Samsung BD-P1000 User Manual

Software Update Procedure for BD-P1000

Introduction

This manual is described S/W update procedure for BD-P1000, please
following the below procedure. If you have any problems during S/W
updating, please contact Samsung Service Call Center.

How to make an update CD

Burn the downloaded file onto a blank CD-R or CD-RW disc, following
the below procedures.

1) Download the software update file from Samsung Internet site.
(www.samsung.com)

2) If the update file is compressed(*.zip/rar), the file should be uncompressed
before burning.

3) You must burn the update file on a blank CD-R/W disc by using
"Burn Image" option.
(Ref. "Recorder" menu

4) Burn a image file of the software update file (*.iso).

"Burn Image" in case of using Nero Burning ROM)

→

Notice

Recommended CD Burning Program

■

Nero Burning RO M

●

Burning Options (in case of using Nero Burning ROM)

■

"Recorder" m enu

●

image file of the software update file (*.iso).
Please Check "Finalize CD (No further w riting possible)".

●

Please refer to your ow n CD burning Program Manual if you want

●

to use any other CD burning program for burnig ISO image file.

Make sure if the downloaded software is eligible for your BD-P1000.

■

(cf. CD image file name : XXXXXX_XX_BDP1000XAA.iso)

The Software update will not be executed if using the update CD made

■

with NOT following the upper procedures.)

"Burn Image"

→

Select an uncompressed

→

Update Procedure

WARNING

It is very important ; please read the below notice below before updating
your unit.
The following events may interrupt the update process and MAY RESULT IN
PERMANENT DAMAGE TO THE UNIT WHILE UPDATING.

. Unplugging the power cord.

Ⅰ

. Power Outage.

Ⅱ

. Dirt or Scratches on the disc.

Ⅲ

. Opening a disc tray during processing.

Ⅳ

1) Press OPEN/CLOSE to open the disc tray.

2) Insert the update CD-R disc with the software update, label facing up.

3) Press OPEN/CLOSE to close the disc tray.

System F/W Update
Do you want to update System F/W
PSD:YYMMDD.xx -> %YYMMDD.xx
LDR:XXX
DMN:YYMMDD.xx -> YYMMDD.xx

After checking old and new version,
select "Yes" or "No" with "◀" or "▶"
on the remote control.
If you select "No", BD-P1000 will be
powered off after ejecting the tray.

The Version is indicated by

Yes No

If you don't see the message above, try another disc.

※

※

"YYMMDD.xx"

Generally, this is caused by disc quality and by disc creating problem.

4) Press the ENTER button on the remote control.

Main F/W Update
Now, Processing...
Please, do not turn off the power.

You will see "CD-UP" on FLT Display.