Samsung BD-P1580, BD-P1595, BD-P1595A, BD-P1600A, BD-P1620A Service Manual

...

Blu-Ray Disc Player

Chassis : MONDRIAN

BASIC : BD-P1600A / Application Models:

BD-P1580 / BD-P1595 /

BD-P1595A / BD-P1600A / BD-P1620A / BD-P1650A

If you want to know additional information which is not includ-

ed on this Service Manual, Please refer to the SKP(Samsung Knowledge Portal) web site.

Area Web Site

North America URL ; http://service.samsungportal.com

Latin America URL ; http://latin.samsungportal.com

CIS URL ; http://cis.samsungportal.com

Europe URL ; http://europe.samsungportal.com

China URL ; http://china.samsungportal.com

Asia URL ; http://asia.samsungportal.com

Mideast & Africa URL ; http://mea.samsungportal.com

SERVICE MANUAL BD-P1580 /BD-P1595A /BD-P1600A /BD-P1620A /BD-P1650A /BD-1595

Application Area:

ADL, EDC, HAC, MEA, NWT, SAM, TSE, UMG, XEC, XEE, XEF, XEG, XER, XEU, XFA, XME, XSA, XSE, XSS, XTL

Manual

SERVICE

 •Inappearance,thereisnodifferencebetweenBD-P1600andBD-P1600AbecausetwomodelshavethesameAss’yFrontCabinet.

WecanidentifyBD-P1600fromBD-P1600AbythemodelnameofLabel-RatingonChassis-Rear. HowtoidentifythembyLabel-Rating;Seenextpage. Whenservicing,besuretoconfirmthemodelnameonLabel-RatingofChassis-Rear.

Blu-Ray Disc Player Contents

1. Precautions

2. Product Specification

3. Disassembly and Reassembly

BD-P1600A / BD-P1620A / BD-P1650A /

BD-P1595A / BD-P1595

4. Trouble Shooting

5. Exploded View and Parts List

6. PCB Diagrams

This Service Manual is a property of Samsung Electronics Co .,Ltd. Any unauthorized use of Manual can be punished under applicable

International and/or domestic law.

Printed in Korea

7. Schematic Diagrams

BD-P1580

How to identify BD-P1600A From BD-P1600

LABEL RATING

LABEL BAR CODE

LABEL RATING

LABEL BAR CODE

BD-P1600

XAA

AC 120V ~ 60Hz 30W

MANUFACTURED : 2009.01

S/N:ZARW6VAS100001R

M/C : BD-P1600/XAA

BD-P1600/XAA BD-P1600

6VAS100001 M/C:ZAPU

XAA

BD-P1600A/XAA

BD-P1600

6VAS200001 M/C:ZARW

XAA

BD-P1600

XAA

AC 120V ~ 60Hz 30W

MANUFACTURED : 2009.02

S/N:ZARW6VAS200001R

M/C : BD-P1600A/XAA

BD-P1600

BD-P1600A

CONTENTS CONTENTS

1. Precautions 1-1 ~ 1-7

1-1 Safety Precautions (1-2) 1-2 Servicing Precautions (1-4) 1-3 ESD Precautions (1-5) 1-4 Handling the optical pick-up (1-6)

2. Product Specication 2-1 ~ 2-9

2-1 Product Specication (2-1)

2-2 Chassis Product Specication (2-7) 2-3 Option Product Specication (2-8)

3. Disassembly and Reassembly 3-1 ~ 3-21

3-1 Cabinet and PCB (BD-P1600A) (3-2) 3-2 Cabinet and PCB (BD-P1580) (3-8) 3-3 PCB Location (3-14) 3-4 Deck (3-15)

4. Trouble Shooting 4-1 ~ 4-33

4-1 Trouble Shooting (4-2) 4-2 Adjustment (4-25) 4-3 Software Update (4-28)

5. Exploded View and Parts List 5-1 ~ 5-26

5-1 Cabinet Assembly (BD-P1600A) (5-2) 5-2 Cabinet Assembly (BD-P1580) (5-4) 5-3 Deck Parts (5-6) 5-4 Electrical Parts List (BD-P1600A) (5-8) 5-5 Electrical Parts List (BD-P1580) (5-17)

6-7 Touch Key PCB (BD-P1580) (6-11)

7. Schematic Diagrams 7-1 ~ 7-24

7-1 All block Diagram (7-2) 7-2 Power (7-3) 7-3 S.M.P.S (S.M.P.S PCB) (7-5) 7-4 Main Power (Main PCB) (7-6) 7-5 DDR2 BANK0 (Main PCB) (7-7) 7-6 DDR2 BANK1 (Main PCB) (7-8) 7-7 PCI, EBI, Flash Memory (Main PCB) (7-9) 7-8 Clock, BBS (Main PCB) (7-10) 7-9 VDAC, Audio L/R, SPDIF (Main PCB) (7-11) 7-10 HDMI (Main PCB) (7-13) 7-11 Ethernet, USB, S-ATA (Main PCB)(BD-P1600A) (7-14) 7-12 Ethernet, USB, S-ATA (Main PCB)(BD-P1580) (7-15) 7-13 GPIO Block, Reset (Main PCB) (7-16) 7-14 Boot Strap Option (Main PCB) (7-17) 7-15 Power, Decoupling (Main PCB) (7-18) 7-16 Front Micom (Main PCB) (7-19) 7-17 BCM7620 (F/E)(Main PCB) (7-20) 7-18 Flash (MLC)(Main PCB) (7-21) 7-19 Front Key (Front PCB) (7-22) 7-20 Touch Key PCB (Touch PCB) (7-23)

6. PCB Diagrams 6-1 ~ 6-12

6-1 Wiring Diagram (6-2) 6-2 Main PCB (6-3) 6-3 S.M.P.S PCB (6-6) 6-4 Front key PCB (BD-P1600A) (6-8) 6-5 Front key PCB (BD-P1580) (6-9) 6-6 Touch Key PCB (BD-P1600A) (6-10)

Product Specication

2. Product Specication

2-1 Product Specication ------------------------------------------------------------------------- 2-2

2-2 Chassis Product Specication ---------------------------------------------------------- 2-7

2-3 Option Product Specication ------------------------------------------------------------ 2-8

Samsung Electronics 2-1

1. Precautions

1-1 Safety Precautions ----------------------------------------------------------------------------- 1-2

1-2 Servicing Precautions ------------------------------------------------------------------------ 1-4

1-3 ESD Precautions --------------------------------------------------------------------------------- 1-5

1-4 Handling the optical pick-up ------------------------------------------------------------- 1-6

Precautions

Samsung Electronics 1-1

Precautions

1-2 Samsung Electronics

1-1 Safety Precautions

1) Before returning an instrument to the customer, always make a safety check of the entire instrument, including, but not limited to, the following items:

(1) Be sure that no built-in protective devices are defective or have been defeated during servicing. (1)Protective shields are provided to protect both the technician and the customer. Correctly replace all missing protective shields, including any removed for servicing convenience. (2)When reinstalling the chassis and/or other assembly in the cabinet, be sure to put back in place all protective devices, including, but not limited to, nonmetallic control knobs, insulating fish papers, adjustment and compartment covers/shields, and isolation resistor/capacitor networks. Do not operate this instrument or permit it to be operated without all protective devices correctly installed and functioning.

(2) Be sure that there are no cabinet openings through which adults or children might be able to insert their fingers and contact a hazardous voltage. Such openings include, but are not limited to, excessively wide cabinet ventilation slots, and an improperly fitted and/or incorrectly secured cabinet back cover.

(3) Leakage Current Hot Check-With the instrument completely reassembled, plug the AC line cord directly into a 230V(220V ~ 240V) AC outlet. (Do not use an isolation transformer during this test.) Use a leakage current tester or a metering system that complies with American National Standardsp institute (ANSI) C101.1 Leakage Current for Appliances and Underwriters Laboratories (UL) 1270 (40.7). With the instrument’s AC switch first in the ON position and then in the OFF position, measure from a known earth ground (metal water pipe, conduit, etc.) to all exposed metal parts of the instrument (antennas, handle brackets, metal cabinets, screwheads, metallic overlays, control shafts, etc.), especially any exposed metal parts that offer an electrical return path to the chassis. Any current measured must not exceed 0.5mA. Reverse the instrument power cord plug in the outlet and repeat the test. See Fig. 1-1.

Any measurements not within the limits specified herein indicate a potential shock hazard that must be eliminated before returning the instrument to the customer.

Fig. 1-1 AC Leakage Test

(4) Insulation Resistance Test Cold Check-(1) Unplug the power supply cord and connect a jumper wire between the two prongs of the plug. (2) Turn on the power switch of the instrument. (3) Measure the resistance with an ohmmeter between the jumpered AC plug and all exposed metallic cabinet parts on the instrument, such as screwheads, antenna, control shafts, handle brackets, etc. When an exposed metallic part has a return path to the chassis, the reading should be between 1 and 5.2 megohm. When there is no return path to the chassis, the reading must be infinite. If the reading is not within the limits specified, there is the possibility of a shock hazard, and the instrument must be repaired and rechecked before it is returned to the customer. See Fig. 1-2.

Fig. 1-2 Insulation Resistance Test

Samsung electronics 1-2

Samsung Electronics 1-3

Precautions

2) Read and comply with all caution and safety related notes on or inside the cabinet, or on the chassis.

3) Design Alteration Warning-Do not alter or add to the mechanical or electrical design of this instrument. Design alterations and additions, including

 butnotlimitedto,circuitmodicationsandthe

addition of items such as auxiliary audio output connections, might alter the safety characteristics of this instrument and create a hazard to the user. Any design alterations or additions will make you, the servicer, responsible for personal injury or property damage resulting therefrom.

4) Observe original lead dress. Take extra care to assure correct lead dress in the following areas: (1) near sharp edges, (2) near thermally hot parts (be sure that leads and components do not touch thermally hot parts), (3) the AC supply, (4) high voltage, and (5) antenna wiring. Always inspect in all areas for pinched, out-of-place, or frayed wiring, Do not change spacing between a component and the printed-circuit board. Check the AC power cord for damage.

5) Components, parts, and/or wiring that appear to have overheated or that are otherwise damaged should be replaced with components, parts and/ or

 wiringthatmeetoriginalspecications.

Additionally, determine the cause of overheating and/or damage and, if necessary, take corrective action to remove any potential safety hazard.

6) Product Safety Notice-Some electrical and mechanical parts have special safety-related characteristics which are often not evident from visual inspection, nor can the protection they give necessarily be obtained by replacing them with components rated for higher voltage, wattage, etc. Parts that have

 specialsafetycharacteristicsareidentiedby

shading, an ( )or a ( )on schematics and parts lists. Use of a substitute replacement that does not have the same safety characteristics as the recommended

 replacementpartmightcreateshock,reand/or

other hazards. Product safety is under review continuously and new instructions are issued whenever appropriate.

Precautions

1-4 Samsung Electronics

1-2 Servicing Precautions

CAUTION : Before servicing units covered by this

service manual and its supplements, read and follow the Safety Precautions section of this manual.

Note:Ifunforseencircumstancescreateconict

between the following servicing precautions and any of the safety precautions, always follow the safety precautions. Remember: Safety First.

1-2-1 General Servicing Precautions

(1) a. Always unplug the instrument’s AC powercord from the AC power source before (1) re-moving or reinstalling any component, circuit board, module or any other instrument assembly, (2) disconnecting any instrument electrical plug or other electrical connection, (3) connecting a test substitute in parallel with an electrolytic ca pacitor in the instrument.

b. Do not defeat any plug/socket B+ voltage interlocks with which instruments covered by this service manual might be equipped.

c. Do not apply AC power to this instrument and /or any of its electrical assemblies unless all solid-state device heat sinks are correctly installed.

d. Always connect a test instrument’s ground lead to the instrument chassis ground before connecting the test instrument positive lead. Always remove the test instrument ground lead last.

(4) An insulation tube or tape is sometimes used and some components are raised above the printed wiring board for safety. The internal wiring is sometimes clamped to prevent contact with heating components. Install such elements as they were.

(5) After servicing, always check that the removed screws, components, and wiring have been installed correctly and that the portion around the serviced part has not been damaged and so on. Further, check the insulation between the blades of the attachment plug and accessible conductive parts.

1-2-2 Insulation Checking Procedure

Disconnect the attachment plug from the AC outlet and turn the power ON. Connect the insulation resistance meter (500V) to the blades of the attachment plug. The insulation resistance between each blade of the attachment plug and accessible conductive parts(see note) should be more than 1 Megohm.

Note : Accessible conductive parts include metal panels, input terminals, earphone jacks, etc.

Note : Refer to the Safety Precautions section ground lead last.

(2) The service precautions are indicated or printed on the cabinet, chassis or components. When servicing, follow the printed or indicated service precautions and service materials.

(3)Thecomponentsusedintheunithaveaspecied  ameresistanceanddielectricstrength.

When replacing components, use components

 whichhavethesameratings.Componentsidentied

by shading, by( ) or by ( ) in the circuit diagram are important for safety or for the characteristics of the unit. Always replace them with the exact replacement components.

Samsung Electronics 1-5

Precautions

1-3 ESD Precautions

Electrostatically Sensitive Devices (ESD)

Some semiconductor (solid state) devices can be damagedeasily by static electricity. Such components commonly are called Electrostatically Sensitive Devices(ESD). Examples of typical ESD

devicesareintegratedcircuitsandsomeeld-effect

transistors and semiconductor chip components. The following techniques should be used to help reduce the incidence of component damage caused by static electricity.

(1) Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any electrostatic charge on your body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging wrist strap device, which should be removed for potential shock reasons prior to applying power to the unit under test.

CAUTION : Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.

(8) Minimize bodily motions when handling unpackaged replacement ESD devices. (Otherwise harmless motion such as the brushing together of your clothes fabric or the lifting of your foot from a

 carpetedoorcangeneratestaticelectricity  sufcienttodamageanESDdevice).

(2) After removing an electrical assembly equipped with ESD devices, place the assembly on a conductive surface such as aluminum foil, to prevent electrostatic charge buildup or exposure of the assembly.

(3) Use only a grounded-tip soldering iron to solder or unsolder ESD devices.

(4) Use only an anti-static solder removal devices.

 Somesolderremovaldevicesnotclassiedas  “anti-static”cangenerateelectricalchargessuf

cient to damage ESD devices.

(5) Do not use freon-propelled chemicals. These can

 generateelectricalchargessufcienttodamage

ESD devices.

(6) Do not remove a replacement ESD device from its protective package until immediately before your are ready to install it.(Most replacement ESD devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or comparable conductive materials).

(7) Immediately before removing the protective materials from the leads of a replacement ESD device, touch the protective material to the chassis or circuit assembly into which the device will be installed.

Precautions

1-6 Samsung Electronics

1-4 Handling the optical pick-up

The laser diode in the optical pick up may suffer electrostatic breakdown because of potential static electricity from clothing and your body.

The following method is recommended. (1) Place a conductive sheet on the work bench (The black sheet used for wrapping repair parts.)

(2) Place the set on the conductive sheet so that the chassis is grounded to the sheet.

(3) Place your hands on the conductive sheet(This gives them the same ground as the sheet.)

(4) Remove the optical pick up block

(5) Perform work on top of the conductive sheet. Be careful not to let your clothes or any other static sources to touch the unit.

u Be sure to put on a wrist strap grounded to the sheet. u Be sure to lay a conductive sheet made of copper etc. Which is grounded to the table.

Fig.1-3

(6) Short the short terminal on the PCB, which is inside the Pick-Up ASS’Y, before replacing the Pick Up. (The short terminal is shorted when the Pick Up Ass’y is being lifted or moved.)

(7) After replacing the Pick-up, open the short terminal on the PCB.

Samsung Electronics 1-7

Precautions

M E M O

Product Specication

2-2 Samsung Electronics

2-1 Product Specication

Power requirements AC 110~240V, 50/60Hz

Power consumption 30 W

General

Disc

Video

Output

Video/Audio HDMI

Audio

Output

Weight 2.2kg

Dimensions 430(W) × 199(D) × 54 (H) mm

Operating Temperature Range +5°C to +35°C

Operating Humidity Range 10 % to 75 %

BD (Blu-ray Disc) Reading Speed : 4.917m/sec

DVD (Digital Versatile Disc)

CD : 12 cm (COMPACT DISC)

CD : 8 cm (COMPACT DISC)

Composite Video

Component Video

2 Channel L(1/L), R(2/R)

Digital Audio Output

*Frequency Response

*S/N Ratio 110 dB

*Dynamic Range 100 dB

*Total Harmonic Distortion

Reading Speed : 3.49 ~ 4.06 m/sec.

Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.

Reading Speed : 4.8 ~ 5.6 m/sec.

Maximum Play Time : 74 min.

Reading Speed : 4.8 ~ 5.6 m/sec.

Maximum Play Time : 20 min.

1 channel : 1.0 Vp-p (75 Ω load)

Blu-ray/DVD Disc : 576i/480i

Y : 1.0 Vp-p (75 Ω load)

Pr : 0.70 Vp-p (75 Ω load)

Pb : 0.70 Vp-p (75 Ω load)

Blu-ray Disc : 1080i, 720p, 576p/480p, 576i/480i DVD : 576p/480p, 576i/480i

1080p, 1080i, 720p, 576p/480p

PCM multichannel audio, Bitstream audio

Optical

48 kHz Sampling : 4 Hz to 22 kHz

96 kHz Sampling : 4 Hz to 44 kHz

0.003%

Samsung Electronics 2-2

Samsung Electronics 2-3

Product Specication

2-1-1 Player Features

 qSupports a Variety of Disc Types

  -Blu-ray(BD-ROM,BD-RE,BD-R),DVDVideo,DVD-RW/-R(Vmodeandnalizedonly)

discs and Audio CD.

  -CD-RW/CD-R,DVD-RW/-RandUSBstoragedevicecontentsuchasMP3,JPEGandDivXles.

 qHDMI(HighDenitionMultimediaInterface)

HDMI reduces picture noise by allowing a pure digital video/audio signal path from the player to your TV.

 qDivX

  DivX®isadigitalvideoformatcreatedbyDivX,Inc.ThisplayerisanofcialDivXcertied

device that plays DivX video.

2-1-2 Blu-ray Disc Features

Blu-ray Discs support the highest quality HD video available in the industry - Large capacity means no

compromiseonvideoquality.Furthermore,aBlu-rayDischasthesamefamiliarsizeandlookasaDVD.

* The following Blu-ray Disc features are disc dependant and will vary. Appearance and navigation of features will also vary from disc to disc. Not all discs will have the features described below.

 qVideo highlights The BD-ROM format for movie distribution supports three highly advanced video codecs, including AVC, VC-1, and MPEG-2. HD video resolutions are also available:

  -1920x1080HighDenition   -1280x720HighDenition

 qForHigh-DenitionPlayback   Toviewhigh-denitioncontentsinBDdiscs,anHDTV(HighDenitionTelevision)isrequired.Somediscs    mayrequireusingtheplayer'sHDMIOUTtoviewhigh-Denitioncontent.Theabilitytoview   high-DenitioncontentonBDdiscsmaybelimiteddependingontheresolutionofyourTV.

 qGraphic planes Two individual, full HD resolution (1920x1080) video layers are available, on top of the HD video layer.

  Onelayerisassignedtovideo-relatedgraphics(likesubtitles),andtheotherlayerisassignedtointeractive

elements, such as buttons or menus. Various wipes, fades and scroll effects may be available on both layers.

 qMenu graphics Support full colour resolution graphics and animation, thereby greatly surpassing the capabilities of DVD-Video.

  UnlikeDVD,Menuscanbeaccessedduringvideoplayback.

 qMenu sounds

  WhenyouhighlightorselectamenuoptiononaBlu-raydisc,soundscanbeheardsuchasbuttonclicksora 

voiceover explaining the highlighted menu choice.

 qMulti-page/PopUp Menus

  WithDVD-Video,playbackisinterruptedeachtimeanewmenuscreenisaccessed.DuetoBlu-rayDisc's   abilitytopreloaddatafromthediscwithoutinterruptingplayback,amenumayconsistofseveralpages.

You can browse through the menu pages or select different menu paths, while the audio and video remain

  playinginthebackground.

 qInteractivity Certain Blu-ray Discs may contain Animated menus and Trivia games.

 qUser Browsable Slideshows With Blu-ray Discs, you can browse through various still pictures while the audio remains playing.

Product Specication

2-4 Samsung Electronics

 qSubtitles

  DependingonwhatiscontainedontheBlu-rayDisc,youmaybeabletoselectdifferentfontstyles,sizesand

colors for the subtitles, Subtitles may also be animated, scrolled or faded in and out.

 qBD-LIVE

  YoucanuseaBlu-rayDiscsupportingBD-LIVEthroughnetworkconnectionto

enjoy various contents provided by the disc manufacturer.

2-1-3 Disc types and formats that can be played

Disc Types Recorded content Disc Shape Max. Playing minute

BD-ROM, BD-R, BD-RE AUDIO + VIDEO Single sided (25GB/50GB) –

Single sided(5 inches) 240

DVD-VIDEO AUDIO + VIDEO

AUDIO-CD AUDIO

Double sided(5 inches) 480

Single sided(3 1/2 inches) 80

Double sided(3 1/2 inches) 160

Single sided(5 inches) 74

Single sided(3 1/2 inches) 20

DVD-RW(V mode and  nalized only) AUDIO + VIDEO 5 inches (4.7GB) 480(EX : Extended Play)

DVD-R(V mode and  nalized only) AUDIO + VIDEO 5 inches (4.7GB) 480(EX : Extended Play)

CD-R/-RW DVD-RW/-R JPEG MP3 – –

Blu-ray Disc Read Only Memory. A BD-ROM disc contains pre-recorded data. Although a BD-ROM may contain any

BD-ROM

DVD-Video

AUDIO-CD

DVD-RW(V mode

and  nalized only)

DVD-R(V mode

and  nalized only)

CD-R/-RW DVD-

RW/-R

form of data, most BD-ROM discs will contain movies in High Denition format, for playback on Blu-ray disc players.

This unit can play back pre-recorded commercial BD-ROM discs.

A digital versatile disc (DVD) can contain up to 135-minutes of images, 8 audio languages and 32 subtitle languages. It is equipped with MPEG-2 picture compression and Dolby Digital surround, allowing you to enjoy vivid and clear theatre quality images.

When switching from the  rst layer to the second layer of a dual-layered DVD Video disc, there may be momentary

distortion in the image and sound. This is not a malfunction of the unit. Once a DVD-RW/-R recorded in Video Mode

is  nalized, it becomes DVD-Video. Pre-recorded (prestamped)

commercial DVDs with movies are also referred to as DVD-Videos. This unit can play back pre-recorded commercial DVD discs (DVD-Video discs) with movies.

An audio disc on which 44.1kHz PCM Audio is recorded. This unit can play back CD-DA format audio CD-R and CD-RW discs. The unit may not be able to play some CD-R or CD-RW discs due to the condition of the recording.

Use a 700MB(80 minutes) CD-R/-RW disc. If possible, do not use a 800MB(90 minutes) or above disc, as the disc may not play back. If the CD-R/-RW disc was not recorded as a closed session, you may experience a delay in the early

playback time, all recorded  les may not play.

Some CD-R/-RW discs may not be playable with this unit, depending on the device which was used to burn them. For contents recorded on CD-R/-RW media from CDs for your personal use, playability may vary depending on contents and discs.

Once a DVD-R recorded in Video Mode is  nalized, it becomes DVD-Video. This unit can play back DVD-R discs recorded and  nalized with a Samsung DVD video recorder. It may not be able

to play some DVD-R discs depending on the disc and the condition of the recording.

Playback can be performed with DVD-RW discs in the Video Mode and  nalized only. Once a DVD-RW recorded in Video Mode is  nalized, it becomes DVD-Video. Ability to play back may depend on

recording conditions

Samsung Electronics 2-5

Product Specication

 qDVD-RW/-R (V)

- This is a format that is used for recording data on a DVD-RW or DVD-R disc. The disc can be

   playedbythisBlu-rayDiscPlayeronceithasbeennalized.

 qDivX

- CD-R/-RW, DVD-R/-RW

- Video Files with following extensions can be played. : .avi, .divx, .AVI, .DIVX

- DivX Video (Codec) Format : DivX 3.11 DivX 4.x DivX 5.x (without QPEL and GMC)

- DivX Audio (Codec) Format : MP3, MPEG1 Audio Layer 2, AC3, DTS

  -Supportedsubtitleleformats:.smi,.srt,.sub,.psb,.txt,.ass

- Maximum resolution : 720x480@30fps 720x576@25fps

- Minimum resolution : 16x16

- Maximum frame rate for progressive source : 30 frames per second

  -Maximuneldrateforinterlacesource:60eldspersecond   -Youcannotplaybackthediscthatislargerthana720x576pixelresolution.

 qAVCHD(AdvancedVideoCodecHighDenition)   -ThisplayercanplaybackAVCHDformatdiscs.Thesediscsarenormallyrecordedandusedincamcorders.   -TheAVCHDformatisahighdenitiondigitalvideocameraformat.   -TheMPEG-4AVC/H.264formatiscapableofcompressingimagesathigherefciencythanthat

of the conventional image compressing format.

- Some AVCHD discs use the "x.v.Color" format.

  -ThisplayercanplaybackAVCHDdiscsusing"x.v.Color"format.   -"x.v.Color"isatrademarkofSonyCorporation.   -"AVCHD"andtheAVCHDlogoaretrademarksofMatsushitaElectronicIndustrialCo.,Ltd.

and Sony Corporation.

CAUTION : - Some AVCHD format discs may not play, depending on the recording condition. AVCHD format discs need to be nalized.

- "x.v.Color" offers a wider color range than normal DVD camcorder discs.

- Some DivX format discs may not play, depending on the video resolution and frame rate condition.

Product Specication

2-6 Samsung Electronics

2-1-4 Discs that cannot be played

 qBlu-ray Discs with a region code other than "Sales region".  qHD DVD Disc  qDVD-Video with a region number other than "Sales region" or "ALL"  qDVD-RAM  q3.9 GB DVD-R Disc for Authoring.  qDVD-RW(VR mode)  qDVD-ROM/PD/MV-Disc, etc  qCVD/CD-ROM/CDV/CD-G/CD-I/LD

[Note]  qSome commercial discs and DVD discs purchased outside your region may not be playable with this

  product.Whenthesediscsareplayed,either"Nodisc."or"Pleasechecktheregionalcodeofthedisc."

will be displayed.  qIf a DVD-R/-RW disc has not been recorded properly in DVD video format, it will not be playable.

2-1-5 Region code

Both the Blu-ray disc player and the discs are coded by region. These regional codes must match in order to play the disc. If the codes do not match, the disc will not play. The Region Number for this Blu-ray disc player is described on the rear panel of the Blu-ray disc player.

BD Region Code Area

B Europe, Greenland, French territories, Middle East, Africa, Australia and New Zealand.

C India, China, Russia, Central and South Asia.

DVD Region Code Area

Region 1 The United States and its territories, canada

Region 2 Europe, Japan, Greenland, Egypt, South Africa, The Middle East

Region 3 Taiwan, Hongkong, Korea, South East Asia

Region 4 Mexico, Sout America, Australia, New Zealand

Region 5 Russia, Eastern Europe, India, Africa

Region 6 China

Region 0 Worldwide (all code)

North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia.

2-1-6 Blu-ray Disc Compatibility

Blu-ray Disc is a new and evolving format. Accordingly, disc compatibility issues are possible. Not all discs

arecompatibleandnoteverydiscwillplayback.Foradditionalinformation,refertotheComplianceand

Compatibility Notice section of this Manual. If you encounter compatibility problems, please contact the SAMSUNG customer care center. This Samsung Blu-ray disc player supports only the

BDROMProle2(a.k.a.BD-LIVE).Ifyouwanttoplaylaterversiondiscs,youmayneedtoupdate player'srmware.Pleaserefertohttp://www.samsung.comorcontactSAMSUNGcustomercarecenterat

1-800 SAMSUNG.

Samsung Electronics 2-7

Product Specication

2-2 Chassis Product Specication

General Features BD-P1400 BD-P1500 BD-P1600A / BD-P1580

Chassis

Input / Ouput

Audio/Video

Decoder

Loader

A/V Play-

able Media

Miscellaneous

BD-P1600A

BD-P1580

CVBS Output 1CH 1CH 1CH

S-Video Output 1CH 1CH -

YPbPr Output 1CH 1CH 1CH

HDMI O O O

Digital Audio Output(Optical/Coaxial) O/O O/X O/X

Analog Audio Output (2ch/5.1ch) 2ch/5.1ch 2ch 2ch

HDMI CEC O O O

Video Decoder(Maker : DAC) SMP8634 BCM7440 BCM7601

Video DAC 10bit 10bit 10bit

Audio DAC 24bit 192kHz 24bit 192kHz 24bit 192kHz

BD-ROM O O O

BD-RE / BD-R X O O

DVD-RAM X X X

DVD-RW O O O

DVD-ROM O O O

DVD-R O O O

DVD+R X X X

DVD+RW X X X

CD-ROM O O O

CD-R O O O

CD-RW O O O

BD-ROM O O O

BD-RE / BD-R X O O

DVD-Video O O O

DVD-Audio X X X

DVD-VR X X X

Not nalized DVD-V Mode X X X

VCD 1.1/2.0 X X X

SVCD/CVD X X X

CD-DA O O O

DTS CD O O O

HDCD X X X

SACD X X X

SACD CD Layer O O O

Picture CD O O O

mp3 O X O

JPG O X O

DivX X X O

Front Display VFD VFD VFD

Screen capture X X X

Closed Caption pass through from disc O O O

Main Menu (including Setup Menu) O O O

Product Specication

2-8 Samsung Electronics

A-B

1 2 3

7 8 9

4 5 6

RETURN

POWER

OPEN/CLOSE

AUDIO SUBTITLE REPEAT REPEAT

CANCEL

TV INPUT SEL

STOP PLAY

BONUSVIEW PAUSE

TV MUTE

ENTER

POPUP MENUDISC MENU

TITLE MENU

A B C D

EXIT

INFO

TV VOL TV CH

POWER

2-3 Option Product Specication

Description Fig Description Parts No Remark

Remote Control AK59-00104K

Batteries for Remote Control AC43-12002H

Instruction Manual AK68-01783A

Quick Guide AK68-01784A

Model Standard of

BD-P1580/XEU

Model Standard of

BD-P1580/XEU

S.N.A

Model Standard of

BD-P1580/XEU

Model Standard of

BD-P1580/XEU

S.N.A

Video/L/R Cable AC39-42001R

Model Standard of

BD-P1580/XEU

Samsung Electronics 2-9

Product Specication

M E M O

Disassembly and Reassembly

3. Disassembly and Reassembly

3-1 Cabinet and PCB (BD-P1600A) ----------------------------------------------------------- 3-2

3-2 Cabinet and PCB (BD-P1580) ------------------------------------------------------------- 3-8

3-3 PCB Location ------------------------------------------------------------------------------------- 3-14

3-4 Deck --------------------------------------------------------------------------------------------------- 3-15

Samsung Electronics 3-1

Disassembly and Reassembly

3-2 Samsung Electronics

3-1 Cabinet and PCB (BD-P1600A)

CAUTION : Connector Must be remove with care

3-1-1 Top Cabinet Removal

1) Remove 5 Screws q, w.

2) Li up the Top Cabinet e in direction of arrow.

q 3 SCREWS

(3X10 B)

Fig. 3-1 Top Cabinet Removal

e TOP CABINET

w 2 SCREWS

(3X10 B)

Samsung Electronics 3-2

Samsung Electronics 3-3

Disassembly and Reassembly

3-1-2 Ass'y Front-Cabinet Removal

1) Release 7 Hooks q, w, e, r and Ass'y Front-Cabinet t.

q 1 HOOK

r 2 HOOKS

e 3 HOOKS

w 1 HOOK

t ASS'Y FRONT-CABINET

Fig. 3-2 Ass'y Front-Cabinet Removal

Disassembly and Reassembly

3-4 Samsung Electronics

3-1-3 Ass'y Deck Removal

1) Remove 4 Screws q from the Ass'y Deck w and li it up.

q 4 SCREWS

(3X10 W)

w ASS'Y DECK

Fig. 3-3 Ass'y Deck Removal

Samsung Electronics 3-5

Disassembly and Reassembly

3-1-4 S.M.P.S PCB Removal

1) Remove 3 Screws q from the S.M.P.S PCB w and li it up.

q 3 SCREWS

(3X8 W)

w S.M.P.S PCB

Fig. 3-4 S.M.P.S PCB Removal

Disassembly and Reassembly

3-6 Samsung Electronics

3-1-5 Main PCB Removal

1) Remove 4 Screws qfrom the Main PCB w and li it up.

q 4 SCREWS

(3X6 W)

w MAIN PCB

Fig. 3-5 Main PCB Removal

Samsung Electronics 3-7

Disassembly and Reassembly

3-1-6 FAN Removal

1) Remove 2 Screws q from the Fan w and li it up..

w FAN

q 2 SCREWS

(3X10 B)

Fig. 3-6 FAN Removal

Disassembly and Reassembly

3-8 Samsung Electronics

3-2 Cabinet and PCB (BD-P1580)

CAUTION : Connector Must be remove with care

3-2-1 Top Cabinet Removal

1) Remove 5 Screws q, w.

2) Li up the Top Cabinet

e in direction of arrow.

q 3 SCREWS

(3X10 B)

Fig. 3-7 Top Cabinet Removal

e TOP CABINET

w 2 SCREWS

(3X10 B)

Samsung Electronics 3-9

Disassembly and Reassembly

3-2-2 Ass'y Front-Cabinet Removal

1) Release 7 Hooks q, w, e, r and Ass'y Front-Cabinet t.

q 1 HOOK

r 2 HOOKS

e 3 HOOKS

w 1 HOOK

t ASS'Y FRONT-CABINET

Fig. 3-8 Ass'y Front-Cabinet Removal

Disassembly and Reassembly

3-10 Samsung Electronics

3-2-3 Ass'y Deck Removal

1) Remove 4 Screws q from the Ass'y Deck w and li it up.

q 4 SCREWS

(3X10 W)

w ASS'Y DECK

Fig. 3-9 Ass'y Deck Removal

Samsung Electronics 3-11

Disassembly and Reassembly

3-2-4 S.M.P.S PCB Removal

1) Remove 3 Screws q from the S.M.P.S PCB w and li it up.

q 3 SCREWS

(3X8 W)

w S.M.P.S PCB

Fig. 3-10 S.M.P.S PCB Removal

+ 94 hidden pages

Samsung BD-P1580, BD-P1595, BD-P1595A, BD-P1600A, BD-P1620A Service Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

1-1 Safety Precautions

1-2 Servicing Precautions

1-2-1 General Servicing Precautions

1-2-2 Insulation Checking Procedure

1-3 ESD Precautions

1-4 Handling the optical pick-up

2-1-1 Player Features

2-1-2 Blu-ray Disc Features

2-1-3 Disc types and formats that can be played

2-1-4 Discs that cannot be played

2-1-5 Region code

2-1-6 Blu-ray Disc Compatibility

3-1 Cabinet and PCB (BD-P1600A)

3-1-1 Top Cabinet Removal

3-1-2 Ass'y Front-Cabinet Removal

3-1-3 Ass'y Deck Removal

3-1-4 S.M.P.S PCB Removal

3-1-5 Main PCB Removal

3-1-6 FAN Removal

3-2 Cabinet and PCB (BD-P1580)

3-2-1 Top Cabinet Removal

3-2-2 Ass'y Front-Cabinet Removal

3-2-3 Ass'y Deck Removal

3-2-4 S.M.P.S PCB Removal