Samsung DA-E670 User Manual [it]

DA-E670

Wireless Audio with Dock

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more a complete service,
please register your product at

www.samsung.com/register

features

AllShare Play

Play music saved on your devices (such as your PC, Smart phone, or NAS) through the Wireless Audio with Dock
via a network connection.

AirPlay

Play music saved on your Apple devices on the Wireless Audio with Dock.

Dual Docking Audio Speaker System

Using the system's dual docking station, dock, charge, and then play either Samsung Galaxy devices or Apple
devices through the system's built-in speakers.

USB Host support

Connect and play music files from external USB storage devices such as MP3 players, USB flash memory, etc.
using the Wireless Audio with Dock's USB HOST function.

Bluetooth Function

Connect a Bluetooth device to the Wireless Audio with Dock and enjoy music from the device with high quality
stereo sound, all without wires!

®

aptX

aptX enables high quality Bluetooth stereo audio, delivering wired audio quality wirelessly.

LICENSE

AirPlay, AirPlay logo, iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are trademarks of Apple
Inc., registered in the U.S. and other countries. iPad is a trademark of Apple lnc.

2

EnG

safety information

SAFETY WARNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates “dangerous voltage”

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

• This apparatus shall always be connected to a AC outlet with a protective grounding connection.

• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains

plug shall be readily operable.

CAUTION

• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the

apparatus.

• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power

plug must be easily and readily accessible at all times.

Wiring the Main Power Supply Plug (UK Only)

inside the product that presents a risk of
electric shock or personal injury.

This symbol indicates important instructions
accompanying the product.

IMPORTANT NOTICE

The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated
on the pin face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must be used.
Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required, it must be of
the same colour as the fuse fitted in the plug. Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power
point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance.
However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not
connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord.
Never attempt to insert bare wires directly into a mains socket. A plug and fuse must be used at all times.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:– BLUE = NEUTRAL BROWN = LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows:–
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK.
The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.

WARNING : DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE

LETTER E OR BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.

Hereby, Samsung Electronics, declares that this [Wireless Audio with Dock] is in compliance
with the essential requirements and other relevant provisions of Directive 1999/5/EC.
The official Declaration of Conformity may be found at http://www.samsung.com,
go to Support > Search Product Support and enter the model name.
This equipment may be operated in all EU countries.

In France, this equipment may only be used indoors.

3

PRECAUTIONS

3.9 inch 3.9 inch

2.7 inch

3.9 inch

99.1mm

99.1mm

68.6mm

99.1mm

Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker located on the
back of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (70~100

unit

mm). Make sure the ventilation slots are not covered. Do not place the
unit

is designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to

on amplifiers or other equipment which may become hot. This

leave it unused for a long period of time.

During thunderstorms, disconnect the AC plug from the
wall outlet. Voltage peaks due to lightning could damage the unit.

Do not expose the unit to direct sunlight or other heat sources.
This could cause the unit to overheat and malfunction.

Phones

product

Protect the

from moisture (i.e. vases) , and excess heat
(e.g.fireplaces) or equipment creating strong magnetic or electric fields
Disconnect the power cable from the AC supply if the unit malfunctions.

product

Your

is not intended for industrial use. This product is for

personal use only.
Condensation may occur if your

atures. If transporting the

product

unit

during the winter, wait approxi

has been stored in cold temper-

mately 2 hours

until the unit has reached room temperature before using.

4

The batteries used with this product contain chemicals that are harmful to
the environment.
Do not dispose of batteries in the general household trash.

contents

EnG

FEATURES

2

SAFETY INFORMATION

3

GETTING STARTED

6

DESCRIPTIONS

7

REMOTE CONTROL

9

POWER ON AND VOLUME

CONTROL

10

CONNECTIONS

11

PLAYING

23

FUNCTIONS

28

TROUBLESHOOTING

2 Features
2 License

3 Safety warnings
4 Precautions

6 Before reading the user’s manual
6 What’s included

7 Top/Front/Rear Panel

9 Tour of the remote control

10 Turning the Power on/off
10 Adjusting the volume

11 Installing the Toroidal ferrite on the Power

cable
12 Using the Spacer Cover
13 Connecting a device to the Dual Dock
14 Connecting an audio device using AUX IN
15 Connecting to your Network
21 Connecting to Bluetooth devices

23 Using the TV mode (SoundShare)
23 Using the docking mode with Samsung

Galaxy and Apple Devices
25 Using the Bluetooth mode
26 Using the USB mode
27 Using AirPlay and AllShare Play mode

28 Basic functions
29 Advanced functions
30 Software upgrade (only USB mode)

31 Troubleshooting

31

APPENDIX

32

32 Specifications

5

getting started

BEFORE READING THE USER’S MANUAL

Note the following terms before reading the user manual.

Icons used in this manual

Icon Term Definition

Caution

Note

Indicates a situation where a function does not operate or settings may be
canceled.

Indicates tips or instructions on the page that help a function operate.

Safety Instructions and Troubleshooting

1) Familiarise yourself with the Safety Instructions before using this product. (See page 3)

2) If a problem occurs, check Troubleshooting. (See page 31)

Copyright

©2012 Samsung Electronics Co.,Ltd.
All rights reserved; no part or whole of this user’s manual may be reproduced or copied without the prior

written permission of Samsung Electronics Co.,Ltd.

WHAT’S INCLUDED

Check for the supplied accessories shown below.

FUNCTION

MUTE

VOL

BASS

Remote Control / Lithium Battery (3V) DC Adapter Power Cable

(Large)
(For Power Cable 1EA)

Spacer Cover/

Protection Cover

Ferrite Core LAN Cable Cloth User Manual

▪ The appearance of the accessories may differ slightly from the illustrations above.

6

Audio Cable

descriptions

PUSH

AUX INWPS/

RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

DC 14V 4A

DOCK

PUSH

AUX INWPS/

RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

DC 14V 4A

AUX INWPS/

RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

DC 14V 4A

PUSH

PUSH

AUX INWPS/

RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

DC 14V 4A

PUSH

TOP/FRONT/REAR PANEL

EnG

<TOP>

<FRONT>

DOCK

1

● DEscriptions

2

3

4

5

<REAR>

LAN

ONLY FOR

AUX INWPS/

DC 14V 4A

SERVICE

RESET

USB 5V 500mA

6

7

8

PUSH

DC 14V 4A

RESET

LAN

USB 5V 500mA

9

ONLY FOR

AUX INWPS/

SERVICE

11

10

7

PLAY/PAUSE
BUTTON

Play or pause a music file.

FUNCTION
BUTTON

VOLUME +/­BUTTON

FUNCTION
DISPLAY

DUAL DOCK

5

LAN TERMINAL

6

DC 14V

7

WPS/RESET

8

BUTTON

USB PORT

9

10

AUX IN

Switches the mode as follows :

; ; ; ; ; ; AUX (LED Off)

Controls the volume level.

When you change the mode with the Function button, the icon of the
selected mode is displayed in white on the Function Display.

The LED blinks when you turn the power on and stops blinking when
the unit is on and ready to play.

Provides a 5 pin dock for Samsung Galaxy devices and a 30 pin dock
for Apple devices.

Lets you connect to a network using a LAN cable.

Connect the unit's DC adapter to this jack.

Used in procedures for connecting the unit to wireless networks.

Connect an external USB storage device such as an MP3 player here
to play files located on the device.

Connect to the Analog output of an external device.

ONLY FOR

11

SERVICE

This jack is for service only.

▪ When you turn on this unit, there will be a 4 to 5 second delay before it produces sound.
▪ To update the product’s software via USB port, it is required to use a USB memory device.

▪ This unit can connect to mobile devices with high audio output levels. When you connect this

unit to external devices with high output levels, it may lower the audio output to protect the amp
and speakers.

▪ When disconnecting the power cable from the wall outlet, hold the plug.

Do not pull the cable.

8

remote control

TOUR OF THE REMOTE CONTROL

POWER BUTTON

Turns the unit on and off.

FUNCTION

EnG

● rEmotE control

FUNCTION BUTTON

Selects the Function mode.

PLAY/PAUSE BUTTON

Play or pause a music file.

CONTROL BUTTON

Search for the next or previous

music file.

VOL

VOLUME

Adjusts the volume level of the unit.

Installing battery in the Remote Control

MUTE

BASS

MUTE BUTTON

Mutes the sound from this unit.
Press again to restore the sound
to the previous volume level.

BASS BUTTON

Optimise the sound based on
your tastes.

1. Open the cover of the remote

control by putting your fingernail
into the gap between the cover
and body of the remote control.
Then, lift the cover and separate
it completely.

Install a 3V Lithium battery.

2.

Insert the battery into the battery
compartment with the + side facing
up.

Fit the remote control's cover to the

3.

remote control. Next, lower the cover so
that it is flush with the body of the remote,
and then press the cover into the body by
pushing the edges down with your hand.

▪ Be careful not to catch your fingernail in the gap when you lift the cover. You can damage

your fingernail.

Operation Range of the Remote Control

You can use the remote control up to 7 meters (23 feet) in a straight line from the unit. You can also operate the
remote at a horizontal angle of up to 30° from the remote control sensor.

9

power on and volume control

MUTE

FUNCTION

DOCK

DOCK

MUTE

VOL

BASS

FUNCTION

DOCK

DOCK

DOCK

TURNING THE POWER ON/OFF

DOCK

or

FUNCTION

MUTE

VOL

BASS

1. To turn on this unit, press any button on the unit's top panel when the unit is in Standby mode.

or,
Press POWER on the remote control.

2. To turn off this unit, press the +# button on the unit's top panel for more than 3 seconds.

or,
Press POWER on the remote control again.

ADJUSTING THE VOLUME

Use +,- buttons to adjust the volume. The function LEDs light from left to right when you turn the volume up and
from right to left when you turn the volume down. The LEDs do not light if you try to increase the volume when it has
already been set to maximum or try to decrease the volume when it has already been set to minimum.

DOCK

Press the +/– button on the right side of the top panel.
or,
Press VOL +/– on the remote control.

▪ The volume level increases or decreases when you press VOL +/–.
▪ You can also use the volume controls of devices connected using the Dual Dock or Bluetooth to control

the volume. However, your ability to control the volume using the volume controls of devices connected
using Bluetooth may be limited.

10

or

VOL

FUNCTION

MUTE

BASS

connections

INSTALLING THE TOROIDAL FERRITE ON THE POWER CABLE

Lift up to release the lock and open the core.

EnG

● connEctions

Close the lock back.

Wind Power cable around the core three times.

(Start winding at 5-10cm away from the plugs)

11

USING THE SPACER COVER

Attach the space cover if you want to dock a Samsung Galaxy or Apple device having no protective case onto the
Dual Dock.

- Use it for stable installation of your device considering the shape of the device.

The Dual Dock also comes with a protective cover for the 30-pin Apple device connector. Use the protective cover
for the 30-pin connector when you attach the 5-pin Samsung Galaxy device.

See the illustrations below for additional instructions.

<For Apple Device Users> <For Galaxy Device Users>

When docking a device, use appropriate support considering the docking device’s protective case
or the device’s shape for further stability.

Protective Cover

Used for docking devices having no protective case on it.

Protective Cover

Spacer Cover

Spacer Cover

▪ It is impossible to attach a device to the Dual Dock that has a case thicker than 1.5 mm or an unusual

rounded bottom.

12

CONNECTING A DEVICE TO THE DUAL DOCK

DC 14V 4A

WPS/
RESET

AUX IN

ONLY FOR
SERVICE

LAN

USB 5V 500mA

PUSH

DC 14V 4A

WPS/
RESET

AUX IN

ONLY FOR
SERVICE

LAN

USB 5V 500mA

DC 14V 4A

WPS/
RESET

AUX IN

ONLY FOR
SERVICE

LAN

USB 5V 500mA

WPS/
RESET

AUX IN

ONLY FOR

SERVICE

LAN

USB 5V 500mA

PUSH

How to connect a device to the Dual Dock.

EnG

PUSH

PUSH

● connEctions

PUSH

PUSH

LAN

ONLY FOR

USB 5V 500mA

SERVICE

AUX IN

LAN

ONLY FOR
SERVICE

AUX IN

WPS/
RESET

USB 5V 500mA

1. The DUAL DOCK is located on the back of the product. To open, push it in gently.

2. Press the

button on the top panel of the Wireless Audio with Dock repeatedly until the icon appears in the

display.

• Each time you press the button, the selection changes as follows :

; ; ; ; ; ; AUX (LED Off)

• The selected mode is displayed in white in the Function Display.

3. If you have a Samsung Galaxy device, connect the device to the 5 pin (smaller) connector to connect to the Dual

Dock. If you have a Apple device, connect the device to the 30 pin (larger) connector on the Dual Dock.

4. Lift the device support up as shown to prevent the device from sliding or falling off the Dual Dock.

▪ Turn on your Samsung Galaxy device before you attach it to the Dual Dock.
▪ This unit doesn't support the simultaneous docking of Samsung Galaxy and Apple devices.
▪ Connect your Samsung Galaxy or Apple device to the Dual Dock before starting Docking mode.

(See page 23)

13

PUSH

AUX INWPS/

RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

DC 14V 4A

PUSH

AUX IN

Earphones

jack

CONNECTING AN AUDIO DEVICE USING AUX IN

This section explains how to connect the unit to an audio device.
This unit is equipped with one audio analog jack for connecting an audio device.

PUSH

LAN

ONLY FOR

AUX INWPS/

DC 14V 4A

SERVICE

RESET

USB 5V 500mA

LAN

ONLY FOR

USB 5V 500mA

AUX INWPS/

SERVICE

DC 14V 4A

RESET

Audio Cable

External device

AUX IN

1. Connect AUX IN (Audio) on the back of the unit to the earphone jack of the external device or audio device.

2. Press the

button repeatedly until the function LEDs are off.

• The AUX mode is active when no function LED is lit.

▪ Before moving or installing this product, be sure to turn off the power and disconnect the power cord.

14

CONNECTING TO YOUR NETWORK

You can connect your Wireless Audio with Dock to your network router using one of the methods illustrated on the
next few pages.

To connect the Wireless Audio with Dock to a Wired Network

EnG

LAN

ONLY FOR

AUX INWPS/

DC 14V 4A

SERVICE

RESET

USB 5V 500mA

PUSH

Broadband modem

Router

(with integrated router)

Broadband

or

service

Broadband

service

Broadband

modem

Please turn off the power of the Wireless Audio with Dock before you connect the LAN Cable.

1. Turn off the Wireless Audio with Dock.

2. Connect the Wireless Audio with Dock to the router using a LAN cable.

3. Turn on the Wireless Audio with Dock.

4. Press the

button on the top panel of the Wireless Audio with Dock repeatedly until the or icon

appears in the display.

• Each time you press the button, the selection changes as follows :

; ; ; ; ; ; AUX (LED Off)

5. The

or indicator lights up in red, and changes to solid white once the Wireless Audio with Dock

connects to the router.

● connEctions

▪ If you connected the LAN cable when the product is on, turn the product off, then turn it on again.
▪ If failed to connect to the network, unplug the LAN cable and connect it again, and restart the product.
▪ xDSL user needs a router to make a network connection.

15

To connect the Wireless Audio with Dock to a Wireless Network

This section describes 4 methods of connecting the Wireless Audio with Dock to a wireless network.

▪ Some of network related operations may be different than explained depending on performance and

supported functions of used AP.

▪ To configure the network connection to your router or modem, see the router or modem's user manual.
▪ The Wireless Audio with Dock supports the following security protocols:

- WEP ; Open

- WPA-PSK ; TKIP

- WPA2-PSK ; AES

▪ You can also connect the Wireless Audio with Dock to a network that does not have security and has

no password.

▪ If your wireless router supports DHCP, this Wireless Audio with Dock can use a DHCP or static IP

address to connect to the wireless network.

▪ Select a channel on the wireless router that is not currently being used, if the channel set for the

wireless router is currently being used by another device nearby, it will result in interference and
communication failure.

▪ If you select the Pure High-throughput (Greenfield) 802.11n mode and set the encryption type on

your router to WEP or TKIP, then the Wireless Audio with Dock will not support a connection in
compliance with new Wi-Fi certification specifications.

▪ Wireless LAN, by its nature, may cause interference, depending on the operating conditions (router

performance, distance, obstacles, interference with other radio devices, etc)

▪ WPS(PBC) / WPS(PIN) does not operate when the security protocol is set to WEP.
▪ If you fail to set up the network, press and hold the WPS/RESET button on the rear panel until the

or indicator blinks twice. Wait until the red light stops blinking, turn off and on the unit.

And try again.

16

To connect the Wireless Audio with Dock to your Apple device
having iOS 5.0 or above (Info Sharing)

This network set-up method is for users of Apple devices that have iOS 5.0 or later.

1. Connect the Apple device to your network.

2. Select

Dual Dock.

3. Press and hold the WPS/RESET button on the rear panel of the Wireless Audio with Dock with a pen

tip or similar item for more than 1 second. The

4. Select <Allow> in the pop-up menu on the display of the Apple device.

5. Change the mode to the

the Wireless Audio with Dock connects, the indicator stops blinking in red, and glows in white.

• The network connection is complete.

on the Wireless Audio with Dock, and then connect the iPod /iPhone /iPad device to the

icon will blink once. Release the buttom.

and then the indicator will blink in red and changes to solid white. After

To connect the Wireless Audio with Dock using WPS (PBC)

PUSH

ONLY FOR

SERVICE

1. Press the button on the top panel of the Wireless Audio with

Dock repeatedly until the

• Each time you press the button, the selection changes as
follows :

; ; ; ; ; ; AUX (LED Off)

The indicator changes from white to red and blinks.

2. Press and hold the WPS/RESET button on the rear panel with a

pen tip or similar item for more than 1 second. The indicator
blinks once in white. After the indicator blinks, release the
button.

• The indicator blinks in red.

3. Push the WPS/RESET button on your router or modem within

90 seconds.

4. After the Wireless Audio with Dock connects, the

indicator changes from blinking red to white.

• The network connection is complete.

or icon appears in the display.

or

DC 14V 4A

RESET

LAN

RESET

USB 5V 500mA

LAN

USB 5V 500mA

ONLY FOR

AUX INWPS/

SERVICE

AUX INWPS/

EnG

PUSH

● connEctions

17

To connect the Wireless Audio with Dock through a JBC (JukeBox
Connect) Connection

1. Press the button on the top panel of the Wireless Audio with Dock repeatedly until the or

icon appears in the display.

• Each time you press the button, the selection changes as follows :

; ; ; ; ; ; AUX (LED Off)

The indicator changes from white to red and blinks.

2. Press and hold the WPS/RESET button on the back panel with a pen tip or similar item for more

than 5 seconds. The indicator blinks in white once. Wait until the indicator blinks in white twice
more, and then release the WPS/RESET button.

• The indicator blinks in red, and then stops blinking and glows in red when the unit accesses the
Network Setting mode.

3.To connect the Wireless Audio with Dock to the network, search for "Samsung W_Audio E670
XXXXXXX" in the Wi-Fi Setting list of your WI-Fi device, and then select it.

ex) Samsung Galaxy Device

4.Open the web browser of the Wi-Fi device, and then type
"http://192.168.1.1" into the address bar of the Internet browser
to access the Wireless Audio with Dock's web page.

5.In the "

Service Set ID (SSID)

" field, select the AP device (router

or modem) your Wi-Fi device is connected to.

6.Type the AP device's password into the "

WPA Passphrase

"
filed. If you want to set the static IP, press advanced settings. Fill
in the desired static IP address.

7.Press <Apply>.

If a warning appears on your Wi-Fi device, click OK.

8.When the connection between the Wireless Audio with Dock and

AP you selected is completed, the indicator on the Wireless
Audio with Dock changes to white.

• The Wireless Audio with Dock connection is complete.

The picture above is the screen which will appear on the display after

completing the network connection successfully, so you can run AirPlay
or DLNA normally.

5

6

6

7

18

To connect the Wireless Audio with Dock using a WPS PIN

1. Press the button on the top panel of the Wireless Audio with Dock repeatedly until the or

icon appears in the display.

• Each time you press the button, the selection changes as follows :

; ; ; ; ; ; AUX (LED Off)

The indicator changes from white to red and blinks.

2. Press and hold the WPS/RESET button on the back panel with a pen tip or similar item for more

than 5 seconds. The indicator blinks in white once. Wait until the indicator blinks in white twice
more, and then release the WPS/RESET button.

• The icon blinks in red, and then stops blinking and glows in red when the unit accesses the
Network Setting mode.

3. To connect the Wireless Audio with Dock to the network, search for "Samsung W_Audio E670
XXXXXXX" in the Wi-Fi Setting list of your WI-Fi device, and then select it.

ex) Samsung Galaxy Device

EnG

● connEctions

4. Open the web browser of the Wi-Fi device, and then type "http://192.168.1.1" into the address bar
of the Internet browser.

5. Press or touch Samsung Wireless Audio with Dock Status.

6. The WPS PIN number appears on the bottom of the

screen. Note or write down the number, and then turn the
Wireless Audio with Dock unit off and then on.

7. Access the Wi-Fi set-up page of your AP (wireless router or
modem) using your PC or other Internet ready device, and
then set the Wi-Fi settings to the PIN method. Refer to the
user's manual of your router or modem for instructions.

8. Type the Wireless Audio with Dock's WPS PIN number into
the appropriate field of the Wi-Fi setup page.

9. Press and hold the WPS/RESET button on the back panel
of the Wireless Audio with Dock with a pen tip or similar item for more than 10 seconds in the
or

mode. The indicator blinks once in white, and then twice. Wait until the indicator blinks three

times, and then release the button.

• The icon blinks in red.

10. If the connection between the Wireless Audio with Dock and the AP is completed within 90

seconds, the indicator changes from red to white.

• The Wireless Audio with Dock connection is complete.

6

▪ The Wi-Fi Direct function is not supported by this product.

Direct connection may succeed in some cases, but it is not supported function by this
product.

19

BLUETOOTH

You can connect the Wireless Audio with Dock to Bluetooth devices and enjoy music with high quality stereo
sound, all without wires!

What is Bluetooth?

Bluetooth technology lets Bluetooth-compliant devices interconnect easily with each other using a short
wireless connection.

• A Bluetooth device may cause noise or malfunction, depending on usage, when:

- A part of your body is in contact with the receiving/transmitting system of the Bluetooth device or

the Wireless Audio with Dock.

- It is subject to electrical variation from obstructions caused by a wall, corner, or by office partitioning.

- It is exposed to electrical interference from same frequency-band devices including medical

equipment, microwave ovens, and wireless LANs.

• Keep the Wireless Audio with Dock and the Bluetooth device close together when pairing.

• The further the distance between the Wireless Audio with Dock and Bluetooth device, the worse the

quality. If the distance exceeds the Bluetooth operational range, the connection is lost.

• In poor reception-sensitivity areas, the Bluetooth connection may not work properly.

• The Bluetooth connection only works when the Bluetooth device is close to the set. The connection is

automatically cut off if the Bluetooth device moves out of range. Even within range, the sound quality
may be degraded by obstacles such as walls or doors.

• This wireless device may cause electric interference during its operation.

▪ You may be required to enter a PIN code (password) when connecting the Bluetooth device to

the Wireless Audio with Dock. If the PIN code input window appears, enter <0000>.

▪ The Wireless Audio with Dock supports SBC data (44.1kHz, 48kHz).
▪ The AVRCP feature is not supported.
▪ Connect only to a Bluetooth device that supports the A2DP (AV) function.
▪ You cannot connect to a Bluetooth device that supports only the HF (Hands Free) function.
▪ Only one Bluetooth device can be paired at a time.
▪ Once you have turned off the Wireless Audio with Dock and the pairing is disconnected, the

pairing will not be restored automatically. To reconnect, you must pair the devices again.

▪ The Wireless Audio with Dock may not search or connect properly in the following cases:

- If there is a strong electrical field around the Wireless Audio with Dock.

- If several Bluetooth devices are simultaneously paired to the Wireless Audio with Dock.

- If the Bluetooth device is turned off, not in place, or malfunctions

- Note that such devices as microwave ovens, wireless LAN adaptors, fluorescent lights, and

gas stoves use the same frequency range as the Bluetooth device, which can cause electric
interference.

20

CONNECTING TO BLUETOOTH DEVICES

This section explains how to connect the Wireless Audio with Dock to Bluetooth compatible TVs and other
Bluetooth devices.

To connect the Wireless Audio with Dock to a Bluetooth compatible 2012
Samsung TV (SoundShare)

EnG

DOCK

Connect

<To pair to your TV>

To produce TV sound on your Wireless Audio with Dock via Bluetooth connection, you need to pair your system to
the Bluetooth compliant TV first. Once the pairing is established, the pairing information is recorded and kept and no
further Bluetooth connection message will appear from the next time. Keep the Wireless Audio with Dock and the
TV close together before pairing. (It is recommended to pair devices within 1 meter.)

1. Turn on the Samsung TV and Wireless Audio with Dock.

•Set "Add New Device" menu to "On" in the TV. (For more information, refer to the user's guide of TV)
Menu ; System ; Device Manager ; SoundShare Settings ; Add New Device.

2. When you change the mode of Wireless Audio with Dock to
Bluetooth pairing appears. Select <Yes> on the TV screen, then the pairing with the Wireless Audio with Dock
will be completed.

•The

•The Wireless Audio with Dock Bluetooth pairing is complete.

indicator blinks, and stops blinking.

, a message asking whether to proceed with

<To cancel pairing to your TV>

If you want to pair your Wireless Audio with Dock to a TV other than the connected TV, you should cancel the
existing pairing in the Wireless Audio with Dock. It is possible to cancel the pairing in the way below.

The

LED will blink once when you press the WPS/RESET button on the rear panel of the unit for 1 second in

. This unit will automatically pair to a TV once you cancel the existing pairing and the new TV is ready for

connection.

▪ If the TV cannot be connected, please try to reconnect it after pressing the WPS/RESET button on the

rear panel of the set in the Bluetooth

mode.

▪ You should update TV software to the latest version to operate TV pairing (SoundShare) function.
▪ Check the instructions for updating and applicable models from the support page on website

(http://www.samsung.com) or contact the call centre.

21

● connEctions

To connect the Wireless Audio with Dock to a Bluetooth device

Before you begin, confirm that your Bluetooth device supports the Bluetooth compliant stereo headset function.

DOCK

DOCK

Connect

External device

1. Press the button on the top panel of the Wireless Audio with Dock repeatedly until the icon appears in the

display.

• Each time you press the button, the selection changes as follows :

; ; ; ; ; ; AUX (LED Off)

• The selected mode is displayed in white in the Function Display.

2. Select the Bluetooth menu on your Bluetooth device.

(Refer to the Bluetooth device's user manual for instructions.)

3. Scan or search for All Devices or for Headsets.

• You will see a list of devices.

4. Select "[Samsung]W_Audio XXXXXX" from the searched list.

• If the Bluetooth device fails to pair with the Wireless Audio with Dock, delete the "[Samsung]W_Audio XXXXXX"
found by the Bluetooth device, and search for the Wireless Audio with Dock again, and then repeat Steps 2, 3,
and 4.

22

playing

DOCK

PUSH

AUX INWPS/

RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

DC 14V 4A

AUX INWPS/

RESET

ONLY FOR

SERVICE

LAN

USB 5V 500mA

DC 14V 4A

PUSH

USING THE TV MODE (SoundShare)

Press the button to select the mode, and then connect the TV to the Wireless Audio
with Dock. (See page 21)

• The unit will play the TV's audio when it is connected to the TV.

• If you change the Wireless Audio with Dock's Bluetooth input source or turn it off, you will

hear audio from the TV again.

▪ You can control the volume only with the Wireless Audio with Dock.

USING THE DOCKING MODE WITH SAMSUNG GALAXY AND APPLE
DEVICES

Press the button to select the mode, and then connect the Samsung Galaxy or Apple device to the Dual
Dock. (See page 13)

<Samsung Galaxy Devices>

To use your Samsung Galaxy series device with the Dual Dock, you must download and
install the Docking Mode application from the Android Market on the device. To download,
follow these steps:

1. Tap the Play Store (Android Market) icon on the Samsung Galaxy device's main screen.

2. Tap the search icon on the screen to access the search bar.

3. In the search bar, type in the [Samsung Wireless Audio Dock], and then search.

4. In the search result list, find, and then tap [Samsung Wireless Audio

Dock] to start downloading.

5. Tap [install].

To play music, follow these steps:

-1

1

. If you start the app when the Wireless Audio with Dock is the only device

for the Bluetooth connection,
selecting PLAY in your device automatically establishes the Bluetooth
connection to the Wireless Audio with Dock and the unit plays music.

-2

1

. If there are multiple devices for Bluetooth connection including Wireless

Audio with Dock,

1) When you start the app, the list of the devices which you can connect to
the Wireless Audio with Dock will appear.

2) Play music after connecting to the Wireless Audio with Dock by
selecting it on the list of devices.

- If there exists a Bluetooth device paired to the Wireless Audio with

Dock before, it will not appear in the list and be connected
automatically.

2. If you replace the Wireless Audio with Dock which you have paired to your mobile device, you should delete

the remaining settings saved in your device before pairing to the new one.

•

; [Clear data].

EnG

● playinG

23

▪ Once you started the application, running is not disturbed by charging your mobile device with an

ordinary charger.

▪ When you connect other device to the Wireless Audio with Dock after connecting Samsung Galaxy

device in docking mode, you may have to turn off the Bluetooth mode of the Samsung Galaxy device.

▪ If you have trouble connecting the Samsung Galaxy device to the Dual Dock, turn off the devices's

Bluetooth mode.

<Apple Devices>

1. Select the mode as described above, and then connect the Apple device to the Dual Dock as described in

Connecting a Device to the Dual Dock (Page 13). You will hear a ringing sound.

2. Select the <Music> menu in the main screen of the Apple device.

3. Select and play the desired music.

• The music will play through the Wireless Audio with Dock's speakers.

▪ While playing a video with your device, Play/Pause/Next/Back operations may not be available.

Use the button on your source device to operate it.

Compatibility list (Apple Device)

Docking mode compatible iPod/iPhone/iPad models
Update the software of your iPod/iPhone/iPad to the latest version before using it with this unit.

- iPod touch (4th generation)

- iPod touch (3rd generation)

- iPod nano (6th generation)

- iPod nano (5th generation)

- iPhone 4S

- iPhone 4

- iPhone 3GS

- iPad 2

- iPad

• Depending on its version of iPod Software, your device may not be compatible or may operate
abnormally.

If you connect an incompatible Apple device, the iPod Function LED will blink.

24

USING THE BLUETOOTH MODE

Press the button to select the mode, and then connect the Bluetooth device to the
Wireless Audio with Dock. (See page 22)

To connect your Bluetooth device when the Wireless Audio with Dock is in Bluetooth mode,
search for the Wireless Audio with Dock on the device's Bluetooth list. Select the Wireless
Audio with Dock, and then connect. Once the Wireless Audio with Dock has connected,
select and play the desired music.

The music will play through the Wireless Audio with Dock's speakers.

▪ If you want to change the device which is connected through Bluetooth mode to other device,

disconnect the existing device and try to connect to the other device which you want to use.

▪ While in Bluetooth communication, Play/Pause/Next/Back operations may not be available

depending on used mobile device and application.

▪ Operating Bluetooth device paired to the Wireless Audio with Dock may cause stuttering if operated

while the Wireless Audio with Dock is playing back from AUX input.

To disconnect the Bluetooth device from the Wireless Audio With
Dock

You can cancel Bluetooth pairing from the Wireless Audio with Dock. For instructions, see the Bluetooth
device's user manual.

• The Wireless Audio with Dock will be disconnected.

EnG

● playinG

To disconnect the Wireless Audio with Dock from the Bluetooth
device

Press the button on the top panel of the Wireless Audio with Dock to switch from to another mode
or press the Power button on the remote to turn the Wireless Audio with Dock off.

• The currently connected device will be disconnected.

▪ The Bluetooth connection only works when the Bluetooth device is close to the set. The

connection is automatically cut off if the Bluetooth device moves out of range. Even within
range, the sound quality may be degraded by obstacles such as walls or doors.

▪ If the Bluetooth device comes back into the effective range, you can restart to restore the

pairing with the Bluetooth device.

25

USING THE USB MODE

PUSH

ONLY FOR

SERVICE

1. Connect the USB device to the USB port on the back of the unit.

2. Press the

the

• Each time you press the button, the selection changes as follows :

•The selected mode is displayed in white in the Function Display.

button on the top panel of the Wireless Audio with Dock repeatedly until

icon appears in the display.

; ; ; ; ; ; AUX (LED Off)

Before you connect a USB device

Read the list below to check compatibility.

• This product may not be compatible with certain types of USB storage media.

• The FAT16 and FAT32 file systems are supported.

- The NTFS file system is not supported.

• Connect a USB device directly to the USB port of the product.
Otherwise, you may encounter a USB compatibility problem.

• Do not connect multiple storage devices to the product via a
multi-card reader. It may not operate properly.

• Digital camera PTP protocols are not supported.

• Do not remove the USB device while it is being read.

• DRM-protected music files (MP3, WMA) from a commercial web

site can not be played.

• External HDDs are not supported.

• Compatibility list

Format Music

F

ile name

F

ile extension

Bit rate

Version

Sampling Frequency

MP3 WMA

.MP3 .WMA

80~320

kbps

56~128

kbps

- V8

44.1KHz 44.1KHz

DC 14V 4A

RESET

LAN

RESET

USB 5V 500mA

LAN

USB 5V 500mA

PUSH

ONLY FOR

AUX INWPS/

SERVICE

AUX INWPS/

26

Do not connect your mobile device to the USB port and the Docking station at the same time for

recharging.

USING AIRPLAY AND ALLSHARE PLAY MODE

To use the or function, the Wireless Audio with Dock and the device which you are trying to
connect must be connected to the same AP.

<

AirPlay mode

1. Play the desired music in the <Music> menu on main screen of the Apple device.

2. Select "Samsung W_Audio E670 XXXXXXX" by pressing the

the Apple device.

•The music will play through the Wireless Audio with Dock's speakers.

When you succeed the connection between iTunes and the Wireless Audio with Dock through same IP once, the

mode will be switched automatically to AirPlay mode when you select the Wireless Audio with Dock and play
musics in iTunes in a mode other than the AirPlay mode.

_ >

icon on the screen of

EnG

● playinG

▪ It takes 3~5 seconds to respond for the set from your remote control operation.

<

AllShare Play mode

1. Select the menu on the main screen of the Galaxy device.

2. After going into [Audio] in AllShare Play, select the desired music.

3. When the <Select device> pop-up appears, select "Samsung W_Audio E670
XXXXXXX".

•The music will play through the Wireless Audio with Dock's speakers.

_ >

▪ The control function may not be supported by your device depending on the functions of the

application and the Audio Dock of your device.

27

MUTE

FUNCTION

DOCK

functions

BASIC FUNCTIONS

DOCK

Using the input mode

You can select the following inputs: ; ; ; ; ; ; AUX
(LED Off).

Press an appropriate button on the remote control to select a desired mode,
or press

to select from: ; ; ; ; ; ; AUX (LED Off).

Input mode Display

TV mode

Docking mode

BLUETOOTH mode

FUNCTION

USB mode

AirPlay mode

MUTE

VOL

BASS

AllShare Play mode

AUX input

LED Off

28

ADVANCED FUNCTIONS

POWER

VOL MUTE

FUNCTION

POWER

VOL MUTE

FUNCTION

MUTE

FUNCTION

MUTE

VOL

BASS

FUNCTION

EnG

FUNCTION

MUTE

VOL

BASS

Play/Pause

During playback, press the +# button.

• Press the +# button to stop playing the file temporarily.
Press the +# button again to play the selected file.

● functions

▪ This function may not operate in certain mode.

FUNCTION

MUTE

VOL

BASS

Skip Forward/Back

During playback, press the [,] button.

• When there is more than one file and you press the ] button, the next file
is selected.

• When there is more than one file and you press the [ button, the
previous file is selected.

▪ This function may not operate in certain mode.

FUNCTION

MUTE

VOL

BASS

Muting the sound

This is useful when answering a doorbell or telephone call.

1. To mute sound of this unit, press the MUTE (

) button of the remote

control.

2. Press MUTE (

) on the remote control again (or press VOLUME +/-) to

restore the sound.

FUNCTION

MUTE

VOL

BASS

Using the BASS function

Lets you optimise the bass sound according to your tastes.
Press BASS on the remote control of this unit.

• Each time the button is pressed, the selection changes as follows :
BASS ON ; OFF

29

SOFTWARE UPGRADE (ONLY USB MODE)

PUSH

ONLY FOR

SERVICE

1. Visit www.samsung.com.

2. Click SUPPORT on the top right of the page.

3. Enter the product's model number into the search field, and then click Find
Product.

4. Click Get downloads in the Center of the page below the Downloads

LAN

ONLY FOR

AUX INWPS/

DC 14V 4A

SERVICE

RESET

USB 5V 500mA

header.

RESET

LAN

AUX INWPS/

USB 5V 500mA

5. Click Firmware in the Center of the page.

6. Click ZIP file icon of the upgrade file.

7. Once popup window appears, click OK and continue to download and save

upgrade file onto your PC.

8. Uncompress downloaded .zip file into a certain folder of your PC.

9. Copy all files in the folder to the USB flash drive’s root directory.

• Upgrading allows only one file set for upgrading at a time.

10. Press the
repeatedly until the

button on the top panel of the Wireless Audio with Dock

icon appears in the display. Insert the USB drive into

the USB port on the back panel of the unit.

11. The LED will blink during the Software update process. The product will turn off automatically after completing
the firmware upgrade.

• It may take longer depending on the functions to upgrade. (Maximum 10 minutes)

• Turn on the product again.

PUSH

▪ Do not disconnect the power or remove the USB drive while an upgrade is being applied. The main unit

will turn off automatically after completing the firmware upgrade.

▪ When software is upgraded, settings you have made will return to their default (factory) settings.

We recommend you write down your settings so that you can easily reset them after the upgrade.

▪ If the firmware fails to upgrade, we recommend formatting the USB drive in the FAT16 format and then

trying again.

▪ For upgrading purposes, do not format the USB drive in NTFS format. It is not a supported file system.
▪ Depending on the manufacturer, the USB may not be supported.

▪ Disconnect the Wireless Audio with Dock from the Internet and any external devices before you upgrade

the software.

▪ You cannot charge other external devices through this USB port.
▪ Refer to the Upgrade Guide from the website.

30