Samsung DVD-V6700-XAA User Manual

Instruction Manual

DVD-V6700

www.samsung.com

AFETYINSTRUCTIONS

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with a dry cloth.

7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heaters, or other apparatus (including

amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug has two blades and a third grounding prong.

The wide blade and the third prong are provided for your safety. If the provided plug does not fit into your

outlet, consult an electrician for replacement of the outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with a cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus.

13) When a cart is used, unplug this apparatus and use caution when moving the

cart/apparatus combination to avoid injury from tip-over.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been

damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus. Service is also required if the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

ENG-2

AFETYINSTRUCTIONS

Precautions

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury.

Do not install this equipment in a confined space such as a bookcase or similar unit.

This symbol indicates important instructions accompanying the product.

WARNING : To prevent damage which may result in fire or electric shock hazard, do not expose

this appliance to rain or moisture.

FCC NOTE (for U.S.A):

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures.

• Reposition or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help. This class B digital apparatus meets all requirements of the Canadian Interference -Causing Equipment Regulations.

CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LÁSER CLASE 1

ENG-3

AFETYINSTRUCTIONS

CAUTION

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

Note:

• This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used

elsewhere.

• This DVD player is designed and manufactured to respond to the Region Management Information. If the Region number of a DVD disc does not correspond to the Region number of this DVD player, the DVD player cannot play the disc.

•

Handling Cautions

• Before connecting other components to this player, be sure to turn them all off.

• Do not move the player while a disc is being played, or the disc may be scratched or broken, and the player’s internal parts may be damaged.

• Do not put a flower vase filled with water or any small metal objects on the player.

• Be careful not to put your hand into the disc tray.

• Do not place anything other than the disc in the disc tray.

• Exterior interference such as lightning and static electricity can affect normal operation of this player. If this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the AC power cord to the AC power outlet. The player will operate normally.

• Be sure to remove the disc and turn off the player after use.

• Disconnect the AC power cord from the AC outlet when you don’t intend to use the player for long periods of time.

• Clean the disc by wiping in a straight line from the inside to the outside of the disc.

Disc Storage

Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.

• Do not keep under direct sunlight.

• Keep in a cool ventilated area.

• Store vertically.

• Keep in a clean protection jacket.

Maintenance of Cabinet

For safety reasons, be sure to disconnect the AC power cord from the AC outlet.

• Do not use benzene, thinner, or other solvents for cleaning.

• Wipe the cabinet with a soft cloth.

ENG-4

EFORE YOU START

Before you start

Accessories

Remote Control

AK59-00051B

Batteries-2EA

1.5V(AAA)

AC43-12002H

Install Batteries in the Remote Control

Open the battery cover on

the back of the remote control.

Insert two AAA batteries.

Make sure that the polarities (+ and -) are aligned correctly.

Replace the battery

cover.

Video/Audio Cable

AC39-00073A

User’s Guide

AK68-01304B

If the remote control doesn’t operate properly:

■

Check the polarity +, - of the batteries

■

Check if the batteries are drained.

■

Check if the remote control sensor is blocked by obstacles.

■

Check if there is any fluorescent lighting nearby.

ENG-5

ABLE OFCONTENTS

Table of Contents

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Install Batteries in the Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Chapter 1: Setup

General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Disc Type and Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Tour of the Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Chapter 2: Connections

Before Connecting the DVD-VCR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Connecting a STB to the DVD-VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Connection to a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Connecting to a TV (Progressive) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Connecting to a TV (Interlace) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Connecting to a TV (S-Video) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Connecting to a TV (Video) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Connection to an Audio System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Connecting to an Audio System (2 Channel Amplifier, Analog) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Connecting to an Audio System (Dolby digital, MPEG2 or DTS Amplifier) . . . . . . . . . . . . . . . . . . . . . . 19

Connecting the Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Chapter 3: Initial Setup

Selecting a Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Setting the Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Setting the Clock Manually. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Setting the Front Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Setting the Auto Power Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Chapter 4: DVD Operations

Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Using the Search and Skip Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Using the Display Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Using the Disc and Title Menu (DVD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Using the Function Menu (DVD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Slow Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Adjusting the Aspect Ratio (EZ View) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Selecting the Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Selecting the Subtitle Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

ENG-6

ABLE OFCONTENTS

Changing the Camera Angle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Using the Bookmark Function (DVD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Using the Zoom Function (DVD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Clips Menu for MP3/WMA/JPEG/MPEG4 Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Folder Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

MP3/WMA Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

MPEG4 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Program Play & Random Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Picture CD Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Using the Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Setting Up the Language Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Setting Up the Audio Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Setting Up the Display Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Setting Up the Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Chapter 5: VCR Operations

Inserting and Ejecting a Video Cassette Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Playing a Pre-Recorded Video Cassette Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Special VCR Playback Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Using Automatic Tracking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Selecting the Cassette Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Setting the Auto Play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Setting the Auto Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Using the Tape Counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Using the Assemble Edit Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Selecting the Audio Output Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Searching for a Specific Sequence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Basic Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Special Recording Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Using One-Touch Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Selecting the Recording Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Making a Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Chapter 6: Reference

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

ENG-7

Chapter 1

ETUP

General Features

DVD-VCR Features

■

Perfect compatibility to play back DVDs, audio

CDs or VHS Tapes.

■

Composite, S-Video, and Component Video

outputs.

■

On-Screen Program (English/French/Spanish).

DVD Features

■

10-bit video digital to analog converter and

54MHz advanced digital filter.

■

Playback of 96KHz/24-bit sources.

■

DTS digital output for DTS-enhanced DVDs.

■

This unit can play MPEG4 formats within an avi

file.

■

Playback MP3-CDs.

VCR Features

■

Hi-Fi Stereo VCR.

■

Superior slow motion and stop action (with 4

heads).

■

Playback of S-VHS tapes with a better than

standard resolution.

■

INTRO Scan, Zero Return, and END Search.

■

Time remaining counter, real time counter.

Note

■

Discs which cannot be played with this player.

- DVD-ROM/DVD-RAM/VCD

- CDI/CDV

- Super Audio CD (CD, HD layer)

- CDGs play audio only, not graphics.

- DVD-RW (VR mode)

- Non-finalized DVD-RW, -R, DVD+RW, and +R discs.

■

Ability to play back may depend on recording

conditions.

- DVD-RW, -R/CD-RW/DVD+RW, +R/CD-ROM

Tunerless DVD Player & VCR

■

This DVD-VCR unit does not have a TV tuner.

Recording TV broadcasts is possible via Connection to Cable/Satellite boxes and Multi Channel Video Services.

Note

This product incorporates copyright protection

technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

COPY PROTECTION

Many DVD discs are encoded with copy protection.

Because of this, you should only connect your DVDVCR directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copyprotected DVD discs. This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

PROGRESSIVE SCAN OUTPUT

SETTING

PLEASE NOTE THAT NOT ALL

HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IF PROGRESSIVE SCAN PICTURE PROBLEMS OCCUR, WE RECOMMEND SWITCHING THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING YOUR TV SET COMPATIBILITY WITH THIS DVD-VCR, PLEASE CONTACT SAMSUNG'S CUSTOMER SERVICE CENTER.

ENG-8

ETUP

Disc Type and Characteristics

This DVD-VCR is capable of playing the following types of discs with the corresponding logos:

Disc Types (Logos)

DVD

AUDIO-CD

Recording Types Disc Size Max. Playing Time Characteristics

- DVD contains excellent sound and video due to Dolby Digital and MPEG-2 system.

- Various screen and audio functions can be easily selected through the on-screen menu.

- CD is recorded as a Digital Signal with better audio quality, less distortion and less

Audio

Video

Audio

5”

3 1/2”

5”

Single-sided 240 min.

Double-sided 480 min.

Single-sided 80 min.

Double-sided 160 min.

74 min.

deterioration of audio quality

3 1/2”

■

CD-R,CD-RW and DVD-RW, -R, DVD+RW, +R discs may not be playable in all cases due to the disc

20 min.

over time.

type or condition of the recording.

■

Do not run the player with two discs loaded at the same time.

Disc Markings Region Number

NTSC

STEREO

Play Region Number

NTSC broadcast system in U.S.A, Canada, Korea, Japan, etc.

Dolby Digital disc

Stereo disc

Both the DVD-VCR and the discs are

coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play.

The Region Number for this player is described on the rear panel of the player.

DIGITAL

SOUND

Digital Audio disc

DTS disc

MP3 disc

DivX Certification

You must only insert one DVD disc at a time. Inserting two

or more discs will not allow playback and may cause damage to the DVD-VCR.

DivX, DivX Certified, and

associated logos are trademarks of DivXNetworks, Inc and are used under license.

ENG-9

Description

Front Panel Controls

ETUP

1 DISC TRAY

Place the disc here.

2 VCR Deck

Insert a standard VHS video tape.

3 EJECT

Press to eject a video tape if the tape is stopped.

4 (POWER)

Press to turn the DVD-VCR on and off.

5 LINE IN 2

Connects to the Video/Audio output jack of your

external device.

6 P.SCAN

Selects the progressive scan mode.

7 OPEN/CLOSE

Press to open and close the disc tray.

8 Front Panel Display

Operation indicators are displayed here

10 11 12

9 LINE IN SELECT and

Press to select LINE IN 1 or LINE IN 2.

10 DVD/VCR

Press to view DVD or VCR mode.

11 EZ VIEW

Press this button to easily adjust the aspect ratio

of a picture to your TV's screen size.

12 REC (VCR)

Press to begin recording.

13 (Reverse/Rewind)

Press to reverse/rewind a disc/video tape.

14 (STOP)

Press to stop a disc/video tape during playback or

record (VCR).

15 (Play/Pause)

Press to play or pause the disc/video tape.

16 (Forward/Fast Forward)

Press to forward/fast forward a disc/videotape.

Front Panel Display

❶ ❷ ❸

❹ ➎

1 DVD is activated. 2 The time, counter position, time remaining or

current deck status is indicated.

3 VCR is activated. 4 DVD or CD media is loaded. 5 Video tape is loaded.

ENG-10

Rear Panel

ETUP

❶

❷ ❸ ❹

➎

1 AUDIO OUT

Connects to the Audio input jacks of your

television. You can use this connection as audio

output jacks when Component or S-Video is

connected.

2 COMPONENT VIDEO OUT

- Use these jacks if you have a TV with

Component Video in jacks. The Component connection provides the best picture from the DVD player. These jacks provide PR, PBand Y video.

- If Component (Progressive Scan) Video Output is selected in the Alt Video Out menu (see page 54~55) or by using the P.SCAN button on the front panel, progressive scan mode will be enabled.

- If Component (Interlace Scan) Video Output is selected in the Alt Video Out menu or by using the P.SCAN button on the front panel, interlaced scan mode will be enabled.

DVD/VCR Output Chart

Type of Connection

S-VIDEO OUT

COMPONENT VIDEO OUT

AUDIO OUT (L,R)

DIGITALAUDIO OUT (COAXIAL)

LINE OUT (A/V)

DVD Output Jacks

❻

3 LINE IN 1 (VIDEO/AUDIO)

Connects to the Video/Audio output jack of your

external device.

4 LINE OUT (VIDEO/AUDIO)

Use the Video/Audio cable to connect to the

Video/Audio input jacks on your television. You must have these jacks connected to see video playback from the VCR on your TV.

You can use this connection as an audio output

terminal when Component or S-Video is connected.

5 S-VIDEO OUT

Use the S-Video cable to connect this jack to the

S-Video input jack on your television for higher picture quality.

6 DIGITAL AUDIO OUT (COAXIAL)

- Use a Coaxial digital cable to connect to a

compatible Dolby Digital receiver.

- Use a Coaxial digital cable to connect to an A/V Amplifier that contains a Dolby Digital, MPEG2 or DTS decoder.

VCR Output Jacks

▼

O : Active.

X : Inactive.

Notes

■

Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive Scan is

supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.

■

See pages 55 ~ 56 to get more information on how to use the Alt Video Out menu.

ENG-11

ETUP

Tour of the Remote Control

1 POWER button

Press to turn the DVD-VCR

on and off.

2 NUMBER Buttons

3 AUDIO button

Use this button to access

various audio functions on a disc. (DVD)

4 Skip button

Press to skip a disc

backwards. Use to skip a title, chapter or track on a disc.

5 REC button

Press to begin recording.

(VCR)

6 Search button

Press to reverse search a

disc.

7 (STOP) button

Press to stop a disc/video

tape during play or record (VCR).

8 MENU button

Brings up the DVD-VCR

player’s menu.

9 ENTER/



Function as toggle switch

and adjust tape tracking.

10 DISC MENU button

Brings up the Disc menu.

(DVD)

11 SUBTITLE button

Press to display the subtitle

language name abbreviation on screen.

12 OPEN/CLOSE button

Use to open and close the

disc tray or eject a video tape.

13 MODE button

Use to select the program

or random play.

REPEAT button

Allows you to repeat play a

title, chapter, track, or disc. (DVD)

¦¦

buttons

/ TRACK

ŒŒ

´´

ˇˇ

¨¨ ˆˆ

ØØ ∏∏

””

’’

˝˝ ÔÔ

 ÒÒ

14 VCR button

Use to operate the VCR.

15 DVD button

Use to operate the DVD.

16 F.ADV/SKIP/INPUT SEL.

ÚÚ

ÆÆ

ıı

˜˜ ¯¯

˘˘ ¿¿

¸¸

˛˛ ◊◊ ±±

≠≠

button

Press to advance play one

frame at a time (DVD and VCR). Press to fast forward a video tape (VCR). Press to select an external signal source.

17 Skip button

Press to forward skip a disc

forward. Use to skip a title, chapter or track on a disc.

18 PROGRESSIVE/SPEED

button

Press to select progressive

scan mode (DVD). Press to select the tape recording speed (VCR).

19 Search button

Press to search a disc

forward.

20 (Play/Pause) button

Press to play or pause the

disc/video tape.

21 RETURN button

Returns to a previous menu.

22 CLEAR button

Use to remove menus or

status displays from the screen.

23 INFO. button

Displays the current disc

mode. (DVD)

24 MARK/SEARCH button

Press to memorize scenes

for replay. (DVD) Displays the VCR Function

menu. (VCR)

25 ANGLE/TIMER button

Use to access various

camera angles on a disc (DVD). Displays the Timer

Program menu (VCR).

ENG-12

Chapter 2

ONNECTIONS

Before Connecting the DVD-VCR

- Always turn off the DVD-VCR, TV, and other components before you connect or disconnect any cables.

- Refer to the user’s manual of the additional components (such as a TV) you are connecting for more information on those particular components.

Connecting a STB to the DVD-VCR

The following instructions show how to connect a Set-Top Box,TV and Amplifier to the DVD-VCR

Use a TV antenna cable to connect the signal

source coming from the antenna or wall to the

ANT IN jack on the STB.

Use the Video/Audio Cable to connect the LINE

OUT jacks on the STB to the AUDIO/VIDEO LINE IN 1 jacks on the DVD-VCR.

Select LINE 1 by pressing LINE IN SELECT

button on the front panel in VCR

mode .

Use the Video/Audio Cable to connect the LINE

AUDIO OUT(R/L)/VIDEO OUT jacks on the DVD-

VCR to the Audio & Video jacks on the TV.

Tunerless DVD Player & VCR

This DVD-VCR unit does not have a TV tuner. Recording TV broadcasts is possible via Connection to Cable/Satellite (Set-top) boxes and Multi Channel Video Services.

Notes

- If you want to use other connections to a TV, please refer to the Connection to a TV page. (See pages 14

to 17)

- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19)

- When you connect a STB through the LINE IN 1 jack of the DVD-VCR, you still can see the picture from the STB on your TV set if the DVD-VCR is turned off.

ENG-13

ONNECTIONS

Connection to a TV

The following shows examples of connections commonly used to connect the DVD-VCR with a TV and other

components.

Connecting to a TV (Progressive)

Using component video cables (not included),

connect the COMPONENT VIDEO OUT jack on the rear of the DVD-VCR to the COMPONENT IN

jack of your TV.

Using the audio cables, connect from the AUDIO

OUT or LINE OUT AUDIO (red and white) jacks

on the rear of the DVD-VCR to the AUDIO (red

and white) IN

Turn on the DVD-VCR and TV.

jacks of your TV.

With the unit in Stop mode, set the Alt video

output to Component: Progressive in the Display Setup menu (see pages

PROGRESSIVE button on the remote control.

55 ~ 56

) or press the

Red

White

Audio Cable

White

Red

Green

Blue

Red

Component Cable (not included)

Green

The Progressive Scan mode prompt screen appears. Then press ENTER and progressive video will be output.

Press the input selector on your TV remote

control until the Component signal from the DVD-VCR appears on your TV screen.

To see the progressive video output,

- Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.

- The position of the jacks may vary depending on the TV set.

Note

What is "Progressive Scan"?

Progressive scan has twice as many scanning lines as the interlace output method.

The Progressive scanning method provides clearer picture quality. The Component Video jacks only output video from the DVD player. To view video from the VCR, you must have

the Video Out (yellow) jack connected.

ENG-14

ONNECTIONS

Connecting to a TV (Interlace)

- Connecting to your TV using Component video cables.

- You will enjoy high quality and accurate color reproduction images. Component video separates the picture element into black and white(Y), blue(PB), and red(PR) signals to present clear and clean images. (Audio signals are delivered through the audio out (red and white) or line out(red and white) jacks).

Using component video cables (not included),

connect the the back of the DVD-VCR to the

jack of your TV.

COMPONENT VIDEO OUT jack on

COMPONENT

Using the audio cables, connect from the AUDIO

OUT or LINE OUT AUDIO (red and white) jacks

on the back of the DVD-VCR to the AUDIO (red

and white) IN jacks of your TV.

Turn on the DVD-VCR and TV.

White

Red

Green

Red

Blue

Audio Cable

Component Cable (not included)

With the unit in Stop mode, set the Alt video

output to Setup menu (see pages

Component: Interlace in the Display

55 ~ 56)

or press the

Red

White

Red

Blue

Green

PROGRESSIVE button on the remote control

until Interlace is output.

Press the input selector on your TV remote

control until the Component signal from the DVDVCR appears on the TV screen.

Notes

- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 ~ 19)

- Depending on the manufacturer. The number and position of jacks may vary depending on the TV set. Please refer to the user's manual of your TV.

- The Component Video Out jacks only output video from the DVD player. To view video from the VCR, you must have the Video Out (Yellow) jack connected.

- You can hear sound from the connection. VCR audio only outputs through the Line Out Audio jacks (red and white).

LINE OUT AUDIO or AUDIO OUT (red and white) jacks with a Component

ENG-15

ONNECTIONS

Connecting to a TV (S-Video)

- Connecting to your TV using an S-Video cable.

- You will enjoy high quality images. S-Video separates the picture element into black and white(Y) and color(C) signals to present clearer images than regular video input mode. (Audio signals are delivered through audio out(red and white) or line out(red and white) jacks).

Using an S-Video cable (not included), connect

the S-VIDEO OUT jack on the rear of the DVD- VCR to the S-VIDEO IN jack of your TV.

Using the audio cables, connect from the AUDIO

OUT or LINE OUT AUDIO (red and white) jacks

on the rear of the DVD-VCR to the AUDIO (red

and white) IN jacks of your TV.

Turn on the DVD-VCR and TV.

White

Red

S-Video Cable

With the unit in Stop mode, set the Alt video

output to S-Video in the Display Setup menu (see pages

55 ~ 56)

button on the remote control until S-Video is

output.

or press the PROGRESSIVE

(not included)

Red White

Audio Cable

Press the input selector on your TV remote

control until the S-Video signal from the DVDVCR appears on your TV screen.

Notes

- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 ~ 19)

- The number and position of the jacks may vary depending on the TV set. Please refer to the user's manual of your TV.

- The S-Video jack only outputs video from the DVD player. To view video from the VCR, you must have the Video Out (Yellow) jack connected.

- You can hear sound from the LINE OUT AUDIO (red and white) or AUDIO OUT (red and white) jacks for SVideo connection. VCR audio only outputs through the Line Out Audio jacks (red and white).

- Please do not connect S-Video and Component Video (Y, Pb, Pr) outputs simultaneously, as they may interfere and degrade both video output quality.

ENG-16

ONNECTIONS

Connecting to a TV (Video)

Using video/audio cables, connect the VIDEO

(yellow)/AUDIO (red and white) OUT

the rear of the DVD-VCR to the

(yellow)/AUDIO (red and white)

TV.

jacks on

VIDEO

IN jacks of your

White

Red

Yellow

Turn on the DVD-VCR and TV.

Red

Audio Cable

White

Yellow

Video Cable

Press the input selector on your TV remote

control until the Video signal from the DVD-VCR appears on the TV screen.

Notes

- Noise may be generated if the audio cable is placed too close to the power cable.

- If you want to connect to an Amplifier, please refer to the Amplifier connection page.

(See pages 18 ~ 19).

- The number and position of the jacks may vary depending on your TV set. Please refer to the user's manual of your TV.

- If there is one audio input jack on the TV, connect it to the LINE OUT AUDIO OUT Left (white) jack of the DVDVCR.

- If you press the (see page 54 to 55) mode changes in the following sequence: (S-Video - Interlace - Progressive)

- When you connect an external device (STB or VCR) and play it through the LINE IN 1 jack of the DVD-VCR, you can still see the display on your TV set although the DVD-VCR set has been turned off.

P.SCAN button when the DVD-VCR is in Stop mode or no disc is inserted, the Alt Video Out

ENG-17

ONNECTIONS

Connection to an Audio System

Connecting to an Audio System (2 Channel Amplifier, Analog)

Using the audio cables, connect the (LINE)

AUDIO (red and white) OUT jacks on the back

of the DVD-VCR to the AUDIO (red and white)

jacks of the Amplifier.

Using video signal cable(s), connect the VIDEO,

S-VIDEO or COMPONENT OUT jacks on the

back of the DVD-VCR to the VIDEO, S-VIDEO or

COMPONENT IN jack of your TV as described on

pages 13 to 16.

Red

White

Audio Cable

Turn on the DVD-VCR, TV, and Amplifier.

Press the input select button of the Amplifier to

select the External input in order to hear sound from the DVD-VCR.

Refer to your Amplifier's user manual to set the Amplifier's audio input.

Notes

- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears.

- Please set the audio in the menu screen according to the Amplifier. (See pages 53 ~ 54)

- The position of the jacks may vary depending on the Amplifier. Please refer to your Amplifier's user manual .

- You can also connect the amplifier using AUDIO OUT (red and white) jacks from the DVD-VCR.

2-channel Stereo Amp.

Red

White

ENG-18

ONNECTIONS

Connecting to an Audio System (Dolby digital, MPEG2 or DTS

Amplifier)

Using a coaxial cable (not included), connect the

DIGITAL AUDIO OUT (COAXIAL) jack on the

back of the DVD-VCR to the DIGITAL AUDIO IN

(COAXIAL) jack of the Amplifier.

Using video signal cable(s), connect the S-VIDEO or COMPONENT OUT jacks on the back of the

DVD-VCR to the S-VIDEO or COMPONENT IN

jack of your TV as described on pages 13 to 16.

Coaxial Cable

(not included)

Turn on the DVD-VCR, TV, and Amplifier.

Press the input select button of the Amplifier to

select external input in order to hear sound from the DVD-VCR.

Refer to your Amplifier's user manual to set the Amplifier's audio input.

Notes

- When you connect the DVD-VCR to a DTS Amplifier and play a DTS disc, set the DTS to On in the Audio Setup menu.

- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears.

- Please set the audio in the menu screen according to the Amplifier. (See pages 53 ~ 54)

- The position of jacks may vary depending on the Amplifier. Please refer to the user's manual of the Amplifier.

Dolby digital or

DTS Amp.

ENG-19

ONNECTIONS

Connecting the Power Cord

Your DVD-VCR's power cord should be plugged

into a standard 120V/60Hz wall outlet.

Turn on the power by pressing the POWER button on the remote control or on the front

panel.

Turn on your TV by pressing the POWER button

on the TV remote control.

Press the input selector on your TV remote until

the signal from the DVD-VCR appears.

ENG-20

Chapter 3

NITIALSETUP

Selecting a Menu Language

Follow these steps to change the on-screen MENU language to English, French or Spanish.

Press the MENU button.

Press the  buttons to

select Setup, then press the 

or ENTER button.

Press the  buttons to

select Language, then press the  or ENTER button.

Press the  buttons to

select the appropriate language : English, Français or Español.

Press the ENTER button.

Press the MENU button to exit.

ENG-21

Manual Clock

2007 MON

Time Date Year

1 / 01

12 : 00 am

NITIALSETUP

Setting the Clock

This menu is used to set the current time. You need to set the time to use timer recording.

Setting the Clock Manually

If Auto Setup fails to set the DVD-VCR’s internal clock by locating a local TV station, follow these steps to set

the date and time manually.

Note: For accurate Timer Recording, your DVD-VCR's internal clock must be set correctly.

Press the MENU button.

Press the  buttons to

select Setup, then press the 

or ENTER button.

Press the  buttons to

select Clock, then press the 

or ENTER button.

Use the ¦ buttons to select

each of the following options, then use the  buttons to set each option. Press the ENTER button to set the clock.

Press the MENU button to exit.

ENG-22

NITIALSETUP

Setting the Front Panel Display

You can set the Front Panel Display to be bright, dim, or to automatically dim during power off.

Press the MENU button.

Press the  buttons to

select Setup, then press the 

or ENTER button.

Press the  buttons to

select Front Display, then press the  or ENTER button to select Auto, Bright or Dim.

Press the MENU button to exit.

■

Auto: Front Panel Display will dim automatically

during power off.

■

Bright: Front Panel Display will be bright.

■

Dim: Front Panel Display will be dim.

ENG-23

NITIALSETUP

Setting the Auto Power Off

This feature automatically turns off your DVD-VCR if no signal is received and you do not press any buttons for

the selected time.

Press the MENU button.

Press the  buttons to

select Setup, then press the 

or ENTER button.

Press the  buttons to

select Auto Power Off, then press the  or ENTER button to select Off, 1Hr or 2Hr.

Press the MENU button to exit.

■

Off: Auto power off is disabled.

■

1Hr: DVD-VCR will auto shut off 1 hour after the last button

is pressed or no signal is received.

■

2Hr: DVD-VCR will auto shut off 2 hours after the last button

is pressed or no signal is received.

ENG-24

Chapter 4

DVD O

PERATIONS

Playing a Disc

Before Play

- Turn on your TV and set it to the correct Video Input on your TV's remote control.

- If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.

Playback

Press the OPEN/CLOSE ( )

button on the front panel.

Place a disc gently into the tray

with the disc’s label facing up.

Press the (Play/Pause)

button on your remote control or on the front panel.

Most discs will start to play back as soon as the tray closes.

Stopping Play

Press the (Stop) button

during play.

ENG-25

▼

Stop/Resume

- Press the (Stop) button once to

stop playback. To resume the DVD/CD from the point where the disc was stopped, press (Play/Pause) button.

- Press the (Stop) button twice to completely stop playback. The next time you press the (Play/Pause) button, the disc will start over from the beginning.

the

DVD O

PERATIONS

Pausing Play

Press the (Play/Pause)

button on your remote control or on the front panel during play.

Step Motion Play (Except CD)

Press the F.ADV button on the

remote control during play.

Slow Motion Play (Except CD)

Press the (Forward) button to

choose the play speed between 1/8, 1/4 and 1/2 of the normal speed during PAUSE or STEP mode.

▼

- Screen stops, no sound.

- To resume, press the (Play/Pause) button once again.

Note

If the player is left for about 5 minutes in

pause mode, it will stop.

▼

- Each time the button is pressed, a

new frame will appear.

- No sound is heard during STEP mode.

- Press the (Play/Pause) button to resume normal play.

- You can only perform step motion play in the forward direction.

▼

- No sound is heard during slow mode.

- Press the (Play/Pause) button to resume normal play.

- Reverse slow motion play will not work.

Note

This ( ) icon indicates an invalid button

has been pressed.

Removing the Disc

Press the OPEN/CLOSE ( )

button on the front panel.

ENG-26

+ 58 hidden pages