Samsung LE32M71B User Manual [sv]
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Kontakt SAMSUNG
Om du har några frågor eller synpunkter om Samsungs produkter, är du välkommen att kontakta Samsung Support.
Kontakt SAMSUNG
Hvis du har spørgsmål eller kommentarer vedrørende Samsung produkter, venligst kontakte Samsung Support.
Kontakt SAMSUNG
Om du har spørsmål eller synspunkter om Samsungs produkter, er du velkommen å kontakte Samsung Support.
Ota yhteyttä Samsungiin
Jos sinulla on kysymyksiä tai kommentteja koskien Samsung tuotteita voitte ottaa yhtyettä Samsung tukeen.
Dünyanın her yerinden SAMSUNG’a ulaşın.
Samsung ürünleri ile ilgili sorularınız ya da yorumlarınız varsa lütfen SAMSUNG müşteri hizmetleri merkezi ile temasa geçin.
Country |
Customer Care Center |
Web Site |
BELGIUM |
02 201 2418 |
www.samsung.com/be |
CZECH REPUBLIC |
844 000 844 |
www.samsung.com/cz |
DENMARK |
38 322 887 |
www.samsung.com/dk |
FINLAND |
09 693 79 554 |
www.samsung.com/fi |
FRANCE |
08 25 08 65 65 (€ 0,15/Min) |
www.samsung.com/fr |
GERMANY |
01805 - 121213 (€ 0,12/Min) |
www.samsung.de |
HUNGARY |
06 40 985 985 |
www.samsung.com/hu |
ITALIA |
199 153 153 |
www.samsung.com/it |
LUXEMBURG |
02 261 03 710 |
www.samsung.lu |
NETHERLANDS |
0900 20 200 88 (€ 0.10/Min) |
www.samsung.com/nl |
NORWAY |
231 627 22 |
www.samsung.com/no |
POLAND |
0 801 801 881 |
www.samsung.com/pl |
PORTUGAL |
80 8 200 128 |
www.samsung.com/pt |
RUSSIA |
8-800-200-0400 |
www.samsung.ru |
SLOVAKIA |
0850 123 989 |
www.samsung.com/sk |
SPAIN |
902 10 11 30 |
www.samsung.com/es |
SWEDEN |
08 585 367 87 |
www.samsung.com/se |
U.K |
0870 242 0303 |
www.samsung.com/uk |
UKRAINE |
8-800-502-0000 |
www.samsung.com/ur |
BN68-01090H-00
LCD TV
LE32M7
LE40M7
Owner’s Instructions
Before operating the unit, please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
This device is a Class B digital apparatus.
Register your product at www.samsung.com/global/register
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
•Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
•Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of
the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.
•Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
Att tänka på vid visning av stillbild
Stillbilden kan orsaka permanenta skador på bildskärmen.
•Visa inte en stillbild på skärmen i mer än två timmar, eftersom det kan leda till att bilden ligger kvar på skärmen. Att bilden på skärmen behålls kallas även “bildskärmsbränning”.
Du kan undvika att bilden behålls genom att minska på ljusstyrkan och kontrasten på bildskärmen när du visar stillbilder.
•Användning av LCD TV:n i 4:3-format under en längre tid kan lämna spår av kanterna till vänster, höger och mitt på skärmen
vilket orsakas av skillnaden i ljusstrålning i skärmen. Uppspelning av en DVD eller tv-spel kan orsaka samma effekter på skärmen. Skador som orsakas av det som beskrivs ovan täcks inte av garantin.
•Visning av stillbilder från tv-spel och datorer längre stunder kan skapa delvisa efterbilder. För att förhindra detta ska du minska på ljusstyrka och kontrast vid visning av stillbilder.
Forholdsregler for visning af et stillbillede
Et stillbillede kan medføre permanent beskadigelse af tv-skærmen.
•Vis ikke et stillbillede på LCD-panelet i mere end to timer, da det kan medføre billedindbrænding. Denne billedindbrænding kaldes også “screen burn”.
For at undgå dette skal lysstyrken og kontrasten ved visning af et stillbillede reduceres.
•Hvis du ser LCD-tv i 4:3-format i lang tid, kan der opstå kanter, der vises til venstre, højre og på midten af skærmen.
Dette skyldes den forskellige lyspåvirkning af skærmen. Afspilning af dvd eller brug af en spillekonsol kan medføre en tilsvarende effekt på skærmen. Beskadigelse forårsaget af ovenstående dækkes ikke af forsikringen.
•Visning af stillbilleder fra videospil og pc i længere end en bestemt tid kan medføre delvise after-billeder. For at forhindre dette kan du reducere ‘lysstyrke’ og ‘kontrast’, når du afspiller stillbilleder i længere tid.
Forholdsregler ved visning av et stillbilde
Et stillbilde kan forårsake permanent skade på TV-skjermen.
•La ikke et stillbilde vises på LCD-panelet i mer enn 2 timer, da det kan forårsake et ekkobilde. Denne effekten er også kjent som “screen burn”, det vil si at skjermbildet brenner seg fast.
Du kan unngå dette ved å redusere lysstyrken og kontrastnivået på skjermen når du viser stillbilder.
•Dersom LCD-skjermen brukes til visning i 4:3-format over lengre tid, kan dette føre til at det oppstår linjer til høyre, venstre og i midten
av skjermen. Dette på grunn av forskjeller mellom lysstrålingen på de forskjellige stedene på skjermen. Dersom skjermen brukes til videospill og visning av DVDer kan dette gi liknende resultater. Skader forårsaket av effekten ovenfor, dekkes ikke av garantien.
•Dersom spill og annet settes på pause i en lengre periode enn det som er anbefalt, kan dette gi en etterbildeeffekt. Denne virkningen kan forebygges ved at ‘lysstyrke’ og ‘kontrast’ reduseres ved visning av stillbilder.
Varoituksia pysäytyskuvan käytöstä
Pysäytyskuva voi vaurioittaa television kuvaruutua pysyvästi.
•Älä pidä nestekidetelevision kuvaruudussa pysäytyskuvaa 2 tuntia kauempaa, koska tällöin kuva voi jäädä ruutuun pysyväksi jäännöskuvaksi. Jäännöskuvaa kuvataan myös “kuvan palamiseksi kuvaruutuun”.
Kun kuvaruudussa on pysäytyskuva, vähennä kirkkautta ja kontrastia, jottei jäännöskuvaa pääsisi muodostumaan.
•LCD-television pitkäaikainen katselu 4:3 kuvasuhteella saattaa jättää kuvaruudulle reunuksia, jotka johtuvat valon säteilyn
eroavuudesta kuvaruudulla. DVD:n tai pelin toisto saattaa aiheuttaa samanlaisen vaikutuksen näytöllä. Takuu ei kata tästä syystä syntyneitä vaurioita.
•Videopelien ja pc:n still-kuvien määrätyn ajan ylittävä näyttö saattaa aiheuttaa osittaisia jälkikuvia.
Voit estää tämän ilmiön vähentämällä kuvaruudun kirkkautta ja kontrastia, jos katselet pitkään pysäytyskuvia.
Sabit Görüntünün Gösterilmesiyle ilgili Önlemler
Sabit görüntü TV ekranında kalıcı hasara neden olabilir.
•LCD ekran panelinde sabit bir görüntüyü 2 saatten fazla tutmay›n.
Bu, ekran görüntüsünde takılmaya neden olabilir. Bu görüntü takılmasına, “ekran yanması” da denir.
Bu tür bir kalıcı görüntüyü önlemek için hareketsiz bir görüntü ekrandayken parlaklık ve kontrast değerlerini düflük bir seviyeye ayarlayınız.
•LCD televizyonu uzun süre 4:3 formatında izlemek, farklı ıflık emisyonundan dolayı ekranın solunda, sağında ve ortasında çizgi
fleklinde izler bırakabilir. DVD ya da oyun konsolunu oynatmak da benzer etkiye yol açabilir. Yukarıdaki etkilerin neden olduğu hasarlar Garanti kapsamında değildir.
•Video oyunlarından ve bilgisayardan uzun süre durağan resimlerin görüntülenmesi kısmi görüntü izi oluflturabilir. Bu etkiyi önlemek için, durağan görüntüleri ekranda tutarken ‘parlaklık’ ve ‘kontrast’ derecelerini azaltın.
©2006 Samsung Electronics Co., Ltd. All rights reserved.
Contents |
|
CONNECTING AND PREPARING YOUR TV |
|
List of Parts....................................................................................... |
2 |
Installing the Wall Mount Kit................................................ |
2 |
Viewing the Control Panel ......................................................... |
3 |
Viewing the Connection Panel................................................. |
4 |
Viewing the Remote Control..................................................... |
6 |
Installing Batteries in the Remote Control........................... |
6 |
Switching On and Off .................................................................. |
7 |
Placing Your Television in Standby Mode............................. |
7 |
Plug & Play ....................................................................................... |
7 |
SETTING THE CHANNELS |
|
Storing Channels Automatically .............................................. |
8 |
Storing Channels Manually........................................................ |
8 |
Setting the Channel Manager .................................................. |
9 |
Activating the Child Lock ...................................................... |
10 |
Sorting the Stored Channels..................................................... |
10 |
Assigning Channels Names ....................................................... |
11 |
Fine Tuning Channel Reception............................................... |
11 |
SETTING THE PICTURE |
|
Using the LNA (Low Noise Amplifier) Feature .................... |
12 |
Changing the Picture Standard................................................ |
12 |
Adjusting the Custom Picture................................................... |
12 |
Changing the Colour Tone......................................................... |
13 |
Adjusting the Color Tone with the Preferred |
|
Color Component.......................................................................... |
13 |
Resetting the Picture Settings to the |
|
Factory Defaults............................................................................. |
14 |
Changing the Picture Size.......................................................... |
14 |
Changing the Auto Wide (4:3) .................................................. |
14 |
Freezing the Current Picture ..................................................... |
15 |
Digital Noise Reduction .............................................................. |
15 |
DNIe Demo (Digital Natural Image engine) ........................ |
15 |
Changing the Colour Space....................................................... |
16 |
Changing the LCD 100Hz ........................................................... |
16 |
Viewing the Picture In Picture (PIP) ........................................ |
17 |
SETTING THE SOUND |
|
Changing the Sound Standard ........................................... |
18 |
Adjusting the Sound Settings ............................................. |
18 |
Setting the TruSurround XT (SRS TSXT) ........................... |
18 |
Adjusting the Volume Automatically................................ |
19 |
Selecting the Internal Mute.................................................. |
19 |
Listening to the Sound of the Sub Picture...................... |
19 |
Resetting the Sound Settings to the |
|
Factory Defaults........................................................................ |
20 |
Connecting Headphones ...................................................... |
20 |
Selecting the Sound Mode................................................... |
20 |
SETTING THE TIME |
|
Setting and Displaying the Current Time........................ |
20 |
Setting the Sleep Timer.......................................................... |
21 |
Switching the Television |
|
On and Off Automatically ..................................................... |
21 |
SETTING THE OTHERS |
|
Choosing Your Language ...................................................... |
22 |
Using Game Mode ................................................................... |
22 |
Setting the Blue Screen Mode / |
|
Selecting the Melody ............................................................. |
23 |
Using the Energy Saving Feature ....................................... |
23 |
Setting the Blue Eye ................................................................ |
23 |
Selecting the Source ............................................................... |
24 |
Editing the Input Source Names ........................................ |
24 |
WISELINK |
|
Using the WISELINK Function .............................................. |
25 |
Using the WISELINK Menu .................................................... |
26 |
Using the PHOTO (JPEG) List................................................ |
26 |
Viewing Photo File Information.......................................... |
28 |
Selecting a Photo and Slide Show..................................... |
28 |
Rotating ....................................................................................... |
29 |
Zooming-in................................................................................. |
30 |
Copying Image Files................................................................ |
31 |
Deleting Image Files................................................................ |
31 |
Printing a Photo........................................................................ |
32 |
Using the MP3 List ................................................................... |
32 |
Copying Music Files................................................................. |
33 |
Deleting Music Files ................................................................ |
33 |
Using the Setup Menu ........................................................... |
34 |
USING THE TELETEXT FEATURE |
|
Teletext Decoder ...................................................................... |
35 |
Displaying the Teletext Information.................................. |
35 |
Selecting a Specific Teletext Page...................................... |
36 |
Using Fastext to Select a Teletext Page............................ |
36 |
Setting Up Your Remote Control........................................ |
37 |
Remote Control Codes ........................................................... |
39 |
SETTING THE PC |
|
Setting up Your PC Software |
|
(Based on Windows XP) ......................................................... |
42 |
Display Modes ........................................................................... |
42 |
Setting the PC............................................................................ |
43 |
RECOMMENDATIONS FOR USE |
|
Using the Anti-Theft Kensington Lock ............................. |
44 |
Troubleshooting: |
|
Before Contacting Service Personnel ............................... |
44 |
Technical and Environmental Specifications ................ |
45 |
Symbol |
Press |
Important |
Note |
One-Touch |
|
|
|
|
Button |
English
English-1
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remote Control & |
Power Cord |
Cover-Bottom |
Stand Screw X4 |
Stand |
Cleaning Cloth |
|||
Batteries (AAA x 2) |
||||||||
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
Owner’s Instructions |
|
Warranty card |
Safety Guide |
|
Registration Cards |
|||
|
|
|
|
|
|
|
|
|
Warranty card / Safety Guide / Registration Cards (Not available in all locations)
The stand and stand screw may not be included depending on the model.
Installing the Stand
< 3 >
<2 >
1.Place the TV faced down on a soft cloth or cushion on a table.
2.Put the stand into the hole at the bottom of the TV.
3.Insert screw into the hole indicated and tighten.
The stand is installed for models with the screen size of 40 inch and above.
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others
if you elect to install the TV on your own.
Remove the stand and cover the bottom hole with a cap and fasten with two screws.
English-2
Viewing the Control Panel
The product colour and shape may vary depending on the model.
SOURCE |
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
||||||||||
Toggles between all the available input |
|
Press to change channels. |
|
||||||||||||
sources (TV, Ext.1, Ext.2, AV, S-Video, Component, PC, |
In the on-screen menu, use the |
|
|
buttons |
|||||||||||
|
|||||||||||||||
|
|||||||||||||||
HDMI1, HDMI2). In the on-screen menu, |
|
as you use the and buttons on the remote |
|||||||||||||
use this button as you use the ENTER button |
control. (Without the Remote Control, you can turn |
||||||||||||||
on the remote control. |
|
on the TV by using the Channel buttons.) |
|
||||||||||||
MENU |
|
Speakers |
|
||||||||||||
Press to see an on-screen menu of your TV’s features. |
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
(Power) |
|
|||
|
|
|
|
|
|
|
|
|
|
|
Press to turn the TV on and off. |
|
|||
Press to decrease or increase the volume. |
|
|
|||||||||||||
|
Power Indicator |
|
|||||||||||||
In the on-screen menu, use the |
|
|
|
|
buttons |
|
|||||||||
|
|
|
|
|
|||||||||||
|
|
|
|
|
|||||||||||
as you use the and buttons on the remote control. |
Blinks and turns off when the power is on and lights |
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
up in stand-by mode. |
|
|||
Remote Control Sensor
Aim the remote control towards this spot on the TV.
English-3
Viewing the Connection Panel
[Rear Panel Jacks]
Power Input
[Side Panel Jacks] |
Whenever you connect an external device to your TV, make sure that power on the unit is turned off. 
When connecting an external device, match the colour of the connection terminal to the cable.
English-4
Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following sources: - An outdoor aerial / A cable television network / A satellite network
Connecting HDMI/DVI
-Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players, AV receivers and digital TVs).
-No additional Audio connection is needed for an HDMI to HDMI connection.
What is HDMI?
-“High Definition Multimedia Interface” allows the transmission of high definition digital video data and multiple channels of digital audio ( 5.1 channels).
-The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP
(High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.
You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the “R - AUDIO - L” terminal on DVI for sound output.
-When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure that it has been set to a compatible video output mode as shown in the table below.
Failure to observe this may result in picture distortion, image breakup or no picture.
Supported modes for DVI or HDMI
|
480i |
480p |
576i |
576p |
720p |
1080i |
50 Hz |
X |
O |
X |
O |
O |
O |
60 Hz |
X |
O |
X |
X |
O |
O |
Component |
O |
O |
O |
O |
O |
O |
-Do not attempt to connect the HDMI/DVI connector to a PC or Laptop Graphics Card. (This will result in a blank screen being displayed)
Connecting Set-Top Box, VCR or DVD
-Connect the VCR or DVD SCART cable to the SCART connector of the VCR or DVD.
-If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box to the VCR (or DVD) and connect the VCR (or DVD) to your set.
Connecting External A/V Devices
-Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
-Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio out connectors on the A/V device.
-Headphone may be connected to the headphone output (
) on the rear of your set. While the headphone is connected, the sound from the built-in speakers will be disabled.
SERVICE
- Service connection for qualified service engineer.
Connecting AUDIO
-Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio in connectors on the Amplifier or DVD Home Theater.
Connecting Computer
-Connect the D- Sub cable (optional) to “PC (PC IN)” on the rear of your set and the other end to the Video Card of your computer.
-Connect the stereo audio cable (optional) to “AUDIO (PC IN)” on the rear of your set and the other end to “Audio Out” of the sound card on your computer.
Connecting Component Devices (DTV/DVD)
-Connect component video cables (optional) to component connector (“PR”, “PB”, “Y”) on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD.
-If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector (“PR”, “PB”, “Y”) on your set.
-The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
-Connect RCA audio cables (optional) to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD.
-This LCD TV displays its optimum picture resolution in 720p mode.
-This LCD TV displays its maximum picture resolution in 1080i mode.
Kensington Lock
-The Kensington lock (optional) is a device used to physically fix the system when used in a public place.
-If you want to use a locking device, contact the dealer where you purchased the TV.
-The place of the Kensington Lock may be different depending on its model.
English-5
Viewing the Remote Control
Selects a target device to be controlled by the Samsung remote control (TV, DVD, STB, CABLE, VCR) (Refer to page 37~41)
Television Standby button
Number buttons for direct channel access
One/Two-digit channel selection
It displays "Channel Manager" on the screen.
Selects the TV mode directly
VCR/DVD Functions Rewind, Stop, Play/Pause, Fast/Forward
Volume increase
Volume decrease
Temporary sound switch-off
Menu display and change confirmation
Picture-In-Picture On / Off
Picture effect selection
Sound effect selection
Sound mode selection
SRS TSXT selection
SET: Adjusts 5 separate devices - TV, DVD, STB, CABLE, or VCR.
RESET: When your remote does not work, change the batteries and press the “RESET” button for 2-3 seconds before use.
Available source selection
When pressing this button, a number of buttons on the remote control (e.g.
Selects a target device, volume, channel and MUTE buttons) light up for a few seconds and then turn off to save power. This function is to conveniently use the remote control at night or when dark.
Previous channel
Automatic Power-off
This function enables you to load saved photo (JPEG) and audio files (MP3) and to view or play them on the TV.
P
: Next channel
P
: Previous channel 
Exit the OSD
Control the cursor in the menu
Use to see information on the current broadcast
Picture size selection
Selects the PC mode directly
Picture freeze
Input source selection
Teletext Functions
Exit from the Teletext display
Teletext index
Teletext hold
Teletext size selection
Teletext store
Teletext mode selection (LIST/FLOF)
Teletext sub page
P
: Teletext next page
P
: Teletext previous page 
Teletext cancel
Teletext reveal
Alternately select Teletext, Double, or Mix. 
Fastext topic selection
The performance of the remote control may be affected by bright light.
This is a special remote control for the visually impaired,
and has Braille points on the Power, Channel and Volume buttons.
Installing Batteries in the Remote Control
1.Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AAA size batteries.
Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.
3.Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a
long time. The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work, check the following:
1.Is the TV power on?
2.Are the plus and minus ends of the batteries reversed?
3.Are the batteries drained?
4.Is there a power outage, or is the power cord unplugged?
5.Is there a special fluorescent light or neon sign nearby?
English-6
Switching On and Off
The mains lead is attached to the rear of your set.
1.Plug the mains lead into an appropriate socket.
The standby indicator lights up on the front of the set.
2.Press the 
button on the front of the set.
You also can press the POWER
button or the TV (
) button on the remote control to turn the TV on.
The programme that you were watching last is reselected automatically.
3.Press the numeric button (0~9) or channel up/down (
/
) button on the remote control or
button on the right side of the set.
When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.
4.To switch your set off, press the POWER 
button again.
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1.Press the POWER
button on the remote control.
The screen is turned off and a blue standby indicator appears on the front of your set.
2.To switch your set back on, simply press the POWER 
, numeric buttons (0~9) or channel
up/down (
/
) button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial.
Plug & Play
When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available.
1. |
Press the POWER |
button on the remote control. |
|
||||
|
|
|
2. |
The message “Start Plug & Play” is displayed with “OK” selected. |
|||
|
|
|
|||||
|
|
|
Press the or buttons to select “Shop” or “Home”, then the ENTER button. |
||||
|
|
|
|||||
|
|
|
|
We recommend setting the TV to Home mode for the best picture in your home envronment. |
|||
|
|
|
|
Shop mode is only intended for use in retail environments. |
|
||
|
|
|
|
If the unit is accidentally set to Shop Mode, press and hold the MENU button on the side |
|||
|
|
|
|
panel of the TV for five seconds to return to Dynamic (Home) mode. |
|||
3. |
Select the appropriate language by pressing the |
or |
button. |
||||
|
|
|
|
Press the ENTER button to confirm your choice. |
|
|
|
4. |
The message “Check antenna input.” is displayed with “OK” selected. |
||||||
|
|
|
|
Press the ENTER button. |
|
|
|
|
|
|
|
Please check that the antenna cable is connected correctly. |
|
||
5. |
Select the appropriate country by pressing the |
or |
button. |
||||
|
|
|
|
Press the ENTER button to confirm your choice. |
|
|
|
6.The “Auto Store” menu is displayed with the “Start” selected. Press the ENTER button.
The channel search will start and end automatically.
After all the available channels are stored, the “Clock Set” menu appears.
Press the ENTER button at any time to interrupt the memorization process.
7. Press the ENTER button. |
or button. |
Select the “Hour” or “Minute” by pressing the |
|
Set the “Hour” or “Minute” by pressing the or |
button. |
You can also set the hour and minute by pressing the number buttons on the remote control.
8.Press the ENTER button to confirm your setting.
Language: Select your language.
Country: Select your country.
Auto Store: Automatically scans for and stores channels available in the local area.
Clock Set: Sets the current time for the TV clock.
English-7
If you want to reset this feature...
1. |
Press the MENU button to display the menu. |
|
Press the or button to select “Setup”, then press the ENTER button. |
2. |
Press the ENTER button again, to select “Plug & Play”. |
3. |
The message to “Start Plug & Play” is displayed. |
- Storing Channels Automatically |
- Storing Channels Manually |
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme
numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.
1.Press the MENU button to display the menu.
Press the |
or |
button to select “Channel”, then press the ENTER button. |
2.Press the ENTER button to select “Country”.
3. |
Select the appropriate country by pressing the |
or |
button. |
||
|
Press the ENTER button to confirm your choice. |
|
|
||
4. |
Press the |
or |
button to select “Auto Store”, then press the ENTER button. |
||
5.Press the ENTER button.
The TV will begin memorizing all of the available channels.
Press the ENTER button at any time to interrupt the memorization process and return to the “Channel” menu.
6.After all the available channels are stored, the “Sort” menu appears.
Storing Channels Manually
You can store up to 100 channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.
1.Press the MENU button to display the menu.
Press the |
or |
button to select “Channel”, then press the ENTER button. |
2. Press the |
or |
button to select “Manual Store”, then press the ENTER button. |
3.Press the ENTER button to select “Programme”.
4. To assign a programme number to a channel, find the correct number by pressing the or button and then press the ENTER button.
You can also set a programme number by pressing number buttons on the remote control.
English-8
5. |
Press the |
or |
button to select “Colour System”, then press the ENTER button. |
||
6. |
Select the colour standard required by pressing the |
or |
button then, press the ENTER button. |
||
7. |
Press the |
or |
button to select “Sound System”, then press the ENTER button. |
||
8. |
Select the sound standard required by pressing the |
or |
button, then press the ENTER button. |
||
If there is an abnormal sound or no sound, re-select the sound system required.
9. If you know the number of the channel to be stored, press the |
or button to select “Channel”. Press the ENTER button. |
|
Select C (Air channel) or S (Cable channel) by pressing the or |
button. Press the |
button to select channel. |
Select the required number by pressing the or button and then press the ENTER button.
Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)
You can also set a channel number by pressing number buttons on the remote control.
10. |
If you do not know the channel numbers, press the |
or button to select “Search”. |
|
Press the ENTER button. Search by pressing the or |
button and then press the ENTER button. |
11. |
Press the or button to select “Store”. Press the ENTER button to select “OK”. |
|
12. |
Repeat steps 3 to 11 for each channel to be stored. |
|
|
|
|
Programme: Selects a program number for the channel. |
Channel: Selects a channel. |
|
Colour System: Sets the colour supporting system. |
Search: Scans for the frequency value for the channel. |
|
Sound System: Sets the sound supporting system. |
Store: Saves your settings. |
|
|
|
|
Setting the Channel Manager
Set the channels according to your preference.
You can easily delete, add, or lock the channel you want.
1. |
Press the MENU button to display the menu. Press the or button |
|||
|
|
|
2. |
to select “Channel”, then press the ENTER button. |
|
|
|
Press the or button to select “Channel Manager”, |
|
|
|
|
||
|
|
|
|
then press the ENTER button. |
3. Press the ENTER button again, to select “Channel Manager”.
|
|
4. |
Press the |
button to select “ |
|
|
” line. |
|
|
|
|||||||
|
|
5. |
Press the |
or |
button to select the undesired channel, |
|||
|
|
|||||||
|
|
|
then press the ENTER button to cancel. |
|||||
|
|
|
||||||
|
|
|
|
|
|
|
|
|
6. Repeat steps 5 for each channel to be selected or canceled
7. Press the EXIT button to exit.
“ 
” is active when “Child Lock” is selected to “On”.
You can select these options by simply pressing the CH MGR button on the remote control.
English-9
Activating the Child Lock
This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out video and audio. Child Lock cannot be released using the buttons on the side.
Only the remote control can release the Child Lock setting, so keep the remote control away from children.
1. |
Press the MENU button to display the menu. Press the |
or |
button |
|||||||
|
|
|
|
to select “Channel”, then press the ENTER button. |
|
|
||||
2. |
Press the |
or |
button to select “Channel Manager”, |
|
|
|||||
|
|
|
|
then press the ENTER button. |
|
|
||||
|
|
|
3. |
Press the |
or |
button to select “Child Lock”, then press the ENTER button. |
||||
|
|
|
||||||||
|
|
|
4. |
Press the |
or |
button to select “On”. Press the ENTER button. |
|
|||
|
|
|
|
|||||||
|
|
|
5. |
Press the |
or |
button to select “Channel Manager”, then press the ENTER |
||||
|
|
|
||||||||
|
|
|
6. |
button. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
Press the |
button to select “ |
|
” line. |
|
|
||
|
|
|
|
|
|
|||||
|
|
|
||||||||
|
|
|
7. |
Press the |
or |
button to select the channels you want to lock, |
||||
|
|
|
||||||||
then press the ENTER button.
8. Repeat steps 7 for each channel to be locked or unlocked.
9.Press the EXIT button to exit.
Select “On” or “Off” in “Child Lock” to easily turn the channels which selected on “
” to be active or inactive.
Sorting the Stored Channels
You can exchange the numbers of two channels, in order to:
Modify the numeric order in which the channels have been automatically stored.
Give easily remembered numbers to the channels that you watch most often.
1. |
Press the MENU button to display the menu. Press the or button |
|
|
to select “Channel”, then press the ENTER button. |
|
2. |
Press the |
or button to select “Sort”, then press the ENTER button. |
3. |
Select channel number that you wish to change by pressing the |
|
|
or |
button repeatedly. Press the ENTER button. |
The selected channel number and name are moved to right side.
4. Press the or button to move to the position in which you would like to change and then press the ENTER button.
The selected channel is exchanged with the one previously stored to the chosen
number.
5.Repeat steps 3 to 4 for another channel to be sorted.
6.Press the EXIT button to exit.
English-10
Assigning Channels Names
Channel names will be assigned automatically when channel information is broadcast.
These names can be changed, allowing you to assign new names.
1. |
Press the MENU button to display the menu. Press the or button |
|
|
to select “Channel”, then press the ENTER button. |
|
2. |
Press the or |
button to select “Name”, then press the ENTER button. |
3. |
If necessary, select the channel to be assigned to a new name by |
|
|
pressing the |
or button. Press the ENTER button. |
The selection bar is displayed around the name box.
4. |
To... |
Then... |
|
|
Select a letter, number or symbol |
Press the |
or button |
|
Move on the next letter |
Press the |
button |
|
Move back the previous letter |
Press the |
button |
|
Confirm the name |
Press the ENTER button |
|
|
The characters available are : |
|
|
Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters ( -, space)
5.Repeat steps 3 to 4 for each channel to be assigned to a new name.
6.Press the EXIT button to exit.
Fine Tuning Channel Reception
Use fine tuning to manually adjust a particular channel for optimal reception.
1.Use the number buttons to directly select the channel that
you want to fine tune.
2.Press the MENU button to display the menu.
|
|
Press the |
or |
button to select “Channel”, then press the ENTER button. |
3. |
Press the |
or |
button to select “Fine Tune”, then press the ENTER button. |
|
4. |
Press the |
or |
button to adjust the fine tuning. |
|
Press the ENTER button.
5.Press the EXIT button to exit.
Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner. And the channel number turns red.
To reset the fine-tuning, select “Reset” by pressing the or button and then press the
ENTER button.
English-11
Using the LNA (Low Noise Amplifier) Feature
This function is very useful in the situation that the TV is used in a weak signal area. LNA amplifies the TV signal in the weak signal area, a low-noise preamplifier boosts the incoming signal.
1. |
Press the MENU |
|
|
Press the |
or |
2. |
Press the |
or |
button to display the menu.
button to select “Channel”, then press the ENTER button.
button to select “LNA”, then press the ENTER button.
3. Select “Off“ or “On“ by pressing the or button. Press the ENTER button.
4.Press the EXIT button to exit.
If the picture is noisy with the LNA set to On, select Off.
LNA setting must be set for each individual channel.
Changing the Picture Standard
You can select the type of picture which best corresponds to your viewing requirements.
|
|
|
|
|
|
|
|
1. |
Press the MENU button to display the menu. Press the or |
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
button to select “Picture”, then press the ENTER button. |
|
|
2. |
|||||||
|
|
Press the ENTER button again, to select “Mode”. |
|||||||
|
|
|
|
|
|
|
|
|
Press the ENTER button again. |
You can also press the P.MODE button on the remote control to select one of the picture settings.
3. Press the or button to select the desired picture effect. Press the ENTER button.
4.Press the EXIT button to exit.
Dynamic: Selects the picture for high-definition in a bright room.
Standard: Selects the picture for optimum display in a normal environment.
Movie: Selects the picture for comfortable display in a dark room.
Custom: Select to view your favorite display settings.
(Refer to “Adjusting the Custom Picture”)
The Picture mode must be adjusted separately for each input source.
You can return to the factory defaults picture settings by selecting the “Reset”. (Refer to “Resetting the Picture Settings to the Factory Defaults” on page 14)
Adjusting the Custom Picture
Your set has several settings which allow you to control picture quality.
1. To select the desired picture effect, follow the
“Changing the Picture Standard” instructions number 1 to 4.
|
|
|
2. |
Press the |
or |
button to select a particular item. |
|
|
|
|
Press the ENTER button. |
||
|
3. |
Press the |
or |
button to decrease or increase the value of a |
||
|
|
|
|
particular item. Press the ENTER button. |
||
4.Press the EXIT button to exit.
Contrast: Adjusts the lightness and darkness between objects and the background.
Brightness: Adjusts the brightness of the whole screen.
Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.
Colour: Adjusts the colours, making them lighter or darker.
Tint (NTSC only): Adjusts the colour of objects, making them more red or green for a more natural look.
The adjusted values are stored according to the selected Picture mode.
In PC Mode, Only “Contrast”, “Brightness” and “Colour” can be adjusted
English-12
Changing the Colour Tone
You can select the most comfortable colour tone to your eyes.
1. To select the desired picture effect, follow the
“Changing the Picture Standard” instructions number 1 to 4 on page 12.
|
|
|
2. |
Press the |
or |
button to select “Colour Tone”, then press the ENTER button. |
||
|
|
|
||||||
|
3. |
Press the |
or |
button to select the desired colour tone setting. |
||||
|
|
|
|
|
Press the ENTER button. |
|
||
|
4. |
Press the EXIT button to exit. |
|
|||||
|
|
|
|
|
|
|||
|
|
|
|
Cool2: Makes the colour temperature bluer |
Warm1: Makes whites reddish. |
|||
|
|
|
|
|
than “Cool1” menu. |
Warm2: Makes the colour temperature |
||
|
|
|
|
Cool1: Makes whites bluish. |
redder than “Warm1” menu. |
|||
|
|
|
|
Normal: Keeps whites white. |
|
|||
|
|
|
|
|
|
|
|
|
The adjusted values are stored according to the selected Picture mode.
Adjusting the Color Tone with the Preferred Color Component
You can adjust a picture’s color tone with your preferred color component.
|
|
|
1. |
To select the desired picture effect, follow the |
||
|
|
|
|
“Changing the Picture Standard” instructions number 1 to 4 on page 12. |
||
|
|
|
|
|||
|
|
Press the |
or |
button to select “Colour Manager”, then press the ENTER |
||
|
|
|
2. |
|||
|
|
|
||||
|
3. |
button. |
|
|
||
|
Press the |
or |
button to select a particular item. |
|||
|
|
|
|
Press the ENTER button. |
||
|
4. |
Press the |
or |
button to decrease or increase the value of a |
||
|
|
|
|
particular item. Press the ENTER button. |
||
5.Press the EXIT button to exit.
R Contrast: Lightens or intensifies the red component of the border between objects and the background.
G Contrast: Lightens or intensifies the green component of the border between objects and the background.
B Contrast: Lightens or intensifies the blue component of the border between objects and the background.
R Brightness: Adjusts the brightness of the red component for the entire screen.
G Brightness: Adjusts the brightness of the green component for the entire screen.
B Brightness: Adjusts the brightness of the blue component for the entire screen.
Reset: Resets all settings to the defaults.
You cannot select a "Colour Tone" in the "Colour Manager".
English-13
Resetting the Picture Settings to the Factory Defaults
You can return to the factory defaults picture settings.
1. To select the desired picture effect, follow the
“Changing the Picture Standard” instructions number 1 to 4 on page 12.
|
|
|
|
2. |
Press the or button to select “Reset”, then press the ENTER button. |
|
|
|
|
|
|
3. |
Press the EXIT button to exit. |
|
|
|
|
|
||
|
|
|
|
|
||
The “Reset” will be set for each picture mode.
Changing the Picture Size
You can select these options by simply pressing the P.SIZE button on the remote control.
You can select the picture size which best corresponds to your viewing requirements.
1. |
Press the MENU button to display the menu. Press the or button to |
|
select “Picture”, then press the ENTER button. |
2. |
Press the or button to select “Size”, then press the ENTER button. |
3. |
Select the required option by pressing the or button. |
|
Press the ENTER button. |
4.Press the EXIT button to exit.
Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
WIDE 4:3 : Magnify the size of the picture more than 4:3.
Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
4:3: This is the default setting for a video movie or normal broadcasting.
“Auto Wide” function is available only in "TV", "Ext1", "Ext2", "AV", and "S-Video" mode.
In PC Mode, only “16:9” and “4:3” mode can be adjusted. |
|
|
|
|
||||
Zoom : Select |
|
by pressing the or buttons. Use the |
or |
button to move the |
||||
picture up and down. After selecting |
|
, use the |
or |
button to magnify or |
||||
|
||||||||
reduce the picture size in the vertical direction. |
|
|
|
|
||||
WIDE 4:3 : Move the screen up/down using the |
or button after selecting the |
|
|
|||||
|
||||||||
by pressing the or ENTER button. |
|
|
|
|
|
|||
Changing the Auto Wide (4:3)
Ajusts the display picture size to 4:3 appropriate for input signal
1. Press the MENU button to display the menu. Press the or button to select “Picture”, then press the ENTER button.
2. |
Press the or button to select “Auto Wide (4:3)”, then press the |
|
ENTER button. |
3. |
Select the required option by pressing the or button. |
|
Press the ENTER button. |
4.Press the EXIT button to exit.
These functions don’t work in "Component", "PC", "HDMI1", and "HDMI2" mode.
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
WIDE 4:3 : Magnify the size of the picture more than 4:3.
Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
4:3: This is the default setting for a video movie or normal broadcasting.
English-14
Freezing the Current Picture
Press the STILL button to freeze a moving picture into a still one.
Press again to cancel.
Digital Noise Reduction
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen.
1. |
Press the MENU button to display the menu. Press the or button to |
||
|
select “Picture”, then press the ENTER button. |
||
2. |
Press the |
or |
button to select “Digital NR”, then press the ENTER button. |
3. |
Press the |
or |
button to select “On” or “Off”. Press the ENTER button. |
4.Press the EXIT button to exit.
DNIe Demo (Digital Natural Image engine)
Samsung’s new technology brings you more detailed images with
contrast and white enhancement. A new image compensation algorithm gives viewers brighter and clearer images. DNIe technology will match every signal to your eyes. You can see how DNIe improves the picture by setting DNIe Demo mode to On.
1. |
Press the MENU button to display the menu. Press the or button to |
||
|
select “Picture”, then press the ENTER button. |
||
2. |
Press the |
or |
button to select “DNIe Demo”, then press the ENTER button. |
3. |
Press the |
or |
button to select “On” or “Off”. Press the ENTER button. |
4.Press the EXIT button to exit.
These functions don’t work in PC mode.
The DNle Demo is designed to show the difference between the regular and
DNIe pictures.
By default, the product displays the picture with DNle applied.
English-15
Changing the Colour Space
Colour space is a colour matrix composed of red, green, and blue colours. Select your favorite colour space and experience the world of natural colour.
1. |
Press the MENU button to display the menu. Press the |
or |
button to |
|||
|
2. |
select “Picture”, then press the ENTER button. |
|
|
||
|
|
|
||||
|
Press the |
or |
button to select “Colour Space”, then press the ENTER button. |
|||
|
||||||
3. |
Press the |
or |
button to select “Wide” or “Auto”. |
|
|
|
Press the ENTER button.
4.Press the EXIT button to exit.
Wide : Wide Colour Space offers deep and rich colour tone.
Auto : Auto Colour Space automatically adjusts to natural colour tone based on program sources.
Changing the LCD 100Hz
You can experience more natural pictures and clearer texts without motion blur even in fast moving scenes.
1. |
Press the MENU button to display the menu. Press the or button to |
|||
|
|
select “Picture”, then press the ENTER button. |
||
|
2. |
Press the |
or |
button to select “LCD 100Hz”, then press the ENTER button. |
|
||||
|
||||
3. |
Press the |
or |
button to select “On” or “Off”. Press the ENTER button. |
|
4.Press the EXIT button to exit.
English-16
Viewing the Picture In Picture (PIP)
Press the PIP button on the remote control repeatedly to activate or deactivate the “PIP”.
You can display a sub picture within the main picture of set
programme or video input. In this way, you can watch the picture of set programme or video input from any connected equipment while watching the main picture.
1. |
Press the MENU button to display the menu. Press the or button to |
|
select “Picture”, then press the ENTER button. |
2. |
Press the or button to select “PIP”, then press the ENTER button. |
3.Press the ENTER button again.
Press the |
or |
button to select “On”, then press ENTER button. |
If the PIP is activated, the size of the main picture turns to “16:9”. |
||
4. Press the |
or |
button to select “Source”, |
then press ENTER button. Select a source of the sub picture by |
||
pressing the |
or |
button and press the ENTER button. |
The sub picture can serve different source selections based on what the main picture is set to.
5. |
Press the |
or |
button to select “Swap”. |
|
To interchange the main picture and the sub picture, select “Swap” option and |
||
|
press the ENTER button. |
||
|
The main picture and the sub picture are interchanged. |
||
|
If main picture is in “PC” mode, “Swap” is not available. |
||
6. |
Press the |
or |
button to select “Size” of the sub picture and then |
|
press the ENTER button. Select a size of the sub picture by |
||
|
pressing the |
or |
button and then press the ENTER button. |
If main picture is in “PC” mode, “Size” is not available.
7. |
Press the |
or |
button to select “Position”, then press the ENTER |
|
button. Select the position of the sub picture by pressing the or |
||
|
button and then press the ENTER button. |
||
8. |
Press the |
or |
button to select “Programme” and then press the ENTER |
|
button. You can select the channel that you want to view through sub picture |
||
|
by pressing the |
or button. |
|
|
Press the ENTER button. |
||
The “Programme” can be active when the sub picture is set to TV.
9.Press the EXIT button to exit.
You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke.
Source: Used to select a source of the sub picture. |
Size: Used to select a size of the sub picture. |
Swap: Used to interchange the main picture and the |
Position: Used to move the sub picture. |
sub picture. |
Programme: Used to Change the sub picture. |
|
|
PIP Settings (O: PIP operates, X: PIP doesn’t operate)
Main |
Sub |
TV |
Ext.1 |
Ext.2 |
AV |
S-Video |
Component |
PC |
HDMI1 |
HDMI2 |
TV |
|
X |
X |
X |
X |
X |
X |
X |
O |
O |
Ext.1 |
|
X |
X |
X |
X |
X |
X |
X |
O |
O |
Ext.2 |
|
X |
X |
X |
X |
X |
X |
X |
O |
O |
AV |
|
X |
X |
X |
X |
X |
X |
X |
O |
O |
S-Video |
X |
X |
X |
X |
X |
X |
X |
O |
O |
|
Component |
X |
X |
X |
X |
X |
X |
X |
O |
O |
|
PC |
|
O |
O |
O |
O |
X |
X |
X |
X |
X |
HDMI1 |
O |
O |
O |
O |
O |
O |
X |
X |
X |
|
HDMI2 |
O |
O |
O |
O |
O |
O |
X |
X |
X |
|
English-17
Changing the Sound Standard
You can also select these options by simply pressing the S.MODE button on the remote control.
You can select the type of the special sound effect to be used when watching a given broadcast.
1. Press the MENU button to display the menu. Press the or button to select “Sound”, then press the ENTER button.
2.Press the ENTER button again, to select “Mode”.
3. Select the required sound effect by pressing the or button repeatedly and then press the ENTER button.
4. Press the EXIT button to exit.
Standard: Selects the normal sound mode. |
Custom: Selects your custom sound settings. |
Music: Emphasizes music over voices. |
(Refer to “Adjusting the Sound Settings”) |
Movie: Provides live and full sound for movies.
Speech: Emphasizes voices over other sounds.
Adjusting the Sound Settings
The sound settings can be adjusted to suit your personal preferences.
1. Press the MENU button to display the menu. Press the or button to select “Sound”, then press the ENTER button.
2. |
Press the |
or |
button to select “Equalizer”, then press the ENTER button. |
3. |
Press the |
or |
button to select a particular item. |
|
Press the ENTER button. |
||
4. |
Press the |
or |
button to reach the required setting. |
|
Press the ENTER button. |
||
5.Press the EXIT button to exit.
If you make any changes to these settings, the Sound Mode is automatically switched to
“Custom”.
Setting the TruSurround XT (SRS TSXT)
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers.
TruSurround delivers a compelling,virtual surround sound experience through any two-speaker playback systems, including internal television speakers. It is fully compatible with all multichannel formats.
1. |
Press the MENU button to display the menu. Press the or button to |
||
|
select “Sound”, then press the ENTERbutton. |
||
2. |
Press the |
or |
button to select “SRS TSXT”, then press the ENTER button. |
3. |
Press the |
or |
button to select “On” or “Off”. Press the ENTER button. |
4. Press the EXIT button to exit.
You can also set these options simply by pressing the SRS button on remote control.
TruSurround XT, SRS and 
symbol are trademarks of
SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc.
English-18
Adjusting the Volume Automatically
Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed.
This feature allows you to automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
1. |
Press the MENU button to display the menu. Press the or button to |
||
|
select “Sound”, then press the ENTER button. |
||
2. |
Press the |
or |
button to select “Auto Volume”, then press the ENTER button. |
3. |
Press the |
or |
button to select “On” or “Off”. Press the ENTER button. |
4.Press the EXIT button to exit.
Selecting the Internal Mute
If you want to hear the sound through separate speakers, cancel the internal amplifier.
1. |
Press the MENU button to display the menu. Press the or button to |
|||
|
|
select “Sound”, then press the ENTER button. |
||
|
|
|||
2. |
Press the |
or |
button to select “Internal Mute”, then press the |
|
|
|
ENTER button. |
|
|
3. |
Press the |
or |
button to select “On” or “Off”. Press the ENTER button. |
|
4.Press the EXIT button to exit.
When “Internal Mute” is set to “On’, the Sound menus except for
“Sound Select” (in PIP mode) cannot be adjusted.
Listening to the Sound of the Sub Picture
During the PIP features activation, you can listen to the sound of the sub picture.
1. |
Press the MENU button to display the menu. Press the or button to |
|||
|
2. |
select “Sound”, then press the ENTER button. |
||
|
||||
|
Press the |
or |
button to select “Sound Select”, then press the ENTER button. |
|
|
||||
3. |
Press the |
or |
button to select “Sub”. Press the ENTER button. |
|
4.Press the EXIT button to exit.
Main: Used to listen to the sound of the main picture.
Sub: Used to listen to the sound of the sub picture.
You can select this option when the “PIP” is set to “On”.
English-19
Resetting the Sound Settings to the Factory Defaults
If Game Mode is On, the Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults.
1. |
Press the MENU button to display the menu. Press the or button to |
|
select “Sound”, then press the ENTER button. |
2. |
Press the or button to select “Reset”, then press the ENTER button. |
3. |
Press the EXIT button to exit. |
You can select this option when the “Game Mode” is set to “On”.
Connecting Headphones
You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room.
When you insert the head set jack into the corresponding port,
you can operate only "Internal Mute" and "Sound Select" (in PIP mode) in Sound menu. (Refer to “Selecting the Internal Mute” on page 19)
Prolonged use of headphones at a high volume may damage your hearing.
You will not receive sound from the speakers when you connect headphones to the system.
Selecting the Sound Mode
You can set the sound mode by pressing the “DUAL” button.
When you press it, the current sound mode is displayed on the screen.
|
|
Audio Type |
|
|
|
DUAL 1/2 |
Default |
|||
You can also set these options |
FM |
Mono |
|
|
|
MONO |
Automatic |
|||
Stereo |
|
|
STEREO ↔ MONO |
change |
||||||
simply by pressing the DUAL |
Stereo |
|
|
|
||||||
Dual |
|
|
DUAL 1 ↔ DUAL 2 |
DUAL 1 |
||||||
button on remote control. |
|
|
|
|||||||
|
|
Mono |
|
|
|
MONO |
Automatic |
|||
|
|
|
|
|
|
|
|
|
|
change |
|
NICAM |
Stereo |
|
|
MONO ↔ STEREO |
|||||
|
|
|
|
|||||||
|
Stereo |
|
|
|
|
|
|
|
|
|
|
Dual |
|
|
MONO ↔ DUAL 1 |
|
|
DUAL 1 |
|||
|
|
|
|
|
|
DUAL 2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
||
Setting and Displaying the Current Time
You can set the TV’s clock so that the current time is displayed when you press the INFO button. You must also set the time if you wish to use the automatic On/Off timers.
1. |
Press the MENU button to display the menu. Press the or button to |
|
select “Setup”, then press the ENTER button. |
2. |
Press the or button to select “Time”, then press the ENTER button. |
3.Press the ENTER button to select “Clock Set”.
4. |
To... |
Press the... |
|
|
|||
|
Move to “Hour” or “Minute” |
or |
button. |
|
Set the “Hour” or “Minute” |
or |
button. |
|
Press the ENTER button. |
|
|
5.Press the EXIT button to exit.
If you disconnect the power cord, you have to set the clock again.
You can also set hour and minute by pressing the number buttons on the remote control.
English-20
Setting the Sleep Timer
Press the SLEEP button on the remote control repeatedly until the appropriate time interval appears.
You can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode.
1. |
Press the MENU button to display the menu. Press the |
or |
button to |
||
|
select “Setup”, then press the ENTER button. |
|
|
||
2. |
Press the |
or |
button to select “Time”, then press the ENTER button. |
||
3. |
Press the |
or |
button to select “Sleep Timer”, then press the ENTER button. |
||
4. |
Press the |
or |
button repeatedly until the desired time appears |
||
(Off, 30, 60, 90, 120, 150, 180). Press the ENTER button.
5.Press the EXIT button to exit.
The TV automatically switches to standby mode when the timer reaches 0.
Switching the Television On and Off Automatically
You can set the On/Off timers so that the set will:
Switch on automatically and tune to the channel of your choice at
the time you select.
Switch off automatically at the time you select.
The first step is to set the television’s clock.
1. |
Press the MENU button to display the menu. Press the |
or button to |
|||||||||
|
|
|
|
|
|
|
2. |
select “Setup”, then press the ENTER button. |
|
||
|
|
|
|
|
|
|
Press the |
or |
button to select “Time”, then press the ENTER button. |
||
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
3. |
Press the |
or |
button to select “On Timer”, then press the ENTER button. |
|
|
|
|
|
|
|
|
4. |
Press the |
or |
button to adjust “Hour”, then press the |
button to |
|
|
|
|
|
|
|
|
move to the next step. Set other items using the same method as above. |
|||
|
|
|
|
|
|
|
|
When finished, press the ENTER button to return. |
|
||
5. |
|
||||||||||
Press the |
or |
button to select “Off Timer”, then press the ENTER button. |
|||||||||
6. |
Press the |
or |
button to adjust “Hour”, then press the |
button to |
|||||||
move to the next step. Set other items using the same method as above. When finished, press the ENTER button to return.
7.Press the EXIT button to exit.
You can also set hour and minute by pressing the number buttons on the remote control.
The "Activation" setting must be set to "Yes" in order for the timers to work.
English-21
Choosing Your Language
When you start using your set for the first time, you must select the language which will be used for displaying menus and indications.
1. |
Press the MENU button to display the on-screen menu. |
||
|
Press the |
or |
button to select “Setup”, then press the ENTER button. |
2. |
Press the |
or |
button to select “Language”, then press the ENTER button. |
3. |
Select a particular language by pressing the or button repeatedly. |
||
|
Press the ENTER button. |
||
You can choose one of 21 languages.
4.Press the EXIT button to exit.
Using Game Mode
When connecting to a game console such as PlayStationTM or XboxTM,
you can enjoy a more realistic gaming experience by selecting game menu.
|
1. |
Press the MENU button to display the menu. Press the or button to |
|||
|
|||||
|
|
select “Setup”, then press the ENTER button. |
|||
2. |
|||||
Press the |
or |
button to select “Game Mode”, then press the ENTER button. |
|||
3. |
Press the |
or |
button to select “On” or “Off”. Press the ENTER button. |
||
4. Press the EXIT button to exit.
To disconnect the game console and connect another external device, set Game to Off in the setup menu.
If you display the TV menu in Game mode, the screen shakes slightly.
Game Mode is not available in TV mode.
If Game Mode is On:
• Picture Mode and Sound Mode are automatically changed to Custom and users can not change the mode.
•Adjust the sound using the equalizer.
•The Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults.
English-22
Setting the Blue Screen Mode / Selecting the Melody
Blue Screen:
If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the "Blue Screen" mode to "Off".
Melody:
You can hear melody sound when the television is powered on or off.
1. |
Press the MENU button to display the menu. Press the or button to |
||
|
select “Setup”, then press the ENTER button. |
||
2. |
Press the |
or |
button to select “Blue Screen” or “Melody”. |
|
Press the ENTER button. |
||
3. |
Press the |
or |
button to select “On” or “Off”. |
|
Press the ENTER button. |
||
4.Press the EXIT button to exit.
Using the Energy Saving Feature
This function adjusts the brightness of the TV so as to reduce power consumption. When you watching TV at night, set the "Energy Saving " mode option to "High" so as to reduce the dazzling of your eyes as well as the power consumption.
|
1. |
Press the MENU button to display the on-screen menu. |
|||
|
|||||
|
|||||
|
|
Press the |
or |
button to select “Setup”, then press the ENTER button. |
|
2. |
|||||
Press the |
or |
button to select “Energy Saving”, then press the ENTER |
|||
|
|
button. |
|
|
|
3.Select the required option (Off, Low, Medium, High) by pressing
the or button. Press the ENTER button.
4.Press the EXIT button to exit.
Setting the Blue Eye
You can set the power of Blue LED to be on. If the power is off when
Blue Eye TV is off, the Blue LED goes off. This will save power and reduce eye fatigue.
1. |
Press the MENU button to display the on-screen menu. |
|||
|
|
Press the |
or |
button to select “Setup”, then press the ENTER button. |
|
|
|||
2. |
Press the |
or |
button to select “Blue Eye”, then press the ENTER button. |
|
3. |
Press the |
or |
button to select “On” or “Off”. Press the ENTER button. |
|
Off: LED(Blue) will not come on.
On: LED(Blue) will come on after you turn the TV off.
4.Press the EXIT button to exit.
English-23
Selecting the Source
You can select among external sources connected to your TV’s input jacks.
1. Press the MENU button to display the menu. Press the ENTER button, to select “Input”.
2.Press the ENTER button again, to select “Source List”.
When no external device is connected to your set, only “TV”, “Ext.1”, “Ext.2” are activated in the “Source List”. “AV”, “S-Video”, “Component”, “PC”,
“HDMI1” , “HDMI2” are activated only when they are connected to your set.
3. Select the required device by pressing the or button. Press the ENTER button.
Press the SOURCE button on the remote control to toggel between all the available source. TV mode can be selected by pressing the TV button, number buttons(0~9), and the P
/
button on the remote control. But it cannot be selected using the SOURCE button.
You can select PC mode by simply pressing the PC button on the remote control.
Editing the Input Source Names
Name the device connected to the input jacks to make your input source selection easier.
1. Press the MENU button to display the menu. Press the ENTER button, to select “Input”.
2. |
Press the |
or |
button to select “Edit Name”, then press the ENTER button. |
3. |
Press the |
or |
button to select the device that you wish to edit. |
|
Press the ENTER button. |
||
4. |
Press the |
or |
button to select the required device. |
|
Press the ENTER button. |
||
5.Press the EXIT button to exit.
English-24
Using the WISELINK Function
You can view stored photos (JPEG files) or play music files (MP3) using a memory card or USB storage media.
The "Photo" menu supports image files in the JPEG format only.
The "Music" menu supports sound files in the MP3 format only.
Compact Flash (CF) / Micro Driver (MD) / MAGICSTOR
Secure Digital Card (SD Card) / Smart Media Card (SM) /
Multimedia Card (MMC) / Memory Stick / MSPRO / XD
USB Mass Storage Class
The USB hub type is not available becuase using the Half-Speed USB can cause the hardware limitation. (Only the Full-Speed USB is available.)
Photo Printer
1.First, connect the memory card or USB storage media containing your files to the WISELINK terminal on the side of the TV.
Supported Memory Cards
|
|
|
|
|
Compact Flash (CF) |
Micro Driver (MD) |
MAGICSTOR |
Secure Digital Card |
Smart Media Card |
|
|
|
(SD Card) |
|
|
|
|
|
|
Multimedia Card (MMC) |
Memory Stick |
MSPRO |
XD |
|
|
|
|
|
|
Some types of Memory Cards or USB hosts, depending on the manufacturer, may not be supported.
2. Using the Remote Control Button in WISELINK Menu
Button |
Operations |
|
Move the cursor and select an item. |
|
Select the currently selected item. |
|
Play or pause the Slide Show or MP3 file. |
|
Stop the current function and return to the previous high-level menu. |
|
Run various functions from the Photo and Music menus. |
|
Stop the current slide show or MP3 file. |
|
Page Up or Down (file list item) |
|
Return to the previous menu |
English-25
Using the WISELINK Menu
This menu shows JPEG and MP3 files and folders saved on a memory card.
1.Press the MENU button to display the menu. Press the ENTER button, to select “Input”.
2. Press the |
or |
button to select “WISELINK”, then press the ENTER button. |
If the "Insert memory cards." message is displayed, check whether the memory card is correctly inserted into the WISELINK terminal on the side of the TV.
3. |
Press the |
or |
button to select the corresponding Memory Card, then press |
|
the ENTER button. |
||
|
A menu for selecting the format of the files saved on the selected |
||
|
Memory Card will be displayed. |
||
4. |
Press the |
or |
button to move to an item, |
then press the ENTER button.
5.To exit WISELINK, press the WISELINK button on the remote control.
You can select these options by simply pressing the WISELINK button on the remote control.
Using the PHOTO (JPEG) List
folder icon
photo icon
Move to the previous folder stage icon
This menu shows JPEG files and folders saved on a memory card.
1.Complete Steps 1 to 4 of "Using the WISELINK Menu".
2. Press the |
or |
button to select “Photo”, then press the ENTER button. |
The saved file information is displayed as a folder or file.
3. Press the , , and buttons to select a file, then press the ENTER button.
Pressing the button over a photo icon shows the currently selected photo in full screen.
Pressing the button over a folder icon shows the JPEG files included in the folder. 
The Menu is displayed. Select the View option to display a photo in the aspect ratio.
4.Press the INFO button to configure the options.
When the Photo List screen is displayed: "View", "Slide Show", "Copy", "Copy All files",
"Delete", "Delete All Files", "Print" 
When a full screen is displayed:
"Slide Show", "Rotate", "Zoom", "Copy", "Delete", "Print", "List"
5.To exit WISELINK, press the WISELINK button on the remote control.
• Moving to another photo may take a few seconds to load the file. At this point, the
icon will appear at the top left of the screen.
•This menu only shows files whose file extension is JPEG.
Files of other formats such as bmp or tiff will not be displayed.
•The files are displayed on a page. 15 thumbnail photos are displayed per page.
•The thumbnails are numbered from left to right and from top to bottom, from 1 to 15.
•Folders are displayed first and they are followed by all JPEG files in the current folder. The folders and JPEG files are sorted in alphabetical order.
You can select these options
by simply pressing the WISELINK
English-26
button on the remote control.
Using the Options Menu
"Slide Show":
Starts a slide show.
(Refer to “Selecting a Photo and Slide Show” on page 28)
"Rotate":
You can rotate images in full screen mode.
Images are rotated in the order of 90°, 180°, 270° and 0° (original state).
(Refer to “Rotating” on page 29)
You cannot save a rotated image.
"Zoom":
You can zoom into images in full screen mode.
Images are zoomed in on in the order of X2, X3, X4 and X1 (original size).
(Refer to “Zooming-in” on page 30)
You cannot save a zoomed-in on image.
"Copy", "Copy All files":
You can copy image files to a different memory card.
(Refer to “Copying Image Files” on page 31)
"Delete", " Delete All Files":
You can delete selected image files.
(Refer to “Deleting Image Files” on page 31)
"Print":
You can print image files directly with your printer.
(Refer to “Printing a Photo” on page 32)
"List":
Displays the stored files and folders and file info.
The “File Error” message appears on the screen in the following situations:
•When the file actually has an error
•If the target memory cannot be writtien to when copying files
•If the target memory has not enough space when copying files
English-27
Viewing Photo File Information
When selecting a photo file, the photo file information is displayed on the left in the TV screen, such as the resolution, the date modified and the order of the file in the current directory.
Such as the resolution
File size
Date modified
Order of the file in the current directory
Selecting a Photo and Slide Show
This menu shows JPEG files and folders saved on a memory card.
1. Complete Steps 1 to 4 of "Using the WISELINK Menu". (Refer to page 26)
2. Press the |
or |
button to select “Photo”, then press the ENTER button. |
The saved file information is displayed as a folder or file.
3. Press the INFO button.
4. Press the |
or button to select “Slide Show”, then press the ENTER button. |
You can select these options
by simply pressing the WISELINK button on the remote control.
The Menu is displayed. Select the View option to display a photo in the aspect ratio.
• Slide Show all files in the selected folder at a predetermined interval.
•During the Slide Show, files are displayed in order from the currently shown file.
5.Press the INFO button during “Slide Show” to set the option ("Speed", "Background Music, "Background Music Setting", "List").
Press the |
or |
button to select the option, then press the ENTER button. |
6.To change the sub option, press the INFO button again to open the options window and select option you want to change, then press the ENTER button. Whenever you do this, the sub option on the screen is changed.
7.To exit WISELINK, press the WISELINK button on the remote control.
If the Slide Show feature is selected when a photo is displayed in full screen, other photos are also in the full screen size during the Slide Show.
Using the Menu during a Slide Show
Normal
"Speed":
Select to control the slide show speed.
Press the ENTER button to select the option "Normal", "Slow", or "Fast".
When the Speed feature is set to the Fast option, usually it takes about 7 seconds to slide to the next photo. The loading time may be longer depends on the size of the file.
On
"Background Music":
Select to determine whether to play an MP3 file during a slide show. Press the ENTER button to select the option "On" or "Off".
Set the Background Music Seetings first to use the “On” or “Off” function in this menu.
English-28
Loading...