SAMSUNG BD-P1500 User Manual

Blu-ray Disc Player

user manual

BD-P1500

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/global/register

key features of your new Blu-ray Disc Player

Player Features

Supports a Variety of Video Disc Types

Supports Blu-ray, DVD Video and DVD-RW/-R (V mode and ﬁ nalized only) discs.

HDMI (High Deﬁ nition Multimedia Interface)

HDMI reduces picture noise by allowing a pure digital video/audio signal path from the player to your TV.

Blu-ray Disc Features

Blu-ray Discs can store 25 GB (single layer) or 50 GB (dual layer) on a single sided disc - about 5 to 10 times the capacity of a DVD. Blu-ray Discs also support the highest quality HD video available in the industry - Large capacity means no compromise on video quality. Furthermore, a Blu-ray Disc has the same familiar size and look as a DVD.

* The following Blu-ray Disc features are disc dependant and will vary.

Appearance and navigation of features will also vary from disc to disc. Not all discs will have the features described below.

Video highlights

The BD-ROM format supports three highly advanced video codecs, including AVC, VC-1, and MPEG-2.

HD video resolutions are also available:

1920 x 1080 High Deﬁ nition

•

1280 x 720 High Deﬁ nition

•

For High-Deﬁ nition Playback

To view high-deﬁ nition contents on a Blu-ray Disc, an HDTV (High Deﬁ nition Television) is required. Some Blu-ray Discs may require using the player's HDMI OUT to view high-deﬁ nition content. The ability to view high-deﬁ nition content on Blu-ray Discs may be limited depending on the resolution of your TV.

Graphic planes

Two individual, full HD resolution (1920x1080) video layers are available, on top of the HD video layer. One layer is assigned to video-related graphics (like subtitles), and the other layer is assigned to interactive elements, such as buttons or menus. Various wipes, fades and scroll effects may be available on both layers.

PLAY MOVIE LANGUAGES SCENE SELECTIONS PREVIEWS

Graphic Planes

▼

3 4 5 6 7 8 9 10 11 12 13 14 15

HD Video

2_ English

Menu graphics

Support full color resolution graphics and animation, thereby greatly surpassing the capabilities of DVD-Video. Unlike DVD, Menus can be accessed during video playback.

Menu sounds

When you highlight or select a menu option on a disc, sounds can be heard such as button clicks or a voice-over explaining the highlighted menu choice.

Multi-page/PopUp Menus

Unlike the DVD-Video, playback is not interrupted each time a new menu

PLAY MOVIE LANGUAGES SCENE SELECTIONS PREVIEWS

screen is accessed. Due to Blu-ray Disc's ability to preload data from the disc without interrupting playback, a menu may consist of several pages. You can browse through the menu pages or select different menu paths, while the audio and video continues playing in the background.

Interactivity

▼

3 4 5 6 7 8 9 10 11 12 13 14 15

Certain Blu-ray Discs may contain Animated menus and Trivia games.

User Browsable Slideshows

With Blu-ray Discs, you can browse through various still pictures while the audio remains playing.

Subtitles

Depending on what is contained on the Blu-ray Disc, you may be able to select different font styles, sizes and colors for the subtitles. Subtitles may also be animated, scrolled or faded in and out.

WHAT’S INCLUDED

Check for the supplied accessories below.

Composite (Video), Audio L/R Cable

(AC39-42001R)

User Manual

(AK68-01608F)

Batteries for Remote Control (AAA Size)

(4301-001035)

Quick Guide

(AK68-01610F)

OPEN/CLOSE

PAUSE

ENTER

Remote Control

(AK59-00070D)

English _3

safety information

WARNING

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lighting ﬂ ash and Arrowhead within Triangle Is a warning sign alerting you of dangerous voltage Inside the product

WARNING

To reduce the risk of ﬁ re or electric shock, do not expose this appliance to rain or moisture.

•

To prevent injury, this player must be securely attached to the ﬂ oor/wall in accordance with the installation instructions.

•

Note to CATV system installer

This reminder is provided to call CATV system installer’s attention to Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I) that provides guidelines for proper grounding and, in particular, speciﬁ es that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

FCC NOTE (for U.S.A):

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on.

The user is encouraged to try to correct the interference by one or more of the following measures.

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

•

This class B digital player meets all requirements of the Canadian Interference - Causing Equipment Regulations.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The explanation point within the triangle is a warning sign alerting you of important instructions accompanying the product.

CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LÁSER CLASE 1

CLASS 1 LASER PRODUCT

Use of controls, adjustments or performance of procedures other than those speciﬁ ed herein may result in hazardous radiation exposure.

CAUTION

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

4_ safety information

Note:

•

This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere.

•

This Blu-ray Disc Player is designed and manufactured to respond to the Region Management Information. If the Region number of a Blu-ray Disc/DVD disc does not correspond to the Region number of this Blu-ray Disc Player, the Blu-ray Disc Player cannot play the disc.

•

The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. This product is covered by one or more of the following U.S. patents: 5,060,220 5,457,669 5,561,649 5,705,762 6,043,912 6,438,099 6,467,061 6,556,521 6,578,163 6,697,307 6,728,474 6,771,891 6,894,963 6,895,593 6,937,815 6,996,327 7,009,926 7,085,221 7,088,649 7,092,327 7,099,566 7,123,564 7,142,493 7,142,495 7,145,861 7,146,624 7,151,729 7,161,879 7,164,647 7,167,437 7,173,891 7,177,250 7,194,187 7,203,891 7,209,423 7,210,067 7,228,062 7,245,566 7,245,567 7,257,065 7,263,045 7,269,110 7,272,086 7,272,106 7,280,460 7,283,729 7,286,454 7,304,938

This product is covered by the following U.S. patents: US4,930,158 US4,930,160

This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for commercial use. The license does not cover any product unit other than this product unit and the license does not extend to any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/ IEC 13818-3 used or sold in combination with this product unit. The license only covers the use of this product unit to encode and/or decode audio ﬁ les conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.

PRECAUTIONS

Important Safety Instructions

● SAFETY INFORMATION

Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. these operating instructions handy for future reference.

Read these instructions.

1) Keep these instructions.

2) Heed all warnings.

3) Follow all instructions.

4) Do not use this player near water.

5) Clean only with dry cloth.

6) Do not block any ventilation openings, install in accordance with the manufacturer's instructions.

7) Do not install near any heat sources such as radiators, heat registers, or other player (including ampliﬁ ers) that

8) produce heat.

The polarized or the grounding type plug has an important safety purpose. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not ﬁ t into your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being deformed or pinched particularly at plugs, convenience receptacles, and the

10) point where they exit from the player.

Only use attachments/accessories speciﬁ ed by the manufacturer.

11)

12)

Use only with the cart, stand, tripod, bracket, or table speciﬁ ed by the manufacturer, or sold with the player. When a cart is used, use caution when moving the cart/player combination to avoid injury from tip-over.

Unplug this player during lightning storms or when unused for long periods of time.

13) Refer all servicing to a qualiﬁ ed service personnel. Servicing is required when the

14) player has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the player, the player has been exposed to rain or moisture, does not operate normally, or has been dropped.

Keep

English _5

safety information

Handling Cautions

Before connecting other components to this Blu-ray Disc Player, be sure to turn them all off.

•

Do not move the Blu-ray Disc Player while a disc is being played as the disc may be scratched or broken, or the

•

Blu-ray Disc Player’s internal parts may be damaged.

•

Do not put a ﬂ ower vase ﬁ lled with water or any small metal objects on the Blu-ray Disc Player. Be careful not to put your hand into the disc tray.

•

Do not place anything other than the disc in the disc tray.

•

Exterior interferences such as lightning and static electricity can affect the normal operation of this Blu-ray Disc Player. If this occurs, turn the Blu-ray Disc Player off and on again with the POWER button, or disconnect and then reconnect the AC power cord to the AC power outlet. The Blu-ray Disc Player will operate normally.

•

Be sure to remove the disc and turn off the Blu-ray Disc Player after use.

•

Disconnect the AC power cord from the AC outlet when you don’t intend to use the Blu-ray Disc Player for long periods of time.

•

To clean a disc, wipe it in a straight line from the inside to the outside of the disc.

•

Do not expose the player to any liquid.

•

When the AC plug is connected to a wall outlet, the player will still draw power (standby mode) when it is turned off.

•

The player should not be exposed to dripping or splashing of any liquid and no objects ﬁ lled with liquids, such as vases, should be placed on the player.

•

To disconnect the player from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be easily accessible.

Maintenance of Cabinet

For safety reasons, be sure to disconnect the AC power cord from the AC outlet.

•

Do not use benzene, thinner, or other solvents for cleaning.

•

Wipe the cabinet with a soft cloth.

Restrictions on Playback

•

This player may not respond to all operating commands because some Blu-ray Disc, DVD, CD discs allow speciﬁ c or limited operation and features during playback. Please note that this is not a defect in the player.

•

Samsung cannot assure that this player will play every disc bearing the Blu-ray Disc, DVD or CD logo because disc formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, CD software and/or the manufacture of discs. Please contact the SAMSUNG customer care center if you have questions or encounter difﬁ culty in playing Bluray Disc, DVD, CD discs in this player. Also, refer to rest of this Manual for additional information on playback restrictions.

6_ safety information

contents

KEY FEATURES OF YOUR NEW

BLU-RAY DISC PLAYER

SAFETY INFORMATION

GETTING STARTED

DESCRIPTION

REMOTE CONTROL

CONNECTIONS

3 What’s included

4 Warning 5 Precautions

9 Before using the User’s Manual 10 Disc Type and Characteristics 13 Disc Storage & Management

14 Front Panel 15 Front Panel Display 16 Rear Panel

17 Tour of the Remote Control 18 Setting the Remote Control 18 Regarding the battery 19 Controllable TV Codes 20 Connecting to a TV with an HDMI Cable

(Best Quality)

21 HDMI Auto Detection Function 22 Connecting to a TV with DVI Cable

(Best Quality)

23 Connecting to a TV (Component)

(Better Quality)

24 Connecting to a TV (VIDEO) (Good Quality) 25 Connecting to an Audio System (2 Channel

Ampliﬁ er)

26 Connecting to an Audio System (Dolby

Digital, DTS Ampliﬁ er)

27 Connecting to an Audio System (HDMI

supported Ampliﬁ er)

28 Connecting to samsung’s update server

● CONTENTS

BASIC FUNCTIONS OF YOUR

BLU-RAY DISC PLAYER

SYSTEM SETUP

LANGUAGE SETUP

29 Before Playing 30 On-Screen Menu Navigation 30 Playing a Disc 31 Setting the Power On/Off Beep sound 31 Using the Search and Skip Functions 32 Slow Motion Play/Step Motion Play

33 Setting the Clock

34 Setting up the Language Options

English _7

contents

AUDIO SETUP

DISPLAY SETUP

HDMI SETUP

PARENTAL SETUP

NETWORK SETUP

PERSISTENT STORAGE

MANAGEMENT

35 Setting up the Audio Options

37 Setting up the Display Options

40 Setting up the HDMI setup options

42 Setting up the Parental Lock

44 TCP/IP Setting 45 Proxy Setting 45 NTP server setting (Used to Retrieve Time

Information from NTP server)

46 Mac Address 47 System Device Management

SYSTEM UPGRADE

WATCHING A MOVIE

LISTENING TO MUSIC

TROUBLESHOOTING

APPENDIX

48 Firmware Upgrade 50 System Information

51 Using the Display Function 52 Using the Disc Menu & Popup/Title Menu 53 Repeat Play 54 Selecting the Audio Language 55 Selecting the Subtitle Language 55 Changing the Camera Angle 56 BONUSVIEW Settings 57 Using the Bookmark Function

59 Playing an Audio CD(CD-DA) 59 Audio CD(CD-DA) Screen Elements 60 Buttons on the Remote Control used for

Audio CD (CD-DA) disc playback

60 Repeat Audio CD(CD-DA) 62 Troubleshooting

64 Speciﬁ cations

8_ contents

getting started

BEFORE USING THE USER’S MANUAL

Make sure to check the following terms before using the user’s manual.

Icons that will be used in this manual

Icon Term Deﬁ nition

h g

Z C

V B

About the use of this user’s manual

BD-ROM This involves a function available on a BD-ROM.

BD-RE This involves a function available on the BD-RE.

DVD-VIDEO

DVD-RW This involves a function available on DVD-RW. (V mode and ﬁ nalized only)

DVD-R This involves a function available on DVD-R. (V mode and ﬁ nalized only)

Audio CD

Note

Be sure to be familiar with Safety Instructions before using this product. (See pages 4~6) If a problem occurs, check the Troubleshooting section. (See pages 62~63)

This involves a function available on DVD-Video or DVD-R/DVD-RW discs that have been recorded and ﬁ nalized in Video Mode.

This involves a function available on an audio CD-RW/CD-R (CD-DA format).

This involves tips or instructions on the page that help each function operate.

● GETTING STARTED

prior written permission of Samsung Electronics Co.,Ltd.

English _9

getting started

DISC TYPE AND CHARACTERISTICS

Disc types that can be played

Disc Types Disc Logo Recorded content Disc Shape Max. Playing minute

BD-ROM BD-RE/BD-R

DVD-VIDEO

DVD-RW (V mode and ﬁ nalized only)

DVD-R (V mode and ﬁ nalized only)

AUDIO-CD

This player is compatible with the NTSC color system only.

•

PAL discs will not play.

•

AUDIO + VIDEO Single sided (25GB/50GB)

Single sided(5 inches) 240

AUDIO + VIDEO

AUDIO + VIDEO 5 inches (4.7GB)

AUDIO

Double sided(5 inches) 480 Single sided(3 1/2 inches) 80 Double sided(3 1/2 inches) 160

Single sided(5 inches) 74 Single sided (3 1/2 inches) 20

Logos of Discs that can be played

Playing time depends

on the Title

480

(EX : Extended Play)

480

(EX : Extended Play)

Blu-ray Disc Dolby Digital Plus Digital Audio

Dolby TrueHD

Discs that cannot be played

Blu-ray Discs with a region code other than "Region A".

•

DVD-Video with a region number other than “1” or “ALL”

•

HD DVD

•

DVD-RAM

•

10_ getting started

NTSC broadcast system in

U.S.A, Canada, Korea, Japan

Stereo Java

3.9 GB DVD-R Disc for Authoring.

•

DVD-RW(VR mode)

•

DVD-ROM/PD/MV-Disc, etc

•

CVD/CD-ROM/CDV/CD-G/CD-I/LD

•

[Note]

•

Some commercial discs and DVD discs purchased outside your region may not be playable with this product. When these discs are played, either “No disc.” or “Please check the regional code of the disc.” will be displayed.

•

If a DVD-R/-RW disc has not been recorded properly in DVD video format, it will not be playable.

•

The unit cannot play CD-RW/CD-R and DVD-RW/-R recorded content such as divx, avi, mpg, mov, wma, mp3,digital photo view(JPEG) ﬁ le.

Region code

Both the Blu-ray Disc Player and the discs are coded by region. These regional codes must match in order to play the disc. If the codes do not match, the disc will not play. The Region Number for this Blu-ray Disc Player is described on the rear panel of the Blu-ray Disc Player.

Disc Type Blu-ray DVD-VIDEO

● GETTING STARTED

Region code

Blu-ray Disc Region Code Area

A B Europe, Greenland, French territories, Middle East, Africa, Australia and New Zealand. C India, China, Russia, Central and South Asia.

DVD Region Code Area

1 2 3 4 5 6

North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia.

The U.S., U.S. territories and Canada Europe, Japan, the Middle East, Egypt, South Africa, Greenland Taiwan, Korea, the Philippines, Indonesia, Hong Kong Mexico, South America, Central America, Australia, New Zealand, Paciﬁ c Islands, Caribbean Russia, Eastern Europe, India, most of Africa, North Korea, Mongolia China

Blu-ray Disc Compatibility

Blu-ray Disc is a new and evolving format. Accordingly, disc compatibility issues are possible. Not all discs are compatible and not every disc will play back. For additional information, refer to the Compliance and Compatibility Notice section of this Manual. If you encounter compatibility problems, please contact the SAMSUNG customer care center at 1-800 SAMSUNG. This Samsung Blu-ray Disc Player (BD-P1500) supports only the BD-ROM Proﬁ le 1 version 1.1 speciﬁ cation.

Playback may not work for some types of discs, or when speciﬁ c operations, such as angle change and aspect



ratio adjustment, are being performed. Information about the discs is written in detail on the disc box. Please refer to this if necessary.

Do not allow the disc to become dirty or scratched. Fingerprints, dirt, dust, scratches or deposits of cigarette



smoke on the recording surface may make it impossible to use the disc for playback. Discs with PAL programs recorded on them cannot be played using this product.



When a BD-Java title is played, loading may take longer than a normal title, or some functions may perform slowly.



English _11

getting started

Disc Types

BD-ROM

❖

Blu-ray Disc Read Only Memory. A BD-ROM disc contains pre-recorded data. Although a BD-ROM may contain any form of data, most BD-ROM discs will contain movies in High Deﬁ nition format, for playback on Blu-ray Disc Player's. This unit can play back pre-recorded commercial BD-ROM discs.

❖

BD-RE/BD-R

Blu-ray Disc Rewritable/Blu-ray Disc Recordable. BD-RE/BD-R is the ideal format for making backups, or recording personal video.

❖

DVD-Video

A digital versatile disc (DVD) can contain up to 135-minutes of images, 8 audio languages and 32

•

subtitle languages. It is equipped with MPEG-2 picture compression and Dolby Digital surround, allowing you to enjoy vivid and clear theatre quality images.

When switching from the ﬁ rst layer to the second layer of a dual-layered DVD Video disc, there

•

may be momentary distortion in the image and sound. This is not a malfunction of the unit. Once a DVD-RW/-R recorded in Video Mode is ﬁ nalized, it becomes DVD-Video. Pre-recorded

•

(pre-stamped) commercial DVDs with movies are also referred to as DVD-Videos. This unit can play back pre-recorded commercial DVD discs (DVD-Video discs) with movies.

❖

Audio CD

•

An audio disc on which 44.1kHz PCM Audio is recorded. This unit can play back CD-DA format audio CD-RW and CD-R discs.

•

The unit may not be able to play some CD-RW or CD-R discs due to the condition of the recording.

•

CD-RW/CD-R

❖

Use a 700MB(80 minutes) CD-RW/CD-R disc. If possible, do not use a 800MB(90 minutes) or

•

above disc, as the disc may not play back. If the CD-RW/CD-R disc was not recorded as a closed session, you may experience delays when

•

playing back the beginning of the disc or all recorded ﬁ les may not play. Some CD-RW/CD-R discs may not be playable with this unit, depending on the device which was

•

used to burn them. For contents recorded on CD-RW/CD-R media from CDs for your personal use,playability may vary depending on contents and discs.

DVD-R Disc Playback

❖

Once a DVD-R recorded in Video Mode is ﬁ nalized, it becomes DVD-Video.

•

This unit can play back DVD-R discs recorded and ﬁ nalized with a DVD video recorder. It may not be able to play some DVD-R discs depending on the disc and the condition of the recording.

DVD-RW Disc Playback

❖

Playback can be performed with DVD-RW discs recorded in the Video Mode and ﬁ nalized.

•

Once a DVD-RW recorded in Video Mode is ﬁ nalized, it becomes DVD-Video. Ability to play back

•

may depend on recording conditions.

Disc Format

DVD-RW/-R (V)

❖

This is a format that is used for recording data on a DVD-RW or DVD-R disc. The disc can be

•

played by this Blu-ray Disc Player once it has been ﬁ nalized.

AVCHD (Advanced Video Codec High Deﬁ nition)

❖

This player can playback AVCHD format discs. These discs are normally recorded and used in

•

camcorders. The AVCHD format is a high deﬁ nition digital video camera format.

•

The MPEG-4 AVC/H.264 format is capable of compressing images at higher efﬁ ciency than that

•

of the conventional image compressing format. Some AVCHD discs use the “x.v.Color” format.

•

This player can playback AVCHD discs using “x.v.Color” format.

•

“x.v.Color” is a trademark of Sony Corporation.

•

12_ getting started

“AVCHD” and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd.

•

and Sony Corporation.

Some AVCHD format discs may not play, depending on the recording condition.



AVCHD format discs need to be ﬁ nalized.



“x.v.Color” offers a wider color range than normal DVD camcorder discs.



DISC STORAGE & MANAGEMENT

Disc Handling

Use discs with regular shapes. If an irregular disc (a disc with a special shape)

•

is used, this Blu-ray Disc Player may be damaged.

Holding discs

❖

Avoid touching the surface of a disc where recording is performed.

•

Blu-ray Discs

❖

If the player is not used for a long period of time, remove the Blu-ray Disc from the player and

•

store it in its case. Be careful not to leave ﬁ ngerprints or scratches on the surface of the Blu-ray Disc.

•

DVD-RW and DVD-R

❖

Clean with an optional PD disc cleaner (LF-K200DCA1 where available).

•

Do not use cleaners or cloths for CDs to clean DVD-RW/-R discs.

DVD-Video, Audio-CD

❖

Wipe off dirt or contamination on the disc with a soft cloth.

•

Cautions on handling discs

❖

Do not write on the printed side with a ball-point pen or pencil.

•

Do not use record cleaning sprays or antistatic. Also, do not use volatile

•

chemicals, such as benzene or thinner. Do not apply labels or stickers to discs. (Do not use discs ﬁ xed with exposed

•

tape adhesive or leftover peeled-off stickers.) Do not use scratch-proof protectors or covers.

•

Do not use discs printed with label printers available on the market.

•

Do not load warped or cracked discs.

•

● GETTING STARTED

Disc Storage

Be careful not to damage the disc because the data on these discs is highly vulnerable to the environment.

•

Do not keep under direct sunlight.

•

Keep in a cool ventilated area.

•

Store vertically.

•

Keep in a clean protection jacket.

•

If you move your Blu-ray Disc Player suddenly from a cold place to a warm place, condensation may generate on the operating parts and lens and cause abnormal disc playback. If this occurs, wait for two hours before connecting the plug to the power outlet. Then insert the disc and try to play back again.

English _13

description

FRONT PANEL

POWER BUTTON

DISC TRAY

PLAY/PAUSE BUTTON

SEARCH/SKIP BUTTONS

STOP BUTTON

DISPLAY

REMOTE CONTROL SENSOR

OPEN/CLOSE BUTTON

8 6

Turns the Blu-ray Disc Player on and off.

Opens to accept a disc.

Plays a disc or pauses playback.

Goes to the next title/chapter/track or goes back to the previous title/chapter/track.

Stops disc playback.

Displays the playing status, time, etc.

Detects any signal from the remote control.

Opens and closes the disc tray.

5 47

14_ description

FRONT PANEL DISPLAY

● DESCRIPTION

Playback-related,

Open/Close indicator

In Disc Indicator

Disc type indicators

USB Indicator

HDMI Indicator

Resolution Indicator

STATUS Indicator

Lights when playback-related and open/close buttons are selected.

Lights when a disc is in the tray.

Lights to indicate the disc type in the tray.

Lights to indicate when USB is connected.

Lights to indicate when HDMI is connected.

Indicates the 1080p, 1080i or 720p resolution when HDMI or Component is connected.

Playing time/clock/current status indicator.

English _15

description

REAR PANEL

DIGITAL

LAN

USB HOST

AUDIO OUT

HDMI OUT

OPTICAL

LAN

USB HOST

COMPONENT OUT

AV OUT

HDMI OUT

2 3 654

DIGITAL

AUDIO OUT

OPTICAL

COMPONENT OUT

AV OUT

16_ description

LAN

USB HOST

HDMI OUT

DIGITAL AUDIO OUT (OPTICAL)

AUDIO OUT

VIDEO OUT

COMPONENT VIDEO OUT

The USB Host jack is for ﬁ rmware upgrades only. You cannot play audio or video content from a USB device.

 

Software upgrades using the USB Host jack supports only a USB ﬂ ash drive.

The LAN jack is used to connect to Samsung’s server for ﬁ rmware updates.

You can use only a USB ﬂ ash drive to perform software upgrades.

Using a HDMI cable, connect this HDMI output terminal to the HDMI input terminal on your TV for the best quality picture or on your Receiver for the best quality sound.

Connects to a Receiver.

Connects to the audio input of external equipment using audio cables.

Connects the input of external equipment using a video cable.

Connects to equipment having Component video input.

Other USB devices(ex. MP3 player) are not guaranteed to work.



USB ﬂ ash drives with the bulky dimension cannot be inserted when an HDMI cable or a LAN cable is connected.

remote control

TOUR OF THE REMOTE CONTROL

Installing batteries in the Remote Control

● REMOTE CONTROL

1. Lift the cover at the back of the remote control upward as shown.

OPEN/CLOSE Buttons

To open and close the disc tray.

POWER Button

NUMBER Buttons

CANCEL Button

Each time this button is pressed, the disc will play

REVERSE/FORWARD SKIP Buttons

Press to skip backwards or forwards.

REVERSE/FORWARD SEARCH Buttons

Press to search a disc backwards or forwa

Brings up the Blu-ray Disc Player’s setup menu.

ENTER/DIRECTION Buttons

SLOW Button

slowly.

TV VOL Buttons

TV volume adjustment

MENU Button

2. Install two AAA size batteries.

Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.

OPEN/CLOSE

PAUSE

rds.

3. Replace the cover.

Assuming typical TV usage, the batteries last for about one year.

TV POWER Button

TV INPUT SEL. Button

After setup, allows you to set the input source on your TV.

PAUSE Button

Press to pause a disc.

STOP Button

Press to stop a disc.

PLAY Button

Press to play a disc.

TV CH Button

Use this to select a TV program.

TV MUTE Button

Mutes the speakers of your TV.

RETURN Button

Displays current setting or disc status.

Use this to enter the disc menu.

COLOR Buttons : RED(A), GREEN (B),

Use this to access various audio functions on a

Use this to bookmark a position while playing a disc.

Press this to switch the Blu-ray Disc/DVD’s

INFO Button

DISC MENU Button

YELLOW(C), BLUE(D)

AUDIO Button

(Blu-ray Disc/DVD).

MARKER Button

SUBTITLE Button

subtitle language.

disc

ENTER

EXIT Button

POPUP MENU/TITLE MENU Button

Use this to enter

REPEAT A-B Button

Allows you to repeat playback of a certain section.

BONUSVIEW Button

Use this to turn on or off the BONUSVIEW function on supported Blu-ray Discs.

REPEAT Button

Allows you to repeat a title, chapter, track or disc.

the popup menu/title menu.

English _17

remote control

SETTING THE REMOTE CONTROL

You can control certain functions of your TV with this remote control.

Control function buttons include : TV POWER, TV CH ,/., TV VOL +/–, TV MUTE, TV INPUT SEL. button.

To determine whether your television is compatible, follow the instructions below.

Switch your television on.

Point the remote control towards the television.

Press and hold the TV POWER button and enter the two-ﬁ gure code corresponding to the brand of your television, by pressing the appropriate number buttons. (see the next page for the code list).

If your television is compatible with the remote control, it will switch off. It is now programmed to operate with the remote control.

If several codes are indicated for your television brand, try each one in turn until you ﬁ nd one that works.



If you replace the remote control's batteries, you must set the brand code again.



You can then control the television using the following buttons after pressing the TV button.

Button Function

TV POWER Used to switch the television on and off. TV INPUT SEL. Used to select an external source. TV VOL (+/–) Used to adjust the volume of the television.

,/.

TV CH ( TV MUTE Used to toggle the sound on and off.

) Used to select the desired channel.

The functions listed above will not necessarily work on all televisions. If you encounter problems, operate the



television directly.

REGARDING THE BATTERY

If the remote does not operate properly:

Check the polarity +/– of the batteries (Dry-Cell)

•

Check if the batteries are drained.

•

Check if remote sensor is blocked by obstacles.

•

Check if there is any ﬂ uorescent lighting nearby.

•

Dispose of batteries according to local environmental regulations. Do not put them in the household trash.

18_ remote control

CONTROLLABLE TV CODES

Brand

SAMSUNG

AIWA

ANAM

BANG & OLUFSEN

BLAUPUNKT

BRANDT

BRIONVEGA

CGE

CONTINENTAL EDISON

DAEWOO

EMERSON

FERGUSON

FINLUX

FORMENTI

FUJITSU

GRADIENTE

GRUNDIG

HITACHI

IMPERIAL

JVC

LOEWE

LOEWE OPTA

MAGNAVOX

METZ

MITSUBISHI

MIVAR

NEC

NEWSAN

NOBLEX

NOKIA

NORDMENDE

PANASONIC

PHILIPS

PHONOLA

PIONEER RADIOLA

RADIOMARELLI

RCA REX

SABA

SALORA

SANYO

SCHNEIDER

SELECO

SHARP

SIEMENS

SINGER

SINUDYNE

SONY

TELEAVA

TELEFUNKEN

THOMSON

THOMSON ASIA

TOSHIBA

WEGA YOKO

ZENITH

Code

TV POWER+01, +02, +03, +04, +05, +06, +07, +08, +09 TV POWER+82 TV POWER+10, +11, +12, +13, +14, +15, +16, +17, +18 TV POWER+57 TV POWER+71 TV POWER+73 TV POWER+57 TV POWER+52 TV POWER+75 TV POWER+19, +20, +23, +24, +25, +26, +27, +28, +29, +30, +31, +32, +33, +34 TV POWER+64 TV POWER+73 TV POWER+06, +49, +57 TV POWER+57 TV POWER+84 TV POWER+70 TV POWER+49, +52, +71 TV POWER+60, +72, +73, +75 TV POWER+52 TV POWER+61, +79 TV POWER+06, +19, +20, +21, +22, +78 TV POWER+06, +69 TV POWER+06, +57 TV POWER+40 TV POWER+57 TV POWER+06, +48, +62, +65 TV POWER+52, +77 TV POWER+83 TV POWER+68 TV POWER+66 TV POWER+74 TV POWER+72, +73, +75 TV POWER+53, +54, +74, +75 TV POWER+06, +55, +56, +57 TV POWER+06, +56, +57 TV POWER+58, +59, +73, +74 TV POWER+06, +56 TV POWER+57 TV POWER+45, +46 TV POWER+74 TV POWER+57, +72, +73, +74, +75 TV POWER+74 TV POWER+41, +42, +43, +44, +48 TV POWER+06 TV POWER+74 TV POWER+36, +37, +38, +39, +48 TV POWER+71 TV POWER+57 TV POWER+57 TV POWER+35, +48 TV POWER+73 TV POWER+67, +73, +75, +76 TV POWER+72, +73, +75 TV POWER+80, +81 TV POWER+47, +48, +49, +50, +51, +52 TV POWER+57 TV POWER+06 TV POWER+63

● REMOTE CONTROL

English _19

connections

DIG

AUDIO OU

COMPO

LAN

OST

This section involves various methods of connecting the Blu-ray Disc Player to other external components such as a TV.

CONNECTING TO A TV WITH AN HDMI CABLE (BEST QUALITY)

Using an HDMI-HDMI cable (not included) connect the HDMI OUT terminal on the rear of the Blu-ray Disc Player to the HDMI IN terminal of your TV.

Press the input selector on your TV remote control until the HDMI signal from the Blu-ray Disc Player appears on your TV screen.

•

If you have set the remote control to operate your TV (see pages 18~19), press the TV INPUT SEL. button on the remote control and select HDMI as the external source of the TV.

COMPONENT OUT

DIGITAL

AUDIO OUT

HDMI OUT

LAN

USB HOST

OPTICAL

AV OUT

LAN

USB HOST

B H

HDMI OUT

DIGITAL

ITAL

AUDIO OUT

OPTICAL

COMPONENT OUT

NENT OUT

AV OUT

HDMI cable

(not included)

If the HDMI cable is connected or removed during playback of a CDDA, the player will stop playing.



If the player is connected to your TV in HDMI 1080p output mode, you must use High speed(category2) HDMI



cable.

20_ connections

HDMI AUTO DETECTION FUNCTION

The player's video output will automatically change to HDMI output resolution when connecting an HDMI cable while power is on (see page 39).

Depending on your TV, certain HDMI output resolutions may not work.



Please refer to the user's manual of your TV.



If an HDMI cable is connected from the player to a TV, the Blu-ray Disc Player’s output is set to HDMI output



resolution automatically within 10 seconds. If Component and HDMI are both connected, HDMI mode is automatically selected. (See page 39)



When you connect the player to the TV using the HDMI cable for the ﬁ rst time or to a new TV, the HDMI output



resolution will be automatically set to the highest provided by the TV. If you connect a Samsung TV to the Blu-ray Disc Player using an HDMI cable, the player can be easily operated



using the TV remote control. (This is only available with Samsung TVs that support the Anynet+ feature.) (See pages 40~41)

HDMI (High Deﬁ nition Multimedia Interface)

•

HDMI is an interface that enables the digital transmission of video and audio data with just a single connector. Using HDMI, the Blu-ray Disc Player transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack.

HDMI connection description

•

HDMI connector - Supports video and digital audio data (LPCM or Bitstream).

- HDMI outputs only a pure digital signal to the TV.

- If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.

Why does Samsung use HDMI?

•

Analog TVs require an analog video/audio signal. However, when playing a Blu-ray Disc/DVD, the data transmitted to a TV is digital. Therefore either a digital-to-analog converter (in the Blu-ray Disc Player) or an analog-to-digital converter (in the TV) is required. During this conversion, the picture quality is degraded due to noise and signal loss. HDMI technology is superior because it requires no D/A conversion and is a pure digital signal from the player to your TV.

What is the HDCP?

•

HDCP (High-band width Digital Content Protection) is a system for protecting Blu-ray Disc/DVD content outputted via HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV, projector . etc). Content is encrypted at the source device to prevent unauthorized copies from being made.

What is Anynet+?

•

Anynet+ is a convenient function that offers linked operation of this unit through Samsung TVs with the Anynet+ feature.

- If your Samsung TV has an

- If you turn on the player and insert a disc, the player will start playing the disc, and the TV will turn on automatically and switch to HDMI mode.

- If you turn on the player and press the Play button with a disc already inserted,the TV will immediately turn on and switch to HDMI mode.

logo, then it supports the Anynet+ function.

● CONNECTIONS

English _21

connections

DIG

AUDIO OU

COMPO

OST

CONNECTING TO A TV WITH DVI CABLE (BEST QUALITY)

Using the HDMI-DVI cable (not included), connect the HDMI OUT terminal on the rear of the Blu-ray Disc Player to the DVI IN terminal of your TV.

Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Blu-ray Disc Player to the AUDIO (red and white) IN terminals of your TV. Turn on the Blu-ray Disc Player and TV.

Press the input selector on your TV remote control until the DVI signal from the Blu-ray Disc Player appears on your TV screen.

•

If you have set the remote control to operate your TV (see pages 18~19), press the TV INPUT SEL. button on the remote control and select HDMI as the external source of the TV.

Connecting the HDMI cable while the Blu-ray Disc Player’s power is on will result in the player’s video output being changed to HDMI mode automatically (see page 39).

Depending on your TV, certain HDMI output resolutions may not work.



Please refer to the user's manual of your TV.



If an HDMI-DVI cable is plugged into the TV, the Blu-ray Disc Player’s output resolution is set to HDMI



automatically within 10 seconds. If Component and HDMI are both connected, HDMI mode is automatically selected. (See page 39)



When you connect the player to the TV using the HDMI cable for the ﬁ rst time or to a new TV, the HDMI output



resolution will be automatically set to the highest provided by the TV If the HDMI cable is connected or removed during playback of a CDDA, the player will stop playing.



DIGITAL

AUDIO OUT

HDMI OUT

LAN

USB HOST

OPTICAL

22_ connections

COMPONENT OUT

AV OUT

LAN

USB HOST

B H

HDMI OUT

DIGITAL

ITAL

AUDIO OUT

OPTICAL

PTICAL

COMPONENT OUT

NENT OUT

AV OUT

Audio Cable

HDMI-DVI cable

(not included)

WhiteRed

CONNECTING TO A TV (COMPONENT) (BETTER QUALITY)

DIG

AUDIO OU

- Connecting to your TV using Component video cables.

- You will enjoy high quality and accurate color reproduction images. Component video separates the picture element into black and white(Y), blue(P

B), red(PR) signals to present clear and clean images. (Audio signals are

delivered through the audio output.)

Using Component video cables (not included) , connect the COMPONENT VIDEO OUT terminals on the rear of the Blu-ray Disc Player to the COMPONENT IN terminals of your TV.

Press the input selector on your TV remote control until the Component signal from the Blu-ray Disc Player appears on the TV screen.

•

If you have set the remote control to operate your TV (see pages 18~19), press the TV INPUT SEL. button on the remote control and select COMPONENT as the external source of the TV.

COMPONENT OUT

DIGITAL

AUDIO OUT

HDMI OUT

LAN

USB HOST

OPTICAL

AV OUT

DMI OU

LAN

USB HOST

SB HOS

HDMI OUT

DIGITAL

ITAL

AUDIO OUT

OPTICAL

COMPONENT OUT

AV OUT

Component cable

(not included)

Audio Cable

● CONNECTIONS

(Audio)Red

Depending on the manufacturer, the component terminals on your TV may be marked “R-Y, B-Y, Y” or “Cr,



White Red Blue Green

Cb, Y” instead of “Pr, Pb, Y”. The number and position of terminals may vary depending on the TV set. Please refer to the user's manual of your TV.

You can select from a variety of resolution settings for Blu-ray Discs such as 1080i, 720p, 480p and 480i,



depending on the disc type. (See page 39) The actual resolution may differ from the setting in the SETUP menu if both Component and HDMI cables are



connected. The resolution may also be different depending on the disc. (See page 39) In DVD playback, if both HDMI and Component jacks are connected and you select the Component mode, the



Display Setup menu will show the output resolution as 1080p. The resolution is actually 480i.

English _23

connections

AUDIO OU

LAN

OST

CONNECTING TO A TV (VIDEO) (GOOD QUALITY)

Using video/audio cables, connect the VIDEO (yellow) / AUDIO (red and white) OUT terminals on the rear of the Blu-ray Disc Player to the VIDEO (yellow) / AUDIO (red and white) IN terminals of your TV.

Turn on the Blu-ray Disc Player and TV.

Press the input selector on your TV remote control until the Video signal from the Blu-ray Disc Player appears on the TV screen.

•

If you have set the remote control to operate your TV (see pages 18~19), press the TV INPUT SEL. button on the remote control and select VIDEO as the external source of the TV.

COMPONENT OUT

DIGITAL

AUDIO OUT

HDMI OUT

LAN

USB HOST

OPTICAL

AV OUT

DMI OUT

LAN

USB HOST

B H

HDMI OUT

DIGITAL

IGITAL

AUDIO OUT

OPTICAL

COMPONENT OUT

OMPONENT OUT

AV OUT

WhiteRed Yellow

Noise may be generated if the audio cable is placed too close to the power cable.



If you want to connect to an Ampliﬁ er, please refer to the Ampliﬁ er connection pages. (See pages 25~27)



The number and position of terminals may vary depending on your TV set. Please refer to the user's manual of



your TV. If there is only one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the



Blu-ray Disc Player. The VIDEO source is always output in 480i resolution regardless of the resolution set in the SETUP menu.



(See page 39)

24_ connections

CONNECTING TO AN AUDIO SYSTEM (2 CHANNEL AMPLIFIER)

AUDIO OU

COMPO

OST

Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Blu-ray Disc Player to the AUDIO (red and white) IN terminals of your Ampliﬁ er.

Using the video signal cable(s), connect the HDMI, COMPONENT or VIDEO OUT terminals on the rear of the Blu-ray Disc Player to the HDMI, COMPONENT or VIDEO IN terminal of your TV as described on pages 20 to

24.

Turn on the Blu-ray Disc Player, TV and Ampliﬁ er.

Press the input select button of the Ampliﬁ er to select the external input in order to hear sound from the Blu-ray Disc Player. Refer to your Ampliﬁ er's user manual to set the Ampliﬁ er's audio input.

COMPONENT OUT

DIGITAL

AUDIO OUT

HDMI OUT

LAN

USB HOST

OPTICAL

AV OUT

DMI OUT

LAN

USB HOST

B H

HDMI OUT

DIGITAL

IGITAL

AUDIO OUT

OPTICAL

COMPONENT OUT

NENT OUT

AV OUT

Audio Cable

● CONNECTIONS

2-Channel stereo amp

WhiteRed

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of



Dolby Laboratories. Manufactured under license under U.S. Patent #: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535



& other U.S. and worldwide patents issued & pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Advanced Digital Out are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved.

English _25

connections

COMPO

OST

CONNECTING TO AN AUDIO SYSTEM (DOLBY DIGITAL, DTS AMPLIFIER)

Using the optical cable (not included), connect the DIGITAL AUDIO OUT (OPTICAL) terminal on the rear of the Blu-ray Disc Player to the DIGITAL AUDIO IN (OPTICAL) terminal of your Ampliﬁ er.

Using the video signal cable(s), connect the HDMI , COMPONENT or VIDEO OUT terminals on the rear of the Blu-ray Disc Player to the HDMI, COMPONENT or VIDEO IN terminals of your TV as described on pages 20 to

24.

Turn on the Blu-ray Disc Player, TV, and Ampliﬁ er.

COMPONENT OUT

DIGITAL

AUDIO OUT

HDMI OUT

LAN

USB HOST

OPTICAL

AV OUT

DMI OUT

LAN

USB HOST

B H

HDMI OUT

DIGITAL

AUDIO OUT

OPTICAL

COMPONENT OUT

NENT OUT

AV OUT

Please turn the volume down when you turn on the Ampliﬁ er. Sudden loud sound may cause damage to the



speakers and your ears. Please set the audio in the menu screen according to the Ampliﬁ er. (See pages 35~36)

 

The position of terminals may vary depending on the Ampliﬁ er. Please refer to the user's manual of your Ampliﬁ er.



When using this connection, discs with LPCM audio soundtracks will only be heard over the front two channels.

26_ connections

CONNECTING TO AN AUDIO SYSTEM

AUDIO OU

COMPO

OST

(HDMI SUPPORTED AMPLIFIER)

Using the HDMI-HDMI cable (not included), connect the HDMI OUT terminal on the rear of the Blu-ray Disc

Player to the HDMI IN terminal of your Ampliﬁ er. Using the HDMI-HDMI cable, connect the HDMI OUT terminal of the Ampliﬁ er to the HDMI IN terminal of your

TV. Turn on the Blu-ray Disc Player, TV, and Ampliﬁ er.

Press the input select button of the Ampliﬁ er to select external input in order to hear sound from

the Blu-ray Disc Player. Refer to your Ampliﬁ er's user manual to set the Ampliﬁ er's audio input.

COMPONENT OUT

DIGITAL

AUDIO OUT

HDMI OUT

LAN

USB HOST

OPTICAL

AV OUT

LAN

USB HOST

B H

HDMI OUT

DIGITAL

IGITAL

AUDIO OUT

OPTICAL

COMPONENT OUT

NENT OUT

AV OUT

● CONNECTIONS

Please turn the volume down when you turn on the Ampliﬁ er. Sudden loud sound may cause damage to the



speakers and your ears. Please set the audio in the menu screen according to the Ampliﬁ er. (See pages 35~36)



The position of HDMI terminals may vary depending on the Ampliﬁ er. Please refer to the user's manual of your



Ampliﬁ er.

English _27

connections

AUDIO OU

COMPO

USB HOST

CONNECTING TO SAMSUNG’S UPDATE SERVER

You can update the player’s ﬁ rmware via Samsung’s server using the LAN jack. When the LAN jack is connected, the Blu-ray Disc Player will be connected to the update server automatically.

Using the Direct LAN Cable (UTP cable), connect the LAN terminal on the rear of the Blu-ray Disc Player to the

1. LAN terminal of your modem.

Connect for software upgrades from Samsung’s update server.

•

COMPONENT OUT

DIGITAL

AUDIO OUT

HDMI OUT

LAN

USB HOST

OPTICAL

AV OUT

DMI OUT

LAN

USB HOST

HDMI OUT

DIGITAL

IGITAL

AUDIO OUT

OPTICAL

COMPONENT OUT

NENT OUT

AV OUT

Broadband service



To LAN port

Connecting using a router

(e.g. DSL)

Broadband modem

(with integrated router)

Router

Broadband modem

Broadband

To LAN port

service

Internet access to Samsung’s update server may not be allowed, depending on the router you use or the ISP’s policy. For more information, contact your ISP (Internet Service Provider).

For DSL users, please use a router to make a network connection.

28_ connections

basic functions of your Blu-ray Disc Player

This section introduces basic playback functions and playback by disc type.

BEFORE PLAYING

•

Turn on your TV and set it to the correct Video Input (the input the Blu-ray Disc Player is connected to).

•

If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.

After plugging in the player, the ﬁ rst time you press the POWER button, this screen comes up:

If you want to select a language, press a NUMBER button. (This screen will only appear when you plug in the player for the ﬁ rst time.) If the language for the startup screen is not set, the settings may change whenever you turn the power on or off. Therefore, make sure that you select the language you want to use. Once you select a menu language, you can change it by pressing the unit for more than 5 seconds with no disc in the unit. Then the MENU LANGUAGE SELECTION window appears again where you can reset your preferred language.

Discs which cannot be played on this player.



• HD DVD • DVD+RW • DVD+R

• DVD-ROM • DVD-RAM • CDV

• CD-ROM • CVD • CD-I

• Super Audio CD(except CD layer) • CDGs play audio only, not graphics.

Discs which can be played on this player (For the following discs, the ability to play back may depend on



recording conditions.)

• BD-ROM • DVD-R • DVD-RW (V mode) • CD-RW/CD-R

• The unit may not play certain CD-RW/CD-R and DVD-R due to the disc type or recording conditions.

Blu-ray is a new and evolving format. Accordingly, disc compatibility issues with new and existing format discs



are possible. Not all discs are compatible and not every disc will playback. For additional information, refer to the Disc Type and Characteristics and Compliance and Compatibility Notice sections of this Manual. If you encounter compatibility problems, please contact SAMSUNG customer care center.

The unit cannot play CD-RW/CD-R and DVD-RW/-R with recorded content such as divx, avi, mpg, mov, wma,



mp3, digital photo view(JPEG) ﬁ le.

button on the front panel of the

MENU LANGUAGE SELECTION

Press 1 for English Pulsar 2 para Español Touche 3 pour Français

Macrovision : BBS42

● BASIC FUNCTIONS

English _29

basic functions of your Blu-ray Disc Player

ON-SCREEN MENU NAVIGATION

Video

Music

Setup

System Setup

Language Setup

Audio Setup

Display Setup

HDMI Setup

Network Setup

Parental Setup

Audio Subtitle Disc Menu Menu

TV Aspect Movie Frame (24 Fs) Resolution Screen Message Front Display

TCP/IP Proxy NTP Server MAC Address

System Information Time Zone Clock Set Power On/Off sound Persistent Storage Management System Update

Digital Output PCM Down Sampling Dynamic Compression

Anynet+ (HDMI-CEC) HDMI Format

Parental Lock Rating Level New Password

PLAYING A DISC

Press the OPEN/CLOSE ( ) button.

The STANDBY indicator light goes out and the tray opens. Place a disc gently into the tray with the disc’s label facing up.

Press the PLAY (

When you stop disc play, the player remembers where you stopped, so when you press PLAY ( ) button



again, it will pick up where you left off. Press the STOP (



To pause the playback, press the PAUSE (



To resume, press the PLAY ( ) button. If the player is left in the stop mode more than 10 minutes without any user interface, a screen saver will



appear on your TV. If the player is left in the screen saver mode for more than 30 minutes, the power will automatically turn off except during playback of an CDDA (Automatic Power-Off Function).

If no input is entered for more than 5 minutes in pause mode, the operation will stop (except for some Blu-ray



discs).

30_ basic functions

) button or OPEN/CLOSE ( ) button to close the disc tray.

) button twice during playback to disable the Resume function.

) button during playback.

+ 106 hidden pages