Please read this manual before using this device to ensure safe and proper use.
•
Descriptions are based on the device’s default settings.
•
Some content may differ from your device depending on the region, service provider,
model specifications, or device’s software.
•
Content (high quality content) that requires high CPU and RAM usage will affect the
overall performance of the device. Apps related to the content may not work properly
depending on the device’s specifications and the environment that it is used in.
•
Samsung is not liable for performance issues caused by apps supplied by providers other
than Samsung.
•
Samsung is not liable for performance issues or incompatibilities caused by edited
registry settings or modified operating system software. Attempting to customise the
operating system may cause the Gear or apps to work improperly.
•
Software, sound sources, wallpapers, images, and other media provided with this Gear
are licensed for limited use. Extracting and using these materials for commercial or other
purposes is an infringement of copyright laws. Users are entirely responsible for illegal
use of media.
•
Default apps that come with the Gear are subject to updates and may no longer be
supported without prior notice. If you have questions about an app provided with
the Gear, contact a Samsung Service Centre. For user-installed apps, contact service
providers.
•
Modifying the Gear’s operating system or installing softwares from unofficial sources may
result in Gear malfunctions and data corruption or loss. These actions are violations of
your Samsung licence agreement and will void your warranty.
4
Basics
Maintaining water and dust resistance
The device may be damaged if water or dust enters the device. Follow these tips carefully to
prevent damage to the device and to maintain the water- and dust-resistant performance of
the device.
•
Do not immerse the device in water deeper than 1.5 m and keep it submerged for more
than 30 minutes.
•
Do not immerse the device in water for extended periods.
•
Do not expose the device to water moving with force, such as water running from a tap,
ocean waves, or waterfalls.
•
If the device is exposed to freshwater, dry it thoroughly with a clean, soft cloth. If the
device is exposed to any liquid other than freshwater, rinse the device with freshwater
immediately and dry it thoroughly with a clean, soft cloth. Failure to rinse the device
in freshwater and dry it as instructed may cause the device to suffer from operability
or cosmetic issues.
•
If the device is dropped or receives an impact, the water-and dust-resistant features of
the device may be damaged.
•
The touchscreen and other features may not work properly if the device is used in water
or in other liquids.
•
Your device has been tested in a controlled environment and certified to be waterand dust-resistant in specific situations (meets requirements of classification IP68 as
described by the international standard IEC 60529 - Degrees of Protection provided
by Enclosures [IP Code]; test conditions: 15 - 35°C, 86 - 106 kPa, 1.5 metre, 30 minutes).
Despite this classification, your device is not impervious to water damage in any
situation.
5
Basics
Instructional icons
Warning: situations that could cause injury to yourself or others
Caution: situations that could cause damage to your device or other equipment
Notice: notes, usage tips, or additional information
Package contents
Check the product box for the following items:
•
Gear
•
Wireless charger dock
•
Strap
•
Quick start guide
•
The items supplied with the Gear and any available accessories may vary
depending on the region or service provider.
•
The supplied items are designed only for this Gear and may not be compatible
with other devices.
•
Appearances and specifications are subject to change without prior notice.
•
You can purchase additional accessories from your local Samsung retailer. Make
sure they are compatible with the Gear before purchase.
•
Some accessories, such as docking devices, may not have the same water- and
dust-resistance certification.
•
Use only Samsung-approved accessories. Using unapproved accessories may cause
the performance problems and malfunctions that are not covered by the warranty.
•
Availability of all accessories is subject to change depending entirely on
manufacturing companies. For more information about available accessories, refer
to the Samsung website.
6
Basics
Device layout
Gear
Touchscreen
Bezel
Light sensor
Back key
Microphone
Home key (Power key)
Heart rate sensor
Keys
KeyFunction
•
Press and hold to turn the Gear on or off.
•
Press to turn on the screen.
•
Press and hold for more than 7 seconds to restart the Gear.
Home/Power
Back
•
Press to open the Apps screen when you are on the Watch
screen.
•
Press to open the Watch screen when you are on any other
screen.
•
Press to return to the previous screen.
7
Basics
Wireless charger dock
Wireless
charging
surface
LED indicator
•
Do not expose the Gear or the wireless charger dock to water. The devices are not
completely waterproof.
•
Ensure that the strap is kept clean. Contact with contaminants, such as dust and
dye, can cause stains on the strap that may not be fully removed.
Multipurpose
jack
Make sure the Gear’s microphone is not obstructed when you are speaking into it.
8
Basics
Battery
Charging the battery
Charge the battery before using it for the first time or when it has been unused for extended
periods.
Use only Samsung-approved chargers, batteries, and cables. Unapproved chargers or
cables can cause the battery to explode or damage the Gear.
Connect the USB cable to the USB power adaptor. Then, connect the other end of the
1
USB cable to the wireless charger dock.
•
Use the supplied wireless charger dock and charger. The Gear cannot be charged
properly with a third-party charger.
•
Connecting the charger improperly may cause serious damage to the device. Any
damage caused by misuse is not covered by the warranty.
Ensure that the USB cable is properly connected to the wireless charger dock.
Plug the USB power adaptor into an electric socket.
2
9
Basics
Place the Gear into the wireless charger dock.
3
After fully charging your Gear, disconnect it from the wireless charger dock. Unplug the
4
charger from the wireless charger dock, and then unplug the charger from the electric
socket.
To save energy, unplug the charger when not in use. The charger does not have a
power switch, so you must unplug the charger from the electric socket when not in
use to avoid wasting power. The charger should remain close to the electric socket
and be easily accessible while charging.
Checking the charging status
When you connect the Gear and the wireless charger dock, the wireless charger dock’s LED
indicator flashes certain colours to indicate the battery level.
ColourCharging status
→
Red
RedCharging
Green → YellowStandby mode
GreenFully charged
YellowConnected to a low-power adaptor
When a wireless charger dock error occurs, the LED indicator flashes red. Contact a
Samsung Service Centre for service support.
10
Basics
Reducing the battery consumption
Your Gear provides various options that help you conserve battery power.
•
When you are not using the Gear, switch to sleep mode by covering the screen with your
palm.
•
Activate power saving mode.
•
Close unnecessary apps.
•
Deactivate the Bluetooth feature when not in use.
•
Deactivate the Wi-Fi feature when not in use.
•
Decrease the screen brightness.
•
Deactivate the watch always on feature.
•
Deactivate the voice wake-up feature in
S Voice
.
•
Customise the notification settings in
Samsung Gear
on the mobile device.
Battery charging tips and precautions
•
If there are obstructions between the Gear and the wireless charger dock, the Gear may
not charge properly. Prevent the Gear and the wireless charger from coming into contact
with sweat, liquids, or dust.
•
When the battery power is low, the battery icon appears empty.
•
If the battery is completely discharged, the Gear cannot be turned on immediately when
the charger is connected. Allow a depleted battery to charge for a few minutes before
turning on the Gear.
•
If you use multiple apps at once, the battery will drain quickly. To avoid losing power
during a data transfer, always use these apps after fully charging the battery.
•
Using a power source other than the charger, such as a computer, may result in a slower
charging speed due to a lower electric current.
•
If the Gear is being charged with other devices via a multicharger, charging may take
longer.
11
Basics
•
The Gear can be used while it is charging, but it may take longer to fully charge the
battery.
•
If the Gear receives an unstable power supply while charging, the touchscreen may not
function. If this happens, disconnect the Gear from the wireless charger dock.
•
While charging, the Gear may heat up. This is normal and should not affect the Gear’s
lifespan or performance. If the battery gets hotter than usual, the charger may stop
charging.
•
If the Gear is not charging properly, take the Gear to a Samsung Service Centre.
•
Avoid using a bent or damaged USB cable.
Wearing the Gear
Putting on the Gear
Open the buckle and place the strap around your wrist. Fit the strap to your wrist, insert the
pin into an adjustment hole, and then secure the buckle to close it.
Do not bend the strap excessively. Doing so may damage the Gear.
To measure your heart rate more accurately with the Gear, wear the Gear firmly
around your lower arm just above the wrist. Refer to Wearing the Gear correctly for
details.
12
Basics
Strap tips and precautions
•
Be cautious when wearing the Gear. If you have sensitive skin or fasten the Gear too
tightly, you may feel some discomfort.
•
The strap may contain substances that some people are allergic to. Users may experience
discomfort if they wear the Gear for prolonged periods.
•
Skin irritation may occur if you are exposed to soap, sweat, allergens, or pollutants for
long periods.
•
Keep the Gear and the strap clean and dry, and take off the Gear periodically to reduce
skin irritation.
•
The Gear and the strap have passed the hazardous materials test and meet international
safety standards.
Replacing the strap
Detach the strap from the Gear to replace it with a new one.
Push the button where the Gear’s body and strap meet.
1
13
Basics
While pushing the button, pull the strap upwards and remove it.
2
Connect the Gear’s body and the new strap by inserting the end of the strap inside the
3
grooves on the Gear’s body.
Push the strap into the Gear’s body until it clicks into place.
4
14
Basics
Turning the Gear on and off
Press and hold the Power key for a few seconds to turn on the Gear. When you turn on
the Gear for the first time or reset it, a pop-up window will appear. Follow the on-screen
instructions to download and install the Samsung Gear app on your mobile device. Refer to
Connecting the Gear to a mobile device for details.
To turn off the Gear, press and hold the Power key, and then tap
Follow all posted warnings and directions from authorised personnel in areas where
the use of wireless devices is restricted, such as aeroplanes and hospitals.
Power off
.
Connecting the Gear to a mobile device
You should connect your Gear to your mobile device once before using the Gear. To connect
your Gear to a mobile device, install the Samsung Gear app on the mobile device. Launch
Galaxy Apps
Gear
Turn on the Gear.
1
Mobile device
On the Apps screen, tap
2
If necessary, update the Samsung Gear app to the latest version.
or visit apps.samsung.com/gear to download it.
Samsung Gear
.
15
Basics
Tap
3
CONNECT TO GEAR
.
When the
4
on your Gear and mobile device match. Then, tap
Follow the on-screen instructions to complete the connection.
5
When the devices are connected, an on-screen tutorial will appear on the Gear’s screen.
Follow the on-screen instructions to learn the Gear’s basic controls.
Bluetooth pairing request
window appears, confirm the passkeys displayed
OK
.
•
Connection methods and screenshots may vary depending on your device and
software version.
•
You cannot install the Samsung Gear app on the mobile devices that do not
support Gear syncing. Ensure that your mobile device is compatible with a Gear.
•
Supported mobile devices may vary depending on your region, service provider,
and device manufacturer. Visit www.samsung.com for more information.
16
Basics
Connecting the Gear to a new mobile device
When you connect the Gear to another mobile device, the Gear will reset automatically and
all data will be removed from its memory. Make sure you back up any important data stored
in your Gear.
On the Apps screen, tap
1
The Gear will be reset and the current connection with your mobile device will end.
Connect your Gear to another mobile device.
2
Refer to Connecting the Gear to a mobile device for more information.
If the mobile device you want to connect to is already connected to another
Bluetooth device, the Gear cannot establish the connection. Disconnect your
mobile device from the previous device and try to connect to your Gear. For more
information, refer to the mobile device’s user manual.
Settings
→
Gear info
→
Reset Gear
→
Factory reset
.
Remote connection
You can remotely connect the Gear to your mobile device when a Bluetooth connection
is not available. With this connection, you can still receive notifications from your mobile
device. This feature is automatically activated when a Bluetooth connection is made with your
mobile device.
If this feature is not turned on, on your mobile device, open the Apps screen, tap
→
Gear
Settings
→
Connection
, and then tap the
Use Remote connection
Samsung
switch.
17
Basics
Turning the screen on and off
To turn on the screen, rotate the bezel. Or, press the Home key or the Back key.
To turn off the screen, cover it with your palm. Also, the screen will turn off if the Gear is not
used for a specified period.
You can also turn on the screen using a gesture. Refer to General for more information.
Using the bezel
Rotate the bezel to easily control the Gear’s various functions.
Make sure the bezel area is free from the foreign materials.
If the bezel does not rotate, take it to a Samsung Service Centre. Do not disassemble
the Gear.
Scrolling through screens
Rotate the bezel to view other screens. On the Watch screen, rotate the bezel
counterclockwise to view notifications.
18
Basics
Selecting an item
Rotate the bezel to highlight the item you want to select and then tap the item. When you
rotate the bezel, the highlight indicator will move in the same direction.
Adjusting the input value
Rotate the bezel to adjust the volume or brightness. When adjusting the brightness, rotate
the bezel clockwise to make the screen brighter.
06 : 00
09 : 00
19
Basics
Touchscreen
•
Do not allow the touchscreen to come into contact with other electrical devices.
Electrostatic discharges can cause the touchscreen to malfunction.
•
To avoid damaging the touchscreen, do not tap it with anything sharp or apply
excessive pressure to it with your fingertips.
The Gear may not recognise touch inputs close to the edges of the screen, which are
outside of the touch input area.
Tapping
To open an app, to select a menu item, or to press an on-screen button, or to enter a character
using the keyboard on the screen, tap it with your finger.
20
Basics
Tapping and holding
Tap and hold the screen for two or more seconds to access the Edit mode or to view available
options.
Dragging
To move an item, tap and hold it and drag it to the target position.
21
Basics
Swiping
Swipe to the left or right to view other panels.
Navigating the screen
Switching between the Watch and Apps screen
On the Watch screen, press the Home key to open the Apps screen.
When you are not on the Watch screen, press the Home key to return to the Watch screen.
22
Basics
Watch
Widgets
Returning to the previous screen
Press the Back key. You can also swipe down from the top edge of the screen.
Home screen
Introduction
The Home screen can have multiple panels. The Watch screen is the starting point of the
Home screen. Rotate the bezel to view items on the screen, such as notifications and widgets.
Notifications
Available widgets, notifications, and their arrangement may vary depending on the
Quick access
Add widgets.
software version.
23
Basics
Notifications panel
Stay up to date with events, notifications, and messages from your mobile device.
When you receive a notification, it appears at the top of the screen and disappears after a few
seconds and the Gear vibrates.
Your Gear does not have a speaker so the Gear only vibrates when the notification
is arrived and you cannot hear any sound. To configure the vibration settings, refer
Vibration for more information.
Viewing incoming notifications
Tap the notification screen. You can view the notification’s detail.
To clear a notification, swipe upwards from the bottom edge of the screen.
Access additional
options.
If a message includes long text or attachments, check the message details on your
mobile device.
Viewing other notifications
Tap the number at the bottom of the panel. You can view other notifications received
from the same app. To view notifications received from other apps, rotate the bezel
counterclockwise.
24
Loading...
+ 56 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.