The contents of this manual are subject to change without notice to improve quality.
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is
prohibited.
The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics.
Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation.
Before Using the Product
2011 Samsung Electronics
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Icons used in this manual
The following images are for reference only. Real-life situations may
differ from what is shown in the images.
Symbols for safety precautions
Warning
Caution
A serious or fatal injury may result if instructions are not followed.
Personal injury or damage to properties may result if instructions are
not followed.
Activities marked by this symbol are prohibited.
Instructions marked by this symbol must be followed.
Before Using the Product
2
Cleaning
!
Before Using the Product
Cleaning
Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Take the following steps when cleaning.
1. Power off the monitor and computer.
2. Disconnect the power cord from the monitor.
Hold the power cable by the plug and do not touch the cable with wet
hands. Otherwise, an electric shock may result.
3. Wipe the monitor with a clean, soft and dry cloth.
zDo not apply a cleaning agent that contains alcohol,
solvent, or surfactant to the monitor.
!
zDo not spray water or detergent directly on the product.
4. Wet a soft and dry cloth in water and wring thoroughly to clean the
exterior of the monitor.
5. Connect the power cord to the product after cleaning the product.
6. Power on the monitor and computer.
Before Using the Product
3
Before Using the Product
10 cm
10 cm10 cm
10 cm
10 cm
Securing the Installation Space
zKeep the required distances between the product and other objects (e.g. walls) to ensure proper
ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the
internal temperature.
The appearance may differ depending on the product.
Precautions for storage
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used
nearby.
Be sure to contact Samsung Customer Service Center (page89) if the inside of the monitor needs
cleaning. (service fee will be charged).
Safety Precautions
Electricity and Safety
The following images are for reference only. Real-life situations may differ from what is shown in the
images.
Before Using the Product
4
Before Using the Product
!
!
!
Warning
Do not use a damaged power cord or plug, or a loose power socket.
zAn electric shock or fire may result.
Do not plug many products into the same power socket.
zOtherwise, the socket may overheat and cause a fire.
Do not touch the power plug with wet hands.
zOtherwise, an electric shock may result.
Insert the power plug all the way in so it is not loose.
zAn unstable connection may cause a fire.
Connect the power plug to a grounded power socket (type 1 insulated devices
only).
zAn electric shock or injury may result.
Do not bend or pull the power cord with force. Do not weigh the power cord
down with a heavy object.
zA damaged power cord may cause an electric shock or fire.
Do not place the power cord or product near heat sources.
zAn electric shock or fire may result.
Remove foreign substances such as dust around the plug pins and power socket
with a dry cloth.
zOtherwise, a fire may result.
Before Using the Product
5
Before Using the Product
!
!
!
!
Caution
Do not unplug the power cord when the product is in use.
zThe product may become damaged by an electric shock.
Do not use the power cord for products other than authorized products supplied
by Samsung.
zAn electric shock or fire may result.
Keep the power socket where the power cord is connected unobstructed.
zIf any problem occurs in the product, unplug the power cable to completely
cut the power to the product.
Installation
Warning
Power to the product cannot be completely cut off with the power button.
Hold the plug when disconnecting the power cord from the power socket.
zAn electric shock or fire may result.
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP
OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
zOtherwise, a fire may result.
Avoid installing the product in a narrow space with bad ventilation, such as a
bookshelf or wall closet.
zOtherwise, a fire may result due to an increased internal temperature.
Keep the plastic packaging bag for the product in a place that cannot be reached
by children.
zChildren may suffocate.
Before Using the Product
6
Before Using the Product
!
!
Do not install the product on an unstable or vibrating surface (insecure shelf,
sloped surface, etc.).
zThe product may fall and break or cause a personal injury.
zUsing the product in an area with excess vibration may damage the product
or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture (water
drips, etc.), oil, or smoke.
zAn electric shock or fire may result.
Do not expose the product to direct sunlight, heat, or a hot object such as a
stove.
zOtherwise, the product lifespan may be reduced, or a fire may result.
Caution
Do not install the product within the reach of young children.
zThe product may fall and injure children.
Take care not to drop the product when moving it.
zOtherwise, product failure or personal injury may result.
Do not set down the product on its front.
zThe screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the bottom
edge of the front of the product is not protruding.
zThe product may fall and break or cause a personal injury.
zInstall the product only on cabinets or shelves of the right size.
Before Using the Product
7
Before Using the Product
!
SAMSUNG
!
!
!
Put down the product carefully.
zThe product may fall and break or cause a personal injury.
Installing the product in an unusual place (a place exposed to a lot of fine
particles, chemical substances or extreme temperatures, or an airport or train
station where the product should operate continuously for an extended period of
time) may seriously affect its performance.
zBe sure to consult Samsung Customer Service Center (page89) before
installation if you want to install the product at such a place.
Operation
Warning
High voltage runs through the product. Do not attempt to disassemble, repair, or
modify the product on your own.
zAn electric shock or fire may result.
Contact Samsung Customer Service Center (page89) for repair.
Before you move the product, be sure to turn off the power switch and remove all
the cables connected to the product, including the power cord and the antenna
cable.
zOtherwise, the power cord may be damaged and a fire or electric shock may
result.
If the product generates a strange noise, a burning smell, or smoke, remove the
power cord immediately and contact Samsung Customer Service Center
(page89).
zAn electric shock or fire may result.
Do not let children hang from the product or climb on top of it.
zThe product may fall, and your child may become injured or seriously
harmed.
If the product falls or the exterior is damaged, power off the product, remove the
power cord, and contact Samsung Customer Service Center (page89).
zOtherwise, an electric shock or fire may result.
Before Using the Product
8
Before Using the Product
!
!
!
GAS
!
Do not put a heavy object, toy, or sweets on top of the product.
zThe product or heavy objects may fall as children try to reach for the toy or
sweets resulting in a serious injury.
During a lightning or thunderstorm, remove the power cord and do not touch the
antenna cable.
zAn electric shock or fire may result.
Do not drop objects on the product or apply impact.
zAn electric shock or fire may result.
Do not move the product by pulling the power cord or any cable.
zOtherwise, the power cable may be damaged and product failure, an electric
shock or fire may result.
If a gas leakage is found, do not touch the product or power plug. Also, ventilate
the area immediately.
zSparks can cause an explosion or fire.
zDuring a lightning or thunderstorm, do not touch the power cord or antenna
cable.
Do not lift or move the product by the power cord or any cable.
zOtherwise, the power cable may be damaged and product failure, an electric
shock or fire may result.
Do not use or keep combustible spray or an inflammable substance near the
product.
zAn explosion or fire may result.
Ensure the vents are not blocked by tablecloths or curtains.
zOtherwise, a fire may result from an increased internal temperature.
Before Using the Product
9
Before Using the Product
100
!
-_-
!
!
Do not insert a metallic object (a chopstick, coin, hair pin, etc.) or inflammable
object (paper, match, etc.) into the vent or ports of the product.
zIf water or any foreign substance enters the product, be sure to power off the
product, remove the power cord, and contact Samsung Customer Service
Center (page89).
zProduct failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic
objects on top of the product.
zIf water or any foreign substance enters the product, be sure to power off the
product, remove the power cord, and contact Samsung Customer Service
Center (page89).
zProduct failure, an electric shock or fire may result.
Caution
Leaving the screen fixed on a stationary image for an extended period of time
may cause afterimage burn-in or defective pixels.
zIf you are not going to use the product for an extended period of time,
activate power-saving mode or a moving-picture screen saver.
Disconnect the power cord from the power socket if you do not plan on using the
product for an extended period of time (vacation, etc).
zOtherwise, a fire may result from accumulated dust, overheating, an electric
shock, or electric leakage.
Use the product at the recommended resolution and frequency.
zYour eyesight may deteriorate.
Do not put DC power adapters together.
zOtherwise, a fire may result.
Remove the plastic bag from the DC power adapter before you use it.
zOtherwise, a fire may result.
Before Using the Product
10
Before Using the Product
!
!
!
!
Do not let water enter the DC power device or get the device wet.
zAn electric shock or fire may result.
zAvoid using the product outdoors where it can be exposed to rain or snow.
zBe careful not to get the DC power adapter wet when you wash the floor.
Do not put the DC power adapter near to any heating apparatus.
zOtherwise, a fire may result.
Keep the DC power adapter in a well-ventilated area.
Looking at the screen too close for an extended period of time can deteriorate
your eyesight.
Do not hold the monitor upside-down or move it by holding the stand.
zThe product may fall and break or cause a personal injury.
Do not use humidifiers or stoves around the product.
zAn electric shock or fire may result.
Rest your eyes for more than 5 minutes for every 1 hour of product use.
zEye fatigue will be relieved.
Do not touch the screen when the product has been turned on for an extended
period of time as it will become hot.
Store the small accessories used with the product out of reach of children.
Before Using the Product
11
Before Using the Product
!
Exercise caution when adjusting the product angle or stand height.
zOtherwise, children's fingers or hands may become stuck and injured.
zTilting the product excessively may cause it to fall and result in personal
injury.
Do not place heavy objects on the product.
zProduct failure or personal injure may result.
Correct posture to use the product
Use the product in the correct posture as follows:
zStraighten your back.
zAllow a distance of 45 to 50cm between your eye and the screen, and look slightly
downward at the screen.
Keep your eyes directly in front of the screen.
zAdjust the angle so light does not reflect on the screen.
zKeep your forearms perpendicular to your upper arms and level with the back of
your hands.
zKeep your elbows at about a right angle.
zAdjust the height of the product so you can keep your knees bent at 90 degrees or
more, your heels attached to the floor, and your arms lower than your heart.
Before Using the Product
12
Table Of Contents
BEFORE USING THE
PRODUCT
PREPARATIONS18Checking the Contents
2Copyright
2Icons used in this manual
2Symbols for safety precautions
3Cleaning
3Cleaning
4Securing the Installation Space
4Precautions for storage
4Safety Precautions
4Electricity and Safety
6Installation
8Operation
12Correct posture to use the product
18Removing the Packaging
19Checking the Components
USING "CENTRAL
STATION"
21Parts
21Frontal Buttons
23Reverse Side
24Left Side View
25Right Side View
26Adjusting the Product Tilt and Height
27About "Central Station"
27Software Installation for Using "Central
Station"
27Installing "SAMSUNG Central Station Setup"
28Connecting the Product to a PC to Use
"Central Station"
29Connecting to a PC via Wireless USB
32Connecting to a PC via the USB Cable
33Utilizing "Central Station"
33Using the Product as a USB HUB
34Connecting to a LAN
Table Of Contents
13
Table Of Contents
35Configuring the Central Station Monitor
IP
35Dynamic IP
37Static IP
39Notice before your use of Wireless USB
or USB Mode
CONNECTING AND USING
A SOURCE DEVICE
SCREEN SETUP49MAGIC
40Before Connecting
40Pre-connection Checkpoints
41Connecting and Using a PC
41Connecting to a PC
43Driver Installation
44Setting Optimum Resolution
45Changing the Resolution Using a PC
48Connecting to a Video Device
48Connection Using an HDMI Cable
48Connecting Headphones
49SAMSUNG MAGIC Angle
50SAMSUNG MAGIC Bright
51Configuring SAMSUNG MAGIC Color
52Brightness
52Configuring Brightness
53Contrast
53Configuring Contrast
53Sharpness
53Configuring Sharpness
54Coarse
54Adjusting Coarse
55Fine
55Adjusting Fine
Table Of Contents
14
Table Of Contents
55Response Time
55Configuring Response Time
56HDMI Black Level
CONFIGURING TINT57Red
57Configuring Red
57Green
57Configuring Green
58Blue
58Configuring Blue
RESIZING OR
RELOCATING THE
SCREEN
59Color Tone
59Configuring the Color Tone Settings
60Gamma
60Configuring Gamma
61Auto Adjustment
61Configuring the Auto Adjustment Settings
61Size
61Changing the Picture Size
62Horizontal Position
62Configuring H-Position
63Vertical Position
63Configuring V-Position
64Menu H-Position
64Configuring Menu H-Position
65Menu V-Position
65Configuring Menu V-Position
Table Of Contents
15
Table Of Contents
SETUP AND RESET
66HUB
66Auto Wireless Detection
66Wireless Connection
67USB Connection
68Analog
68HDMI
69USB Super Charging
70Wireless ID
70Eco Saving
70Configuring Eco Saving
71Menu Transparency
71Changing Menu Transparency
71Language
71Changing the Language
72PC/AV Mode
72Configuring PC/AV Mode
INFORMATION MENU AND
OTHERS
73Auto Source
73Configuring Auto Source
73Display Time
73Configuring Display Time
74Key Repeat Time
74Configuring Key Repeat Time
75Off Timer On/Off
75Configuring Off Timer On/Off
75Off Timer Setting
75Configuring Off Timer Setting
76Reset
76Initializing Settings (Reset)
77INFORMATION
77Displaying INFORMATION
Table Of Contents
16
Table Of Contents
77Configuring Brightness in the Startup
Screen
78Configuring Volume in the Startup
Screen
79Configuring HUB in the Initial Screen
TROUBLESHOOTING
GUIDE
SPECIFICATIONS85General
APPENDIX89Contact SAMSUNG WORLDWIDE
80Requirements Before Contacting
Samsung Customer Service Center
80Testing the Product
80Checking the Resolution and Frequency
80Check the followings.
83Q & A
86PowerSaver
87Standard Signal Mode Table
88PC Dongle Specification (UWB : Ultra
Wide Band)
91Terminology
INDEX
Table Of Contents
17
Preparations
1
1.1Checking the Contents
1.1.1Removing the Packaging
1Open the packaging box. Be careful not to damage the product when you open the packaging with
a sharp instrument.
2Remove the Styrofoam from the product.
3Check the components and remove the Styrofoam and plastic bag.
zThe appearance of actual components may differ from the image shown.
zThis image is for reference only.
4Store the box in a dry area so that it can be used when moving the product in the future.
1 Preparations
18
1
Preparations
1.1.2Checking the Components
zContact the dealer from whom you purchased the product if any item is missing.
zThe appearance of the components and items sold separately may differ from the image shown.
Components
Quick Setup GuideWarranty Card
(Not available In some locations)
Wireless Connection DonglePower cableDC power adapter
USB 3.0 cableD-SUB cableHDMI cable (optionally)
User Manual
Cleaning clothUSB gender changer
zComponents may differ in different locations.
zThe cleaning cloth is only supplied with the black high-glossy model.
USB gender changer
When the wireless-connection dongle cannot connect to your notebook PC, connect it using the USB
gender changer.
1 Preparations
19
1
Preparations
Items sold separately
The following items can be purchased at your nearest retailer.
LAN cableHDMI-DVI cableUSB cable
1 Preparations
20
Preparations
1
1.2Parts
1.2.1Frontal Buttons
zThe color and shape of parts may differ from what is shown. Specifications are subject to change
zThis is a touch-type button. Tap the button lightly with a finger.
zThe printed board assembly (PBA) inside this product may heat the stand. A hot stand does not
without notice to improve quality.
indicate a problem with the product.
zIf the MENU button is not visible, lightly tap the area around the [] button. The MENU button will
become visible.
zThe onscreen display menu only appears when the MENU button light is lit.
zThe lit MENU button light will automatically turn off after 10 seconds.
1 Preparations
21
1
m
m
m
m
Preparations
IconsDescription
zOpen or close the onscreen display (OSD) menu, or return to the last
menu.
zOSD control lock: Maintain the current settings, or lock the OSD
control to prevent unintended changes to settings.
To lock the OSD control, press the MENU button [] for five
seconds.
To unlock the locked OSD control, press the MENU button [] for
more than five seconds.
The Brightness and Contrast can be adjusted and Information can be
viewed even when the OSD control is locked.
Open the HUB settings screen (see "HUB" in "7.1 HUB").
To hide the HUB screen, press the [] or [] button.
Turn the screen on or off.
The power indicator will be lit when the product is operating normally.
zRefer to "10.2 PowerSaver" for details about the power-saving
function.
zTo reduce power consumption, it is best to remove the power
cable when you will not be using the product for an extended
period of time.
Confirm a menu selection.
Pressing the [] button when the OSD menu is not displayed will
change the input source (Analog/HDMI/Wireless USB/USB). If you power
on the product or change the input source by pressing the [] button,
a message that shows the changed input source will appear at the top
left corner of the screen.
zThis function is not available with any product that supports an
Analog interface only.
zIf the [] button blinks abnormally, there may be a problem in
the operation of the fan inside the product. If the problem
persists for more than 10 minutes, consult your nearest
customer service center.
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
Move to the left or right menu or adjust the value for an option on the
OSD menu.
1 Preparations
22
1
Preparations
1.2.2Reverse Side
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
PortDescription
Connects to a PC using the D-SUB cable.
Connects to a network using the LAN cable.
Connects to a PC via a USB cable.
This port can only connect to a PC.
Connects to the DC power adapter.
1 Preparations
23
1
HDMI IN21
2
1
1
Preparations
1.2.3Left Side View
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
PortDescription
Connects to an audio output device such as headphones.
HDMI INConnects to a source device using an HDMI cable.
Connects to a source device via a USB cable. Compatible with a
USB cable version 3.0 or lower.
/
zThe USB 3.0 port is blue in color.
zIf 1 Port is selected for USB Super Charging, only the
[] port is enabled.
1 Preparations
24
1
Preparations
1.2.4Right Side View
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
PortDescription
Connects to a source device via a USB cable. Compatible with a
USB cable version 2.0 or lower.
The USB 2.0 port is black in color.
1 Preparations
25
1
100
52°
30
25°
52°
Preparations
1.2.5Adjusting the Product Tilt and Height
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
zThe monitor tilt and height can be adjusted.
zHold the top center of the product and adjust the tilt carefully.
1 Preparations
26
Using "Central Station"
2
You can use "Central Station" by connecting the product to a PC through the Wireless USB function or a USB
cable. "Central Station" system allows the product to function as a HUB so that you can connect a device
directly to the product to control the device from the product without having to connect the device to a PC.
2.1About "Central Station"
"Central Station" is a HUB system developed independently by Samsung and allows you to conveniently
control a notebook PC that has a small screen and a limited number of input/output ports available.
Notebook or netbook computers offer portability but may prove inconvenient when used at the office or
at home due to the limited number of functions available. Connecting a notebook PC to this product,
which has the "Central Station" function, allows you to view the small notebook PC screen on a larger
screen. With the HUB function, you can control multiple devices at the same time from the notebook PC,
even if the notebook PC has a limited number of input/output ports.
In particular, the high-tech Wireless USB feature allows you to connect a notebook PC to the product
wirelessly and, from the product, enjoy various multimedia contents stored on the notebook PC.
You can also use triple monitors by configuring the display settings.
2.2Software Installation for Using "Central Station"
Install on your PC the software provided with the product.
To maximize the performance of your Central Station monitor, visit www.samsung.com and upgrade the
driver periodically.
2.2.1Installing "SAMSUNG Central Station Setup"
This software is needed to use the Central Station function. Software installation may be affected by the
graphics card, motherboard, or network conditions of the PC.
1Insert the installation CD into the CD-ROM drive.
2Click the "SAMSUNG Central Station Setup" installation program.
3Follow the instructions given on the screen to proceed with installation.
If a software installation window does not appear in the main screen, install using the "SAMSUNG
Central Station Setup > CA750X_Central_Station.exe" execution file on the CD-ROM.
Select the country where you will use the product when installing the driver initially. Using the
product in a country other than the selected country would be contrary to the law.
2 Using "Central Station"
27
2
1
2
3
4
→
Using "Central Station"
4After installing the integrated PC driver "Samsung Central Station Setup," customize the audio
output port settings as required.
(Control Panel->Audio->Speaker->Speaker Setup)
z"SAMSUNG Central Station Setup" software consists of "Samsung Wireless Central Station" and
"Samsung Wireless Monitor". To delete the software, go to StartSettingsControl Panel
and double-click Add or Remove Programs on the PC. Select "Samsung Wireless Central Station"
and "Samsung Wireless Monitor" from the list and click Change/Remove.
→
2.3Connecting the Product to a PC to Use "Central Station"
Connect the product to a PC via Wireless USB and the USB cable.
Connecting the product and PC via Wireless USB and the USB cable will allow you to hear audio when
you plug headphones or speakers into [] on the product.
If a PC is connected, the product will automatically switch to the mode of the detected input source. If
several source devices are connected to the product, the input source will automatically change
2 Using "Central Station"
28
2
CSM
Using "Central Station"
according to this priority, from left to right: Analog mode > HDMI mode > Wireless USB mode > USB
mode.
If the product connects to a PC for the first time, the optimum resolution (1920 x 1080) will be selected
automatically and a message will appear confirming that you want to set the display to extended mode.
The same resolution will be applied from the next time the product connects to the PC.
When multiple display output ports on the PC are connected to the Central Station monitor, different
signals may output depending on the system specifications of the PC.
2.3.1Connecting to a PC via Wireless USB
To use the Wireless USB function, the wireless-connection dongle provided (as a component) should be
connected to the USB port on the PC. The wireless-connection dongle allows a wireless connection
between the product and a PC. The dongle connected to a PC should point at the product to maximize
signal reception.
Wireless communication can be affected by the surrounding environmental conditions. Do not place an
object, or obstacle, between the monitor and PC. The object can affect the sensitivity of the signal
transmission/reception.
zEnsure you install the Central Station monitor at the same height as the transmitter (dongle) on the
PC.
2 Using "Central Station"
29
Loading...
+ 65 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.