SAMSUNG LE26A456, LE26A457 User Manual

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
AUSTRIA 0800-SAMSUNG (726-7864) www.samsung.com/at BELGIUM 0032 (0)2 201 24 18 www.samsung.com/be
CZECH REPUBLIC
DENMARK 70 70 19 70 www.samsung.com/dk EIRE 0818 717 100 www.samsung.com/ie FINLAND 030-6227 515 www.samsung.com/
FRANCE
GERMANY 01805 - SAMSUNG (726-7864) (€ 0,14/Min) www.samsung.com HUNGARY 06-80-SAMSUNG (726-7864) www.samsung.com ITALIA 800-SAMSUNG (726-7864) www.samsung.com LUXEMBURG 0035 (0)2 261 03 710 www.samsung.com/be NETHERLANDS 0900-SAMSUNG (726-7864) (€ 0,10/Min) www.samsung.com/nl NORWAY 815-56 480 www.samsung.com/no
POLAND
PORTUGAL 80820-SAMSUNG (726-7864) www.samsung.com/pt SLOVAKIA 0800-SAMSUNG (726-7864) www.samsung.com/sk SPAIN 902 10 11 30 www.samsung.com SWEDEN 0771-400 200 www.samsung.com/se SWITZERLAND 0800-SAMSUNG (726-7864) www.samsung.com/ch U.K 0845 SAMSUNG (7267864) www.samsung.com TURKEY 444 77 11 www.samsung.com ESTONIA 800-7267 www.samsung.ee LATVIA 800-7267 www.samsung.com/lv LITHUANIA 8-800-77777 www.samsung.lt KAZAHSTAN 8-10-800-500-55-500 www.samsung.kz KYRGYZSTAN 00-800-500-55-500 ­RUSSIA 8-800-555-55-55 www.samsung.com TADJIKISTAN 8-10-800-500-55-500 ­UKRAINE 8-800-502-0000 www.samsung.com UZBEKISTAN 8-10-800-500-55-500 www.samsung.uz
Customer Care Centre
844 000 844 www.samsung.com/cz
3260 SAMSUNG (€ 0,15/Min) 08 25 08 65 65 (€ 0,15/Min)
0 801 801 881 022-607-93-33
Web Site
www.samsung.com
www.samsung.com/pl
LCD TV
user manual
BN68-01424A-00
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at
www.samsung.com/global/register
Model Serial No.
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.(See back cover for more information)
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
Watching the LCD TV in 4:3 format for a long period of time may leave traces of
effect to the screen. Damages caused by the above effect are not covered by the Warranty.
• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar
Contents
CONNECTING AND PREPARING YOUR TV
List of Parts ........................................................ 2
Installing the Stand
 
Installing the Wall Mount Kit
Viewing the Control Panel
Viewing the Connection Panel
Viewing the Remote Control
Installing Batteries in the Remote Control
Switching On and Off
Placing Your Television in Standby Mode........... 8
Viewing the Menus
Using the TOOLS Button
Plug & Play
SETTING THE CHANNELS
Storing Channels Automatically ........................11
Storing Channels Manually
Adding / Locking Channels
Sorting the Stored Channels
Assigning Channels Names
Fine Tuning Channel Reception
LNA (Low Noise Amplier)
SETTING THE PICTURE
Changing the Picture Standard ........................ 16
Adjusting the Custom Picture
Conguring Detailed Settings on the Picture
Resetting the Picture Settings to the
Factory Defaults ............................................... 18
Changing the Picture Options
SETTING THE SOUND
Sound Features ................................................ 21
Selecting the Sound Mode
Connecting Headphones (Sold separately)
SETTING THE TIME
Setting and Displaying the Current Time .......... 23
Setting the Sleep Timer
Switching the Television On and Off
Automatically .................................................... 24
FUNCTION DESCRIPTION
Choosing Your Language ................................. 24
Melody / Entertainment / Energy Saving
Selecting the Source
Editing the Input Source Names
Symbol Press Note One-Touch
............................................. 2
............................... 2
.................................. 3
........................... 4
............................... 7
.......... 8
......................................... 8
............................................. 9
.................................... 9
....................................................... 10
.............................. 12
.............................. 13
............................ 14
............................. 14
....................... 15
............................... 15
........................... 17
... 17
.......................... 19
............................... 22
..... 22
.................................... 23
......... 25
........................................ 26
...................... 27
Button
USING THE DTV FEATURE
Previewing the DTV Menu System .................. 28
Updating the Channel List Automatically
 
Updating the Channel List Manually
Editing Your Favourite Channels
Selecting Channel List
Displaying Programme Information
Viewing the EPG (Electronic Programme
Guide) Information ........................................... 33
Using the Scheduled List
Setting the Default Guide
Viewing All Channels and Favourite Channels
Adjusting the Menu Transparency
Setting up the Parental Lock
Setting the Subtitle
Setting the Subtitle Mode
Selecting the Audio Format
Selecting the Audio Description
Selecting the Digital Text (UK only)
Selecting the Time Zone (Spain only)
Viewing Product Information
Checking the Signal Information
Upgrading the Software
Viewing Common Interface
Selecting the CI (Common Interface) Menu
Resetting
Selecting the Preferred Language
(Subtitle, Audio or Teletext) .............................. 42
Preference ........................................................... 43
.......................................................... 42
..................................... 32
................................. 34
................................. 34
............................ 36
........................................... 37
................................. 37
.............................. 37
............................ 39
................................... 40
.............................. 41
.......... 29
................ 29
...................... 30
.................. 32
.... 35
.................... 35
....................... 38
.................. 38
.............. 39
...................... 40
..... 41
SETTING THE PC
Setting up Your PC Software
(Based on Windows XP) .................................. 44
Display Modes
Setting up the TV with your PC
ABOUT ANYNET
What is Anynet+? ............................................ 46
Connecting Anynet+ Devices
Setting Up Anynet
Scanning and Switching between Anynet+
Devices ............................................................ 48
Recording
Listening through a Receiver
Check Points before Requesting Service
.................................................. 44
........................ 45
+
+
..........................................
......................................................... 50
........................... 46
47
........................... 50
......... 51
RECOMMENDATIONS FOR USE
Teletext Feature ............................................... 52
Wall-Mount Adjustment (Sold separately)
(depending on the model) ................................ 54
Using the Anti-Theft Kensington Lock
(depending on the model) ................................ 55
Troubleshooting: Before Contacting
Service Personnel ............................................ 56
Technical and Environmental Specications
... 57
English
English - 1

List of Parts

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
M4XL16
Remote Control
& Batteries
(AAA x 2)
Owner’s Instructions  Warranty card  Safety Guide  Registration Cards
Warranty card / Safety Guide /
➣ ➣
The stand and stand screw may not be included depending on the model.
Power Cord Cover-Bottom
Registration Cards (Not available in all locations)
Stand Screw
X 4
Stand Cleaning Cloth

Installing the Stand

2
1
1. Connect your LCD TV and the stand.
Two or more people should carry the TV.
Make sure to distinguish between the front and back of the stand when assembling them.
2. Fasten two screws at position 1 and then fasten two screw at position 2.
Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed
down, it may lean to one side. The stand is installed for models with the screen size of 37 inch and above.

Installing the Wall Mount Kit

Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.
Remove the stand and cover the bottom hole with a
cap and fasten with two screws.
English - 2

Viewing the Control Panel

Side Panel buttons
1
2
3
4
5
6
The product colour and shape may vary depending on the model.
1 SOURCE Toggles between all the available input
sources (TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI1, HDMI2, HDMI3, DTV). In the on-screen menu, use this button as you use the ENTER button on the remote control.
2 MENU Press to see an on-screen menu of your TV’s features.
3 Press to decrease or increase the volume. In the on-screen menu, use the buttons as you use the ◄ and ► buttons on the remote control.
4 Press to change channels. In the on-screen
menu, use the buttons as you use the ▲ and ▼ buttons on the remote control. (Without the Remote Control, you can turn on the TV by using the Channel buttons.)
(Power)
5
Press to turn the TV on and off. 6 Remote Control Sensor
Aim the remote control towards this spot on the TV.
7 Power Indicator Blinks and turns off when the power is on and lights up in stand-by mode.
8 Speakers
88
7
English - 3

Viewing the Connection Panel

LE40A456, LE40A457, LE40A455
[TV Rear Panel]
2 3 54 61
Power Input
!@
LE26A456, LE26A457, LE32A456, LE32A457, LE32A455, LE37A456, LE37A457
[TV Rear Panel]
4 3 5 @
!
[TV Side Panel]
[TV Side Panel]
7
3
8
9
0
7
1
6
2
The product colour and shape may vary depending on the model.
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
➣ ➣
When connecting an external device, match the colour of the connection terminal to the cable.
English - 4
Power Input
0
3
8
9
1 PC IN [PC] / [AUDIO]
-
Connect to the video and audio output jack on your PC.
2 COMPONENT IN
-
Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD.
-
If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("P
-
The P
R, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y
R", "PB", "Y") on your set.
and R-Y or Y, Cb and Cr.
-
Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD.
3 HDMI IN 1, HDMI IN 2, HDMI IN 3
Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD
-
players) No additional Audio connection is needed for an HDMI to HDMI connection.
-
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
-
What is HDMI?
-
“High Denition Multimedia interface” allows the transmission of high denition digital video data
and multiple channels of digital audio.
-
The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.
DVI IN(HDMI2) [R-AUDIO-L]
-
DVI audio outputs for external devices.
Supported modes for HDMI/DVI and Component
HDMI/DVI 50Hz HDMI/DVI 60Hz
Component O O O O O O
480i 480p 576i 576p 720p 1080i
X X X O O O X O X X O O
4 AUDIO OUT [R-AUDIO-L]
-
Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends
to corresponding audio in connectors on the Amplier or DVD Home Theatre.
5 ANT IN To view television channels correctly, a signal must be received by the set from one of the following
sources:
An outdoor aerial / A cable television network / A satellite network
-
6 SERVICE
LE26A456, LE26A457
-
Connector for SERVICE only.
-
LE32A456, LE32A457, LE32A455, LE37A456, LE37A457, LE40A456, LE40A457, LE40A455
Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing angle using your remote control.
English - 5
7 COMMON INTERFACE Slot
When CI Card isn’t inserted in some channels, "Scrambled
-
Signal" is displayed on the screen. The pairing information containing a telephone number, CI
-
Card ID, Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.
-
When the channel information conguration has nished, the
message "Updating Completed" is displayed, indicating that the channel list is now updated.
You must obtain a CI Card from a local cable service provider.
Remove the CI Card by carefully pulling it out with your hands since dropping the CI Card may cause damage to it.
Insert the CI-Card in the direction marked on it.
The place of the COMMON INTERFACE Slot may be different depending on its model.
S-VIDEO or VIDEO / R-AUDIO-L
8
Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or
-
Camcorder. Connect RCA audio cables to "R-AUDIO-L" on your set and the other ends to corresponding audio
-
out connectors on the A/V device.
9 Headphones jack
-
Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from the built-in speakers will be disabled.
0 Kensington Lock (depending on the model)
The Kensington lock (optional) is a device used to physically x the system when used in a public
-
place. If you want to use a locking device, contact the dealer where you purchased the TV.
-
The location of the kensington lock may be different depending on its model.
-
DIGITAL AUDIO OUT (OPTICAL)
!
Connect to a Digital Audio Component.
-
When the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the TV
outputs 2 channel audio only. If you want to hear 5.1 channel audio, connect the Optical jack on
the DVD player or Cable/Satellite Box directly to an Amplier or Home Theater, not the TV.
@ EXT 1, EXT 2
Connector
EXT 1 EXT 2
-Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
Video Audio (L/R) RGB Video + Audio (L/R)
Input Output
O O O O O
Only TV or DTV output is available.
Output you can choose.
English - 6
TOOLS

Viewing the Remote Control

1 Television Standby button 2
Selects the TV and DTV
mode directly 3 Number buttons for direct
channel access
4
One/Two-digit channel
selection
5 +: Volume increase
: Volume decrease
6 Temporary sound switch-off 7
Electronic Program Guide
(EPG) display 8 Use to quickly select
frequently used functions.
9
Use to see information on
the current broadcast 0 Colour buttons :
Use these buttons in the
Channel list, etc.
@
Press to select the optional
display and sound modes for sports, cinema and games.
# Use these buttons in the
DMA, and Anynet+. (
: This remote can be used to control recording on Samsung recorders with the Anynet+ feature)
$ Available source selection % Previous channel ^ P
: Next channel
P : Previous channel
&
Displays the main on-screen
menu
*
Displays the Channel List on
screen
(
Returns to the previous
menu ) Control the cursor in the
menu
a Exit the on-screen menu b Use this when connecting
a SAMSUNG DMA (Digital Media Adapter) device through an HDMI interface and switching to DMA mode.(The DMA button is optional.) For more information on the operating procedures, refer to the user manual of the DMA. This button is available when
+
“Anynet
(HDMI-CEC)" is “On”
(see page 47)
c Picture size selection d
Digital subtitle display
e
Selects the HDMI mode directly.
Teletext Functions
2 Exit from the teletext display 7 Teletext store 8 Teletext size selection 9 Teletext reveal 0 Fastext topic selection !
Alternately select Teletext,
Double, or Mix. $ Teletext mode selection
(LIST/FLOF)
% Teletext sub page ^
P : Teletext next page
P : Teletext previous page
& Teletext index ( Teletext hold a Teletext cancel
The performance of the remote control may be affected by bright light.
English - 7

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the
figure.
2. Install two AAA size batteries.
Make sure to match the "+" and "–" ends of the batteries with the
diagram inside the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time.
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special uorescent light or neon sign nearby?

Switching On and Off

The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
The standby indicator lights up on your set.
2. Press the button on your set. You also can press the POWER
the TV on. The channel that you were watching last is reselected automatically.
3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or
button on your set.
When you switch the set on for the very rst time, you will be asked to choose language in which the
menus are to be displayed.
4. To switch your set off, press the POWER button again.
button or the TV/DTV button on the remote control to turn

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1.
Press the POWER button on the remote control.
The screen is turned off and a red standby indicator appears on your set.
2. To switch your set back on, simply press the POWER , numeric buttons (0~9), TV/DTV button or channel up/down ( / ) button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial.
English - 8

Viewing the Menus

1. With the power on, press the MENU button.
The main menu appears on the screen. The menu’ s left side has icons: Picture, Sound, Channel, Setup, Input, Digital Menu.
2. Press the ▲ or ▼ button to select one of the icons. Then press the ENTER button to access the icon’s sub-
menu.
3. Press the EXIT button to exit.
The on-screen menus disappear from the screen after about one minute.

Using the TOOLS Button

You can use the TOOLS button to select your frequently used
functions quickly and easily. The “Tools” menu change depending on
which external input mode you are viewing.
1.
Press the TOOLS button.
The “Tools” menu will appear.
2. Press the ▲ or ▼ button to select a menu.
3. Press the ▲/▼/◄/►/ENTER buttons to display, change, or
use the selected items. For a more detailed description of each function, refer to the corresponding page.
• Anynet+ (HDMI-CEC), see page 47
• Picture Mode, see page 16
• Sound Mode, see page 21
• Sleep Timer, see page 23
• SRS TS XT, see page 21
• Energy Saving, see page 26
• Dual l-ll, see page 22
• Auto Adjustment, see page 45
TV
Mode : Standard Backlight 7 Contrast 95 Brightness 45 Sharpness 50 Colour 50
Tint G 50 R 50
Detailed Settings Picture Options Reset : OK
Move Enter Return
Anynet+ (HDMI-CEC) Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off Dual l-ll : Mono
Move Enter Exit
Picture
Tools
English - 9

Plug & Play

When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available.
Any functions related to Digital TV (DVB) will only work in
countries or areas where DVB-T (MPEG2) digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with the future coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not be available in some countries.
1.
Press the POWER button on the remote control.
The message "Start Plug & Play." is displayed with "OK" selected.
2. Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice.
3. Press the ◄ or ► button to select “Store Demo” or “Home Use”, then the ENTER button. We recommend setting the TV to "Home Use" mode for the best picture in your home
environment.
"Store Demo" mode is only intended for use in retail environments. If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use”
(Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds
4. The message "Check antenna input." is displayed with "OK" selected. Press the ENTER button. Please check that the antenna cable is connected correctly.
5. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice.
6. The message “Some DTV functions may not be available. Digital Scan?” is displayed.
Press the ◄ or ► button to select “Yes” or “No”, then press the
ENTER button.
Plug & Play
Start Plug & Play.
OK
Enter
 Yes
:
First an Analogue TV search is performed and then a Digital TV ch. auto search is per­formed.
No:
Only an Analogue TV search is performed.
This function is supported for all countries except for the following countries: France, Germany,
Italy, Netherlands, Spain, Switzerland, United Kingdom, Austria.
7.
The "Auto Store" menu is displayed with the "Start" selected. Press the
ENTER button.
The channel search will start and end automatically. The DTV channel scan menu appears and the DTV channel is automatically updated.
If the DTV channel is updated, the Source in the source list of the Input menu is automatically
changed to DTV.
After all the available channels are stored, the "Clock Set" menu appears.
Press the ENTER button at any time to interrupt the memorization process.
For detailed descriptions about DTV channel update, refer to page 29 of this manual. After all the available digital channels are stored, the screen to select a time zone is displayed depending on the country.
8. Press the ENTER button. Select the "Month", "Day", "Year", "Hour", or "Min" by pressing the ◄ or ► button. Set the "Month", "Day", "Year", "Hour", or "Min" by pressing the ▲ or ▼ button. You can also set the “Month”, “Day”, “Year”, “Hour” and "Min" by pressing the number buttons on
the remote control.
English - 10
9. Press the ENTER button to confirm your setting. The message “Enjoy your viewing” is displayed.
When you have finished, press the
ENTER button.
Even if the ENTER button is not pressed, the message will automatically disappear after
several seconds.
 Language  Country  Auto Store  Clock Set
: Select your language.
: Select your country.
: Automatically scans for and stores channels available in the local area.
: Sets the current time for the TV clock.
If you want to reset this feature...
Press the MENU button to display the menu.
1.
Press the ▲ or ▼ button to select "Setup" then press the
ENTER button.
TV
Plug & Play Language : English Time Melody : Off Entertainment : Off Energy Saving : Off
Setup
2. Press the ENTER button again, to select "Plug & Play".
For further details on setting up options, refer to the page 10.
The “Plug & Play” feature is only available in the TV mode.
Move Enter Return

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.
TV
Country : United Kingdom Auto Store Manual Store Channel Manager Sort Name Fine Tune LNA : Off
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
Move Enter Return
2. Press the ENTER button to select "Country".
3. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice.
Even though you have changed the country setting in this menu, the country setting for DTV is not changed. (Refer to page 29)
4. Press the ▲ or ▼ button to select "Auto Store", then press the ENTER button.
5.
Press the ENTER button.
The TV will begin memorizing all of the available channels.
Press the
ENTER button at any time to interrupt the memorization process and return to the
"Channel" menu.
After all the available channels are stored, the "Sort" menu appears. (refer to page 14)
6.
Channel
English - 11

Storing Channels Manually

Not available in DTV or external input mode.
You can store television channels, including those received via cable networks. When storing channels manually, you can choose:
Whether or not to store each of the channels found. The programme number of each stored channel which you wish
TV
Country : United Kingdom Auto Store Manual Store Channel Manager Sort Name Fine Tune LNA : Off
Channel
to identify.
Press the MENU button to display the menu.
1.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Manual Store", then press the ENTER button.
3. Select the required option by pressing the ▲ or ▼ button,
Move Enter Return
TV
Programme : P 1 Colour System : Auto Sound System : BG Channel : S 6 Search : 140 MHz Store : ?
Manual Store
then press the ENTER button.
4. When you are satisfied with your setting, press the ENTER button.
Press the EXIT button to exit.
5.
Move Enter Return
 Programme (Programme number to be assigned to a channel)
− Press the ▲ or ▼ button until you find the correct number.
You can also select the channel number directly by pressing the numeric buttons (0~9).
Colour System: Auto/PAL/SECAM/NTSC4.43
− Press the ▲ or ▼ button to select the required colour standard.
Sound System: BG/DK/I/L
− Press the ▲ or ▼ button to select the required sound standard.
 Channel (When you know the number of the channel to be stored)
− Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).
− Press the ► button, then press the ▲ or ▼ button to select the required number.
You can also select the channel number directly by pressing the numeric buttons (0~9). If there is abnormal sound or no sound, re-select the sound standard required.
 Search (When you do not know the channel numbers)
− Press the ▲ or ▼ button to start the search.
− The tuner scans the frequency range until the first channel or the channel that you selected is
received on the screen.
Store (When you store the channel and associated programme number)
− Set to "OK" by pressing the ENTER button.
Channel mode
P (Programme mode): When completing tuning, the broadcasting stations in your area have been
assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode.
C (Air channel mode): You can select a channel by entering the assigned number to each air
broadcasting station in this mode.
S (Cable channel mode): You can select a channel by entering the assigned number for each
cable channel in this mode.
English - 12

Adding / Locking Channels

Not available in DTV or external input mode.
Using the Channel Manager, you can conveniently lock or add channels.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Channel Manager", then press the ENTER button.
♦ Adding channels
Using the Channel List, you can add channels.
3. Select "Channel List" by pressing the ENTER button.
4. Move to the ( ) field by pressing the ▲, ▼, ◄ or ►
button, select a channel to be added, and press the
ENTER button to add the channel.
If you press the
next to the channel disappears and the channel is not added.
"
" is active when "Child Lock" is selected to "On".
♦ Locking channels
This feature allows you to prevent unauthorized users, such
as children, from watching unsuitable programmes by muting out video and audio.
5.
Press the ▲ or ▼ button to select "Child Lock", then press
the ENTER button.
6.
Select "On" by pressing the ▲ or ▼ button, then press the
ENTER button.
7.
Press the ▲ or ▼ button to select "Channel List",
then press the ENTER button.
8. Move to the " " field by pressing the ▲, ▼, ◄ or ► button, select a channel to be locked, and press the ENTER button.
If you press the
next to the channel disappears and the channel lock is cancelled. A blue screen is displayed when "Child Lock" is activated.
9.
Press the EXIT button to exit.
Select "On" or "Off" in "Child Lock" to easily turn the
channels which selected on " " to be active or inactive.
ENTER button again, the ( ) symbol
ENTER button again, the ( ) symbol
TV
Country : United Kingdom Auto Store Manual Store Channel Manager Sort Name Fine Tune LNA : Off
Move Enter Return
TV
Channel List Child Lock : Off
Move Enter Return
P 1 C3
Prog.
0 C-­1 C3 2 BBC 1 3 C74 4 C75 5 C76 6 S3 7 S4 8 S6 9 S7
Add Lock
Move Enter
Page Return
Channel
Channel Manager
Channel List
1 / 10
You can select these options by simply pressing the CH LIST
button on the remote control.
English - 13

Sorting the Stored Channels

This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store.
Not available in DTV or external input mode.
Press the MENU button to display the menu.
1.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Sort", then press the ENTER button.
3. Select the channel number that you wish to change by
pressing the ▲ or ▼ button repeatedly. Press the ENTER button.
The selected channel number and name are moved to
right side.
4. Press the ▲ or ▼ button to move to the position in which you would like to change and then press the ENTER button.
The selected channel is exchanged with the one previously stored to the chosen number.
5.
Repeat steps 3 to 4 for another channel to be sorted.
6.
Press the EXIT button to exit.

Assigning Channels Names

Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names.
Not available in DTV or external input mode.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Name", then press the
ENTER button.
3. If necessary, select the channel to be assigned to a new
name by pressing the ▲ or ▼ button. Press the ENTER button.
The selection bar is displayed around the name box.
4.
To...
Select a letter, number or symbol Move on the next letter Move back the previous letter Confirm the name
The following characters are available: Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters (+, -, *, /, space)
Repeat steps 3 to 4 for each channel to be assigned to a new name.
5.
Press the EXIT button to exit.
6.
Then...
Press the ▲ or ▼ button Press the ► button Press the ◄ button
ENTER button
Press the
TV
Country : United Kingdom Auto Store Manual Store Channel Manager Sort Name Fine Tune LNA : Off
Move Enter Return
TV
Prog. Ch. Name 0 C-- ----­ 1 C23 ----- 2 S06 ----­ 3 S07 ----­ 4 S09 ----­ 5 S12 ----­ 6 S13 ----­ 7 S14 ----­ 8 S17 ----­ 9 C21 -----
Move Enter Return
TV
Country : United Kingdom Auto Store Manual Store Channel Manager Sort Name Fine Tune LNA : Off
Move Enter Return
TV
Prog. Ch. Name 0 C-- -----
1 C23 -----
2 S06 ----­ 3 S07 ----­ 4 S09 ----­ 5 S12 ----­ 6 S13 ----­ 7 S14 ----­ 8 S17 ----­ 9 C21 -----
Move Enter Return
Channel
Channel
Sort
Name
English - 14

Fine Tuning Channel Reception

Use fine tuning to manually adjust a particular channel for optimal reception.
Not available in DTV or external input mode.
Use the number buttons to directly select the channel that
1.
you want to fine tune.
2. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
3. Press the ▲ or ▼ button to select "Fine Tune", then press
the ENTER button.
4. Press the ◄ or ► button to adjust the fine tuning.
Press the ENTER button.
5.
Press the EXIT button to exit.
Fine tuned channels that have been saved are marked
with an asterisk " number in the channel banner. And the channel number
" on the right-hand side of the channel
*
turns red. To reset the ne-tuning, select "Reset" by pressing the
or ▼ button and then press the ENTER button.
LNA (Low Noise Amplier)
If the TV is operating in a weak-signal area, the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal).
Not available in DTV or external input mode.
Press the MENU button to display the menu.
1.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "LNA", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Off" or "On". Press the ENTER button.
4. Press the EXIT button to exit.
TV
Country : United Kingdom Auto Store Manual Store Channel Manager Sort Name Fine Tune LNA : Off
Move Enter Return
P 1
Adjust Save Return
TV
Country : United Kingdom Auto Store Manual Store Channel Manager Sort Name Fine Tune LNA : Off
Move Enter Return
TV
Country : United Kingdom Auto Store Manual Store Channel Manager Sort Name Fine Tune
LNA : Off
Channel
Fine Tune
Reset
Channel
Channel
0
Off
On
English - 15
Move Enter Return

Changing the Picture Standard

You can select the type of picture which best corresponds to your viewing requirements.
Press the MENU button to display the menu.
1.
Press the ENTER button, to select "Picture".
2. Press the ENTER button again, to select "Mode".
3. Press the ▲ or ▼ button to select the desired picture effect.
Press the ENTER button.
4. Press the EXIT button to exit.
Dynamic: Selects the picture for high-definition in a bright
Standard:
Movie:
The Picture mode must be adjusted separately for each
input source.
room.
Selects the picture for optimum display in a
normal environment.
Selects the picture for comfortable display in a
dark room.
TV
Mode : Standard Backlight 7 Contrast 95 Brightness 45 Sharpness 50 Colour 50
Tint G 50 R 50
Detailed Settings Picture Options Reset : OK
Move Enter Return
TV
Mode : Standard
Backlight 7 Contrast 95 Brightness 45 Sharpness 50 Colour 50
Tint G 50 R 50
Detailed Settings Picture Options Reset : OK
Move Enter Return
Picture
Picture
Dynamic
Standard
Movie
Easy Setting
Press the TOOLS button on the remote control.
1.
2. Press the ▲ or ▼ button to select "Picture Mode".
3. Press the ◄ or ► button to select the required option.
4. Press the EXIT or TOOLS button to exit.
Tools
Anynet+ (HDMI-CEC)
Picture Mode ◄ Standard ►
Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off Dual l-ll : Mono
Move Adjust Exit
English - 16

Adjusting the Custom Picture

Your set has several settings which allow you to control picture quality.
1.
To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(On page 16)
2. Press the ▲ or ▼ button to select a particular item. Press the ENTER button.
3. Press the ◄ or ► button to decrease or increase the value of a particular item. Press the ENTER button.
4. Press the EXIT button to exit.
Backlight: Adjusts the screen brightness by adjusting the
LCD backlight brightness. (0~10)
Contrast:
Adjusts the lightness and darkness between
objects and the background.
Brightness: Adjusts the brightness of the whole screen.
Sharpness:
Adjusts the outline of objects to either
sharpen them or make them more dull.
Colour: Adjusts the colours, making them lighter or
darker.
Tint:
Adjusts the colour of objects, making them more red or green for a more natural look.
The adjusted values are stored according to the selected Picture mode.
In PC mode, you can only make changes to "Backlight", "Contrast" and "Brightness". (26, 32, 37 inch)
In PC mode, you can only make changes to "Contrast" and "Brightness".
In Analogue TV, Ext., AV, S-Video modes of the PAL system, you cannot use the "Tint" Function. You can return to the factory defaults picture settings by selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory Defaults" on page 18)
TV
Mode : Standard Backlight 7 Contrast 95 Brightness 45 Sharpness 50 Colour 50
Tint G 50 R 50
Detailed Settings Picture Options Reset : OK
Move Enter Return
Backlight
Move Adjust Return
(40 inch)
Picture
7
Conguring Detailed Settings on the Picture
You can set detailed picture settings.
1. Press the MENU button to display the menu.
Press the
ENTER button, to select "Picture".
2. Press the ENTER button to select “Mode”.
Press the ▲ or ▼ button to select “Standard” or “Movie”, then
press the
ENTER button.
3. Press the ▲ or ▼ button to select "Detailed Settings", then
press the ENTER button.
4. Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.
When you are satisfied with your setting, press the
5.
ENTER button.
Press the EXIT button to exit.
6.
"Detailed Settings" is available in "Standard" or "Movie"
mode. In PC mode, you can only make changes to
“Dynamic Contrast”, “Gamma” and “White Balance” from among the “Detailed Settings” items.
English - 17
TV
Mode : Standard Backlight 7 Contrast 95 Brightness 45 Sharpness 50 Colour 50
Tint G 50 R 50
Detailed Settings Picture Options Reset : OK
Move Enter Return
TV
Black Adjust : Off Dynamic Contrast Gamma : 0 Colour Space White Balance Flesh Tone : 0 Edge Enhancement : On
Move Enter Return
Picture
Detailed Settings
: Medium
: Native
Black Adjust: Off/Low/Medium/High You can directly select the black level on the screen to adjust the screen depth.
Dynamic Contrast: Off/Low/Medium/High You can adjust the screen contrast so that the optimal contrast is provided.
Gamma: -3 ~ +3 You can adjust the Primary Colour (Red, Green, Blue) Intensity.
Press the ◄ or ► button until you reach the optimal setting. ♦ Colour Space: Auto/Native/Custom
Colour space is a Colour matrix composed of red, green and blue colours.
Select your favourite Colour space to experience the most natural Colour.
Auto: Auto Color Space automatically adjusts to the most natural color tone based on program
sources.
Native: Native Color Space offers deep and rich color tone. Custom: Adjusts the color range to suit your preference.
Customizing the Colour Space
Colour: Red/Green/Blue/Yellow/Cyan/Magenta
Adjusts the Colour range to suit your preference.
“Colour” is available when “Colour Space” is set to “Custom”. Press the ▲ or ▼ button to select “Red”, “Green”, “Blue”, “Yellow”, “Cyan” or “Magenta”.
Press the
ENTER button.
Red/Green/Blue: In "Colour", you can adjust the RGB values for the selected colour.
Press the ▲ or ▼ button to select "Red", "Green" or "Blue" to change it. Press the
button.
ENTER
Press the ◄ or ► button to decrease or increase the value of a particular item. Press the
ENTER button.
Reset: Resets the colour space to the default values.
White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset You can adjust the colour temperature for more natural picture colours. R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.
Flesh Tone: -15 ~ +15
You can emphasize the pink 'flesh tone' in the picture.
Press the ◄ or ► button until you reach the optimal setting.
Changing the adjustment value will refresh the adjusted screen.
Edge Enhancement: Off/On
You can emphasize object boundaries in the picture.

Resetting the Picture Settings to the Factory Defaults

You can return to the factory defaults picture settings.
To select the desired picture effect, follow the
1.
"Changing the Picture Standard" instructions number 1 to 3 on page 16.
2. Press the ▲ or ▼ button to select "Reset", then press the ENTER button.
3. Press the ▲ or ▼ button to select "OK" or "Cancel".
Press the ENTER button.
4. Press the EXIT button to exit.
The "Reset" will be set for each Picture mode.
English - 18
TV
Mode : Standard Backlight 7 Contrast 95 Brightness 45 Sharpness 50 Colour 50
Tint G 50 R 50
Detailed Settings Picture Options
Reset : OK
Move Enter Return
Picture
OK
Cancel

Changing the Picture Options

1. Press the MENU button to display the menu. Press the ENTER button, to select "Picture".
2. Press the ▲ or ▼ button to select “Picture Options”, then press the ENTER button.
3. Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.
TV
Mode : Standard Backlight 7 Contrast 95 Brightness 45 Sharpness 50 Colour 50
Tint G 50 R 50
Detailed Settings Picture Options Reset : OK
Picture
4. When you are satisfied with your setting, press the
ENTER button.
5.
Press the EXIT button to exit.
In PC mode, you can only make changes to the
“Colour Tone” and “Size” from among the items in “Picture Options”.
Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2
Move Enter Return
TV
Picture Options
Colour Tone : Normal Size : Auto Wide Screen Mode : 16:9 Digital NR : Auto
DNle : Off HDMI Black Level
Blue Only Mode : Off
You can select the most comfortable colour tone to your eyes.
The adjusted values are stored according to the selected
Picture mode.
“Warm1” or “Warm2” is only activated when the picture mode is "Movie".
Size: Auto Wide/16:9/Wide Zoom/Zoom/4:3/Just Scan
Move Enter Return
You can select the picture size which best corresponds to your viewing requirements.
Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.Wide Zoom: Magnify the size of the picture more than 4:3.Zoom
: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
4:3: This is the default setting for a video movie or normal broadcasting.Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i) or
Component (1080i) signals are input.
"Auto Wide" function is available only in "TV", "DTV", "Ext.1", "Ext.2", "AV", and "S-Video" mode.
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
Settings can be adjusted and stored for each external device you have connected to an input of
the TV. Temporary image retention may occur when viewing a static image on the set for more than two
hours.
Wide Zoom
: Move the screen up/down using the ▲ or ▼ button after selecting the by
pressing the ► or ENTER button.
Zoom
: Select by pressing the ◄ or ►button.
Use the ▲ or ▼button to move the picture up and down. After selecting
,
use the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction.
After selecting “Just Scan” in HDMI (1080i) or Component (1080i) mode: Select by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture. Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER button. You can initialize the setting.
: Normal
O You can select these options by simply pressing the P.SIZE
button on the remote control.
English - 19
Screen Mode
: 16:9/ Wide Zoom/Zoom/4:3
When setting the picture size to "Auto Wide" in a 16:9 wide TV, you can determine the picture size
you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it.
16:9: Sets the picture to 16:9 wide modeWide Zoom: Magnify the size of the picture more than 4:3.Zoom
: Magnify the size of the picture vertically on screen.
4:3: Sets the picture to 4:3 normal mode.
This function is available in "Auto Wide" mode. This function is not available in "Component" or "HDMI" mode.
Digital NR: Off/Low/Medium/High/Auto
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction
feature to help reduce any static and ghosting that may appear on the screen.
When the signal is weak, select one of the other options until the best picture is displayed.
DNIe: Off/Demo/On
This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you
can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality.
DNIe™ (Digital Natural Image engine)
This feature brings you more detailed image with 3D noise reduction, detail enhancement,
contrast enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, more detailed image to you. DNIe™ technology will fit every signal into your eyes.
“DNIe” is only available in “Dynamic” mode.
HDMI Black Level: Normal/Low You can select the black level on the screen to adjust the screen depth.
This function is active only when the external input connects to HDMI(RGB signals).
Blue Only Mode: Off/On This function is for AV device measurement experts. This function displays the blue signal only by
removing the red and green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Colour and Tint of video equipment such as DVD players, Home Theaters, etc.
Using this function, you can adjust the Colour and Tint to preferred values appropriate to the signal
level of each video device using the Red/Green/Blue/Cyan/Magenta/Yellow Colour Bar Patterns, without using an additional Blue Filter.
“Blue Only Mode” is available when the picture mode is set to “Movie” or “Standard”.
English - 20

Sound Features

1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
ENTER button.
2. Select the required option by pressing the ▲ or ▼ button,
TV
Mode : Custom Equalizer SRS TS XT : Off Auto Volume : Off TV Speaker : On
Sound
then press the ENTER button.
3. When you are satisfied with your setting, press the ENTER
button.
4. Press the EXIT button to exit.
♦ Mode: Standard/Music/Movie/Speech/Custom
You can select the type of special sound effect to be used
when watching a given broadcast.
Easy Setting
1. Press the
TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select "Sound Mode".
3. Press the ◄ or ► button to select the desired sound mode.
4. Press the EXIT or TOOLS button to exit.
♦ Equalizer: Balance/100Hz/300Hz/1kHz/3kHz/10kHz
The sound settings can be adjusted to suit your personal
Move Enter Return
Tools
Anynet+ (HDMI-CEC) Picture Mode : Standard
Sound Mode ◄ Custom ►
Sleep Timer : Off SRS TS XT : Off Energy Saving : Off Dual l-ll : Mono
Move Adjust Exit
TV
R
Equalizer
preferences.
If you make any changes to these settings, the sound mode is automatically switched to "Custom".
L
Balance 100Hz 300Hz 1kHz 3kHz 10kHz
Move Adjust Return
♦ SRS TS XT: Off/On
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel
content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.
Easy Setting
Press the TOOLS button on the remote control.
1.
2. Press the ▲ or ▼ button to select "SRS TS XT".
3. Press the ◄ or ► button to select the "Off" or "On".
4. Press the EXIT or TOOLS button to exit.
Anynet+ (HDMI-CEC) Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off
SRS TS XT ◄ Off ►
Energy Saving : Off Dual l-ll : Mono
Tools
Move Adjust Exit
TruSurround XT, SRS and Symbol are trademarks of SRS Labs,
Inc.TruSurround XT technology is incorporated under license from SRS Labs, Inc.
English - 21
♦ Auto Volume: Off/On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume
every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
♦ TV Speaker: Off/On
If you want to hear the sound through separate speakers, cancel the internal amplifier.
The +, - and MUTE buttons do not operate when the "TV Speaker" is set to "Off".
➣ ➣
When "TV Speaker" is set to "Off", the Sound menus cannot be adjusted.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Selecting the Sound Mode

You can set the sound mode in the "Tools" menu. When you set to "Dual I-II", the current sound mode is displayed on the screen.
Press the TOOLS button on the remote control.
1.
2. Press the ▲ or ▼ button to select “Dual I-II".
3. Press the ◄ or ► button to select required option.
4. Press the ENTER button.
A2
Stereo
NICAM Stereo
Audio Type Dual
Mono MONO
Stereo STEREO
Dual DUAL
Mono MONO
Stereo MONO
Dual
MONO
1 ↔
DUAL
1/2
MONO
DUAL
2
STEREO
DUAL
1
2
Default
Automatic
change
DUAL 1
Automatic
change
DUAL 1
If the stereo signal is weak and an automatic switching occurs,
then switch to the Mono.
This function is only activated in stereo sound signal. It is
deactivated in mono sound signal.
This function is only available in Analogue TV mode.
Anynet+ (HDMI-CEC) Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off
Dual l-ll ◄ Mono ►
Move Adjust Exit
Tools

Connecting Headphones (Sold separately)

You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room.
When you insert the head set jack into the corresponding port, you
can operate only "Auto Volume" in Sound menu. Prolonged use of headphones at a high volume may damage your
hearing. You will not receive sound from the speakers when you connect headphones to the system.
The headphone volume and TV volume are adjusted differently.
English - 22
TV Side Panel

Setting and Displaying the Current Time

You can set the TV’s clock so that the current time is displayed when you press the INFO button. You must also set the time if you wish to use the automatic On/Off timers.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Time", then press the
ENTER button.
3. Press the ENTER button to select "Clock Set".
4.
To... Press the...
Move to "Month", "Day", "Year", "Hour" or "Minute" Set the "Month", "Day", "Year", "Hour" or "Minute"
Confirm the setting
◄ or ► button.
or button.
ENTER button.
5. Press the EXIT button to exit.
If you disconnect the power cord, you have to set the clock again. You can also set "Year", "Month", "Day", "Hour" and "Minute" by pressing the number buttons on
the remote control.
TV
Plug & Play Language : English Time Melody : Off Entertainment : Off Energy Saving : Off
Move Enter Return
TV
Month01Day
p
01
q
Hour00Minute
00
Move Adjust Return

Setting the Sleep Timer

Setup
Clock Set
Year
2008
You can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Time", then press the
ENTER button.
3. Press the ▲ or ▼ button to select "Sleep Timer", then press
the ENTER button.
4. Press the ▲ or ▼ button repeatedly until the desired time
appears (Off, 30, 60, 90, 120, 150, 180). Press the ENTER button.
5.
Press the EXIT button to exit.
The TV automatically switches to standby mode when the
timer reaches 0.
Easy Setting
1.
Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “Sleep Timer”.
3. Press the ◄ or ► button to select the minute.
4. Press the EXIT or TOOLS button to exit.
English - 23
TV
Plug & Play Language : English Time Melody : Off Entertainment : Off Energy Saving : Off
Move Enter Return
TV
Clock Set : 00 : 00
Sleep Timer :
Timer 1 : Timer 2 : Timer 3 :
Move Enter Return
Anynet+ (HDMI-CEC) Picture Mode : Standard Sound Mode : Custom
Sleep Timer ◄ Off ►
SRS TS XT : Off Energy Saving : Off Dual l-ll : Mono
Move Adjust Exit
Tools
Setup
Time
Off
30 60
90 120 150 180

Switching the Television On and Off Automatically

1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Time", then press the ENTER button.
TV
Plug & Play Language : English Time Melody : Off Entertainment : Off Energy Saving : Off
3. Press the ▲ or ▼ button to select "Timer 1", "Timer 2",
"Timer 3", then press the ENTER button. Three different On/Off Timer Settings can be made.
You must set the clock first.
4. Press the ◄ or ► button to select the required item below.
Press the ▲ or ▼ button to adjust to the setting satisfied. ♦ On Time: Select hour, minute, and "On"/"Off". (To activate
timer with the setting satisfied, set to "On".)
Off Time: Select hour, minute, and "On"/"Off". (To activate
timer with the setting satisfied, set to "On".)
Repeat: Select "Once", "Everyday", "Mon~Fri", "Mon~Sat",
Move Enter Return
TV
On Time
5
:
00 00 Off
6
Off Time
:
00 Off
00
Repeat
Once
Volume
10
► Move Adjust Return
Timer 1
or "Sat~Sun".
Volume: Select the desired turn on volume level.
You can set the hour and minute directly by pressing the number buttons on the remote control. Auto Power Off
When you set the timer On, the TV will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is on for too long time.

Choosing Your Language

Setup
When you start using your set for the first time, you must select the language which will be used for displaying menus and indications.
Press the MENU button to display the on-screen menu.
1.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Language", then press the ENTER button.
3. Select a particular language by pressing the ▲ or ▼ button
repeatedly. Press the ENTER button.
4. Press the EXIT button to exit.
English - 24
TV
Plug & Play Language : English Time Melody : Off Entertainment : Off Energy Saving : Off
Move Enter Return
Setup

Melody / Entertainment / Energy Saving

1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER button.
2. Select the required option by pressing the ▲ or ▼ button,
TV
Plug & Play Language : English Time Melody : Off Entertainment : Off Energy Saving : Off
Setup
then press the ENTER button.
3. When you are satisfied with your setting, press the ENTER button.
4. Press the EXIT button to exit.
Move Enter Return
Melody: Off/Low/Medium/High
The TV power on/off melody sound can be adjusted.
The Melody does not play
- When no sound is output from the TV because the MUTE button has been pressed.
- When no sound is output from the TV because the (Volume) button has been pressed.
- When the TV is turned off by Sleep Timer function.
Entertainment: Off/Sports/Cinema/Game
The “Entertainment” mode enables you to select the optimal display and sound for sports, cinema
and games.
- Off: Switch the "Entertainment" function off.
- Sports: Provides the optimal picture and sound quality for sports. You can enjoy more thrilling
Colour and sound.
- Cinema: Provides the optimal picture and sound quality for cinema. You can experience a richer
picture and enhanced sound.
- Game: Provides the optimal picture and sound quality for games. This mode accelerates the
playing speed when using an external game console connected to the TV.
If you set any of the three “Entertainment” modes to On, the settings will be locked and can not
be adjusted. If you want to make Picture and Sound mode adjustments, the “Entertainment”
mode must be turned off.
The “Entertainment” settings are saved for each input source.
If you set any of the three “Entertainment” modes to On, “SRS TS XT” function is not available.
O You can press the E.MODE button on the remote control
repeatedly to change the “Entertainment” setting.
English - 25
Energy Saving: Off/Low/Medium/High/Auto
This feature adjusts the screen brightness depending on the surrounding lighting conditions.
Off: Turns off the energy saving function.
Low: Sets the TV to low energy saving mode.
Medium: Sets the TV to medium energy saving mode.
High: Sets the TV to high energy saving mode.
Auto: Automatically adjusts the brightness of the TV screen in accordance with the scenes.
Easy Setting
1. Press the
TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “Energy Saving”.
3. Press the ◄ or ► button to select the "Off","Low",
"Medium", "High" or "Auto".
4. Press the EXIT or TOOLS button to exit.
This function is not available in “PC” mode.(40 inch)

Selecting the Source

You can select among external sources connected to your TV’s input jacks.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Input", then press the
ENTER button.
2. Press the ENTER button again, to select "Source List".
Available signal sources: TV, Ext.1, Ext.2, AV, S-Video,
Component, PC, HDMI1, HDMI2, HDMI3, DTV.
You can choose only those external devices that are
connected to the TV.
3. Select the required device by pressing the ▲ or ▼ button.
Press the ENTER button.
Press the SOURCE button on the remote control to toggle
O
between all the available source. TV mode can be selected by pressing the TV/DTV button, number buttons(0~9), and the P / button on the remote control.
Tools
Anynet+ (HDMI-CEC) Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off
Energy Saving ◄ Off ►
Dual l-ll : Mono
Move Adjust Exit
TV
Source List : TV Edit Name Anynet+(HDMI-CEC)
Move Enter Return
TV
TV
Ext.1 : ---­Ext.2 : ----
AV : ---­S-Video : ---­Component : ---­PC : ---­HDMI1 : ---­HDMI2 : ---­HDMI3 : ----
DTV
Move Enter Return
Input
Source List
O
You can also watch HDMI mode simply by pressing the HDMI
button on the remote control.
English - 26

Editing the Input Source Names

Name the device connected to the input jacks to make your input source selection easier.
Press the MENU button to display the menu.
1.
Press the ▲ or ▼ button to select "Input", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Edit Name", then press the ENTER button.
3. Press the ▲ or ▼ button to select the device that you wish to
edit. Press the ENTER button.
4. Press the ▲ or ▼ button to select the required device. Press the ENTER button.
Press the EXIT button to exit.
5.
TV
Source List : TV Edit Name Anynet+(HDMI-CEC)
Move Enter Return
TV
Ext.1 : ----
Ext.2 : ---- AV : ---- S-Video : ---- Component : ---- PC : ---- HDMI1 : ---- HDMI2 : ---- HDMI3 : ----
Edit Name
Move Enter Return
Input
----
VCR DVD
Cable STB
Satellite STB
PVR STB
AV Receiver
Game
q
English - 27

Previewing the DTV Menu System

The company does not guarantee the normal operation of the
DTV menu for countries other than the supported countries (France, Germany, Italy, Netherlands, Spain, Switzerland, United Kingdom, Austria) because only these country standards are supported. In addition, when the country of the broadcast stream differs from the country selected by the current user, the string appearing in the channel banner, Info, Guide, Channel Manager, etc. may not be displayed properly.
Available in DTV mode. Preset to the DTV mode by using the
TV/DTV button on your remote control. To help you navigate around the on-screen menu system and adjust the various
DTV
settings available, refer to the following illustration.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER button.
Guide Now & Next Guide
Full Guide Scheduled List Default Guide
Now/Next, Full Guide
DTV
Channel Country
Auto Store Manual Store Edit Favourite Channels Channel List
Setup Menu Transparency
All, Favourites, Default
High, Medium, Low, Opaque
DTV
Change PIN Parental Lock Subtitle Subtitle Mode Audio Format Audio Description
Digital Text Time Zone Common Interface System
Off, On Normal, Hard of hearing PCM, Dolby Digital Audio Description Off, On Volume
Disable, Enable
Application Info, CI Menu Product Information
DTV
Signal Information Software Upgrade Reset
Language Audio Language
Subtitle Language Teletext Language Preference
Primary Audio Language Secondary Audio Language Primary Subtitle Language Secondary Subtitle Language Primary Teletext Language Secondary Teletext Language (depending on the country)
The sub-items of the CI Menu may vary depending on the CAM model.
TV
Guide Digital Channel Setup Language
Now & Next Guide Full Guide Scheduled List Default Guide : Full Guide
Country : Auto Store Manual Store Edit Favourite Channels Channel List
Menu Transparency Change PIN Parental Lock Subtitle : Off
Subtitle Mode
Audio Language Subtitle Language Teletext Language Preference
Digital Menu
Move Enter Return
Guide
Move Enter Return
Channel
Move Enter Return
Setup : Medium
Move Enter Return
Language
Move Enter Return
United Kingdom
English - 28
Loading...
+ 452 hidden pages