Samsung DVD-E137, DVD-E237 User Manual

DVD PLAYER

DVD-E137A DVD-E137B DVD-E237

AK68-00141V

ENG NL

ENGENG

2 3

Precautions

4 5

Ensure that the mains supply in your house complies with that indicated on the identification sticker located at the back of your play. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (7~10cm). Make sure the ventilation slots are not covered. Do not stack other, or heavy devices on top of the player. Do not place the player on amplifiers or other equipment which may become hot. Before moving the player ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD player to the stand-by mode does not disconnect the electricity supply In order to separate the player completely from the mains,it has to be disconnected by unplugging the main plug, especially when left unused for a long period of time.

Protect the player from moisture (dripping or splashing and objects filled with liquids), and excess heat (e.g.fireplace) or equipment creating strong magnetic or electric fields (i.e.speakers...). Disconnect the power cable from the mains electricity supply if the player malfunctions.

Your player is not intended for industrial use but for domestic purposes only. Use of this product is for personal use only. If your player or disc has been stored in a cold atmosphere for example during transportation in the winter, wait for approximately 2 hours until they have reached room temperature, before use.

Never open the player or any of its components. It can be dangerous for you or certain fragile components. You could receive an electric shock or touch the laser beam. Do not place your eyes close to the opening of the disc tray or any other opening to look inside the player.

Be careful handle your discs with care. Hold a disc with finger on the border or hole. Always place disc with the label facing upward (in case of a single side disc). Always use a soft cloth to clean disc if necessary, wipe from the centre to the border. Always put disc back into their cases after playing and store in vertical position. Always place the disc properly into the tray using the proper guide area. Never use record cleaning sprays, benzine, static electricity liquids or any other solvent, if the disc surface is dirty. Wipe gently with a soft damp (water only) cloth, never wipe the disc in a circular motion, since circular scratches are likely to occur and could cause noise during playback.

Batteries: The battery used in this product contains chemicals that are harmful to the environment. Do not dispose of batteries in the general domestic waste. It is recommended that the replacement of the battery should be done by a technician.

Disposal of old equipment and packaging: Old equipment and packaging should not be disposed of as domestic waste, but in accordance with the appliable regulations.

For safety reasons, be sure to disconnect the AC power cord from the AC outlet.

• Do not use benzene, thinner, or other solvents for cleaning.

• Wipe the cabinet with a soft cloth.

1. Setting up

3. Caution

2. For your safety

4. Disc

5. Environmental info

6. Maintenance of Cabinet

SETUP

CONNECTIONS

BASIC

FUNCTIONS

ADVANCED

FUNCTIONS

CHANGING

SETUP MENU

REFERENCE

ENGENG

4 5

Before you start

Table of contents

If remote doesn’t operate

properly:

Open the battery cover on the back of the remote.

Insert two AAbatteries. Make sure that the polarities (+ and -) are aligned correctly.

Replace the battery cover.

• Check the polarity + - of the batteries (Dry-Cell)

• Check if the batteries are drained.

• Check if remote sensor is blocked by obstacles.

• Check if there is any fluorescent lighting nearby.

Install Batteries in the

Remote

1 2

Setup

General Features ........................................................................................................6

Disc Type and Characteristics

......................................................................................

Description-Front Panel

................................................................................................

Display Indicators ....................................................................................................10

Description-Rear Panel

..............................................................................................

Tour of the Remote Control

........................................................................................

Connections

Choosing a Connection

..............................................................................................

Basic Functions

Playing a Disc

............................................................................................................

Using the Search & Skip Functions

..........................................................................

Using the Display Function

........................................................................................

Using the Disc and Title Menu ..................................................................................20

Using the Function Menu ..........................................................................................21

Repeat Play

................................................................................................................

Advanced Functions

Adjusting the Aspect Ratio (EZ View)

........................................................................

23 Slow Repeat play

........................................................................................................

25 Selecting the Audio Language

....................................................................................

26 Selecting the Subtitle Language

................................................................................

27 Changing the Camera Angle

......................................................................................

28 Using the Instant Replay/Skip Function

....................................................................

29 Using the Bookmark Function

....................................................................................

30 Using the Zoom & 3D Sound Functions

..........................................................................

31 MP3/WMA Play

..........................................................................................................

32 Program Play & Random Play

....................................................................................

34 Picture CD Playback

..................................................................................................

Changing Setup menu

Using the Setup Menu

................................................................................................

37 Setting Up the Language Features

............................................................................

38 Setting Up the Audio Options

....................................................................................

40 Setting Up the Display Options

..................................................................................

41 Setting Up the Parental Control

..................................................................................

Reference

Troubleshooting

..........................................................................................................

44 Specifications

..............................................................................................................

Remote Control

Batteries for

Remote Control (AA Size)

User’s Manual

Video/Audio Cable

Accessories

SETUP

ENGENG

6 7

General Features

Disc Type and Characteristics

Excellent Sound

Dolby Digital, a technology developed by Dolby Laboratories provides crystal clear sound reproduction.

Screen

Video with MPEG-2 compression technology. Both regular and widescreen(16:9) pictures can be viewed.

Slow Motion

An important scene can be viewed in slow motion.

Programmed Play

You can program tracks to play in desired order. (CD, WMA, MP3)

Parental Control

The parental control allows users to set the level necessary to prohibit children from viewing harmful movies such as those with violence, adult subject matter, etc.

Various On-Screen Menu Functions

You can select various languages (Audio/Subtitle) and screen angles while enjoying movies.

EZ VIEW

Easy View can convert Letter Box images to full screen viewing on your conventional TV.

Digital Photo Viewer (JPEG)

You can view the Digital Photos on your TV.

Repeat

You can repeat a song or movie simply by pressing the REPEAT button.

MP3/WMA

This unit can play discs created from MP3/WMA files.

Instant Replay

This function is used to replay the previous 10 seconds of the movie from the current position.

Instant Skip

This function skips playback ahead 10 seconds.

• Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs.

• This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

* Discs which cannot be played with this player.

• DVD-ROM • DVD-RAM

• CD-ROM • CDV

• CDI

• HD layer of super Audio CD

• CDGs play audio only, not graphics.

Ability to play back may depend on recording conditions.

• DVD-R, +R • CD-RW

• DVD+RW, -RW

NOTE

COPY PROTECTION

This DVD player is capable of playing the following types of discs with the corresponding logos:

Both the DVD player and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play.

The Region Number for this player is described on the rear panel of the player.

Disc Markings

Play Region Number

12 Cm

8 Cm

Single-sided

240 min.

Double-sided

480 min.

Single-sided

80 min.

Double-sided

160 min.

Audio

Video

Audio

Video

Audio

• CD is recorded as a Digital Signal with better audio quality, less distortion and less deterioration of audio quality over time.

• Video with CD sound, VHS quality & MPEG-1 compression technology.

• DVD contains excellent

sound and video due to Dolby Digital and MPEG-2 system.

• Various screen and audio

functions can be easily selected through the onscreen menu.

VIDEO-CD

AUDIO-CD

12 Cm

8 Cm

74 min.

20 min.

12 Cm

8 Cm

74 min.

20 min.

Disc Types

(Logos)

Recording

Types

Disc Size

Max.

Playing Time

Characteristics

DVD

DIGITAL

SOUND

STEREO

PAL

• Play Region Number

• PALbroadcast system in U.K, France, Germany, etc.

• Dolby Digital disc

• Stereo disc

• Digital Audio disc

• DTS disc

• MP3 disc

SETUP

ENGENG

Description-Front Panel

8 9

Description-Front Panel

3456

DVD-E137B

Front Panel Controls

1. STANDBY/ON

• When the unit is first plugged in, the indicator lights. When STANDBY/ON is pressed on again, the light goes out and the player is turned on.

2. DISC TRAY

• Load the disc here.

3. DISPLAY

• Operation indicators are displayed here.

4. OPEN/CLOSE

• Press to open and close the disc tray.

5. PLAY/PAUSE ( )

• Begin or pause disc play.

6. STOP ( )

• Stops disc play.

7. SKIP ( / )

• Use to skip a scene or music.

8. EZ VIEW

• Easy View can convert Letter Box images to full screen viewing on your conventional TV.

4567 8

DVD-E237

DVD-E137A

345678

SETUP

ENGENG

Display Indicators

10 11

1. Disc type indicators

2. Play / Pause / Forward play

3. Displays various messages concerning operations such as PLAY, STOP, LOAD ...

no DISC : No disc loaded. OPEN : The disc tray is open. LOAD : Player is loading disc information.

Front Panel Display

Rear Panel

Description-Rear Panel

1. DIGITAL AUDIO OUT JACKS

• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver. Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.

2. ANALOG AUDIO OUT JACKS

• Connect to the Audio input jacks of your television, audio/video receiver.

3. VIDEO OUT JACKS

• Use a video cable to connect to the Video input jack on your television.

4. S-VIDEO OUT JACK

• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality picture. The S-Video must be selected in the VIDEO OUT SELECT.

5. COMPONENT VIDEO OUT JACKS

• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y video. Along with S-Video, Component Video provides the best picture quality. The COMPONENT must be selected in the VIDEO OUT SELECT.

6. VIDEO OUT SELECT SWITCH

• Use the switch to set video out. If COMPONENT is selected, S-Video may not work. If S-Video is selected, COMPONENT may not work.

* Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.

NOTE

SETUP

ENGENG

Tour of the Remote Control

1. DVD POWER Button

• Turns the power on or off.

2. NUMBER Buttons

3. STEP Button

• Advances play one frame at a time.

4. I.REPLAY Button

• This function is used to replay the previous 10 seconds of the movie from the current position.

5. EZ VIEW Button

• Easy View can convert Letter Box images to full

screen viewing on your conventional TV.

6. SEARCH Buttons ( / )

• Allows you to search forward/backward through a

disc.

7. STOP Button ( )

8. DISC MENU Button

• Brings up the Disc menu.

9. TITLE MENU Button

• Brings up the Title menu.

10. CLEAR Button

• Use to remove menus or status displays from the

screen.

11. BOOKMARK Button

12. MENU Button

• Brings up the DVD player’s setup menu.

13. OPEN/CLOSE Button

• To open and close the disc tray.

14. 3D Button

15. I.SKIP Button

• This function skips playback ahead 10 seconds.

16. PLAY/PAUSE Button ( )

• Begin/Pause disc play.

17. SKIP Buttons ( / )

• Use to skip the title, chapter, or track.

18. RETURN Button

• Returns to a previous menu.

19. INFO Button

• Displays the current disc mode.

20. ENTER/DIRECTION Button (UP/DOWN or LEFT/RIGHT Buttons)

• This button functions as a toggle switch.

21. ANGLE Button

• Use to access various camera angles on a DVD.

22. MODE Button

• Allows you to program a specific order.

23. SUBTITLE Button

24. AUDIO Button

• Use this button to access various audio functions on

a disc.

25. REPEAT A-B Button

• Use to mark a segment to repeat between Aand B.

26. REPEAT Button

• Allows you to repeat play a title, chapter, track, or

disc.

27. ZOOM Button

• Enlarges the DVD picture.

DVD Function Buttons

Tour of the Remote Control

12 13

113

16 17 18

19 20

21 22

23 24

25 26

3 4

5 6

7 8

11 12

CONNECTIONS

ENG

Choosing a Connection

TV (Normal, Widescreen, Projection, etc..)

Method 1

Method 2

Method 3

Connection to a TV (For Video)

Method 1 Method 2

Method 3

DVD

PLAYER

Good

picture

Better

picture

Best

picture

Basic Audio

DVD Player + TV with Video Input Jack DVD Player + TV with S-Video Input Jack

(If S-Video is selected in the VIDEO OUT SELECT.) DVD Player + TV with Component Video Jacks

(If COMPONENT is selected in the VIDEO OUT SELECT.)

Audio Output

Jacks

AV Cable

S-Video

Cable

Video

Cables

Video Output

Jack

S-Video Jack

Component Video

Jacks

NOTE

• If COMPONENT is selected, S-Video will not work.

• If S-Video is selected, COMPONENT will not work.

ENG

14 15

Choosing a Connection

Before Connecting the DVD Player

Connection to an Audio System

Method 1 Method 2

AUDIO

SYSTEM

DVD

PLAYER

The following show examples of connections commonly used to connect the DVD player with a TV and other components.

• Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.

• Refer to the owner’s manual of the additional components you are connecting for more information on those particular components.

Analog Audio Out

Digital Audio Out

2ch Amplifier

Audio Input Jacks

Dolby Digital Decoder

Digital Audio Input Jacks

BASIC

FUNCTIONS

ENGENG

16 17

Playing a Disc

RESUME function

When you stop disc play, the player remembers where you stopped, so when you press PLAY ( ) again, it will pick up where you left off. (unless the disc is removed, the STOP ( ) button is pressed twice or the player is unplugged.)

• If the player is left for 5 minutes in pause mode, it will stop.

• If the player is left in the stop mode for more than 30 minutes, the power will automatically shut off. (Automatic Power-Off Function)

• If the player is left in the stop mode for more than one minute without any user interaction, a screen saver will be activated, and the TV screen will fade in and out repeatedly. Press the PLAY ( ) button to resume normal play.

• This icon indicates an invalid button press.

NOTE

Step Motion Play (Except CD)

Press the STEP button on the remote during play.

- Each time the button is pressed, a new frame will appear.

- No sound is heard during STEP mode.

- Press PLAY/PAUSE ( ) to resume normal play. (You can only perform step motion play in the forward direction.)

Slow Motion Play (Except CD)

Press the button on the remote during PAUSE or STEP mode. By pressing the button, you can select slow motion play for 1/8, 1/4 or 1/2 of normal speed.

- No sound is heard during slow mode.

- Press PLAY/PAUSE ( ) to resume normal play.

- When playing a DVD/VCD, reverse slow motion play will not work.

Playing a Disc

Before Play

Play

• Turn on your TV and press the TV/VIDEO button to select the video mode.

• Turn on your Audio System and select AUX, CD or DVD.

After plugging in the player, the first time you press the DVD POWER button, this screen comes up : If you want to select the language, press a NUMBER button. (This screen will only appear the very first time you plug in the player.)

Press the OPEN/CLOSE button.

The STANDBY indicator light goes out and the tray opens.

Place a disc gently into the tray with the disc’s label facing up.

Press the PLAY/PAUSE ( ) button or OPEN/CLOSE button to close the disc tray.

Stopping Play

Press the STOP ( ) button during play.

Removing Disc

Press the OPEN/CLOSE button.

Pausing Play

Press the PLAY/PAUSE ( ) or STEP button on the remote during play.

- Screen stops, no sound.

- To resume again, press PLAY/PAUSE ( ) button once again.

SELECT MENU LANGUAGESELECT MENU LANGUAGE

1 2 3 4

5 6

BASIC

FUNCTIONS

ENGENG

Using the Display Function

When Playing a DVD/VCD/CD

During play, press the INFO button on the remote. Use the UP/DOWN buttons to select the desired

item. Use the LEFT/RIGHT buttons to make the desired

setup, then press ENTER.

• You may use the number buttons of the remote control to directly access a title, chapter or to start the playback from the desired time.

To make the screen disappear, press the INFO button again.

To access the desired title when there is more than one in the disc. For example, if there is more than one movie on a DVD, each movie will be identified.

Most of DVD discs are recorded in chapters so that you can quickly find a specific passage.

Allows playback of the film from a desired time. You must enter the starting time as a reference.

Refers to the language of the film soundtrack. In the example, the soundtrack is played in English 5.1CH. A DVD disc can have up to eight different soundtracks.

Refers to the subtitle languages available in the disc. You will be able to choose the subtitles language or, if you prefer, turn them off from the screen. A DVD disc can have up to 32 different subtitles.

A surround sound effect is generated using only two front speakers.

When in VCD 2.0 mode (MENU ON mode), this function does not work.

What is a Chapter?

Each Title on a DVD is usually divided into chapters (similar to tracks on an audio CD).

What is a Title?

A DVD may contain several different titles. For example, if a disc contains four different movies, each might be considered a title.

NOTE

1 2

DVD

Title

Time

Audio

Chapter

Subtitle

0:00:13

ENG 5.1CH

Off

ENTER

3D Sound

Track

Time

3D Sound

0:00:48

Off

ENTER

DVD

VCD

Track

Time

3D Sound

0:00:48

Off

ENTER

VCD

Title

Chapter

Time

Audio

Subtitle

3D Sound

Using the Search & Skip Functions

During play, you can search quickly through a chapter or track or use the skip function to jump to the next selection.

Searching through a Chapter or Track

Skipping Tracks

Press the or button on the remote and press again to search at a faster speed on the DVD, VCD, CD.

During play, press the or button.

• When playing a DVD, if you press the button, it moves to the next chapter. If you press the button, it moves to the beginning of the chapter. One more press makes it move to the beginning of the previous chapter.

• When playing a VCD 2.0 in MENU OFF mode, a VCD 1.1 or a CD, if you press the button, it moves to the next track. If you press the button, it moves to the beginning of the track. One more press makes it move to the beginning of the previous track.

• If a track exceeds 15 minutes when playing a VCD and you press the button, it moves forward 5 minutes. If you press the button, it moves backward 5 minutes.

DVD VCD CD

2X, 4X, 8X, 16X, 32X, 128X 4X, 8X 2X, 4X, 8X

BASIC

FUNCTIONS

ENGENG

20 21

Using the Function Menu

Press the MENU button during playback. Use the UP/DOWN buttons to highlight Function,

then press the RIGHT or ENTER button. Function selection screen appears, Info, Zoom,

Bookmark, Repeat and EZ View.

- Info (See Page 19)

- Zoom (See Page 31)

- Bookmark (See Page 30)

- Repeat (See Page 22)

- EZ View (See Page 23~24)

Use the UP/DOWN button to highlight one of the 5 functions. Then press the RIGHT or ENTER button to access the function.

1 2

• You can also directly select these functions using thier respective buttons on the remote.

NOTE

Using the Function Menu

DVD

Setup

Title Menu

Disc Menu

Function

Info Zoom Bookmark Repeat EZ View

ENTER RETURN MENU

Using the Disc and Title Menu

DVD

Setup

Press ENTER key for Disc Menu

Title Menu

Function

Disc Menu

ENTER RETURN MENU

DVD

Setup

Disc Menu

Title Menu

Function

ENTER RETURN MENU

Press ENTER key for Title Menu

Using the Title Menu

During the playback of a DVD disc, Press the MENU button on the remote.

Select Title Menu using the UP/DOWN buttons, then press the RIGHT or ENTER button.

1 2

Using the Disc Menu

During the playback of a DVD disc, press the MENU button on the remote.

Select Disc Menu using the UP/DOWN buttons, then press the RIGHT or ENTER button.

1 2

• Depending on the disc, the Title and Disc Menus may not work.

• Title Menu will only be displayed if there are at least two titles in the disc.

• You can also use the Title Menu and the Disc Menu, using the TITLE MENU and the DISC MENU buttons on the remote.

• In VCD2.0, the DISC MENU button works as a conversion switch between Menu On and Menu Off mode.

NOTE

BASIC

FUNCTIONS

ENGENG

Adjusting the Aspect Ratio (EZ View)

To play back using aspect ratio (DVD)

If you are using a 16:9 TV

Press the EZ VIEW button.

• The screen size changes when the button is pressed repeatedly.

• The screen zoom mode operates differently depending on the screen setting in the initial setup menu.

• To ensure correct operation of the EZ VIEW button, you should set the correct aspect ratio in the initial setup (See page 42).

For 16:9 aspect ratio discs

• Wide Screen Displays the content of the DVD title in 16:9 aspect ratio.

• Screen Fit The top and bottom of the screen are cut off. When playing a

2.35:1 aspect ratio disc, the black bars at the top and bottom of the screen will disappear. The picture will look vertically stretched. (Depending on the type of disc, the black bars may not disappear completely.)

• Zoom Fit The top, bottom, left and right of the screen are cut off and the central portion of the screen is enlarged.

For 4:3 aspect ratio discs

• Normal Wide Displays the content of the DVD title in 16:9 aspect ratio. The picture will look horizontally stretched.

• Screen Fit The top and bottom of the screen are cut off and the full screen appears. The picture will look vertically stretched.

• Zoom Fit The top, bottom, left and right of the screen are cut off and the central portion of the screen is enlarged.

• Vertical Fit When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at the left and right of the screen in order to prevent the picture from looking horizontally stretched.

Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.

When playing a DVD

Press the REPEAT button on the remote. Repeat screen appears.

Select Chapter, Title or A-B using the LEFT/RIGHT buttons.

REPEATA-B

• Press the REPEAT button. Select A-B on screen with the LEFT/RIGHT buttons or press the REPEATA-B button on the remote.

• Press ENTER at the point where you want the repeat play to start (A). The B is automatically highlighted.

• Press ENTER at the point where you want the repeat play to stop (B).

• To terminate the function, press the CLEAR button or the REPEATA-B button again.

• A-B REPEAT does not allow you to set point (B) until at least 5 seconds has elapsed after point (A) has been set.

Press ENTER. To return to normal play, press REPEAT again,

then press the LEFT/RIGHT buttons to select Off. Press ENTER, then press the PLAY/PAUSE button.

OfOff

Chapter Title A - B

ENTER

Off

Track Disc A - B

ENTER

NOTE

• DVD repeats play by chapter or title, CD and VCD repeat play by disc or track.

• Depending on the disc, the Repeat function may not work.

• When in VCD 2.0 mode (MENU ON mode), this function does not work.

DVD

VCD/CD

1 2

3 4

Repeat Play

BASIC

FUNCTIONS

ENGENG

24 25

Slow Repeat play

When playing a DVD

During play, press the PLAY/PAUSE ( ) button. Press the button to choose the play speed between 1/8X, 1/4X and 1/2X of

normal. Press the REPEAT A-B button to select the point where the function starts. (A) Press the REPEAT A-B button to select the point where the function ends. (B)

NOTE

• The disc will play from A to B repeatedly at the speed you chose.

• To terminate the function, press the CLEAR button or the REPEATA-B button again.

• A-B REPEAT does not allow you to set point (B) until at least 5 seconds has elapsed after point (A) has been set.

This feature allows you slowly repeat scenes containing sports, dancing, musical instruments being played etc. so you can study them more closely.

1 2

3 4

Adjusting the Aspect Ratio (EZ View)

For 16:9 aspect ratio discs

• 4:3 Letter Box Displays the content of the DVD title in 16:9 aspect ratio. The black bars will appear at the top and bottom of the screen.

• 4:3 Pan Scan The left and right of the screen are cut off and displays the central portion of the 16:9 screen.

• Screen Fit The top and bottom of the screen are cut off and the full screen appears. The picture will look vertically stretched.

• Zoom Fit The top, bottom, left and right of the screen are cut off and the central portion of the screen is enlarged.

For 4:3 aspect ratio discs

• Normal Screen Displays the content of the DVD title in 4:3 aspect ratio.

• Screen Fit The top and bottom of the screen are cut off and the full screen appears. The picture would look vertically stretched.

• Zoom Fit The top, bottom, left and right of the screen are cut off and the central portion of the screen is enlarged.

NOTE

• This function may behave differently depending on the type of disc.

If you are using a 4:3 TV

ADVANCED

FUNCTIONS

ENGENG

Selecting the Subtitle Language

You can select a desired subtitle quickly and easily with the SUBTITLE button.

Using the SUBTITLE button

Press the SUBTITLE button. Use the LEFT/RIGHT buttons to select the

desired subtitle language. Use the UP/DOWN buttons to determine

whether or not the subtitle will be displayed.

- Initially, the subtitling will not appear on screen.

- The subtitle languages are represented by abbreviations.

ENG On

ENG Off

NOTE

• This function depends on what languages are encoded on the disc and may not work with all DVDs.

• ADVD disc can contain up to 32 subtitle languages.

•

How to have the same subtitle language come up whenever you play a DVD;

Refer to “Setting Up the Language Features” on page 39.

1 2

26 27

Selecting the Audio Language

You can select a desired language quickly and easily with the AUDIO button.

Using the AUDIO button

Press the AUDIO button. Use the LEFT/RIGHT buttons to select the

desired language on a DVD.

- The audio languages are represented by abbreviations.

Use the LEFT/RIGHT buttons to select Stereo, LEFT or RIGHT. (On VCD/CD)

NOTE

• This function depends on what languages are encoded on the disc and may not work with all DVDs.

• ADVD disc can contain up to 8 audio languages.

•

How to have the same audio language come up whenever you play a DVD;

Refer to “Setting Up the Language Features” on page 39.

DVD

VCD/CD

1 2

+ 31 hidden pages