SAMSUNG DVD-E135 Service Manual Disassembly & Reassembly

Samsung Electronics

5-1

5. Disassembly and Reassembly

5-1 Cabinet and PCB

5-1-1 Top Cabinet Removal

1) Remove 3 Screws Πon the back Top Cabinet.

2) Lift up the Top Cabinet in direction of arrow.

Π3 SCREWS

Fig. 5-1 Top Cabinet Removal

Note : Reassembly in reverse order.

5-2

Samsung Electronics

Disassembly and Reaasembly

5-1-2 Door-Tray Removal

1) Supply power and open Tray Œ.

2) Disassemble the Door-Tray ´ in direction of arrow “A”.

3) Close Tray Πand power off.

Note : If Tray Œ doesn’t open, insert a Screw driver ¨ into the Emergency hole ˇ (as shown in detailed draw-

ing) and then push it in the direction of arrow “B”. Open Tray manually.

"A"

ΠTRAY

´ DOOR-TRAY

<Side View>

ˇ EMERGENCY HOLE

¨ SCREW DRIVER

"B"

Fig. 5-2 Door-Tray Removal

Disassembly and Reaasembly

Samsung Electronics

5-3

¨ 2 HOOKS

Π2 HOOKS

ˆ ASS'Y FRONT-CABINET

ˇ 1 HOOK

´ 1 HOOK

Fig. 5-3 Ass’y Front-Cabinet Removal

5-1-3 Ass’y Front-Cabinet Removal

1) Remove Knob-Volume Œ and Ass’y Front-Cabinet ´.

2) Remove Knob-Jog ˇ and 5 Screws ¨ and Key PCB ˆ.

5-4

Samsung Electronics

Disassembly and Reaasembly

DCN1

DCN2

DCN3

DECK-ASS'Y

Π3 SCREWS

FLAT-CABLE

CONNECT-WIRE

MAIN PCB

5-1-4 Ass’y Deck Removal

1) Disconnect Flat-Cable,Connect-Wire from DCN1, DCN2 on Main PCB.

2) Remove 3 Screws Œ from the Ass’y Deck and lift it up.

Fig. 5-4 Ass’y Deck Removal