Samsung DVD-R100E User Manual

Quick Setup Guide

external device
(VCR/satellite receiver/cable box)

Step Getting Connected

Step Basic Operation

Step

Step Getting Connected

Select one of the following three types of connections:

Antenna + DVD Recorder + TV
Antenna + VCR/satellite receiver/cable box + DVD Recorder + TV
Antenna + DVD Recorder + external decoder box + TV

The VHF/UHF RF OUT jack of this product sends only signals received through the antenna.It does not output audio/video signals.
You must use one of the following connections on this unit.

This Recorder will only record on
DVD-R, DVD-RW and DVD-RAM discs.

Antenna + DVD Recorder + TV

You can connect your DVD Recorder to the television using the
SCART cable if the appropriate input is available on the television.
You thus:

● Obtain better quality sound and pictures

● Simplify the setting up procedure of your DVD Recorder

Connect the RF cable as shown.
Connect one end of the SCART cable to the AV1 socket on the rear

of the DVD Recorder.

C Samsung Electronics

Plug the other end into the appropriate connector on the television.

English-1 English-2

AK68-00493T-00

Antenna + VCR/satellite receiver/cable box + DVD Recorder + TV

external device
(VCR/satellite receiver/cable box)

Before making or changing any rear panel connections,make sure
that all components are switched off and unplugged from the wall
outlet.

Connect the cable from the antenna/cable TV outlet to the antenna
input on your VCR/satellite receiver/cable box.

Connect the antenna output of your VCR/satellite receiver/cable box
to the ANTENNA IN of DVD Recorder using antenna cable.

Use another RF antenna cable to connect the ANTENNA OUT of
DVD Recorder to the antenna input on your TV.

Connect the AV1 connector on DVD Recorder to the SCART AV
connector on TV using a SCART cable.

Connect the AV2 connector to a SCART AV connector on
VCR/satellite receiver/cable box.

Setup “AV1 Output” using on-screen menu.
Refer to page 29 of the Instruction Manual for more information.

Antenna + DVD Recorder + external decoder box + TV

If you connect external decoder box to DVD recorder, you can
record scrambled channels received through the built-in TV tuner in
DVD Recorder.

Connect RF antenna cables as shown.
Connect the AV1 connector on this recorder to the SCART AV

connector on TV using a SCART cable.
Connect the AV2 connector to a SCART AV connector on decoder

box.
Set channel decoding function on using on-screen menu.

Refer to page 27 of the Instruction Manual for more information.

❇ We recommend using one of the discs in the table as they have

been confirmed to be compatible with this unit.
Other discs may not perform correctly.

Media Brand Speed

TDK 4x
That’s 4x

DVD-R Maxell 4x

Panasonic 4x
Ritek 4x
Verbatim 2x

DVD-RW

DVD-RAM Fuji 2x

JVC 2x
Radius 2x
TDK 2x
MCC 2x
MEI 2x

Maxell 2x
TDK 2x

Printed in Korea