Samsung HG32ND477S User Manual

Quick Setup Guide

Configure your TV

Picture Mode Standard

Choose a picture mode that best suits your viewing enviroment.

Select your information in all of the categories below.

TV Setup Complete!

Your TV is now ready to use

Auto Program

Antenna Both

Digital Cable System STD

Analog Cable System STD

Select current connected antenna.

To get channels, set the options below then select Scan.

Scan

Auto Program

Auto Program is channels for you...

Air 21

Stop

DTV Air0 Air DTV Cable Cable

0 0 0

Clock

-- : -- --

You can adjust your time to set DST, Time Zone and clock mode

Set current date and time

Clock Mode Auto

Date

-- / -- / ----

Time

-- : -- --

DST Off

Time Zone Eastern

To register this product please visit

www.samsung.com/register.

BN68-07044V-X0

List of Parts

STOP

Please do not return

this unit

If you are having problems operating this TV,

Please call;

US : 1-866-894-0524

CANADA : 1-800-726-7864

For web support please visit http://www.samsung.com/us/business

✎ Make sure that at least two people lift and move the LED TV. ✎ When connecting the stand, lay the product down on a soft surface, with the screen facing down, and then fasten the screws. ✎ The number of screws may differ depending on the model.

Viewing the Connection Panel

DATA

TV Controller

The TV’s Controller on the bottom right side of the TV, lets you control the TV without the remote control.

: Turns the TV on or off.

/ : Changes channels.

Control Menu

/ : Adjusts the volume.

: Switchs the available video sources.

List of Vendors and Compatible Data Cables Supplied with the TV

♦ Refer to the code label on the data cable.

Note the

labeled end.

Conrm the code on

the Code Label

Note the labeled end.

Remote Control (AA59-00817A)

& Batteries (AAA x 2)

Power Cord

Owner’s Instructions

Safety Guide

Installing the LED TV Stand

♦ HG32ND470S/HG32ND477S

Components

When installing the stand, use the provided components and parts.

Stand Screws

2 3

(M4 X L12) (2EA)

Data Cable

(BN39-00865B,BN39-01011E)

X 4 (M4 X L12)

Wall mount Adapter

(Depending on the Model)

(M4 X L12) (2EA)

AV IN

AUDIO

OUT

HDMI IN 2

(DVI)

EX-LINK

HDMI IN 1

ANT IN

HDMI IN 3

(ARC)

➣ The product color and shape may vary depending on the model.

1 AV IN 2 USB (5V 0.5A)/CLONING 3 HDMI IN 1, 2(DVI), 3(ARC) 4 ANT IN 5 DATA 6 EX-LINK 7 AUDIO OUT

Notice

When in Hotel mode (Interactive or Standalone), all Channel menu items in the Menu OSD except for the Channel List are deactivated. If you need to change the channel line up, use the Channel Setup item in the Hotel options menu.

Remote control sensor/TV Controller

✎ If you press it rst, the control menu appears. You can select the function by pressing and holding the TV’s controller. ✎ The product color and shape may vary depending on the model. ✎ With the TV’s Controller, you cannot perform other operations except for turning the TV on or off, changing the channel,

adjusting the volume, and switching the input source.

Standby mode

Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe and to

decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on vacation, for example). It is best to unplug the power cord.

Connecting the TV with an SBB or STB

ETH MODEM

1. Connect the [DATA] jack of the TV to the [ETH MODEM] jack of the STB (SBB) with the data cable.

✎ The “ETH MODEM” jack name that you connect the Data Cable to may differ depending on the SBB or STB type.

Vendor Cable code

Samsung OCC

Enseo Guest-Tek

NXTV BN39-01011B

nStreams BN39-01110A

MTI BN39-01011C

BN39-00865B

Hotel Plug & Play

The Hospital Plug & Play function, which automatically performs the Hospital Mode selection, Country Setup, Clock Setup, and

Picture Mode Setup, runs once when power is rst turned ON. Setup also runs automatically after you have executed a Service

Reset.

♦ Local Set

– Initially highlighted: US – If you press the Enter key after selecting Change,

youcan change the country.

– If the country is changed, the TV automatically turns

offand on.

– If you select the incorrect country, execute TV

Resetagain after entering the Service section of the HospitalMenu.

♦ Easy Set up OSD

– Initially highlighted: Interactive – If you select the Standalone Only button,

Standalonehospital mode is set by default and the “Standalonemode has been set” OSD appears for 3 seconds.

– TV enters into RF mode automatically after

displayingthe “Standalone mode has been set” OSD for 3 seconds.

– If you select Interactive mode, the Interactive

SetupMenu is displayed. Press the power off key to exit theInteractive menu.

– If you select Standalone setup mode, the “Select

yourLanguage” OSD appears.

♦ Select your Language OSD

– If you select Standalone setup from the “Select

HospitalTV Mode” OSD, the “Select Menu Language”

OSD appears. – Initially highlighted: English – Display time: OSD time out and operation are the

sameas Samsung’s consumer TV models. – If you press the Enter key, the “Configure your TV”

OSDappears

♦ Congure your TV OSD

– Initially highlighted: Standard. – The TV displays the Picture Mode OSD where you

canchoose Dynamic or Standard Picture mode.

♦ Auto Program OSD

– If you press the Enter key, the TV automatically

searches for channels.

– After the automatically searches for channels

complete,press the next button to continue.

♦ Set Clock Mode, DST(Daylight saving time), and

TimeZone OSD

– Initially highlighted: Clock Mode : Auto, DST : Off,

TimeZone : Eastern

– If the TV will be tuned to digital broadcast channels,

andthese channels transmit date and time information, setthe Clock Mode to Auto. The TV will set the date andtime automatically.

– If the TV will not be tuned to digital broadcast

channels,set the Clock Mode to Manual, and then set the dateand time on the TV manually.

– Set DST On or Off to apply or not apply daylight

savingtime to the TV.

– Select your time zone on the map appears.

♦ UI Scenario

Self Diagnosis for TV

Self Diagnosis for HTV

SW Update

Service Pattern

ATV cable AGC Gain

DTV OpenCable AGC Gain

Sound Bar Out

Contact Samsung

Standby LED

TV Reset

Change Locat Set if Located in North America, Latin America and Europe.

In other regions, Please press SKIP button move to the next step.

Current Localset : US

Change Skip

If you select Skip

Easy Set up

Intertactive

(Hotel Menu)

Standalone Setup

(Continue Setup)

Standalone Only

(End Setup)

If you select Standalone Setup

Select your Language

Select your language to start the on screen setup.

English

Español

Français

The Language Setting will be applied to Main Menu and not Plug and Play.

Select your language

Standalone

Hospitality Option Menu

appears.

Press Power OFF to exit.

Local Set

OFF

Default

OFF

If you select this, the setup process will be completed and go to hotel menu

Press the arrow buttons to move around the screen. Press the Enter button to select.

If you select TV Reset, the TV resets all values to their factory defaults and then displays the Hospital Plug & Play menu. Go to the first Hospital Plug & Play screen below.

If you select Change

If you select Interactive

Select Clock Mode, DST, and your Time Zone

Warning! TV might not function if local set is not correctly configured.

Countries List USA

If you don’t change the country of the Current Location

If you select

Standalone Only

Select Picture mode

Local Set

When Local set is changed, TV will turn off automatically to apply it.

TV will enter the RF mode.

Hospitality Option Menu

Interactive

appears.

If you change the country of the Current Location

The TV is automatically turned off and on.

Press Power OFF to exit.

Select the channel

band to use for Auto

Program

After Searching

channels.

Auto Program

Auto Program is incomplete. 0 channels are memorized

DTV Air0 Air DTV Cable Cable

0 0 0

Change Settings Scan Again

Sound Bar

♦ Samsung Sound-Bars and Hotel TVs in 2015

1. Samsung Sound-Bars and hospitality TVs support the ARC feature in HDMI 1.4. If you connect a compatible Samsung

Sound-Bar to a compatible Samsung hospitality TV using a single HDMI cable, guests can listen to the TV’s sound through the Sound-Bar.

2. The item of Sound bar Out in Hospitality Option Menu makes you control to where the TV sound is outputted when the TV

is turned on. – If Sound bar Out is On, the TV sound is automatically outputted in the Sound Bar device only whenever TV is turned on. – If Sound bar Out is Off, the TV sound is automatically outputted in the TV speaker only whenever TV is turned on.

3. Models supporting the ARC function are listed below:

– Sound-Bars: HW-E350/E450/E550

HW-F350/F355/FM35/F450/FM45/FM45C/ F550/F551/FM55/FM55C/F750/F75

♦ Setting the Sound-Bar to Hotel Mode.

4. Set the following Hotel menu options:

– Hotel option > System > Sound Bar Out = On. – Hotel option > Power On > Power On Volume = User Defined. – Hotel option > Power On > Power On Volume Num > Set greater than 0. – Hotel option > Power On > Max Volume > Set greater than 0.

5. Connect an HDMI cable from the HDMI OUT jack at the back of the Sound-Bar to the HDMI3 port (supporting ARC) on the

hospitality TV.

6. After the Sound-Bar is connected to the hospitality TV, when the TV turns on, the Sound-Bar automatically detects the TV,

and then automatically switches to Hotel Mode.

Sound Bar Hotel mode functional characteristics:

– Power On/Off is synchronized with the TV – HDMI_CEC defaults to On – Functions through the “HDMI OUT” port only – Disables the “Input mode” key on the VFD to prevent unexpected audio-source changes. – Acquires adjustable Power On and Max Volume settings from the TV’s Hotel option menu. The Sound-Bar’s Power On

Volume and Max Volume values, however, are ½ of the Power On Volume and Max Volume settings in the TV’s Hotel

options menu. – Example: If the TV’s Power On Volume=20 and Max Volume=90, then the Sound Bar’s Power On Volume=10 and Max

Volume=45.

Wall Mount Kit Specications (VESA)

Wall mount Adapter

(Depending on the Model)

Before installing any other wall mounting kit, assemble the wall mount adapter provided separately with the TV.

Install your wall mount on a solid wall perpendicular to the oor. If you are attaching the wall mount to building materials other

than plaster board, contact your nearest dealer. If installed on a ceiling or slanted wall, the TV may fall and cause severe personal injury.

➣ Standard dimensions for wall mount kits are shown in the table below. ➣ Samsung wall mount kits contain a detailed installation manual. All parts necessary for assembly are provided. ➣ Do not use screws that do not comply with the VESA standard screw specications. ➣ Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw

specications. Screws that are too long may cause damage to the inside of the TV set.

➣ For wall mounts that do not comply with the VESA standard screw specications, the length of the screws may differ

depending on the wall mount specications.

➣ Do not fasten the screws too rmly. This may damage the product or cause the product to fall, leading to personal injury.

Samsung is not liable for these kinds of accidents.

➣ Samsung is not liable for product damage or personal injury when a non-VESA or non-specied wall mount is used or the

consumer fails to follow the product installation instructions. ➣ Do not mount the TV at more than a 15 degree tilt. ➣ Always have two people mount the TV onto a wall.

Product Family

LED-TV 32 200 × 200 M8 4

TV size in

inches

VESA screw hole

specs (A * B) in

millimeters

Standard Screw

(Length*

Pitch in mm)

Quantity

Do not install your Wall Mount Kit while your TV is turned on. This may result in personal injury due to electric shock.

Licence

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & DTS Premium Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.

Manufactured under a license from U.S. Patent No’s: 6,285,767, 8,027,477, 5,319,713, 5,333,201, 5,638,452, 5,771,295, 5,970,152, 5,912,976, 7,200,236, 7,492,907, 8,050,434, 7,720,240, 7,031,474, 7,907,736 and 7,764,802. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & DTS Studio Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.

The terms HDMI and HDMI High-Denition Multimedia Interface, and the HDMI Logo are

trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

DivX Certied® to play DivX® video up to HD 1080p, including premium content.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an ofcial DivX Certied® device that has passed rigorous testing to verify that it plays DivX video. Visit divx.com for more information and software tools to convert your les into DivX videos.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certied® device must be registered in order to play purchased DivX Video-on-

Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more

information on how to complete your registration.

DivX®, DivX Certied® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under

license. Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274

Open Source License Notice

Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com) Open Source License Notice is written only English.

Dimensions

HG32ND470S/HG32ND477S

1 2

3 4 5 6

1 2 3 4 5 6 7 8 9

HG32ND470S HG32ND477S

745.4 699.7 394.3 433.9 442.2 466.6 37.3 69.0 150.5

Specications

Environmental onsiderations Operating Temperature Operating Humidity Storage Temperature Storage Humidity Model Name HG32ND470S / HG32ND477S Display Resolution 1366 x 768 Screen Size (Diagonal) Sound (Output) 5W x 2 Dimensions (WxDxH) Body With stand Weight Without Stand With Stand

➣ Design and specications are subject to change without prior notice. ➣ This device is a Class B digital apparatus.

WARNING: This product contains chemicals known to the State of California to cause cancer and reproductive toxicity.

50°F to 104°F (10°C to 40°C) 10% to 80%, non-condensing

-4°F to 113°F (-20°C to 45°C) 5% to 95%, non-condensing

32” Class

(31.5” measured diagonally)

745.4 x 69.0 x 442.2 mm

745.4 x 150.5 x 466.6 mm

3.97 kg

4.06 kg

(unit: mm)

[HD470S-ZC-QSG]BN68-07044V-X0L02.indd 1 2015-03-26  2:20:57