Samsung CS-29Z45ML, CS-29Z57ML, CS-29A751JL, CS-29Z58ML User Manual [vi]

COLOUR TELEVISION

CS29Z45 / CS29Z47 / CS29Z50 / CS29Z57 CS29Z58 / CS29A730 / CS29A760 / CS29A750 / CS29B850

Owner’s Instructions

Before operating, please read this manual thoroughly, and retain it for future reference.

Register your product at www.samsung.com/global/register

Control Panel (depending on the model)

The actual configuration of your TV may be different, depending on your model.

Front (or Side) Panel

1On-screen menu display

2Volume adjustment

3Channel selection

4Remote control sensor

5Standby indicator

6Power on/off

You can use the 3 buttons to switch the TV on when it is in standby mode.

The 2 and 3 buttons also have the same function as the ◄/►/▲/▼ buttons on the remote control.

If the remote control no longer works or you have misplaced it, you can use the controls on the panel of the television.

Connection Panel (depending on the model)

The actual configuration of your TV may be different, depending on your model.

Rear Panel
	or
	cable television
	network
VIDEO
OUT	Y
IN 2	PB
IN 1	PR
	or
	cable television
	network

Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Please be sure to match the color coded input terminals and cable jacks.

Connecting to an Aerial or Cable Television Network

Connect the aerial or network input cable to the 1 (75 Ω coaxial socket).

To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable television network, or satellite network.

If you are using an indoor aerial, you may need to adjust it when tuning your television until you obtain a picture that is both sharp and clear.

Connecting to the RCA Output

The RCA2 connectors are used for equipment, such as a recording VCR or audio system.

English - 1

Connecting to the RCA Input

The RCA3 and RCA4 connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. (When using the mono equipment, connect to the AUDIO-L input connector.)

The RCA5 connectors are used for equipment such as a DVD with component output.

Front (or Side) Panel

1 Video input

2 Audio input

Please be sure to match the colour coded input terminals and cable jacks.

Connecting to the RCA Input

The 2 (AUDIO-L/R) and 1 (VIDEO) connectors are used for equipment, such as a camcorder, video disc player, or video game device.

When both the front (or side) AV and rear connectors (AV IN2) are connected to external equipment, the front (or side) AV receives priority.

AA68-04018B-00

Remote Control (depending on the model)

Operation of remote control may be affected by bright artificial light near to the TV.

1POWER

Used to switch the TV on and off.

2MENU

Used to display the on-screen menu or return to the previous menu.

3 ▲/▼/◄/►

Used to control the cursor in the menu.

P </ >

Used to display the next or previous stored channel

=+ / -

Used to increase or decrease the volume.

4 MUTE

Used to switch the sound off temporarily. To turn the sound back on, press the MUTE, =+ or =- button.

5Numeric buttons

Used to select channels directly.

6INFO

Used to view the channel information and setting status you selected.

7 SOURCE

Used to display all of the available video sources.

8TOOLS (depending on the model)

You can check the

following selection by pressing Tools button.

1.Sleep Timer(Used to select a preset time interval for automatic turn off.)

2.Picture Mode(Used to select the picture effect.)

3.Sound Mode(Used to select sound effect.)

4.Dual I-II(Used to select sound mode.)

Installing Batteries

5.Turbo Sound(Used to select the turbo sound option.)

6.Sound Adjust (Used to display the sound menu)

9 ENTER

While using the on-screen menus, press the ENTER button to activate (or change) a particular item.

0EXIT

Used to exit from any display or return to normal viewing.

! PRE-CH

Used to switch repeatedly between the last two channels displayed.

Remove the cover. Install two AAA size

batteries, then replace the cover.

When the remote control does not operate normally, check that the “+” and

“-” ends of the batteries are inserted correctly or the batteries are drained.

Do not mix battery types, i.e. alkaline and manganese.

Switching the Television On and Off

The mains lead is attached to the rear of the television.

1Plug the mains lead into an appropriate socket.

The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.

2Press the “P” button (On/Off) CH</>button on the front (or side) of the television.

3Press the POWER button on the remote control to switch the television on. The programme that you were watching last is re-selected automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Channel - Auto Store” on page 3 or “Channel - Manual Store” on page 3.

If the television is initially powered on, several basic customer settings proceed automatically. Refer to “Setup - Plug & Play” on page 3.

4Press the P</>button, or Numeric button on the remote control.

Caution: One pole switch is totally not off (one line still live) if power cord is not unplugged.

Placing the Television in Standby Mode

The television can be placed in standby mode, in order to reduce power consumption and wear of the cathode ray tube. Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1Press the POWER button on the remote control while viewing.

2To switch the television back on, simply press it again.

Do not leave the television in standby mode for long periods of time (when you are away on holiday, for example).

It is best to unplug the set from the mains and aerial.

English - 2

Viewing the Menus

1Press the MENU button.

The main menu is displayed on the screen. Its left side has five icons: Input, Picture, Sound, Channel, and Setup.

2Press the ▲ or ▼ button to select one of the icons.

Press the ENTER button to access the icon’s sub-menu.

3Press the ▲ or ▼ button to move to items in the menu.

Press the ENTER button to enter items in the menu.

4Press the ▲/▼/◄/► button to change the selected items. Press the MENU button to return to the previous menu.

5Press the EXIT button to exit from the menu.

Setup - Plug & Play

When the television is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available.

1 If the television is in standby			Plug & Play
mode, press the POWER		Start Plug & Play.
button on the remote control.
			OK
The Start Plug & Play is		Enter					Exit
displayed. To start Plug
& Play, press the ENTER			Plug & Play
button. The Language		Language
menu is displayed.		English
		Indonesia
The Language menu		Melayu
will automatically appear
after several seconds,
even if the ENTER	Move		Enter				Skip
button is not pressed.
2 Select the appropriated
language by pressing the			Plug & Play
		Check antenna input.
▲ or ▼ button. Press the
ENTER button. The Check
			OK
antenna input. is displayed.		Enter					Skip

If any language is not selected, the language menu will disappear about 30 seconds later.

continued...

3To search the channels, press the ENTER button. To stop the search, press the ENTER button.

When the channel searching has finished, the Clock Set menu is displayed.

Plug & Play

Auto Store

Start

Enter

Skip

Plug & Play

4 Press the ◄ or ► button to	Auto Store	102MHz
move to the hour or minute.	P 1
		7 %

Set the hour or minute by

pressing the ▲ or ▼ button.	Stop

5When you have finished, press the MENU button. The Enjoy your watching. is displayed, and then the channel which has been stored will be activated.

Re-setting the Plug & Play

Method:

MENU ▲/▼ (Setup) ENTER ▲/▼ (Plug & Play)

ENTER

		Enter					Skip
			Plug & Play
	Clock Set
					1 2 : 0 0			am
		Move					Enter
		Adjust					Skip
		Enjoy your watching.
				OK
	TV							Setup
		Plug & Play						
		Language		: English				
		Time						
		Child Lock						
		Blue Screen			: On			
	Move			Enter				Return

Input - Source List (depending on the model)

Source List

You can switch between viewing signal from connected equipment, such as a VCR, DVD, settop box, and the TV source (broadcast or cable).

TV		Source List
TV
AV1
AV2
Component
Move	Enter	Return

You can change the required external source simply by pressing the SOURCE button on the remote control. It might take a short period of time for pictures to be switched. To return to the TV mode, press the SOURCE button on the remote control.

Channel - Auto Store

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.

To stop the search before it has finished, press the ENTER button.

When finished, the Sort menu
						Search
is displayed. To sort the stored	P 1							102MHz
channels into the desired						7 %
numerical order, refer to
						Stop
“Channel - Sort”. To exit without
					Enter			Return
sorting, press the EXIT button.

Channel - Sort

This operation allows you to
		TV				Sort
change the programme numbers			From	: P 1
of stored channels. This			To	: P--
			Store	: ?
operation may be necessary
after using auto store.
From: Channel number to
		Move		Adjust		Return
be changed.

To: New channel number to be identified.

Store: Confirmation the exchange of channel numbers.

English - 3