Samsung HS3000 User Manual
Bluetooth
HEADSET
HS3000
Please read this manual before operating your headset, and keep it for future
reference.
Graphics used in this manual is for illustration purposes. The actual products may
vary.
Copyright
Copyright © 2010 Samsung Electronics
This user manual is protected under international copyri g ht laws.
No part of this user manual may be reproduced, distributed, translated, or
transmitted in any form or by any means, electronic or mechanical, including
photocopying, recording, or storing in any information storage and retrieval
system, without the prior written permission of Samsung Electronics.
Trademarks
•• SAMSUNG, and the SAMSUNG logo are registered trademarks of Samsung
Electronics.
•• Bluetooth® is a registered trademark of the Bluetooth SIG, Inc. worldwide.
More information about Bluetooth is available at www.bluetooth.com.
•• All other trademarks and copyrights are the property of their respective owners.
This product includes certain free/open source software.
The exact terms of the licenses, disclaimers, acknowledgements and notices are
available on the Samsung’s website opensource.samsung.com.
Please read all Safety precautions before using your headset to ensure safe and
proper use.
Safety precautions
•• When using your headset while driving, follow local regulations in the region you are in.
•• Never disassemble or modify your headset for any reason. Doing this may cause the
headset to malfunction or become combustible. Bring the headset to an authorised
service centre to repair it.
•• Keep your device and all accessories out of the reach of small children or animals.
Small parts may cause choking or serious injury if swallowed.
•• Avoid exposing your device to very cold or very hot temperatures (below 0 °C or above
45 °C).
Extreme temperatures can cause the deformation of the device and reduce the
charging capacity and life of your device.
•• Do not allow your device to get wet — liquids can cause serious damage. Do not
handle your device with wet hands. Water damage to your device can void your
manufacturer’swarranty.
•• Avoid using your device’s light close to the eyes of children or animals.
•• Do not use the device during a thunderstorm. Thunderstorms can cause the device
to malfunction and increase the risk of electric shock.
Excessive exposure to sound at high volumes can cause hearing
damage. Always turn the volume down before plugging the earphones
into an audio source and use only the minimum volume setting
necessary to hear your conversation or music.
Charging the headset
This headset has a rechargeable internal battery which is non-removable. Ensure
that you fully charge the battery before using the headset for the first time.
1 Plug the small end of the travel adapter into the charger jack.
2 Plug the large end of the travel adapter into a power outlet.
During charging, the indicator light will turn red. If charging does not begin,
unplug the travel adapter and plug it in again.
3 When the headset is fully charged, the indicator light changes to blue. Unplug
the travel adapter from the power outlet and the headset.
•• Use only Samsung-approved chargers. Unauthorised or Non-Samsung
chargers may cause an explosion or damage to the headset and could
invalidate any warranty on the product.
•• Over time, after many charging and discharging cycles, battery
performance will diminish. This is normal for all rechargeable batteries.
•• Never make or receive calls while charging, always disconnect your
headset from the charger and answer the call.
Checking the battery level
At the same time, press and hold the Volume down button and the Talk button.
Depending on the battery level, the indicator light flashes 5 times in one of the
following colors:
Battery level Indicator light color
Above 80% Blue
80 ~20% Violet
Below 20% Red
When the battery power is low
The headset beeps and the indicator light flashes red. Recharge the battery. If the
headset powers off during a call, the call will be automatically transferred to the
phone.
Wearing the headset
Place the headset on your ear. Depending on which ear you are going to wear the
headset, simply adjust the ear hook accordingly.
Using your headset
This section explains how to turn the headset on, pair and connect to the phone,
and use various functions.
•• Activated functions and features may differ depending on the phone type.
•• Some devices, especially those that are not tested or approved by Bluetooth
SIG, may be incompatible with your headset.
To ensure you get the best performance from your headset.
•• Keep the distance between your headset and device as small as possible
and avoid placing your body or other objects in the signals path.
•• If you usually use your mobile phone with your right hand, wear the headset
on your right ear.
•• Covering your headset or device could effect its performance so keep
contact to a minimum.
Turning the headset on or off
Slide the power switch to turn the headset on. The blue indicator light flashes 4
times.
Slide the power switch to turn the headset off. Both blue and red indicator lights
flash.
Using voice prompts
Voice prompts will inform you about the current status of the headset and usage
instructions.
To turn voice prompts on
With the headset turned on, press and hold the Volume up button for 4 seconds.
To turn voice prompts off
With the headset turned on, press and hold the Volume down button for 4
seconds.
To select languages
With the headset turned on, press and hold the Volume up and down button
simultaneously.
Pairing and connecting the headset
Pairing will create a unique and encrypted wireless link between two Bluetoothenabled devices, such as a Bluetooth phone and your Bluetooth headset.
To use the headset with other Bluetooth devices, the devices must be paired.
When trying to pair the two devices, keep the headset and the phone reasonably
close together. After pairing, you can connect the two devices.
Pairing and connecting the headset with a phone
1 Enter Pairing mode.
With the headset turned on, press and hold the Talk button until the
indicator light turns blue and stays lit after blinking.
When you turn on the headset for the first time, it automatically enters
Pairing mode.
2 Activate the Bluetooth feature on your phone and search for the headset (see
your phone’s user manual).
3 Select the headset (HS3000) from the list of devices found by your phone.
4 If requested, enter the Bluetooth PIN (0000, 4 zeros) to pair and connect the
headset to your phone.
•• Your headset supports the Simple Pairing feature which allows the
headset to be paired with a Bluetooth device without requesting a PIN. This
feature is available for devices that are compliant with Bluetooth version
2.1 or higher.
•• If your phone supports A2DP(Advanced Audio Distribution Profile), you
can also listen to music with your headset. You cannot control playback
using your headset.
Connecting with two Bluetooth phones
With the Multi-point feature activated, your headset can be connected with two
Bluetooth phones at the same time.
Loading...