : Auto Wide Screen Mode : 16 : 9 Digital NR : Off Active Colour : Off DNle : Off Movie Plus : Off
Reset : OK
Move Enter Return
Picture
Picture
OK
Cancel

Digital NR / Active Colour / DNIe / Movie Plus

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen.
1. Press the MENU button to display the menu. Press the ENTER/OK button, to select “Picture”.
2. Select the required option by pressing the ▲ or ▼ button,
then press the ENTER/OK button. Available options: Digital NR, Active Colour, DNIe, Movie Plus.
3. When you are satisfied with your setting, press the ENTER/OK
4. Press the EXIT
button to exit.
Digital NR: Off/Low/Medium/High/Auto If the signal received by the television is weak, you can activate this feature to reduce any static and ghosting that may appear on the screen. This function is not available in PC mode.
Active Colour: Off/On If you turn on this option, the colours of the sky and grass will be stronger and clearer for a more vivid on-screen picture.
This function is not available in PC mode. This function is not available in Movie and Standard mode.
DNIe: Off/Demo/On This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality.
DNIeTM (Digital Natural Image engine) This feature brings you more detailed image with 3D noise reduction, detail enhancement, con-
trast enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, more detailed image to you. DNIeTM technology will fit every signal into your eyes.
This function is not available in PC mode. This function is not available in Movie mode
Movie Plus: Off/On You can view more natural skin and clear text even in fast moving scenes. Use this function when watching movies. The Wide Zoom, Zoom and Just Scan mode is not supported. This function is not available in PC mode.
TV
button.
More
Size : Auto Wide Screen Mode : 16 : 9 Digital NR : Off Active Colour : Off DNle : Off Movie Plus : Off Reset : OK
Move Enter Return
Picture
 
English - 20

Viewing the Picture In Picture (PIP)

You can display a sub picture within the main picture of set programme or video input. In this way, you can watch the picture of set programme or video input from any connected equipment while watching the main picture.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER/OK button.
2. Press the ▲ or ▼ button to select "PIP", then press the ENTER/OK button.
3. Press the ENTER/OK
Press the ▲ or ▼ button to select "On", then press
ENTER/OK button.
button again.
If the PIP is activated, the size of the main picture turns to "16:9".
4. Press the
or ▼ button to select "Source",then press
ENTER/OK button. Select a source of the sub picture by pressing the ▲ or ▼ button and press the ENTER/OK button. The sub picture can serve different source selections based on what the main picture is set to.
5. Press the
or ▼ button to select "Size" of the sub picture
and then press the ENTER/OK button. Select a size of the sub picture by pressing the ▲ or ▼ button and then press the ENTER/OK button. If main picture is in "PC" and “Component” mode, "Size" is not available.
6. Press the
or ▼ button to select "Position", then press the ENTER/OK button.
Select the position of the sub picture by pressing the ▲ or ▼ button and then press the ENTER/OK button.
7. Press the
or ▼ button to select "Programme" and then press the ENTER/OK button.
You can select the channel that you want to view through sub picture by pressing the ▲ or ▼ button. Press the ENTER/OK button. The "Programme" can be active when the sub picture is set to TV.
8. Press the EXIT
button to exit.
You may notice that the picture in the PIP window becomes slightly unnatural when you use the
main screen to view a game or karaoke.
Source: Used to select a source of the sub picture.  Size: Used to select a size of the sub picture.  Position: Used to move the sub picture.  Programme: Used to Change the sub picture.
Mode : Custom
TV
Equalizer More
SRS TS XT : Off Auto Volume : Off
Energy Saving : Off Internal Mute : Off
HDMI Black Level : Low
Reset PIP
Move Enter Return
Mode : Custom
TV
Equalizer PIP : On
SRS TS XT : Off Source : TV Auto Volume : Off
Size :
Internal Mute : Off
Position : Reset
Programme : P 1
Move Enter Return
Press the PIP button on the
remote control repeatedly to acti­vate or deactivate the "PIP".
Setup
Move Enter Return
PIP
Move Enter Return
PIP Settings
Sub
Main
Component
HDMI
PC
TV analog
O O O
Ext.1
O O O
Ext.2
O O O
AV
S-Video O O O
English - 21
X X X
Component
X X X
O: PIP operates, X: PIP doesn’t operate
HDMI
X X X
PC
X X X
TV digital
X X X

HDMI Black Level

You can directly select the black level on the screen to adjust the screen depth.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER/OK button.
2. Press the ▲ or ▼ button to select "HDMI Black Level", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "Normal" or "Low", then press the ENTER/OK
4. Press the EXIT
button.
button to exit.
This function is active only when the external input connects
to HDMI(RGB signals).
Normal: The screen gets brighter.  Low: The screen gets darker.

Changing the Sound Standard

You can select the type of the special sound effect to be used when watching a given broadcast.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER/OK button.
2. Press the ENTER/OK button again, to select "Mode".
3. Select the required sound effect by pressing the button repeatedly and then press the ENTER/OK button.
4. Press the EXIT
button to exit.
Standard: Selects the normal sound mode.  Music: Emphasizes music over voices.  Movie: Provides live and full sound for movies.  Speech: Emphasizes voices over other sounds.  Custom: Selects your custom sound settings.
(Refer to "Adjusting the Sound Settings")
or ▼
Mode : Custom
TV
Equalizer More
SRS TS XT : Off Auto Volume : Off
Energy Saving : Off Internal Mute : Off
HDMI Black Level : Low Reset
PIP
Move Enter Return
Move Enter Return
Mode : Custom
TV
Equalizer More
SRS TS XT : Off Auto Volume : Off
Energy Saving : Off Internal Mute : Off
HDMI Black Level : Low
Reset PIP
Move Enter Return
Move Enter Return
TV
Mode : Custom Equalizer SRS TS XT : Off Auto Volume : Off Internal Mute : Off
Sound Select : Main Reset
Move Enter Return
TV
Mode : Custom
Equalizer SRS TS XT : Off Auto Volume : Off Internal Mute : Off
Sound Select : Main Reset
Move Enter Return
Setup
Setup
Sound
Sound
Normal
Low
Standard
Music
Movie Speech Custom
 
    
English - 22

Adjusting the Sound Settings

The sound settings can be adjusted to suit your personal preferences.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
ENTER/OK button.
2. Press the ▲ or ▼ button to select "Equalizer", then press the ENTER/OK button.
3. Press the ◄ or ► button to select a particular item. Press the ENTER/OK button.
4. Press the ▲ or ▼ button to reach the required setting. Press the ENTER/OK button.
5. Press the EXIT
button to exit.
If you make any changes to these settings, the Sound Mode
is automatically switched to "Custom".

Setting the TruSurround XT (SRS TS XT)

TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling,virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "SRS TS XT", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "On" or "Off". Press the ENTER/OK button.
4. Press the EXIT
button to exit.
TruSurround XT, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc.
TV
Mode : Custom Equalizer SRS TS XT : Off Auto Volume : Off Internal Mute : Off
Sound Select : Main Reset
Move Enter Return
TV
Balance 100Hz 300Hz 1kHz 3kHz 10kHz
Move Adjust Return
TV
Mode : Custom Equalizer SRS TS XT : Off Auto Volume : Off Internal Mute : Off
Sound Select : Main Reset
Move Enter Return
TV
Mode : Custom Equalizer
SRS TS XT : Off
Auto Volume : Off Internal Mute : Off
Sound Select : Main Reset
Move Enter Return
Sound
Equalizer
Sound
Sound
    
    
Off
On
English - 23

Connecting Headphones

You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room.
When you insert the head set jack into the corresponding port, you
can operate only "SRS TS XT" and "Auto Volume" in Sound menu.
Prolonged use of headphones at a high volume may damage your
hearing.
You will not receive sound from the speakers when you connect headphones to the system. The headphone volume and TV volume are adjusted differently.

Selecting the Sound Mode

You can set the sound mode by pressing the “DUAL” button. When you press it, the current sound mode is displayed on the screen.
Audio Type
FM
Stereo
NICAM
Stereo
Mono
Stereo
Dual
Mono
Stereo
Dual
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
DUAL 1/2
MONO
STEREO ↔ MONO DUAL 1 ↔ DUAL 2
MONO
MONO ↔ STEREO
MONO ↔ DUAL 1
DUAL 2
Default
Automatic
change
DUAL 1
Automatic
change
DUAL 1
You can also set these options simply by pressing the DUAL button on remote control.

Adjusting the Volume Automatically

Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. This feature allows you to automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
ENTER/OK button.
2. Press the ▲ or ▼ button to select "Auto Volume", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "On" or "Off". Press the ENTER/OK button.
4. Press the EXIT
button to exit.
English - 24
TV
Mode : Custom Equalizer SRS TS XT : Off Auto Volume : Off Internal Mute : Off
Sound Select : Main Reset
Move Enter Return
TV
Mode : Custom Equalizer SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Sound Select : Main Reset
Move Enter Return
Sound
Sound
Off
On
    

Selecting the Internal Mute

If you want to hear the sound through separate speakers, cancel the internal amplifier.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
ENTER/OK button.
2. Press the ▲ or ▼ button to select "Internal Mute", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "On" or "Off". Press the ENTER/OK button.
4. Press the EXIT
button to exit.
When "Internal Mute" is set to "On", the Sound menus except
for "Sound Select" (in PIP mode) cannot be adjusted.
TV
TV

Listening to the Sound of the Sub Picture

During the PIP features activation, you can listen to the sound of the sub picture.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
ENTER/OK button.
2. Press the ▲ or ▼ button to select "Sound Select", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "Sub". Press the ENTER/OK button.
4. Press the EXIT
button to exit.
Main : Used to listen to the sound of the main picture.  Sub : Used to listen to the sound of the sub picture.
You can select this option when the “PIP” is set to “On”.
TV
TV
Mode : Custom Equalizer SRS TS XT : Off Auto Volume : Off Internal Mute : Off
Sound Select : Main Reset
Move Enter Return
Mode : Custom Equalizer SRS TS XT : Off Auto Volume : Off
Internal Mute : Off
Sound Select : Reset
Move Enter Return
Mode : Custom Equalizer SRS TS XT : Off Auto Volume : Off Internal Mute : Off Sound Select : Main
Reset
Move Enter Return
Mode : Custom Equalizer SRS TS XT : Off Auto Volume : Off Internal Mute : Off
Sound Select : Main
Reset
Move Enter Return
Sound
Sound
Off
Sound
Sound
On
Main
Sub
    
     
English - 25

Resetting the Sound Settings to the Factory Defaults

If Game Mode is On, the Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Reset", then press the ENTER/OK button.
3. Press the EXIT
You can select this option when the "Game Mode" is set to "On".
button to exit.

Setting and Displaying the Current Time

You can set the TV’s clock so that the current time is dis­played when you press the INFO button. You must also set the time if you wish to use the automatic On/Off timers.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER/OK button.
2. Press the ▲ or ▼ button to select "Time", then press the ENTER/OK button.
3. Press the ENTER/OK
4.
To...
Move to Month, Day, Year, Hour or Minute Set the Month, Day, Year, Hour or Minute Press the ENTER/OK button.
button to select "Clock Set".
Press the...
or  button.
5
or 6 button.
TV
Mode : Custom Equalizer SRS TS XT : Off Auto Volume : Off Internal Mute : Off
Sound Select : Main
Reset
Move Enter Return
Mode : Custom
TV
Equalizer Plug & Play
SRS TS XT : Off Language : English Auto Volume : Off Time
Internal Mute : Off
Game Mode : Off
Reset
Blue Screen : Off Melody : Off
PC
TV
Home Theatre PC
More
: Off
Move Enter Return
Move Enter Return
Clock Set
Month
p
01
q
Hour00Minute
00
Sound
Setup
Day
01
Year
2007

    
5. Press the EXIT
button to exit.
Move Adjust Return
If you disconnect the power cord, you have to set the clock
again.
You can also set Year, Month, Day, Hour and Minute by pressing the number buttons on the
remote control.
English - 26

Setting the Sleep Timer

You can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER/OK button.
2. Press the ▲ or ▼ button to select "Time", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "Sleep Timer", then press
the ENTER/OK
button.
4. Press the ▲ or ▼ button repeatedly until the desired time
appears (Off, 30, 60, 90, 120, 150, 180). Press the ENTER/OK button.
5. Press the EXIT
button to exit.
The TV automatically switches to standby mode when the
timer reaches 0.
Mode : Custom
TV
Equalizer Plug & Play
SRS TS XT : Off Language : English Auto Volume : Off Time
Internal Mute : Off
Game Mode : Off
Reset
Blue Screen : Off Melody : Off
PC
Home Theatre PC
More
TV
Clock Set :
Sleep Timer :
Timer 1 : Timer 2 : Timer 3 :
: Off
Move Enter Return
Move Enter Return
Move Enter Return
Setup
Time
Off
30 60
90 120 150 180

Switching the Television On and Off Automatically

1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER/OK button.
2. Press the ▲ or ▼ button to select "Time", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "Timer 1", "Timer 2", "Timer 3", then press the ENTER/OK button.
4. Press the ▲ or ▼ buttons to adjust “Hour”, then press the ►
button to move to the next step. Set other items using the same method as above.
Yes/ No Press the ▲or▼ button
Repeat Select a Once, Everyday,
Press the ▲or▼ button
Mon-Fri, Mon-Sat, Sat­Sun
Volume Adjust a 0~100 Press the ▲or▼ button
When finished, press the RETURN button to return.
• The current time will appear every time you press the INFO button.
• You can set the hour, minute, directly by pressing the number buttons on the remote control.
5. Press the EXIT
button to exit.
Mode : Custom
TV
Equalizer Plug & Play
SRS TS XT : Off Language : English Auto Volume : Off Time
Internal Mute : Off
Game Mode : Off
Reset
Blue Screen : Off Melody : Off
PC
TV
Home Theatre PC
More
On Time
Off Time
Repeat
: Off
Move Enter Return
Move Enter Return
Timer 1
5
:
00
00
6
:
00 00 No
Once
► Move Adjust Return
Setup
Volume
No
10
English - 27

Choosing Your Language

When you start using your set for the first time, you must select the language which will be used for displaying menus and indications.
1. Press the MENU button to display the on-screen menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER/OK button.
2. Press the ▲ or ▼ button to select "Language", then press the ENTER/OK button.
3. Select a particular language by pressing the ▲ or ▼ button
repeatedly. Press the ENTER/OK button. You can choose one of 21 languages.
4. Press the EXIT
button to exit.
Mode : Custom
TV
Equalizer Plug & Play
SRS TS XT : Off Language : English Auto Volume : Off Time
Internal Mute : Off
Game Mode : Off
Reset
Blue Screen : Off Melody : Off
PC
Home Theatre PC
More
Mode : Custom
TV
Equalizer Plug & Play
SRS TS XT : Off
Language : English
Auto Volume : Off Time
Internal Mute : Off
Game Mode : Off
Reset
Blue Screen : Off Melody : Off
PC
Home Theatre PC
More
: Off
Move Enter Return
Move Enter Return
: Off
Move Enter Return
Move Enter Return
Setup
Setup
English
Deutsch Français
Italiano Español
Nederlands
q

Using Game Mode

When connecting to a game console such as PlayStationTM or XboxTM, you can enjoy a more realistic gaming experience by selecting game menu.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER/OK button.
2. Press the ▲ or ▼ button to select "Game Mode", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "On" or "Off". Press the ENTER/OK button.
4. Press the EXIT
button to exit.
To disconnect the game console and connect another
external device, cancel game mode in the setup menu.
If you display the TV menu in Game mode, the screen
shakes slightly.
Game Mode is not available in TV mode. If Game Mode is On:
• Picture Mode changes to Standard and Sound Mode changes to Custom automatically. The user cannot change these to other modes.
• Sound Mode in the Sound menu is deactivated. Adjust the sound using the equalizer.
• The Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults.
Mode : Custom
TV
Equalizer
Plug & Play
SRS TS XT : Off Language : English Auto Volume : Off Time
Internal Mute : Off
Game Mode : Off Reset
Blue Screen : Off Melody : Off
PC
Home Theatre PC
More
Mode : Custom
TV
Equalizer
Plug & Play
SRS TS XT : Off Language : English Auto Volume : Off Time
Internal Mute : Off
Game Mode : Off
Reset
Blue Screen : Off Melody : Off
PC
Home Theatre PC
More
: Off
Move Enter Return
Move Enter Return
: Off
Move Enter Return
Move Enter Return
Setup
Setup
Off
On
English - 28
Loading...
+ 152 hidden pages