Samsung DVD-V6500V User Manual
00114A DVD-V6500/XSA-GB1 11/21/02 1:51 PM Page 1
Instruction Manual
DVD-VCR
DVD-V6500
www.samsung.com.au
00114A DVD-V6500/XSA-GB1 11/21/02 1:51 PM Page 2
GB
Contents
◆ FOREWORD
■ Disc Type and Characteristics....................................................................... 6
◆ DVD-VCR O
■ Front View of the DVD-VCR.......................................................................... 7
■ Rear View of the DVD-VCR........................................................................... 7
■ Infrared Remote Control................................................................................ 8
■ Display Indicators.......................................................................................... 9
■ Accessories................................................................................................... 9
◆ C
ONNECTING YOUR DVD-VCR
■ Deciding How to Connect DVD-VCR............................................................. 10
■ Connecting DVD-VCR to the TV using the Coaxial Cable............................ 11
■ Connecting DVD-VCR to the TV using the RCA Cable................................. 11
■ Connecting Other Equipment to Your DVD-VCR.......................................... 12
■ Plug & Auto Set Up........................................................................................ 13
■ Tuning Your Television for the DVD-VCR..................................................... 14
■ Deck Control Keys......................................................................................... 15
■ Copying from DVD to VCR............................................................................ 16
■ Inserting Batteries in the Remote Control...................................................... 17
■ Setting the Date and Time............................................................................. 17
■ Menu Language............................................................................................. 18
◆ S
ETTING UP YOUR DVD-VCR
■ Presetting the Stations Automatically............................................................ 19
■ Presetting the Stations Manually................................................................... 20
■ Clearing a Preset Station............................................................................... 21
■ Changing the Preset Station Table................................................................ 22
■ Setting the DVD-VCR Output Channel.......................................................... 23
■ Selecting the RF OUT(Newzealand Model only)........................................... 23
■ Selecting the Colour Mode............................................................................ 24
■ NICAM(Newzealand Model only).................................................................. 24
■ Intelligent Picture Control.............................................................................. 25
■ Auto Power off............................................................................................... 26
■ Selecting the Cassette Type.......................................................................... 27
■ Auto Repeat Play........................................................................................... 27
■ Displaying/Hiding On-Screen Information..................................................... 28
◆ R
ECORDING TELEVISION BROADCASTS
■ Selecting the Recording Speed..................................................................... 28
■ Protecting a Recorded Cassette.................................................................... 29
■ Recording a Programme Immediately........................................................... 29
■ Recording a Programme with Automatic Stop............................................... 30
■ Using the Timer Programming Feature......................................................... 31
■ Checking a Preset Recording........................................................................ 32
■ Cancelling a Preset Recording...................................................................... 32
VERVIEWS
Contents (cont.)
◆ PLAYING BACK
■ Playing a Cassette......................................................................................... 33
■ Adjusting Picture Alignment Automatically.................................................... 33
■ Adjusting Picture Alignment Manually........................................................... 33
■ Selecting the Audio Output Mode.................................................................. 34
■ Playing a Cassette in Slow Motion................................................................ 34
■ Playing a Sequence Frame by Frame........................................................... 35
■ Playing a Sequence at Variable Speeds....................................................... 35
■ Picture Search, Fast Forward/Rewind........................................................... 36
■ Searching for a Specific Sequence............................................................... 36
■ Using the Tape Counter................................................................................ 37
■ Connecting an RCA Audio/Video Input Cable............................................... 38
■ Using the Assemble Edit Function................................................................. 39
■ Recording from Another VCR or Camcorder................................................. 39
■ Audio Dubbing a Pre-recorded Cassette....................................................... 40
■ SQPB (Super VHS Quasi PlayBack)............................................................ 41
◆ DVD F
UNCTIONS
■ Choosing a Connection................................................................................. 42
■ Playing a Disc................................................................................................ 43
■ Using the Search & Skip Functions............................................................... 44
■ Using the DVD Setup.................................................................................... 45
■ Using the Disc Menu Language.................................................................... 46
■ Setting Up the Audio Language Features..................................................... 47
■ Using the Subtitle Language......................................................................... 47
■ Setting Up the Parental Control..................................................................... 48
■ Setting Up the Audio Options........................................................................ 49
■ Setting Up the Display Options...................................................................... 50
■ A/V Receiver Connections............................................................................. 51
■ Special Playback Features............................................................................ 52
■ Using the Display Function (DVD/VCD/CD).................................................. 53
■ Repeat Play................................................................................................... 54
■ Program Play (DVD/VCD/CD)....................................................................... 55
■ Random Play (DVD/VCD/CD)....................................................................... 55
■ SCREEN FIT Play......................................................................................... 56
■ Digest Play.................................................................................................... 57
■ Using the Disc View Function (Track View VCD).......................................... 58
■ Using the Disc View Function (Index View VCD).......................................... 58
■ Selecting the Audio Language (Using the Audio button)............................... 59
■ Selecting the Subtitle Language (Using the Subtitle button)......................... 59
■ Changing the Camera Angle......................................................................... 60
■ Using the Bookmark Function (DVD/VCD).................................................... 61
■ Recalling a Marked Scene............................................................................. 61
■ Clearing a Mark............................................................................................. 61
■ Using the Zoom (DVD/VCD).......................................................................... 62
■ 3D Sound Function........................................................................................ 62
■ MP3 Play....................................................................................................... 63
■ MP3 Play (CD-R MP3 disc requirements)..................................................... 64
GB
2
3
00114A DVD-V6500/XSA-GB1 11/21/02 1:51 PM Page 4
GB
Contents (cont.)
◆ SOLVING PROBLEMS
■ Technical Specifications .............................................................................. 65
■ Problems and Solutions (VCR)...................................................................... 66
■ Troubleshooting Guide (DVD)....................................................................... 67
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned
by Macrovision Corpration and other rights owners. Use of this copyright protection
technology must by authorized by Macrovision Corporized by Macrovision
Corporation, and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Symbols
Safety Instructions
The following illustrations represent precautions.
The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.
DO NOT OPEN THE DVD-VCR. Refer to service personnel.
Do NOT expose the DVD-VCR
to extreme temperature conditions (below 5°C and above
40°C) or to extreme humidity
conditions (less than 10% and
more than 75%).
Do NOT expose the DVD-VCR
to direct sunlight.
Do NOT expose the DVD-VCR
to any liquids.
GB
1 1
= Step number
1
4
☛
➢
NoteImportantHold downPress/push
Do NOT place any objects on
the DVD-VCR or remote
control.
During a storm and/or lightning, unplug the DVD-VCR
from the mains socket and
aerial.
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL
ENVIRONMENTS
If the remote control is not
used for a long period of time,
remove the batteries and store
it in a cool, dry place.
5
00114A DVD-V6500/XSA-GB1 11/21/02 1:51 PM Page 6
GB
Disc Type and Characteristics
This DVD player is capable of playing the following types of discs with the corresponding logos :
Disc Types
(Logos)
DVD
VIDEO-CD
AUDIO-CD
* DO NOT play CD-ROM, CD-I and DVD-ROM in this player!
(CDGs play audio only, not graphics.)
Recording
Types
Audio
+
Video
Audio
+
Video
Audio
Disc Size
12 Cm
8 Cm
12 Cm
8 Cm
12 Cm
8 Cm
Max.
Playing
Time
Single-sided
240 min.
Double-sided
480 min.
Single-sided
80 min.
Double-sided
160 min.
74 min.
20 min.
74 min.
20 min.
Characteristics
• DVD contains excellent s o u n d
and video due to Dolby Digital
and MPEG-2 system.
• Various screen and audio
functions can be easily selected
through the on-screen menu.
• Video with CD sound, VHS
quality & MPEG-1 compression
technology.
• An LP is recorded as an analog
signal with more distortion. CD
is recorded as a Digital Signal
with better audio quality, less
distortion and less deterioration
of audio quality over time.
Front View of the DVD-VCR
REW /
SKIP BACK
BUTTON
DVD DECK
PLAY/PAUSE
BUTTON
OPEN/CLOSE
BUTTON
F.F /
SKIP NEXT
BUTTON
STANDBY/ON
BUTTON
STOP
BUTTON
Rear View of the DVD-VCR
VIDEO CASSETTE
COMPARTMENT
DVD/VCR SELECT
BUTTON
PROGRAMME
SELECTION
BUTTONS
COPY
BUTTON
RECORD
BUTTON
INPUT SELECT
BUTTON
EJECT
BUTTON
GB
Disc Markings
~
• Playback
Region
Number
PAL
• PAL colour
system in U.K,
France, Germany,
Austrailia, etc.
N T S C
• NTSC broadcast
system in USA,
Canada, japan,
South Korea, etc.
• Dolby
Digital disc
STEREO
• Stereo
disc
Playback Region Number
Both the DVD player and the discs are coded by region. These regional codes must match in order for the
disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
6
DIGITAL
SOUND
• Digital
Audio disc
• DTS disc
1 2 3 4 5 6 7 8 9
1 RF ANTENNA INPUT
2 RF OUT TO TV
3 LINE OUT TO TV (COMPOSITE)
4 LINE IN 1
5 AUDIO LINE OUT
(S-VIDEO OR COMPONENT)
6 COMPONENT VIDEO OUT
7 DIGITAL AUDIO OUT(COAXIAL)
8 DIGITAL AUDIO OUT(OPTICAL)
9 S-VIDEO OUT
7
00114A DVD-V6500/XSA-GB1 11/21/02 1:51 PM Page 8
GB
Infrared Remote Control
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
1 STANDBY/ON
2 AUDIO
3 SHUTTLE <</>>
4 MODE
REPEAT
5 ZOOM, SVHS
6 3D SOUND
7 DVD, VCR
8 DIGEST
F.ADV/STEP
9 TRACKING ( / )
10 REWIND, SKIP BACK
11 STOP
12 RECORD
13 UP
14 LEFT
15 SETUP/ENTER
16 RETURN, A.DUB
17 TITLE, SPEED
18 OPEN/CLOSE
19 Feature unavailable on this model
20 0-9
21 CLOCK/COUNTER
22 ANGLE, A.TRK
23 CLEAR
24 SCREEN FIT
25 INPUT SEL.
26 DISPLAY
27 PROG
28 FAST-FORWARD
SKIP NEXT
29 DISC MENU
30 PLAY/STILL
31 RIGHT
32 DOWN
33 MARK, INDEX
34 SUBTITLE, TIMER
Display Indicators
1 2 3 4 5 6 7
8 9 10 11 12 13
1 The DVD Deck is active
2 The status of the DVD deck is graphically
displayed
3 The number to the right of the “TITLE” symbol is
the current title number
4 The time, counter position, time remaining or
current deck status is displayed
5 The status of the VCR deck is graphically displayed
6 Recording is in progress and blinks when the VCR
is in PAUSE mode
7 The VCR Deck is active
8 3D Sound is active
9 A DVD with a DTS soundtrack is loaded
10 The number to the right of the “CHAP” symbol is
the current title number
11 The current TV show or video is broadcast in
Stereo
12 A Timer Recording is programmed or in progress.
13 DVD to VHS copy is in progress
Accessories
GB
You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR).
Together with your DVD-VCR, you will find the following accessories in the box.
REMOTE CONTROL
& BATTERIES
8
AUDIO & VIDEO
CABLE
OWNER’S
INSTRUCTIONS
COAXIAL CABLE
9
00114A DVD-V6500/XSA-GB1 11/21/02 1:51 PM Page 10
GB
Deciding How to Connect DVD-VCR
You must take into account various factors when connecting audio or video systems:
◆ Types of connectors available on your systems
◆ Systems connected permanently to the DVD-VCR (satellite receiver for example) or
temporarily (camcorder for example)
Your DVD-VCR is equipped with the following connectors.
Connector Location Type Direction Recommended Use
LINE
Audio output Rear Audio RCA Out ◆ Audio out (DVD only)
COMPONENT Rear RCA Out ◆ COMPONENT out (DVD only)
output
S-VIDEO Rear S-JACK Out ◆ S-Video out (DVD only)
output
Rear Audio/Video RCA In/Out ◆ Television
◆ Other VCR
Connecting DVD-VCR to the TV using the Coaxial Cable
To receive television programmes a signal must be received from
one of the following sources:
◆ An outdoor aerial
◆ An indoor aerial
◆ A cable television network
◆ A satellite receiver
☛ Make sure that both the television and the DVD-VCR are
switched
off before connecting the cables.
1 Remove the aerial or network input cable from the television.
2 Connect this cable to the 75Ω coaxial socket marked on the
rear of your DVD-VCR.
3 Plug the coaxial cable supplied into the socket on your
DVD-VCR.
4 Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
5 To obtain better quality pictures and sound on your television, you
can also connect your DVD-VCR to the television via the RCA
cable (see section below) if your television is equipped with this
type of connection.
TV
4
Connecting DVD-VCR to the TV using the RCA Cable
Aerial
TV
GB
2
3
Digital AUDIO Rear Optical Out ◆ Digital Audio out (DVD only)
output coaxial
OUT TO TV Rear 75 Ω Out ◆ Television
coaxial
IN FROM ANT. Rear 75 Ω In ◆ Aerial
☛ Whenever you connect an audio or video system to your DVD-VCR, ensure that allelements
are switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions
and associated safety precautions.
10
coaxial ◆ Cable television network
◆ Satellite receiver
3
RF coaxial cable
You can connect your DVD-VCR to the television using the RCA cable if the appropriate input is available
on the television. You thus:
◆ Obtain better quality sound and pictures
◆ Simplify the setting up procedure of your DVD-VCR
☛ ◆ Regardless of the type of connection chosen, you must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off.
◆ Make sure that both the television and the DVD-VCR are switched
2
o f f before connecting the cables.
1 Connect the coaxial cable as indicated in the above section.
2 Connect one end of the RCA Audio/Video cable to the Video output and Audio L, R output socket on the rear
of the DVD-VCR.
3 Plug the other end into the appropriate connector on the television.
11
00114A DVD-V6500/XSA-GB1 11/21/02 1:51 PM Page 12
GB
Connecting Other Equipment to Your DVD-VCR
You can connect other audio and/or video equipment to your DVD-VCR in different ways. The following
illustrations give a few examples of the connection possibilities.
➢ The RCA input/output connectors on the rear of the DVD-VCR are used for
equipment, such as camcorders, VCRs or sound systems.
Camcorder
VCR
REAR OF THE DVD-VCR
Sound system
Plug & Auto Set Up
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
1 Connect the coaxial cable as indicated on page 11.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
2 Plug the DVD-VCR into the mains.
Result: The LANGUAGE SET menu is displayed.
3 Select the required language by pressing the or buttons.
4 Press ENTER to store the language selected.
Result: A message appears.
5 Press ENTER to start the auto scanning.
◆ The number of stations automatically stored by the DVD-VCR
depends on the number of stations that it has found.
6 On completion, press RETURN twice to exit the menu.
◆
Auto preset can be performed by pressing (STOP) on the
➢
DVD-VCR continuously for 5 seconds or more with no tape
inserted.
PLEASE WAIT
I
■■■ ■■■■ ■■ ■■■
RETURN
AUTO SET UP
6 0
%
- - - - - - - I
GB
TV
2
12
13
00114A DVD-V6500/XSA-GB1 11/21/02 1:51 PM Page 14
GB
Tuning Your Television for the DVD-VCR
You must tune your television for the DVD-VCR only if you are not
using a RCA cable
➢ To view pictures from your DVD-VCR when a RCA cable
is used, the television must be set to the audio/video
2
4
mode (AV).
1 Switch on the television.
2 Switch on the DVD-VCR by pressing STANDBY/ON on the front of
the DVD-VCR or STANDBY/ON on the remote control.
3 Select a programme position on the television to be reserved for
use with your DVD-VCR.
4 Insert the video cassette in the DVD-VCR. Check that the
DVD-VCR starts reading the cassette; if not, press
5 Start a scan on your television or set the television to UHF
channel 36 (Australia:UHF 38 CH).
6 Fine tune the television until the pictures and sound are obtained
clearly.
7 If you cannot find the pictures and sound, or there is interference
from nearby channels, it may be necessary to change the setting
of the DVD-VCR output channel (see Setting the DVD-VCR
Output Channel on page 23 and Problems and Solutions on page
66).
8 When the picture and sound are perfectly clear, store this channel
at the desired programme position on the television.
Result: That programme is now reserved for use with your
DVD-VCR.
II
button
Deck Control Keys
GB
The DVD-VCR uses one set of controls to operate both decks. The
following keys are helpful in successfully controlling each deck.
1 STANDBY/ONButton
Press the STANDBY/ON button on the remote control or front
panel to turn on the DVD-VCR.
2 DVD Button
Press the DVD button on the remote control when you want to
control the DVD deck.
◆ The DVD indicator will light on the Front Panel Display to show
that the DVD deck is selected.
3 VCR Button
Press the VCR button on remote control when you want to control
the VCR deck.
◆ The VCR indicator will light on the Front Panel Display to show
.
that VHS deck is selected.
1
2
4 DVD-VCR Toggle
Press the SELECT button on the front panel to toggle control
between the DVD deck and the VCR deck.
➢ Before using the VCR operation of 19~41 pages, press
the VCR button on the remote control to select VCR
mode.
Before using the DVD operation of 42~64 pages, press
the SELECT button on the remote control to select and
watch DVD.
1
3
4
14
15
00114A DVD-V6500/XSA-GB1 11/21/02 1:51 PM Page 16
GB
Copying from DVD to VCR
1
2
3
4
4
The DVD-VCR allows you to copy the contents of a DVD to a VHS
tape with a press of the COPY button.
If the DVD you are attempting to copy is copy
protected, you will not be able to copy the disc. It is not
permitted to copy Macrovision® encoded DVDs.
1 Insert Disc
Insert the disc you wish to copy in the DVD deck and close the
drawer.
2 Insert VHS Tape
Insert a blank VHS videotape into the VCR deck.
3 Copy the DVD to VHS Tape
Press the COPY button on the DVD-VCR front panel.
◆ The DVD will go into Play mode and the VCR will go into Record
mode.
◆ If the DVD disc menu appears, you may need to press the PLAY
button manually to begin copying.
4 Stop the Copy Process
When the DVD is finished playing, press the VCR button on the
remote control and then press the STOP button to end the copy.
◆ You must stop the Copy process manually when the DVD movie
ends or the DVD may replay and record over and over again.
☛ For NTSC DVD or VCD copy
◆ Before starting the copy process, set the Quasi PAL to
Off in Display options of DVD SETUP. (see page 50)
◆ If Quasi PAL is On, the copy process can not active.
◆ The copy is only active PAL tape system.
Inserting Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
◆ Purchase the DVD-VCR
◆ Find that the remote control is no longer working
correctly
1 Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
2 Insert two AA, R6 or equivalent batteries, taking care to respect
the polarities:
◆ + on the battery with + on the remote control
◆ – on the battery with – on the remote control
3 Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
➢ Do not mix different battery types (manganese and
alkaline for example).
Setting the Date and Time
Your DVD-VCR contains a 24-hour clock and calendar used to:
◆ Automatically stop programme recording
◆ Preset your DVD-VCR to record a programme
You must set the date and time when:
☛ ◆ Do not forget to reset the time when you change
automatically
◆ You purchase the DVD-VCR
clocks from winter to summer time and vice versa.
1 Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2 Press the corresponding
CLOCK SET option.
3 Press the ENTER button to select this option.
Result: The CLOCK SET menu is displayed.
4 Press or to select the hour, minutes, day, month and year.
Result: The option selected flashes.
5 Press the or buttons to increase or decrease the value.
Result: The day of the week is displayed automatically.
➢ You can hold the
quickly through the values.
,
or , buttons to select the
or buttons down to scroll more
6 On completion, press RETURN twice to exit the menu.
1
MAIN MENU
CLOCK SET
RETURN ENTER
CLOCK SET
12:00 1/JAN/2002
RETURN
TUE
GB
16
17
00114A DVD-V6500/XSA-GB1 11/21/02 1:51 PM Page 18
Menu Language
GB
1 Open “MAIN MENU”
2 Set “Language”
1
3 Set menu Language
MAIN MENU
LANGUAGE SET
RETURN ENTER
LANGUAGE SET
English
Français
Deutsch
Español
Italiano
Nederlands
RETURN ENTER
With the DVD in stop mode, press the SETUP button.
Using the Up/Down and Left/Right buttons, move the selection
arrow to Language set then press ENTERbutton.
Move the selection bar to your desired Language, then press
ENTER button.
18
00114A DVD-V6500/XSA-GB2 11/21/02 1:52 PM Page 19
Presetting the Stations Automatically
☛ You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on
page 13).
Your DVD-VCR contains a built-in tuner used to receive television
broadcasts.
You must preset the stations received through the tuner. This can
be done:
◆ Plug & Auto Set up (see page 13)
◆ Automatically
◆ Manually (see page 20)
You can store up to 80 stations.
1 Press the SETUP button on the remote control.
Result: The MAIN MENU is displayed.
2 Press the corresponding
I N S T A L L A T I O N option.
3 Press the ENTER button to select this option.
Result: The INSTALLATION menu is displayed.
4 Press the corresponding or buttons, until the AUTO SET
U P option is selected.
And then press the ENTER button to select this option.
Result: A message appears, indicating that any channels
already preset on your DVD-VCR will be deleted.
5 Press ENTER to start the auto scanning.
Result: ◆ The PLEASE WAITindication flashes on the
➢ The number of stations automatically stored by the DVD-
6 If you wish to cancel the auto scanning before the end, press the
RETURN button three times to exit the menu.
television screen.
◆ The first frequency band is scanned and the first
station found is displayed and stored.
◆ The DVD-VCR then searches for the second station
and so on.
◆ When the automatic scanning procedure has
finished, the DVD-VCR switches automatically to
programme 1.
VCR depends on the number of stations that it has found.
,
or , buttons to select the
MAIN MENU
INSTALLATION
RETURN ENTER
Australia Model
INSTALLATION
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
RETURN ENTER
Newzealand Model
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN ENTER
YOUR DATA WILL BE LOST
PRESS E N T E R TO CONTINUE
INSTALLATION
R E T U R N TO EXIT
VCR
GB
➢ ◆ Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the
ones no longer required (see page 21).
AUTO SET UP
PLEASE WAIT
2
I - - - - - - - - - - - - - - - - - - - - I
RETURN
%
19
00114A DVD-V6500/XSA-GB2 11/21/02 1:52 PM Page 20
GB
Presetting the Stations Manually
MAIN MENU
INSTALLATION
RETURN ENTER
Australia Model
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
RETURN ENTER
Newzealand Model
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN ENTER
P R C H NAME
1
2
3
4
5
RETURN DELETE:CLEAR
P R :
C H : ---
M F T : N A M E : ----
RETURN
INSTALLATION
INSTALLATION
TV STATION TABLE
SWAPPING:ENTER
MANUAL TUNING
MEMORY:ENTER
☛ You do not need to preset the stations manually if you
have already set them automatically.
1 Press the SETUP button on the remote control.
Result: The MAIN MENU is displayed.
2 Press the corresponding
I N S T A L L A T I O N option.
3 Press the ENTER button to select this option.
Result: The I N S T A L L A T I O N menu is displayed.
4 Press the corresponding or buttons, until the MANUAL SET
U P
option is selected.
5 Press the ENTER button to select a MANUAL SET UP option.
Result: The TV STATION TABLE menu is displayed.
6 Press the or buttons to select a programme number as
required.
7 Press the button to preset the station.
Result: The MANUAL TUNING menu is displayed.
8 Press the or buttons to start scanning.
Result: The frequency band is scanned and the first station
found is displayed.
9 Press the or buttons until the N A M E is selected.
The station name is set automatically from the broadcast signal.
10 To change the programme’s name, press the button.
Result: The first letter of the name flashes.
,
or , buttons to select the
11 To... Then...
Select a character Press the orbutton until the
in the name required character is displayed
Move to the next or Press the or buttons
previous character respectively.
(letters, numbers or “-” character).
12 If you... Then...
Wish to store the ◆ Press the or buttons until the M F T
station displayed is selected.
Do notwish to ◆ Press the or buttons until the
store the station
displayed ◆ Press the or buttons to go on
13 Repeat this procedure from Step 6 onwards, until all the required
stations have been stored.
14 On completion, press the RETURN button three times to exit the
menu.
☛ You do not need to preset the stations manually if you
have already set them automatically.
◆ Press the or buttons to adjust the
picture, if necessary.
◆ Press ENTER to store the station
CH is selected.
scanning the frequency band and display
the next station
◆ Go back to the beginning of Step 12
Clearing a Preset Station
If you have stored a TV station:
◆ That you do not require
◆ At the wrong programme position
you can cancel it.
1 Press the SETUP button on the remote control.
2 Press the corresponding
I N S T A L L A T I O N option.
3 Press the ENTER button to select this option.
Result: The I N S T A L L A T I O N menu is displayed.
4 Press the corresponding or buttons, until the MANUAL SET
U P option is selected.
5 Press the ENTER button to select this option.
Result: The TV STATION TABLE menu is displayed.
6 Press the corresponding or buttons, until the required preset
TV station is selected. (P R)
7 Press the CLEAR button.
8 Repeat the same procedure from Step 6 onwards until all the
required stations have been cleared.
9 On completion, press the RETURN button three times to exit the
menu.
,
or , buttons to select the
MAIN MENU
INSTALLATION
RETURN
Australia Model
INSTALLATION
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
RETURN ENTER
Newzealand Model
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN ENTER
PR CH NAME
1 003
2
3
4
5
RETURN DELETE:CLEAR
INSTALLATION
TV STATION TABLE
SWAPPING:ENTER
VCRVCR
GB
ENTER
20
21
Loading...